| Age | Commit message (Collapse) | Author |
|---|
|
Most of these had been obsoleted by 568d4138c / the SnapshotNow
removal.
This is is preparation for moving most of tqual.[ch] into either
snapmgr.h or heapam.h, which in turn is in preparation for pluggable
table AMs.
Author: Andres Freund
Discussion: https://postgr.es/m/20180703070645.wchpu5muyto5n647@alap3.anarazel.de
|
|
Author: Andres Freund
Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de
|
|
A lot of files only included heapam.h for relation_open, heap_open etc
- replace the heapam.h include in those files with the narrower
header.
Author: Andres Freund
Discussion: https://postgr.es/m/20190111000539.xbv7s6w7ilcvm7dp@alap3.anarazel.de
|
|
heapam.h previously was included in a number of widely used
headers (e.g. execnodes.h, indirectly in executor.h, ...). That's
problematic on its own, as heapam.h contains a lot of low-level
details that don't need to be exposed that widely, but becomes more
problematic with the upcoming introduction of pluggable table storage
- it seems inappropriate for heapam.h to be included that widely
afterwards.
heapam.h was largely only included in other headers to get the
HeapScanDesc typedef (which was defined in heapam.h, even though
HeapScanDescData is defined in relscan.h). The better solution here
seems to be to just use the underlying struct (forward declared where
necessary). Similar for BulkInsertState.
Another problem was that LockTupleMode was used in executor.h - parts
of the file tried to cope without heapam.h, but due to the fact that
it indirectly included it, several subsequent violations of that goal
were not not noticed. We could just reuse the approach of declaring
parameters as int, but it seems nicer to move LockTupleMode to
lockoptions.h - that's not a perfect location, but also doesn't seem
bad.
As a number of files relied on implicitly included heapam.h, a
significant number of files grew an explicit include. It's quite
probably that a few external projects will need to do the same.
Author: Andres Freund
Reviewed-By: Alvaro Herrera
Discussion: https://postgr.es/m/20190114000701.y4ttcb74jpskkcfb@alap3.anarazel.de
|
|
Backpatch-through: certain files through 9.4
|
|
Previously tables declared WITH OIDS, including a significant fraction
of the catalog tables, stored the oid column not as a normal column,
but as part of the tuple header.
This special column was not shown by default, which was somewhat odd,
as it's often (consider e.g. pg_class.oid) one of the more important
parts of a row. Neither pg_dump nor COPY included the contents of the
oid column by default.
The fact that the oid column was not an ordinary column necessitated a
significant amount of special case code to support oid columns. That
already was painful for the existing, but upcoming work aiming to make
table storage pluggable, would have required expanding and duplicating
that "specialness" significantly.
WITH OIDS has been deprecated since 2005 (commit ff02d0a05280e0).
Remove it.
Removing includes:
- CREATE TABLE and ALTER TABLE syntax for declaring the table to be
WITH OIDS has been removed (WITH (oids[ = true]) will error out)
- pg_dump does not support dumping tables declared WITH OIDS and will
issue a warning when dumping one (and ignore the oid column).
- restoring an pg_dump archive with pg_restore will warn when
restoring a table with oid contents (and ignore the oid column)
- COPY will refuse to load binary dump that includes oids.
- pg_upgrade will error out when encountering tables declared WITH
OIDS, they have to be altered to remove the oid column first.
- Functionality to access the oid of the last inserted row (like
plpgsql's RESULT_OID, spi's SPI_lastoid, ...) has been removed.
The syntax for declaring a table WITHOUT OIDS (or WITH (oids = false)
for CREATE TABLE) is still supported. While that requires a bit of
support code, it seems unnecessary to break applications / dumps that
do not use oids, and are explicit about not using them.
The biggest user of WITH OID columns was postgres' catalog. This
commit changes all 'magic' oid columns to be columns that are normally
declared and stored. To reduce unnecessary query breakage all the
newly added columns are still named 'oid', even if a table's column
naming scheme would indicate 'reloid' or such. This obviously
requires adapting a lot code, mostly replacing oid access via
HeapTupleGetOid() with access to the underlying Form_pg_*->oid column.
The bootstrap process now assigns oids for all oid columns in
genbki.pl that do not have an explicit value (starting at the largest
oid previously used), only oids assigned later by oids will be above
FirstBootstrapObjectId. As the oid column now is a normal column the
special bootstrap syntax for oids has been removed.
Oids are not automatically assigned during insertion anymore, all
backend code explicitly assigns oids with GetNewOidWithIndex(). For
the rare case that insertions into the catalog via SQL are called for
the new pg_nextoid() function can be used (which only works on catalog
tables).
The fact that oid columns on system tables are now normal columns
means that they will be included in the set of columns expanded
by * (i.e. SELECT * FROM pg_class will now include the table's oid,
previously it did not). It'd not technically be hard to hide oid
column by default, but that'd mean confusing behavior would either
have to be carried forward forever, or it'd cause breakage down the
line.
While it's not unlikely that further adjustments are needed, the
scope/invasiveness of the patch makes it worthwhile to get merge this
now. It's painful to maintain externally, too complicated to commit
after the code code freeze, and a dependency of a number of other
patches.
Catversion bump, for obvious reasons.
Author: Andres Freund, with contributions by John Naylor
Discussion: https://postgr.es/m/20180930034810.ywp2c7awz7opzcfr@alap3.anarazel.de
|
|
This allows the compiler / linker to mark affected pages as read-only.
There's other cases, but they're a bit more invasive, and should go
through some review. These are easy.
They were found with
objdump -j .data -t src/backend/postgres|awk '{print $4, $5, $6}'|sort -r|less
Discussion: https://postgr.es/m/20181015200754.7y7zfuzsoux2c4ya@alap3.anarazel.de
|
|
gcc 6.3 does not whine about this mistake I made in 39808e8868c8 but
evidently lots of other compilers do, according to Michael Paquier,
Peter Eisentraut, Arthur Zakirov, Tomas Vondra.
Discussion: too many to list
|
|
Index DDL cascading on partitioned tables introduced a way for ALTER
TABLE to be called reentrantly. This caused an an important deficiency
in event trigger support to be exposed: on exiting the reentrant call,
the alter table state object was clobbered, causing a crash when the
outer alter table tries to finalize its processing. Fix the crash by
creating a stack of event trigger state objects. There are still ways
to cause things to misbehave (and probably other crashers) with more
elaborate tricks, but at least it now doesn't crash in the obvious
scenario.
Backpatch to 9.5, where DDL deparsing of event triggers was introduced.
Reported-by: Marco Slot
Authors: Michaël Paquier, Álvaro Herrera
Discussion: https://postgr.es/m/CANNhMLCpi+HQ7M36uPfGbJZEQLyTy7XvX=5EFkpR-b1bo0uJew@mail.gmail.com
|
|
Discussion: https://postgr.es/m/15719.1523984266@sss.pgh.pa.us
|
|
EventTriggerTableRewrite crashed if there were table_rewrite triggers
present, but there had not been when the calling command started.
EventTriggerDDLCommandEnd called ddl_command_end triggers if present,
even if there had been no such triggers when the calling command started,
which would lead to a failure in pg_event_trigger_ddl_commands.
In both cases, fix by doing nothing; it's better to wait till the next
command when things will be properly initialized.
In passing, remove an elog(DEBUG1) call that might have seemed interesting
four years ago but surely isn't today.
We found this because of intermittent failures in the buildfarm. Thanks
to Alvaro Herrera and Andrew Gierth for analysis.
Back-patch to 9.5; some of this code exists before that, but the specific
hazards we need to guard against don't.
Discussion: https://postgr.es/m/5767.1523995174@sss.pgh.pa.us
|
|
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
|
There used to be a lot of different *Type and *Kind symbol groups to
address objects within different commands, most of which have been
replaced by ObjectType, starting with
b256f2426433c56b4bea3a8102757749885b81ba. But this conversion was never
done for the ACL commands until now.
This change ends up being just a plain replacement of the types and
symbols, without any code restructuring needed, except deleting some now
redundant code.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Stephen Frost <sfrost@snowman.net>
|
|
Backpatch-through: certain files through 9.3
|
|
This adds a new object type "procedure" that is similar to a function
but does not have a return type and is invoked by the new CALL statement
instead of SELECT or similar. This implementation is aligned with the
SQL standard and compatible with or similar to other SQL implementations.
This commit adds new commands CALL, CREATE/ALTER/DROP PROCEDURE, as well
as ALTER/DROP ROUTINE that can refer to either a function or a
procedure (or an aggregate function, as an extension to SQL). There is
also support for procedures in various utility commands such as COMMENT
and GRANT, as well as support in pg_dump and psql. Support for defining
procedures is available in all the languages supplied by the core
distribution.
While this commit is mainly syntax sugar around existing functionality,
future features will rely on having procedures as a separate object
type.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
|
|
Reviewed-by: Fabien COELHO <coelho@cri.ensmp.fr>
|
|
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
perltidy run not included.
|
|
Remove default cases from assorted switches over ObjectClass and some
related enum types, so that we'll get compiler warnings when someone
adds a new enum value without accounting for it in all these places.
In passing, re-order some switch cases as needed to match the declaration
of enum ObjectClass. OK, that's just neatnik-ism, but I dislike code
that looks like it was assembled with the help of a dartboard.
Discussion: https://postgr.es/m/20170512221010.nglatgt5azzdxjlj@alvherre.pgsql
|
|
copyObject() is declared to return void *, which allows easily assigning
the result independent of the input, but it loses all type checking.
If the compiler supports typeof or something similar, cast the result to
the input type. This creates a greater amount of type safety. In some
cases, where the result is assigned to a generic type such as Node * or
Expr *, new casts are now necessary, but in general casts are now
unnecessary in the normal case and indicate that something unusual is
happening.
Reviewed-by: Mark Dilger <hornschnorter@gmail.com>
|
|
Add support for explicitly declared statistic objects (CREATE
STATISTICS), allowing collection of statistics on more complex
combinations that individual table columns. Companion commands DROP
STATISTICS and ALTER STATISTICS ... OWNER TO / SET SCHEMA / RENAME are
added too. All this DDL has been designed so that more statistic types
can be added later on, such as multivariate most-common-values and
multivariate histograms between columns of a single table, leaving room
for permitting columns on multiple tables, too, as well as expressions.
This commit only adds support for collection of n-distinct coefficient
on user-specified sets of columns in a single table. This is useful to
estimate number of distinct groups in GROUP BY and DISTINCT clauses;
estimation errors there can cause over-allocation of memory in hashed
aggregates, for instance, so it's a worthwhile problem to solve. A new
special pseudo-type pg_ndistinct is used.
(num-distinct estimation was deemed sufficiently useful by itself that
this is worthwhile even if no further statistic types are added
immediately; so much so that another version of essentially the same
functionality was submitted by Kyotaro Horiguchi:
https://postgr.es/m/20150828.173334.114731693.horiguchi.kyotaro@lab.ntt.co.jp
though this commit does not use that code.)
Author: Tomas Vondra. Some code rework by Álvaro.
Reviewed-by: Dean Rasheed, David Rowley, Kyotaro Horiguchi, Jeff Janes,
Ideriha Takeshi
Discussion: https://postgr.es/m/543AFA15.4080608@fuzzy.cz
https://postgr.es/m/20170320190220.ixlaueanxegqd5gr@alvherre.pgsql
|
|
This extends the work done in commit 2f5c9d9c9 to provide a more nearly
complete abstraction layer hiding the details of index updating for catalog
changes. That commit only invented abstractions for catalog inserts and
updates, leaving nearby code for catalog deletes still calling the
heap-level routines directly. That seems rather ugly from here, and it
does little to help if we ever want to shift to a storage system in which
indexing work is needed at delete time.
Hence, create a wrapper function CatalogTupleDelete(), and replace calls
of simple_heap_delete() on catalog tuples with it. There are now very
few direct calls of [simple_]heap_delete remaining in the tree.
Discussion: https://postgr.es/m/462.1485902736@sss.pgh.pa.us
|
|
Split the existing CatalogUpdateIndexes into two different routines,
CatalogTupleInsert and CatalogTupleUpdate, which do both the heap
insert/update plus the index update. This removes over 300 lines of
boilerplate code all over src/backend/catalog/ and src/backend/commands.
The resulting code is much more pleasing to the eye.
Also, by encapsulating what happens in detail during an UPDATE, this
facilitates the upcoming WARM patch, which is going to add a few more
lines to the update case making the boilerplate even more boring.
The original CatalogUpdateIndexes is removed; there was only one use
left, and since it's just three lines, we can as well expand it in place
there. We could keep it, but WARM is going to break all the UPDATE
out-of-core callsites anyway, so there seems to be no benefit in doing
so.
Author: Pavan Deolasee
Discussion: https://www.postgr.es/m/CABOikdOcFYSZ4vA2gYfs=M2cdXzXX4qGHeEiW3fu9PCfkHLa2A@mail.gmail.com
|
|
- Add PUBLICATION catalogs and DDL
- Add SUBSCRIPTION catalog and DDL
- Define logical replication protocol and output plugin
- Add logical replication workers
From: Petr Jelinek <petr@2ndquadrant.com>
Reviewed-by: Steve Singer <steve@ssinger.info>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Erik Rijkers <er@xs4all.nl>
Reviewed-by: Peter Eisentraut <peter.eisentraut@2ndquadrant.com>
|
|
|
|
Michael Paquier
|
|
I found that half a dozen (nearly 5%) of our AllocSetContextCreate calls
had typos in the context-sizing parameters. While none of these led to
especially significant problems, they did create minor inefficiencies,
and it's now clear that expecting people to copy-and-paste those calls
accurately is not a great idea. Let's reduce the risk of future errors
by introducing single macros that encapsulate the common use-cases.
Three such macros are enough to cover all but two special-purpose contexts;
those two calls can be left as-is, I think.
While this patch doesn't in itself improve matters for third-party
extensions, it doesn't break anything for them either, and they can
gradually adopt the simplified notation over time.
In passing, change TopMemoryContext to use the default allocation
parameters. Formerly it could only be extended 8K at a time. That was
probably reasonable when this code was written; but nowadays we create
many more contexts than we did then, so that it's not unusual to have a
couple hundred K in TopMemoryContext, even without considering various
dubious code that sticks other things there. There seems no good reason
not to let it use growing blocks like most other contexts.
Back-patch to 9.6, mostly because that's still close enough to HEAD that
it's easy to do so, and keeping the branches in sync can be expected to
avoid some future back-patching pain. The bugs fixed by these changes
don't seem to be significant enough to justify fixing them further back.
Discussion: <21072.1472321324@sss.pgh.pa.us>
|
|
Our actual convention, contrary to what I said in 59a2111b23f, is not to
quote type names, as evidenced by unquoted use of format_type_be()
result value in error messages. Remove quotes from recently tweaked
messages accordingly.
Per note from Tom Lane
|
|
Change the slightly different variations of the message
function FOO must return type BAR
to a single wording, removing the variability in type name so that they
all create a single translation entry; since the type name is not to be
translated, there's no point in it being part of the message anyway.
Also, change them all to use the same quoting convention, namely that
the function name is not to be quoted but the type name is. (I'm not
quite sure why this is so, but it's the clear majority.)
Some similar messages such as "encoding conversion function FOO must ..."
are also changed.
|
|
This enables external code to create access methods. This is useful so
that extensions can add their own access methods which can be formally
tracked for dependencies, so that DROP operates correctly. Also, having
explicit support makes pg_dump work correctly.
Currently only index AMs are supported, but we expect different types to
be added in the future.
Authors: Alexander Korotkov, Petr Jelínek
Reviewed-By: Teodor Sigaev, Petr Jelínek, Jim Nasby
Commitfest-URL: https://commitfest.postgresql.org/9/353/
Discussion: https://www.postgresql.org/message-id/CAPpHfdsXwZmojm6Dx+TJnpYk27kT4o7Ri6X_4OSWcByu1Rm+VA@mail.gmail.com
|
|
Backpatch certain files through 9.1
|
|
This was forgotten in cac76582053e (and its fixup ad89a5d115). Since it
seems way too easy to miss this, this commit also introduces a mechanism
to enforce that the array is consistent with the enum.
Problem reported independently by Robert Haas and Jaimin Pan.
Patches proposed by Jaimin Pan, Jim Nasby, Michael Paquier and myself,
though I didn't use any of these and instead went with a cleaner
approach suggested by Tom Lane.
Backpatch to 9.5.
Discussion:
https://www.postgresql.org/message-id/CA+Tgmoa6SgDaxW_n_7SEhwBAc=mniYga+obUj5fmw4rU9_mLvA@mail.gmail.com
https://www.postgresql.org/message-id/29788.1437411581@sss.pgh.pa.us
|
|
A few places assumed they could pass NULL for the argtypes array when
looking up functions known to have zero arguments. At first glance
it seems that this should be safe enough, since memcmp() is surely not
allowed to fetch any bytes if its count argument is zero. However,
close reading of the C standard says that such calls have undefined
behavior, so we'd probably best avoid it.
Since the number of places doing this is quite small, and some other
places looking up zero-argument functions were already passing dummy
arrays, let's standardize on the latter solution rather than hacking
the function lookup code to avoid calling memcmp() in these cases.
I also added Asserts to catch any future violations of the new rule.
Given the utter lack of any evidence that this actually causes any
problems in the field, I don't feel a need to back-patch this change.
Per report from Piotr Stefaniak, though this is not his patch.
|
|
|
|
Patch by CharSyam, plus a few more I spotted with grep.
|
|
Use "a" and "an" correctly, mostly in comments. Two error messages were
also fixed (they were just elogs, so no translation work required). Two
function comments in pg_proc.h were also fixed. Etsuro Fujita reported one
of these, but I found a lot more with grep.
Also fix a few other typos spotted while grepping for the a/an typos.
For example, "consists out of ..." -> "consists of ...". Plus a "though"/
"through" mixup reported by Euler Taveira.
Many of these typos were in old code, which would be nice to backpatch to
make future backpatching easier. But much of the code was new, and I didn't
feel like crafting separate patches for each branch. So no backpatching.
|
|
This feature lets user code inspect and take action on DDL events.
Whenever a ddl_command_end event trigger is installed, DDL actions
executed are saved to a list which can be inspected during execution of
a function attached to ddl_command_end.
The set-returning function pg_event_trigger_ddl_commands can be used to
list actions so captured; it returns data about the type of command
executed, as well as the affected object. This is sufficient for many
uses of this feature. For the cases where it is not, we also provide a
"command" column of a new pseudo-type pg_ddl_command, which is a
pointer to a C structure that can be accessed by C code. The struct
contains all the info necessary to completely inspect and even
reconstruct the executed command.
There is no actual deparse code here; that's expected to come later.
What we have is enough infrastructure that the deparsing can be done in
an external extension. The intention is that we will add some deparsing
code in a later release, as an in-core extension.
A new test module is included. It's probably insufficient as is, but it
should be sufficient as a starting point for a more complete and
future-proof approach.
Authors: Álvaro Herrera, with some help from Andres Freund, Ian Barwick,
Abhijit Menon-Sen.
Reviews by Andres Freund, Robert Haas, Amit Kapila, Michael Paquier,
Craig Ringer, David Steele.
Additional input from Chris Browne, Dimitri Fontaine, Stephen Frost,
Petr Jelínek, Tom Lane, Jim Nasby, Steven Singer, Pavel Stěhule.
Based on original work by Dimitri Fontaine, though I didn't use his
code.
Discussion:
https://www.postgresql.org/message-id/m2txrsdzxa.fsf@2ndQuadrant.fr
https://www.postgresql.org/message-id/20131108153322.GU5809@eldon.alvh.no-ip.org
https://www.postgresql.org/message-id/20150215044814.GL3391@alvh.no-ip.org
|
|
This provides a mechanism for specifying conversions between SQL data
types and procedural languages. As examples, there are transforms
for hstore and ltree for PL/Perl and PL/Python.
reviews by Pavel Stěhule and Andres Freund
|
|
When certain event-trigger-only functions are called when not in the
wrong context, they were reporting the "feature not supported" SQLSTATE,
which is somewhat misleading. Create a new custom error code for such
uses instead.
Not backpatched since it may be seen as an undesirable behavioral
change.
Author: Michael Paquier
Discussion: https://www.postgresql.org/message-id/CAB7nPqQ-5NAkHQHh_NOm7FPep37NCiLKwPoJ2Yxb8TDoGgbYYA@mail.gmail.com
|
|
It now also reports temporary objects dropped that are local to the
backend. Previously we weren't reporting any temp objects because it
was deemed unnecessary; but as it turns out, it is necessary if we want
to keep close track of DDL command execution inside one session. Temp
objects are reported as living in schema pg_temp, which works because
such a schema-qualification always refers to the temp objects of the
current session.
|
|
In the spirit of 890192e99af and 4464303405f: have get_object_address
understand individual pg_amop and pg_amproc objects. There is no way to
refer to such objects directly in the grammar -- rather, they are almost
always considered an integral part of the opfamily that contains them.
(The only case that deals with them individually is ALTER OPERATOR
FAMILY ADD/DROP, which carries the opfamily address separately and thus
does not need it to be part of each added/dropped element's address.)
In event triggers it becomes possible to become involved with individual
amop/amproc elements, and this commit enables pg_get_object_address to
do so as well.
To make the overall coding simpler, this commit also slightly changes
the get_object_address representation for opclasses and opfamilies:
instead of having the AM name in the objargs array, I moved it as the
first element of the objnames array. This enables the new code to use
objargs for the type names used by pg_amop and pg_amproc.
Reviewed by: Stephen Frost
|
|
In the spirit of 890192e99af, this time add support for the things
living in the pg_default_acl catalog. These are not really "objects",
but they show up as such in event triggers.
There is no "DROP DEFAULT PRIVILEGES" or similar command, so it doesn't
look like the new representation given would be useful anywhere else, so
I didn't try to use it outside objectaddress.c. (That might be a bug in
itself, but that would be material for another commit.)
Reviewed by Stephen Frost.
|
|
Since commit 72dd233d3ef we were trying to obtain object addressing
information in sql_drop event triggers, but that caused failures when
the drops involved user mappings. This addition enables that to work
again. Naturally, pg_get_object_address can work with these objects
now, too.
I toyed with the idea of removing DropUserMappingStmt as a node and
using DropStmt instead in the DropUserMappingStmt grammar production,
but that didn't go very well: for one thing the messages thrown by the
specific code are specialized (you get "server not found" if you specify
the wrong server, instead of a generic "user mapping for ... not found"
which you'd get it we were to merge this with RemoveObjects --- unless
we added even more special cases). For another thing, it would require
to pass RoleSpec nodes through the objname/objargs representation used
by RemoveObjects, which works in isolation, but gets messy when
pg_get_object_address is involved. So I dropped this part for now.
Reviewed by Stephen Frost.
|
|
The changed routines are mostly those that can be directly called by
ProcessUtilitySlow; the intention is to make the affected object
information more precise, in support for future event trigger changes.
Originally it was envisioned that the OID of the affected object would
be enough, and in most cases that is correct, but upon actually
implementing the event trigger changes it turned out that ObjectAddress
is more widely useful.
Additionally, some command execution routines grew an output argument
that's an object address which provides further info about the executed
command. To wit:
* for ALTER DOMAIN / ADD CONSTRAINT, it corresponds to the address of
the new constraint
* for ALTER OBJECT / SET SCHEMA, it corresponds to the address of the
schema that originally contained the object.
* for ALTER EXTENSION {ADD, DROP} OBJECT, it corresponds to the address
of the object added to or dropped from the extension.
There's no user-visible change in this commit, and no functional change
either.
Discussion: 20150218213255.GC6717@tamriel.snowman.net
Reviewed-By: Stephen Frost, Andres Freund
|
|
When a composite type being used in a typed table is modified by way
of ALTER TYPE, a table rewrite occurs appearing to come from ALTER TYPE.
The existing event_trigger.c code was unable to cope with that
and raised a spurious error. The fix is just to accept that command
tag for the event, and document this properly.
Noted while fooling with deparsing of DDL commands. This appears to be
an oversight in commit 618c9430a.
Thanks to Mark Wong for documentation wording help.
|
|
COMMENT, SECURITY LABEL, and GRANT/REVOKE now also fire
ddl_command_start and ddl_command_end event triggers, when they operate
on database-local objects.
Reviewed-By: Michael Paquier, Andres Freund, Stephen Frost
|
|
Backpatch certain files through 9.0
|
|
These columns can be passed to pg_get_object_address() and used to
reconstruct the dropped objects identities in a remote server containing
similar objects, so that the drop can be replicated.
Reviewed by Stephen Frost, Heikki Linnakangas, Abhijit Menon-Sen, Andres
Freund.
|
|
This allows access to get_object_address from SQL, which is useful to
obtain OID addressing information from data equivalent to that emitted
by the parser. This is necessary infrastructure of a project to let
replication systems propagate object dropping events to remote servers,
where the schema might be different than the server originating the
DROP.
This patch also adds support for OBJECT_DEFAULT to get_object_address;
that is, it is now possible to refer to a column's default value.
Catalog version bumped due to the new function.
Reviewed by Stephen Frost, Heikki Linnakangas, Robert Haas, Andres
Freund, Abhijit Menon-Sen, Adam Brightwell.
|
