| Age | Commit message (Collapse) | Author |
|---|
|
This commit moves pg_pwritev_with_retry(), a convenience wrapper of
pg_writev() able to handle partial writes, to common/file_utils.c so
that the frontend code is able to use it. A first use-case targetted
for this routine is pg_basebackup and pg_receivewal, for the
zero-padding of a newly-initialized WAL segment. This is used currently
in the backend when the GUC wal_init_zero is enabled (default).
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Thomas Munro
Discussion: https://postgr.es/m/CALj2ACUq7nAb7=bJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA@mail.gmail.com
|
|
As the recent commit 05d4cbf (reverted after as a448e49) has proved,
there is zero coverage for the four SQL functions that can scan the
control file data:
- pg_control_checkpoint()
- pg_control_init()
- pg_control_recovery()
- pg_control_system()
This commit adds a minimal coverage for these functions, checking that
their execution is able to complete. This would have been enough to
catch the problems introduced in the commit mentioned above. More
checks could be done for each individual fields, but it is unclear
whether this would be better than the other checks in place in the
backend code.
Per discussion with Bharath Rupireddy.
Discussion: https://postgr.es/m/Y1d2FZmQmyAhPSRG@paquier.xyz
|
|
These numbers are strictly-monotone identifiers assigned to each rule
of pg_hba_file_rules and each map of pg_ident_file_mappings when loading
the HBA and ident configuration files, indicating the order in which
they are checked at authentication time, until a match is found.
With only one file loaded currently, this is equivalent to the line
numbers assigned to the entries loaded if one wants to know their order,
but this becomes mandatory once the inclusion of external files is
added to the HBA and ident files to be able to know in which order the
rules and/or maps are applied at authentication. Note that NULL is used
when a HBA or ident entry cannot be parsed or validated, aka when an
error exists, contrary to the line number.
Bump catalog version.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
|
|
The intention behind 1b73d0b was to limit the use of TokenizedAuthLine,
but I have fat-fingered one location in parse_hba_line() when creating
the HbaLine, where this should use the local variable and not the value
coming from TokenizedAuthLine. This logic is the exactly the same, but
let's be clean about all that on consistency grounds.
Reported-by: Julien Rouhaud
Discussion: https://postgr.es/m/20221026032730.k3sib5krgm7l6njk@jrouhaud
|
|
This has the advantage to limit the presence of the GUC values
hba_file and ident_file to the code paths where these files are loaded,
easing the introduction of an upcoming feature aimed at adding inclusion
logic for files and directories in HBA and ident files.
Note that this needs the addition of the source file name to HbaLine, in
addition to the line number, which is something needed by the backend in
two places of auth.c (authentication failure details and auth_id log
when log_connections is enabled).
While on it, adjust a log generated on authentication failure to report
the name of the actual HBA file on which the connection attempt matched,
where the line number and the raw line written in the HBA file were
already included. This was previously hardcoded as pg_hba.conf, which
would be incorrect when a custom value is used at postmaster startup for
the GUC hba_file.
Extracted from a larger patch by the same author.
Author: Julien Rouhaud
Discussion: https://postgr.es/m/20220223045959.35ipdsvbxcstrhya@jrouhaud
|
|
The IsCTIDVar() tests in nodeTidscan.c and nodeTidrangescan.c
look buggy at first sight: they aren't checking that the varno
matches the table to be scanned. Actually they're safe because
any Var in a scan-level qual must be for the correct table ...
but if we're depending on that, it's pretty pointless to verify
varlevelsup. (Besides which, varlevelsup is *always* zero at
execution, since we've flattened the rangetable long since.)
Remove the useless varlevelsup check, and instead add some
commentary explaining why we don't need to check varno.
Noted while fooling with a planner change that causes the order
of "t1.ctid = t2.ctid" to change in some tidscan.sql tests;
I was briefly fooled into thinking there was a live bug here.
|
|
Commit 06da3c570f changed the way subtransactions are marked as
SUBCOMMITTED, but the example it included actually documented the old
way. Update it.
Author: Japin Li
Discussion: https://www.postgresql.org/message-id/MEYP282MB16690BC96DFBE08CC857E1E3B6319%40MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
|
|
This adjusts a few things for GUCs related to logical replication,
replication slots and WAL senders, in the shape of incorrect comments
and values inconsistent with their initial default value.
Author: Peter Smith
Reviewed-by: Nathan Bossart, Tom Lane, Justin Pryzby
Discussion: https://postgr.es/m/CAHut+PtHE0XSfjjRQ6D4v7+dqzCw=d+1a64ujra4EX8aoc_Z+w@mail.gmail.com
|
|
Commit f357233c assumed that it was OK to return ENOENT directly if
lstat() failed that way. If we got STATUS_DELETE_PENDING while trying
to unlink a file that we had already unlinked successfully once before
but someone else still had open (on a kernel version that has "pending"
unlinks by default), then we would no longer reach the retry loop in
pgunlink(). That loop claims to be only for handling sharing violations
(a different phenomenon), but the errno is the same.
Restore that behavior with an explicit check, to see if it fixes the
occasional 'directory not empty' failures seen in the pg_upgrade tests
on CI. Further improvements are possible with proposed upgrades to
modern Windows APIs that would replace this convoluted code.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/20220920013122.GA31833%40telsasoft.com
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
|
|
Commit c5cb8f3b supposed that we'd only ever have to follow one junction
point in stat(), because we don't construct longer chains of them ourselves.
When examining a parent directory supplied by the user, we should really be
able to cope with longer chains, just in case someone has their system
set up that way. Choose an arbitrary cap of 8, to match the minimum
acceptable value of SYMLOOP_MAX in POSIX.
Previously I'd avoided reporting ELOOP thinking Windows didn't have it,
but it turns out that it does, so we can use the proper error number.
Reviewed-by: Roman Zharkov <r.zharkov@postgrespro.ru>
Discussion: https://postgr.es/m/CA%2BhUKGJ7JDGWYFt9%3D-TyJiRRy5q9TtPfqeKkneWDr1XPU1%2Biqw%40mail.gmail.com
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
|
|
Since commit c5cb8f3b taught stat() to follow symlinks, and since initdb
uses pg_mkdir_p(), and that examines parent directories, our humble
readlink() implementation can now be exposed to junction points not of
PostgreSQL origin. Those might be corrupted by our naive path mangling,
which doesn't really understand NT paths in general.
Simply decline to transform paths that don't look like a drive absolute
path. That means that readlink() returns the NT path directly when
checking a parent directory of PGDATA that happen to point to a drive
using "rooted" format. That works for the purposes of our stat()
emulation.
Reported-by: Roman Zharkov <r.zharkov@postgrespro.ru>
Reviewed-by: Roman Zharkov <r.zharkov@postgrespro.ru>
Discussion: https://postgr.es/m/4590c37927d7b8ee84f9855d83229018%40postgrespro.ru
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
|
|
When using junction points to emulate symlinks on Windows, one edge case
was not handled correctly by commit c5cb8f3b: if a junction point is
broken (pointing to a non-existent path), we'd report ENOENT. This
doesn't break any known use case, but was noticed while developing a
test suite for these functions and is fixed here for completeness.
Also add translation ERROR_CANT_RESOLVE_FILENAME -> ENOENT, as that is
one of the errors Windows can report for some kinds of broken paths.
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
|
|
Ancient bug noticed while working on a test suite for these functions.
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
|
|
Ancient bug noticed while working on a test suite for these functions.
https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
|
|
This entry was listed as a "string", but it is a "number. The other
fields are correctly described, on a second look.
Reported-by: Nuko Yokohama
Author: Tatsuo Ishii
Discussion: https://postgr.es/m/CAF3Gu1awoVoDP5d0_eN=cR=QkGVwH+OtFvwJkkc5cB_ZMWjyeA@mail.gmail.com
Backpatch-through: 15
|
|
Oversight in 7103ebb7aae8. Backpatch to 15.
Author: Richard Guo <guofenglinux@gmail.com>
Discussion: https://postgr.es/m/CAMbWs48gnDjZXq3-b56dVpQCNUJ5hD9kdtWN4QFwKCEapspNsA@mail.gmail.com
|
|
Commit df3737a651f4 added an incorrect assertion about the preconditions
for invoking the backup cleanup callback: it misfires at session end in
case a backup completes successfully. Fix it, using coding from Michaël
Paquier. Also add some tests for the various cases.
Reported by Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20221021.161038.1277961198945653224.horikyota.ntt@gmail.com
|
|
While looking at how these are handled in the parser and the executor, I
have noticed that there is no test coverage for most of these when
reverse-engineering an expression for a SQLValueFunction node in
ruleutils.c, including how these are reparsed when included in a FROM
clause. Some hacking in this area has showed me that these could break
easily, so add some coverage to track the existing compatibility.
Extracted from a much larger patch by me.
Discussion: https://postgr.es/m/YzaG3MoryCguUOym@paquier.xyz
|
|
The code was completing this pattern with a list of settable characters,
and it was possible to reach this state after completing a "ALTER
STATISTICS <name>" with SET.
Author: Vignesh C
Discussion: https://postgr.es/m/CALDaNm2HHF_371o+EeSjxDDS17Cx7d-ko2h1fLU94=ob=4_ktg@mail.gmail.com
|
|
The new tests have been reporting a warning hidden in the logs, as of
"Odd number of elements in hash assignment" (perlcritic or similar did
not report an issue, actually). This comes down to a typo in the test
"matching regexp for username" for a double-quoted regexp using commas,
where we passed an extra argument. The test is intended to pass, but
this was causing the test to fail. This also pointed out that the
newly-added role "md5,role" lacks an entry in the password file used to
provide the password, so add one.
While on it, make the tests pickier by checking the contents of the logs
generated on successful authentication.
Oversights in 8fea868.
|
|
As of this commit, any database or user entry beginning with a slash (/)
is considered as a regular expression. This is particularly useful for
users, as now there is no clean way to match pattern on multiple HBA
lines. For example, a user name mapping with a regular expression needs
first to match with a HBA line, and we would skip the follow-up HBA
entries if the ident regexp does *not* match with what has matched in
the HBA line.
pg_hba.conf is able to handle multiple databases and roles with a
comma-separated list of these, hence individual regular expressions that
include commas need to be double-quoted.
At authentication time, user and database names are now checked in the
following order:
- Arbitrary keywords (like "all", the ones beginning by '+' for
membership check), that we know will never have a regexp. A fancy case
is for physical WAL senders, we *have* to only match "replication" for
the database.
- Regular expression matching.
- Exact match.
The previous logic did the same, but without the regexp step.
We have discussed as well the possibility to support regexp pattern
matching for host names, but these happen to lead to tricky issues based
on what I understand, particularly with host entries that have CIDRs.
This commit relies heavily on the refactoring done in a903971 and
fc579e1, so as the amount of code required to compile and execute
regular expressions is now minimal. When parsing pg_hba.conf, all the
computed regexps needs to explicitely free()'d, same as pg_ident.conf.
Documentation and TAP tests are added to cover this feature, including
cases where the regexps use commas (for clarity in the docs, coverage
for the parsing logic in the tests).
Note that this introduces a breakage with older versions, where a
database or user name beginning with a slash are treated as something to
check for an equal match. Per discussion, we have discarded this as
being much of an issue in practice as it would require a cluster to
have database and/or role names that begin with a slash, as well as HBA
entries using these. Hence, the consistency gained with regexps in
pg_ident.conf is more appealing in the long term.
**This compatibility change should be mentioned in the release notes.**
Author: Bertrand Drouvot
Reviewed-by: Jacob Champion, Tom Lane, Michael Paquier
Discussion: https://postgr.es/m/fff0d7c1-8ad4-76a1-9db3-0ab6ec338bf7@amazon.com
|
|
It's unclear why a separate type would be needed here. We use plain
pid_t (or int) everywhere else.
(The only relevant platform where pid_t is not int is 64-bit MinGW,
where it is long long int. So defining pid_t as long (which is 32-bit
on Windows), as was done here, doesn't even accommodate that one.)
Reverts 66fa6eba5a61be740a6c07de92c42221fae79e9c.
Discussion: https://www.postgresql.org/message-id/289c2e45-c7d9-5ce4-7eff-a9e2a33e1580@enterprisedb.com
|
|
Because of a small thinko in 7844c9918a43b494adde3575891d217a37062378,
psql -c would exit successfully when a query is canceled. Fix this so
that it exits with a nonzero status, just like for all other errors.
|
|
Since pg_backup_start() and pg_backup_stop() exist, the tablespace map
data and the backup state data (backup_label string until 7d70809) have
been allocated in the TopMemoryContext. This approach would cause
memory leaks in the session calling these functions if failures happen
before pg_backup_stop() ends, leaking more memory on repeated failures.
Both things need little memory so that would not be really noticeable
for most users, except perhaps connection poolers with long-lived
connections able to trigger backup failures with these functions.
This commit improves the logic in this area by not allocating anymore
the backup-related data that needs to travel across the SQL-callable
backup functions in TopMemoryContext, by using instead a dedicated
memory context child of TopMemoryContext. The memory context is created
in pg_backup_start() and deleted when finishing pg_backup_stop(). In
the event of an in-flight failure, this memory context gets reset in the
follow-up pg_backup_start() call, so as we are sure that only one run
worth of data is leaked at any time. Some cleanup was already done for
the backup data on a follow-up call of pg_backup_start(), but using a
memory context makes the whole simpler.
BASE_BACKUP commands are executed in isolation, relying on the memory
context created for replication commands, hence these do not need such
an extra logic.
Author: Bharath Rupireddy
Reviewed-by: Robert Haas, Alvaro Herrera, Cary Huang, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACXqvfKF2B0beQ=aJMdWnpNohmBPsRg=EDQj_6y1t2O8mQ@mail.gmail.com
|
|
Specifically, when pg_basebackup is invoked with -Tx=y, don't error
out if x could plausibly be an absolute path either on Windows or on
non-Windows systems. We don't know whether the remote system is
running the same OS as the local system, so it's not appropriate to
assume that our local rule about absolute pathnames is the same as
the rule on the remote system.
Patch by me, reviewed by Tom Lane, Andrew Dunstan, and
Davinder Singh.
Discussion: http://postgr.es/m/CA+TgmoY+jC3YiskomvYKDPK3FbrmsDU7_8+wMHt02HOdJeRb0g@mail.gmail.com
|
|
Previously in commit 42681dffaf, we added CFI during decoding changes but
missed another similar case that can happen while restoring changes
spilled to disk back into memory in a loop.
Reported-by: Robert Haas
Author: Amit Kapila
Backpatch-through: 10
Discussion: https://postgr.es/m/CA+TgmoaLObg0QbstbC8ykDwOdD1bDkr4AbPpB=0DPgA2JW0mFg@mail.gmail.com
|
|
It happens that the parts of hba.conf that are planned to be extended
to support regular expressions would finish by using the same error
message as the one used currently for pg_ident.conf when a regular
expression cannot be compiled, as long as the routine centralizing the
logic, regcomp_auth_token(), knows from which file the regexp comes from
and its line location in the so-said file.
This change makes the follow-up patches slightly simpler, and the logic
remains the same. I suspect that this makes the proposal to add support
for file inclusions in pg_ident.conf and pg_hba.conf slightly simpler,
as well.
Extracted from a larger patch by the same author. This is similar to
the refactoring done in fc579e1.
Author: Bertrand Drouvot
Discussion: https://postgr.es/m/fff0d7c1-8ad4-76a1-9db3-0ab6ec338bf7@amazon.com
|
|
56788d215 adjusted the parallel seq scan code so that instead of handing
out a single block at a time to parallel workers, it now hands out ranges
of blocks.
Here we update the documentation which still claimed that workers received
just 1 block at a time.
Reported-by: Zhang Mingli
Discussion: https://postgr.es/m/17c99615-2c3b-4e4e-9d0b-424a66a7bccd@Spark
Backpatch-through: 14, where 56788d215 was added.
|
|
Various test suites use the "openssl" program as part of their setup.
There isn't a way to override which openssl program is to be used,
other than by fiddling with the path, perhaps. This has gotten
increasingly problematic because different versions of openssl have
different capabilities and do different things by default.
This patch checks for an openssl binary in configure and meson setup,
with appropriate ways to override it. This is similar to how "lz4"
and "zstd" are handled, for example. The meson build system actually
already did this, but the result was only used in some places. This
is now applied more uniformly.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/dc638b75-a16a-007d-9e1c-d16ed6cf0ad2%40enterprisedb.com
|
|
This makes the choice of result scale of numeric power() for integer
exponents consistent with the choice for non-integer exponents, and
with the result scale of other numeric functions. Specifically, the
result scale will be at least as large as the scale of either input,
and sufficient to ensure that the result has at least 16 significant
digits.
Formerly, the result scale was based only on the scale of the first
input, without taking into account the weight of the result. For
results with negative weight, that could lead to results with very few
or even no non-zero significant digits (e.g., 10.0 ^ (-18) produced
0.0000000000000000).
Fix this by moving responsibility for the choice of result scale into
power_var_int(), which already has code to estimate the result weight.
Per report by Adrian Klaver and suggested fix by Tom Lane.
No back-patch -- arguably this is a bug fix, but one which is easy to
work around, so it doesn't seem worth the risk of changing query
results in stable branches.
Discussion: https://postgr.es/m/12a40226-70ac-3a3b-3d3a-fdaf9e32d312%40aklaver.com
|
|
In commit f10a025cfe97 I mistakenly used list_member_oid in a place
where list_member_xid is called for. (Currently innocuous as both
typedefs are pretty much identical, but if we change either, it'll
become broken.) Repair.
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/OS0PR01MB5716E2399494D4CB1A28A091942A9@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
|
When the logical decoding restarts from NEW_CID, since there is no
association between the top transaction and its subtransaction, both are
created as top transactions and have the same LSN. This caused the
assertion failure in AssertTXNLsnOrder().
This patch skips the assertion check until we reach the LSN at which we
start decoding the contents of the transaction, specifically
start_decoding_at LSN in SnapBuild. This is okay because we don't
guarantee to make the association between top transaction and
subtransaction until we try to decode the actual contents of transaction.
The ordering of the records prior to the start_decoding_at LSN should have
been checked before the restart.
The other assertion failure is due to the reason that we forgot to track
that we have considered top-level transaction id in the list of catalog
changing transactions that were committed when one of its subtransactions
is marked as containing catalog change.
Reported-by: Tomas Vondra, Osumi Takamichi
Author: Masahiko Sawada, Kuroda Hayato
Reviewed-by: Amit Kapila, Dilip Kumar, Kuroda Hayato, Kyotaro Horiguchi, Masahiko Sawada
Backpatch-through: 10
Discussion: https://postgr.es/m/a89b46b6-0239-2fd5-71a9-b19b1f7a7145%40enterprisedb.com
Discussion: https://postgr.es/m/TYCPR01MB83733C6CEAE47D0280814D5AED7A9%40TYCPR01MB8373.jpnprd01.prod.outlook.com
|
|
Set up a signal handler for INT/TERM so that we run our END block if we
get them. In END, if the exit status indicates a problem, call
_update_pid(-1) to improve chances of the stop working in case start()
hasn't returned yet.
Also, change END's teardown_node() so that it passes fail_ok=>1, so that
if a node fails to stop, we still stop the other nodes in the same test.
Per complaint from Andres Freund.
This doesn't seem important enough to backpatch, at least for now.
Discussion: https://postgr.es/m/20220930040734.mbted42oiynhn2t6@awork3.anarazel.de
|
|
After commit 39969e2a1e4d, ->forcePageWrites is no longer very
interesting: we can just test whether runningBackups is different from 0.
This simplifies some code, so do away with it.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/39969e2a1e4d7f5a37f3ef37d53bbfe171e7d77a
|
|
Per https://llvm.org/docs/OpaquePointers.html, support for non-opaque
pointers still exists and we can request that on our context. We have
until LLVM 16 to move to opaque pointers, a much larger change.
Back-patch to 11, where LLVM support arrived.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAMHz58Sf_xncdyqsekoVsNeKcruKootLtVH6cYXVhhUR1oKPCg%40mail.gmail.com
|
|
We had two copies of almost identical logic to revert shared memory
state when a running backup aborts; we can remove
pg_backup_start_callback if we adapt do_pg_abort_backup so that it can
be used for this purpose too.
However, in order for this to work, we have to repurpose the flag passed
to do_pg_abort_backup. It used to indicate whether to throw a warning
(and the only caller always passed true). It now indicates whether the
callback is being called at start time (in which case the session backup
state is known not to have been set to RUNNING yet, so action is always
taken) or shmem time (in which case action is only taken if the session
backup state is RUNNING). Thus the meaning of the flag is no longer
superfluous, but it's actually quite critical to get right. I (Álvaro)
chose to change the polarity and the code flow re. the flag from what
Bharath submitted, for coding clarity.
Co-authored-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/20221013111330.564fk5tkwe3ha77l%40alvherre.pgsql
|
|
As currently designed, with a callback registered in a ERROR_CLEANUP
block, the shutdown callback would get called twice when updating
archive_library on SIGHUP, which is something that we want to avoid to
ease the life of extension writers.
Anyway, an ERROR in the archiver process is treated as a FATAL, stopping
it immediately, hence there is no need for a ERROR_CLEANUP block.
Instead of that, the shutdown callback is not called upon
before_shmem_exit(), giving to the modules the opportunity to do any
cleanup actions before the server shuts down its subsystems.
While on it, this commit adds some testing coverage for the shutdown
callback. Neither shell_archive nor basic_archive have been using it,
and one is added to shell_archive, whose trigger is checked in a TAP
test through a shutdown sequence.
Author: Nathan Bossart, Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi, Michael Paquier
Discussion: https://postgr.es/m/20221015221328.GB1821022@nathanxps13
Backpatch-through: 15
|
|
make_ctags did not include field members of structs since the commit
964d01ae90c314eb31132c2e7712d5d9fc237331.
For example, in the following field of RestrictInfo:
Selectivity norm_selec pg_node_attr(equal_ignore);
pg_node_attr was mistakenly interpreted to be the name of the field.
To fix this, add -I option to ctags command if the command is
Exuberant ctags or Universal ctags (for plain old ctags, struct
members are not included in the tags file anyway).
Also add "-e" and "-n" options to make_ctags. The -e option invokes
ctags command with -e option, which produces TAGS file for emacs. This
allows to eliminate duplicate codes in make_etags so that make_etags
just exec make_ctags with -e option.
The -n option allows not to produce symbolic links in each
sub directory (the default is producing symbolic links).
Author: Yugo Nagata
Reviewers: Alvaro Herrera, Tatsuo Ishii
Discussion: https://postgr.es/m/flat/20221007154442.76233afc7c5b255c4de6528a%40sraoss.co.jp
|
|
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pvbma5HCc7==-B1ycyLQVyu7Fqq-qV=jhC5Zx4pWqk3uw@mail.gmail.com
|
|
AuthToken gains a regular expression, and IdentLine is changed so as it
uses an AuthToken rather than tracking separately the ident user string
used for the regex compilation and its generated regex_t. In the case
of pg_ident.conf, a set of AuthTokens is built in the pre-parsing phase
of the file, and an extra regular expression is compiled when building
the list of IdentLines, after checking the sanity of the fields in a
pre-parsed entry.
The logic in charge of computing and executing regular expressions is
now done in a new set of routines called respectively
regcomp_auth_token() and regexec_auth_token() that are wrappers around
pg_regcomp() and pg_regexec(), working on AuthTokens. While on it, this
patch adds a routine able to free an AuthToken, free_auth_token(), to
simplify a bit the logic around the requirement of using a specific free
routine for computed regular expressions. Note that there are no
functional or behavior changes introduced by this commit.
The goal of this patch is to ease the use of regular expressions with
more items of pg_hba.conf (user list, database list, potentially
hostnames) where AuthTokens are used extensively. This will be tackled
later in a separate patch.
Author: Bertrand Drouvot, Michael Paquier
Discussion: https://postgr.es/m/fff0d7c1-8ad4-76a1-9db3-0ab6ec338bf7@amazon.com
|
|
Preprocessing of the HAVING clause will reduce havingQual to NIL
if the clause is constant-TRUE. This is one case where that
convention is rather unfortunate, because "HAVING TRUE" is not at all
the same as not having any HAVING clause at all. (Per the SQL spec,
it still forces the query to be grouped.) The planner deals with this
by having a boolean hasHavingQual that records whether havingQual was
originally nonempty; places that just want to check whether HAVING
was specified are supposed to consult that.
I found three places that got that wrong. Fortunately, these could
only affect cost estimates not correctness. It'd be hard even
to demonstrate the errors; for example, the one in allpaths.c would
only matter in a query that has HAVING TRUE but no GROUP BY and no
aggregates, which would require a completely variable-free SELECT
list, making the case probably of only academic interest. Hence,
while these are worth fixing before someone copies the incorrect
coding somewhere more critical, they don't seem worth back-patching.
I didn't bother trying to devise regression tests, either.
Discussion: https://postgr.es/m/2503888.1666042643@sss.pgh.pa.us
|
|
Our Perl version requirement was raised to 5.14 by commit 4c1532763a00
Discussion: https://postgr.es/m/20221017081649.fjcd2kjqif77uyf2@alvherre.pgsql
|
|
The original hint says to use SET PUBLICATION when really ADD/DROP
PUBLICATION is called for, so this is arguably a bug fix.
Also, a very similar message elsewhere was using an inconsistent
SQLSTATE.
While at it, unwrap some strings.
Backpatch to 15.
Author: Hou zj <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/OS0PR01MB57160AD0E7386547BA978EB394299@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
|
These routines have been renamed in a19e5ce. There is no need to keep
the compatibility declarations on HEAD, as once an extension moves to
the new routine name when compiling with v16~ the code would work the
same way when recompiled on v15. No backpatch to v15 for this one,
because ABI compatibility has to be maintained there.
Discussion: https://postgr.es/m/20221013194820.ciktb2sbbpw7cljm@awork3.anarazel.de
|
|
Per discussion, the existing routine name able to initialize a SRF
function with materialize mode is unpopular, so rename it. Equally, the
flags of this function are renamed, as of:
- SRF_SINGLE_USE_EXPECTED -> MAT_SRF_USE_EXPECTED_DESC
- SRF_SINGLE_BLESS -> MAT_SRF_BLESS
The previous function and flags introduced in 9e98583 are kept around
for compatibility purposes, so as any extension code already compiled
with v15 continues to work as-is. The declarations introduced here for
compatibility will be removed from HEAD in a follow-up commit.
The new names have been suggested by Andres Freund and Melanie
Plageman.
Discussion: https://postgr.es/m/20221013194820.ciktb2sbbpw7cljm@awork3.anarazel.de
Backpatch-through: 15
|
|
It was previously easily overlooked at the end of several tables.
Reported-by: Alex Denman
Discussion: https://postgr.es/m/166335888474.659.16897487975376230364@wrigleys.postgresql.org
Backpatch-through: 10
|
|
The fix is to run ANALYZE.
Discussion: https://postgr.es/m/YzRr+ys98UzVQJvK@momjian.us,
https://postgr.es/m/flat/CAKJS1f8DTbCHf9gedU0He6ARsd58E6qOhEHM1caomqj_r9MOiQ%40mail.gmail.com,
https://postgr.es/m/CAKJS1f80o98hcfSk8j%3DfdN09S7Sjz%2BvuzhEwbyQqvHJb_sZw0g%40mail.gmail.com
Backpatch-through: 10
|
|
When creating a cast that uses a conversion function, we've
historically allowed the input and result types to be
binary-compatible with the function's input and result types,
rather than necessarily being identical. This means that the new
cast is logically dependent on the binary-compatible cast or casts
that it references: if those are defined by pg_cast entries, and you
try to restore the new cast without having defined them, it'll fail.
Hence, we should make pg_depend entries to record these dependencies
so that pg_dump knows that there is an ordering requirement.
This is not the only place where we allow such shortcuts; aggregate
functions for example are similarly lax, and in principle should gain
similar dependencies. However, for now it seems sufficient to fix
the cast-versus-cast case, as pg_dump's other ordering heuristics
should keep it out of trouble for other object types.
Per report from David Turoň; thanks also to Robert Haas for
preliminary investigation. I considered back-patching, but
seeing that this issue has existed for many years without
previous reports, it's not clear it's worth the trouble.
Moreover, back-patching wouldn't be enough to ensure that the
new pg_depend entries exist in existing databases anyway.
Discussion: https://postgr.es/m/OF0A160F3E.578B15D1-ONC12588DA.003E4857-C12588DA.0045A428@notes.linuxbox.cz
|
|
DefineQueryRewrite() has long required that ON SELECT rules be named
"_RETURN". But we overlooked the converse case: we should forbid
non-ON-SELECT rules that are named "_RETURN". In particular this
prevents using CREATE OR REPLACE RULE to overwrite a view's _RETURN
rule with some other kind of rule, thereby breaking the view.
Per bug #17646 from Kui Liu. Back-patch to all supported branches.
Discussion: https://postgr.es/m/17646-70c93cfa40365776@postgresql.org
|
|
The executor will dump core if it's asked to execute a seqscan on
a relation having no table AM, such as a view. While that shouldn't
really happen, it's possible to get there via catalog corruption,
such as a missing ON SELECT rule. It seems worth installing a defense
against that. There are multiple plausible places for such a defense,
but I picked the planner's get_relation_info().
Per discussion of bug #17646 from Kui Liu. Back-patch to v12 where
the tableam APIs were introduced; in older versions you won't get a
SIGSEGV, so it seems less pressing.
Discussion: https://postgr.es/m/17646-70c93cfa40365776@postgresql.org
|
