| Age | Commit message (Collapse) | Author |
|---|
|
triggers exist but are all disabled. Problem noted by Gavin Sherry in
original discussion of enable/disable trigger patch, but was never
addressed.
|
|
use these instead of its previous hack of changing pg_class.reltriggers.
Documentation is lacking, will add that later.
Patch by Satoshi Nagayasu, review and some extra work by Tom Lane.
|
|
insufficient paranoia in code that follows t_ctid links. (We must do both
because even with VACUUM doing it properly, the intermediate state with
a dangling t_ctid link is visible concurrently during lazy VACUUM, and
could be seen afterwards if either type of VACUUM crashes partway through.)
Also try to improve documentation about what's going on. Patch is a bit
bulky because passing the XMAX information around required changing the
APIs of some low-level heapam.c routines, but it's not conceptually very
complicated. Per trouble report from Teodor and subsequent analysis.
This needs to be back-patched, but I'll do that after 8.1 beta is out.
|
|
whenever we generate a new OID. This prevents occasional duplicate-OID
errors that can otherwise occur once the OID counter has wrapped around.
Duplicate relfilenode values are also checked for when creating new
physical files. Per my recent proposal.
|
|
Original patch by Hans-Juergen Schoenig, revisions by Karel Zak
and Tom Lane.
|
|
key, compare the new and old row versions. If the foreign key column has
not changed, we needn't enqueue the trigger, since the update cannot
violate the foreign key. This optimization was previously applied in the
RI trigger function, but it is more efficient to avoid firing the trigger
altogether. Per recent discussion on pgsql-hackers.
Also add a regression test for some unintuitive foreign key behavior, and
refactor some code that deals with the OIDs of the various RI trigger
functions.
|
|
which is neither needed by nor related to that header. Remove the bogus
inclusion and instead include the header in those C files that actually
need it. Also fix unnecessary inclusions and bad inclusion order in
tsearch2 files.
|
|
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
|
|
indexes. Replace all heap_openr and index_openr calls by heap_open
and index_open. Remove runtime lookups of catalog OID numbers in
various places. Remove relcache's support for looking up system
catalogs by name. Bulky but mostly very boring patch ...
|
|
indexes. Extend the macros in include/catalog/*.h to carry the info
about hand-assigned OIDs, and adjust the genbki script and bootstrap
code to make the relations actually get those OIDs. Remove the small
number of RelOid_pg_foo macros that we had in favor of a complete
set named like the catname.h and indexing.h macros. Next phase will
get rid of internal use of names for looking up catalogs and indexes;
but this completes the changes forcing an initdb, so it looks like a
good place to commit.
Along the way, I made the shared relations (pg_database etc) not be
'bootstrap' relations any more, so as to reduce the number of hardwired
entries and simplify changing those relations in future. I'm not
sure whether they ever really needed to be handled as bootstrap
relations, but it seems to work fine to not do so now.
|
|
deferred triggers: either one can create more work for the other,
so we have to loop till it's all gone. Per example from andrew@supernews.
Add a regression test to help spot trouble in this area in future.
|
|
former to 100 by default. Clean up some of the less necessary
dependencies on FUNC_MAX_ARGS; however, the biggie (FunctionCallInfoData)
remains.
|
|
change saves a great deal of space in pg_proc and its primary index,
and it eliminates the former requirement that INDEX_MAX_KEYS and
FUNC_MAX_ARGS have the same value. INDEX_MAX_KEYS is still embedded
in the on-disk representation (because it affects index tuple header
size), but FUNC_MAX_ARGS is not. I believe it would now be possible
to increase FUNC_MAX_ARGS at little cost, but haven't experimented yet.
There are still a lot of vestigial references to FUNC_MAX_ARGS, which
I will clean up in a separate pass. However, getting rid of it
altogether would require changing the FunctionCallInfoData struct,
and I'm not sure I want to buy into that.
|
|
executing a statement that fires triggers. Formerly this time was
included in "Total runtime" but not otherwise accounted for.
As a side benefit, we avoid re-opening relations when firing non-deferred
AFTER triggers, because the trigger code can re-use the main executor's
ResultRelInfo data structure.
|
|
per request from Tom.
|
|
ExclusiveLock rather than AccessExclusiveLock. This will allow concurrent
SELECT queries to proceed on the table. Per discussion with Andrew at
SuperNews.
|
|
rather than an integer, and fix the associated fallout. From Alvaro
Herrera.
|
|
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
|
|
triggers during COMMIT. Per trouble report from Frank van Vugt.
|
|
buffer is valid, as ReadBuffer() will elog on error. Most of the call
sites of ReadBuffer() got this right, but this patch fixes those call
sites that did not.
|
|
of HeapTupleSatisfiesItself() to trigger a hint-bit update on the tuple:
if the row was updated or deleted by a subtransaction of my own transaction
that was later rolled back. This cannot occur in pre-8.0 of course, so
the hint-bit patch applied a couple weeks ago is OK for existing releases.
But for 8.0 it seems we had better fix things so that RI_FKey_check can
pass the correct buffer number to HeapTupleSatisfiesItself. Accordingly,
add fields to the TriggerData struct to carry the buffer ID(s) for the
old and new tuple(s). There are other possible solutions but this one
seems cleanest; it will allow other AFTER-trigger functions to safely
do tqual.c calls if they want to. Put new fields at end of struct so
that there is no API breakage.
|
|
NO ACTION check is deferrable. This seems to be a closer approximation
to what the SQL spec says than what we were doing before, and it prevents
some anomalous behaviors that are possible now that triggers can fire
during the execution of PL functions.
Stephan Szabo.
|
|
rather than when returning to the idle loop. This makes no particular
difference for interactively-issued queries, but it makes a big difference
for queries issued within functions: trigger execution now occurs before
the calling function is allowed to proceed. This responds to numerous
complaints about nonintuitive behavior of foreign key checking, such as
http://archives.postgresql.org/pgsql-bugs/2004-09/msg00020.php, and
appears to be required by the SQL99 spec.
Also take the opportunity to simplify the data structures used for the
pending-trigger list, rename them for more clarity, and squeeze out a
bit of space.
|
|
status. In particular, I see no reason for deferredTriggerCheckState
to make an explicit entry to note that a particular trigger has its
default state --- that just clutters a list that should normally be
empty or very short. I have plans to revise this module much more
heavily, but this is a simple separable improvement.
|
|
discussion.
|
|
Asserts would lead to a server core dump if an error occurred while
trying to abort a failed subtransaction (thereby leading to re-execution
of whatever parts of AbortSubTransaction had already run). This of course
does not prevent such an error from creating an infinite loop, but at
least we don't make the situation worse. Responds to an open item on
the subtransactions to-do list.
|
|
|
|
|
|
performance front, but with feature freeze upon us I think it's time to
drive a stake in the ground and say that this will be in 7.5.
Alvaro Herrera, with some help from Tom Lane.
|
|
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
|
|
the relcache, and so the notion of 'blind write' is gone. This should
improve efficiency in bgwriter and background checkpoint processes.
Internal restructuring in md.c to remove the not-very-useful array of
MdfdVec objects --- might as well just use pointers.
Also remove the long-dead 'persistent main memory' storage manager (mm.c),
since it seems quite unlikely to ever get resurrected.
|
|
|
|
pghackers proposal of 8-Nov. All the existing cross-type comparison
operators (int2/int4/int8 and float4/float8) have appropriate support.
The original proposal of storing the right-hand-side datatype as part of
the primary key for pg_amop and pg_amproc got modified a bit in the event;
it is easier to store zero as the 'default' case and only store a nonzero
when the operator is actually cross-type. Along the way, remove the
long-since-defunct bigbox_ops operator class.
|
|
Remove the 'strategy map' code, which was a large amount of mechanism
that no longer had any use except reverse-mapping from procedure OID to
strategy number. Passing the strategy number to the index AM in the
first place is simpler and faster.
This is a preliminary step in planned support for cross-datatype index
operations. I'm committing it now since the ScanKeyEntryInitialize()
API change touches quite a lot of files, and I want to commit those
changes before the tree drifts under me.
|
|
like the next higher one.
|
|
developed on -hackers.
|
|
to allow es_snapshot to be set to SnapshotNow rather than a query snapshot.
This solves a bug reported by Wade Klaver, wherein triggers fired as a
result of RI cascade updates could misbehave.
|
|
terms, add some clarifications, fix some untranslatable attempts at dynamic
message building.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
function-not-found messages now distinguish the cases no-match and
ambiguous-match, and they follow the style guidelines too.
|
|
restructures the deferred trigger queue. The fundamental change is to
put all the static variables to hold the deferred triggers in a single
structure.
Alvaro Herrera
|
|
deferredTriggerInvokeEvents only scan events added since it last ran.
Stephan Szabo, some corrections by Tom Lane.
|
|
an unneeded memory context and some variables that are not used anymore.
It's pretty trivial and the regression tests pass fine. There's no
change in functionality, only deletion of unused code. I left an empty
function because maybe I'll need it for nested transactions.
Alvaro Herrera
|
|
qual checking, not GetCurrentCommandId. Per test case from Steve Wolfe.
|
|
rid of the assumption that sizeof(Oid)==sizeof(int). This is one small
step towards someday supporting 8-byte OIDs. For the moment, it doesn't
do much except get rid of a lot of unsightly casts.
|
