| Age | Commit message (Collapse) | Author |
|---|
|
We must tell init about each role name we plan to connect as,
else SSPI auth fails. Similar to previous patches such as
14793f471, 973542866.
Oversight in 208927e65, per buildfarm member drongo.
(Although that was back-patched to v13, the test script
only exists in v16 and up.)
|
|
pg_prewarm() currently checks for SELECT privileges on the target
relation. However, indexes do not have access rights of their own,
so a role may be denied permission to prewarm an index despite
having the SELECT privilege on its parent table. This commit fixes
this by locking the parent table before the index (to avoid
deadlocks) and checking for SELECT on the parent table. Note that
the code is largely borrowed from
amcheck_lock_relation_and_check().
An obvious downside of this change is the extra AccessShareLock on
the parent table during prewarming, but that isn't expected to
cause too much trouble in practice.
Author: Ayush Vatsa <ayushvatsa1810@gmail.com>
Co-authored-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/CACX%2BKaMz2ZoOojh0nQ6QNBYx8Ak1Dkoko%3DD4FSb80BYW%2Bo8CHQ%40mail.gmail.com
Backpatch-through: 13
|
|
The TAP tests whose ok() calls are changed in this commit were relying
on perl operators, rather than equivalents available in Test::More. For
example, rather than the following:
ok($data =~ qr/expr/m, "expr matching");
ok($data !~ qr/expr/m, "expr not matching");
The new test code uses this equivalent:
like($data, qr/expr/m, "expr matching");
unlike($data, qr/expr/m, "expr not matching");
A huge benefit of the new formulation is that it is possible to know
about the values we are checking if a failure happens, making debugging
easier, should the test runs happen in the buildfarm, in the CI or
locally.
This change leads to more test code overall as perltidy likes to make
the code pretty the way it is in this commit.
Author: Sadhuprasad Patro <b.sadhu@gmail.com>
Discussion: https://postgr.es/m/CAFF0-CHhwNx_Cv2uy7tKjODUbeOgPrJpW4Rpf1jqB16_1bU2sg@mail.gmail.com
|
|
If inside an EPQ recheck, ExecScanFetch would run the recheck method
function for foreign/custom joins even if they aren't descendant nodes
in the EPQ recheck plan tree, which is problematic at least in the
foreign-join case, because such a foreign join isn't guaranteed to have
an alternative local-join plan required for running the recheck method
function; in the postgres_fdw case this could lead to a segmentation
fault or an assert failure in an assert-enabled build when running the
recheck method function.
Even if inside an EPQ recheck, any scan nodes that aren't descendant
ones in the EPQ recheck plan tree should be normally processed by using
the access method function; fix by modifying ExecScanFetch so that if
inside an EPQ recheck, it runs the recheck method function for
foreign/custom joins that are descendant nodes in the EPQ recheck plan
tree as before and runs the access method function for foreign/custom
joins that aren't.
This fix also adds to postgres_fdw an isolation test for an EPQ recheck
that caused issues stated above.
Oversight in commit 385f337c9.
Reported-by: Kristian Lejao <kristianlejao@gmail.com>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Co-authored-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CAD21AoBpo6Gx55FBOW+9s5X=nUw3Xpq64v35fpDEKsTERnc4TQ@mail.gmail.com
Backpatch-through: 13
|
|
The present coding of dblink's get_rel_from_relname() predates the
introduction of RangeVarGetRelidExtended(), which provides a way to
check permissions before locking the relation. This commit adjusts
get_rel_from_relname() to use that function.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/aOgmi6avE6qMw_6t%40nathan
|
|
This commit introduces a new column mem_exceeded_count to the
pg_stat_replication_slots view. This counter tracks how often the
memory used by logical decoding exceeds the logical_decoding_work_mem
limit. The new statistic helps users determine whether exceeding the
logical_decoding_work_mem limit is a rare occurrences or a frequent
issue, information that wasn't available through existing statistics.
Bumps catversion.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/978D21E8-9D3B-40EA-A4B1-F87BABE7868C@yesql.se
|
|
This allows extensions to have access to any data they've stored
in the ExplainState during planning. Unfortunately, it won't help
with EXPLAIN EXECUTE is used, but since that case is less common,
this still seems like an improvement.
Since planner() has quite a few arguments now, also add some
documentation of those arguments and the return value.
Author: Robert Haas <rhaas@postgresql.org>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: http://postgr.es/m/CA+TgmoYWKHU2hKr62Toyzh-kTDEnMDeLw7gkOOnjL-TnOUq0kQ@mail.gmail.com
|
|
Eager aggregation is a query optimization technique that partially
pushes aggregation past a join, and finalizes it once all the
relations are joined. Eager aggregation may reduce the number of
input rows to the join and thus could result in a better overall plan.
In the current planner architecture, the separation between the
scan/join planning phase and the post-scan/join phase means that
aggregation steps are not visible when constructing the join tree,
limiting the planner's ability to exploit aggregation-aware
optimizations. To implement eager aggregation, we collect information
about aggregate functions in the targetlist and HAVING clause, along
with grouping expressions from the GROUP BY clause, and store it in
the PlannerInfo node. During the scan/join planning phase, this
information is used to evaluate each base or join relation to
determine whether eager aggregation can be applied. If applicable, we
create a separate RelOptInfo, referred to as a grouped relation, to
represent the partially-aggregated version of the relation and
generate grouped paths for it.
Grouped relation paths can be generated in two ways. The first method
involves adding sorted and hashed partial aggregation paths on top of
the non-grouped paths. To limit planning time, we only consider the
cheapest or suitably-sorted non-grouped paths in this step.
Alternatively, grouped paths can be generated by joining a grouped
relation with a non-grouped relation. Joining two grouped relations
is currently not supported.
To further limit planning time, we currently adopt a strategy where
partial aggregation is pushed only to the lowest feasible level in the
join tree where it provides a significant reduction in row count.
This strategy also helps ensure that all grouped paths for the same
grouped relation produce the same set of rows, which is important to
support a fundamental assumption of the planner.
For the partial aggregation that is pushed down to a non-aggregated
relation, we need to consider all expressions from this relation that
are involved in upper join clauses and include them in the grouping
keys, using compatible operators. This is essential to ensure that an
aggregated row from the partial aggregation matches the other side of
the join if and only if each row in the partial group does. This
ensures that all rows within the same partial group share the same
"destiny", which is crucial for maintaining correctness.
One restriction is that we cannot push partial aggregation down to a
relation that is in the nullable side of an outer join, because the
NULL-extended rows produced by the outer join would not be available
when we perform the partial aggregation, while with a
non-eager-aggregation plan these rows are available for the top-level
aggregation. Pushing partial aggregation in this case may result in
the rows being grouped differently than expected, or produce incorrect
values from the aggregate functions.
If we have generated a grouped relation for the topmost join relation,
we finalize its paths at the end. The final paths will compete in the
usual way with paths built from regular planning.
The patch was originally proposed by Antonin Houska in 2017. This
commit reworks various important aspects and rewrites most of the
current code. However, the original patch and reviews were very
useful.
Author: Richard Guo <guofenglinux@gmail.com>
Author: Antonin Houska <ah@cybertec.at> (in an older version)
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me> (in an older version)
Reviewed-by: Andy Fan <zhihuifan1213@163.com> (in an older version)
Reviewed-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com> (in an older version)
Discussion: https://postgr.es/m/CAMbWs48jzLrPt1J_00ZcPZXWUQKawQOFE8ROc-ADiYqsqrpBNw@mail.gmail.com
|
|
Previously, subqueries were given names only after they were planned,
which makes it difficult to use information from a previous execution of
the query to guide future planning. If, for example, you knew something
about how you want "InitPlan 2" to be planned, you won't know whether
the subquery you're currently planning will end up being "InitPlan 2"
until after you've finished planning it, by which point it's too late to
use the information that you had.
To fix this, assign each subplan a unique name before we begin planning
it. To improve consistency, use textual names for all subplans, rather
than, as we did previously, a mix of numbers (such as "InitPlan 1") and
names (such as "CTE foo"), and make sure that the same name is never
assigned more than once.
We adopt the somewhat arbitrary convention of using the type of sublink
to set the plan name; for example, a query that previously had two
expression sublinks shown as InitPlan 2 and InitPlan 1 will now end up
named expr_1 and expr_2. Because names are assigned before rather than
after planning, some of the regression test outputs show the numerical
part of the name switching positions: what was previously SubPlan 2 was
actually the first one encountered, but we finished planning it later.
We assign names even to subqueries that aren't shown as such within the
EXPLAIN output. These include subqueries that are a FROM clause item or
a branch of a set operation, rather than something that will be turned
into an InitPlan or SubPlan. The purpose of this is to make sure that,
below the topmost query level, there's always a name for each subquery
that is stable from one planning cycle to the next (assuming no changes
to the query or the database schema).
Author: Robert Haas <rhaas@postgresql.org>
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: http://postgr.es/m/3641043.1758751399@sss.pgh.pa.us
|
|
This is not at all needed; I suspect it was a simple mistake in commit
5408e233f066. It causes htup_details.h to bleed into a huge number of
places via execnodes.h. Remove it and fix fallout.
Discussion: https://postgr.es/m/202510021240.ptc2zl5cvwen@alvherre.pgsql
|
|
pgstattuple checks the state of the pages retrieved for gist and hash
using some check functions from each index AM, respectively
gistcheckpage() and _hash_checkpage(). When these are called, they
would fail when bumping on data that is found as incorrect (like opaque
area size not matching, or empty pages), contrary to btree that simply
discards these cases and continues to aggregate data.
Zero pages can happen after a crash, with these AMs being able to do an
internal cleanup when these are seen. Also, sporadic failures are
annoying when doing for example a large-scale diagnostic query based on
pgstattuple with a join of pg_class, as it forces one to use tricks like
quals to discard hash or gist indexes, or use a PL wrapper able to catch
errors.
This commit changes the reports generated for btree, gist and hash to
be more user-friendly;
- When seeing an empty page, report it as free space. This new rule
applies to gist and hash, and already applied to btree.
- For btree, a check based on the size of BTPageOpaqueData is added.
- For gist indexes, gistcheckpage() is not called anymore, replaced by a
check based on the size of GISTPageOpaqueData.
- For hash indexes, instead of _hash_getbuf_with_strategy(), use a
direct call to ReadBufferExtended(), coupled with a check based on
HashPageOpaqueData. The opaque area size check was already used.
- Pages that do not match these criterias are discarded from the stats
reports generated.
There have been a couple of bug reports over the years that complained
about the current behavior for hash and gist, as being not that useful,
with nothing being done about it. Hence this change is backpatched down
to v13.
Reported-by: Noah Misch <noah@leadboat.com>
Author: Nitin Motiani <nitinmotiani@google.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/CAH5HC95gT1J3dRYK4qEnaywG8RqjbwDdt04wuj8p39R=HukayA@mail.gmail.com
Backpatch-through: 13
|
|
This reverts commit efcd5199d8cb8e5098f79b38d0c46004e69d1a46.
I rebased my patch series incorrectly. This patch contained unrelated
parts from another patch, which made the overall build fail. Revert
for now and reconsider.
|
|
Make some use of anonymous unions, which are allowed as of C11, as
examples and encouragement for future code, and to test compilers.
This commit changes some structures in pgcrypto.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f00a9968-388e-4f8c-b5ef-5102e962d997%40eisentraut.org
|
|
Make some use of anonymous unions, which are allowed as of C11, as
examples and encouragement for future code, and to test compilers.
This commit changes the ReorderBufferTXN struct.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/f00a9968-388e-4f8c-b5ef-5102e962d997%40eisentraut.org
|
|
Stop including utils/relcache.h in access/genam.h, and stop including
htup_details.h in nodes/tidbitmap.h. Both these files (genam.h and
tidbitmap.h) are widely used in other header files, so it's in our best
interest that they remain as lean as reasonable.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/202509291356.o5t6ny2hoa3q@alvherre.pgsql
|
|
Result nodes now include an RTI set, which is only non-NULL when they
have no subplan, and is taken from the relid set of the RelOptInfo that
the Result is generating. ExplainPreScanNode now takes notice of these
RTIs, which means that a few things get schema-qualified in the
regression tests that previously did not. This makes the output more
consistent between cases where some part of the plan tree is replaced by
a Result node and those where this does not happen.
Likewise, pg_overexplain's EXPLAIN (RANGE_TABLE) now displays the RTIs
stored in a Result node just as it already does for other RTI-bearing
node types.
Result nodes also now include a result_reason, which tells us something
about why the Result node was inserted. Using that information, EXPLAIN
now emits, where relevant, a "Replaces" line describing the origin of
a Result node.
The purpose of these changes is to allow code that inspects a Plan
tree to understand the origin of Result nodes that appear therein.
Discussion: http://postgr.es/m/CA+TgmoYeUZePZWLsSO+1FAN7UPePT_RMEZBKkqYBJVCF1s60=w@mail.gmail.com
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
|
|
Author: Chao Li <li.evan.chao@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAEoWx2=hOBCPm-Z=F15twr_23XjHeoXSbifP5GdEdtWona97wQ@mail.gmail.com
|
|
The lossy-counting algorithm that ANALYZE uses to identify most-common
array elements has a notion of cutoff frequency: elements with
frequency greater than that are guaranteed to be collected, elements
with smaller frequencies are not. In cases where we find fewer MCEs
than the stats target would permit us to store, the cutoff frequency
provides valuable additional information, to wit that there are no
non-MCEs with frequency greater than that. What the selectivity
estimation functions actually use the "minfreq" entry for is as a
ceiling on the possible frequency of non-MCEs, so using the cutoff
rather than the lowest stored MCE frequency provides a tighter bound
and more accurate estimates.
Therefore, instead of redundantly storing the minimum observed MCE
frequency, store the cutoff frequency when there are fewer tracked
values than we want. (When there are more, then of course we cannot
assert that no non-stored elements are above the cutoff frequency,
since we're throwing away some that are; so we still use the
minimum stored frequency in that case.)
Notably, this works even when none of the values are common enough
to be called MCEs. In such cases we previously stored nothing in
the STATISTIC_KIND_MCELEM pg_statistic slot, which resulted in the
selectivity functions falling back to default estimates. So in that
case we want to construct a STATISTIC_KIND_MCELEM entry that contains
no "values" but does have "numbers", to wit the three extra numbers
that the MCELEM entry type defines. A small obstacle is that
update_attstats() has traditionally stored a null, not an empty array,
when passed zero "values" for a slot. That gives rise to an MCELEM
entry that get_attstatsslot() will spit up on. The least risky
solution seems to be to adjust update_attstats() so that it will emit
a non-null (but possibly empty) array when the passed stavalues array
pointer isn't NULL, rather than conditioning that on numvalues > 0.
In other existing cases I don't believe that that changes anything.
For consistency, handle the stanumbers array the same way.
In passing, improve the comments in routines that use
STATISTIC_KIND_MCELEM data. Particularly, explain why we use
minfreq / 2 not minfreq as the estimate for non-MCE values.
Thanks to Matt Long for the suggestion that we could apply this
idea even when there are more than zero MCEs.
Reported-by: Mark Frost <FROSTMAR@uk.ibm.com>
Reported-by: Matt Long <matt@mattlong.org>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/PH3PPF1C905D6E6F24A5C1A1A1D8345B593E16FA@PH3PPF1C905D6E6.namprd15.prod.outlook.com
|
|
Commit 216a784829c introduced parallel apply workers, allowing multiple
processes to share a replication origin. To support this,
replorigin_session_setup() was extended to accept a pid argument
identifying the process using the origin.
This commit exposes that capability through the SQL interface function
pg_replication_origin_session_setup() by adding an optional pid parameter.
This enables multiple processes to coordinate replication using the same
origin when using SQL-level replication functions.
This change allows the non-builtin logical replication solutions to
implement parallel apply for large transactions.
Additionally, an existing internal error was made user-facing, as it can
now be triggered via the exposed SQL API.
Author: Doruk Yilmaz <doruk@mixrank.com>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Euler Taveira <euler@eulerto.com>
Discussion: https://postgr.es/m/CAMPB6wfe4zLjJL8jiZV5kjjpwBM2=rTRme0UCL7Ra4L8MTVdOg@mail.gmail.com
Discussion: https://postgr.es/m/CAE2gYzyTSNvHY1+iWUwykaLETSuAZsCWyryokjP6rG46ZvRgQA@mail.gmail.com
|
|
Cover contrib/pgcrypto, per buildfarm.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/443709.1757876535@sss.pgh.pa.us
Backpatch-through: 17
|
|
Up to now we've contented ourselves with a one-size-fits-all error
hint when we fail to find any match to a function or procedure call.
That was mostly okay in the beginning, but it was never great, and
since the introduction of named arguments it's really not adequate.
We at least ought to distinguish "function name doesn't exist" from
"function name exists, but not with those argument names". And the
rules for named-argument matching are arcane enough that some more
detail seems warranted if we match the argument names but the call
still doesn't work.
This patch creates a framework for dealing with these problems:
FuncnameGetCandidates and related code will now pass back a bitmask of
flags showing how far the match succeeded. This allows a considerable
amount of granularity in the reports. The set-bits-in-a-bitmask
approach means that when there are multiple candidate functions, the
report will reflect the match(es) that got the furthest, which seems
correct. Also, we can avoid mentioning "maybe add casts" unless
failure to match argument types is actually the issue.
Extend the same return-a-bitmask approach to OpernameGetCandidates.
The issues around argument names don't apply to operator syntax,
but it still seems worth distinguishing between "there is no
operator of that name" and "we couldn't match the argument types".
While at it, adjust these messages and related ones to more strictly
separate "detail" from "hint", following our message style guidelines'
distinction between those.
Reported-by: Dominique Devienne <ddevienne@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/1756041.1754616558@sss.pgh.pa.us
|
|
This is allowed in C11, so we don't need the workaround guards against
it anymore. This effectively reverts commit 382092a0cd2 that put
these guards in place.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/10d32190-f31b-40a5-b177-11db55597355@eisentraut.org
|
|
Introduced by 6b4d23feef6e, spotted while reading this area of the code.
|
|
rte->alias should point only to a user-written alias, but in these
cases that principle was violated. Fixing this causes some regression
test output changes: wherever rte->alias previously had a value and
is now NULL, rte->eref is now set to a generated name rather than to
rte->alias; and the scheme used to generate eref names differs from
what we were doing for aliases.
The upshot is that instead of "*SELECT*" or "*SELECT* %d",
EXPLAIN will now emit "unnamed_subquery" or "unnamed_subquery_%d".
But that's a reasonable descriptor, and we were already producing
that in yet other cases, so this seems not too objectionable.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Co-authored-by: Robert Haas <rhaas@postgresql.org>
Discussion: https://postgr.es/m/CA+TgmoYSYmDA2GvanzPMci084n+mVucv0bJ0HPbs6uhmMN6HMg@mail.gmail.com
|
|
This set of changes removes the list of available buffers and instead simply
uses the clock-sweep algorithm to find and return an available buffer. This
also removes the have_free_buffer() function and simply caps the
pg_autoprewarm process to at most NBuffers.
While on the surface this appears to be removing an optimization it is in fact
eliminating code that induces overhead in the form of synchronization that is
problematic for multi-core systems.
The main reason for removing the freelist, however, is not the moderate
improvement in scalability, but that having the freelist would require
dedicated complexity in several upcoming patches. As we have not been able to
find a case benefiting from the freelist...
Author: Greg Burd <greg@burd.me>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/70C6A5B5-2A20-4D0B-BC73-EB09DD62D61C@getmailspring.com
|
|
There are two ways for shared libraries to allocate their own
LWLock tranches. One way is to call RequestNamedLWLockTranche() in
a shmem_request_hook, which requires the library to be loaded via
shared_preload_libraries. The other way is to call
LWLockNewTrancheId(), which is not subject to the same
restrictions. However, LWLockNewTrancheId() does require each
backend to store the tranche's name in backend-local memory via
LWLockRegisterTranche(). This API is a little cumbersome and leads
to things like unhelpful pg_stat_activity.wait_event values in
backends that haven't loaded the library.
This commit moves these LWLock tranche names to shared memory, thus
eliminating the need for each backend to call
LWLockRegisterTranche(). Instead, the tranche name must be
provided to LWLockNewTrancheId(), which immediately makes the name
available to all backends. Since the tranche name array is
append-only, lookups can ordinarily avoid locking as long as their
local copy of the LWLock counter is greater than the requested
tranche ID.
One downside of this approach is that we now have a hard limit on
both the length of tranche names (NAMEDATALEN-1 bytes) and the
number of dynamically-allocated tranches (256). Besides a limit of
NAMEDATALEN-1 bytes for tranche names registered via
RequestNamedLWLockTranche(), no such limits previously existed. We
could avoid these new limits by using dynamic shared memory, but
the complexity involved didn't seem worth it. We briefly
considered making the tranche limit user-configurable but
ultimately decided against that, too. Since there is still a lot
of time left in the v19 development cycle, it's possible we will
revisit this choice.
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Rahila Syed <rahilasyed90@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CAA5RZ0vvED3naph8My8Szv6DL4AxOVK3eTPS0qXsaKi%3DbVdW2A%40mail.gmail.com
|
|
Several statements need to reference the current connection's current
database name and current port value. Until now, this has been
accomplished by creating dynamic SQL statements inside of a DO block,
which is not as easy to parse. It also takes away some of the
granularity of any error messages that might occur, making debugging
harder.
By capturing the connection-specific settings into psql variables, it
becomes possible to write simpler SQL statements for the FDW objects.
This eliminates most of DO blocks used in this test, making it a bit
more readable and shorter.
Author: Author: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CADkLM=cpUiJ3QF7aUthTvaVMmgQcm7QqZBRMDLhBRTR+gJX-Og@mail.gmail.com
|
|
BufferGetPage() already returns type Page, so casting it to Page
doesn't achieve anything. A sizable number of call sites does this
casting; remove that.
This was already done inconsistently in the code in the first import
in 1996 (but didn't exist in the pre-1995 code), and it was then
apparently just copied around.
Author: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/CALdSSPgFhc5=vLqHdk-zCcnztC0zEY3EU_Q6a9vPEaw7FkE9Vw@mail.gmail.com
|
|
This has been done historically because of get_database_name (which
since commit cb98e6fb8fd4 belongs in lsyscache.c/h, so let's move it
there) and get_database_oid (which is in the right place, but whose
declaration should appear in pg_database.h rather than dbcommands.h).
Clean this up.
Also, xlogreader.h and stringinfo.h are no longer needed by dbcommands.h
since commit f1fd515b393a, so remove them.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/202508191031.5ipojyuaswzt@alvherre.pgsql
|
|
Commit 4b754d6c1 introduced the concept of an excludeOnly scan key,
which cannot select matching index entries but can reject
non-matching tuples, for example a tsquery such as '!term'. There are
poorly-documented assumptions that such scan keys do not appear as the
first scan key. ginNewScanKey did nothing to ensure that, however,
with the result that certain GIN index searches could go into an
infinite loop while apparently-equivalent queries with the clauses in
a different order were fine.
Fix by teaching ginNewScanKey to place all excludeOnly scan keys
after all not-excludeOnly ones. So far as we know at present,
it might be sufficient to avoid the case where the very first
scan key is excludeOnly; but I'm not very convinced that there
aren't other dependencies on the ordering.
Bug: #19031
Reported-by: Tim Wood <washwithcare@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/19031-0638148643d25548@postgresql.org
Backpatch-through: 13
|
|
This code was relying on "long", which is signed 8 bytes everywhere
except on Windows where it is 4 bytes, that could potentially expose it
to overflows, even if the current uses in the code are fine as far as I
know. This code is now able to rely on the same sizeof() variable
everywhere, with int64. long was used for sizes, partition counts and
entry counts.
Some callers of the dynahash.c routines used long declarations, that can
be cleaned up to use int64 instead. There was one shortcut based on
SIZEOF_LONG, that can be removed. long is entirely removed from
dynahash.c and hsearch.h.
Similar work was done in b1e5c9fa9ac4.
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/aKQYp-bKTRtRauZ6@paquier.xyz
|
|
This commit adds CHECK_FOR_INTERRUPTS to loops iterating over shared
buffers in several pg_buffercache functions, allowing them to be
interrupted during long-running operations.
Backpatch to all supported versions. Add CHECK_FOR_INTERRUPTS to the
loop in pg_buffercache_pages() in all supported branches, and to
pg_buffercache_summary() and pg_buffercache_usage_counts() in version
16 and newer.
Author: SATYANARAYANA NARLAPURAM <satyanarlapuram@gmail.com>
Discussion: https://postgr.es/m/CAHg+QDcejeLx7WunFT3DX6XKh1KshvGKa8F5au8xVhqVvvQPRw@mail.gmail.com
Backpatch-through: 13
|
|
Doing that seems rather random and unnecessary. This commit removes
those and fixes fallout, which is pretty minimal. We do need to add a
forward declaration of struct TM_IndexDeleteOp (whose full definition
appears in tableam.h) so that _bt_delitems_delete_check()'s declaration
can use it.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/202508051109.lzk3lcuzsaxo@alvherre.pgsql
|
|
Remove conditionally-compiled code for the other case.
Replace uses of FLOAT8PASSBYVAL with constant "true", mainly because
it was quite confusing in cases where the type we were dealing with
wasn't float8.
I left the associated pg_control and Pg_magic_struct fields in place.
Perhaps we should get rid of them, but it would save little, so it
doesn't seem worth thinking hard about the compatibility implications.
I just labeled them "vestigial" in places where that seemed helpful.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/1749799.1752797397@sss.pgh.pa.us
|
|
The tests fixed in this commit were changing the sampling setting of a
foreign server, but then were analyzing a local table instead of a
foreign table, meaning that the test was not running for its original
purpose.
This commit changes the ANALYZE commands to analyze the foreign table,
and changes the foreign table definition to point to a valid remote
table. Attempting to analyze the foreign table "analyze_ftable" would
have failed before this commit, because "analyze_rtable1" is not defined
on the remote side.
Issue introduced by 8ad51b5f446b.
Author: Corey Huinker <corey.huinker@gmail.com>
Discussion: https://postgr.es/m/CADkLM=cpUiJ3QF7aUthTvaVMmgQcm7QqZBRMDLhBRTR+gJX-Og@mail.gmail.com
Backpatch-through: 16
|
|
Fix a couple more places where an explicit Datum conversion
is needed (not clear how we missed these in ff89e182d and
previous commits).
Replace the minority usage "(Datum) NULL" with "(Datum) 0".
The former depends on the assumption that Datum is the same
width as Pointer, the latter doesn't. Anyway consistency
is a good thing.
This is, I believe, the last of the notational mop-up needed
before we can consider changing Datum to uint64 everywhere.
It's also important cleanup for more aggressive ideas such
as making Datum a struct.
Discussion: https://postgr.es/m/1749799.1752797397@sss.pgh.pa.us
Discussion: https://postgr.es/m/8246d7ff-f4b7-4363-913e-827dadfeb145@eisentraut.org
|
|
Add various missing conversions from and to Datum. The previous code
mostly relied on implicit conversions or its own explicit casts
instead of using the correct DatumGet*() or *GetDatum() functions.
We think these omissions are harmless. Some actual bugs that were
discovered during this process have been committed
separately (80c758a2e1d, fd2ab03fea2).
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8246d7ff-f4b7-4363-913e-827dadfeb145%40eisentraut.org
|
|
before checking ->has_scram_keys. MyProcPort is NULL in background
workers. So this could crash for example if a background worker
accessed a suitable configured foreign table.
Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/27b29a35-9b96-46a9-bc1a-914140869dac%40gmail.com
|
|
The code used
return (Selectivity) 0.0;
where
PG_RETURN_FLOAT8(0.0);
would be correct.
On 64-bit systems, these are pretty much equivalent, but on 32-bit
systems, PG_RETURN_FLOAT8() correctly produces a pointer, but the old
wrong code would return a null pointer, possibly leading to a crash
elsewhere.
We think this code is actually not reachable because bqarr_in won't
accept an empty query, and there is no other function that will
create query_int values. But better be safe and not let such
incorrect code lie around.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8246d7ff-f4b7-4363-913e-827dadfeb145%40eisentraut.org
|
|
Commit 9e6104c66 disallowed transition tables on foreign tables, but
failed to account for cases where a foreign table is a child table of a
partitioned/inherited table on which transition tables exist, leading to
incorrect transition tuples collected from such foreign tables for
queries on the parent table triggering transition capture. This
occurred not only for inherited UPDATE/DELETE but for partitioned INSERT
later supported by commit 3d956d956, which should have handled it at
least for the INSERT case, but didn't.
To fix, modify ExecAR*Triggers to throw an error if the given relation
is a foreign table requesting transition capture. Also, this commit
fixes make_modifytable so that in case of an inherited UPDATE/DELETE
triggering transition capture, FDWs choose normal operations to modify
child foreign tables, not DirectModify; which is needed because they
would otherwise skip the calls to ExecAR*Triggers at execution, causing
unexpected behavior.
Author: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/CAPmGK14QJYikKzBDCe3jMbpGENnQ7popFmbEgm-XTNuk55oyHg%40mail.gmail.com
Backpatch-through: 13
|
|
These were introduced (commit efdc7d74753) at the same time as we were
moving to using the standard inttypes.h format macros (commit
a0ed19e0a9e). It doesn't seem useful to keep a new already-deprecated
interface like this with only a few users, so remove the new symbols
again and have the callers use PRIx64.
(Also, INT64_HEX_FORMAT was kind of a misnomer, since hex formats all
use unsigned types.)
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/0ac47b5d-e5ab-4cac-98a7-bdee0e2831e4%40eisentraut.org
|
|
Macros like VARDATA() and VARSIZE() should be thought of as taking
values of type pointer to struct varlena or some other related struct.
The way they are implemented, you can pass anything to it and it will
cast it right. But this is in principle incorrect. To fix, add the
required DatumGetPointer() calls. Or in a couple of cases, remove
superfluous PointerGetDatum() calls.
It is planned in a subsequent patch to change macros like VARDATA()
and VARSIZE() to inline functions, which will enforce stricter typing.
This is in preparation for that.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/928ea48f-77c6-417b-897c-621ef16685a6%40eisentraut.org
|
|
These instances were using Datum-returning functions where a
lower-level function returning uint32 would be more appropriate.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8246d7ff-f4b7-4363-913e-827dadfeb145%40eisentraut.org
|
|
Some of these were accidentally reversed, but there was no ill effect.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/8246d7ff-f4b7-4363-913e-827dadfeb145%40eisentraut.org
|
|
Currently, ALTER DATABASE/ROLE/SYSTEM RESET [ALL] with an unknown
custom GUC with a prefix reserved by MarkGUCPrefixReserved() errors
(unless a superuser runs a RESET ALL variant). This is problematic
for cases such as an extension library upgrade that removes a GUC.
To fix, simply make sure the relevant code paths explicitly allow
it. Note that we require superuser or privileges on the parameter
to reset it. This is perhaps a bit more restrictive than is
necessary, but it's not clear whether further relaxing the
requirements is safe.
Oversight in commit 88103567cb. The ALTER SYSTEM fix is dependent
on commit 2d870b4aef, which first appeared in v17. Unfortunately,
back-patching that commit would introduce ABI breakage, and while
that breakage seems unlikely to bother anyone, it doesn't seem
worth the risk. Hence, the ALTER SYSTEM part of this commit is
omitted on v15 and v16.
Reported-by: Mert Alev <mert@futo.org>
Reviewed-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/18964-ba09dea8c98fccd6%40postgresql.org
Backpatch-through: 15
|
|
This patch adds two new counters to pg_stat_statements:
- generic_plan_calls
- custom_plan_calls
These counters track how many times a prepared statement was executed
using a generic or custom plan, respectively, providing a global
equivalent at query level, for top and non-top levels, of
pg_prepared_statements whose data is restricted to a single session.
This commit builds upon e125e360020a. The module is bumped to version
1.13. PGSS_FILE_HEADER is bumped as well, something that the latest
patches touching the on-disk format of the PGSS file did not actually
bother with since 2022..
Author: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Ilia Evdokimov <ilya.evdokimov@tantorlabs.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Nikolay Samokhvalov <nik@postgres.ai>
Discussion: https://postgr.es/m/CAA5RZ0uFw8Y9GCFvafhC=OA8NnMqVZyzXPfv_EePOt+iv1T-qQ@mail.gmail.com
|
|
pgfdw_report_error has the same design fault as elog/ereport
do, namely that it might or might not return depending on elevel.
While those functions are too widely used to redesign, there are
only about 30 call sites for pgfdw_report_error, and it's not
exposed for extension use. So let's rethink it. Split it into
pgfdw_report_error() which hard-wires ERROR elevel and is marked
pg_noreturn, and pgfdw_report() which allows only elevels less
than ERROR. (Thanks to Álvaro Herrera for suggesting this naming.)
The motivation for doing this now is that in the wake of commit
80aa9848b, which removed a bunch of PG_TRYs from postgres_fdw,
we're seeing more thorough flow analysis there from C compilers
and Coverity. Marking pgfdw_report_error as noreturn where
appropriate should help prevent false-positive complaints.
We could alternatively have invented a macro wrapper similar
to what we use for elog/ereport, but that code is sufficiently
fragile that I didn't find it appetizing to make another copy.
Since 80aa9848b already changed pgfdw_report_error's signature,
this won't make back-patching any harder than it was already.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/420221.1753714491@sss.pgh.pa.us
|
|
In the wake of commit 80aa9848b, a few compilers think that
postgresAcquireSampleRowsFunc's "reltuples" might be used
uninitialized. The logic is visibly correct, both before
and after that change; presumably what happened here is that
the previous presence of a setjmp() in the function stopped
them from attempting any flow analysis at all. Add a dummy
initialization to silence the warning.
Reported-by: Ashutosh Bapat <ashutosh.bapat.oss@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAExHW5tkerCufA_F6oct5dMJ61N+yVrVgYXL7M8dD-5_zXjrDw@mail.gmail.com
|
|
Valgrind complains that the PQconninfoOption array returned by libpq
is leaked. We apparently believed that we could suppress that warning
by storing that array's address in a static variable. However, modern
C compilers are bright enough to optimize the static variable away.
We could escalate that arms race by making the variable global.
But on the whole it seems better to revise the code so that it
can free libpq's result properly. The only thing that costs
us is copying the parameter-name keywords; which seems like a
pretty negligible cost in a function that runs at most once per
process.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
|
|
This step can be checked mechanically.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Matheus Alcantara <matheusssilv97@gmail.com>
Discussion: https://postgr.es/m/2976982.1748049023@sss.pgh.pa.us
|
