| Age | Commit message (Collapse) | Author |
|---|
|
The flat file mechanism was removed in PostgreSQL 9.0.
|
|
transaction.
The transaction that is initiated by the parallel worker to cooperate
with the actual transaction started by the main backend to complete the
query execution should not be counted as a separate transaction. The
other internal transactions started and committed by the parallel worker
are still counted as separate transactions as we that is what we do in
other places like autovacuum.
This will partially fix the bloat in transaction stats due to additional
transactions performed by parallel workers. For a complete fix, we need to
decide how we want to show all the transactions that are started internally
for various operations and that is a matter of separate patch.
Reported-by: Haribabu Kommi
Author: Haribabu Kommi
Reviewed-by: Amit Kapila, Jamison Kirk and Rahila Syed
Backpatch-through: 9.6
Discussion: https://postgr.es/m/CAJrrPGc9=jKXuScvNyQ+VNhO0FZk7LLAShAJRyZjnedd2D61EQ@mail.gmail.com
|
|
We usually don't use "namespace" in user-facing error messages. Also,
in master this was replaced by another error message referring to
"temporary objects", so we might as well use that here to avoid
introducing too many variants.
Discussion: https://www.postgresql.org/message-id/bbd3f8d9-e3d5-e5aa-4305-7f0121c3fa94@2ndquadrant.com
|
|
Attempting to use a temporary table within a two-phase transaction is
forbidden for ages. However, there have been uncovered grounds for
a couple of other object types and commands which work on temporary
objects with two-phase commit. In short, trying to create, lock or drop
an object on a temporary schema should not be authorized within a
two-phase transaction, as it would cause its state to create
dependencies with other sessions, causing all sorts of side effects with
the existing session or other sessions spawned later on trying to use
the same temporary schema name.
Regression tests are added to cover all the grounds found, the original
report mentioned function creation, but monitoring closer there are many
other patterns with LOCK, DROP or CREATE EXTENSION which are involved.
One of the symptoms resulting in combining both is that the session
which used the temporary schema is not able to shut down completely,
waiting for being able to drop the temporary schema, something that it
cannot complete because of the two-phase transaction involved with
temporary objects. In this case the client is able to disconnect but
the session remains alive on the backend-side, potentially blocking
connection backend slots from being used. Other problems reported could
also involve server crashes.
This is back-patched down to v10, which is where 9b013dc has introduced
MyXactFlags, something that this patch relies on.
Reported-by: Alexey Bashtanov
Author: Michael Paquier
Reviewed-by: Masahiko Sawada
Discussion: https://postgr.es/m/5d910e2e-0db8-ec06-dd5f-baec420513c3@imap.cc
Backpatch-through: 10
|
|
Commit ffa4cbd62 added logic to detect SIGPIPE failure of a COPY child
process, but it only worked correctly if the SIGPIPE occurred in the
immediate child process. Depending on the shell in use and the
complexity of the shell command string, we might instead get back
an exit code of 128 + SIGPIPE, representing a shell error exit
reporting SIGPIPE in the child process.
We could just hack up ClosePipeToProgram() to add the extra case,
but it seems like this is a fairly general issue deserving a more
general and better-documented solution. I chose to add a couple
of functions in src/common/wait_error.c, which is a natural place
to know about wait-result encodings, that will test for either a
specific child-process signal type or any child-process signal failure.
Then, adjust other places that were doing ad-hoc tests of this type
to use the common functions.
In RestoreArchivedFile, this fixes a race condition affecting whether
the process will report an error or just silently proc_exit(1): before,
that depended on whether the intermediate shell got SIGTERM'd itself
or reported a child process failing on SIGTERM.
Like the previous patch, back-patch to v10; we could go further
but there seems no real need to.
Per report from Erik Rijkers.
Discussion: https://postgr.es/m/f3683f87ab1701bea5d86a7742b22432@xs4all.nl
|
|
On some operating systems, it doesn't make sense to retry fsync(),
because dirty data cached by the kernel may have been dropped on
write-back failure. In that case the only remaining copy of the
data is in the WAL. A subsequent fsync() could appear to succeed,
but not have flushed the data. That means that a future checkpoint
could apparently complete successfully but have lost data.
Therefore, violently prevent any future checkpoint attempts by
panicking on the first fsync() failure. Note that we already
did the same for WAL data; this change extends that behavior to
non-temporary data files.
Provide a GUC data_sync_retry to control this new behavior, for
users of operating systems that don't eject dirty data, and possibly
forensic/testing uses. If it is set to on and the write-back error
was transient, a later checkpoint might genuinely succeed (on a
system that does not throw away buffers on failure); if the error is
permanent, later checkpoints will continue to fail. The GUC defaults
to off, meaning that we panic.
Back-patch to all supported releases.
There is still a narrow window for error-loss on some operating
systems: if the file is closed and later reopened and a write-back
error occurs in the intervening time, but the inode has the bad
luck to be evicted due to memory pressure before we reopen, we could
miss the error. A later patch will address that with a scheme
for keeping files with dirty data open at all times, but we judge
that to be too complicated to back-patch.
Author: Craig Ringer, with some adjustments by Thomas Munro
Reported-by: Craig Ringer
Reviewed-by: Robert Haas, Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/20180427222842.in2e4mibx45zdth5%40alap3.anarazel.de
|
|
If a failure happens when a transaction is starting between the moment
the transaction status is changed from TRANS_DEFAULT to TRANS_START and
the moment the current user ID and security context flags are fetched
via GetUserIdAndSecContext(), or before initializing its basic fields,
then those may get reset to incorrect values when the transaction
aborts, leaving the session in an inconsistent state.
One problem reported is that failing a starting transaction at the first
query of a session could cause several kinds of system crashes on the
follow-up queries.
In order to solve that, move the initialization of the transaction state
fields and the call of GetUserIdAndSecContext() in charge of fetching
the current user ID close to the point where the transaction status is
switched to TRANS_START, where there cannot be any error triggered
in-between, per an idea of Tom Lane. This properly ensures that the
current user ID, the security context flags and that the basic fields of
TransactionState remain consistent even if the transaction fails while
starting.
Reported-by: Richard Guo
Diagnosed-By: Richard Guo
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAN_9JTxECSb=pEPcb0a8d+6J+bDcOZ4=DgRo_B7Y5gRHJUM=Rw@mail.gmail.com
Backpatch-through: 9.4
|
|
Previously, a worker process would establish values for these based on
its own start time. In v10 and up, this can trivially be shown to cause
misbehavior of transaction_timestamp(), timestamp_in(), and related
functions which are (perhaps unwisely?) marked parallel-safe. It seems
likely that other behaviors might diverge from what happens in the parent
as well.
It's not as trivial to demonstrate problems in 9.6 or 9.5, but I'm sure
it's still possible, so back-patch to all branches containing parallel
worker infrastructure.
In HEAD only, mark now() and statement_timestamp() as parallel-safe
(other affected functions already were). While in theory we could
still squeeze that change into v11, it doesn't seem important enough
to force a last-minute catversion bump.
Konstantin Knizhnik, whacked around a bit by me
Discussion: https://postgr.es/m/6406dbd2-5d37-4cb6-6eb2-9c44172c7e7c@postgrespro.ru
|
|
When the checkpointer receives a SIGHUP signal to update its configuration,
it may need to update the shared memory for full_page_writes and need to
write a WAL record for it. Now, it is quite possible that the XLOG
machinery has not been initialized by that time and it will lead to
assertion failure while doing that. Fix is to allow the initialization of
the XLOG machinery outside critical section.
This bug has been introduced by the commit 2c03216d83 which added the XLOG
machinery initialization in RecoveryInProgress code path.
Reported-by: Dilip Kumar
Author: Dilip Kumar
Reviewed-by: Michael Paquier and Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CAFiTN-u4BA8KXcQUWDPNgaKAjDXC=C2whnzBM8TAcv=stckYUw@mail.gmail.com
|
|
A restart point or a checkpoint recycling WAL segments treats segments
marked with neither ".done" (archiving is done) or ".ready" (segment is
ready to be archived) in archive_status the same way for archive_mode
being "on" or "always". While for a primary this is fine, a standby
running a restart point with archive_mode = on would try to mark such a
segment as ready for archiving, which is something that will never
happen except after the standby is promoted.
Note that this problem applies only to WAL segments coming from the
local pg_wal the first time archive recovery is run. Segments part of a
self-contained base backup are the most common case where this could
happen, however even in this case normally the .done markers would be
most likely part of the backup. Segments recovered from an archive are
marked as .ready or .done by the startup process, and segments finished
streaming are marked as such by the WAL receiver, so they are handled
already.
Reported-by: Haruka Takatsuka
Author: Michael Paquier
Discussion: https://postgr.es/m/15402-a453c90ed4cf88b2@postgresql.org
Backpatch-through: 9.5, where archive_mode = always has been added.
|
|
The activation and deactivation of commit timestamp tracking has not
been handled consistently for a primary or standbys at recovery. The
facility can be activated at three different moments of recovery:
- The beginning, where a primary would use the GUC value for the
decision-making, and where a standby relies on the contents of the
control file.
- When replaying a XLOG_PARAMETER_CHANGE record at redo.
- The end, where both primary and standby rely on the GUC value.
Using the GUC value for a primary at the beginning of recovery causes
problems with commit timestamp access when doing crash recovery.
Particularly, when replaying transaction commits, it could be possible
that an attempt to read commit timestamps is done for a transaction
which committed at a moment when track_commit_timestamp was disabled.
A test case is added to reproduce the failure. The test works down to
v11 as it takes advantage of transaction commits within procedures.
Reported-by: Hailong Li
Author: Masahiko Sawasa, Michael Paquier
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/11224478-a782-203b-1f17-e4797b39bdf0@qunar.com
Backpatch-through: 9.5, where commit timestamps have been introduced.
|
|
Several users of extensions complained of crashes in parallel workers
that turned out to be due to syscache access from their _PG_init()
functions. Reorder the initialization of parallel workers so that
libraries are restored after the caches are initialized, and inside a
transaction.
This was reported in bug #15350 and elsewhere. We don't consider it
to be a bug: extensions shouldn't do that, because then they can't be
used in shared_preload_libraries. However, it's a fairly obscure
hazard and these extensions worked in practice before parallel query
came along. So let's make it work. Later commits might add a warning
message and eventually an error.
Back-patch to 9.6, where parallel query landed.
Author: Thomas Munro
Reviewed-by: Amit Kapila
Reported-by: Kieran McCusker, Jimmy
Discussion: https://postgr.es/m/153512195228.1489.8545997741965926448%40wrigleys.postgresql.org
|
|
XLogInsert fails to attach a required FPI to the first record after
full_page_writes is turned on by the last checkpoint. This bug got
introduced in 9.5 due to code rearrangement in commits 2c03216d83 and
2076db2aea. Fix it by ensuring that XLogInsertRecord performs a
recomputation when the given record is generated with FPW as off but
found that the flag has been turned on while actually inserting the
record.
Reported-by: Kyotaro Horiguchi
Author: Kyotaro Horiguchi
Reviewed-by: Amit Kapila
Backpatch-through: 9.5 where this problem was introduced
Discussion: https://postgr.es/m/20180420.151043.74298611.horiguchi.kyotaro@lab.ntt.co.jp
|
|
There's a project policy against using plain "char buf[BLCKSZ]" local
or static variables as page buffers; preferred style is to palloc or
malloc each buffer to ensure it is MAXALIGN'd. However, that policy's
been ignored in an increasing number of places. We've apparently got
away with it so far, probably because (a) relatively few people use
platforms on which misalignment causes core dumps and/or (b) the
variables chance to be sufficiently aligned anyway. But this is not
something to rely on. Moreover, even if we don't get a core dump,
we might be paying a lot of cycles for misaligned accesses.
To fix, invent new union types PGAlignedBlock and PGAlignedXLogBlock
that the compiler must allocate with sufficient alignment, and use
those in place of plain char arrays.
I used these types even for variables where there's no risk of a
misaligned access, since ensuring proper alignment should make
kernel data transfers faster. I also changed some places where
we had been palloc'ing short-lived buffers, for coding style
uniformity and to save palloc/pfree overhead.
Since this seems to be a live portability hazard (despite the lack
of field reports), back-patch to all supported versions.
Patch by me; thanks to Michael Paquier for review.
Discussion: https://postgr.es/m/1535618100.1286.3.camel@credativ.de
|
|
Startup process has improved its calculation of incorrect minimum
consistent point in 8d68ee6, which ensures that all WAL available gets
replayed when doing crash recovery, and has introduced an incorrect
calculation of the minimum recovery point for non-startup processes,
which can cause incorrect page references on a standby when for example
the background writer flushed a couple of pages on-disk but was not
updating the control file to let a subsequent crash recovery replay to
where it should have.
The only case where this has been reported to be a problem is when a
standby needs to calculate the latest removed xid when replaying a btree
deletion record, so one would need connections on a standby that happen
just after recovery has thought it reached a consistent point. Using a
background worker which is started after the consistent point is reached
would be the easiest way to get into problems if it connects to a
database. Having clients which attempt to connect periodically could
also be a problem, but the odds of seeing this problem are much lower.
The fix used is pretty simple, as the idea is to give access to the
minimum recovery point written in the control file to non-startup
processes so as they use a reference, while the startup process still
initializes its own references of the minimum consistent point so as the
original problem with incorrect page references happening post-promotion
with a crash do not show up.
Reported-by: Alexander Kukushkin
Diagnosed-by: Alexander Kukushkin
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, Alexander Kukushkin
Discussion: https://postgr.es/m/153492341830.1368.3936905691758473953@wrigleys.postgresql.org
Backpatch-through: 9.3
|
|
6cb3372 enforces errno to ENOSPC when less bytes than what is expected
have been written when it is unset, though it forgot to properly reset
errno before doing a system call to write(), causing errno to
potentially come from a previous system call.
Reported-by: Tom Lane
Author: Michael Paquier
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/31797.1533326676@sss.pgh.pa.us
|
|
A collection of typos I happened to spot while reading code, as well as
grepping for common mistakes.
Backpatch to all supported versions, as applicable, to avoid conflicts
when backporting other commits in the future.
|
|
Since the old logic was completely unaware of subtransactions, a
change made in a subsequently-aborted subtransaction would still cause
workers to be stopped at toplevel transaction commit. Fix that by
managing a stack of worker lists rather than just one.
Amit Khandekar and Robert Haas
Discussion: http://postgr.es/m/CAJ3gD9eaG_mWqiOTA2LfAug-VRNn1hrhf50Xi1YroxL37QkZNg@mail.gmail.com
|
|
A critical failure in some of the end-of-recovery actions before the
end-of-recovery record is written can cause PostgreSQL to react
inconsistently with the rest of the cluster in the event of a crash
before the final record is written. Two such failures are for example
an error while processing a two-phase state files or when operating on
recovery.conf. With this commit, the failures are still considered
FATAL, but the write of the timeline history file is delayed as much as
possible so as the window between the moment the file is written and the
end-of-recovery record is generated gets minimized. This way, in the
event of a crash or a failure, the new timeline decided at promotion
will not seem taken by other nodes in the cluster. It is not really
possible to reduce to zero this window, hence one could still see
failures if a crash happens between the history file write and the
end-of-recovery record, so any future code should be careful when
adding new end-of-recovery actions. The original report from Magnus
Hagander mentioned a renamed recovery.conf as original end-of-recovery
failure which caused a timeline to be seen as taken but the subsequent
processing on the now-missing recovery.conf cause the startup process to
issue stop on FATAL, which at follow-up startup made the system
inconsistent because of on-disk changes which already happened.
Processing of two-phase state files still needs some work as corrupted
entries are simply ignored now. This is left as a future item and this
commit fixes the original complain.
Reported-by: Magnus Hagander
Author: Heikki Linnakangas
Reviewed-by: Alexander Korotkov, Michael Paquier, David Steele
Discussion: https://postgr.es/m/CABUevEz09XY2EevA2dLjPCY-C5UO4Hq=XxmXLmF6ipNFecbShQ@mail.gmail.com
|
|
If a standby crashes after promotion before having completed its first
post-recovery checkpoint, then the minimal recovery point which marks
the LSN position where the cluster is able to reach consistency may be
set to a position older than the first end-of-recovery checkpoint while
all the WAL available should be replayed. This leads to the instance
thinking that it contains inconsistent pages, causing a PANIC and a hard
instance crash even if all the WAL available has not been replayed for
certain sets of records replayed. When in crash recovery,
minRecoveryPoint is expected to always be set to InvalidXLogRecPtr,
which forces the recovery to replay all the WAL available, so this
commit makes sure that the local copy of minRecoveryPoint from the
control file is initialized properly and stays as it is while crash
recovery is performed. Once switching to archive recovery or if crash
recovery finishes, then the local copy minRecoveryPoint can be safely
updated.
Pavan Deolasee has reported and diagnosed the failure in the first
place, and the base fix idea to rely on the local copy of
minRecoveryPoint comes from Kyotaro Horiguchi, which has been expanded
into a full-fledged patch by me. The test included in this commit has
been written by Álvaro Herrera and Pavan Deolasee, which I have modified
to make it faster and more reliable with sleep phases.
Backpatch down to all supported versions where the bug appears, aka 9.3
which is where the end-of-recovery checkpoint is not run by the startup
process anymore. The test gets easily supported down to 10, still it
has been tested on all branches.
Reported-by: Pavan Deolasee
Diagnosed-by: Pavan Deolasee
Reviewed-by: Pavan Deolasee, Kyotaro Horiguchi
Author: Michael Paquier, Kyotaro Horiguchi, Pavan Deolasee, Álvaro
Herrera
Discussion: https://postgr.es/m/CABOikdPOewjNL=05K5CbNMxnNtXnQjhTx2F--4p4ruorCjukbA@mail.gmail.com
|
|
When multiple relations are deleted at the same transaction,
the files of those relations are deleted by one call to smgrdounlinkall(),
which leads to scan whole shared_buffers only one time. OTOH,
previously, during recovery, smgrdounlink() (not smgrdounlinkall()) was
called for each file to delete, which led to scan shared_buffers
multiple times. Obviously this could cause to increase the WAL replay
time very much especially when shared_buffers was huge.
To alleviate this situation, this commit changes the recovery so that
it also calls smgrdounlinkall() only one time to delete multiple
relation files.
This is just fix for oversight of commit 279628a0a7, not new feature.
So, per discussion on pgsql-hackers, we concluded to backpatch this
to all supported versions.
Author: Fujii Masao
Reviewed-by: Michael Paquier, Andres Freund, Thomas Munro, Kyotaro Horiguchi, Takayuki Tsunakawa
Discussion: https://postgr.es/m/CAHGQGwHVQkdfDqtvGVkty+19cQakAydXn1etGND3X0PHbZ3+6w@mail.gmail.com
|
|
System calls mixed up in error code paths are causing two issues which
several code paths have not correctly handled:
1) For write() calls, sometimes the system may return less bytes than
what has been written without errno being set. Some paths were careful
enough to consider that case, and assumed that errno should be set to
ENOSPC, other calls missed that.
2) errno generated by a system call is overwritten by other system calls
which may succeed once an error code path is taken, causing what is
reported to the user to be incorrect.
This patch uses the brute-force approach of correcting all those code
paths. Some refactoring could happen in the future, but this is let as
future work, which is not targeted for back-branches anyway.
Author: Michael Paquier
Reviewed-by: Ashutosh Sharma
Discussion: https://postgr.es/m/20180622061535.GD5215@paquier.xyz
|
|
When a standby's WAL receiver stops reading WAL from a WAL stream, it
writes data to the current WAL segment without having priorily zero'ed
the page currently written to, which can cause the WAL reader to read
junk data from a past recycled segment and then it would try to get a
record from it. While sanity checks in place provide most of the
protection needed, in some rare circumstances, with chances increasing
when a record header crosses a page boundary, then the startup process
could fail violently on an allocation failure, as follows:
FATAL: invalid memory alloc request size XXX
This is confusing for the user and also unhelpful as this requires in
the worst case a manual restart of the instance, impacting potentially
the availability of the cluster, and this also makes WAL data look like
it is in a corrupted state.
The chances of seeing failures are higher if the connection between the
standby and its root node is unstable, causing WAL pages to be written
in the middle. A couple of approaches have been discussed, like
zero-ing new WAL pages within the WAL receiver itself but this has the
disadvantage of impacting performance of any existing instances as this
breaks the sequential writes done by the WAL receiver. This commit
deals with the problem with a more simple approach, which has no
performance impact without reducing the detection of the problem: if a
record is found with a length higher than 1GB for backends, then do not
try any allocation and report a soft failure which will force the
standby to retry reading WAL. It could be possible that the allocation
call passes and that an unnecessary amount of memory is allocated,
however follow-up checks on records would just fail, making this
allocation short-lived anyway.
This patch owes a great deal to Tsunakawa Takayuki for reporting the
failure first, and then discussing a couple of potential approaches to
the problem.
Backpatch down to 9.5, which is where palloc_extended has been
introduced.
Reported-by: Tsunakawa Takayuki
Reviewed-by: Tsunakawa Takayuki
Author: Michael Paquier
Discussion: https://postgr.es/m/0A3221C70F24FB45833433255569204D1F8B57AD@G01JPEXMBYT05
|
|
This bug causes a lseek() failure to be reported as a "could not open"
failure in the error message, muddling bug reports. I introduced this
copy-and-pasteo in commit 78e122010422.
Noticed while reviewing code for bug report #15221, from lily liang. In
version 10 the affected function is only used by multixact.c and
commit_ts, and only in corner-case circumstances, neither of which are
involved in the reported bug (a pg_subtrans failure.)
Author: Álvaro Herrera
|
|
Instead of saying "error: success", indicate that we got a working read
but it was too short.
|
|
If a continuation record is split so that its first half has already been
removed from the master, and is only present in pg_wal, and there is a
recycled WAL segment in the standby server that looks like it would
contain the second half, recovery would get stuck. The code in
XLogPageRead() incorrectly started streaming at the beginning of the
WAL record, even if we had already read the first page.
Backpatch to 9.4. In principle, older versions have the same problem, but
without replication slots, there was no straightforward mechanism to
prevent the master from recycling old WAL that was still needed by standby.
Without such a mechanism, I think it's reasonable to assume that there's
enough slack in how many old segments are kept around to not run into this,
or you have a WAL archive.
Reported by Jonathon Nelson. Analysis and patch by Kyotaro HORIGUCHI, with
some extra comments by me.
Discussion: https://www.postgresql.org/message-id/CACJqAM3xVz0JY1XFDKPP%2BJoJAjoGx%3DGNuOAshEDWCext7BFvCQ%40mail.gmail.com
|
|
If an interrupt arrives in the middle of FinishPreparedTransaction
and any callback decide to call CHECK_FOR_INTERRUPTS (e.g.
RemoveTwoPhaseFile can write a warning with ereport, which checks for
interrupts) then it's possible to leave current GXact undeleted.
Backpatch to all supported branches
Stas Kelvich
Discussion: ihttps://www.postgresql.org/message-id/3AD85097-A3F3-4EBA-99BD-C38EDF8D2949@postgrespro.ru
|
|
The nextOid value is from the start of the checkpoint and may well be stale
compared to values from more recent XLOG_NEXTOID records. Previously, we
adopted it anyway, allowing the OID counter to go backwards during a crash.
While this should be harmless, it contributed to the severity of the bug
fixed in commit 0408e1ed5, by allowing duplicate TOAST OIDs to be assigned
immediately following a crash. Without this error, that issue would only
have arisen when TOAST objects just younger than a multiple of 2^32 OIDs
were deleted and then not vacuumed in time to avoid a conflict.
Pavan Deolasee
Discussion: https://postgr.es/m/CABOikdOgWT2hHkYG3Wwo2cyZJq2zfs1FH0FgX-=h4OLosXHf9w@mail.gmail.com
|
|
Commit 445dbd82a basically missed the point of commit d46633506,
which was that we shouldn't allow shm_toc_lookup() failure to lead
to a core dump or assertion crash, because the odds of such a
failure should never be considered negligible. It's correct that
we can't expect the PARALLEL_KEY_ERROR_QUEUE TOC entry to be there
if we have no workers. But if we have no workers, we're not going
to do anything in this function with the lookup result anyway,
so let's just skip it. That lets the code use the easy-to-prove-safe
noError=false case, rather than anything requiring effort to review.
Back-patch to v10, like the previous commit.
Discussion: https://postgr.es/m/3647.1517601675@sss.pgh.pa.us
|
|
Commit 28724fd90d2f85a0573a8107b48abad062a86d83 fixed things so that
if a background worker fails to start due to fork() failure or because
it is terminated before startup succeeds, BGWH_STOPPED will be
reported. However, that only helps if the code that uses the
background worker machinery notices the change in status, and the code
in parallel.c did not.
To fix that, do two things. First, make sure that when a worker
exits, it triggers the leader to read from error queues. That way, if
a worker which has attached to an error queue exits uncleanly, the
leader is sure to throw some error, either the contents of the
ErrorResponse sent by the worker, or "lost connection to parallel
worker" if it exited without sending one. To cover the case where
the worker never starts up in the first place or exits before
attaching to the error queue, the ParallelContext now keeps track
of which workers have sent at least one message via the error
queue. A worker which sends no messages by the time the parallel
operation finishes will be checked to see whether it exited before
attaching to the error queue; if so, a new error message, "parallel
worker failed to initialize", will be reported. If not, we'll
continue to wait until it either starts up and exits cleanly, starts
up and exits uncleanly, or fails to start, and then take the
appropriate action.
Patch by me, reviewed by Amit Kapila.
Discussion: http://postgr.es/m/CA+TgmoYnBgXgdTu6wk5YPdWhmgabYc9nY_pFLq=tB=FSLYkD8Q@mail.gmail.com
|
|
Generally, error recovery paths that need to do things like
LWLockReleaseAll and pgstat_report_wait_end also need to call
ConditionVariableCancelSleep, but AbortSubTransaction was missed.
Since subtransaction abort might destroy up the DSM segment that
contains the ConditionVariable stored in cv_sleep_target, this
can result in a crash for anything using condition variables.
Reported and diagnosed by Andres Freund.
Discussion: http://postgr.es/m/20171221110048.rxk6464azzl5t2fi@alap3.anarazel.de
|
|
Previously an assertion failure occurred when pg_stop_backup() for
non-exclusive backup was aborted while it's waiting for WAL files to
be archived. This assertion failure happened in do_pg_abort_backup()
which was called when a non-exclusive backup was canceled.
do_pg_abort_backup() assumes that there is at least one non-exclusive
backup running when it's called. But pg_stop_backup() can be canceled
even after it marks the end of non-exclusive backup (e.g.,
during waiting for WAL archiving). This broke the assumption that
do_pg_abort_backup() relies on, and which caused an assertion failure.
This commit changes do_pg_abort_backup() so that it does nothing
when non-exclusive backup has been already marked as completed.
That is, the asssumption is also changed, and do_pg_abort_backup()
now can handle even the case where it's called when there is
no running backup.
Backpatch to 9.6 where SQL-callable non-exclusive backup was added.
Author: Masahiko Sawada and Michael Paquier
Reviewed-By: Robert Haas and Fujii Masao
Discussion: https://www.postgresql.org/message-id/CAD21AoD2L1Fu2c==gnVASMyFAAaq3y-AQ2uEVj-zTCGFFjvmDg@mail.gmail.com
|
|
Reported-by: Masahiko Sawada <sawada.mshk@gmail.com>
|
|
This patch fixes a couple of low-probability bugs that could lead to
reporting an irrelevant errno value (and hence possibly a wrong SQLSTATE)
concerning directory-open or file-open failures. It also fixes places
where we took shortcuts in reporting such errors, either by using elog
instead of ereport or by using ereport but forgetting to specify an
errcode. And it eliminates a lot of just plain redundant error-handling
code.
In service of all this, export fd.c's formerly-static function
ReadDirExtended, so that external callers can make use of the coding
pattern
dir = AllocateDir(path);
while ((de = ReadDirExtended(dir, path, LOG)) != NULL)
if they'd like to treat directory-open failures as mere LOG conditions
rather than errors. Also fix FreeDir to be a no-op if we reach it
with dir == NULL, as such a coding pattern would cause.
Then, remove code at many call sites that was throwing an error or log
message for AllocateDir failure, as ReadDir or ReadDirExtended can handle
that job just fine. Aside from being a net code savings, this gets rid of
a lot of not-quite-up-to-snuff reports, as mentioned above. (In some
places these changes result in replacing a custom error message such as
"could not open tablespace directory" with more generic wording "could not
open directory", but it was agreed that the custom wording buys little as
long as we report the directory name.) In some other call sites where we
can't just remove code, change the error reports to be fully
project-style-compliant.
Also reorder code in restoreTwoPhaseData that was acquiring a lock
between AllocateDir and ReadDir; in the unlikely but surely not
impossible case that LWLockAcquire changes errno, AllocateDir failures
would be misreported. There is no great value in opening the directory
before acquiring TwoPhaseStateLock, so just do it in the other order.
Also fix CheckXLogRemoved to guarantee that it preserves errno,
as quite a number of call sites are implicitly assuming. (Again,
it's unlikely but I think not impossible that errno could change
during a SpinLockAcquire. If so, this function was broken for its
own purposes as well as breaking callers.)
And change a few places that were using not-per-project-style messages,
such as "could not read directory" when "could not open directory" is
more correct.
Back-patch the exporting of ReadDirExtended, in case we have occasion
to back-patch some fix that makes use of it; it's not needed right now
but surely making it global is pretty harmless. Also back-patch the
restoreTwoPhaseData and CheckXLogRemoved fixes. The rest of this is
essentially cosmetic and need not get back-patched.
Michael Paquier, with a bit of additional work by me
Discussion: https://postgr.es/m/CAB7nPqRpOCxjiirHmebEFhXVTK7V5Jvw4bz82p7Oimtsm3TyZA@mail.gmail.com
|
|
Commit d4663350646ca0c069a36d906155a0f7e3372eb7 changed things so
that shm_toc_lookup would fail with an error rather than silently
returning NULL in the hope that such failures would be reported
in a useful way rather than via a system crash. However, it
overlooked the fact that the lookup of PARALLEL_KEY_ERROR_QUEUE
in ReinitializeParallelDSM is expected to fail when no DSM segment
was created in the first place; in that case, we end up with a
backend-private memory segment that still contains an entry for
PARALLEL_KEY_FIXED but no others. Consequently a benign failure
to initialize parallelism can escalate into an elog(ERROR);
repair.
Discussion: http://postgr.es/m/CA+Tgmob8LFw55DzH1QEREpBEA9RJ_W_amhBFCVZ6WMwUhVpOqg@mail.gmail.com
|
|
Originally, we palloc'd this buffer just barely big enough to hold the
largest xlog record seen so far. It turns out that that can result in
valgrind complaints, because some compilers will emit code that assumes
it can safely fetch padding bytes at the end of a struct, and those
padding bytes were unallocated so far as aset.c was concerned. We can
fix that by MAXALIGN'ing the palloc request size, ensuring that it is big
enough to include any possible padding that might've been omitted from
the on-disk record.
An additional objection to the original coding is that it could result in
many repeated palloc cycles, in the worst case where we see a series of
gradually larger xlog records. We can ameliorate that cheaply by
imposing a minimum buffer size that's large enough for most xlog records.
BLCKSZ/2 was chosen after a bit of discussion.
In passing, remove an obsolete comment in struct xl_heap_new_cid that the
combocid field is free due to alignment considerations. Perhaps that was
true at some point, but it's not now.
Back-patch to 9.5 where this code came in.
Discussion: https://postgr.es/m/E1eHa4J-0006hI-Q8@gemulon.postgresql.org
|
|
Without this fix, dropping a role can sometimes result in parallel
query failures in sessions that have used "SET ROLE" to assume the
dropped role, even if that setting isn't active any more.
Report by Pavan Deolasee. Patch by Amit Kapila, reviewed by me.
Discussion: http://postgr.es/m/CABOikdOomRcZsLsLK+Z+qENM1zxyaWnAvFh3MJZzZnnKiF+REg@mail.gmail.com
|
|
Sloppy loop coding in set_status_by_pages() resulted in fetching one array
element more than it should from the subxids[] array. The odds of this
resulting in SIGSEGV are pretty small, but we've certainly seen that happen
with similar mistakes elsewhere. While at it, we can get rid of an extra
TransactionIdToPage() calculation per loop.
Per report from David Binderman. Back-patch to all supported branches,
since this code is quite old.
Discussion: https://postgr.es/m/HE1PR0802MB2331CBA919CBFFF0C465EB429C710@HE1PR0802MB2331.eurprd08.prod.outlook.com
|
|
This reverts commit 15bc038f9, along with the followon commits 1635e80d3
and 984c92074 that tried to clean up the problems exposed by bug #14825.
The result was incomplete because it failed to address parallel-query
requirements. With 10.0 release so close upon us, now does not seem like
the time to be adding more code to fix that. I hope we can un-revert this
code and add the missing parallel query support during the v11 cycle.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
|
|
Commit 15bc038f9 allowed ALTER TYPE ADD VALUE to be executed inside
transaction blocks, by disallowing the use of the added value later
in the same transaction, except under limited circumstances. However,
the test for "limited circumstances" was heuristic and could reject
references to enum values that were created during CREATE TYPE AS ENUM,
not just later. This breaks the use-case of restoring pg_dump scripts
in a single transaction, as reported in bug #14825 from Balazs Szilfai.
We can improve this by keeping a "blacklist" table of enum value OIDs
created by ALTER TYPE ADD VALUE during the current transaction. Any
visible-but-uncommitted value whose OID is not in the blacklist must
have been created by CREATE TYPE AS ENUM, and can be used safely
because it could not have a lifespan shorter than its parent enum type.
This change also removes the restriction that a renamed enum value
can't be used before being committed (unless it was on the blacklist).
Andrew Dunstan, with cosmetic improvements by me.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
|
|
If the LSN is different, the checksum will be different, too.
Ashwin Agrawal, reviewed by Michael Paquier and Kuntal Ghosh
Discussion: http://postgr.es/m/CALfoeis5iqrAU-+JAN+ZzXkpPr7+-0OAGv7QUHwFn=-wDy4o4Q@mail.gmail.com
|
|
|
|
The logic around shm_mq_detach was a few bricks shy of a load, because
(contrary to the comments for shm_mq_attach) all it did was update the
shared shm_mq state. That left us leaking a bit of process-local
memory, but much worse, the on_dsm_detach callback for shm_mq_detach
was still armed. That means that whenever we ultimately detach from
the DSM segment, we'd run shm_mq_detach again for already-detached,
possibly long-dead queues. This accidentally fails to fail today,
because we only ever re-use a shm_mq's memory for another shm_mq, and
multiple detach attempts on the last such shm_mq are fairly harmless.
But it's gonna bite us someday, so let's clean it up.
To do that, change shm_mq_detach's API so it takes a shm_mq_handle
not the underlying shm_mq. This makes the callers simpler in most
cases anyway. Also fix a few places in parallel.c that were just
pfree'ing the handle structs rather than doing proper cleanup.
Back-patch to v10 because of the risk that the revenant shm_mq_detach
callbacks would cause a live bug sometime. Since this is an API
change, it's too late to do it in 9.6. (We could make a variant
patch that preserves API, but I'm not excited enough to do that.)
Discussion: https://postgr.es/m/8670.1504192177@sss.pgh.pa.us
|
|
|
|
Stress testing by Andreas Seltenreich disclosed longstanding problems that
occur if a FATAL exit (e.g. due to receipt of SIGTERM) occurs while we are
trying to execute a ROLLBACK of an already-failed transaction. In such a
case, xact.c is in TBLOCK_ABORT state, so that AbortOutOfAnyTransaction
would skip AbortTransaction and go straight to CleanupTransaction. This
led to an assert failure in an assert-enabled build (due to the ROLLBACK's
portal still having a cleanup hook) or without assertions, to a FATAL exit
complaining about "cannot drop active portal". The latter's not
disastrous, perhaps, but it's messy enough to want to improve it.
We don't really want to run all of AbortTransaction in this code path.
The minimum required to clean up the open portal safely is to do
AtAbort_Memory and AtAbort_Portals. It seems like a good idea to
do AtAbort_Memory unconditionally, to be entirely sure that we are
starting with a safe CurrentMemoryContext. That means that if the
main loop in AbortOutOfAnyTransaction does nothing, we need an extra
step at the bottom to restore CurrentMemoryContext = TopMemoryContext,
which I chose to do by invoking AtCleanup_Memory. This'll result in
calling AtCleanup_Memory twice in many of the paths through this function,
but that seems harmless and reasonably inexpensive.
The original motivation for the assertion in AtCleanup_Portals was that
we wanted to be sure that any user-defined code executed as a consequence
of the cleanup hook runs during AbortTransaction not CleanupTransaction.
That still seems like a valid concern, and now that we've seen one case
of the assertion firing --- which means that exactly that would have
happened in a production build --- let's replace the Assert with a runtime
check. If we see the cleanup hook still set, we'll emit a WARNING and
just drop the hook unexecuted.
This has been like this a long time, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/877ey7bmun.fsf@ansel.ydns.eu
|
|
The sole useful effect of this function, to check that no catcache
entries have positive refcounts at transaction end, has really been
obsolete since we introduced ResourceOwners in PG 8.1. We reduced the
checks to assertions years ago, so that the function was a complete
no-op in production builds. There have been previous discussions about
removing it entirely, but consensus up to now was that it had some small
value as a cross-check for bugs in the ResourceOwner logic.
However, it now emerges that it's possible to trigger these assertions
if you hit an assert-enabled backend with SIGTERM during a call to
SearchCatCacheList, because that function temporarily increases the
refcounts of entries it's intending to add to a catcache list construct.
In a normal ERROR scenario, the extra refcounts are cleaned up by
SearchCatCacheList's PG_CATCH block; but in a FATAL exit we do a
transaction abort and exit without ever executing PG_CATCH handlers.
There's a case to be made that this is a generic hazard and we should
consider restructuring elog(FATAL) handling so that pending PG_CATCH
handlers do get run. That's pretty scary though: it could easily create
more problems than it solves. Preliminary stress testing by Andreas
Seltenreich suggests that there are not many live problems of this ilk,
so we rejected that idea.
There are more-localized ways to fix the problem; the most principled
one would be to use PG_ENSURE_ERROR_CLEANUP instead of plain PG_TRY.
But adding cycles to SearchCatCacheList isn't very appealing. We could
also weaken the assertions in AtEOXact_CatCache in some more or less
ad-hoc way, but that just makes its raison d'etre even less compelling.
In the end, the most reasonable solution seems to be to just remove
AtEOXact_CatCache altogether, on the grounds that it's not worth trying
to fix it. It hasn't found any bugs for us in many years.
Per report from Jeevan Chalke. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAM2+6=VEE30YtRQCZX7_sCFsEpoUkFBV1gZazL70fqLn8rcvBA@mail.gmail.com
|
|
This affects mostly code comments, some documentation, and tests.
Official APIs already used "standby".
|
|
We must advance the oldest XID that can be safely looked up in clog
*before* truncating CLOG, and the oldest XID that can't be reused
*after* truncating CLOG. This assertion, and the accompanying
comment, are confused; remove them.
Reported by Neha Sharma.
Discussion: http://postgr.es/m/CANiYTQumC3T=UMBMd1Hor=5XWZYuCEQBioL3ug0YtNQCMMT5wQ@mail.gmail.com
|
|
Previously, it had no effect. Now, if archive_mode=always, it will
work, and if not, you'll get a warning.
Masahiko Sawada, Michael Paquier, and Robert Haas. The patch as
submitted also changed the behavior so that we would write and remove
history files on standbys, but that seems like material for a separate
patch to me.
Discussion: http://postgr.es/m/CAD21AoC2Xw6M=ZJyejq_9d_iDkReC_=rpvQRw5QsyzKQdfYpkw@mail.gmail.com
|
|
This allows a transaction abort to avoid killing those workers.
Author: Petr Jelinek <petr.jelinek@2ndquadrant.com>
|
