| Age | Commit message (Collapse) | Author |
|---|
|
Japin Li
Reviewed by Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/MEYP282MB1669459813B36FB5EAA38434B6499@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
|
|
The use of "we" when referring to the active backend might be
misunderstood, so rephrase to make it clearer who is performing
the actions discussed in the comment.
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Erikjan Rijkers <er@xs4all.nl>
Reviewed-by: Robert Treat <rob@xzilla.net>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAEG8a3LRSMqkvjiURiJoSi4aGWORpiXUmUfQQK5PaD6WfPzu3w@mail.gmail.com
|
|
We have a few commands that "can't run in a transaction block",
meaning that if they complete their processing but then we fail
to COMMIT, we'll be left with inconsistent on-disk state.
However, the existing defenses for this are only watertight for
simple query protocol. In extended protocol, we didn't commit
until receiving a Sync message. Since the client is allowed to
issue another command instead of Sync, we're in trouble if that
command fails or is an explicit ROLLBACK. In any case, sitting
in an inconsistent state while waiting for a client message
that might not come seems pretty risky.
This case wasn't reachable via libpq before we introduced pipeline
mode, but it's always been an intended aspect of extended query
protocol, and likely there are other clients that could reach it
before.
To fix, set a flag in PreventInTransactionBlock that tells
exec_execute_message to force an immediate commit. This seems
to be the approach that does least damage to existing working
cases while still preventing the undesirable outcomes.
While here, add some documentation to protocol.sgml that explicitly
says how to use pipelining. That's latent in the existing docs if
you know what to look for, but it's better to spell it out; and it
provides a place to document this new behavior.
Per bug #17434 from Yugo Nagata. It's been wrong for ages,
so back-patch to all supported branches.
Discussion: https://postgr.es/m/17434-d9f7a064ce2a88a3@postgresql.org
|
|
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
|
|
pgperltidy and reformat-dat-files too. Not many changes.
|
|
Noticed when comparing the set of exported symbols without / with
-fvisibility=hidden after adding PGDLLIMPORT to intentionally exported
symbols.
Discussion: https://postgr.es/m/20220512164513.vaheofqp2q24l65r@alap3.anarazel.de
|
|
Before commit 412ad7a55639516f284cd0ef9757d6ae5c7abd43, delayChkpt
was a Boolean. Now it's an integer. Extensions using it need to be
appropriately updated, so let's rename the field to make sure that
a hard compilation failure occurs.
Replacing delayChkpt with delayChkptFlags made a few comments extend
past 80 characters, so I reflowed them and changed some wording very
slightly.
The back-branches will need a different change to restore compatibility
with existing minor releases; this is just for master.
Per suggestion from Tom Lane.
Discussion: http://postgr.es/m/a7880f4d-1d74-582a-ada7-dad168d046d1@enterprisedb.com
|
|
One problematic part of the current statistics collector design is that there
is no reliable way of getting rid of statistics entries. Because of that
pgstat_vacuum_stat() (called by [auto-]vacuum) matches all stats for the
current database with the catalog contents and tries to drop now-superfluous
entries. That's quite expensive. What's worse, it doesn't work on physical
replicas, despite physical replicas collection statistics entries.
This commit introduces infrastructure to create / drop statistics entries
transactionally, together with the underlying catalog objects (functions,
relations, subscriptions). pgstat_xact.c maintains a list of stats entries
created / dropped transactionally in the current transaction. To ensure the
removal of statistics entries is durable dropped statistics entries are
included in commit / abort (and prepare) records, which also ensures that
stats entries are dropped on standbys.
Statistics entries created separately from creating the underlying catalog
object (e.g. when stats were previously lost due to an immediate restart)
are *not* WAL logged. However that can only happen outside of the transaction
creating the catalog object, so it does not lead to "leaked" statistics
entries.
For this to work, functions creating / dropping functions / relations /
subscriptions need to call into pgstat. For subscriptions this was already
done when dropping subscriptions, via pgstat_report_subscription_drop() (now
renamed to pgstat_drop_subscription()).
This commit does not actually drop stats yet, it just provides the
infrastructure. It is however a largely independent piece of infrastructure,
so committing it separately makes sense.
Bumps XLOG_PAGE_MAGIC.
Author: Andres Freund <andres@anarazel.de>
Reviewed-By: Thomas Munro <thomas.munro@gmail.com>
Reviewed-By: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/20220303021600.hs34ghqcw6zcokdh@alap3.anarazel.de
|
|
If TRUNCATE causes some buffers to be invalidated and thus the
checkpoint does not flush them, TRUNCATE must also ensure that the
corresponding files are truncated on disk. Otherwise, a replay
from the checkpoint might find that the buffers exist but have
the wrong contents, which may cause replay to fail.
Report by Teja Mupparti. Patch by Kyotaro Horiguchi, per a design
suggestion from Heikki Linnakangas, with some changes to the
comments by me. Review of this and a prior patch that approached
the issue differently by Heikki Linnakangas, Andres Freund, Álvaro
Herrera, Masahiko Sawada, and Tom Lane.
Discussion: http://postgr.es/m/BYAPR06MB6373BF50B469CA393C614257ABF00@BYAPR06MB6373.namprd06.prod.outlook.com
|
|
Most of these are cases where we could call memcpy() or other libc
functions with a NULL pointer and a zero count, which is forbidden
by POSIX even though every production version of libc allows it.
We've fixed such things before in a piecemeal way, but apparently
never made an effort to try to get them all. I don't claim that
this patch does so either, but it gets every failure I observe in
check-world, using clang 12.0.1 on current RHEL8.
numeric.c has a different issue that the sanitizer doesn't like:
"ln(-1.0)" will compute log10(0) and then try to assign the
resulting -Inf to an integer variable. We don't actually use the
result in such a case, so there's no live bug.
Back-patch to all supported branches, with the idea that we might
start running a buildfarm member that tests this case. This includes
back-patching c1132aae3 (Check the size in COPY_POINTER_FIELD),
which previously silenced some of these issues in copyfuncs.c.
Discussion: https://postgr.es/m/CALNJ-vT9r0DSsAOw9OXVJFxLENoVS_68kJ5x0p44atoYH+H4dg@mail.gmail.com
|
|
This is pretty queasy-making on general principles, and the more so
once you notice that CommitTransactionCommand() is actually stomping
on the values saved by _SPI_commit(). It's okay as long as the
active values didn't change during HoldPinnedPortals(); but that's
a larger assumption than I think we want to make, especially since
the fix is so simple.
Discussion: https://postgr.es/m/1533956.1645731245@sss.pgh.pa.us
|
|
This moves the functions related to performing WAL recovery into the new
xlogrecovery.c source file, leaving xlog.c responsible for maintaining
the WAL buffers, coordinating the startup and switch from recovery to
normal operations, and other miscellaneous stuff that have always been in
xlog.c.
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Robert Haas
Discussion: https://www.postgresql.org/message-id/a31f27b4-a31d-f976-6217-2b03be646ffa%40iki.fi
|
|
Backpatch-through: 10
|
|
Standardize on xoroshiro128** as our basic PRNG algorithm, eliminating
a bunch of platform dependencies as well as fundamentally-obsolete PRNG
code. In addition, this API replacement will ease replacing the
algorithm again in future, should that become necessary.
xoroshiro128** is a few percent slower than the drand48 family,
but it can produce full-width 64-bit random values not only 48-bit,
and it should be much more trustworthy. It's likely to be noticeably
faster than the platform's random(), depending on which platform you
are thinking about; and we can have non-global state vectors easily,
unlike with random(). It is not cryptographically strong, but neither
are the functions it replaces.
Fabien Coelho, reviewed by Dean Rasheed, Aleksander Alekseev, and myself
Discussion: https://postgr.es/m/alpine.DEB.2.22.394.2105241211230.165418@pseudo
|
|
Commit 0bead9af484c introduced XLOG_INCLUDE_XID flag to indicate that the
WAL record contains subXID-to-topXID association. It uses that flag later
to mark in CurrentTransactionState that top-xid is logged so that we
should not try to log it again with the next WAL record in the current
subtransaction. However, we can use a localized variable to pass that
information.
In passing, change the related function and variable names to make them
consistent with what the code is actually doing.
Author: Dilip Kumar
Reviewed-by: Alvaro Herrera, Amit Kapila
Discussion: https://postgr.es/m/E1mSoYz-0007Fh-D9@gemulon.postgresql.org
|
|
The purpose of commit 8a54e12a38d1545d249f1402f66c8cde2837d97c was to
fix this, and it sufficed when the PREPARE TRANSACTION completed before
the CIC looked for lock conflicts. Otherwise, things still broke. As
before, in a cluster having used CIC while having enabled prepared
transactions, queries that use the resulting index can silently fail to
find rows. It may be necessary to reindex to recover from past
occurrences; REINDEX CONCURRENTLY suffices. Fix this for future index
builds by making CIC wait for arbitrarily-recent prepared transactions
and for ordinary transactions that may yet PREPARE TRANSACTION. As part
of that, have PREPARE TRANSACTION transfer locks to its dummy PGPROC
before it calls ProcArrayClearTransaction(). Back-patch to 9.6 (all
supported versions).
Andrey Borodin, reviewed (in earlier versions) by Andres Freund.
Discussion: https://postgr.es/m/01824242-AA92-4FE9-9BA7-AEBAFFEA3D0C@yandex-team.ru
|
|
During a replication slot creation, an ERROR generated in the same
transaction as the one creating a to-be-exported snapshot would have
left the backend in an inconsistent state, as the associated static
export snapshot state was not being reset on transaction abort, but only
on the follow-up command received by the WAL sender that created this
snapshot on replication slot creation. This would trigger inconsistency
failures if this session tried to export again a snapshot, like during
the creation of a replication slot.
Note that a snapshot export cannot happen in a transaction block, so
there is no need to worry resetting this state for subtransaction
aborts. Also, this inconsistent state would very unlikely show up to
users. For example, one case where this could happen is an
out-of-memory error when building the initial snapshot to-be-exported.
Dilip found this problem while poking at a different patch, that caused
an error in this code path for reasons unrelated to HEAD.
Author: Dilip Kumar
Reviewed-by: Michael Paquier, Zhihong Yu
Discussion: https://postgr.es/m/CAFiTN-s0zA1Kj0ozGHwkYkHwa5U0zUE94RSc_g81WrpcETB5=w@mail.gmail.com
Backpatch-through: 9.6
|
|
Commit 84f5c2908 forgot to consider the possibility that
EnsurePortalSnapshotExists could run inside a subtransaction with
lifespan shorter than the Portal's. In that case, the new active
snapshot would be popped at the end of the subtransaction, leaving
a dangling pointer in the Portal, with mayhem ensuing.
To fix, make sure the ActiveSnapshot stack entry is marked with
the same subtransaction nesting level as the associated Portal.
It's certainly safe to do so since we won't be here at all unless
the stack is empty; hence we can't create an out-of-order stack.
Let's also apply this logic in the case where PortalRunUtility
sets portalSnapshot, just to be sure that path can't cause similar
problems. It's slightly less clear that that path can't create
an out-of-order stack, so add an assertion guarding it.
Report and patch by Bertrand Drouvot (with kibitzing by me).
Back-patch to v11, like the previous commit.
Discussion: https://postgr.es/m/ff82b8c5-77f4-3fe7-6028-fcf3303e82dd@amazon.com
|
|
Formerly, we sent signals for outgoing NOTIFY messages within
ProcessCompletedNotifies, which was also responsible for sending
relevant ones of those messages to our connected client. It therefore
had to run during the main-loop processing that occurs just before
going idle. This arrangement had two big disadvantages:
* Now that procedures allow intra-command COMMITs, it would be
useful to send NOTIFYs to other sessions immediately at COMMIT
(though, for reasons of wire-protocol stability, we still shouldn't
forward them to our client until end of command).
* Background processes such as replication workers would not send
NOTIFYs at all, since they never execute the client communication
loop. We've had requests to allow triggers running in replication
workers to send NOTIFYs, so that's a problem.
To fix these things, move transmission of outgoing NOTIFY signals
into AtCommit_Notify, where it will happen during CommitTransaction.
Also move the possible call of asyncQueueAdvanceTail there, to
ensure we don't bloat the async SLRU if a background worker sends
many NOTIFYs with no one listening.
We can also drop the call of asyncQueueReadAllNotifications,
allowing ProcessCompletedNotifies to go away entirely. That's
because commit 790026972 added a call of ProcessNotifyInterrupt
adjacent to PostgresMain's call of ProcessCompletedNotifies,
and that does its own call of asyncQueueReadAllNotifications,
meaning that we were uselessly doing two such calls (inside two
separate transactions) whenever inbound notify signals coincided
with an outbound notify. We need only set notifyInterruptPending
to ensure that ProcessNotifyInterrupt runs, and we're done.
The existing documentation suggests that custom background workers
should call ProcessCompletedNotifies if they want to send NOTIFY
messages. To avoid an ABI break in the back branches, reduce it
to an empty routine rather than removing it entirely. Removal
will occur in v15.
Although the problems mentioned above have existed for awhile,
I don't feel comfortable back-patching this any further than v13.
There was quite a bit of churn in adjacent code between 12 and 13.
At minimum we'd have to also backpatch 51004c717, and a good deal
of other adjustment would also be needed, so the benefit-to-risk
ratio doesn't look attractive.
Per bug #15293 from Michael Powers (and similar gripes from others).
Artur Zakirov and Tom Lane
Discussion: https://postgr.es/m/153243441449.1404.2274116228506175596@wrigleys.postgresql.org
|
|
If a file is truncated, we must update minRecoveryPoint. Once a file is
truncated, there's no going back; it would not be safe to stop recovery
at a point earlier than that anymore.
Commit 7bffc9b7bf changed xact_redo_commit() so that it updates
minRecoveryPoint on truncation, but forgot to change xact_redo_abort().
Back-patch to all supported versions.
Reported-by: mengjuan.cmj@alibaba-inc.com
Author: Fujii Masao
Reviewed-by: Heikki Linnakangas
Discussion: https://postgr.es/m/b029fce3-4fac-4265-968e-16f36ff4d075.mengjuan.cmj@alibaba-inc.com
|
|
Commit 438fc4a39c prevented the WAL replay from writing
COMMIT_TS_SETTS record. By this change there is no code that
generates COMMIT_TS_SETTS record in PostgreSQL core.
Also we can think that there are no extensions using the record
because we've not received so far any complaints about the issue
that commit 438fc4a39c fixed. Therefore this commit removes
COMMIT_TS_SETTS record and its related code. Even without
this record, the timestamp required for commit timestamp feature
can be acquired from the COMMIT record.
Bump WAL page magic.
Reported-by: lx zou <zoulx1982@163.com>
Author: Fujii Masao
Reviewed-by: Alvaro Herrera
Discussion: https://postgr.es/m/16931-620d0f2fdc6108f1@postgresql.org
|
|
To allow inserts in parallel-mode this feature has to ensure that all the
constraints, triggers, etc. are parallel-safe for the partition hierarchy
which is costly and we need to find a better way to do that. Additionally,
we could have used existing cached information in some cases like indexes,
domains, etc. to determine the parallel-safety.
List of commits reverted, in reverse chronological order:
ed62d3737c Doc: Update description for parallel insert reloption.
c8f78b6161 Add a new GUC and a reloption to enable inserts in parallel-mode.
c5be48f092 Improve FK trigger parallel-safety check added by 05c8482f7f.
e2cda3c20a Fix use of relcache TriggerDesc field introduced by commit 05c8482f7f.
e4e87a32cc Fix valgrind issue in commit 05c8482f7f.
05c8482f7f Enable parallel SELECT for "INSERT INTO ... SELECT ...".
Discussion: https://postgr.es/m/E1lMiB9-0001c3-SY@gemulon.postgresql.org
|
|
Parallel SELECT can't be utilized for INSERT in the following cases:
- INSERT statement uses the ON CONFLICT DO UPDATE clause
- Target table has a parallel-unsafe: trigger, index expression or
predicate, column default expression or check constraint
- Target table has a parallel-unsafe domain constraint on any column
- Target table is a partitioned table with a parallel-unsafe partition key
expression or support function
The planner is updated to perform additional parallel-safety checks for
the cases listed above, for determining whether it is safe to run INSERT
in parallel-mode with an underlying parallel SELECT. The planner will
consider using parallel SELECT for "INSERT INTO ... SELECT ...", provided
nothing unsafe is found from the additional parallel-safety checks, or
from the existing parallel-safety checks for SELECT.
While checking parallel-safety, we need to check it for all the partitions
on the table which can be costly especially when we decide not to use a
parallel plan. So, in a separate patch, we will introduce a GUC and or a
reloption to enable/disable parallelism for Insert statements.
Prior to entering parallel-mode for the execution of INSERT with parallel
SELECT, a TransactionId is acquired and assigned to the current
transaction state. This is necessary to prevent the INSERT from attempting
to assign the TransactionId whilst in parallel-mode, which is not allowed.
This approach has a disadvantage in that if the underlying SELECT does not
return any rows, then the TransactionId is not used, however that
shouldn't happen in practice in many cases.
Author: Greg Nancarrow, Amit Langote, Amit Kapila
Reviewed-by: Amit Langote, Hou Zhijie, Takayuki Tsunakawa, Antonin Houska, Bharath Rupireddy, Dilip Kumar, Vignesh C, Zhihong Yu, Amit Kapila
Tested-by: Tang, Haiying
Discussion: https://postgr.es/m/CAJcOf-cXnB5cnMKqWEp2E2z7Mvcd04iLVmV=qpFJrR3AcrTS3g@mail.gmail.com
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
|
|
Commit 1eb6d6527a allowed to track replica origin replay progress for 2PC
but it was not complete. It misses to properly track the progress for
rollback prepared especially it missed updating the code for recovery.
Additionally, we need to allow tracking it on subscriber nodes where
wal_level might not be logical.
It is required to track decoding of 2PC which is committed in PG14
(a271a1b50e) and also nobody complained about this till now so not
backpatching it.
Author: Amit Kapila
Reviewed-by: Michael Paquier and Ajin Cherian
Discussion: https://postgr.es/m/CAA4eK1L-kHmMnSdrRW6UhRbCjR7cgh04c+6psY15qzT6ktcd+g@mail.gmail.com
|
|
This commit fixes COMMIT AND CHAIN command so that it starts new transaction
immediately even if savepoints are defined within the transaction to commit.
Previously COMMIT AND CHAIN command did not in that case because
commit 280a408b48 forgot to make CommitTransactionCommand() handle
a transaction chaining when the transaction state was TBLOCK_SUBCOMMIT.
Also this commit adds the regression test for COMMIT AND CHAIN command
when savepoints are defined.
Back-patch to v12 where transaction chaining was added.
Reported-by: Arthur Nascimento
Author: Fujii Masao
Reviewed-by: Arthur Nascimento, Vik Fearing
Discussion: https://postgr.es/m/16867-3475744069228158@postgresql.org
|
|
The new name conveys the effect better, is more consistent with similar
functions ReadNextMultiXactId(), ReadNextFullTransactionId(), and
matches the name of the variable that it reads.
Reported-by: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzmVR4SakBXQUdhhPpMf1aYvZCnna5%3DHKa7DAgEmBAg%2B8g%40mail.gmail.com
|
|
For the initial table data synchronization in logical replication, we use
a single transaction to copy the entire table and then synchronize the
position in the stream with the main apply worker.
There are multiple downsides of this approach: (a) We have to perform the
entire copy operation again if there is any error (network breakdown,
error in the database operation, etc.) while we synchronize the WAL
position between tablesync worker and apply worker; this will be onerous
especially for large copies, (b) Using a single transaction in the
synchronization-phase (where we can receive WAL from multiple
transactions) will have the risk of exceeding the CID limit, (c) The slot
will hold the WAL till the entire sync is complete because we never commit
till the end.
This patch solves all the above downsides by allowing multiple
transactions during the tablesync phase. The initial copy is done in a
single transaction and after that, we commit each transaction as we
receive. To allow recovery after any error or crash, we use a permanent
slot and origin to track the progress. The slot and origin will be removed
once we finish the synchronization of the table. We also remove slot and
origin of tablesync workers if the user performs DROP SUBSCRIPTION .. or
ALTER SUBSCRIPTION .. REFERESH and some of the table syncs are still not
finished.
The commands ALTER SUBSCRIPTION ... REFRESH PUBLICATION and
ALTER SUBSCRIPTION ... SET PUBLICATION ... with refresh option as true
cannot be executed inside a transaction block because they can now drop
the slots for which we have no provision to rollback.
This will also open up the path for logical replication of 2PC
transactions on the subscriber side. Previously, we can't do that because
of the requirement of maintaining a single transaction in tablesync
workers.
Bump catalog version due to change of state in the catalog
(pg_subscription_rel).
Author: Peter Smith, Amit Kapila, and Takamichi Osumi
Reviewed-by: Ajin Cherian, Petr Jelinek, Hou Zhijie and Amit Kapila
Discussion: https://postgr.es/m/CAA4eK1KHJxaZS-fod-0fey=0tq3=Gkn4ho=8N4-5HWiCfu0H1A@mail.gmail.com
|
|
Backpatch-through: 9.5
|
|
While ereport() and elog() themselves are quite cheap when the
error message level is too low to be printed, some places need to do
substantial work before they can call those macros at all. To allow
optimizing away such setup work when nothing is to be printed, make
elog.c export a new function message_level_is_interesting(elevel)
that reports whether ereport/elog will do anything. Make use of that
in various places that had ad-hoc direct tests of log_min_messages etc.
Also teach ProcSleep to use it to avoid some work. (There may well
be other places that could usefully use this; I didn't search hard.)
Within elog.c, refactor a little bit to avoid having duplicate copies
of the policy-setting logic. When that code was written, we weren't
relying on the availability of inline functions; so it had some
duplications in the name of efficiency, which I got rid of.
Alvaro Herrera and Tom Lane
Discussion: https://postgr.es/m/129515.1606166429@sss.pgh.pa.us
|
|
Specifically, this blocks DECLARE ... WITH HOLD and firing of deferred
triggers within index expressions and materialized view queries. An
attacker having permission to create non-temp objects in at least one
schema could execute arbitrary SQL functions under the identity of the
bootstrap superuser. One can work around the vulnerability by disabling
autovacuum and not manually running ANALYZE, CLUSTER, REINDEX, CREATE
INDEX, VACUUM FULL, or REFRESH MATERIALIZED VIEW. (Don't restore from
pg_dump, since it runs some of those commands.) Plain VACUUM (without
FULL) is safe, and all commands are fine when a trusted user owns the
target object. Performance may degrade quickly under this workaround,
however. Back-patch to 9.5 (all supported versions).
Reviewed by Robert Haas. Reported by Etienne Stalmans.
Security: CVE-2020-25695
|
|
If a commit or abort record includes "dropped relfilenodes", then replaying
the record will remove data files. That is surely a "special rel update",
but the records were not marked as such. Fix that, teach pg_rewind to
expect and ignore them, and add a test case to cover it.
It's always been like this, but no backporting for fear of breaking
existing applications. If an application parsed the WAL but was not
handling commit/abort records, it would stop working. That might be a good
thing if it really needed to handle the dropped rels, but it will be caught
when the application is updated to work with PostgreSQL v14 anyway.
Discussion: https://www.postgresql.org/message-id/07b33e2c-46a6-86a1-5f9e-a7da73fddb95%40iki.fi
Reviewed-by: Amit Kapila, Michael Paquier
|
|
Including Full in variable names duplicates the type information and
leads to overly long names. As FullTransactionId cannot accidentally
be casted to TransactionId that does not seem necessary.
Author: Andres Freund
Discussion: https://postgr.es/m/20200724011143.jccsyvsvymuiqfxu@alap3.anarazel.de
|
|
Instead of serializing the transaction to disk after reaching the
logical_decoding_work_mem limit in memory, we consume the changes we have
in memory and invoke stream API methods added by commit 45fdc9738b.
However, sometimes if we have incomplete toast or speculative insert we
spill to the disk because we can't generate the complete tuple and stream.
And, as soon as we get the complete tuple we stream the transaction
including the serialized changes.
We can do this incremental processing thanks to having assignments
(associating subxact with toplevel xacts) in WAL right away, and
thanks to logging the invalidation messages at each command end. These
features are added by commits 0bead9af48 and c55040ccd0 respectively.
Now that we can stream in-progress transactions, the concurrent aborts
may cause failures when the output plugin consults catalogs (both system
and user-defined).
We handle such failures by returning ERRCODE_TRANSACTION_ROLLBACK
sqlerrcode from system table scan APIs to the backend or WALSender
decoding a specific uncommitted transaction. The decoding logic on the
receipt of such a sqlerrcode aborts the decoding of the current
transaction and continue with the decoding of other transactions.
We have ReorderBufferTXN pointer in each ReorderBufferChange by which we
know which xact it belongs to. The output plugin can use this to decide
which changes to discard in case of stream_abort_cb (e.g. when a subxact
gets discarded).
We also provide a new option via SQL APIs to fetch the changes being
streamed.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila, Nikhil Sontakke
Reviewed-by: Amit Kapila, Kuntal Ghosh, Ajin Cherian
Tested-by: Neha Sharma, Mahendra Singh Thalor and Ajin Cherian
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
|
|
When wal_level=logical, write invalidations at command end into WAL so
that decoding can use this information.
This patch is required to allow the streaming of in-progress transactions
in logical decoding. The actual work to allow streaming will be committed
as a separate patch.
We still add the invalidations to the cache and write them to WAL at
commit time in RecordTransactionCommit(). This uses the existing
XLOG_INVALIDATIONS xlog record type, from the RM_STANDBY_ID resource
manager (see LogStandbyInvalidations for details).
So existing code relying on those invalidations (e.g. redo) does not need
to be changed.
The invalidations written at command end uses a new xlog record type
XLOG_XACT_INVALIDATIONS, from RM_XACT_ID resource manager. See
LogLogicalInvalidations for details.
These new xlog records are ignored by existing redo procedures, which
still rely on the invalidations written to commit records.
The invalidations are decoded and accumulated in top-transaction, and then
executed during replay. This obviates the need to decode the
invalidations as part of a commit record.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_XACT_INVALIDATIONS.
Author: Dilip Kumar, Tomas Vondra, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
|
|
The logical decoding infrastructure needs to know which top-level
transaction the subxact belongs to, in order to decode all the
changes. Until now that might be delayed until commit, due to the
caching (GPROC_MAX_CACHED_SUBXIDS), preventing features requiring
incremental decoding.
So we also write the assignment info into WAL immediately, as part
of the next WAL record (to minimize overhead) only when wal_level=logical.
We can not remove the existing XLOG_XACT_ASSIGNMENT WAL as that is
required for avoiding overflow in the hot standby snapshot.
Bump XLOG_PAGE_MAGIC, since this introduces XLR_BLOCK_ID_TOPLEVEL_XID.
Author: Tomas Vondra, Dilip Kumar, Amit Kapila
Reviewed-by: Amit Kapila
Tested-by: Neha Sharma and Mahendra Singh Thalor
Discussion: https://postgr.es/m/688b0b7f-2f6c-d827-c27b-216a8e3ea700@2ndquadrant.com
|
|
Leader already is the more widely used terminology, but a few places
didn't get the message.
Author: Andres Freund
Reviewed-By: David Steele
Discussion: https://postgr.es/m/20200615182235.x7lch5n6kcjq4aue@alap3.anarazel.de
|
|
The function has been reading global variable forceSyncCommit, mirroring
the intent of the caller that passed forceSync=forceSyncCommit. The
other caller, RecordTransactionCommitPrepared(), passed false. Since
COMMIT PREPARED can't share a transaction with any command, it certainly
doesn't share a transaction with a command that sets forceSyncCommit.
Reviewed by Michael Paquier.
Discussion: https://postgr.es/m/20200617032615.GC2916904@rfd.leadboat.com
|
|
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
|
|
index.c supposed that it could just use a PG_TRY block to clean up the
state associated with an active REINDEX operation. However, that code
doesn't run if we do a FATAL exit --- for example, due to a SIGTERM
shutdown signal --- while the REINDEX is happening. And that state does
get consulted during catalog accesses, which makes it problematic if we
do any catalog accesses during shutdown --- for example, to clean up any
temp tables created in the session.
If this combination of circumstances occurred, we could find ourselves
trying to access already-freed memory. In debug builds that'd fairly
reliably cause an assertion failure. In production we might often
get away with it, but with some bad luck it could cause a core dump.
Another possible bad outcome is an erroneous conclusion that an
index-to-be-accessed is being reindexed; but it looks like that would
be unlikely to have any consequences worse than failing to drop temp
tables right away. (They'd still get dropped by the next session that
uses that temp schema.)
To fix, get rid of the use of PG_TRY here, and instead hook into
the transaction abort mechanisms to clean up reindex state.
Per bug #16378 from Alexander Lakhin. This has been wrong for a
very long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/16378-7a70ca41b3ec2009@postgresql.org
|
|
The goal of separating hotly accessed per-backend data from PGPROC
into PGXACT is to make accesses fast (GetSnapshotData() in
particular). But delayChkpt is not actually accessed frequently; only
when starting a checkpoint. As it is frequently modified (multiple
times in the course of a single transaction), storing it in the same
cacheline as hotly accessed data unnecessarily dirties a contended
cacheline.
Therefore move delayChkpt to PGPROC.
This is part of a larger series of patches intending to improve
GetSnapshotData() scalability. It is committed and pushed separately,
as it is independently beneficial (small but measurable win, limited
by the other frequent modifications of PGXACT).
Author: Andres Freund
Reviewed-By: Robert Haas, Thomas Munro, David Rowley
Discussion: https://postgr.es/m/20200301083601.ews6hz5dduc3w2se@alap3.anarazel.de
|
|
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Bump XLOG_PAGE_MAGIC, since this introduces XLOG_GIST_ASSIGN_LSN.
Future servers accept older WAL, so this bump is discretionary.
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
|
|
This reverts commit cb2fd7eac285b1b0a24eeb2b8ed4456b66c5a09f. Per
numerous buildfarm members, it was incompatible with parallel query, and
a test case assumed LP64. Back-patch to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20200321224920.GB1763544@rfd.leadboat.com
|
|
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
|
|
We used to strategically place newlines after some function call left
parentheses to make pgindent move the argument list a few chars to the
left, so that the whole line would fit under 80 chars. However,
pgindent no longer does that, so the newlines just made the code
vertically longer for no reason. Remove those newlines, and reflow some
of those lines for some extra naturality.
Reviewed-by: Michael Paquier, Tom Lane
Discussion: https://postgr.es/m/20200129200401.GA6303@alvherre.pgsql
|
|
Make the value null only at pg_stat_activity-output time, as suggested
by Tom Lane, instead of messing with the internal state. This should
appease buildfarm members with force_parallel_mode=regress, which are
running parallel queries on logical replication walsenders.
The fact that walsenders can run parallel queries should perhaps be
studied more carefully, but for the moment let's get rid of the red
blots in buildfarm.
Backpatch to pg10, like the previous commit.
Discussion: https://postgr.es/m/30804.1578438763@sss.pgh.pa.us
|
|
Returning a non-NULL time is pointless, sinc a walsender is not a
process that would be running normal transactions anyway, but the code
was unintentionally exposing the process start time intermittently,
which was not only bogus but it also confused monitoring systems looking
for idle transactions. Fix by avoiding all updates in walsenders.
Backpatch to 11, where walsenders started appearing in pg_stat_activity.
Reported-by: Tomas Vondra
Discussion: https://postgr.es/m/20191209234409.exe7osmyalwkt5j4@development
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
Discussion: https://postgr.es/m/20191128144653.GA27883@alvherre.pgsql
|
|
If LISTEN is the only action in a serializable-mode transaction,
and the session was not previously listening, and the notify queue
is not empty, predicate.c reported an assertion failure. That
happened because we'd acquire the transaction's initial snapshot
during PreCommit_Notify, which was called *after* predicate.c
expects any such snapshot to have been established.
To fix, just swap the order of the PreCommit_Notify and
PreCommit_CheckForSerializationFailure calls during CommitTransaction.
This will imply holding the notify-insertion lock slightly longer,
but the difference could only be meaningful in serializable mode,
which is an expensive option anyway.
It appears that this is just an assertion failure, with no
consequences in non-assert builds. A snapshot used only to scan
the notify queue could not have been involved in any serialization
conflicts, so there would be nothing for
PreCommit_CheckForSerializationFailure to do except assign it a
prepareSeqNo and set the SXACT_FLAG_PREPARED flag. And given no
conflicts, neither of those omissions affect the behavior of
ReleasePredicateLocks. This admittedly once-over-lightly analysis
is backed up by the lack of field reports of trouble.
Per report from Mark Dilger. The bug is old, so back-patch to all
supported branches; but the new test case only goes back to 9.6,
for lack of adequate isolationtester infrastructure before that.
Discussion: https://postgr.es/m/3ac7f397-4d5f-be8e-f354-440020675694@gmail.com
Discussion: https://postgr.es/m/13881.1574557302@sss.pgh.pa.us
|
|
Similar to commits 7e735035f2 and dddf4cdc33, this commit makes the order
of header file inclusion consistent for backend modules.
In the passing, removed a couple of duplicate inclusions.
Author: Vignesh C
Reviewed-by: Kuntal Ghosh and Amit Kapila
Discussion: https://postgr.es/m/CALDaNm2Sznv8RR6Ex-iJO6xAdsxgWhCoETkaYX=+9DW3q0QCfA@mail.gmail.com
|
