| Age | Commit message (Collapse) | Author |
|---|
|
Up to now, committing a transaction has caused CurrentMemoryContext to
get set to TopMemoryContext. Most callers did not pay any particular
heed to this, which is problematic because TopMemoryContext is a
long-lived context that never gets reset. If the caller assumes it
can leak memory because it's running in a limited-lifespan context,
that behavior translates into a session-lifespan memory leak.
The first-reported instance of this involved ProcessIncomingNotify,
which is called from the main processing loop that normally runs in
MessageContext. That outer-loop code assumes that whatever it
allocates will be cleaned up when we're done processing the current
client message --- but if we service a notify interrupt, then whatever
gets allocated before the next switch to MessageContext will be
permanently leaked in TopMemoryContext. sinval catchup interrupts
have a similar problem, and I strongly suspect that some places in
logical replication do too.
To fix this in a generic way, let's redefine the behavior as
"CommitTransactionCommand restores the memory context that was current
at entry to StartTransactionCommand". This clearly fixes the issue
for the notify and sinval cases, and it seems to match the mental
model that's in use in the logical replication code, to the extent
that anybody thought about it there at all.
For consistency, likewise make subtransaction exit restore the context
that was current at subtransaction start (rather than always selecting
the CurTransactionContext of the parent transaction level). This case
has less risk of resulting in a permanent leak than the outer-level
behavior has, but it would not meet the principle of least surprise
for some CommitTransactionCommand calls to restore the previous
context while others don't.
While we're here, also change xact.c so that we reset
TopTransactionContext at transaction exit and then re-use it in later
transactions, rather than dropping and recreating it in each cycle.
This probably doesn't save a lot given the context recycling mechanism
in aset.c, but it should save a little bit. Per suggestion from David
Rowley. (Parenthetically, the text in src/backend/utils/mmgr/README
implies that this is how I'd planned to implement it as far back as
commit 1aebc3618 --- but the code actually added in that commit just
drops and recreates it each time.)
This commit also cleans up a few places outside xact.c that were
needlessly making TopMemoryContext current, and thus risking more
leaks of the same kind. I don't think any of them represent
significant leak risks today, but let's deal with them while the
issue is top-of-mind.
Per bug #18512 from wizardbrony. Commit to HEAD only, as this change
seems to have some risk of breaking things for some callers. We'll
apply a narrower fix for the known-broken cases in the back branches.
Discussion: https://postgr.es/m/3478884.1718656625@sss.pgh.pa.us
|
|
Before this commit, when the WAL summarizer started up or recovered
from an error, it would resume summarization from wherever it left
off. That was OK normally, but wrong if summarize_wal=off had been
turned off temporary, allowing some WAL to be removed, and then turned
back on again. In such cases, the WAL summarizer would simply hang
forever. This commit changes the reinitialization sequence for WAL
summarizer to rederive the starting position in the way we were
already doing at initial startup, fixing the problem.
Per report from Israel Barth Rubio. Reviewed by Tom Lane.
Discussion: http://postgr.es/m/CA+TgmoYN6x=YS+FoFOS6=nr6=qkXZFWhdiL7k0oatGwug2hcuA@mail.gmail.com
|
|
We did not recover the subtransaction IDs of prepared transactions
when starting a hot standby from a shutdown checkpoint. As a result,
such subtransactions were considered as aborted, rather than
in-progress. That would lead to hint bits being set incorrectly, and
the subtransactions suddenly becoming visible to old snapshots when
the prepared transaction was committed.
To fix, update pg_subtrans with prepared transactions's subxids when
starting hot standby from a shutdown checkpoint. The snapshots taken
from that state need to be marked as "suboverflowed", so that we also
check the pg_subtrans.
Backport to all supported versions.
Discussion: https://www.postgresql.org/message-id/6b852e98-2d49-4ca1-9e95-db419a2696e0@iki.fi
|
|
1. TruncateMultiXact() performs the SLRU truncations in a critical
section. Deleting the SLRU segments calls ForwardSyncRequest(), which
will try to compact the request queue if it's full
(CompactCheckpointerRequestQueue()). That in turn allocates memory,
which is not allowed in a critical section. Backtrace:
TRAP: failed Assert("CritSectionCount == 0 || (context)->allowInCritSection"), File: "../src/backend/utils/mmgr/mcxt.c", Line: 1353, PID: 920981
postgres: autovacuum worker template0(ExceptionalCondition+0x6e)[0x560a501e866e]
postgres: autovacuum worker template0(+0x5dce3d)[0x560a50217e3d]
postgres: autovacuum worker template0(ForwardSyncRequest+0x8e)[0x560a4ffec95e]
postgres: autovacuum worker template0(RegisterSyncRequest+0x2b)[0x560a50091eeb]
postgres: autovacuum worker template0(+0x187b0a)[0x560a4fdc2b0a]
postgres: autovacuum worker template0(SlruDeleteSegment+0x101)[0x560a4fdc2ab1]
postgres: autovacuum worker template0(TruncateMultiXact+0x2fb)[0x560a4fdbde1b]
postgres: autovacuum worker template0(vac_update_datfrozenxid+0x4b3)[0x560a4febd2f3]
postgres: autovacuum worker template0(+0x3adf66)[0x560a4ffe8f66]
postgres: autovacuum worker template0(AutoVacWorkerMain+0x3ed)[0x560a4ffe7c2d]
postgres: autovacuum worker template0(+0x3b1ead)[0x560a4ffecead]
postgres: autovacuum worker template0(+0x3b620e)[0x560a4fff120e]
postgres: autovacuum worker template0(+0x3b3fbb)[0x560a4ffeefbb]
postgres: autovacuum worker template0(+0x2f724e)[0x560a4ff3224e]
/lib/x86_64-linux-gnu/libc.so.6(+0x27c8a)[0x7f62cc642c8a]
/lib/x86_64-linux-gnu/libc.so.6(__libc_start_main+0x85)[0x7f62cc642d45]
postgres: autovacuum worker template0(_start+0x21)[0x560a4fd16f31]
To fix, bail out in CompactCheckpointerRequestQueue() without doing
anything, if it's called in a critical section. That covers the above
call path, as well as any other similar cases where
RegisterSyncRequest might be called in a critical section.
2. After fixing that, another problem became apparent: Autovacuum
process doing that truncation can deadlock with the checkpointer
process. TruncateMultiXact() sets "MyProc->delayChkptFlags |=
DELAY_CHKPT_START". If the sync request queue is full and cannot be
compacted, the process will repeatedly sleep and retry, until there is
room in the queue. However, if the checkpointer is trying to start a
checkpoint at the same time, and is waiting for the DELAY_CHKPT_START
processes to finish, the queue will never shrink.
More concretely, the autovacuum process is stuck here:
#0 0x00007fc934926dc3 in epoll_wait () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x000056220b24348b in WaitEventSetWaitBlock (set=0x56220c2e4b50, occurred_events=0x7ffe7856d040, nevents=1, cur_timeout=<optimized out>) at ../src/backend/storage/ipc/latch.c:1570
#2 WaitEventSetWait (set=0x56220c2e4b50, timeout=timeout@entry=10, occurred_events=<optimized out>, occurred_events@entry=0x7ffe7856d040, nevents=nevents@entry=1,
wait_event_info=wait_event_info@entry=150994949) at ../src/backend/storage/ipc/latch.c:1516
#3 0x000056220b243224 in WaitLatch (latch=<optimized out>, latch@entry=0x0, wakeEvents=wakeEvents@entry=40, timeout=timeout@entry=10, wait_event_info=wait_event_info@entry=150994949)
at ../src/backend/storage/ipc/latch.c:538
#4 0x000056220b26cf46 in RegisterSyncRequest (ftag=ftag@entry=0x7ffe7856d0a0, type=type@entry=SYNC_FORGET_REQUEST, retryOnError=true) at ../src/backend/storage/sync/sync.c:614
#5 0x000056220af9db0a in SlruInternalDeleteSegment (ctl=ctl@entry=0x56220b7beb60 <MultiXactMemberCtlData>, segno=segno@entry=11350) at ../src/backend/access/transam/slru.c:1495
#6 0x000056220af9dab1 in SlruDeleteSegment (ctl=ctl@entry=0x56220b7beb60 <MultiXactMemberCtlData>, segno=segno@entry=11350) at ../src/backend/access/transam/slru.c:1566
#7 0x000056220af98e1b in PerformMembersTruncation (oldestOffset=<optimized out>, newOldestOffset=<optimized out>) at ../src/backend/access/transam/multixact.c:3006
#8 TruncateMultiXact (newOldestMulti=newOldestMulti@entry=3221225472, newOldestMultiDB=newOldestMultiDB@entry=4) at ../src/backend/access/transam/multixact.c:3201
#9 0x000056220b098303 in vac_truncate_clog (frozenXID=749, minMulti=<optimized out>, lastSaneFrozenXid=749, lastSaneMinMulti=3221225472) at ../src/backend/commands/vacuum.c:1917
#10 vac_update_datfrozenxid () at ../src/backend/commands/vacuum.c:1760
#11 0x000056220b1c3f76 in do_autovacuum () at ../src/backend/postmaster/autovacuum.c:2550
#12 0x000056220b1c2c3d in AutoVacWorkerMain (startup_data=<optimized out>, startup_data_len=<optimized out>) at ../src/backend/postmaster/autovacuum.c:1569
and the checkpointer is stuck here:
#0 0x00007fc9348ebf93 in clock_nanosleep () from /lib/x86_64-linux-gnu/libc.so.6
#1 0x00007fc9348fe353 in nanosleep () from /lib/x86_64-linux-gnu/libc.so.6
#2 0x000056220b40ecb4 in pg_usleep (microsec=microsec@entry=10000) at ../src/port/pgsleep.c:50
#3 0x000056220afb43c3 in CreateCheckPoint (flags=flags@entry=108) at ../src/backend/access/transam/xlog.c:7098
#4 0x000056220b1c6e86 in CheckpointerMain (startup_data=<optimized out>, startup_data_len=<optimized out>) at ../src/backend/postmaster/checkpointer.c:464
To fix, add AbsorbSyncRequests() to the loops where the checkpointer
waits for DELAY_CHKPT_START or DELAY_CHKPT_COMPLETE operations to
finish.
Backpatch to v14. Before that, SLRU deletion didn't call
RegisterSyncRequest, which avoided this failure. I'm not sure if there
are other similar scenarios on older versions, but we haven't had
any such reports.
Discussion: https://www.postgresql.org/message-id/ccc66933-31c1-4f6a-bf4b-45fef0d4f22e@iki.fi
|
|
The macros were confused about the argument data types. All the
arguments were called 'xid', and some of the macros included casts to
TransactionId, even though the arguments were actually either
MultiXactIds or MultiXactOffsets. It compiles to the same thing,
because TransactionId, MultiXactId and MultiXactOffset are all
typedefs of uint32, but it was highly misleading.
Author: Maxim Orlov <orlovmg@gmail.com>
Discussion: https://www.postgresql.org/message-id/CACG%3DezbLUG-OD1osAW3OchOMxZtdxHh2itYR9Zhh-a13wEBEQw%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/ff143b24-a093-40da-9833-d36b83726bdf%40iki.fi
|
|
The purpose of the function is to reduce the effective
autovacuum_multixact_freeze_max_age if the multixact members SLRU is
approaching wraparound, to make multixid freezing more aggressive.
The returned value should therefore never be greater than plain
autovacuum_multixact_freeze_max_age.
Reviewed-by: Robert Haas
Discussion: https://www.postgresql.org/message-id/85fb354c-f89f-4d47-b3a2-3cbd461c90a3@iki.fi
Backpatch-through: 12, all supported versions
|
|
ReorderBufferImmediateInvalidation() executes invalidation messages in
an aborted transaction. However, RelationFlushRelation sometimes
required a valid resource owner, to temporarily increment the refcount
of the relache entry. Commit b8bff07daa worked around that in the main
subtransaction abort function, AbortSubTransaction(), but missed this
similar case in ReorderBufferImmediateInvalidation().
To fix, introduce a separate function to invalidate a relcache
entry. It does the same thing as RelationClearRelation(rebuild==true)
does when outside a transaction, but can be called without
incrementing the refcount.
Add regression test. Before this fix, it failed with:
ERROR: ResourceOwnerEnlarge called after release started
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://www.postgresql.org/message-id/e56be7d9-14b1-664d-0bfc-00ce9772721c@gmail.com
|
|
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf65 and
8d9978a7176, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
|
|
Author: Alexander Lakhin
Discussion: https://postgr.es/m/ae9f2fcb-4b24-5bb0-4240-efbbbd944ca1@gmail.com
|
|
fefd9a3fed turned tail recursion of CommitTransactionCommand() and
AbortCurrentTransaction() into iteration. However, it splits the handling of
cases between different functions.
This commit puts the handling of all the cases into
AbortCurrentTransactionInternal() and CommitTransactionCommandInternal().
Now CommitTransactionCommand() and AbortCurrentTransaction() are just doing
the repeated calls of internal functions.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20240415224834.w6piwtefskoh32mv%40awork3.anarazel.de
Author: Andres Freund
|
|
This commit reverts 06c418e163, e37662f221, bf1e650806, 25f42429e2,
ee79928441, and 74eaf66f98 per review by Heikki Linnakangas.
Discussion: https://postgr.es/m/b155606b-e744-4218-bda5-29379779da1a%40iki.fi
|
|
In one multixact.c edge case, we need a mechanism to wait for one
multixact offset to be written before being allowed to read the next
one. We used to handle this case by sleeping for one millisecond and
retrying, but such sleeps have been reported as problematic in
production cases. We can avoid the problem by using a condition
variable: readers sleep on it and then every creator of multixacts
broadcasts into the CV when creation is sufficiently far along.
Author: Kyotaro Horiguchi <horikyotajntt@gmail.com>
Reviewed-by: Andrey Borodin <amborodin@acm.org>
Discussion: https://postgr.es/m/47A598F4-B4E7-4029-8FEC-A06A6C3CB4B5@yandex-team.ru
Discussion: https://postgr.es/m/20200515.090333.24867479329066911.horikyota.ntt
|
|
This tracks the position of WAL that's been fully copied into WAL
buffers by all processes emitting WAL. (For some reason we call that
"WAL insertion"). This is updated using atomic monotonic advance during
WaitXLogInsertionsToFinish, which is not when the insertions actually
occur, but it's the only place where we know where have all the
insertions have completed.
This value is useful in WALReadFromBuffers, which can verify that
callers don't try to read past what has been inserted. (However, more
infrastructure is needed in order to actually use WAL after the flush
point, since it could be lost.)
The value is also useful in WaitXLogInsertionsToFinish() itself, since
we can now exit quickly when all WAL has been already inserted, without
even having to take any locks.
|
|
Even though waiting for replay LSN happens without explicit transaction,
AbortTransaction() is responsible for the cleanup of the shared memory if
the error is thrown in a stored procedure. So, we need to do WaitLSNCleanup()
there to clean up after some unexpected error happened while waiting for
replay LSN.
Discussion: https://postgr.es/m/202404051815.eri4u5q6oj26%40alvherre.pgsql
Author: Alvaro Herrera
|
|
This removes the need to hold both the info_lck spinlock and
WALWriteLock to update them. We use stock atomic write instead, with
WALWriteLock held. Readers can use atomic read, without any locking.
This allows for some code to be reordered: some places were a bit
contorted to avoid repeated spinlock acquisition, but that's no longer a
concern, so we can turn them to more natural coding. Some further
changes are possible (maybe to performance wins), but in this commit I
did rather minimal ones only, to avoid increasing the blast radius.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Reviewed-by: Andres Freund <andres@anarazel.de> (earlier versions)
Discussion: https://postgr.es/m/20200831182156.GA3983@alvherre.pgsql
|
|
After this change we have XLogCtl->logWriteResult and ->logFlushResult.
There's no functional change, other than the fact that the assignment
from shared memory to local is no longer done via struct assignment, but
instead using a macro that copies each member separately.
The current representation is inconvenient going forward; notably, we
would like to add a new member "Copy" (to keep track of the last
position copied into WAL buffers), so the symmetry between the values in
shared memory vs. those in local would be lost.
This also gives us freedom to later change the concurrency model for the
values in shared memory: we can make them use atomics instead of relying
on the info_lck spinlock.
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/202404031119.cd2kugjk2vho@alvherre.pgsql
|
|
06c418e163 introduced pg_wal_replay_wait() procedure allowing to wait for
the particular LSN to be replayed on standby. The waiters were stored in
the flat array. Even though scanning small arrays is fast, that might be a
problem at scale (a lot of waiting processes).
This commit replaces the flat shared memory array with the pairing heap,
which holds the waiter with the least LSN at the top. This gives us O(log N)
complexity for both inserting and removing waiters.
Reported-by: Alvaro Herrera
Discussion: https://postgr.es/m/202404030658.hhj3vfxeyhft%40alvherre.pgsql
|
|
This adds errcodes to a set of PANIC and FATAL errors in xlog.c
and relcache.c, which previously had no errcode at all set, in
order to make fleetwide analysis of errorlogs easier. There are
many more ereport/elogs left which could benefit from having an
errcode but this at least makes a dent in the issue.
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAN55FZ1k8LgLEqncPGmz_fWnrobV6bjABOTH4tOWta6xNcPQig@mail.gmail.com
|
|
pg_wal_replay_wait() is to be used on standby and specifies waiting for
the specific WAL location to be replayed before starting the transaction.
This option is useful when the user makes some data changes on primary and
needs a guarantee to see these changes on standby.
The queue of waiters is stored in the shared memory array sorted by LSN.
During replay of WAL waiters whose LSNs are already replayed are deleted from
the shared memory array and woken up by setting of their latches.
pg_wal_replay_wait() needs to wait without any snapshot held. Otherwise,
the snapshot could prevent the replay of WAL records implying a kind of
self-deadlock. This is why it is only possible to implement
pg_wal_replay_wait() as a procedure working in a non-atomic context,
not a function.
Catversion is bumped.
Discussion: https://postgr.es/m/eb12f9b03851bb2583adab5df9579b4b%40postgrespro.ru
Author: Kartyshov Ivan, Alexander Korotkov
Reviewed-by: Michael Paquier, Peter Eisentraut, Dilip Kumar, Amit Kapila
Reviewed-by: Alexander Lakhin, Bharath Rupireddy, Euler Taveira
|
|
Allow use of BeginInternalSubTransaction() in parallel mode, so long
as the subtransaction doesn't attempt to acquire an XID or increment
the command counter. Given those restrictions, the other parallel
processes don't need to know about the subtransaction at all, so
this should be safe. The benefit is that it allows subtransactions
intended for error recovery, such as pl/pgsql exception blocks,
to be used in PARALLEL SAFE functions.
Another reason for doing this is that the API of
BeginInternalSubTransaction() doesn't allow reporting failure.
pl/python for one, and perhaps other PLs, copes very poorly with an
error longjmp out of BeginInternalSubTransaction(). The headline
feature of this patch removes the only easily-triggerable failure
case within that function. There remain some resource-exhaustion
and similar cases, which we now deal with by promoting them to FATAL
errors, so that callers need not try to clean up. (It is likely
that such errors would leave us with corrupted transaction state
inside xact.c, making recovery difficult if not impossible anyway.)
Although this work started because of a report of a pl/python crash,
we're not going to do anything about that in the back branches.
Back-patching this particular fix is obviously not very wise.
While we could contemplate some narrower band-aid, pl/python is
already an untrusted language, so it seems okay to classify this
as a "so don't do that" case.
Patch by me, per report from Hao Zhang. Thanks to Robert Haas for
review.
Discussion: https://postgr.es/m/CALY6Dr-2yLVeVPhNMhuBnRgOZo1UjoTETgtKBx1B2gUi8yy+3g@mail.gmail.com
|
|
Similar to commit 7e735035f20.
Author: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAMbWs4-WhpCFMbXCjtJ%2BFzmjfPrp7Hw1pk4p%2BZpU95Kh3ofZ1A%40mail.gmail.com
|
|
Two FATALs and one PANIC gain details about the LSNs they fail at:
- When restoring from a backup_label, the FATAL log generated when not
finding the checkpoint record now reports its LSN.
- When restoring from a backup_label, the FATAL log generated when not
finding the redo record referenced by a checkpoint record now shows both
the redo and checkpoint record LSNs.
- When not restoring from a backup_label, the PANIC error generated when
not finding the checkpoint record now reports its LSN.
This information is useful when debugging corruption issues, and these
LSNs may not show up in the logs depending on the level of logging
configured in the backend.
Author: David Steele
Discussion: https://postgr.es/m/0e90da89-77ca-4ccf-872c-9626d755e288@pgmasters.net
|
|
The function recurses, but didn't perform stack-depth checks. It's
just a debugging aid, so instead of the usual check_stack_depth()
call, stop the printing if we'd risk stack overflow.
Here's an example of how to test this:
(n=1000000; printf "BEGIN;"; for ((i=1;i<=$n;i++)); do printf "SAVEPOINT s$i;"; done; printf "SET log_min_messages = 'DEBUG5'; SAVEPOINT sp;") | psql >/dev/null
In the passing, swap building the list of child XIDs and recursing to
parent. That saves memory while recursing, reducing the risk of out of
memory errors with lots of subtransactions. The saving is not very
significant in practice, but this order seems more logical anyway.
Report by Egor Chindyaskin and Alexander Lakhin.
Discussion: https://www.postgresql.org/message-id/1672760457.940462079%40f306.i.mail.ru
Author: Heikki Linnakangas
Reviewed-by: Robert Haas, Andres Freund, Alexander Korotkov
|
|
Usually the compiler will optimize away the tail recursion anyway, but
if it doesn't, you can drive the function into stack overflow. For
example:
(n=1000000; printf "BEGIN;"; for ((i=1;i<=$n;i++)); do printf "SAVEPOINT s$i;"; done; printf "ERROR; COMMIT;") | psql >/dev/null
In order to get better readability and less changes to the existing code the
recursion-replacing loop is implemented as a wrapper function.
Report by Egor Chindyaskin and Alexander Lakhin.
Discussion: https://postgr.es/m/1672760457.940462079%40f306.i.mail.ru
Author: Alexander Korotkov, Heikki Linnakangas
|
|
Remove an extra & operator, per Tom Lane. My bugs, introduced with
commit 53c2a97a9266.
Discussion: https://postgr.es/m/3885480.1709590472@sss.pgh.pa.us
|
|
When this code was written the duplicity didn't matter, but with all the
SLRU-bank stuff we just added, it has become excessive. Turn it into a
simpler loop with no code duplication. Also add a test so that this
code becomes covered.
Discussion: https://postgr.es/m/202403041517.3a35jw53os65@alvherre.pgsql
|
|
After commit 53c2a97a9266, the code flow around the "retry" goto label
in GetMultiXactIdMembers was confused about what was possible: we never
return there with a held lock, so there's no point in testing for one.
This realization lets us simplify the code a bit. While at it, make the
scope of a couple of local variables in the same function a bit tighter.
Per Coverity.
|
|
New code in 53c2a97a9266 uses direct array access to
shared->bank_locks[bankno].lock which can be made a little bit more
legible by using the SimpleLruGetBankLock helper function.
Nothing terribly serious, but let's add some clarity.
Discussion: https://postgr.es/m/202403041517.3a35jw53os65@alvherre.pgsql
|
|
as determined by include-what-you-use (IWYU)
While IWYU also suggests to *add* a bunch of #include's (which is its
main purpose), this patch does not do that. In some cases, a more
specific #include replaces another less specific one.
Some manual adjustments of the automatic result:
- IWYU currently doesn't know about includes that provide global
variable declarations (like -Wmissing-variable-declarations), so
those includes are being kept manually.
- All includes for port(ability) headers are being kept for now, to
play it safe.
- No changes of catalog/pg_foo.h to catalog/pg_foo_d.h, to keep the
patch from exploding in size.
Note that this patch touches just *.c files, so nothing declared in
header files changes in hidden ways.
As a small example, in src/backend/access/transam/rmgr.c, some IWYU
pragma annotations are added to handle a special case there.
Discussion: https://www.postgresql.org/message-id/flat/af837490-6b2f-46df-ba05-37ea6a6653fc%40eisentraut.org
|
|
The pid was originally used in error context of messages propagated
from parallel workers, but commit 292794f82b removed that. If the need
arises in the future, you can also get the pid with
"shm_mq_get_sender(pcxt->worker[i].error_mqh)->pid".
|
|
This test serves as a way to demonstrate how to use the features
introduced in 37b369dc67bc, while providing coverage for 7863ee4def65
that caused the startup process to throw "PANIC: could not locate a
valid checkpoint record" when starting recovery. The test checks that a
node is able to properly restart following a crash when a restart point
was finishing across a promotion, with an injection point added in the
middle of CreateRestartPoint() to stop the restartpoint in flight. Note
that this test fails when 7863ee4def65 is reverted.
Kyotaro Horiguchi is the original author of this test, that has been
originally posted on the thread where 7863ee4def65 was discussed. I
have just upgraded and polished it to rely on injection points, making
it much cheaper to reproduce the failure.
This test requires injection points to be enabled in the builds, hence
meson and ./configure need an update to pass this knowledge down to the
test. The name of the new injection point follows the same naming
convention as 6a1ea02c491d. The Makefile's EXTRA_INSTALL of recovery
TAP tests is updated to include modules/injection_points.
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: Andrey Borodin, Bertrand Drouvot
Discussion: https://postgr.es/m/ZdLuxBk5hGpol91B@paquier.xyz
|
|
Now that BackendId was just another index into the proc array, it was
redundant with the 0-based proc numbers used in other places. Replace
all usage of backend IDs with proc numbers.
The only place where the term "backend id" remains is in a few pgstat
functions that expose backend IDs at the SQL level. Those IDs are now
in fact 0-based ProcNumbers too, but the documentation still calls
them "backend ids". That term still seems appropriate to describe what
the numbers are, so I let it be.
One user-visible effect is that pg_temp_0 is now a valid temp schema
name, for backend with ProcNumber 0.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
|
|
Previously, backend ID was an index into the ProcState array, in the
shared cache invalidation manager (sinvaladt.c). The entry in the
ProcState array was reserved at backend startup by scanning the array
for a free entry, and that was also when the backend got its backend
ID. Things become slightly simpler if we redefine backend ID to be the
index into the PGPROC array, and directly use it also as an index to
the ProcState array. This uses a little more memory, as we reserve a
few extra slots in the ProcState array for aux processes that don't
need them, but the simplicity is worth it.
Aux processes now also have a backend ID. This simplifies the
reservation of BackendStatusArray and ProcSignal slots.
You can now convert a backend ID into an index into the PGPROC array
simply by subtracting 1. We still use 0-based "pgprocnos" in various
places, for indexes into the PGPROC array, but the only difference now
is that backend IDs start at 1 while pgprocnos start at 0. (The next
commmit will get rid of the term "backend ID" altogether and make
everything 0-based.)
There is still a 'backendId' field in PGPROC, now part of 'vxid' which
encapsulates the backend ID and local transaction ID together. It's
needed for prepared xacts. For regular backends, the backendId is
always equal to pgprocno + 1, but for prepared xact PGPROC entries,
it's the ID of the original backend that processed the transaction.
Reviewed-by: Andres Freund, Reid Thompson
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
|
|
Currently, this variable is an XLogRecPtr protected by a spinlock.
By converting it to an atomic variable, we can remove the spinlock,
which saves a small amount of shared memory space. Since this code
is not performance-critical, we use atomic operations with full
barrier semantics to make it easy to reason about correctness.
Author: John Morris
Reviewed-by: Michael Paquier, Robert Haas, Andres Freund, Stephen Frost, Bharath Rupireddy
Discussion: https://postgr.es/m/BYAPR13MB26772534335255E50318C574A0409%40BYAPR13MB2677.namprd13.prod.outlook.com
Discussion: https://postgr.es/m/MN2PR13MB2688FD8B757316CB5C54C8A2A0DDA%40MN2PR13MB2688.namprd13.prod.outlook.com
|
|
Ensure to set always-secure search path for both local and remote
connections during slot synchronization, so that malicious users can't
redirect user code (e.g. operators).
In the passing, improve the name of define, remove spurious return
statement, and a minor change in one of the comments.
Author: Bertrand Drouvot and Shveta Malik
Reviewed-by: Amit Kapila, Peter Smith
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
Discussion: https://postgr.es/m/ZdcejBDCr+wlVGnO@ip-10-97-1-34.eu-west-3.compute.internal
Discussion: https://postgr.es/m/CAJpy0uBNP=nrkNJkJSfF=jSocEh8vU2Owa8Rtpi=63fG=SvfVQ@mail.gmail.com
|
|
More precisely, what we do here is make the SLRU cache sizes
configurable with new GUCs, so that sites with high concurrency and big
ranges of transactions in flight (resp. multixacts/subtransactions) can
benefit from bigger caches. In order for this to work with good
performance, two additional changes are made:
1. the cache is divided in "banks" (to borrow terminology from CPU
caches), and algorithms such as eviction buffer search only affect
one specific bank. This forestalls the problem that linear searching
for a specific buffer across the whole cache takes too long: we only
have to search the specific bank, whose size is small. This work is
authored by Andrey Borodin.
2. Change the locking regime for the SLRU banks, so that each bank uses
a separate LWLock. This allows for increased scalability. This work
is authored by Dilip Kumar. (A part of this was previously committed as
d172b717c6f4.)
Special care is taken so that the algorithms that can potentially
traverse more than one bank release one bank's lock before acquiring the
next. This should happen rarely, but particularly clog.c's group commit
feature needed code adjustment to cope with this. I (Álvaro) also added
lots of comments to make sure the design is sound.
The new GUCs match the names introduced by bcdfa5f2e2f2 in the
pg_stat_slru view.
The default values for these parameters are similar to the previous
sizes of each SLRU. commit_ts, clog and subtrans accept value 0, which
means to adjust by dividing shared_buffers by 512 (so 2MB for every 1GB
of shared_buffers), with a cap of 8MB. (A new slru.c function
SimpleLruAutotuneBuffers() was added to support this.) The cap was
previously 1MB for clog, so for sites with more than 512MB of shared
memory the total memory used increases, which is likely a good tradeoff.
However, other SLRUs (notably multixact ones) retain smaller sizes and
don't support a configured value of 0. These values based on
shared_buffers may need to be revisited, but that's an easy change.
There was some resistance to adding these new GUCs: it would be better
to adjust to memory pressure automatically somehow, for example by
stealing memory from shared_buffers (where the caches can grow and
shrink naturally). However, doing that seems to be a much larger
project and one which has made virtually no progress in several years,
and because this is such a pain point for so many users, here we take
the pragmatic approach.
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Amul Sul, Gilles Darold, Anastasia Lubennikova,
Ivan Lazarev, Robert Haas, Thomas Munro, Tomas Vondra,
Yura Sokolov, Васильев Дмитрий (Dmitry Vasiliev).
Discussion: https://postgr.es/m/2BEC2B3F-9B61-4C1D-9FB5-5FAB0F05EF86@yandex-team.ru
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
|
|
The new names are intended to match those in an upcoming patch that adds
a few GUCs to configure the SLRU buffer sizes.
Backwards compatibility concern: this changes the accepted names for
function pg_stat_slru_rest(). Since this function recognizes "any other
string" as a request to reset the entry for "other", this means that
calling it with the old names would silently reset "other" instead of
doing nothing or throwing an error.
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/202402261616.dlriae7b6emv@alvherre.pgsql
|
|
Pretty boring.
|
|
By enabling slot synchronization, all the failover logical replication
slots on the primary (assuming configurations are appropriate) are
automatically created on the physical standbys and are synced
periodically. The slot sync worker on the standby server pings the primary
server at regular intervals to get the necessary failover logical slots
information and create/update the slots locally. The slots that no longer
require synchronization are automatically dropped by the worker.
The nap time of the worker is tuned according to the activity on the
primary. The slot sync worker waits for some time before the next
synchronization, with the duration varying based on whether any slots were
updated during the last cycle.
A new parameter sync_replication_slots enables or disables this new
process.
On promotion, the slot sync worker is shut down by the startup process to
drop any temporary slots acquired by the slot sync worker and to prevent
the worker from trying to fetch the failover slots.
A functionality to allow logical walsenders to wait for the physical will
be done in a subsequent commit.
Author: Shveta Malik, Hou Zhijie based on design inputs by Masahiko Sawada and Amit Kapila
Reviewed-by: Masahiko Sawada, Bertrand Drouvot, Peter Smith, Dilip Kumar, Ajin Cherian, Nisha Moond, Kuroda Hayato, Amit Kapila
Discussion: https://postgr.es/m/514f6f2f-6833-4539-39f1-96cd1e011f23@enterprisedb.com
|
|
It was always just the index of the PGPROC entry from the beginning of
the proc array. Introduce a macro to compute it from the pointer
instead.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/8171f1aa-496f-46a6-afc3-c46fe7a9b407@iki.fi
|
|
Previously, some callers requested XLOG_BLCKSZ bytes
unconditionally. While this did not cause a problem, because the extra
bytes are ignored, it's confusing and makes it harder to add safety
checks. Additionally, the comment about zero padding was incorrect.
With this commit, all callers request the number of bytes they
actually need.
Author: Bharath Rupireddy
Reviewed-by: Kyotaro Horiguchi
Discussion: https://postgr.es/m/CALj2ACWBRFac2TingD3PE3w2EBHXUHY3=AEEZPJmqhpEOBGExg@mail.gmail.com
|
|
Per suggestion from Andres.
Discussion: https://postgr.es/m/20240214025508.6mcblauossthvaw3@awork3.anarazel.de
|
|
Don't deal with transaction timeout in PostgresMain(). Instead, release
transaction timeout activated by StartTransaction() in
CommitTransaction()/AbortTransaction()/PrepareTransaction(). Deal with both
enabling and disabling transaction timeout in assign_transaction_timeout().
Also, remove potentially flaky timeouts-long isolation test, which has no
guarantees to pass on slow/busy machines.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20240215230856.pc6k57tqxt7fhldm%40awork3.anarazel.de
|
|
This commit adds timeout that is expected to be used as a prevention
of long-running queries. Any session within the transaction will be
terminated after spanning longer than this timeout.
However, this timeout is not applied to prepared transactions.
Only transactions with user connections are affected.
Discussion: https://postgr.es/m/CAAhFRxiQsRs2Eq5kCo9nXE3HTugsAAJdSQSmxncivebAxdmBjQ%40mail.gmail.com
Author: Andrey Borodin <amborodin@acm.org>
Author: Japin Li <japinli@hotmail.com>
Author: Junwang Zhao <zhjwpku@gmail.com>
Reviewed-by: Nikolay Samokhvalov <samokhvalov@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: bt23nguyent <bt23nguyent@oss.nttdata.com>
Reviewed-by: Yuhang Qiu <iamqyh@gmail.com>
|
|
If available, read directly from WAL buffers, avoiding the need to go
through the filesystem. Only for physical replication for now, but can
be expanded to other callers.
In preparation for replicating unflushed WAL data.
Author: Bharath Rupireddy
Discussion: https://postgr.es/m/CALj2ACXKKK%3DwbiG5_t6dGao5GoecMwRkhr7GjVBM_jg54%2BNa%3DQ%40mail.gmail.com
Reviewed-by: Andres Freund, Alvaro Herrera, Nathan Bossart, Dilip Kumar, Nitin Jadhav, Melih Mutlu, Kyotaro Horiguchi
|
|
This only matters when using atomics emulation with semaphores.
Per buildfarm member rorqual.
|
|
The new concurrency model proposed for slru.c to improve performance
does not include any single lock that would coordinate processes
doing concurrent reads/writes on SlruShared->latest_page_number.
We can instead use atomic reads and writes for that variable.
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/CAFiTN-vzDvNz=ExGXz6gdyjtzGixKSqs0mKHMmaQ8sOSEFZ33A@mail.gmail.com
|
|
After calling smgropen(), it was not clear how long you could continue
to use the result, because various code paths including cache
invalidation could call smgrclose(), which freed the memory.
Guarantee that the object won't be destroyed until the end of the
current transaction, or in recovery, the commit/abort record that
destroys the underlying storage.
smgrclose() is now just an alias for smgrrelease(). It closes files
and forgets all state except the rlocator, but keeps the SMgrRelation
object valid.
A new smgrdestroy() function is used by rare places that know there
should be no other references to the SMgrRelation.
The short version:
* smgrclose() is now just an alias for smgrrelease(). It releases
resources, but doesn't destroy until EOX
* smgrdestroy() now frees memory, and should rarely be used.
Existing code should be unaffected, but it is now possible for code that
has an SMgrRelation object to use it repeatedly during a transaction as
long as the storage hasn't been physically dropped. Such code would
normally hold a lock on the relation.
This also replaces the "ownership" mechanism of SMgrRelations with a
pin counter. An SMgrRelation can now be "pinned", which prevents it
from being destroyed at end of transaction. There can be multiple pins
on the same SMgrRelation. In practice, the pin mechanism is only used
by the relcache, so there cannot be more than one pin on the same
SMgrRelation. Except with swap_relation_files XXX
Author: Thomas Munro, Heikki Linnakangas
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://www.postgresql.org/message-id/CA%2BhUKGJ8NTvqLHz6dqbQnt2c8XCki4r2QvXjBQcXpVwxTY_pvA@mail.gmail.com
|
|
Three LOG messages are added in the recovery code paths, providing
information that can be useful to track corruption issues depending on
the state of the cluster, telling that:
- Recovery has started from a backup_label.
- Recovery is restarting from a backup start LSN, without a
backup_label.
- Recovery has completed from a backup.
Author: Andres Freund
Reviewed-by: David Steele, Laurenz Albe, Michael Paquier
Discussion: https://postgr.es/m/20231117041811.vz4vgkthwjnwp2pp@awork3.anarazel.de
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
