| Age | Commit message (Collapse) | Author |
|---|
|
This commit just does the minimal wiring up of the AIO subsystem, added in the
next commit, to the rest of the system. The next commit contains more details
about motivation and architecture.
This commit is kept separate to make it easier to review, separating the
changes across the tree, from the implementation of the new subsystem.
We discussed squashing this commit with the main commit before merging AIO,
but there has been a mild preference for keeping it separate.
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/uvrtrknj4kdytuboidbhwclo4gxhswwcpgadptsjvjqcluzmah%40brqs62irg4dt
|
|
This reverts commit b860848232aa, that was added as a prerequisite for
the support of pgstats data flush across checkpoints, linking a pgstats
file to a specific checkpoint redo LSN.
As reported, this is proving to be currently problematic when going
through a pg_upgrade, that does direct manipulations of the control file
in the new cluster. The LSN stored in the pgstats file is not able to
cope with any changes done in the control file by pg_upgrade yet,
causing the pgstats file to be discarded when starting the new cluster
after overriding its redo LSN (one is a `pg_resetwal -l` where the new
cluster's start LSN is bumped by a hardcoded value of 8 segments, see
copy_xact_xlog_xid).
The least painful path going forward is likely going to be a refactor of
the pgstats code so as it is possible to read and write some of its data
with some routines in src/common/, so as pg_upgrade or pg_resetwal are
able to update its data. The main point is that we are going to need a
LSN in the stats file should we make it written at checkpoint time and
not only as part of a shutdown sequence. It is too late to dive into
these details for v18, so let's revert the change, and let's try to
figure out all the details in the next release cycle. The pgstats file
is currently only written as part of a shutdown sequence, and its
contents are still lost on crash, same as older releases.
Bump PGSTAT_FILE_FORMAT_ID.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2563883.1741826489@sss.pgh.pa.us
|
|
We want to support a "noreturn" decoration on more compilers besides
just GCC-compatible ones, but for that we need to move the decoration
in front of the function declaration instead of either behind it or
wherever, which is the current style afforded by GCC-style attributes.
Also rename the macro to "pg_noreturn" to be similar to the C11
standard "noreturn".
pg_noreturn is now supported on all compilers that support C11 (using
_Noreturn), as well as GCC-compatible ones (using __attribute__, as
before), as well as MSVC (using __declspec). (When PostgreSQL
requires C11, the latter two variants can be dropped.)
Now, all supported compilers effectively support pg_noreturn, so the
extra code for !HAVE_PG_ATTRIBUTE_NORETURN can be dropped.
This also fixes a possible problem if third-party code includes
stdnoreturn.h, because then the current definition of
#define pg_attribute_noreturn() __attribute__((noreturn))
would cause an error.
Note that the C standard does not support a noreturn attribute on
function pointer types. So we have to drop these here. There are
only two instances at this time, so it's not a big loss. In one case,
we can make up for it by adding the pg_noreturn to a wrapper function
and adding a pg_unreachable(), in the other case, the latter was
already done before.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/pxr5b3z7jmkpenssra5zroxi7qzzp6eswuggokw64axmdixpnk@zbwxuq7gbbcw
|
|
The usual pattern for handling a signal is that the signal handler
sets a flag and calls SetLatch(MyLatch), and CHECK_FOR_INTERRUPTS() or
other code that is part of a wait loop calls another function to deal
with it. The naming of the functions involved was a bit inconsistent,
however. CHECK_FOR_INTERRUPTS() calls ProcessInterrupts() to do the
heavy-lifting, but the analogous functions in aux processes were
called HandleMainLoopInterrupts(), HandleStartupProcInterrupts(),
etc. Similarly, most subroutines of ProcessInterrupts() were called
Process*(), but some were called Handle*().
To make things less confusing, rename all the functions that are part
of the overall signal/interrupt handling system but are not executed
in a signal handler to e.g. ProcessSomething(), rather than
HandleSomething(). The "Process" prefix is now consistently used in
the non-signal-handler functions, and the "Handle" prefix in functions
that are part of signal handlers, except for some completely unrelated
functions that clearly have nothing to do with signal or interrupt
handling.
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/8a384b26-1499-41f6-be33-64b801fb98b8@iki.fi
|
|
Commit bc971f4025 replaced the latch-setting mechanism that the
comment talked about with a condition variable. And before that,
commit 2258e76f90 moved the code so that the comment got detached from
the loop that it talked about, so move the comment closer to the loop.
|
|
Allow using parallel workers to build a GIN index, similarly to BTREE
and BRIN. For large tables this may result in significant speedup when
the build is CPU-bound.
The work is divided so that each worker builds index entries on a subset
of the table, determined by the regular parallel scan used to read the
data. Each worker uses a local tuplesort to sort and merge the entries
for the same key. The TID lists do not overlap (for a given key), which
means the merge sort simply concatenates the two lists. The merged
entries are written into a shared tuplesort for the leader.
The leader needs to merge the sorted entries again, before writing them
into the index. But this way a significant part of the work happens in
the workers, and the leader is left with merging fewer large entries,
which is more efficient.
Most of the parallelism infrastructure is a simplified copy of the code
used by BTREE indexes, omitting the parts irrelevant for GIN indexes
(e.g. uniqueness checks).
Original patch by me, with reviews and substantial improvements by
Matthias van de Meent, certainly enough to make him a co-author.
Author: Tomas Vondra, Matthias van de Meent
Reviewed-by: Matthias van de Meent, Andy Fan, Kirill Reshke
Discussion: https://postgr.es/m/6ab4003f-a8b8-4d75-a67f-f25ad98582dc%40enterprisedb.com
|
|
The original message did not mention where the checkpoint record LSN was
found, a control file or a backup_label file. A couple of LOG messages
are generated before this FATAL check is reached, providing more details
about the way recovery is set up. However, knowing this information in
this specific message is useful for debugging. This is also useful for
instances where log_min_messages is set to FATAL or more, where LOG
messages do not show up.
Author: Benoit Lobréau <benoit.lobreau@dalibo.com>
Reviewed-by: David Steele <david@pgbackrest.org>
Discussion: https://postgr.es/m/4ed10bc8-5513-4d8e-8643-8abcaa08336d@dalibo.com
|
|
This commit is a rework of 2421e9a51d20, about which Andres Freund has
raised some concerns as it is valuable to have both track_io_timing and
track_wal_io_timing in some cases, as the WAL write and fsync paths can
be a major bottleneck for some workloads. Hence, it can be relevant to
not calculate the WAL timings in environments where pg_test_timing
performs poorly while capturing some IO data under track_io_timing for
the non-WAL IO paths. The opposite can be also true: it should be
possible to disable the non-WAL timings and enable the WAL timings (the
previous GUC setups allowed this possibility).
track_wal_io_timing is added back in this commit, controlling if WAL
timings should be calculated in pg_stat_io for the read, fsync and write
paths, as done previously with pg_stat_wal. pg_stat_wal previously
tracked only the sync and write parts (now removed), read stats is new
data tracked in pg_stat_io, all three are aggregated if
track_wal_io_timing is enabled. The read part matters during recovery
or if a XLogReader is used.
Extra note: more control over if the types of timings calculated in
pg_stat_io could be done with a GUC that lists pairs of (IOObject,IOOp).
Reported-by: Andres Freund <andres@anarazel.de>
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/3opf2wh2oljco6ldyqf7ukabw3jijnnhno6fjb4mlu6civ5h24@fcwmhsgmlmzu
|
|
For AIO, and also some other recent patches, we need the ability to call
relpath() in a critical section. Until now that was not feasible, as it
allocated memory.
The fact that relpath() allocated memory also made it awkward to use in log
messages because we had to take care to free the memory afterwards. Which we
e.g. didn't do for when zeroing out an invalid buffer.
We discussed other solutions, e.g. filling a pre-allocated buffer that's
passed to relpath(), but they all came with plenty downsides or were larger
projects. The easiest fix seems to be to make relpath() return the path by
value.
To be able to return the path by value we need to determine the maximum length
of a relation path. This patch adds a long #define that computes the exact
maximum, which is verified to be correct in a regression test.
As this change the signature of relpath(), extensions using it will need to
adapt their code. We discussed leaving a backward-compat shim in place, but
decided it's not worth it given the use of relpath() doesn't seem widespread.
Discussion: https://postgr.es/m/xeri5mla4b5syjd5a25nok5iez2kr3bm26j2qn4u7okzof2bmf@kwdh2vf7npra
|
|
The four following attributes are removed from pg_stat_wal:
* wal_write
* wal_sync
* wal_write_time
* wal_sync_time
a051e71e28a1 has added an equivalent of this information in pg_stat_io
with more granularity as this now spreads across the backend types, IO
context and IO objects. So, keeping the same information in pg_stat_wal
has little benefits.
Another benefit of this commit is the removal of PendingWalStats,
simplifying an upcoming patch to add per-backend WAL statistics, which
already support IO statistics and which have access to the write/sync
stats data of WAL.
The GUC track_wal_io_timing, that was used to enable or disable the
aggregation of the write and sync timings for WAL, is also removed.
pgstat_prepare_io_time() is simplified.
Bump catalog version.
Bump PGSTAT_FILE_FORMAT_ID, due to the update of PgStat_WalStats.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/Z7RkQ0EfYaqqjgz/@ip-10-97-1-34.eu-west-3.compute.internal
|
|
The signedness of the 'char' type in C is
implementation-dependent. For instance, 'signed char' is used by
default on x86 CPUs, while 'unsigned char' is used on aarch
CPUs. Previously, we accidentally let C implementation signedness
affect persistent data. This led to inconsistent results when
comparing char data across different platforms.
This commit introduces a new 'default_char_signedness' field in
ControlFileData to store the signedness of the 'char' type. While this
change does not encourage the use of 'char' without explicitly
specifying its signedness, this field can be used as a hint to ensure
consistent behavior for pre-v18 data files that store data sorted by
the 'char' type on disk (e.g., GIN and GiST indexes), especially in
cross-platform replication scenarios.
Newly created database clusters unconditionally set the default char
signedness to true. pg_upgrade (with an upcoming commit) changes this
flag for clusters if the source database cluster has
signedness=false. As a result, signedness=false setting will become
rare over time. If we had known about the problem during the last
development cycle that forced initdb (v8.3), we would have made all
clusters signed or all clusters unsigned. Making pg_upgrade the only
source of signedness=false will cause the population of database
clusters to converge toward that retrospective ideal.
Bump catalog version (for the catalog changes) and PG_CONTROL_VERSION
(for the additions in ControlFileData).
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/CB11ADBC-0C3F-4FE0-A678-666EE80CBB07%40amazon.com
|
|
Remove a number of (char *) casts that are unnecessary. Or in some
cases, rewrite the code to make the purpose of the cast clearer.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/fd1fcedb-3492-4fc8-9e3e-74b97f2db6c7%40eisentraut.org
|
|
If the requested recovery timeline is not reachable, the logged
checkpoint and timeline should to be the values read from the
backup_label when it is defined. The message generated used the values
from the control file in this case, which is fine when recovering from
the control file without a backup_label, but not if there is a
backup_label.
Issue introduced in ee994272ca50. v15 has introduced xlogrecovery.c and
more simplifications in this area (4a92a1c3d1c3, a27048cbcb58), making
this change a bit simpler to think about, so backpatch only down to this
version.
Author: David Steele <david@pgbackrest.org>
Reviewed-by: Andrey M. Borodin <x4mmm@yandex-team.ru>
Reviewed-by: Benoit Lobréau <benoit.lobreau@dalibo.com>
Discussion: https://postgr.es/m/c3d617d4-1696-4aa7-8a4d-5a7d19cc5618@pgbackrest.org
Backpatch-through: 15
|
|
This commit introduces idle_replication_slot_timeout GUC that allows
inactive slots to be invalidated at the time of checkpoint. Because
checkpoints happen checkpoint_timeout intervals, there can be some lag
between when the idle_replication_slot_timeout was exceeded and when the
slot invalidation is triggered at the next checkpoint. To avoid such lags,
users can force a checkpoint to promptly invalidate inactive slots.
Note that the idle timeout invalidation mechanism is not applicable for
slots that do not reserve WAL or for slots on the standby server that are
synced from the primary server (i.e., standby slots having 'synced' field
'true'). Synced slots are always considered to be inactive because they
don't perform logical decoding to produce changes.
The slots can become inactive for a long period if a subscriber is down
due to a system error or inaccessible because of network issues. If such a
situation persists, it might be more practical to recreate the subscriber
rather than attempt to recover the node and wait for it to catch up which
could be time-consuming.
Then, external tools could create replication slots (e.g., for migrations
or upgrades) that may fail to remove them if an error occurs, leaving
behind unused slots that take up space and resources. Manually cleaning
them up can be tedious and error-prone, and without intervention, these
lingering slots can cause unnecessary WAL retention and system bloat.
As the duration of idle_replication_slot_timeout is in minutes, any test
using that would be time-consuming. We are planning to commit a follow up
patch for tests by using the injection point framework.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Discussion: https://postgr.es/m/CALj2ACW4aUe-_uFQOjdWCEN-xXoLGhmvRFnL8SNw_TZ5nJe+aw@mail.gmail.com
Discussion: https://postgr.es/m/OS0PR01MB5716C131A7D80DAE8CB9E88794FC2@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
|
This commit reverts 6a2275b895. Buildfarm failure on batta spots some
concurrency issue, which requires further investigation.
|
|
wal_buffers_full has been introduced in pg_stat_wal in 8d9a935965f, as
some information providing metrics for the tuning of the GUC
wal_buffers. WalUsage has been introduced before that in df3b181499.
Moving this field is proving to be beneficial for several reasons:
- This information can now be made available in more layers, providing
more granularity than just pg_stat_wal, on a per-query basis: EXPLAIN,
pgss and VACUUM/ANALYZE logs.
- A patch is under discussion to provide statistics for WAL at backend
level, and this move simplifies a bit the handling of pending
statistics. The remaining data in PgStat_PendingWalStats now relates to
write/sync counters and times, with equivalents present in pg_stat_io,
that backend statistics are able to already track. So this should cut
all the dependencies between PgStat_PendingWalStats and WAL stats at
backend level.
As of this change, wal_buffers_full only shows in pg_stat_wal.
Author: Bertrand Drouvot
Reviewed-by: Ilia Evdokimov
Discussion: https://postgr.es/m/Z6SOha5YFFgvpwQY@ip-10-97-1-34.eu-west-3.compute.internal
|
|
Allow multiple backends to initialize WAL buffers concurrently. This way
`MemSet((char *) NewPage, 0, XLOG_BLCKSZ);` can run in parallel without
taking a single LWLock in exclusive mode.
The new algorithm works as follows:
* reserve a page for initialization using XLogCtl->InitializeReserved,
* ensure the page is written out,
* once the page is initialized, try to advance XLogCtl->InitializedUpTo and
signal to waiters using XLogCtl->InitializedUpToCondVar condition
variable,
* repeat previous steps until we reserve initialization up to the target
WAL position,
* wait until concurrent initialization finishes using a
XLogCtl->InitializedUpToCondVar.
Now, multiple backends can, in parallel, concurrently reserve pages,
initialize them, and advance XLogCtl->InitializedUpTo to point to the latest
initialized page.
Author: Yura Sokolov <y.sokolov@postgrespro.ru>
Co-authored-by: Alexander Korotkov <aekorotkov@gmail.com>
Reviewed-by: Pavel Borisov <pashkin.elfe@gmail.com>
|
|
Commit a99cc6c6b4 introduced the PqMsg_Progress macro but missed
updating HandleParallelMessage() accordingly.
Backpatch-through: 17
|
|
Remove (char *) casts no longer needed after XLogRegisterData() and
XLogRegisterBufData() argument type change.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/fd1fcedb-3492-4fc8-9e3e-74b97f2db6c7%40eisentraut.org
|
|
Change XLogRegisterData() and XLogRegisterBufData() functions to take
void * for binary data instead of char *. This will remove the need
for numerous casts (done in a separate commit for clarity).
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/fd1fcedb-3492-4fc8-9e3e-74b97f2db6c7%40eisentraut.org
|
|
Remove (char *) casts around memory functions such as memcmp(),
memcpy(), or memset() where the cast is useless. Since these
functions don't take char * arguments anyway, these casts are at best
complicated casts to (void *), about which see commit 7f798aca1d5.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Discussion: https://www.postgresql.org/message-id/flat/fd1fcedb-3492-4fc8-9e3e-74b97f2db6c7%40eisentraut.org
|
|
This commit adds WAL IO stats to both pg_stat_io view and per-backend IO
statistics (pg_stat_get_backend_io()). This change is possible since
f92c854cf406, as WAL IO is not counted in blocks in some code paths
where its stats data is measured (like WAL read in xlogreader.c).
IOContext gains IOCONTEXT_INIT and IOObject IOOBJECT_WAL, with the
following combinations allowed:
- IOOBJECT_WAL/IOCONTEXT_NORMAL is used to track I/O operations done on
already-created WAL segments.
- IOOBJECT_WAL/IOCONTEXT_INIT is used for tracking I/O operations done
when initializing WAL segments.
The core changes are done in pg_stat_io.c, backend statistics inherit
them. Backend statistics and pg_stat_io are now available for the WAL
writer, the WAL receiver and the WAL summarizer processes.
I/O timing data is controlled by the GUC track_io_timing, like the
existing data of pg_stat_io for consistency. The timings related to
IOOBJECT_WAL show up if the GUC is enabled (disabled by default).
Bump pgstats file version, due to the additions in IOObject and
IOContext, impacting the amount of data written for the fixed-numbered
IO stats kind in the pgstats file.
Author: Nazir Bilal Yavuz
Reviewed-by: Bertrand Drouvot, Nitin Jadhav, Amit Kapila, Michael
Paquier, Melanie Plageman, Bharath Rupireddy
Discussion: https://postgr.es/m/CAN55FZ3AiQ+ZMxUuXnBpd0Rrh1YhwJ5FudkHg=JU0P+-W8T4Vg@mail.gmail.com
|
|
"recovery" is not a verb. Introduced in 68cb5af46cd8.
|
|
Assume twophase.c is the performance-sensitive caller, and preserve its
choice of unlikely() branch hint. Add some retrospective rationale for
that choice. Back-patch to v17, for the next commit to use it.
Reviewed (in earlier versions) by Michael Paquier.
Discussion: https://postgr.es/m/17821-dd8c334263399284@postgresql.org
Discussion: https://postgr.es/m/20250116010051.f3.nmisch@google.com
|
|
Discussion: https://www.postgresql.org/message-id/flat/692ee0da-49da-4d32-8dca-da224cc2800e@eisentraut.org
|
|
XLogPageRead() checks immediately for an invalid WAL record header on a
standby, to be able to handle the case of continuation records that need
to be read across two different sources. As written, the check was too
generic, applying to any target LSN. Based on an analysis by Kyotaro
Horiguchi, what really matters is to make sure that the page header is
checked when attempting to read a LSN at the boundary of a segment, to
handle the case of a continuation record that spawns across multiple
pages when dealing with multiple segments, as WAL receivers are spawned
they request WAL from the beginning of a segment. This fix has been
proposed by Kyotaro Horiguchi.
This could cause standbys to loop infinitely when dealing with a
continuation record during a timeline jump, in the case where the
contents of the record in the follow-up page are invalid.
Some regression tests are added to check such scenarios, able to
reproduce the original problem. In the test, the contents of a
continuation record are overwritten with junk zeros on its follow-up
page, and replayed on standbys. This is inspired by 039_end_of_wal.pl,
and is enough to show how standbys should react on promotion by not
being stuck. Without the fix, the test would fail with a timeout. The
test to reproduce the problem has been written by Alexander Kukushkin.
The original check has been introduced in 066871980183, for a similar
problem.
Author: Kyotaro Horiguchi, Alexander Kukushkin
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAFh8B=mozC+e1wGJq0H=0O65goZju+6ab5AU7DEWCSUA2OtwDg@mail.gmail.com
Backpatch-through: 13
|
|
This commit reverts 8f67f994e8ea (down to v13) and c3de0f9eed38 (down to
v17), as these are proving to not be completely correct regarding two
aspects:
- In v17 and newer branches, c3de0f9eed38's check for epoch handling is
incorrect, and does not correctly handle frozen epochs. A logic closer
to widen_snapshot_xid() should be used. The 2PC code should try to
integrate deeper with FullTransactionIds, 5a1dfde8334b being not enough.
- In v13 and newer branches, 8f67f994e8ea is a workaround for the real
issue, which is that we should not attempt CLOG lookups without reaching
consistency. This exists since 728bd991c3c4, and this is reachable with
ProcessTwoPhaseBuffer() called by restoreTwoPhaseData() at the beginning
of recovery.
Per discussion with Noah Misch.
Discussion: https://postgr.es/m/20250116010051.f3.nmisch@google.com
Backpatch-through: 13
|
|
The originally submitted code (using bit masking) was correct when the
number of slots was restricted to be a power of two -- but that
limitation was removed during development that led to commit
53c2a97a9266, which made the bank selection code incorrect. This led to
always using a smaller number of banks than available. Change said code
to use integer modulo instead, which works correctly with an arbitrary
number of banks.
It's likely that we could improve on this to avoid runtime use of
integer division. But with this change we're, at least, not wasting
memory on unused banks, and more banks mean less contention, which is
likely to have a much higher performance impact than a single
instruction's latency.
Author: Yura Sokolov <y.sokolov@postgrespro.ru>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/9444dc46-ca47-43ed-9058-89c456316306@postgrespro.ru
|
|
This commit introduces a new parameter named
autovacuum_worker_slots that controls how many autovacuum worker
slots to reserve during server startup. Modifying this new
parameter's value does require a server restart, but it should
typically be set to the upper bound of what you might realistically
need to set autovacuum_max_workers. With that new parameter in
place, autovacuum_max_workers can now be changed with a SIGHUP
(e.g., pg_ctl reload).
If autovacuum_max_workers is set higher than
autovacuum_worker_slots, a WARNING is emitted, and the server will
only start up to autovacuum_worker_slots workers at a given time.
If autovacuum_max_workers is set to a value less than the number of
currently-running autovacuum workers, the existing workers will
continue running, but no new workers will be started until the
number of running autovacuum workers drops below
autovacuum_max_workers.
Reviewed-by: Sami Imseih, Justin Pryzby, Robert Haas, Andres Freund, Yogesh Sharma
Discussion: https://postgr.es/m/20240410212344.GA1824549%40nathanxps13
|
|
Author: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/5812a0b9-b0cf-4151-9a14-d9f00e4f2858@gmail.com
|
|
Backpatch-through: 13
|
|
At the beginning of recovery, an orphaned two-phase file in an epoch
different than the one defined in the checkpoint record could not be
removed based on the assumptions that AdjustToFullTransactionId() relies
on, assuming that all files would be either from the current epoch or
from the previous epoch.
If the checkpoint epoch was 0 while the 2PC file was orphaned and in the
future, AdjustToFullTransactionId() would underflow the epoch used to
build the 2PC file path. In non-assert builds, this would create a
WARNING message referring to a 2PC file with an epoch of "FFFFFFFF" (or
UINT32_MAX), as an effect of the underflow calculation, leaving the
orphaned file around.
Some tests are added with dummy 2PC files in the past and the future,
checking that these are properly removed.
Issue introduced by 5a1dfde8334b, that has switched two-phase state
files to use FullTransactionIds.
Reported-by: Vitaly Davydov
Author: Michael Paquier
Reviewed-by: Vitaly Davydov
Discussion: https://postgr.es/m/13b5b6-676c3080-4d-531db900@47931709
Backpatch-through: 17
|
|
Before 728bd991c3c4, that has improved the support for 2PC files during
recovery, the initial logic scanning files in pg_twophase was done so as
files in the future of the transaction ID horizon were checked first,
followed by a check if a transaction ID is aborted or committed which
could involve a pg_xact lookup. After this commit, these checks have
been done in reverse order.
Files detected as in the future do not have a state that can be checked
in pg_xact, hence this caused recovery to fail abruptly should an
orphaned 2PC file in the future of the transaction ID horizon exist in
pg_twophase at the beginning of recovery.
A test is added to check for this scenario, using an empty 2PC with a
transaction ID large enough to be in the future when running the test.
This test is added in 16 and older versions for now. 17 and newer
versions are impacted by a second bug caused by the addition of the
epoch in the 2PC file names. An equivalent test will be added in these
branches in a follow-up commit, once the second set of issues reported
are fixed.
Author: Vitaly Davydov, Michael Paquier
Discussion: https://postgr.es/m/11e597-676ab680-8d-374f23c0@145466129
Backpatch-through: 13
|
|
Commit 34486b609 effectively redefined isBackgroundWorker as meaning
"not a regular backend", whereas before it had the narrower
meaning of AmBackgroundWorkerProcess(). For clarity, rename the
field to isRegularBackend and invert its sense.
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
|
|
Cause parallel workers to not check datallowconn, rolcanlogin, and
ACL_CONNECT privileges. The leader already checked these things
(except for rolcanlogin which might have been checked for a different
role). Re-checking can accomplish little except to induce unexpected
failures in applications that might not even be aware that their query
has been parallelized. We already had the principle that parallel
workers rely on their leader to pass a valid set of authorization
information, so this change just extends that a bit further.
Also, modify the ReservedConnections, datconnlimit and rolconnlimit
logic so that these limits are only enforced against regular backends,
and only regular backends are counted while checking if the limits
were already reached. Previously, background processes that had an
assigned database or role were subject to these limits (with rather
random exclusions for autovac workers and walsenders), and the set of
existing processes that counted against each limit was quite haphazard
as well. The point of these limits, AFAICS, is to ensure the
availability of PGPROC slots for regular backends. Since all other
types of processes have their own separate pools of PGPROC slots, it
makes no sense either to enforce these limits against them or to count
them while enforcing the limit.
While edge-case failures of these sorts have been possible for a
long time, the problem got a good deal worse with commit 5a2fed911
(CVE-2024-10978), which caused parallel workers to make some of these
checks using the leader's current role where before we had used its
AuthenticatedUserId, thus allowing parallel queries to fail after
SET ROLE. The previous behavior was fairly accidental and I have
no desire to return to it.
This patch includes reverting 73c9f91a1, which was an emergency hack
to suppress these same checks in some cases. It wasn't complete,
as shown by a recent bug report from Laurenz Albe. We can also revert
fd4d93d26 and 492217301, which hacked around the same problems in one
regression test.
In passing, remove the special case for autovac workers in
CheckMyDatabase; it seems cleaner to have AutoVacWorkerMain pass
the INIT_PG_OVERRIDE_ALLOW_CONNS flag, now that that does what's
needed.
Like 5a2fed911, back-patch to supported branches (which sadly no
longer includes v12).
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
|
|
b7493e1ab35 removed leftover mentions of XLOG_HEAP2_FREEZE_PAGE records
from comments but neglected to remove one mention of FREEZE_PAGE.
Reported off-list by Alexander Lakhin
|
|
The term "buffer context lock" is outdated as of commit 5d5087363d.
|
|
Many of them just seem to have been copied around for no real reason.
Their presence causes (small) risks of hiding actual type mismatches
or silently discarding qualifiers
Discussion: https://www.postgresql.org/message-id/flat/461ea37c-8b58-43b4-9736-52884e862820@eisentraut.org
|
|
They were all missing punctuation, one was missing initial capital.
Per our message style guidelines.
No backpatch, to avoid breaking existing translations.
|
|
When using a pipeline, a transaction starts from the first command and
is committed with a Sync message or when the pipeline ends.
Functions like IsInTransactionBlock() or PreventInTransactionBlock()
were already able to understand a pipeline as being in a transaction
block, but it was not the case of CheckTransactionBlock(). This
function is called for example to generate a WARNING for SET LOCAL,
complaining that it is used outside of a transaction block.
The current state of the code caused multiple problems, like:
- SET LOCAL executed at any stage of a pipeline issued a WARNING, even
if the command was at least second in line where the pipeline is in a
transaction state.
- LOCK TABLE failed when invoked at any step of a pipeline, even if it
should be able to work within a transaction block.
The pipeline protocol assumes that the first command of a pipeline is
not part of a transaction block, and that any follow-up commands is
considered as within a transaction block.
This commit changes the backend so as an implicit transaction block is
started each time the first Execute message of a pipeline has finished
processing, with this implicit transaction block ended once a sync is
processed. The checks based on XACT_FLAGS_PIPELINING in the routines
checking if we are in a transaction block are not necessary: it is
enough to rely on the existing ones.
Some tests are added to pgbench, that can be backpatched down to v17
when \syncpipeline is involved and down to v14 where \startpipeline and
\endpipeline are available. This is unfortunately limited regarding the
error patterns that can be checked, but it provides coverage for various
pipeline combinations to check if these succeed or fail. These tests
are able to capture the case of SET LOCAL's WARNING. The author has
proposed a different feature to improve the coverage by adding similar
meta-commands to psql where error messages could be checked, something
more useful for the cases where commands cannot be used in transaction
blocks, like REINDEX CONCURRENTLY or VACUUM. This is considered as
future work for v18~.
Author: Anthonin Bonnefoy
Reviewed-by: Jelte Fennema-Nio, Michael Paquier
Discussion: https://postgr.es/m/CAO6_XqrWO8uNBQrSu5r6jh+vTGi5Oiyk4y8yXDORdE2jbzw8xw@mail.gmail.com
Backpatch-through: 13
|
|
The SQL spec mandates that SET SESSION AUTHORIZATION implies
SET ROLE NONE. We tried to implement that within the lowest-level
functions that manipulate these settings, but that was a bad idea.
In particular, guc.c assumes that it doesn't matter in what order
it applies GUC variable updates, but that was not the case for these
two variables. This problem, compounded by some hackish attempts to
work around it, led to some security-grade issues:
* Rolling back a transaction that had done SET SESSION AUTHORIZATION
would revert to SET ROLE NONE, even if that had not been the previous
state, so that the effective user ID might now be different from what
it had been.
* The same for SET SESSION AUTHORIZATION in a function SET clause.
* If a parallel worker inspected current_setting('role'), it saw
"none" even when it should see something else.
Also, although the parallel worker startup code intended to cope
with the current role's pg_authid row having disappeared, its
implementation of that was incomplete so it would still fail.
Fix by fully separating the miscinit.c functions that assign
session_authorization from those that assign role. To implement the
spec's requirement, teach set_config_option itself to perform "SET
ROLE NONE" when it sets session_authorization. (This is undoubtedly
ugly, but the alternatives seem worse. In particular, there's no way
to do it within assign_session_authorization without incompatible
changes in the API for GUC assign hooks.) Also, improve
ParallelWorkerMain to directly set all the relevant user-ID variables
instead of relying on some of them to get set indirectly. That
allows us to survive not finding the pg_authid row during worker
startup.
In v16 and earlier, this includes back-patching 9987a7bf3 which
fixed a violation of GUC coding rules: SetSessionAuthorization
is not an appropriate place to be throwing errors from.
Security: CVE-2024-10978
|
|
Commit ac04aa84a put the shutoff for this into the planner, which is
not ideal because it doesn't prevent us from re-using a previously
made parallel plan. Revert the planner change and instead put the
shutoff into InitializeParallelDSM, modeling it on the existing code
there for recovering from failure to allocate a DSM segment.
However, that code path is mostly untested, and testing a bit harder
showed there's at least one bug: ExecHashJoinReInitializeDSM is not
prepared for us to have skipped doing parallel DSM setup. I also
thought the Assert in ReinitializeParallelWorkers is pretty
ill-advised, and replaced it with a silent Min() operation.
The existing test case added by ac04aa84a serves fine to test this
version of the fix, so no change needed there.
Patch by me, but thanks to Noah Misch for the core idea that we
could shut off worker creation when !INTERRUPTS_CAN_BE_PROCESSED.
Back-patch to v12, as ac04aa84a was.
Discussion: https://postgr.es/m/CAC-SaSzHUKT=vZJ8MPxYdC_URPfax+yoA1hKTcF4ROz_Q6z0_Q@mail.gmail.com
|
|
This commit reverts 3c5db1d6b0, and subsequent improvements and fixes
including 8036d73ae3, 867d396ccd, 3ac3ec580c, 0868d7ae70, 85b98b8d5a,
2520226c95, 014f9f34d2, e658038772, e1555645d7, 5035172e4a, 6cfebfe88b,
73da6b8d1b, and e546989a26.
The reason for reverting is a set of remaining issues. Most notably, the
stored procedure appears to need more effort than the utility statement
to turn the backend into a "snapshot-less" state. This makes an approach
to use stored procedures questionable.
Catversion is bumped.
Discussion: https://postgr.es/m/Zyhj2anOPRKtb0xW%40paquier.xyz
|
|
Instead of talking about setting latches, which is a pretty low-level
mechanism, emphasize that they wake up other processes.
This is in preparation for replacing Latches with a new abstraction.
That's still work in progress, but this seems a little tidier anyway,
so let's get this refactoring out of the way already.
Discussion: https://www.postgresql.org/message-id/391abe21-413e-4d91-a650-b663af49500c%40iki.fi
|
|
This is in preparation for replacing Latches with a new abstraction.
That's still work in progress, but this seems a little tidier anyway,
so let's get this refactoring out of the way already.
Discussion: https://www.postgresql.org/message-id/391abe21-413e-4d91-a650-b663af49500c%40iki.fi
|
|
broken by commit e18512c000e
Reported-by: Peter Geoghegan <pg@bowt.ie>
|
|
as determined by IWYU
These are mostly issues that are new since commit dbbca2cf299.
Discussion: https://www.postgresql.org/message-id/flat/0df1d5b1-8ca8-4f84-93be-121081bde049%40eisentraut.org
|
|
The inplace update survives ROLLBACK. The inval didn't, so another
backend's DDL could then update the row without incorporating the
inplace update. In the test this fixes, a mix of CREATE INDEX and ALTER
TABLE resulted in a table with an index, yet relhasindex=f. That is a
source of index corruption. Back-patch to v12 (all supported versions).
The back branch versions don't change WAL, because those branches just
added end-of-recovery SIResetAll(). All branches change the ABI of
extern function PrepareToInvalidateCacheTuple(). No PGXN extension
calls that, and there's no apparent use case in extensions.
Reviewed by Nitin Motiani and (in earlier versions) Andres Freund.
Discussion: https://postgr.es/m/20240523000548.58.nmisch@google.com
|
|
Reunite RestorePendingSyncs() with RestoreRelationMap(). If
RelationInitPhysicalAddr() ran after RestoreRelationMap() but before
RestorePendingSyncs(), the relcache entry could cause RelationNeedsWAL()
to return true erroneously. Trouble required commands of the current
transaction to include REINDEX or CLUSTER of a system catalog. The
parallel leader correctly derived RelationNeedsWAL()==false from the new
relfilenumber, but the worker saw RelationNeedsWAL()==true. Worker
MarkBufferDirtyHint() then wrote unwanted WAL. Recovery of that
unwanted WAL could lose tuples like the system could before commit
c6b92041d38512a4176ed76ad06f713d2e6c01a8 introduced this tracking.
RestorePendingSyncs() and RestoreRelationMap() were adjacent till commit
126ec0bc76d044d3a9eb86538b61242bf7da6db4, so no back-patch for now.
Reviewed by Tom Lane.
Discussion: https://postgr.es/m/20241019232815.c6.nmisch@google.com
|
|
This argument allow skipping throwing an error. Instead, the result status
can be obtained using pg_wal_replay_wait_status() function.
Catversion is bumped.
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZtUF17gF0pNpwZDI%40paquier.xyz
Reviewed-by: Pavel Borisov
|
