| Age | Commit message (Collapse) | Author |
|---|
|
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
This is a significantly enhanced version of
3a5130672296ed4e682403a77a9a3ad3d21cef75 (that was later reverted).
There is also much more test coverage for various psql features now.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com> (earlier version)
Reviewed-by: Daniel Verite <daniel@manitou-mail.org> (earlier version)
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Reviewed-by: vignesh C <vignesh21@gmail.com> (earlier version)
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
|
|
Generally if a role is granted membership to another role with NOINHERIT
they must use SET ROLE to access the privileges of that role, however
with predefined roles the membership and privilege is conflated. Fix that
by replacing is_member_of_role with has_privs_for_role for predefined
roles. Patch does not remove is_member_of_role from acl.h, but it does
add a warning not to use that function for privilege checking. Not
backpatched based on hackers list discussion.
Author: Joshua Brindle
Reviewed-by: Stephen Frost, Nathan Bossart, Joe Conway
Discussion: https://postgr.es/m/flat/CAGB+Vh4Zv_TvKt2tv3QNS6tUM_F_9icmuj0zjywwcgVi4PAhFA@mail.gmail.com
|
|
9e98583 introduced a helper to centralize building their needed state
(tuplestore, tuple descriptors, etc.), checking for any errors. This
commit updates all places of contrib/ that can be switched to use
SetSingleFuncCall() as a drop-in replacement, resulting in the removal
of a lot of boilerplate code in all the modules updated by this commit.
Per analysis, some places remain as they are:
- pg_logdir_ls() in adminpack/ uses historically TYPEFUNC_RECORD as
return type, and I suspect that changing it may cause issues at run-time
with some of its past versions, down to 1.0.
- dblink/ uses a wrapper function doing exactly the work of
SetSingleFuncCall(). Here the switch should be possible, but rather
invasive so it does not seem the extra backpatch maintenance cost.
- tablefunc/, similarly, uses multiple helper functions with portions of
SetSingleFuncCall() spread across the code paths of this module.
Author: Melanie Plageman
Discussion: https://postgr.es/m/CAAKRu_bvDPJoL9mH6eYwvBpPtTGQwbDzfJbCM-OjkSZDu5yTPg@mail.gmail.com
|
|
The same is done a couple of lines above, so there is no need for the
same, extra, call.
Author: Dong Wook Lee
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAAcBya+szDd1Y6dJU4_dbH_Ye3=G=8O1oQGG01kv3Tpie7wELQ@mail.gmail.com
|
|
Commit 75d22069e tried to throw a warning for setting a custom GUC whose
prefix belongs to a previously-loaded extension, if there is no such GUC
defined by the extension. But that caused unstable behavior with
parallel workers, because workers don't necessarily load extensions and
GUCs in the same order their leader did. To make that work safely, we
have to completely disallow the case. We now actually remove any such
GUCs at the time of initial extension load, and then throw an error not
just a warning if you try to add one later. While this might create a
compatibility issue for a few people, the improvement in error-detection
capability seems worth it; it's hard to believe that there's any good
use-case for choosing such GUC names.
This also un-reverts 5609cc01c (Rename EmitWarningsOnPlaceholders() to
MarkGUCPrefixReserved()), since that function's old name is now even
more of a misnomer.
Florin Irion and Tom Lane
Discussion: https://postgr.es/m/1902182.1640711215@sss.pgh.pa.us
|
|
This routine is a no-op since dd04e95 from 2003, with a macro kept
around for compatibility purposes. This has led to the same code
patterns being copy-pasted around for no effect, sometimes in confusing
ways like in pg_logical_slot_get_changes_guts() from logical.c where the
code was actually incorrect.
This issue has been discussed on two different threads recently, so
rather than living with this legacy, remove any uses of this routine in
the C code to simplify things. The compatibility macro is kept to avoid
breaking any out-of-core modules that depend on it.
Reported-by: Tatsuhito Kasahara, Justin Pryzby
Author: Tatsuhito Kasahara
Discussion: https://postgr.es/m/20211217200419.GQ17618@telsasoft.com
Discussion: https://postgr.es/m/CAP0=ZVJeeYfAeRfmzqAF2Lumdiv4S4FewyBnZd4DPTrsSQKJKw@mail.gmail.com
|
|
Backpatch-through: 10
|
|
Since 4f0b096, pgss_store() does nothing if compute_query_id is disabled
or if no other module computed a query identifier, but the top comment
of this function did not reflect that. This behavior is already
documented in its own code path, and this just removes the inconsistent
comment.
Author: Kyotaro Horiguchi
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/20211122.153823.1325120762360533122.horikyota.ntt@gmail.com
Backpatch-through: 14
|
|
Revert commits 5609cc01c, 2ed8a8cc5, and 75d22069e until we have
a less broken idea of how this should work in parallel workers.
Per buildfarm.
Discussion: https://postgr.es/m/1640909.1640638123@sss.pgh.pa.us
|
|
This seems like a clearer name for what it does now.
Provide a compatibility macro so that extensions don't have to convert
to the new name right away.
Discussion: https://postgr.es/m/116024.1640111629@sss.pgh.pa.us
|
|
psql's lexer has historically deleted dash-dash (single-line) comments
from what's collected and sent to the server. This is inconsistent
with what it does for slash-star comments, and people have complained
before that they wish such comments would be captured in the server log.
Undoing the decision completely seems like too big a behavioral change,
however. In particular, comments on lines preceding the start of a
query are generally not thought of as being part of that query.
What we can do to improve the situation is to capture comments that
are clearly *within* a query, that is after the first non-whitespace,
non-comment token but before the query's ending semicolon or backslash
command. This is a nearly trivial code change, and it affects only a
few regression test results.
(It is tempting to try to apply the same rule to slash-star comments.
But it's hard to see how to do that without getting strange history
behavior for comments that cross lines, especially if the user then
starts a new query on the same line as the star-slash. In view of
the lack of complaints, let's leave that case alone.)
Discussion: https://postgr.es/m/CAJcOf-cAdMVr7azeYR7nWKsNp7qhORzc84rV6d7m7knG5Hrtsw@mail.gmail.com
|
|
Windows fails on a request to read() more than INT_MAX bytes,
and perhaps other platforms could have similar issues. Let's
adjust this code to read at most 1GB per call.
(One would not have thought the file could get that big, but now
we have a field report of trouble, so it can. We likely ought to
add some mechanism to limit the size of the query-texts file
separately from the size of the hash table. That is not this
patch, though.)
Per bug #17254 from Yusuke Egashira. It's been like this for
awhile, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17254-a926c89dc03375c2@postgresql.org
|
|
When the newest version is loaded, the backend would load objects from
the oldest complete SQL file (here 1.4) and then update to the latest
version with transition scripts (up to 1.9 currently). This provides
some coverage for upgrades of pg_stat_statements, but there is no test
to show how things have changed across each version.
This adds a couple of tests for the upgrade paths using objects from
each version supported, stressing the objects whose behaviors have
changed across each version supported.
Author: Erica Zhang
Reviewed-by: Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/tencent_BBA974AFF61379F2345E782FD6C55891950A@qq.com
|
|
Turns out the buildfarm hasn't been testing this, which will soon change.
Julien Rouhaud, per report from me
Discussion: https://postgr.es/m/42557.1627229005@sss.pgh.pa.us
|
|
In the "simple Query" code path, it's fine for parse analysis or
execution of a utility statement to scribble on the statement's node
tree, since that'll just be thrown away afterwards. However it's
not fine if the node tree is in the plan cache, as then it'd be
corrupted for subsequent executions. Up to now we've dealt with
that by having individual utility-statement functions apply
copyObject() if they were going to modify the tree. But that's
prone to errors of omission. Bug #17053 from Charles Samborski
shows that CREATE/ALTER DOMAIN didn't get this memo, and can
crash if executed repeatedly from plan cache.
In the back branches, we'll just apply a narrow band-aid for that,
but in HEAD it seems prudent to have a more principled fix that
will close off the possibility of other similar bugs in future.
Hence, let's hoist the responsibility for doing copyObject up into
ProcessUtility from its children, thus ensuring that it happens for
all utility statement types.
Also, modify ProcessUtility's API so that its callers can tell it
whether a copy step is necessary. It turns out that in all cases,
the immediate caller knows whether the node tree is transient, so
this doesn't involve a huge amount of code thrashing. In this way,
while we lose a little bit in the execute-from-cache code path due
to sometimes copying node trees that wouldn't be mutated anyway,
we gain something in the simple-Query code path by not copying
throwaway node trees. Statements that are complex enough to be
expensive to copy are almost certainly ones that would have to be
copied anyway, so the loss in the cache code path shouldn't be much.
(Note that this whole problem applies only to utility statements.
Optimizable statements don't have the issue because we long ago made
the executor treat Plan trees as read-only. Perhaps someday we will
make utility statement execution act likewise, but I'm not holding
my breath.)
Discussion: https://postgr.es/m/931771.1623893989@sss.pgh.pa.us
Discussion: https://postgr.es/m/17053-3ca3f501bbc212b4@postgresql.org
|
|
Allowing only on/off meant that all either all existing configuration
guides would become obsolete if we disabled it by default, or that we
would have to accept a performance loss in the default config if we
enabled it by default. By allowing 'auto' as a middle ground, the
performance cost is only paid by those who enable pg_stat_statements and
similar modules.
I only edited the release notes to comment-out a paragraph that is now
factually wrong; further edits are probably needed to describe the
related change in more detail.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20210513002623.eugftm4nk2lvvks3@nol
|
|
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
|
|
EXPLAIN ANALYZE for an async-capable ForeignScan node associated with
postgres_fdw is done just by using instrumentation for ExecProcNode()
called from the node's callbacks, causing the following problems:
1) If the remote table to scan is empty, the node is incorrectly
considered as "never executed" by the command even if the node is
executed, as ExecProcNode() isn't called from the node's callbacks at
all in that case.
2) The command fails to collect timings for things other than
ExecProcNode() done in the node, such as creating a cursor for the
node's remote query.
To fix these problems, add instrumentation for async-capable nodes, and
modify postgres_fdw accordingly.
My oversight in commit 27e1f1456.
While at it, update a comment for the AsyncRequest struct in execnodes.h
and the documentation for the ForeignAsyncRequest API in fdwhandler.sgml
to match the code in ExecAsyncAppendResponse() in nodeAppend.c, and fix
typos in comments in nodeAppend.c.
Per report from Andrey Lepikhov, though I didn't use his patch.
Reviewed-by: Andrey Lepikhov
Discussion: https://postgr.es/m/2eb662bb-105d-fc20-7412-2f027cc3ca72%40postgrespro.ru
|
|
Properly fix:
- the "ONLY" in FROM [ONLY] isn't hashed
- the agglevelsup field in GROUPING isn't hashed
- WITH TIES not being hashed (new in PG 13)
- "DISTINCT" in "GROUP BY [DISTINCT]" isn't hashed (new in PG 14)
Reported-by: Julien Rouhaud
Discussion: https://postgr.es/m/20210425081119.ulyzxqz23ueh3wuj@nol
|
|
This reverts commit 3a5130672296ed4e682403a77a9a3ad3d21cef75.
Per discussion, this patch had too many issues to resolve at this
point of the development cycle. We'll try again in the future.
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
|
|
Ignore parallel workers in pg_stat_statements
Oversight in 4f0b0966c8 which exposed queryid in parallel workers.
Counters are aggregated by the main backend process so parallel workers
would report duplicated activity, and could also report activity for the
wrong entry as they are only aware of the top level queryid.
Fix thinko in pg_stat_get_activity when retrieving the queryid.
Remove unnecessary call to pgstat_report_queryid().
Reported-by: Amit Kapila, Andres Freund, Thomas Munro
Discussion: https://postgr.es/m/20210408051735.lfbdzun5zdlax5gd@alap3.anarazel.de p634GTSOqnDW86Owrn6qDAVosC5dJjXjp7BMfc5Gz1Q@mail.gmail.com
Author: Julien Rouhaud
|
|
v1.9 is already new in this version of PostgreSQL, so turn it into just
one change.
Author: Julien Rohaud
Discussion: https://postgr.es/m/20210408120505.7zinijtdexbyghvb@nol
|
|
Changing pg_stat_statements.track between 'all' and 'top' would control
if pg_stat_statements tracked just top level statements or also
statements inside functions, but when tracking all it would not
differentiate between the two. Being table to differentiate this is
useful both to track where the actual query is coming from, and to see
if there are differences in executions between the two.
To do this, add a boolean to the hash key indicating if the statement
was top level or not.
Experience from the pg_stat_kcache module shows that in at least some
"reasonable worloads" only <5% of the queries show up both top level and
nested. Based on this, admittedly small, dataset, this patch does not
try to de-duplicate those query *texts*, and will just store one copy
for the top level and one for the nested.
Author: Julien Rohaud
Reviewed-By: Magnus Hagander, Masahiro Ikeda
Discussion: https://postgr.es/m/20201202040516.GA43757@nol
|
|
Use the in-core query id computation for pg_stat_activity,
log_line_prefix, and EXPLAIN VERBOSE.
Similar to other fields in pg_stat_activity, only the queryid from the
top level statements are exposed, and if the backends status isn't
active then the queryid from the last executed statements is displayed.
Add a %Q placeholder to include the queryid in log_line_prefix, which
will also only expose top level statements.
For EXPLAIN VERBOSE, if a query identifier has been computed, either by
enabling compute_query_id or using a third-party module, display it.
Bump catalog version.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
|
|
Add compute_query_id GUC to control whether a query identifier should be
computed by the core (off by default). It's thefore now possible to
disable core queryid computation and use pg_stat_statements with a
different algorithm to compute the query identifier by using a
third-party module.
To ensure that a single source of query identifier can be used and is
well defined, modules that calculate a query identifier should throw an
error if compute_query_id specified to compute a query id and if a query
idenfitier was already calculated.
Discussion: https://postgr.es/m/20210407125726.tkvjdbw76hxnpwfi@nol
Author: Julien Rouhaud
Reviewed-by: Alvaro Herrera, Nitin Jadhav, Zhihong Yu
|
|
Previously, psql printed only the last result if a command string
returned multiple result sets. Now it prints all of them. The
previous behavior can be obtained by setting the psql variable
SHOW_ALL_RESULTS to off.
Author: Fabien COELHO <coelho@cri.ensmp.fr>
Reviewed-by: "Iwata, Aya" <iwata.aya@jp.fujitsu.com>
Reviewed-by: Daniel Verite <daniel@manitou-mail.org>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/alpine.DEB.2.21.1904132231510.8961@lancre
|
|
An upcoming patch might remove the (now indirect) proc.h
include (which in turn includes other headers), and it's cleaner for
the modified files to include their dependencies directly anyway...
Discussion: https://postgr.es/m/20210402194458.2vu324hkk2djq6ce@alap3.anarazel.de
|
|
The term 'default roles' wasn't quite apt as these roles aren't able to
be modified or removed after installation, so rename them to be
'Predefined Roles' instead, adding an entry into the newly added
Obsolete Appendix to help users of current releases find the new
documentation.
Bruce Momjian and Stephen Frost
Discussion: https://postgr.es/m/157742545062.1149.11052653770497832538%40wrigleys.postgresql.org
and https://www.postgresql.org/message-id/20201120211304.GG16415@tamriel.snowman.net
|
|
Other code paths are already protected against this case, and _PG_init()
warns about that in pg_stat_statements.c. While on it, I have checked
the other extensions of the tree but did not notice any holes.
Oversight in 9fbc3f3.
Author: Jaime Casanova
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/CAJKUy5gF4=_=qhJ1VX_tSGFfjKHb9BvzhRYWSApJD=Bfwp2SBw@mail.gmail.com
|
|
Backpatch-through: 9.5
|
|
This fixes several areas of the documentation and some comments in
matters of style, grammar, or even format.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20201222041153.GK30237@telsasoft.com
|
|
This commit adds "stats_reset" column into the pg_stat_statements_info
view. This column indicates the time at which all statistics in the
pg_stat_statements view were last reset.
Per discussion, this commit also changes pg_stat_statements_info code
so that "dealloc" column is reset at the same time as "stats_reset" is reset,
i.e., whenever all pg_stat_statements entries are removed, for the sake
of consistency. Previously "dealloc" was reset only when
pg_stat_statements_reset(0, 0, 0) is called and was not reset when
pg_stat_statements_reset() with non-zero value argument discards all
entries. This was confusing.
Author: Naoki Nakamichi, Yuki Seino
Reviewed-by: Yuki Seino, Kyotaro Horiguchi, Li Japin, Fujii Masao
Discussion: https://postgr.es/m/c102cf3180d0ee73c1c5a0f7f8558322@oss.nttdata.com
|
|
Invent a new flag bit HASH_STRINGS to specify C-string hashing, which
was formerly the default; and add assertions insisting that exactly
one of the bits HASH_STRINGS, HASH_BLOBS, and HASH_FUNCTION be set.
This is in hopes of preventing recurrences of the type of oversight
fixed in commit a1b8aa1e4 (i.e., mistakenly omitting HASH_BLOBS).
Also, when HASH_STRINGS is specified, insist that the keysize be
more than 8 bytes. This is a heuristic, but it should catch
accidental use of HASH_STRINGS for integer or pointer keys.
(Nearly all existing use-cases set the keysize to NAMEDATALEN or
more, so there's little reason to think this restriction should
be problematic.)
Tweak hash_create() to insist that the HASH_ELEM flag be set, and
remove the defaults it had for keysize and entrysize. Since those
defaults were undocumented and basically useless, no callers
omitted HASH_ELEM anyway.
Also, remove memset's zeroing the HASHCTL parameter struct from
those callers that had one. This has never been really necessary,
and while it wasn't a bad coding convention it was confusing that
some callers did it and some did not. We might as well save a few
cycles by standardizing on "not".
Also improve the documentation for hash_create().
In passing, improve reinit.c's usage of a hash table by storing
the key as a binary Oid rather than a string; and, since that's
a temporary hash table, allocate it in CurrentMemoryContext for
neatness.
Discussion: https://postgr.es/m/590625.1607878171@sss.pgh.pa.us
|
|
If more distinct statements than pg_stat_statements.max are observed,
pg_stat_statements entries about the least-executed statements are
deallocated. This commit enables us to track the total number of times
those entries were deallocated. That number can be viewed in the
pg_stat_statements_info view that this commit adds. It's useful when
tuning pg_stat_statements.max parameter. If it's high, i.e., the entries
are deallocated very frequently, which might cause the performance
regression and we can increase pg_stat_statements.max to avoid those
frequent deallocations.
The pg_stat_statements_info view is intended to display the statistics
of pg_stat_statements module itself. Currently it has only one column
"dealloc" indicating the number of times entries were deallocated.
But an upcoming patch will add other columns (for example, the time
at which pg_stat_statements statistics were last reset) into the view.
Author: Katsuragi Yuta, Yuki Seino
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/0d9f1107772cf5c3f954e985464c7298@oss.nttdata.com
|
|
Commit 6023b7ea71 allowed pg_stat_statements to track the number
of rows retrieved or affected by some utility commands including
CREATE MATERIALIZED VIEW. However it did not track the rowcount
of REFRESH MATERIALIZED VIEW. This commit allows pg_stat_statements
to track that.
To track that, this commit changes the query completion for
REFRESH MATERIALIZED VIEW so that it saves the rowcount. But note that
the rowcount is still not displayed in the command completion tag output.
That is, the display_rowcount flag of CMDTAG_REFRESH_MATERIALIZED_VIEW
command tag is left false in cmdtaglist.h. Otherwise, the change of
completion tag output might break applications using it.
Author: Katsuragi Yuta, Seino Yuki
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/71f6bc72f8bbaa06e701f8bd2562c347@oss.nttdata.com
Discussion: https://postgr.es/m/aadbfba9-e4bb-9531-6b3a-d13c31c8f4fe@oss.nttdata.com
|
|
unused since f0d6f20278b7c5c412ce40a9b86c6b31dc2fbfdd
Discussion: https://www.postgresql.org/message-id/flat/511bb100-f829-ba21-2f10-9f952ec06ead%402ndquadrant.com
|
|
This commit makes pg_stat_statements track the total number
of rows retrieved or affected by CREATE TABLE AS, SELECT INTO,
CREATE MATERIALIZED VIEW and FETCH commands.
Suggested-by: Pascal Legrand
Author: Fujii Masao
Reviewed-by: Asif Rehman
Discussion: https://postgr.es/m/1584293755198-0.post@n3.nabble.com
|
|
|
|
Since v13 pg_stat_statements is allowed to track the planning time of
statements when track_planning option is enabled. Its default was on.
But this feature could cause more terrible spinlock contentions in
pg_stat_statements. As a result of this, Robins Tharakan reported that
v13 beta1 showed ~45% performance drop at high DB connection counts
(when compared with v12.3) during fully-cached SELECT-only test using
pgbench.
To avoid this performance regression by the default setting,
this commit changes default of pg_stat_statements.track_planning to off.
Back-patch to v13 where pg_stat_statements.track_planning was introduced.
Reported-by: Robins Tharakan
Author: Fujii Masao
Reviewed-by: Julien Rouhaud
Discussion: https://postgr.es/m/2895b53b033c47ccb22972b589050dd9@EX13D05UWC001.ant.amazon.com
|
|
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
|
|
In commit 33e05f89c5, we have added the option to display WAL usage
statistics in Explain and auto_explain. The display format used two spaces
between each field which is inconsistent with Buffer usage statistics which
is using one space between each field. Change the format to make WAL usage
statistics consistent with Buffer usage statistics.
This commit also changed the usage of "full page writes" to
"full page images" for WAL usage statistics to make it consistent with
other parts of code and docs.
Author: Julien Rouhaud, Amit Kapila
Reviewed-by: Justin Pryzby, Kyotaro Horiguchi and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
|
|
Reported-by: Justin Pryzby and Euler Taveira
Author: Justin Pryzby and Julien Rouhaud
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
|
|
This commit adds three new columns in pg_stat_statements output to
display WAL usage statistics added by commit df3b181499.
This commit doesn't bump the version of pg_stat_statements as the
same is done for this release in commit 17e0328224.
Author: Kirill Bychik and Julien Rouhaud
Reviewed-by: Julien Rouhaud, Fujii Masao, Dilip Kumar and Amit Kapila
Discussion: https://postgr.es/m/CAB-hujrP8ZfUkvL5OYETipQwA=e3n7oqHFU=4ZLxWS_Cza3kQQ@mail.gmail.com
|
|
|
|
This commit makes pg_stat_statements support new GUC
pg_stat_statements.track_planning. If this option is enabled,
pg_stat_statements tracks the planning statistics of the statements,
e.g., the number of times the statement was planned, the total time
spent planning the statement, etc. This feature is useful to check
the statements that it takes a long time to plan. Previously since
pg_stat_statements tracked only the execution statistics, we could
not use that for the purpose.
The planning and execution statistics are stored at the end of
each phase separately. So there are not always one-to-one relationship
between them. For example, if the statement is successfully planned
but fails in the execution phase, only its planning statistics are stored.
This may cause the users to be able to see different pg_stat_statements
results from the previous version. To avoid this,
pg_stat_statements.track_planning needs to be disabled.
This commit bumps the version of pg_stat_statements to 1.8
since it changes the definition of pg_stat_statements function.
Author: Julien Rouhaud, Pascal Legrand, Thomas Munro, Fujii Masao
Reviewed-by: Sergei Kornilov, Tomas Vondra, Yoshikazu Imai, Haribabu Kommi, Tom Lane
Discussion: https://postgr.es/m/CAHGQGwFx_=DO-Gu-MfPW3VQ4qC7TfVdH2zHmvZfrGv6fQ3D-Tw@mail.gmail.com
Discussion: https://postgr.es/m/CAEepm=0e59Y_6Q_YXYCTHZkqOc6H2pJ54C_Xe=VFu50Aqqp_sA@mail.gmail.com
Discussion: https://postgr.es/m/DB6PR0301MB21352F6210E3B11934B0DCC790B00@DB6PR0301MB2135.eurprd03.prod.outlook.com
|
|
Previously pg_stat_statements calculated the difference of buffer counters
by its own code even while BufferUsageAccumDiff() had the same code.
This commit expose BufferUsageAccumDiff() and makes pg_stat_statements
use it for the calculation, in order to simply the code.
This change also would be useful for the upcoming patch for the planning
counters in pg_stat_statements because the patch will add one more code
for the calculation of difference of buffer counters and that can easily be
done by using BufferUsageAccumDiff().
Author: Julien Rouhaud
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/bdfee4e0-a304-2498-8da5-3cb52c0a193e@oss.nttdata.com
|
|
Thinko in 2f9661311. Per buildfarm, as well as warning seen locally.
|
|
The backend was using strings to represent command tags and doing string
comparisons in multiple places, but that's slow and unhelpful. Create a
new command list with a supporting structure to use instead; this is
stored in a tag-list-file that can be tailored to specific purposes with
a caller-definable C macro, similar to what we do for WAL resource
managers. The first first such uses are a new CommandTag enum and a
CommandTagBehavior struct.
Replace numerous occurrences of char *completionTag with a
QueryCompletion struct so that the code no longer stores information
about completed queries in a cstring. Only at the last moment, in
EndCommand(), does this get converted to a string.
EventTriggerCacheItem no longer holds an array of palloc’d tag strings
in sorted order, but rather just a Bitmapset over the CommandTags.
Author: Mark Dilger, with unsolicited help from Álvaro Herrera
Reviewed-by: John Naylor, Tom Lane
Discussion: https://postgr.es/m/981A9DB4-3F0C-4DA5-88AD-CB9CFF4D6CAD@enterprisedb.com
|
|
This also involves renaming src/include/utils/hashutils.h, which
becomes src/include/common/hashfn.h. Perhaps an argument can be
made for keeping the hashutils.h name, but it seemed more
consistent to make it match the name of the file, and also more
descriptive of what is actually going on here.
Patch by me, reviewed by Suraj Kharage and Mark Dilger. Off-list
advice on how not to break the Windows build from Davinder Singh
and Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoaRiG4TXND8QuM6JXFRkM_1wL2ZNhzaUKsuec9-4yrkgw@mail.gmail.com
|
|
Andres Freund pointed out that allowing non-superusers to run
"CREATE EXTENSION ... FROM unpackaged" has security risks, since
the unpackaged-to-1.0 scripts don't try to verify that the existing
objects they're modifying are what they expect. Just attaching such
objects to an extension doesn't seem too dangerous, but some of them
do more than that.
We could have resolved this, perhaps, by still requiring superuser
privilege to use the FROM option. However, it's fair to ask just what
we're accomplishing by continuing to lug the unpackaged-to-1.0 scripts
forward. None of them have received any real testing since 9.1 days,
so they may not even work anymore (even assuming that one could still
load the previous "loose" object definitions into a v13 database).
And an installation that's trying to go from pre-9.1 to v13 or later
in one jump is going to have worse compatibility problems than whether
there's a trivial way to convert their contrib modules into extension
style.
Hence, let's just drop both those scripts and the core-code support
for "CREATE EXTENSION ... FROM".
Discussion: https://postgr.es/m/20200213233015.r6rnubcvl4egdh5r@alap3.anarazel.de
|
