| Age | Commit message (Collapse) | Author |
|---|
|
if we already have a stronger lock due to the index's table being the
update target table of the query. Same optimization I applied earlier
at the table level. There doesn't seem to be much interest in the more
radical idea of not locking indexes at all, so do what we can ...
|
|
relation if it's already been locked by execMain.c as either a result
relation or a FOR UPDATE/SHARE relation. This avoids an extra trip to
the shared lock manager state. Per my suggestion yesterday.
|
|
child plan nodes until we have acquired lock on the relation to scan.
The relative order of initialization of plan nodes isn't real important in
other cases, but it's critical here because one is supposed to lock a
relation before its indexes, not vice versa. The original coding was at
least vulnerable to deadlock against DROP INDEX, and perhaps worse things.
|
|
it's worth probing the outer relation for emptiness before building the
hash table. To wit, if we're rescanning a join previously performed,
remember whether we found it nonempty the previous time, and don't bother
with the probe if it was nonempty. This buys back the performance lost
in examples like Mario Weilguni's.
|
|
one child or the other had a problem: they did not leave the node in a
state that ExecReScanHashJoin would understand. In particular it would
tend to fail to reset the child plans when needed. Per report from
Mario Weilguni.
|
|
"ctid IN (list)" will still work after we convert IN to ScalarArrayOpExpr.
Make some minor efficiency improvements while at it, such as ensuring that
multiple TIDs are fetched in physical heap order. And fix EXPLAIN so that
it shows what's really going on for a TID scan.
|
|
when we first read the page, rather than checking them one at a time.
This allows us to take and release the buffer content lock just once
per page, instead of once per tuple. Since it's a shared lock the
contention penalty for holding the lock longer shouldn't be too bad.
We can safely do this only when using an MVCC snapshot; else the
assumption that visibility won't change over time is uncool. Therefore
there are now two code paths depending on the snapshot type. I also
made the same change in nodeBitmapHeapscan.c, where it can be done always
because we only support MVCC snapshots for bitmap scans anyway.
Also make some incidental cleanups in the APIs of these functions.
Per a suggestion from Qingqing Zhou.
|
|
qualification when the underlying operator is indexable and useOr is true.
That is, indexkey op ANY (ARRAY[...]) is effectively translated into an
OR combination of one indexscan for each array element. This only works
for bitmap index scans, of course, since regular indexscans no longer
support OR'ing of scans. There are still some loose ends to clean up
before changing 'x IN (list)' to translate as a ScalarArrayOpExpr;
for instance predtest.c ought to be taught about it. But this gets the
basic functionality in place.
|
|
a TupleTableSlot: instead of calling ExecClearTuple, inline the needed
operations, so that we can avoid redundant steps. In particular, when
the old and new tuples are both on the same disk page, avoid releasing
and re-acquiring the buffer pin --- this saves work in both the bufmgr
and ResourceOwner modules. To make this improvement actually useful,
partially revert a change I made on 2004-04-21 that caused SeqNext
et al to call ExecClearTuple before ExecStoreTuple. The motivation
for that, to avoid grabbing the BufMgrLock separately for releasing
the old buffer and grabbing the new one, no longer applies. My
profiling says that this saves about 5% of the CPU time for an
all-in-memory seqscan.
|
|
generate their output tuple descriptors from their target lists (ie, using
ExecAssignResultTypeFromTL()). We long ago fixed things so that all node
types have minimally valid tlists, so there's no longer any good reason to
have two different ways of doing it. This change is needed to fix bug
reported by Hayden James: the fix of 2005-11-03 to emit the correct column
names after optimizing away a SubqueryScan node didn't work if the new
top-level plan node used ExecAssignResultTypeFromOuterPlan to generate its
tupdesc, since the next plan node down won't have the correct column labels.
|
|
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
|
|
the convenience of tuptoaster.c and is no longer needed, so may as well
get rid of some small amount of overhead.
|
|
tuple in-place, but instead passes back an all-new tuple structure if
any changes are needed. This is a much cleaner and more robust solution
for the bug discovered by Alexey Beschiokov; accordingly, revert the
quick hack I installed yesterday.
With this change, HeapTupleData.t_datamcxt is no longer needed; will
remove it in a separate commit in HEAD only.
|
|
doing heap_insert or heap_update, wipe out any extracted fields in
the TupleTableSlot containing the tuple, because they might not be valid
anymore if tuptoaster.c changed the tuple. Safe because slot must be
in the materialized state, but mighty ugly --- find a better answer!
|
|
|
|
functionality, but I still need to make another pass looking at places
that incidentally use arrays (such as ACL manipulation) to make sure they
are null-safe. Contrib needs work too.
I have not changed the behaviors that are still under discussion about
array comparison and what to do with lower bounds.
|
|
slot of the topmost plan node when a trigger returns a modified tuple.
These appear to be the only places where a plan node's caller did not
treat the result slot as read-only, which is an assumption that nodeUnique
makes as of 8.1. Fixes trigger-vs-DISTINCT bug reported by Frank van Vugt.
|
|
those names. (Debug and None were pretty bad names anyway.) I hope I catched
all uses of the names in comments too.
|
|
generated from subquery outputs: use the type info stored in the Var
itself. To avoid making ExecEvalVar and slot_getattr more complex
and slower, I split out the whole-row case into a separate ExecEval routine.
|
|
type ID information even when it's a record type. This is needed to
handle whole-row Vars referencing subquery outputs. Per example from
Richard Huxton.
|
|
by a recent HP C compiler. Mostly, get rid of useless local variables
that are assigned to but never used.
|
|
|
|
generated by bitmap index scans. Along the way, simplify and speed up
the code for counting sequential and index scans; it was both confusing
and inefficient to be taking care of that in the per-tuple loops, IMHO.
initdb forced because of internal changes in pg_stat view definitions.
|
|
the ProcessUtility case, resulting in an intratransaction memory leak
if a utility command actually did return any tuples, as reported by
Dmitry Karasik. Fix this and also make the behavior more consistent
for cases involving nested SPI operations and multiple query trees,
by ensuring that we store the state locally until it is ready to be
returned to the caller.
|
|
outer relation is empty did not work, per test case from Patrick Welche.
It tried to use nodeHashjoin.c's high-level mechanisms for fetching an
outer-relation tuple, but that code expected the hash table to be filled
already. As patched, the code failed in corner cases such as having no
outer-relation tuples for the first hash batch. Revert and rewrite.
|
|
|
|
got an empty bitmap after any step; the remaining subplans can no longer
affect the result. Per a suggestion from Ilia Kantor.
|
|
the parent table, even if the command that creates them is executed by
someone else (such as a superuser or a member of the owning role).
Per gripe from Michael Fuhr.
|
|
insufficient paranoia in code that follows t_ctid links. (We must do both
because even with VACUUM doing it properly, the intermediate state with
a dangling t_ctid link is visible concurrently during lazy VACUUM, and
could be seen afterwards if either type of VACUUM crashes partway through.)
Also try to improve documentation about what's going on. Patch is a bit
bulky because passing the XMAX information around required changing the
APIs of some low-level heapam.c routines, but it's not conceptually very
complicated. Per trouble report from Teodor and subsequent analysis.
This needs to be back-patched, but I'll do that after 8.1 beta is out.
|
|
|
|
Original patch by Hans-Juergen Schoenig, revisions by Karel Zak
and Tom Lane.
|
|
and pg_auth_members. There are still many loose ends to finish in this
patch (no documentation, no regression tests, no pg_dump support for
instance). But I'm going to commit it now anyway so that Alvaro can
make some progress on shared dependencies. The catalog changes should
be pretty much done.
|
|
|
|
(a/k/a SELECT INTO). Instead, flush and fsync the whole relation before
committing. We do still need the WAL log when PITR is active, however.
Simon Riggs and Tom Lane.
|
|
work if either of the join relations are empty. The logic is:
(1) if the inner relation's startup cost is less than the outer
relation's startup cost and this is not an outer join, read
a single tuple from the inner relation via ExecHash()
- if NULL, we're done
(2) read a single tuple from the outer relation
- if NULL, we're done
(3) build the hash table on the inner relation
- if hash table is empty and this is not an outer join,
we're done
(4) otherwise, do hash join as usual
The implementation uses the new MultiExecProcNode API, per a
suggestion from Tom: invoking ExecHash() now produces the first
tuple from the Hash node's child node, whereas MultiExecHash()
builds the hash table.
I had to put in a bit of a kludge to get the row count returned
for EXPLAIN ANALYZE to be correct: since ExecHash() is invoked to
return a tuple, and then MultiExecHash() is invoked, we would
return one too many tuples to EXPLAIN ANALYZE. I hacked around
this by just manually detecting this situation and subtracting 1
from the EXPLAIN ANALYZE row count.
|
|
this in turn causes CREATE TABLE AS in plpgsql to set ROW_COUNT.
This is how it behaved before 7.4; I had unintentionally changed the
behavior in a bit of sloppy micro-optimization.
|
|
spotted by Qingqing Zhou. The HASH_ENTER action now automatically
fails with elog(ERROR) on out-of-memory --- which incidentally lets
us eliminate duplicate error checks in quite a bunch of places. If
you really need the old return-NULL-on-out-of-memory behavior, you
can ask for HASH_ENTER_NULL. But there is now an Assert in that path
checking that you aren't hoping to get that behavior in a palloc-based
hash table.
Along the way, remove the old HASH_FIND_SAVE/HASH_REMOVE_SAVED actions,
which were not being used anywhere anymore, and were surely too ugly
and unsafe to want to see revived again.
|
|
aren't doing anything useful (ie, neither selection nor projection).
Also, extend to SubqueryScan the hacks already in place to avoid
unnecessary ExecProject calls when the result would just be the same
tuple the subquery already delivered. This saves some overhead in
UNION and other set operations, as well as avoiding overhead for
unflatten-able subqueries. Per example from Sokolov Yura.
|
|
in an inconsistent state. (This is only latent because in reality
ExecSeqRestrPos is dead code at the moment ... but someday maybe it won't
be.) Add some comments about what the API for plan node mark/restore
actually is, because it's not immediately obvious.
|
|
tad faster.
|
|
When one side of the join has a NULL, we don't want to uselessly try
to match it against every remaining tuple of the other side. While
at it, rewrite the comparison machinery to avoid multiple evaluations
of the left and right input expressions and to use a btree comparator
where available, instead of double operator calls. Also revise the
state machine to eliminate redundant comparisons and hopefully make it
more readable too.
|
|
want to handle set inputs, it should just pass NULL for isDone, not make
its own failure check.
|
|
actually follow the protocol; per example from Kris Jurka.
|
|
which is neither needed by nor related to that header. Remove the bogus
inclusion and instead include the header in those C files that actually
need it. Also fix unnecessary inclusions and bad inclusion order in
tsearch2 files.
|
|
startup to end, rather than re-opening it in each MultiExecBitmapIndexScan
call. I had foolishly thought that opening/closing wouldn't be much
more expensive than a rescan call, but that was sheer brain fade.
This seems to fix about half of the performance lossage reported by
Sergey Koposov. I'm still not sure where the other half went.
|
|
to produce when running the executor. This is consistent with the internal
executor APIs (such as ExecutorRun), which also use a long for this purpose.
It also allows FETCH_ALL to be passed -- since FETCH_ALL is defined as
LONG_MAX, this wouldn't have worked on platforms where int and long are of
different sizes. Per report from Tzahi Fadida.
|
|
only one argument. (Per recent discussion, the option to accept multiple
arguments is pretty useless for user-defined types, and would be a likely
source of security holes if it was used.) Simplify call sites of
output/send functions to not bother passing more than one argument.
|
|
to eliminate unnecessary deadlocks. This commit adds SELECT ... FOR SHARE
paralleling SELECT ... FOR UPDATE. The implementation uses a new SLRU
data structure (managed much like pg_subtrans) to represent multiple-
transaction-ID sets. When more than one transaction is holding a shared
lock on a particular row, we create a MultiXactId representing that set
of transactions and store its ID in the row's XMAX. This scheme allows
an effectively unlimited number of row locks, just as we did before,
while not costing any extra overhead except when a shared lock actually
has to be shared. Still TODO: use the regular lock manager to control
the grant order when multiple backends are waiting for a row lock.
Alvaro Herrera and Tom Lane.
|
|
node, as this behavior is now better done as a bitmap OR indexscan.
This allows considerable simplification in nodeIndexscan.c itself as
well as several planner modules concerned with indexscan plan generation.
Also we can improve the sharing of code between regular and bitmap
indexscans, since they are now working with nigh-identical Plan nodes.
|
|
but just to open and close it during MultiExecBitmapIndexScan. This
avoids acquiring duplicate resources (eg, multiple locks on the same
relation) in a tree with many bitmap scans. Also, don't bother to
lock the parent heap at all here, since we must be underneath a
BitmapHeapScan node that will be holding a suitable lock.
|
