| Age | Commit message (Collapse) | Author |
|---|
|
I incorrectly diagnosed the reason why hoverfly is unhappy.
Looking closer, it appears that it fails to link libldap
unless libssl is also present; so the problem was my
idea of clearing LIBS before making the check. Revert
to essentially the original coding, except that instead
of failing when libldap_r isn't there, use libldap.
Per buildfarm member hoverfly.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
|
|
In commit d0a02bdb8, I'd supposed that uniformly probing for
ldap_bind would make the intent clearer. However, that seems
not to work on AIX, for obscure reasons (maybe it's a macro
there?). Revert to the former behavior of probing
ldap_simple_bind for thread-safe cases and ldap_bind otherwise.
Per buildfarm member hoverfly.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
|
|
The separate libldap_r is gone and libldap itself is now always
thread-safe. Unfortunately there seems no easy way to tell by
inspection whether libldap is thread-safe, so we have to take
it on faith that libldap is thread-safe if there's no libldap_r.
That should be okay, as it appears that libldap_r was a standard
part of the installation going back at least 20 years.
Report and patch by Adrian Ho. Back-patch to all supported
branches, since people might try to build any of them with
a newer OpenLDAP.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
|
|
Since the executor can't cope with a utility statement appearing
as a node of a plan tree, we can't support cases where a rewrite
rule inserts a NOTIFY into an INSERT/UPDATE/DELETE command appearing
in a WITH clause of a larger query. (One can imagine ways around
that, but it'd be a new feature not a bug fix, and so far there's
been no demand for it.) RewriteQuery checked for this, but it
missed the case where the DML command rewrites to *only* a NOTIFY.
That'd lead to crashes later on in planning. Add the missed check,
and improve the level of testing of this area.
Per bug #17094 from Yaoguang Chen. It's been busted since WITH
was introduced, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17094-bf15dff55eaf2e28@postgresql.org
|
|
Commit 6753333f stopped using semaphores as the sleep/wake mechanism for
heavyweight locks, but some obsolete references to that scheme remained
in comments. As with similar commit 25b93a29, back-patch all the way.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CA%2BhUKGLafjB1uzXcy%3D%3D2L3cy7rjHkqOVn7qRYGBjk%3D%3DtMJE7Yg%40mail.gmail.com
|
|
I accidentally missed adding this when adjusting 55fe60938 for back
patching. This adjustment was made for 9.6 to 13. 14 and master are not
affected.
Discussion: https://postgr.es/m/CAApHDvp=twCsGAGQG=A=cqOaj4mpknPBW-EZB-sd+5ZS5gCTtA@mail.gmail.com
|
|
Due to how pg_size_pretty(bigint) was implemented, it's possible that when
given a negative number of bytes that the returning value would not match
the equivalent positive return value when given the equivalent positive
number of bytes. This was due to two separate issues.
1. The function used bit shifting to convert the number of bytes into
larger units. The rounding performed by bit shifting is not the same as
dividing. For example -3 >> 1 = -2, but -3 / 2 = -1. These two
operations are only equivalent with positive numbers.
2. The half_rounded() macro rounded towards positive infinity. This meant
that negative numbers rounded towards zero and positive numbers rounded
away from zero.
Here we fix #1 by dividing the values instead of bit shifting. We fix #2
by adjusting the half_rounded macro always to round away from zero.
Additionally, adjust the pg_size_pretty(numeric) function to be more
explicit that it's using division rather than bit shifting. A casual
observer might have believed bit shifting was used due to a static
function being named numeric_shift_right. However, that function was
calculating the divisor from the number of bits and performed division.
Here we make that more clear. This change is just cosmetic and does not
affect the return value of the numeric version of the function.
Here we also add a set of regression tests both versions of
pg_size_pretty() which test the values directly before and after the
function switches to the next unit.
This bug was introduced in 8a1fab36a. Prior to that negative values were
always displayed in bytes.
Author: Dean Rasheed, David Rowley
Discussion: https://postgr.es/m/CAEZATCXnNW4HsmZnxhfezR5FuiGgp+mkY4AzcL5eRGO4fuadWg@mail.gmail.com
Backpatch-through: 9.6, where the bug was introduced.
|
|
As in 50371df26, this is a bad idea since the callback can't really
know what error is being thrown and thus whether or not it is safe
to attempt catalog accesses. Rather than pushing said accesses into
the mainline code where they'd usually be a waste of cycles, we can
look at the query's rangetable instead.
This change does mean that we'll be printing query aliases (if any
were used) rather than the table or column's true name. But that
doesn't seem like a bad thing: it's certainly a more useful definition
in self-join cases, for instance. In any case, it seems unlikely that
any applications would be depending on this detail, so it seems safe
to change.
Patch by me. Original complaint by Andres Freund; Bharath Rupireddy
noted the connection to conversion_error_callback.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
|
|
Our code has supported fractional-minute UTC offsets for ages, but
there was no mention of the possibility in the main docs, and only
a very indirect reference in Appendix B. Improve that.
Discussion: https://postgr.es/m/162543102827.697.5755498651217979813@wrigleys.postgresql.org
|
|
Commit 03ffc4d6d added logic to bypass all caching behavior in
LookupOpclassInfo when CLOBBER_CACHE_ALWAYS is enabled. It doesn't
look like I stopped to think much about what that would cost, but
recent investigation shows that the cost is enormous: it roughly
doubles the time needed for cache-clobber test runs.
There does seem to be value in this behavior when trying to test
the opclass-cache loading logic itself, but for other purposes the
cost is excessive. Hence, let's back off to doing this only when
debug_invalidate_system_caches_always is at least 3; or in older
branches, when CLOBBER_CACHE_RECURSIVELY is defined.
While here, clean up some other minor issues in LookupOpclassInfo.
Re-order the code so we aren't left with broken cache entries (leading
to later core dumps) in the unlikely case that we suffer OOM while
trying to allocate space for a new entry. (That seems to be my
oversight in 03ffc4d6d.) Also, in >= v13, stop allocating one array
entry too many. That's evidently left over from sloppy reversion in
851b14b0c.
Back-patch to all supported branches, mainly to reduce the runtime
of cache-clobbering buildfarm animals.
Discussion: https://postgr.es/m/1370856.1625428625@sss.pgh.pa.us
|
|
Author: Greg Sabino Mullane
Discussion: https://postgr.es/m/CAKAnmmJYH2FBn_+Vwd2FD5SaKn8hjhAXOCHpZc6n4wXaUaW_SA@mail.gmail.com
Backpatch-through: 9.6
|
|
Document that setting maintenance_work_mem to values over 1GB has no
effect on VACUUM.
Reported-by: Martín Marqués
Author: Laurenz Albe
Discussion: https://postgr.es/m/CABeG9LsZ2ozUMcqtqWu_-GiFKB17ih3p8wBHXcpfnHqhCnsc7A%40mail.gmail.com
Backpatch-through: 9.6, oldest supported release
|
|
Reported-by: tom@crystae.net
Discussion: https://postgr.es/m/162345756191.14472.9754568432103008703@wrigleys.postgresql.org
Backpatch-through: 9.6
|
|
|
|
These are the same as world and install-world respectively, but without
building or installing the documentation. There are many reasons for
wanting to be able to do this, including speed, lack of documentation
building tools, and wanting to build other formats of the documentation.
Plans for simplifying the buildfarm client code include using these
targets.
Backpatch to all live branches.
Discussion: https://postgr.es/m/6a421136-d462-b043-a8eb-e75b2861f3df@dunslane.net
|
|
The prove_installcheck recipe in src/Makefile.global.in was emitting
bogus paths for a couple of elements when used with PGXS. Here we create
a separate recipe for the PGXS case that does it correctly. We also take
the opportunity to make the make the file more readable by breaking up
the prove_installcheck and prove_check recipes across several lines, and
to remove the setting for REGRESS_SHLIB to src/test/recovery/Makefile,
which is the only set of tests that actually need it.
Backpatch to all live branches
Discussion: https://postgr.es/m/f2401388-936b-f4ef-a07c-a0bcc49b3300@dunslane.net
|
|
Reaching PITR on such a transaction would cause the generation of a LOG
message mentioning a transaction committed, not aborted.
Oversight in 4f1b890.
Author: Simon Riggs
Discussion: https://postgr.es/m/CANbhV-GJ6KijeCgdOrxqMCQ+C8QiK657EMhCy4csjrPcEUFv_Q@mail.gmail.com
Backpatch-through: 9.6
|
|
Causing a core dump on out-of-memory seems pretty unfriendly,
and surely is far outside the expected behavior of a general-purpose
library. Just print an error message (as we did already) and return.
These functions unfortunately don't have an error return convention,
but code using them is probably just looking for a quick-n-dirty
print method and wouldn't bother to check anyway.
Although these functions are semi-deprecated, it still seems
appropriate to back-patch this. In passing, also back-patch
b90e6cef1, just to reduce cosmetic differences between the
branches.
Discussion: https://postgr.es/m/3122443.1624735363@sss.pgh.pa.us
|
|
83158f7 has improved index_set_state_flags() so as it is possible to use
transactional updates when updating pg_index state flags, but there was
not really a test case which stressed directly the possibility it fixed.
This commit adds such a test, using a predicate that looks valid in
appearance but calls a stable function.
Author: Andrey Lepikhov
Discussion: https://postgr.es/m/9b905019-5297-7372-0ad2-e1a4bb66a719@postgrespro.ru
Backpatch-through: 9.6
|
|
3c84046 is the original commit that introduced index_set_state_flags(),
where the presence of SnapshotNow made necessary the use of an in-place
update. SnapshotNow has been removed in 813fb03, so there is no actual
reasons to not make this operation transactional.
As reported by Andrey, it is possible to trigger the assertion of this
routine expecting no transactional updates when switching the pg_index
state flags, using a predicate mark as immutable but calling stable or
volatile functions. 83158f7 has been around for a couple of months on
HEAD now with no issues found related to it, so it looks safe enough for
a backpatch.
Reported-by: Andrey Lepikhov
Author: Michael Paquier
Reviewed-by: Anastasia Lubennikova
Discussion: https://postgr.es/m/20200903080440.GA8559@paquier.xyz
Discussion: https://postgr.es/m/9b905019-5297-7372-0ad2-e1a4bb66a719@postgrespro.ru
Backpatch-through: 9.6
|
|
specscanner.l leaked a kilobyte of memory per token of the spec file.
Apparently somebody thought that the introductory code block would be
executed once; but it's once per yylex() call.
A couple of functions in isolationtester.c leaked small amounts of
memory due to not bothering to free one-time allocations. Might
as well improve these so that valgrind gives this program a clean
bill of health. Also get rid of an ugly static variable.
Coverity complained about one of the one-time leaks, which led me
to try valgrind'ing isolationtester, which led to discovery of the
larger leak.
|
|
It's not really necessary for this function to open or lock the
relation associated with the pg_policy entry it's modifying. The
error checks it's making on the rel are if anything counterproductive
(e.g., if we don't want to allow installation of policies on system
catalogs, here is not the place to prevent that). In particular, it
seems just wrong to insist on an ownership check. That has the net
effect of forcing people to use superuser for DROP OWNED BY, which
surely is not an effect we want. Also there is no point in rebuilding
the dependencies of the policy expressions, which aren't being
changed. Lastly, locking the table also seems counterproductive; it's
not helping to prevent race conditions, since we failed to re-read the
pg_policy row after acquiring the lock. That means that concurrent
DDL would likely result in "tuple concurrently updated/deleted"
errors; which is the same behavior this code will produce, with less
overhead.
Per discussion of bug #17062. Back-patch to all supported versions,
as the failure cases this eliminates seem just as undesirable in 9.6
as in HEAD.
Discussion: https://postgr.es/m/1573181.1624220108@sss.pgh.pa.us
|
|
This back-branch test script was later absorbed into
insert-conflict-specconflict.spec, which required some stabilization
in commit 741d7f104, so perhaps it's not surprising that it needs a
bit of love too.
It's odd though that we hadn't seen it fail before now, because
I thought that 741d7f104 did not change isolationtester's timing
behavior for scripts without any annotation markers. In any case,
this script is racy on its face, so add an annotation to force stable
reporting order.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=piculet&dt=2021-06-24%2009%3A54%3A56
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=petalura&dt=2021-06-24%2010%3A10%3A00
|
|
In previous commit, I missed that relmap_redo() was also not acquiring the
RelationMappingLock. Thanks to Thomas Munro for pointing that out.
Backpatch-through: 9.6, like previous commit.
Discussion: https://www.postgresql.org/message-id/CA%2BhUKGLev%3DPpOSaL3WRZgOvgk217et%2BbxeJcRr4eR-NttP1F6Q%40mail.gmail.com
|
|
Contrary to the comment here, POSIX does not guarantee atomicity of a
read(), if another process calls write() concurrently. Or at least Linux
does not. Add locking to load_relmap_file() to avoid the race condition.
Fixes bug #17064. Thanks to Alexander Lakhin for the report and test case.
Backpatch-through: 9.6, all supported versions.
Discussion: https://www.postgresql.org/message-id/17064-bb0d7904ef72add3@postgresql.org
|
|
Reported-by: Simon Riggs
Author: Takamichi Osumi
Reviewed-by: Amit Kapila
Backpatch-through: 9.6
Discussion: https://www.postgresql.org/message-id/20210222222847.tpnb6eg3yiykzpky@alap3.anarazel.de
|
|
I happened to notice that if compiled --with-gssapi, 9.6's
contrib/pgcrypto tests report memory stomps for some SHA operations.
Both MEMORY_CONTEXT_CHECKING and valgrind agree there's a problem,
though nothing crashes; it appears that the buffer overrun
only extends into alignment padding, at least on 64-bit hardware.
Investigation found that pgcrypto's references to SHA224_Init
et al were being captured by the system OpenSSL library, which
of course has slightly incompatible definitions of those functions.
We long ago noticed this problem with respect to the sibling
functions SHA256_Init and so on, and commit 56f44784f introduced
renaming macros to dodge the problem for those. However, it didn't
cover the SHA224 family because we didn't use that at the time.
When commit 1abf76e82 added those awhile later, it neglected to add
a similar renaming macro. Better late than never, so do so now.
This appears to affect all branches 8.2 - 9.6, so it's surprising
nobody noticed before now. Maybe the effect is somehow specific
to the way RHEL8 intertwines its GSS and SSL libraries? Anyway,
we refactored all this stuff in v10, so newer branches don't have
the problem.
|
|
For no obvious reason, isolationtester has always insisted that
session and step names be written with double quotes. This is
fairly tedious and does little for test readability, especially
since the names that people actually choose almost always look
like normal identifiers. Hence, let's tweak the lexer to allow
SQL-like identifiers not only double-quoted strings.
(They're SQL-like, not exactly SQL, because I didn't add any
case-folding logic. Also there's no provision for U&"..." names,
not that anyone's likely to care.)
There is one incompatibility introduced by this change: if you write
"foo""bar" with no space, that used to be taken as two identifiers,
but now it's just one identifier with an embedded quote mark.
I converted all the src/test/isolation/ specfiles to remove
unnecessary double quotes, but stopped there because my
eyes were glazing over already.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/759113.1623861959@sss.pgh.pa.us
|
|
The syntax summaries for CREATE FUNCTION and allied commands
made it look like LEAKPROOF is an alternative to
IMMUTABLE/STABLE/VOLATILE, when of course it is an orthogonal
option. Improve that.
Per gripe from aazamrafeeque0. Thanks to David Johnston for
suggestions.
Discussion: https://postgr.es/m/162444349581.694.5818572718530259025@wrigleys.postgresql.org
|
|
Our uses of gss_display_status() and gss_display_name() assumed
that the gss_buffer_desc strings returned by those functions are
null-terminated. It appears that they generally are, given the
lack of field complaints up to now. However, the available
documentation does not promise this, and some man pages
for gss_display_status() show examples that rely on the
gss_buffer_desc.length field instead of expecting null
termination. Also, we now have a report that on some
implementations, clang's address sanitizer is of the opinion
that the byte after the specified length is undefined.
Hence, change the code to rely on the length field instead.
This might well be cosmetic rather than fixing any real bug, but
it's hard to be sure, so back-patch to all supported branches.
While here, also back-patch the v12 changes that made pg_GSS_error
deal honestly with multiple messages available from
gss_display_status.
Per report from Sudheer H R.
Discussion: https://postgr.es/m/5372B6D4-8276-42C0-B8FB-BD0918826FC3@tekenlight.com
|
|
Previously, isolationtester displayed SQL query results using some
ad-hoc code that clearly hadn't had much effort expended on it.
Field values longer than 14 characters weren't separated from
the next field, and usually caused misalignment of the columns
too. Also there was no visual separation of a query's result
from subsequent isolationtester output. This made test result
files confusing and hard to read.
To improve matters, let's use libpq's PQprint() function. Although
that's long since unused by psql, it's still plenty good enough
for the purpose here.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/582362.1623798221@sss.pgh.pa.us
|
|
We've long contended with isolation test results that aren't entirely
stable. Some test scripts insert long delays to try to force stable
results, which is not terribly desirable; but other erratic failure
modes remain, causing unrepeatable buildfarm failures. I've spent a
fair amount of time trying to solve this by improving the server-side
support code, without much success: that way is fundamentally unable
to cope with diffs that stem from chance ordering of arrival of
messages from different server processes.
We can improve matters on the client side, however, by annotating
the test scripts themselves to show the desired reporting order
of events that might occur in different orders. This patch adds
three types of annotations to deal with (a) test steps that might or
might not complete their waits before the isolationtester can see them
waiting; (b) test steps in different sessions that can legitimately
complete in either order; and (c) NOTIFY messages that might arrive
before or after the completion of a step in another session. We might
need more annotation types later, but this seems to be enough to deal
with the instabilities we've seen in the buildfarm. It also lets us
get rid of all the long delays that were previously used, cutting more
than a minute off the runtime of the isolation tests.
Back-patch to all supported branches, because the buildfarm
instabilities affect all the branches, and because it seems desirable
to keep isolationtester's capabilities the same across all branches
to simplify possible future back-patching of tests.
Discussion: https://postgr.es/m/327948.1623725828@sss.pgh.pa.us
|
|
Ordinarily, a pg_policy.polroles array wouldn't list the same role
more than once; but CREATE POLICY does not prevent that. If we
perform DROP OWNED BY on a role that is listed more than once,
RemoveRoleFromObjectPolicy either suffered an assertion failure
or encountered a tuple-updated-by-self error. Rewrite it to cope
correctly with duplicate entries, and add a CommandCounterIncrement
call to prevent the other problem.
Per discussion, there's other cleanup that ought to happen here,
but this seems like the minimum essential fix.
Per bug #17062 from Alexander Lakhin. It's been broken all along,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17062-11f471ae3199ca23@postgresql.org
|
|
This works fine in the "simple Query" code path; but if the
statement is in the plan cache then it's corrupted for future
re-execution. Apply copyObject() to protect the original
tree from modification, as we've done elsewhere.
This narrow fix is applied only to the back branches. In HEAD,
the problem was fixed more generally by commit 7c337b6b5; but
that changed ProcessUtility's API, so it's infeasible to
back-patch.
Per bug #17053 from Charles Samborski.
Discussion: https://postgr.es/m/931771.1623893989@sss.pgh.pa.us
Discussion: https://postgr.es/m/17053-3ca3f501bbc212b4@postgresql.org
|
|
The original patch only targeted Python 2.6 and newer, since that is
what we have supported in PostgreSQL 13 and newer. For older
branches, we need to fix it up for older Python versions.
|
|
One of the error paths left *members uninitialized. That's not a live
bug, because most callers don't look at *members when the function
returns -1, but let's be tidy. One caller, in heap_lock_tuple(), does
"if (members != NULL) pfree(members)", but AFAICS it never passes an
invalid 'multi' value so it should not reach that error case.
The callers are also a bit inconsistent in their expectations.
heap_lock_tuple() pfrees the 'members' array if it's not-NULL, others
pfree() it if "nmembers >= 0", and others if "nmembers > 0". That's
not a live bug either, because the function should never return 0, but
add an Assert for that to make it more clear. I left the callers alone
for now.
I also moved the line where we set *nmembers. It wasn't wrong before,
but I like to do that right next to the 'return' statement, to make it
clear that it's always set on return.
Also remove one unreachable return statement after ereport(ERROR), for
brevity and for consistency with the similar if-block right after it.
Author: Greg Nancarrow with the additional changes by me
Backpatch-through: 9.6, all supported versions
|
|
Starting with Python 3.10, the stacktrace looks differently:
- PL/Python function "subtransaction_exit_subtransaction_in_with", line 3, in <module>
- s.__exit__(None, None, None)
+ PL/Python function "subtransaction_exit_subtransaction_in_with", line 2, in <module>
+ with plpy.subtransaction() as s:
Using try/except specifically makes the error look always the same.
(See https://github.com/python/cpython/pull/25719 for the discussion
of this change in Python.)
Author: Honza Horak <hhorak@redhat.com>
Discussion: https://www.postgresql.org/message-id/flat/853083.1620749597%40sss.pgh.pa.us
RHBZ: https://bugzilla.redhat.com/show_bug.cgi?id=1959080
|
|
In a synchronous logical setup, locking [user] catalog tables can cause
deadlock. This is because logical decoding of transactions can lock
catalog tables to access them so exclusively locking those in transactions
can lead to deadlock. To avoid this users must refrain from having
exclusive locks on catalog tables.
Author: Takamichi Osumi
Reviewed-by: Vignesh C, Amit Kapila
Backpatch-through: 9.6
Discussion: https://www.postgresql.org/message-id/20210222222847.tpnb6eg3yiykzpky%40alap3.anarazel.de
|
|
This is useful for developers to find out if an isolation spec is
over-engineered or if it needs more work by warning at the end of a
test run if a step is not used, generating a failure with extra diffs.
While on it, clean up all the specs which include steps not used in any
permutations to simplify them.
This is a backpatch of 989d23b and 06fdc4e, as it is becoming useful to
make all the branches consistent for an upcoming patch that will improve
the output generated by isolationtester.
Author: Michael Paquier
Reviewed-by: Asim Praveen, Melanie Plageman
Discussion: https://postgr.es/m/20190819080820.GG18166@paquier.xyz
Discussion: https://postgr.es/m/794820.1623872009@sss.pgh.pa.us
Backpatch-through: 9.6
|
|
The original purpose of the dry-run mode is to be able to print all the
possible permutations from a spec file, but it has become less useful
since isolation tests have improved regarding deadlock detection as one
step not wanted by the author could block indefinitely now (originally
the step blocked would have been detected rather quickly). Per
discussion, let's remove it.
This is a backpatch of 9903338 for 9.6~12. It is proving to become
useful to have on those branches so as the code gets consistent across
all supported versions, as a matter of improving the output generated by
isolationtester.
Author: Michael Paquier
Reviewed-by: Asim Praveen, Melanie Plageman
Discussion: https://postgr.es/m/20190819080820.GG18166@paquier.xyz
Discussion: https://postgr.es/m/794820.1623872009@sss.pgh.pa.us
Backpatch-through: 9.6
|
|
When stuffing a plan from the plancache into a Portal, one is
not supposed to risk throwing an error between GetCachedPlan and
PortalDefineQuery; if that happens, the plan refcount incremented
by GetCachedPlan will be leaked. I managed to break this rule
while refactoring code in 9dbf2b7d7. There is no visible
consequence other than some memory leakage, and since nobody is
very likely to trigger the relevant error conditions many times
in a row, it's not surprising we haven't noticed. Nonetheless,
it's a bug, so rearrange the order of operations to remove the
hazard.
Noted on the way to looking for a better fix for bug #17053.
This mistake is pretty old, so back-patch to all supported
branches.
|
|
TestLib::perl2host can take a file argument as well as a directory
argument, so that code becomes substantially simpler. Also add comments
on why we're using forward slashes, and why we're setting
PERL_BADLANG=0.
Discussion: https://postgr.es/m/e9947bcd-20ee-027c-f0fe-01f736b7e345@dunslane.net
|
|
During decoding for speculative inserts, we were relying for cleaning
toast hash on confirmation records or next change records. But that
could lead to multiple problems (a) memory leak if there is neither a
confirmation record nor any other record after toast insertion for a
speculative insert in the transaction, (b) error and assertion failures
if the next operation is not an insert/update on the same table.
The fix is to start queuing spec abort change and clean up toast hash
and change record during its processing. Currently, we are queuing the
spec aborts for both toast and main table even though we perform cleanup
while processing the main table's spec abort record. Later, if we have a
way to distinguish between the spec abort record of toast and the main
table, we can avoid queuing the change for spec aborts of toast tables.
Reported-by: Ashutosh Bapat
Author: Dilip Kumar
Reviewed-by: Amit Kapila
Backpatch-through: 9.6, where it was introduced
Discussion: https://postgr.es/m/CAExHW5sPKF-Oovx_qZe4p5oM6Dvof7_P+XgsNAViug15Fm99jA@mail.gmail.com
|
|
Recent glibc versions have made mktime() fail if tm_isdst is
inconsistent with the prevailing timezone; in particular it fails for
tm_isdst = 1 when the zone is UTC. (This seems wildly inconsistent
with the POSIX-mandated treatment of "incorrect" values for the other
fields of struct tm, so if you ask me it's a bug, but I bet they'll
say it's intentional.) This has been observed to cause cosmetic
problems when pg_restore'ing an archive created in a different
timezone.
To fix, do mktime() using the field values from the archive, and if
that fails try again with tm_isdst = -1. This will give a result
that's off by the UTC-offset difference from the original zone, but
that was true before, too. It's not terribly critical since we don't
do anything with the result except possibly print it. (Someday we
should flush this entire bit of logic and record a standard-format
timestamp in the archive instead. That's not okay for a back-patched
bug fix, though.)
Also, guard our only other use of mktime() by having initdb's
build_time_t() set tm_isdst = -1 not 0. This case could only have
an issue in zones that are DST year-round; but I think some do exist,
or could in future.
Per report from Wells Oliver. Back-patch to all supported
versions, since any of them might need to run with a newer glibc.
Discussion: https://postgr.es/m/CAOC+FBWDhDHO7G-i1_n_hjRzCnUeFO+H-Czi1y10mFhRWpBrew@mail.gmail.com
|
|
Translate path slashes on target directory path. This was confusing old
branches, but is applied to all branches for the sake of uniformity.
Perl is perfectly able to understand paths with forward slashes.
Along the way, restore the previous archive_wait query, for the sake of
uniformity with other tests, per gripe from Tom Lane.
|
|
This is similar to the work done in 8279f68 for TestLib.pm, where
environment variables set may cause unwanted failures if using a
temporary installation with pg_regress. The list of variables reset is
adjusted in each stable branch depending on what is supported.
Comments are added to remember that the lists in TestLib.pm and
pg_regress.c had better be kept in sync.
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/YMNR9GYDn+fHlMta@paquier.xyz
Backpatch-through: 9.6
|
|
Previously, a zero value for the relfilenode resulted in
a confusing error message about "unexpected duplicate".
This function returns NULL for other invalid relfilenode
values, so zero should be treated likewise.
It's been like this all along, so back-patch to all supported
branches.
Justin Pryzby
Discussion: https://postgr.es/m/20210612023324.GT16435@telsasoft.com
|
|
Commit caba8f0d43 wasn't quite right for msys, as demonstrated by
several buildfarm animals, including jacana and fairywren. We need to
use the msys perl in the archive command, but call it in such a way that
Windows will understand the path. Furthermore, inside the copy script we
need to convert a Windows path to an msys path.
|
|
This variable was present in the list added by 9d660670, but it is not
supported by this branch. Issue noticed while diving into a similar
change for pg_regress.c.
Backpatch-through: 9.6
|
|
Per buildfarm member conchuela and Kyotaro Horiguchi, it's possible
for the WAL segment that the cascading standby needs to be removed
too quickly. Hopefully this will prevent that.
Kyotaro Horiguchi
Discussion: http://postgr.es/m/20210610.101240.1270925505780628275.horikyota.ntt@gmail.com
|
