| Age | Commit message (Collapse) | Author |
|---|
|
visibility_fraction should not be applied to regular indexscans.
Noted by Cédric Villemain.
|
|
When a btree index contains all columns required by the query, and the
visibility map shows that all tuples on a target heap page are
visible-to-all, we don't need to fetch that heap page. This patch depends
on the previous patches that made the visibility map reliable.
There's a fair amount left to do here, notably trying to figure out a less
chintzy way of estimating the cost of an index-only scan, but the core
functionality seems ready to commit.
Robert Haas and Ibrar Ahmed, with some previous work by Heikki Linnakangas.
|
|
If an indexable operator for a non-collatable indexed datatype has a
collatable right-hand input type, any OpExpr for it will be marked with a
nonzero inputcollid (since having one collatable input is sufficient to
make that happen). However, an index on a non-collatable column certainly
doesn't have any collation. This caused us to fail to match such operators
to their indexes, because indxpath.c required an exact match of index
collation and clause collation. It seems correct to allow a match when the
index is collation-less regardless of the clause's inputcollid: an operator
with both noncollatable and collatable inputs could perhaps depend on the
collation of the collatable input, but it could hardly expect the index for
the noncollatable input to have that same collation.
Per bug #6232 from Pierre Ducroquet. His example is specifically about
"hstore ? text" but the problem seems quite generic.
|
|
In commit c1d9579dd8bf3c921ca6bc2b62c40da6d25372e5, I changed things so
that the output of the Agg node that feeds the window functions would not
list any ungrouped Vars directly. Formerly, for example, the Agg tlist
might have included both "x" and "sum(x)", which is not really valid if
"x" isn't a grouping column. If we then had a window function ordering on
something like "sum(x) + 1", prepare_sort_from_pathkeys would find no exact
match for this in the Agg tlist, and would conclude that it must recompute
the expression. But it would break the expression down to just the Var
"x", which it would find in the tlist, and then rebuild the ORDER BY
expression using a reference to the subplan's "x" output. Now, after the
above-referenced changes, "x" isn't in the Agg tlist if it's not a grouping
column, so that prepare_sort_from_pathkeys fails with "could not find
pathkey item to sort", as reported by Bricklen Anderson.
The fix is to not break down Aggrefs into their component parts, but just
treat them as irreducible expressions to be sought in the subplan tlist.
This is definitely OK for the use with respect to window functions in
grouping_planner, since it just built the tlist being used on the same
basis. AFAICT it is safe for other uses too; most of the other call sites
couldn't encounter Aggrefs anyway.
|
|
The constraint exclusion feature checks for contradictions among scan
restriction clauses, as well as contradictions between those clauses and a
table's CHECK constraints. The first aspect of this testing can be useful
for non-table relations (such as subqueries or functions-in-FROM), but the
feature was coded with only the CHECK case in mind so we were applying it
only to plain-table RTEs. Move the relation_excluded_by_constraints call
so that it is applied to all RTEs not just plain tables. With the default
setting of constraint_exclusion this results in no extra work, but with
constraint_exclusion = ON we will detect optimizations that we missed
before (at the cost of more planner cycles than we expended before).
Per a gripe from Gunnlaugur Þór Briem. Experimentation with
his example also showed we were not being very bright about the case where
constraint exclusion is proven within a subquery within UNION ALL, so tweak
the code to allow set_append_rel_pathlist to recognize such cases.
|
|
walsender.h should depend on xlog.h, not vice versa. (Actually, the
inclusion was circular until a couple hours ago, which was even sillier;
but Bruce broke it in the expedient rather than logically correct
direction.) Because of that poor decision, plus blind application of
pgrminclude, we had a situation where half the system was depending on
xlog.h to include such unrelated stuff as array.h and guc.h. Clean up
the header inclusion, and manually revert a lot of what pgrminclude had
done so things build again.
This episode reinforces my feeling that pgrminclude should not be run
without adult supervision. Inclusion changes in header files in particular
need to be reviewed with great care. More generally, it'd be good if we
had a clearer notion of module layering to dictate which headers can sanely
include which others ... but that's a big task for another day.
|
|
Formerly, set_subquery_pathlist and other creators of plans for subqueries
saved only the rangetable and rowMarks lists from the lower-level
PlannerInfo. But there's no reason not to remember the whole PlannerInfo,
and indeed this turns out to simplify matters in a number of places.
The immediate reason for doing this was so that the subroot will still be
accessible when we're trying to extract column statistics out of an
already-planned subquery. But now that I've done it, it seems like a good
code-beautification effort in its own right.
I also chose to get rid of the transient subrtable and subrowmark fields in
SubqueryScan nodes, in favor of having setrefs.c look up the subquery's
RelOptInfo. That required changing all the APIs in setrefs.c to pass
PlannerInfo not PlannerGlobal, which was a large but quite mechanical
transformation.
One side-effect not foreseen at the beginning is that this finally broke
inheritance_planner's assumption that replanning the same subquery RTE N
times would necessarily give interchangeable results each time. That
assumption was always pretty risky, but now we really have to make a
separate RTE for each instance so that there's a place to carry the
separate subroots.
|
|
|
|
set_append_rel_pathlist supposed that, while computing per-column width
estimates for the appendrel, it could ignore child rels for which the
translated reltargetlist entry wasn't a Var. This gave rise to completely
silly estimates in some common cases, such as constant outputs from some or
all of the arms of a UNION ALL. Instead, fall back on get_typavgwidth to
estimate from the value's datatype; which might be a poor estimate but at
least it's not completely wacko.
That problem was exposed by an Assert in set_subquery_size_estimates, which
unfortunately was still overoptimistic even with that fix, since we don't
compute attr_widths estimates for appendrels that are entirely excluded by
constraints. So remove the Assert; we'll just fall back on get_typavgwidth
in such cases.
Also, since set_subquery_size_estimates calls set_baserel_size_estimates
which calls set_rel_width, there's no need for set_subquery_size_estimates
to call get_typavgwidth; set_rel_width will handle it for us if we just
leave the estimate set to zero. Remove the unnecessary code.
Per report from Erik Rijkers and subsequent investigation.
|
|
This requires adjusting the API for syscache callback functions: they now
get a hash value, not a TID, to identify the target tuple. Most of them
weren't paying any attention to that argument anyway, but plancache did
require a small amount of fixing.
Also, improve performance a trifle by avoiding sending duplicate inval
messages when a heap_update isn't changing the catcache lookup columns.
|
|
Such a construction is useless since the lower PlaceHolderVar is already
nullable; no need to make it more so. Noted while pursuing bug #6154.
This is just a minor planner efficiency improvement, since the final plan
will come out the same anyway after PHVs are flattened. So not worth the
risk of back-patching.
|
|
A PlaceHolderVar's expression might contain another, lower-level
PlaceHolderVar. If the outer PlaceHolderVar is used, the inner one
certainly will be also, and so we have to make sure that both of them get
into the placeholder_list with correct ph_may_need values during the
initial pre-scan of the query (before deconstruct_jointree starts).
We did this correctly for PlaceHolderVars appearing in the query quals,
but overlooked the issue for those appearing in the top-level targetlist;
with the result that nested placeholders referenced only in the targetlist
did not work correctly, as illustrated in bug #6154.
While at it, add some error checking to find_placeholder_info to ensure
that we don't try to create new placeholders after it's too late to do so;
they have to all be created before deconstruct_jointree starts.
Back-patch to 8.4 where the PlaceHolderVar mechanism was introduced.
|
|
glibc renders random() thread-safe by wrapping a futex lock around it;
testing reveals that this limits the performance of pgbench on machines
with many CPU cores. Rather than switching to random_r(), which is
only available on GNU systems and crashes unless you use undocumented
alchemy to initialize the random state properly, switch to our built-in
implementation of erand48(), which is both thread-safe and concurrent.
Since the list of reasons not to use the operating system's erand48()
is getting rather long, rename ours to pg_erand48() (and similarly
for our implementations of lrand48() and srand48()) and just always
use those. We were already doing this on Cygwin anyway, and the
glibc implementation is not quite thread-safe, so pgbench wouldn't
be able to use that either.
Per discussion with Tom Lane.
|
|
If a Var was used only in a GROUP BY expression, the previous
implementation would include the Var by itself (as well as the expression)
in the generated targetlist. This wouldn't affect the efficiency of the
scan/join part of the plan at all, but it could result in passing
unnecessarily-wide rows through sorting and grouping steps. It turns out
to take only a little more code, and not noticeably more time, to generate
a tlist without such redundancy, so let's do that. Per a recent gripe from
HarmeekSingh Bedi.
|
|
There's a heuristic in estimate_rel_size() to clamp the minimum size
estimate for a table to 10 pages, unless we can see that vacuum or analyze
has been run (and set relpages to something nonzero, so this will always
happen for a table that's actually empty). However, it would be better
not to do this for inheritance parent tables, which very commonly are
really empty and can be expected to stay that way. Per discussion of a
recent pgsql-performance report from Anish Kejariwal. Also prevent it
from happening for indexes (although this is more in the nature of
documentation, since CREATE INDEX normally initializes relpages to
something nonzero anyway).
Back-patch to 9.0, because the ability to collect statistics across a
whole inheritance tree has improved the planner's estimates to the point
where this relatively small error makes a significant difference. In the
referenced report, merge or hash joins were incorrectly estimated as
cheaper than a nestloop with inner indexscan on the inherited table.
That was less likely before 9.0 because the lack of inherited stats would
have resulted in a default (and rather pessimistic) estimate of the cost
of a merge or hash join.
|
|
No code changes; just avoid blaming query_planner for things it doesn't
really do.
|
|
Regular aggregate functions in combination with, or within the arguments
of, window functions are OK per spec; they have the semantics that the
aggregate output rows are computed and then we run the window functions
over that row set. (Thus, this combination is not really useful unless
there's a GROUP BY so that more than one aggregate output row is possible.)
The case without GROUP BY could fail, as recently reported by Jeff Davis,
because sloppy construction of the Agg node's targetlist resulted in extra
references to possibly-ungrouped Vars appearing outside the aggregate
function calls themselves. See the added regression test case for an
example.
Fixing this requires modifying the API of flatten_tlist and its underlying
function pull_var_clause. I chose to make pull_var_clause's API for
aggregates identical to what it was already doing for placeholders, since
the useful behaviors turn out to be the same (error, report node as-is, or
recurse into it). I also tightened the error checking in this area a bit:
if it was ever valid to see an uplevel Var, Aggref, or PlaceHolderVar here,
that was a long time ago, so complain instead of ignoring them.
Backpatch into 9.1. The failure exists in 8.4 and 9.0 as well, but seeing
that it only occurs in a basically-useless corner case, it doesn't seem
worth the risks of changing a function API in a minor release. There might
be third-party code using pull_var_clause.
|
|
get_op_btree_interpretation assumed this in order to save some duplication
of code, but it's not true in general anymore because we added <> support
to btree_gist. (We still assume it for btree opclasses, though.)
Also, essentially the same logic was baked into predtest.c. Get rid of
that duplication by generalizing get_op_btree_interpretation so that it
can be used by predtest.c.
Per bug report from Denis de Bernardy and investigation by Jeff Davis,
though I didn't use Jeff's patch exactly as-is.
Back-patch to 9.1; we do not support this usage before that.
|
|
This lets us stop including rel.h into execnodes.h, which is a widely
used header.
|
|
This means that they can initially be added to a large existing table
without checking its initial contents, but new tuples must comply to
them; a separate pass invoked by ALTER TABLE / VALIDATE can verify
existing data and ensure it complies with the constraint, at which point
it is marked validated and becomes a normal part of the table ecosystem.
An non-validated CHECK constraint is ignored in the planner for
constraint_exclusion purposes; when validated, cached plans are
recomputed so that partitioning starts working right away.
This patch also enables domains to have unvalidated CHECK constraints
attached to them as well by way of ALTER DOMAIN / ADD CONSTRAINT / NOT
VALID, which can later be validated with ALTER DOMAIN / VALIDATE
CONSTRAINT.
Thanks to Thom Brown, Dean Rasheed and Jaime Casanova for the various
reviews, and Robert Hass for documentation wording improvement
suggestions.
This patch was sponsored by Enova Financial.
|
|
Initially, we use this only to eliminate calls to the varchar()
function in cases where the length is not being reduced and, therefore,
the function call is equivalent to a RelabelType operation. The most
significant effect of this is that we can avoid a table rewrite when
changing a varchar(X) column to a varchar(Y) column, where Y > X.
Noah Misch, reviewed by me and Alexey Klyukin
|
|
When recursing after an optimization in pull_up_sublinks_qual_recurse, the
available_rels value passed down must include only the relations that are
in the righthand side of the new SEMI or ANTI join; it's incorrect to pull
up a sub-select that refers to other relations, as seen in the added test
case. Per report from BangarRaju Vadapalli.
While at it, rethink the idea of recursing below a NOT EXISTS. That is
essentially the same situation as pulling up ANY/EXISTS sub-selects that
are in the ON clause of an outer join, and it has the same disadvantage:
we'd force the two joins to be evaluated according to the syntactic nesting
order, because the lower join will most likely not be able to commute with
the ANTI join. That could result in having to form a rather large join
product, whereas the handling of a correlated subselect is not quite that
dumb. So until we can handle those cases better, #ifdef NOT_USED that
case. (I think it's okay to pull up in the EXISTS/ANY cases, because SEMI
joins aren't so inflexible about ordering.)
Back-patch to 8.4, same as for previous patch in this area. Fortunately
that patch hadn't made it into any shipped releases yet.
|
|
|
|
This has never been supported, but we previously let md.c issue the
complaint for us at whatever point we tried to examine the backing file.
Now we print a nicer error message.
Per bug #6041, reported by Emanuel, and extensive discussion with Tom
Lane over where to put the check.
|
|
The existence of a btree opclass accepting composite types caused us to
assume that every composite type is sortable. This isn't true of course;
we need to check if the column types are all sortable. There was logic
for this for the case of array comparison (ie, check that the element
type is sortable), but we missed the point for rowtypes. Per Teodor's
report of an ANALYZE failure for an unsortable composite type.
Rather than just add some more ad-hoc logic for this, I moved knowledge of
the issue into typcache.c. The typcache will now only report out array_eq,
record_cmp, and friends as usable operators if the array or composite type
will work with those functions.
Unfortunately we don't have enough info to do this for anonymous RECORD
types; in that case, just assume it will work, and take the runtime failure
as before if it doesn't.
This patch might be a candidate for back-patching at some point, but
given the lack of complaints from the field, I'd rather just test it in
HEAD for now.
Note: most of the places touched in this patch will need further work
when we get around to supporting hashing of record types.
|
|
After finding an EXISTS or ANY sub-select that can be converted to a
semi-join or anti-join, we should recurse into the body of the sub-select.
This allows cases such as EXISTS-within-EXISTS to be optimized properly.
The original coding would leave the lower sub-select as a SubLink, which
is no better and often worse than what we can do with a join. Per example
from Wayne Conrad.
Back-patch to 8.4. There is a related issue in older versions' handling
of pull_up_IN_clauses, but they're lame enough anyway about the whole area
that it seems not worth the extra work to try to fix.
|
|
The previous coding failed to account properly for the costs of evaluating
the input expressions of aggregates and window functions, as seen in a
recent gripe from Claudio Freire. (I said at the time that it wasn't
counting these costs at all; but on closer inspection, it was effectively
charging these costs once per output tuple. That is completely wrong for
aggregates, and not exactly right for window functions either.)
There was also a hard-wired assumption that aggregates and window functions
had procost 1.0, which is now fixed to respect the actual cataloged costs.
The costing of WindowAgg is still pretty bogus, since it doesn't try to
estimate the effects of spilling data to disk, but that seems like a
separate issue.
|
|
This patch is almost entirely cosmetic --- mostly cleaning up a lot of
neglected comments, and fixing code layout problems in places where the
patch made lines too long and then pgindent did weird things with that.
I did find a bug-of-omission in equalTupleDescs().
|
|
The original coding assumed that such a case represents caller error, but
actually get_relation_info will omit generating an IndexOptInfo for any
index it thinks is unsafe to use. Therefore, handle this case by returning
"true" to indicate that a seqscan-and-sort is the preferred way to
implement the CLUSTER operation. New bug in 9.1, no backpatch needed.
Per bug #5985 from Daniel Grace.
|
|
Per spec we ought to apply select_common_collation() across the expressions
in each column of the VALUES table. The original coding was just taking
the first row and assuming it was representative.
This patch adds a field to struct RangeTblEntry to carry the resolved
collations, so initdb is forced for changes in stored rule representation.
|
|
This area was a few bricks shy of a load, and badly under-commented too.
We have to ensure that the generated targetlist entries for a set-operation
node expose the correct collation for each entry, since higher-level
processing expects the tlist to reflect the true ordering of the plan's
output.
This hackery wouldn't be necessary if SortGroupClause carried collation
info ... but making it do so would inject more pain in the parser than
would be saved here. Still, we might want to rethink that sometime.
|
|
Although rowcount estimates really ought not be NaN, a bug elsewhere
could perhaps result in that, and that would cause Assert failure in
cost_mergejoin, which I believe to be the explanation for bug #5977 from
Anton Kuznetsov. Seems like a good idea to expend a couple more cycles
to prevent that, even though the real bug is elsewhere. Not back-patching,
though, because we don't encourage running production systems with
Asserts on.
|
|
When we are doing GEQO join planning, the current memory context is a
short-lived context that will be reset at the end of geqo_eval(). However,
the RelOptInfos for base relations are set up before that and then re-used
across many GEQO cycles. Hence, any code that modifies a baserel during
join planning has to be careful not to put pointers to the short-lived
context into the baserel struct. mark_dummy_rel got this wrong, leading to
easy-to-reproduce-once-you-know-how crashes in 8.4, as reported off-list by
Leo Carson of SDSC. Some improvements made in 9.0 make it difficult to
demonstrate the crash in 9.0 or HEAD; but there's no doubt that there's
still a risk factor here, so patch all branches that have the function.
(Note: 8.3 has a similar function, but it's only applied to joinrels and
thus is not a hazard.)
|
|
Since collation is effectively an argument, not a property of the function,
FmgrInfo is really the wrong place for it; and this becomes critical in
cases where a cached FmgrInfo is used for varying purposes that might need
different collation settings. Fix by passing it in FunctionCallInfoData
instead. In particular this allows a clean fix for bug #5970 (record_cmp
not working). This requires touching a bit more code than the original
method, but nobody ever thought that collations would not be an invasive
patch...
|
|
This warning is new in gcc 4.6 and part of -Wall. This patch cleans
up most of the noise, but there are some still warnings that are
trickier to remove.
|
|
This is necessary, not optional, now that ILIKE and regexes are collation
aware --- else we might derive a wrong comparison constant for index
optimized pattern matches.
|
|
|
|
Get rid of bogus collation test in match_special_index_operator (even for
ILIKE, the pattern match operator's collation doesn't matter here, and even
if it did the test was testing the wrong thing).
Fix broken looping logic in expand_indexqual_rowcompare.
Add collation check in match_clause_to_ordering_op.
Make naming and argument ordering more consistent; improve comments.
|
|
Mostly cosmetic, though I did find that generateClonedIndexStmt failed
to clone the index's collations.
|
|
I'm not sure these have any non-cosmetic implications, but I'm not sure
they don't, either. In particular, ensure the CaseTestExpr generated
by transformAssignmentIndirection to represent the base target column
carries the correct collation, because parse_collate.c won't fix that.
Tweak lsyscache.c API so that we can get the appropriate collation
without an extra syscache lookup.
|
|
In nearly all cases, the caller already knows the correct collation, and
in a number of places, the value the caller has handy is more correct than
the default for the type would be. (In particular, this patch makes it
significantly less likely that eval_const_expressions will result in
changing the exposed collation of an expression.) So an internal lookup
is both expensive and wrong.
|
|
Turns out it was this, and not so much plpgsql, that was at fault in Stefan
Huehner's collation-error-in-a-trigger bug report of a couple weeks ago.
|
|
Ensure that parameter symbols receive collation from the function's
resolved input collation, and fix inlining to behave properly.
BTW, this commit lays about 90% of the infrastructure needed to support
use of argument names in SQL functions. Parsing of parameters is now
done via the parser-hook infrastructure ... we'd just need to supply
a column-ref hook ...
|
|
Instead of playing cute games with pathkeys, just build a direct
representation of the intended sub-select, and feed it through
query_planner to get a Path for the index access. This is a bit slower
than 9.1's previous method, since we'll duplicate most of the overhead of
query_planner; but since the whole optimization only applies to rather
simple single-table queries, that probably won't be much of a problem in
practice. The advantage is that we get to do the right thing when there's
a partial index that needs the implicit IS NOT NULL clause to be usable.
Also, although this makes planagg.c be a bit more closely tied to the
ordering of operations in grouping_planner, we can get rid of some coupling
to lower-level parts of the planner. Per complaint from Marti Raudsepp.
|
|
All expression nodes now have an explicit output-collation field, unless
they are known to only return a noncollatable data type (such as boolean
or record). Also, nodes that can invoke collation-aware functions store
a separate field that is the collation value to pass to the function.
This avoids confusion that arises when a function has collatable inputs
and noncollatable output type, or vice versa.
Also, replace the parser's on-the-fly collation assignment method with
a post-pass over the completed expression tree. This allows us to use
a more complex (and hopefully more nearly spec-compliant) assignment
rule without paying for it in extra storage in every expression node.
Fix assorted bugs in the planner's handling of collations by making
collation one of the defining properties of an EquivalenceClass and
by converting CollateExprs into discardable RelabelType nodes during
expression preprocessing.
|
|
Its mechanism for recovering after deleting the current list cell was
a bit klugy. Borrow the technique used in other places.
|
|
While this will give wrong answers when estimating selectivity for a
comparison operator that's using a non-default collation, the estimation
error probably won't be large; and anyway the former approach created
estimation errors of its own by trying to use a histogram that might have
been computed with some other collation. So we'll adopt this simplified
approach for now and perhaps improve it sometime in the future.
This patch incorporates changes from Andres Freund to make sure that
selfuncs.c passes a valid collation OID to any datatype-specific function
it calls, in case that function wants collation information. Said OID will
now always be DEFAULT_COLLATION_OID, but at least we won't get errors.
|
|
CollateClause is now used only in raw grammar output, and CollateExpr after
parse analysis. This is for clarity and to avoid carrying collation names
in post-analysis parse trees: that's both wasteful and possibly misleading,
since the collation's name could be changed while the parsetree still
exists.
Also, clean up assorted infelicities and omissions in processing of the
node type.
|
|
This patch implements data-modifying WITH queries according to the
semantics that the updates all happen with the same command counter value,
and in an unspecified order. Therefore one WITH clause can't see the
effects of another, nor can the outer query see the effects other than
through the RETURNING values. And attempts to do conflicting updates will
have unpredictable results. We'll need to document all that.
This commit just fixes the code; documentation updates are waiting on
author.
Marko Tiikkaja and Hitoshi Harada
|
|
The recent additions for FDW support required checking foreign-table-ness
in several places in the parse/plan chain. While it's not clear whether
that would really result in a noticeable slowdown, it seems best to avoid
any performance risk by keeping a copy of the relation's relkind in
RangeTblEntry. That might have some other uses later, anyway.
Per discussion.
|
