| Age | Commit message (Collapse) | Author |
|---|
|
Previously, we'd fill all fields except ccbin, and only later obtain and
detoast ccbin, with hypothetical failures being possible. If ccbin is
null (rare catalog corruption I have never witnessed) or its a corrupted
toast entry, we leak a tiny bit of memory in CacheMemoryContext from
having strdup'd the constraint name. Repair these by only attempting to
fill the struct once ccbin has been detoasted.
Author: Ranier Vilela <ranier.vf@gmail.com>
Discussion: https://postgr.es/m/CAEudQAr=i3_Z4GvmediX900+sSySTeMkvuytYShhQqEwoGyvhA@mail.gmail.com
|
|
Instead of having five separate GUC structs, one for each type, with
the generic part contained in each of them, flip it around and have
one common struct, with the type-specific part has a subfield.
The very original GUC design had type-specific structs and
type-specific lists, and the membership in one of the lists defined
the type. But now the structs themselves know the type (from the
.vartype field), and they are all loaded into a common hash table at
run time, and so this original separation no longer makes sense. It
creates a bunch of inconsistencies in the code about whether the
type-specific or the generic struct is the primary struct, and a lot
of casting in between, which makes certain assumptions about the
struct layouts.
After the change, all these casts are gone and all the data is
accessed via normal field references. Also, various code is
simplified because only one kind of struct needs to be processed.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://www.postgresql.org/message-id/flat/8fdfb91e-60fb-44fa-8df6-f5dea47353c9@eisentraut.org
|
|
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/6dd9d208-a3ed-49b5-b03d-8617261da973%40eisentraut.org
|
|
for easier readability
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/6dd9d208-a3ed-49b5-b03d-8617261da973%40eisentraut.org
|
|
Co-authored-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/6dd9d208-a3ed-49b5-b03d-8617261da973%40eisentraut.org
|
|
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/6dd9d208-a3ed-49b5-b03d-8617261da973%40eisentraut.org
|
|
MSVC in C11 mode supports the standard restrict qualifier, so we don't
need the workaround naming pg_restrict anymore.
Even though restrict is in C99 and should be supported by all
supported compilers, we keep the configure test and the hardcoded
redirection to __restrict, because that will also work in C++ in all
supported compilers. (restrict is not part of the C++ standard.)
For backward compatibility for extensions, we keep a #define of
pg_restrict around, but our own code doesn't use it anymore.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/0e3d8644-c01d-4374-86ea-9f0a987981f0%40eisentraut.org
|
|
The comment "type prefixes (const, signed, volatile, inline) are
handled in pg_config.h." has been mostly not true for a long time.
|
|
XLogRecordAssemble() may be called multiple times before inserting a
record in XLogInsertRecord(), and the amount of FPIs generated inside
a record whose insertion is attempted multiple times may vary.
The logic added in f9a09aa29520 touched directly pgWalUsage in
XLogRecordAssemble(), meaning that it could be possible for pgWalUsage
to be incremented multiple times for a single record. This commit
changes the code to use the same logic as the number of FPIs added to a
record, where XLogRecordAssemble() returns this information and feeds it
to XLogInsertRecord(), updating pgWalUsage only when a record is
inserted.
Reported-by: Shinya Kato <shinya11.kato@gmail.com>
Discussion: https://postgr.es/m/CAOzEurSiSr+rusd0GzVy8Bt30QwLTK=ugVMnF6=5WhsSrukvvw@mail.gmail.com
|
|
The new %S substitution shows the current value of search_path.
Note that this only works when connected to Postgres v18 or newer,
since search_path was first marked as GUC_REPORT in commit
28a1121fd9. On older versions that don't report search_path, %S is
replaced with a question mark.
Suggested-by: Lauri Siltanen <lauri.siltanen@gmail.com>
Author: Florents Tselai <florents.tselai@gmail.com>
Reviewed-by: Jelte Fennema-Nio <postgres@jeltef.nl>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CANsM767JhTKCRagTaq5Lz52fVwLPVkhSpyD1C%2BOrridGv0SO0A%40mail.gmail.com
|
|
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/6dd9d208-a3ed-49b5-b03d-8617261da973%40eisentraut.org
|
|
This saves some vertical space and makes the comments style more
consistent with the rest of the code.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/6dd9d208-a3ed-49b5-b03d-8617261da973%40eisentraut.org
|
|
I have never seen this be a problem in practice, but it came up when
purposely corrupting catalog contents to study the fix for a nearby bug:
we'd try to decrement relchecks, but since it's zero we error out and
fail to drop the constraint. The fix is to downgrade the error to
warning, skip decrementing the counter, and otherwise proceed normally.
Given lack of field complaints, no backpatch.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Discussion: https://postgr.es/m/202508291058.q2zscdcs64fj@alvherre.pgsql
|
|
Suggested-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGLXQUYK7Cq5KbLGgTWo7pORs7yhBWO1AEnZt7xTYbLRhg@mail.gmail.com
|
|
Some recent changes were made to remove the explicit dependency on
btree indexes in some parts of the code. One of these changes was
made in commit 9ef1851685b, which allows non-btree indexes to be used
in get_actual_variable_range(). A follow-up commit ee1ae8b99f9 fixes
the cases where an index doesn’t have a sortopfamily as this is a
prerequisite to be used in get_actual_variable_range().
However, it was found that indexes that have amcanorder = true but do
not allow index-only-scans (amcanreturn returns false or is NULL) will
pass all of the conditions, while they should be rejected since
get_actual_variable_range() uses the index-only-scan machinery in
get_actual_variable_endpoint(). Such an index might cause errors like
ERROR: no data returned for index-only scan
during query planning.
The fix is to add a check in get_actual_variable_range() to reject
indexes that do not allow index-only scans.
Author: Maxime Schoemans <maxime.schoemans@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/20ED852A-C2D9-41EB-8671-8C8B9D418BE9%40enterprisedb.com
|
|
This new counter, called "wal_fpi_bytes", tracks the total amount in
bytes of full page images (FPIs) generated in WAL. This data becomes
available globally via pg_stat_wal, and for backend statistics via
pg_stat_get_backend_wal().
Previously, this information could only be retrieved with pg_waldump or
pg_walinspect, which may not be available depending on the environment,
and are expensive to execute. It offers hints about how much FPIs
impact the WAL generated, which could be a large percentage for some
workloads, as well as the effects of wal_compression or page holes.
Bump catalog version.
Bump PGSTAT_FILE_FORMAT_ID, due to the addition of wal_fpi_bytes in
PgStat_WalCounters.
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAOzEurQtZEAfg6P0kU3Wa-f9BWQOi0RzJEMPN56wNTOmJLmfaQ@mail.gmail.com
|
|
Extend logicalrep_worker_stop, logicalrep_worker_wakeup, and
logicalrep_worker_find to accept a worker type argument. This change
enables differentiation between logical replication worker types, such as
apply workers and table sync workers. While preserving existing behavior,
it lays the groundwork for upcoming patch to add sequence synchronization
workers.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
|
|
Two tests are changed in this commit:
- libpq's 006_service
- ldap's 003_ldap_connection_param_lookup
CRLF translation is already handled by the text mode, so there should be
need for any specific logic. See also 1c6d4629394d, msys perl being one
case where the translation mattered.
Note: This is first applied on HEAD, and backpatch will follow once the
buildfarm has provided an opinion about this commit.
Author: Jacob Champion <jacob.champion@enterprisedb.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/aPsh39bxwYKvUlAf@paquier.xyz
Backpatch-through: 13
|
|
These were discovered while reviewing Aleksander Alekseev's
proposed changes to pgindent.
Oversights in commits 393e0d2314 and 25a30bbd42.
Discussion: https://postgr.es/m/aP-H6kSsGOxaB21k%40nathan
|
|
The existing RLS tests focus on the outcomes of various testing
scenarios, rather than the exact policies applied. This sometimes
makes it hard to see why a particular result occurred (e.g., which
policy failed), or to construct a test that fails a particular policy
check without an earlier check failing. These new tests issue NOTICE
messages to show the actual policies applied for each command type,
including the different paths through INSERT ... ON CONFLICT and
MERGE, making it easier to verify the expected behaviour.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Viktor Holmberg <v@viktorh.net>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/CAEZATCWqnfeChjK=n1V_dYZT4rt4mnq+ybf9c0qXDYTVMsy8pg@mail.gmail.com
|
|
Add some const qualifications afforded by the previous change that
added a const qualification to PageAddItemExtended().
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://www.postgresql.org/message-id/flat/c75cccf5-5709-407b-a36a-2ae6570be766@eisentraut.org
|
|
This type is just char * underneath, it provides no real value, no
type safety, and just makes the code one level more mysterious. It is
more idiomatic to refer to blobs of memory by a combination of void *
and size_t, so change it to that.
Also, since this type hides the pointerness, we can't apply qualifiers
to what is pointed to, which requires some unconstify nonsense. This
change allows fixing that.
Extension code that uses the Item type can change its code to use
void * to be backward compatible.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://www.postgresql.org/message-id/flat/c75cccf5-5709-407b-a36a-2ae6570be766@eisentraut.org
|
|
The use of the restrict qualifier in casts is meaningless, so remove
them.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/0e3d8644-c01d-4374-86ea-9f0a987981f0%40eisentraut.org
|
|
Previously, the check_hook for synchronized_standby_slots attempted to
validate that each specified slot existed and was physical. However, these
checks were not performed during server startup. As a result, if users
configured non-existent slots before startup, the misconfiguration would
go undetected initially. This could later cause parallel query failures,
as newly launched workers would detect the issue and raise an ERROR.
This patch improves the check_hook by validating the syntax and format of
slot names. Validation of slot existence and type is deferred to the WAL
sender process, aligning with the behavior of the check_hook for
primary_slot_name.
Reported-by: Fabrice Chapuis <fabrice636861@gmail.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Ashutosh Sharma <ashu.coek88@gmail.com>
Reviewed-by: Rahila Syed <rahilasyed90@gmail.com>
Backpatch-through: 17, where it was introduced
Discussion: https://postgr.es/m/CAA5-nLCeO4MQzWipCXH58qf0arruiw0OeUc1+Q=Z=4GM+=v1NQ@mail.gmail.com
|
|
Ensure that the target table on the subscriber exists before executing any
DML intended for replication.
Currently, if the table is missing, the replication logic keeps retrying
until the table is eventually created by the test. Although this behaviour
does not cause test failures, since the table is created after the INSERT
is published and replication eventually succeeds, however, it introduces
unnecessary looping and delays.
Author: Grem Snoort <grem.snoort@gmail.com>
Discussion: https://postgr.es/m/CANV9Qw5HD7=Fp4nox2O7DoVctHoabRRVW9Soo4A=QipqW5B=Tg@mail.gmail.com
|
|
Reported-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CA+hUKGJ5Xh0KxLYXDZuPvw1_fHX=yuzb4xxtam1Cr6TPZZ1o+w@mail.gmail.com
|
|
When dealing with ResultRelInfos for partitions, there are cases where
there are mixed requirements for the ri_RootResultRelInfo. There are
cases when the partition itself requires a NULL ri_RootResultRelInfo and
in the same query, the same partition may require a ResultRelInfo with
its parent set in ri_RootResultRelInfo. This could cause the column
mapping between the partitioned table and the partition not to be done
which could result in crashes if the column attnums didn't match
exactly.
The fix is simple. We now check that the ri_RootResultRelInfo matches
what the caller passed to ExecGetTriggerResultRel() and only return a
cached ResultRelInfo when the ri_RootResultRelInfo matches what the
caller wants, otherwise we'll make a new one.
Author: David Rowley <dgrowleyml@gmail.com>
Author: Amit Langote <amitlangote09@gmail.com>
Reported-by: Dmitry Fomin <fomin.list@gmail.com>
Discussion: https://postgr.es/m/7DCE78D7-0520-4207-822B-92F60AEA14B4@gmail.com
Backpatch-through: 15
|
|
When testing 128/32-bit division in the test_int128 test module, make
sure that we don't attempt to divide by zero.
While at it, use pg_prng_int64() and pg_prng_int32() to generate the
random numbers required for the tests, rather than pg_prng_uint64().
This eliminates the need for any implicit or explicit type casts.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reported-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/da4wqngd6gwz5s4yf5y5f75xj7gpja62l4dbp6w4j3vs7fcjue@upvolcu4e6o2
|
|
This commit makes the way WAL segments are handled from the source to
the target server slightly smarter: the copy of the WAL segments is now
skipped if these have been created before the point where source and
target have diverged (the WAL segment where the point of divergence
exists is still copied), because we know that such segments exist on
both the target and source. Note that the on-disk size of the WAL
segments on the source and target need to match. Hence, only the
segments generated after the point of divergence are now copied. A
segment existing on the source but not the target is copied.
Previously, all the WAL segments were just copied in full. This change
can make the rewind operation cheaper in some configurations, especially
for setups where some WAL retention causes many segments to remain on
the source server even after the promotion of a standby used as source
to rewind a previous primary.
A TAP test is added to track these new behaviors. The file map printed
with --debug now includes all the information related to WAL segments,
to be able to track if these are copied or skipped, and the test relies
on the debug output generated.
Author: John Hsu <johnhyvr@gmail.com>
Author: Justin Kwan <justinpkwan@outlook.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Srinath Reddy Sadipiralla <srinath2133@gmail.com>
Discussion: https://postgr.es/m/181b4c6fa9c.b8b725681941212.7547232617810891479@viggy28.dev
|
|
This commit enhances psql's tab completion support for large objects:
- Completes \lo_export <oid> with a file name
- Completes GRANT/REVOKE ... LARGE with OBJECT
- Completes ALTER DEFAULT PRIVILEGES GRANT/REVOKE ... LARGE with OBJECTS
Author: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Co-authored-by: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Discussion: https://postgr.es/m/87y0syikki.fsf@wibble.ilmari.org
|
|
Commit 65281391a caused some additional error context lines to
appear in the output of one test case. That's fine, but we missed
updating the expected output. Do it now.
While here, add some missing test-output subdirectories to
contrib/sepgsql/.gitignore, so that we don't get git warnings
after running the tests.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1613232.1761255361@sss.pgh.pa.us
Backpatch-through: 18
|
|
The project Git server hasn't supported cloning with the Git protocol
in a very long time, but the documentation never got the memo. Remove
the mention of using the Git protocol, and while there wrap a mention
of Git in <productname> tags.
Backpatch down to all supported versions.
Author: Daniel Gustafsson <daniel@yesql.se>
Reported-by: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Jacob Champion <jacob.champion@enterprisedb.com>
Reviewed-by: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CABwTF4WMiMb-KT2NRcib5W0C8TQF6URMb+HK9a_=rnZnY8Q42w@mail.gmail.com
Backpatch-through: 13
|
|
If we're trying to perform check_function_bodies validation
of a PL/Python trigger function, we create a new PLyProcedure,
but we don't put it into the PLy_procedure_cache hash table.
(Doing so would be useless, since we don't have the relation
OID that is part of the cache key for a trigger function, so
we could not make an entry that would be found by later uses.)
However, we didn't think through what to do instead, with the
result that the PLyProcedure was simply leaked.
It would take a pretty large number of CREATE FUNCTION operations
for this to amount to a serious problem, but it's easy to see the
memory bloat if you do CREATE OR REPLACE FUNCTION in a loop.
To fix, have PLy_procedure_get delete the new PLyProcedure
and return NULL if it's not going to cache the PLyProcedure.
I considered making plpython3_validator do the cleanup instead,
which would be more natural. But then plpython3_validator would
have to know the rules under which PLy_procedure_get returns a
non-cached PLyProcedure, else it risks deleting something that's
pointed to by a cache entry. On the whole it seems more robust
to deal with the case inside PLy_procedure_get.
Found by the new version of Coverity (nice catch!). In the end
I feel this fix is more about satisfying Coverity than about
fixing a real-world problem, so I'm not going to back-patch.
|
|
These two functions expect there to be room to insert another item
in the FreePageBtree's array, but their assertions were too weak
to guarantee that. This has little practical effect granting that
the callers are not buggy, but it seems to be misleading late-model
Coverity into complaining about possible array overrun.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/799984.1761150474@sss.pgh.pa.us
Backpatch-through: 13
|
|
Commit c6f7f11d8 intended to prevent leaking any PyObject reference
counts in edge cases (such as out-of-memory during string
construction), but actually it introduced a leak in the normal case.
Repeating an error-trapping operation often enough would lead to
session-lifespan memory bloat. The problem is that I failed to
think about the fact that PyObject_GetAttrString() increments the
refcount of the returned PyObject, so that simply walking down the
list of error frame objects causes all but the first one to have
their refcount incremented.
I experimented with several more-or-less-complex ways around that,
and eventually concluded that the right fix is simply to drop the
newly-obtained refcount as soon as we walk to the next frame
object in PLy_traceback. This sounds unsafe, but it's perfectly
okay because the caller holds a refcount on the first frame object
and each frame object holds a refcount on the next one; so the
current frame object can't disappear underneath us.
By the same token, we can simplify the caller's cleanup back to
simply dropping its refcount on the first object. Cleanup of
each frame object will lead in turn to the refcount of the next
one going to zero.
I also added a couple of comments explaining why PLy_elog_impl()
doesn't try to free the strings acquired from PLy_get_spi_error_data()
or PLy_get_error_data(). That's because I got here by looking at a
Coverity complaint about how those strings might get leaked. They
are not leaked, but in testing that I discovered this other leak.
Back-patch, as c6f7f11d8 was. It's a bit nervous-making to be
putting such a fix into v13, which is only a couple weeks from its
final release; but I can't see that leaving a recently-introduced
leak in place is a better idea.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1203918.1761184159@sss.pgh.pa.us
Backpatch-through: 13
|
|
This patch adds support for a new SQL command:
ALTER SUBSCRIPTION ... REFRESH SEQUENCES
This command updates the sequence entries present in the
pg_subscription_rel catalog table with the INIT state to trigger
resynchronization.
In addition to the new command, the following subscription commands have
been enhanced to automatically refresh sequence mappings:
ALTER SUBSCRIPTION ... REFRESH PUBLICATION
ALTER SUBSCRIPTION ... ADD PUBLICATION
ALTER SUBSCRIPTION ... DROP PUBLICATION
ALTER SUBSCRIPTION ... SET PUBLICATION
These commands will perform the following actions:
Add newly published sequences that are not yet part of the subscription.
Remove sequences that are no longer included in the publication.
This ensures that sequence replication remains aligned with the current
state of the publication on the publisher side.
Note that the actual synchronization of sequence data/values will be
handled in a subsequent patch that introduces a dedicated sequence sync
worker.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Nisha Moond <nisha.moond412@gmail.com>
Reviewed-by: Shlok Kyal <shlok.kyal.oss@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
|
|
isRelDataFile() is renamed to getFileContentType(), extended so as it
becomes able to detect more file patterns than only relation files. The
new file name pattern that can be detected is WAL files.
This refactoring has been suggested by Robert Haas. This will be used
in a follow-up patch where we are looking at improving how WAL files are
processed by pg_rewind. As of this change, WAL files are still handled
the same way as previously, always copied from the source to the target
server.
Extracted from a larger patch by the same authors.
Author: John Hsu <johnhyvr@gmail.com>
Author: Justin Kwan <justinpkwan@outlook.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Reviewed-by: Srinath Reddy Sadipiralla <srinath2133@gmail.com>
Discussion: https://postgr.es/m/181b4c6fa9c.b8b725681941212.7547232617810891479@viggy28.dev
|
|
Commit 883a95646a8 introduced overflow entries in the replication lag tracker
to fix an issue where lag columns in pg_stat_replication could stall when
the replay LSN stopped advancing.
This commit adds comments clarifying the purpose and behavior of overflow
entries to improve code readability and understanding.
Since commit 883a95646a8 was recently applied and backpatched to all
supported branches, this follow-up commit is also backpatched accordingly.
Author: Xuneng Zhou <xunengzhou@gmail.com>
Reviewed-by: Fujii Masao <masao.fujii@gmail.com>
Discussion: https://postgr.es/m/CABPTF7VxqQA_DePxyZ7Y8V+ErYyXkmwJ1P6NC+YC+cvxMipWKw@mail.gmail.com
Backpatch-through: 13
|
|
The "else" code block having single statement with comments on a
separate line should have been surrounded by braces.
Reported-by: Chao Li <lic@highgo.com>
Suggested-by: David Rowley <dgrowleyml@gmail.com>
Author: Tatsuo Ishii <ishii@postgresql.org>
Discussion: https://postgr.es/m/20251020.125847.997839131426057290.ishii%40postgresql.org
|
|
These are listing which other tests one of the tests in the subsequent
group depends on. A couple of comments were located with unrelated
tests.
In passing, fix a small grammatical issue.
Noticed in passing while working on something else.
Author: David Rowley <dgrowleyml@gmail.com>
|
|
Fix oversight in commit 303ba0573, which was backpatched through 14.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CAD21AoBeFdTJcwUfUYPcEgONab3TS6i1PB9S5cSXcBAmdAdQKw%40mail.gmail.com
Backpatch-through: 14
|
|
When JIT deformed tuples (controlled via the jit_tuple_deforming GUC),
types narrower than sizeof(Datum) would be zero-extended up to Datum
width. This wasn't the same as what fetch_att() does in the standard
tuple deforming code. Logically the values are the same when fetching
via the DatumGet*() marcos, but negative numbers are not the same in
binary form.
In the report, the problem was manifesting itself with:
ERROR: could not find memoization table entry
in a query which had a "Cache Mode: binary" Memoize node. However, it's
currently unclear what else is affected. Anything that uses
datum_image_eq() or datum_image_hash() on a Datum from a tuple deformed by
JIT could be affected, but it may not be limited to that.
The fix for this is simple: use signed extension instead of zero
extension.
Many thanks to Emmanuel Touzery for reporting this issue and providing
steps and backup which allowed the problem to easily be recreated.
Reported-by: Emmanuel Touzery <emmanuel.touzery@plandela.si>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/DB8P194MB08532256D5BAF894F241C06393F3A@DB8P194MB0853.EURP194.PROD.OUTLOOK.COM
Backpatch-through: 13
|
|
We had several places that used cast-to-unsigned-int as a substitute
for properly checking for overflow. Coverity has started objecting
to that practice as likely introducing Y2038 bugs. An extra
comparison is surely not much compared to the cost of time(NULL), nor
is this coding practice particularly readable. Let's do it honestly,
with explicit logic covering the cases of first-time-through and
clock-went-backwards.
I don't feel a need to back-patch though: our released versions
will be out of support long before 2038, and besides which I think
the code would accidentally work anyway for another 70 years or so.
|
|
Oversight in commit 34694ec888. Since there aren't any known live
bugs related to this, no back-patch.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/aPk4u955ZPPZ_nYw%40nathan
|
|
The result of PLyUnicode_AsString is already palloc'd,
so pstrdup'ing it is just a waste of time and memory.
More importantly it might confuse people about whether
that's necessary. Doesn't seem important enough to
back-patch, but we should fix it. Spotted by Coverity.
|
|
Coverity complained that the list of table names returned by
retrieve_objects() was leaked, and it's right. Potentially this
is quite a lot of memory; however, it's not entirely clear how much
we gain by cleaning it up, since in many operating modes we're going
to need the list until the program is about to exit. Still, it will
win in some cases, so fix the leak.
vacuuming.c is new in v19, and this patch doesn't apply at all cleanly
to the predecessor code in v18. I'm not excited enough about the
issue to devise a back-patch.
|
|
One code path forgot to free the separately-malloc'd filename
part of a struct rfile. Another place freed the filename but
forgot the struct rfile itself. These seem worth fixing because
with a large backup we could be dealing with many files.
Coverity found the bug in make_rfile(). I found the other one
by manual inspection.
|
|
This small function is only used in one place, and it fails to
handle quoted table names (although the table name portion of the
input should never be quoted in current usage). In addition to
removing make_temptable_name_n() in favor of open-coding it where
needed, this commit ensures the "diff" table name is properly
quoted in order to future-proof this area a bit.
Author: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Shinya Kato <shinya11.kato@gmail.com>
Discussion: https://postgr.es/m/CAJ7c6TO3a5q2NKRsjdJ6sLf8isVe4aMaaX1-Hj2TdHdhFw8zRA%40mail.gmail.com
|
|
Previously, if primary_slot_name was set to an invalid slot name and
the configuration file was reloaded, both the postmaster and all other
backend processes reported a WARNING. With many processes running,
this could produce a flood of duplicate messages. The problem was that
the GUC check hook for primary_slot_name reported errors at WARNING
level via ereport().
This commit changes the check hook to use GUC_check_errdetail() and
GUC_check_errhint() for error reporting. As with other GUC parameters,
this causes non-postmaster processes to log the message at DEBUG3,
so by default, only the postmaster's message appears in the log file.
Backpatch to all supported versions.
Author: Fujii Masao <masao.fujii@gmail.com>
Reviewed-by: Chao Li <lic@highgo.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/CAHGQGwFud-cvthCTfusBfKHBS6Jj6kdAPTdLWKvP2qjUX6L_wA@mail.gmail.com
Backpatch-through: 13
|
|
Previously it was mistakenly assumed that there's only one window
function argument which needs to be processed by WinGetFuncArgInFrame
or WinGetFuncArgInPartition when IGNORE NULLS option is specified. To
eliminate the limitation, WindowObject->notnull_info is modified from
"uint8 *" to "uint8 **" so that WindowObject->notnull_info could store
pointers to "uint8 *" which holds NOT NULL info corresponding to each
window function argument. Moreover, WindowObject->num_notnull_info is
changed from "int" to "int64 *" so that WindowObject->num_notnull_info
could store the number of NOT NULL info corresponding to each function
argument. Memories for these data structures will be allocated when
WinGetFuncArgInFrame or WinGetFuncArgInPartition is called. Thus no
memory except the pointers is allocated for function arguments which
do not call these functions
Also fix the set mark position logic in WinGetFuncArgInPartition to
not raise a "cannot fetch row before WindowObject's mark position"
error in IGNORE NULLS case.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Tatsuo Ishii <ishii@postgresql.org>
Discussion: https://postgr.es/m/2952409.1760023154%40sss.pgh.pa.us
|
