| Age | Commit message (Collapse) | Author |
|---|
|
The pending list must (for correctness) always be cleaned up by vacuum, and
should (for the avoidance of surprising behavior) always be cleaned up
by an explicit call to gin_clean_pending_list, but cleanup is optional
when inserting. The old logic got this backward: cleanup was forced
if (stats == NULL), but that's going to be *false* when vacuuming and
*true* for inserts.
Masahiko Sawada, reviewed by me.
Discussion: http://postgr.es/m/CAD21AoBLUSyiYKnTYtSAbC+F=XDjiaBrOUEGK+zUXdQ8owfPKw@mail.gmail.com
|
|
If the LSN is different, the checksum will be different, too.
Ashwin Agrawal, reviewed by Michael Paquier and Kuntal Ghosh
Discussion: http://postgr.es/m/CALfoeis5iqrAU-+JAN+ZzXkpPr7+-0OAGv7QUHwFn=-wDy4o4Q@mail.gmail.com
|
|
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
The new indent version includes numerous fixes thanks to Piotr Stefaniak.
The main changes visible in this commit are:
* Nicer formatting of function-pointer declarations.
* No longer unexpectedly removes spaces in expressions using casts,
sizeof, or offsetof.
* No longer wants to add a space in "struct structname *varname", as
well as some similar cases for const- or volatile-qualified pointers.
* Declarations using PG_USED_FOR_ASSERTS_ONLY are formatted more nicely.
* Fixes bug where comments following declarations were sometimes placed
with no space separating them from the code.
* Fixes some odd decisions for comments following case labels.
* Fixes some cases where comments following code were indented to less
than the expected column 33.
On the less good side, it now tends to put more whitespace around typedef
names that are not listed in typedefs.list. This might encourage us to
put more effort into typedef name collection; it's not really a bug in
indent itself.
There are more changes coming after this round, having to do with comment
indentation and alignment of lines appearing within parentheses. I wanted
to limit the size of the diffs to something that could be reviewed without
one's eyes completely glazing over, so it seemed better to split up the
changes as much as practical.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
This is just to have a clean base state for testing of Piotr Stefaniak's
latest version of FreeBSD indent. I fixed up a couple of places where
pgindent would have changed format not-nicely. perltidy not included.
Discussion: https://postgr.es/m/VI1PR03MB119959F4B65F000CA7CD9F6BF2CC0@VI1PR03MB1199.eurprd03.prod.outlook.com
|
|
Remove some gratuituous message differences by making the AM name
previously embedded in each message be a %s instead. While at it, get
rid of terminology that's unclear and unnecessary in one message.
Discussion: https://postgr.es/m/20170523001557.bq2hbq7hxyvyw62q@alvherre.pgsql
|
|
perltidy run not included.
|
|
Not currently a problem, but could be with stricter bool behavior under
stdbool or C++.
Reviewed-by: Andres Freund <andres@anarazel.de>
|
|
There are no functional changes here; this simply encapsulates knowledge
of the ItemPointerData struct so that a future patch can change things
without more breakage.
All direct users of ip_blkid and ip_posid are changed to use existing
macros ItemPointerGetBlockNumber and ItemPointerGetOffsetNumber
respectively. For callers where that's inappropriate (because they
Assert that the itempointer is is valid-looking), add
ItemPointerGetBlockNumberNoCheck and ItemPointerGetOffsetNumberNoCheck,
which lack the assertion but are otherwise identical.
Author: Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdNnFon4cJiL=h1mZH3bgUeU+sWHuU4Yr8AB=j3A2p1GiA@mail.gmail.com
|
|
GIN vacuum during cleaning posting tree can lock this whole tree for a long
time with by holding LockBufferForCleanup() on root. Patch changes it with
two ways: first, cleanup lock will be taken only if there is an empty page
(which should be deleted) and, second, it tries to lock only subtree, not the
whole posting tree.
Author: Andrey Borodin with minor editorization by me
Reviewed-by: Jeff Davis, me
https://commitfest.postgresql.org/13/896/
|
|
When a shared iterator is used, each call to tbm_shared_iterate()
returns a result that has not yet been returned to any process
attached to the shared iterator. In other words, each cooperating
processes gets a disjoint subset of the full result set, but all
results are returned exactly once.
This is infrastructure for parallel bitmap heap scan.
Dilip Kumar. The larger patch set of which this is a part has been
reviewed and tested by (at least) Andres Freund, Amit Khandekar,
Tushar Ahuja, Rafia Sabih, Haribabu Kommi, and Thomas Munro.
Discussion: http://postgr.es/m/CAFiTN-uc4=0WxRGfCzs-xfkMYcSEWUC-Fon6thkJGjkh9i=13A@mail.gmail.com
|
|
In combination with 569174f1be92be93f5366212cc46960d28a5c5cd, which
taught the btree AM how to perform parallel index scans, this allows
parallel index scan plans on btree indexes. This infrastructure
should be general enough to support parallel index scans for other
index AMs as well, if someone updates them to support parallel
scans.
Amit Kapila, reviewed and tested by Anastasia Lubennikova, Tushar
Ahuja, and Haribabu Kommi, and me.
|
|
The xlog-specific headers need to be included in both frontend code -
specifically, pg_waldump - and the backend, but the remainder of the
private headers for each index are only needed by the backend. By
splitting the xlog stuff out into separate headers, pg_waldump pulls
in fewer backend headers, which is a good thing.
Patch by me, reviewed by Michael Paquier and Andres Freund, per a
complaint from Dilip Kumar.
Discussion: http://postgr.es/m/CA+TgmoZ=F=GkxV0YEv-A8tb+AEGy_Qa7GSiJ8deBKFATnzfEug@mail.gmail.com
|
|
It's always been possible for index AMs to cache data across successive
amgettuple calls within a single SQL command: the IndexScanDesc.opaque
field is meant for precisely that. However, no comparable facility
exists for amortizing setup work across successive aminsert calls.
This patch adds such a feature and teaches GIN, GIST, and BRIN to use it
to amortize catalog lookups they'd previously been doing on every call.
(The other standard index AMs keep everything they need in the relcache,
so there's little to improve there.)
For GIN, the overall improvement in a statement that inserts many rows
can be as much as 10%, though it seems a bit less for the other two.
In addition, this makes a really significant difference in runtime
for CLOBBER_CACHE_ALWAYS tests, since in those builds the repeated
catalog lookups are vastly more expensive.
The reason this has been hard up to now is that the aminsert function is
not passed any useful place to cache per-statement data. What I chose to
do is to add suitable fields to struct IndexInfo and pass that to aminsert.
That's not widening the index AM API very much because IndexInfo is already
within the ken of ambuild; in fact, by passing the same info to aminsert
as to ambuild, this is really removing an inconsistency in the AM API.
Discussion: https://postgr.es/m/27568.1486508680@sss.pgh.pa.us
|
|
When the new GUC wal_consistency_checking is set to a non-empty value,
it triggers recording of additional full-page images, which are
compared on the standby against the results of applying the WAL record
(without regard to those full-page images). Allowable differences
such as hints are masked out, and the resulting pages are compared;
any difference results in a FATAL error on the standby.
Kuntal Ghosh, based on earlier patches by Michael Paquier and Heikki
Linnakangas. Extensively reviewed and revised by Michael Paquier and
by me, with additional reviews and comments from Amit Kapila, Álvaro
Herrera, Simon Riggs, and Peter Eisentraut.
|
|
This patch doesn't actually make any index AM parallel-aware, but it
provides the necessary functions at the AM layer to do so.
Rahila Syed, Amit Kapila, Robert Haas
|
|
This avoids that builtins.h has to include additional header files.
|
|
Gen_fmgrtab.pl creates a new file fmgrprotos.h, which contains
prototypes for all functions registered in pg_proc.h. This avoids
having to manually maintain these prototypes across a random variety of
header files. It also automatically enforces a correct function
signature, and since there are warnings about missing prototypes, it
will detect functions that are defined but not registered in
pg_proc.h (or otherwise used).
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
|
|
|
|
We had thirty different GIN array opclasses sharing the same operators and
support functions. That still didn't cover all the built-in types, nor
did it cover arrays of extension-added types. What we want is a single
polymorphic opclass for "anyarray". There were two missing features needed
to make this possible:
1. We have to be able to declare the index storage type as ANYELEMENT
when the opclass is declared to index ANYARRAY. This just takes a few
more lines in index_create(). Although this currently seems of use only
for GIN, there's no reason to make index_create() restrict it to that.
2. We have to be able to identify the proper GIN compare function for
the index storage type. This patch proceeds by making the compare function
optional in GIN opclass definitions, and specifying that the default btree
comparison function for the index storage type will be looked up when the
opclass omits it. Again, that seems pretty generically useful.
Since the comparison function lookup is done in initGinState(), making
use of the second feature adds an additional cache lookup to GIN index
access setup. It seems unlikely that that would be very noticeable given
the other costs involved, but maybe at some point we should consider
making GinState data persist longer than it now does --- we could keep it
in the index relcache entry, perhaps.
Rather fortuitously, we don't seem to need to do anything to get this
change to play nice with dump/reload or pg_upgrade scenarios: the new
opclass definition is automatically selected to replace existing index
definitions, and the on-disk data remains compatible. Also, if a user has
created a custom opclass definition for a non-builtin type, this doesn't
break that, since CREATE INDEX will prefer an exact match to opcintype
over a match to ANYARRAY. However, if there's anyone out there with
handwritten DDL that explicitly specifies _bool_ops or one of the other
replaced opclass names, they'll need to adjust that.
Tom Lane, reviewed by Enrique Meneses
Discussion: <14436.1470940379@sss.pgh.pa.us>
|
|
computeLeafRecompressWALData() tried to produce a uint16 WAL log field by
memcpy'ing the first two bytes of an int-sized variable. That accidentally
works on little-endian hardware, but not at all on big-endian. Replay then
thinks it's looking at an ADDITEMS action with zero entries, and reads the
first two bytes of the first TID therein as the next segno/action,
typically leading to "unexpected GIN leaf action" errors during replay.
Even if replay failed to crash, the resulting GIN index page would surely
be incorrect. To fix, just declare the variable as uint16 instead.
Per bug #14295 from Spencer Thomason (much thanks to Spencer for turning
his problem into a self-contained test case). This likely also explains
a previous report of the same symptom from Bernd Helmle.
Back-patch to 9.4 where the problem was introduced (by commit 14d02f0bb).
Discussion: <20160826072658.15676.7628@wrigleys.postgresql.org>
Possible-Report: <2DA7350F7296B2A142272901@eje.land.credativ.lan>
|
|
While we don't need multiple iterators at the moment, the interface is
nicer and less dangerous this way.
Aleksander Alekseev, with some changes by me.
|
|
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
|
|
|
|
Per discussion, we should provide such functions to replace the lost
ability to discover AM properties by inspecting pg_am (cf commit
65c5fcd35). The added functionality is also meant to displace any code
that was looking directly at pg_index.indoption, since we'd rather not
believe that the bit meanings in that field are part of any client API
contract.
As future-proofing, define the SQL API to not assume that properties that
are currently AM-wide or index-wide will remain so unless they logically
must be; instead, expose them only when inquiring about a specific index
or even specific index column. Also provide the ability for an index
AM to override the behavior.
In passing, document pg_am.amtype, overlooked in commit 473b93287.
Andrew Gierth, with kibitzing by me and others
Discussion: <87mvl5on7n.fsf@news-spur.riddles.org.uk>
|
|
|
|
|
|
|
|
Use macroses for definition amstrategies/amsupport fields instead of
hardcoded values.
Author: Nikolay Shaplov with addition for contrib/bloom
|
|
Previously, ginInsertCleanup could exit early if it detects that someone else
is cleaning up the pending list, without waiting for that someone else to
finish the job. But in this case vacuum could miss tuples to be deleted.
Cleanup process now locks metapage with a help of heavyweight
LockPage(ExclusiveLock), and it guarantees that there is no another cleanup
process at the same time. Lock is taken differently depending on caller of
cleanup process: any vacuums and gin_clean_pending_list() will be blocked
until lock becomes available, ordinary insert uses conditional lock to
prevent indefinite waiting on lock.
Insert into pending list doesn't use this lock, so insertion isn't blocked.
Also, patch adds stopping of cleanup process when at-start-cleanup-tail is
reached in order to prevent infinite cleanup in case of massive insertion. But
it will stop only for automatic maintenance tasks like autovacuum.
Patch introduces choice of limit of memory to use: autovacuum_work_mem,
maintenance_work_mem or work_mem depending on call path.
Patch for previous releases should be reworked due to changes between 9.6 and
previous ones in this area.
Discover and diagnostics by Jeff Janes and Tomas Vondra
Patch by me with some ideas of Jeff Janes
|
|
Commit 36a35c550ac114ca turned the interface between ginPlaceToPage and
its subroutines in gindatapage.c and ginentrypage.c into a royal mess:
page-update critical sections were started in one place and finished in
another place not even in the same file, and the very same subroutine
might return having started a critical section or not. Subsequent patches
band-aided over some of the problems with this design by making things
even messier.
One user-visible resulting problem is memory leaks caused by the need for
the subroutines to allocate storage that would survive until ginPlaceToPage
calls XLogInsert (as reported by Julien Rouhaud). This would not typically
be noticeable during retail index updates. It could be visible in a GIN
index build, in the form of memory consumption swelling to several times
the commanded maintenance_work_mem.
Another rather nasty problem is that in the internal-page-splitting code
path, we would clear the child page's GIN_INCOMPLETE_SPLIT flag well before
entering the critical section that it's supposed to be cleared in; a
failure in between would leave the index in a corrupt state. There were
also assorted coding-rule violations with little immediate consequence but
possible long-term hazards, such as beginning an XLogInsert sequence before
entering a critical section, or calling elog(DEBUG) inside a critical
section.
To fix, redefine the API between ginPlaceToPage() and its subroutines
by splitting the subroutines into two parts. The "beginPlaceToPage"
subroutine does what can be done outside a critical section, including
full computation of the result pages into temporary storage when we're
going to split the target page. The "execPlaceToPage" subroutine is called
within a critical section established by ginPlaceToPage(), and it handles
the actual page update in the non-split code path. The critical section,
as well as the XLOG insertion call sequence, are both now always started
and finished in ginPlaceToPage(). Also, make ginPlaceToPage() create and
work in a short-lived memory context to eliminate the leakage problem.
(Since a short-lived memory context had been getting created in the most
common code path in the subroutines, this shouldn't cause any noticeable
performance penalty; we're just moving the overhead up one call level.)
In passing, fix a bunch of comments that had gone unmaintained throughout
all this klugery.
Report: <571276DD.5050303@dalibo.com>
|
|
The reverted changes were intended to force a choice of whether any
newly-added BufferGetPage() calls needed to be accompanied by a
test of the snapshot age, to support the "snapshot too old"
feature. Such an accompanying test is needed in about 7% of the
cases, where the page is being used as part of a scan rather than
positioning for other purposes (such as DML or vacuuming). The
additional effort required for back-patching, and the doubt whether
the intended benefit would really be there, have indicated it is
best just to rely on developers to do the right thing based on
comments and existing usage, as we do with many other conventions.
This change should have little or no effect on generated executable
code.
Motivated by the back-patching pain of Tom Lane and Robert Haas
|
|
The code had a query-lifespan memory leak when encountering GIN entries
that have posting lists (rather than posting trees, ie, there are a
relatively small number of heap tuples containing this index key value).
With a suitable data distribution this could add up to a lot of leakage.
Problem seems to have been introduced by commit 36a35c550, so back-patch
to 9.4.
Julien Rouhaud
|
|
This feature is controlled by a new old_snapshot_threshold GUC. A
value of -1 disables the feature, and that is the default. The
value of 0 is just intended for testing. Above that it is the
number of minutes a snapshot can reach before pruning and vacuum
are allowed to remove dead tuples which the snapshot would
otherwise protect. The xmin associated with a transaction ID does
still protect dead tuples. A connection which is using an "old"
snapshot does not get an error unless it accesses a page modified
recently enough that it might not be able to produce accurate
results.
This is similar to the Oracle feature, and we use the same SQLSTATE
and error message for compatibility.
|
|
This patch is a no-op patch which is intended to reduce the chances
of failures of omission once the functional part of the "snapshot
too old" patch goes in. It adds parameters for snapshot, relation,
and an enum to specify whether the snapshot age check needs to be
done for the page at this point. This initial patch passes NULL
for the first two new parameters and BGP_NO_SNAPSHOT_TEST for the
third. The follow-on patch will change the places where the test
needs to be made.
|
|
It's not ready yet, revert two commits
690c543550b0d2852060c18d270cdb534d339d9a - unstable test output
386e3d7609c49505e079c40c65919d99feb82505 - patch itself
|
|
Now indexes (but only B-tree for now) can contain "extra" column(s) which
doesn't participate in index structure, they are just stored in leaf
tuples. It allows to use index only scan by using single index instead
of two or more indexes.
Author: Anastasia Lubennikova with minor editorializing by me
Reviewers: David Rowley, Peter Geoghegan, Jeff Janes
|
|
Commit d88976cfa1302e8d removed this code from ginFreeScanKeys():
- if (entry->list)
- pfree(entry->list);
evidently in the belief that that ItemPointer array is allocated in the
keyCtx and so would be reclaimed by the following MemoryContextReset.
Unfortunately, it isn't and it won't. It'd likely be a good idea for
that to become so, but as a simple and back-patchable fix in the
meantime, restore this code to ginFreeScanKeys().
Also, add a similar pfree to where startScanEntry() is about to zero out
entry->list. I am not sure if there are any code paths where this
change prevents a leak today, but it seems like cheap future-proofing.
In passing, make the initial allocation of so->entries[] use palloc
not palloc0. The code doesn't depend on unused entries being zero;
if it did, the array-enlargement code in ginFillScanEntry() would be
wrong. So using palloc0 initially can only serve to confuse readers
about what the invariant is.
Per report from Felipe de Jesús Molina Bravo, via Jaime Casanova in
<CAJGNTeMR1ndMU2Thpr8GPDUfiHTV7idELJRFusA5UXUGY1y-eA@mail.gmail.com>
|
|
|
|
This function cleans up the pending list of the GIN index by
moving entries in it to the main GIN data structure in bulk.
It returns the number of pages cleaned up from the pending list.
This function is useful, for example, when the pending list
needs to be cleaned up *quickly* to improve the performance of
the search using GIN index. VACUUM can do the same thing, too,
but it may take days to run on a large table.
Jeff Janes,
reviewed by Julien Rouhaud, Jaime Casanova, Alvaro Herrera and me.
Discussion: CAMkU=1x8zFkpfnozXyt40zmR3Ub_kHu58LtRmwHUKRgQss7=iQ@mail.gmail.com
|
|
Given the limited range of i, these shifts should not cause any
problem, but that apparently doesn't stop some compilers from
whining about them.
David Rowley
|
|
The amvalidate functions added in commit 65c5fcd353a859da were on the
crude side. Improve them in a few ways:
* Perform signature checking for operators and support functions.
* Apply more thorough checks for missing operators and functions,
where possible.
* Instead of reporting problems as ERRORs, report most problems as INFO
messages and make the amvalidate function return FALSE. This allows
more than one problem to be discovered per run.
* Report object names rather than OIDs, and work a bit harder on making
the messages understandable.
Also, remove a few more opr_sanity regression test queries that are
now superseded by the amvalidate checks.
|
|
It's an oversight in commit dc943ad.
|
|
This patch reduces pg_am to just two columns, a name and a handler
function. All the data formerly obtained from pg_am is now provided
in a C struct returned by the handler function. This is similar to
the designs we've adopted for FDWs and tablesample methods. There
are multiple advantages. For one, the index AM's support functions
are now simple C functions, making them faster to call and much less
error-prone, since the C compiler can now check function signatures.
For another, this will make it far more practical to define index access
methods in installable extensions.
A disadvantage is that SQL-level code can no longer see attributes
of index AMs; in particular, some of the crosschecks in the opr_sanity
regression test are no longer possible from SQL. We've addressed that
by adding a facility for the index AM to perform such checks instead.
(Much more could be done in that line, but for now we're content if the
amvalidate functions more or less replace what opr_sanity used to do.)
We might also want to expose some sort of reporting functionality, but
this patch doesn't do that.
Alexander Korotkov, reviewed by Petr Jelínek, and rather heavily
editorialized on by me.
|
|
Backpatch certain files through 9.1
|
|
Commit e95680832854cf300e64c10de9cc2f586df558e8 introduces adding pages
to FSM for ordinary insert, but autoanalyze was able just cleanup
pending list without adding to FSM.
Also fix double call of IndexFreeSpaceMapVacuum() during ginvacuumcleanup()
Report from Fujii Masao
Patch by me
Review by Jeff Janes
|
|
Cleanup process could be called by ordinary insert/update and could take a lot
of time. Add vacuum_delay_point() to make this process interruptable. Under
vacuum this call will also throttle a vacuum process to decrease system load,
called from insert/update it will not throttle, and that reduces a latency.
Backpatch for all supported branches.
Jeff Janes <jeff.janes@gmail.com>
|
|
Add pages deleted from GIN's pending list during cleanup to free space map
immediately. Clean up process could be initiated by ordinary insert but adding
page to FSM might occur only at vacuum. On some workload like never-vacuumed
insert-only tables it could cause a huge bloat.
Jeff Janes <jeff.janes@gmail.com>
|
|
Oskari Saarenmaa. Backpatch to stable branches where applicable.
|
