| Age | Commit message (Collapse) | Author |
|---|
|
as per recent discussions. Invent SubTransactionIds that are managed like
CommandIds (ie, counter is reset at start of each top transaction), and
use these instead of TransactionIds to keep track of subtransaction status
in those modules that need it. This means that a subtransaction does not
need an XID unless it actually inserts/modifies rows in the database.
Accordingly, don't assign it an XID nor take a lock on the XID until it
tries to do that. This saves a lot of overhead for subtransactions that
are only used for error recovery (eg plpgsql exceptions). Also, arrange
to release a subtransaction's XID lock as soon as the subtransaction
exits, in both the commit and abort cases. This avoids holding many
unique locks after a long series of subtransactions. The price is some
additional overhead in XactLockTableWait, but that seems acceptable.
Finally, restructure the state machine in xact.c to have a more orthogonal
set of states for subtransactions.
|
|
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
|
|
rather than when returning to the idle loop. This makes no particular
difference for interactively-issued queries, but it makes a big difference
for queries issued within functions: trigger execution now occurs before
the calling function is allowed to proceed. This responds to numerous
complaints about nonintuitive behavior of foreign key checking, such as
http://archives.postgresql.org/pgsql-bugs/2004-09/msg00020.php, and
appears to be required by the SQL99 spec.
Also take the opportunity to simplify the data structures used for the
pending-trigger list, rename them for more clarity, and squeeze out a
bit of space.
|
|
|
|
|
|
executed. Previously, the DECLARE would succeed but subsequent FETCHes
would fail since the parameter values supplied to DECLARE were not
propagated to the portal created for the cursor.
In support of this, add type Oids to ParamListInfo entries, which seems
like a good idea anyway since code that extracts a value can double-check
that it got the type of value it was expecting.
Oliver Jowett, with minor editorialization by Tom Lane.
|
|
possible to trap an error inside a function rather than letting it
propagate out to PostgresMain. You still have to use AbortCurrentTransaction
to clean up, but at least the error handling itself will cooperate.
|
|
keep track of portal-related resources separately from transaction-related
resources. This allows cursors to work in a somewhat sane fashion with
nested transactions. For now, cursor behavior is non-subtransactional,
that is a cursor's state does not roll back if you abort a subtransaction
that fetched from the cursor. We might want to change that later.
|
|
until Bind is received, so that actual parameter values are visible to the
planner. Make use of the parameter values for estimation purposes (but
don't fold them into the actual plan). This buys back most of the
potential loss of plan quality that ensues from using out-of-line
parameters instead of putting literal values right into the query text.
This patch creates a notion of constant-folding expressions 'for
estimation purposes only', in which case we can be more aggressive than
the normal eval_const_expressions() logic can be. Right now the only
difference in behavior is inserting bound values for Params, but it will
be interesting to look at other possibilities. One that we've seen
come up repeatedly is reducing now() and related functions to current
values, so that queries like ... WHERE timestampcol > now() - '1 day'
have some chance of being planned effectively.
Oliver Jowett, with some kibitzing from Tom Lane.
|
|
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
|
|
errors in internally-generated queries, such as those submitted by
plpgsql functions. Per recent discussions with Fabien Coelho.
|
|
|
|
|
|
|
|
macros in some platforms' sys/socket.h.
|
|
|
|
|
|
rather than parsing the message. Add some documentation about embedded
SQL.
|
|
|
|
|
|
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
|
|
DestReceiver pointers instead of just CommandDest values. The DestReceiver
is made at the point where the destination is selected, rather than
deep inside the executor. This cleans up the original kluge implementation
of tstoreReceiver.c, and makes it easy to support retrieving results
from utility statements inside portals. Thus, you can now do fun things
like Bind and Execute a FETCH or EXPLAIN command, and it'll all work
as expected (e.g., you can Describe the portal, or use Execute's count
parameter to suspend the output partway through). Implementation involves
stuffing the utility command's output into a Tuplestore, which would be
kind of annoying for huge output sets, but should be quite acceptable
for typical uses of utility commands.
|
|
Only lightly tested as yet, since libpq doesn't know anything about 'em.
|
|
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
|
|
context sloppiness, some other things. Includes Neil's mopup patch
of 22-Apr.
|
|
(materialization into a tuple store) discussed on pgsql-hackers earlier.
I've updated the documentation and the regression tests.
Notes on the implementation:
- I needed to change the tuple store API slightly -- it assumes that it
won't be used to hold data across transaction boundaries, so the temp
files that it uses for on-disk storage are automatically reclaimed at
end-of-transaction. I added a flag to tuplestore_begin_heap() to control
this behavior. Is changing the tuple store API in this fashion OK?
- in order to store executor results in a tuple store, I added a new
CommandDest. This works well for the most part, with one exception: the
current DestFunction API doesn't provide enough information to allow the
Executor to store results into an arbitrary tuple store (where the
particular tuple store to use is chosen by the call site of
ExecutorRun). To workaround this, I've temporarily hacked up a solution
that works, but is not ideal: since the receiveTuple DestFunction is
passed the portal name, we can use that to lookup the Portal data
structure for the cursor and then use that to get at the tuple store the
Portal is using. This unnecessarily ties the Portal code with the
tupleReceiver code, but it works...
The proper fix for this is probably to change the DestFunction API --
Tom suggested passing the full QueryDesc to the receiveTuple function.
In that case, callers of ExecutorRun could "subclass" QueryDesc to add
any additional fields that their particular CommandDest needed to get
access to. This approach would work, but I'd like to think about it for
a little bit longer before deciding which route to go. In the mean time,
the code works fine, so I don't think a fix is urgent.
- (semi-related) I added a NO SCROLL keyword to DECLARE CURSOR, and
adjusted the behavior of SCROLL in accordance with the discussion on
-hackers.
- (unrelated) Cleaned up some SGML markup in sql.sgml, copy.sgml
Neil Conway
|
|
for FETCH and MOVE.
|
|
utility statement (DeclareCursorStmt) with a SELECT query dangling from
it, rather than a SELECT query with a few unusual fields in it. Add
code to determine whether a planned query can safely be run backwards.
If DECLARE CURSOR specifies SCROLL, ensure that the plan can be run
backwards by adding a Materialize plan node if it can't. Without SCROLL,
you get an error if you try to fetch backwards from a cursor that can't
handle it. (There is still some discussion about what the exact
behavior should be, but this is necessary infrastructure in any case.)
Along the way, make EXPLAIN DECLARE CURSOR work.
|
|
right thing with the destination when FETCH 0 can't return a row,
don't try to stuff LONG_MAX into an int value.
|
|
beginning/end of cursor.
Have MOVE return 0/1 depending on cursor position.
Matches SQL spec.
Pass cursor counter from parser as a long rather than int.
Doc updates.
|
|
a per-query memory context created by CreateExecutorState --- and destroyed
by FreeExecutorState. This provides a final solution to the longstanding
problem of memory leaked by various ExecEndNode calls.
|
|
to plan nodes, not vice-versa. All executor state nodes now inherit from
struct PlanState. Copying of plan trees has been simplified by not
storing a list of SubPlans in Plan nodes (eliminating duplicate links).
The executor still needs such a list, but it can build it during
ExecutorStart since it has to scan the plan tree anyway.
No initdb forced since no stored-on-disk structures changed, but you
will need a full recompile because of node-numbering changes.
|
|
of cursor.
|
|
|
|
in snapshots, per my proposal of a few days ago. Also, tweak heapam.c
routines (heap_insert, heap_update, heap_delete, heap_mark4update) to
be passed the command ID to use, instead of doing GetCurrentCommandID.
For catalog updates they'll still get passed current command ID, but
for updates generated from the main executor they'll get passed the
command ID saved in the snapshot the query is using. This should fix
some corner cases associated with functions and triggers that advance
current command ID while an outer query is still in progress.
|
|
have been divided according to the type of object manipulated - so ALTER
TABLE code is in tablecmds.c, aggregate commands in aggregatecmds.c and
so on.
A few common support routines remain in define.c (prototypes in
src/include/commands/defrem.h).
No code has been changed except for includes to reflect the new files.
The prototypes for aggregatecmds.c, functioncmds.c, operatorcmds.c,
and typecmds.c remain in src/include/commands/defrem.h.
From John Gray <jgray@azuli.co.uk>
|
