| Age | Commit message (Collapse) | Author |
|---|
|
to avoid sharing substructure with the lower-level indexquals. This is
currently only an issue if there are SubPlans in the indexquals, which is
uncommon but not impossible --- see bug #2218 reported by Nicholas Vinen.
We use the same kluge for indexqual vs indexqualorig in the index scans
themselves ... would be nice to clean this up someday.
|
|
|
|
requested sort order. It was assuming that build_index_pathkeys always
generates a pathkey per index column, which was not true if implied equality
deduction had determined that two index columns were effectively equated to
each other. Simplest fix seems to be to install an option that causes
build_index_pathkeys to support this behavior as well as the original one.
Per report from Brian Hirt.
|
|
and rely exclusively on the SQL type system to tell the difference between
the types. Prevent creation of invalid CIDR values via casting from INET
or set_masklen() --- both of these operations now silently zero any bits
to the right of the netmask. Remove duplicate CIDR comparison operators,
letting the type rely on the INET operators instead.
|
|
This completes the project to upgrade our handling of row comparisons.
|
|
but a lot better than nothing at all ...
|
|
http://archives.postgresql.org/pgsql-hackers/2006-01/msg00151.php for the
complete plan.
|
|
(previously we only did = and <> correctly). Also, allow row comparisons
with any operators that are in btree opclasses, not only those with these
specific names. This gets rid of a whole lot of indefensible assumptions
about the behavior of particular operators based on their names ... though
it's still true that IN and NOT IN expand to "= ANY". The patch adds a
RowCompareExpr expression node type, and makes some changes in the
representation of ANY/ALL/ROWCOMPARE SubLinks so that they can share code
with RowCompareExpr.
I have not yet done anything about making RowCompareExpr an indexable
operator, but will look at that soon.
initdb forced due to changes in stored rules.
|
|
Per my recent proposal. I ended up basing the implementation on the
existing mechanism for enforcing valid join orders of IN joins --- the
rules for valid outer-join orders are somewhat similar.
|
|
clauses even if it's an outer join. This is a corner case since such
clauses could only arise from weird OUTER JOIN ON conditions, but worth
fixing. Per example from Ron at cheapcomplexdevices.com.
|
|
#2075: consider an index redundant if any of its index conditions were already
used, rather than if all of them were. Also, make the selectivity comparison
a bit fuzzy, so that very small differences in estimated selectivities don't
skew the results.
|
|
they were broken-out AND or OR lists. The least grotty way to do this
seemed to be to set up a general mechanism for handling nodes as though
they were ANDs or ORs. There's no other immediate use for it, but perhaps
we might want to use the mechanism someday for things like BETWEEN
SYMMETRIC.
|
|
"ctid IN (list)" will still work after we convert IN to ScalarArrayOpExpr.
Make some minor efficiency improvements while at it, such as ensuring that
multiple TIDs are fetched in physical heap order. And fix EXPLAIN so that
it shows what's really going on for a TID scan.
|
|
a palloc or two in the OpExpr case.
|
|
qualification when the underlying operator is indexable and useOr is true.
That is, indexkey op ANY (ARRAY[...]) is effectively translated into an
OR combination of one indexscan for each array element. This only works
for bitmap index scans, of course, since regular indexscans no longer
support OR'ing of scans. There are still some loose ends to clean up
before changing 'x IN (list)' to translate as a ScalarArrayOpExpr;
for instance predtest.c ought to be taught about it. But this gets the
basic functionality in place.
|
|
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
|
|
functionality, but I still need to make another pass looking at places
that incidentally use arrays (such as ACL manipulation) to make sure they
are null-safe. Contrib needs work too.
I have not changed the behaviors that are still under discussion about
array comparison and what to do with lower bounds.
|
|
its result when the clause was an OR clause. Brain fade exposed by
example from Sebastian BÎck.
|
|
sense and rename to "outerjoin_delayed" to more clearly reflect what it
means). I had decided that it was redundant in 8.1, but the folly of this
is exposed by a bug report from Sebastian Böck. The place where it's
needed is to prevent orindxpath.c from cherry-picking arms of an outer-join
OR clause to form a relation restriction that isn't actually legal to push
down to the relation scan level. There may be some legal cases that this
forbids optimizing, but we'd need much closer analysis to determine it.
|
|
to ensure that SubqueryScan elimination doesn't change the behavior of
reporting of original column sources.
|
|
from a finished plan tree. We have to copy the output column names
(resname fields) from the SubqueryScan down to its child plan node;
else, if this is the topmost level of the plan, the wrong column names
will be delivered to the client. Per bug #2017 reported by Jolly Chen.
|
|
for an outer join; symptom is bogus error "RIGHT JOIN is only supported with
merge-joinable join conditions". Problem was that select_mergejoin_clauses
did its tests in the wrong order. We need to force left join not right join
for a merge join when there are non-mergeable join clauses; but the test for
this only accounted for mergejoinability of the clause operator, and not
whether the left and right Vars were of the proper relations. Per report
from Jean-Pierre Pelletier.
|
|
optimization for subquery and function scan nodes: we can't just do it
unconditionally, we still have to check whether there is any need for
a whole-row Var. I had been thinking that these node types couldn't
have any system columns, which is true, but that loop is also checking
for attno zero, ie, whole-row Var. Fix comment to not be so misleading.
Per test case from Richard Huxton.
|
|
|
|
make_restrictinfo_from_bitmapqual. The likelihood of finding duplicates
seems much less than in the AND-subclause case, and the cost much higher,
because OR lists with hundreds or even thousands of subclauses are not
uncommon. Per discussion with Ilia Kantor and andrew@supernews.
|
|
A RestrictInfo representing an OR clause now contains two versions of
the contained expression, one with sub-RestrictInfos and one without.
clause_selectivity() should descend to the version with sub-RestrictInfos
so that it has a chance of caching its results for the OR's sub-clauses.
Failing to do so resulted in redundant planner effort.
|
|
predicate_implied_by() to detect redundant filter conditions, but forgot
that predicate_implied_by() assumes its first argument contains only
immutable functions. Add a check to guarantee that. Also, test to see
if filter conditions can be discarded because they are redundant with
the predicate of a partial index.
|
|
comment, it can at least test whether the expression returns set.
|
|
only the inner-side relation would be considered as potential equijoin clauses,
which is wrong because the condition doesn't necessarily hold above the point
of the outer join. Per test case from Kevin Grittner (bug#1916).
|
|
|
|
"optimization". When we find a potentially useful joinclause, we
have to add all its other required_relids to the result, not only the
other clause_relids. They are different in the case of a joinclause
whose applicability has to be postponed due to outer join. We have
to include the extra rels because otherwise, after best_inner_indexscan
masks the join rels with index_outer_relids, it will always fail to
find the joinclause as applicable. Per report from Husam Tomeh.
|
|
Per report from Cesar Paipilla.
|
|
when there are extra resjunk columns in the child node. I found some
additional cases involving Append nodes that weren't handled by the
prior patch, and it's not clear how to fix them in the same way without
breaking inheritance cases. So the prudent path seems to be to narrow
the scope of the optimization.
|
|
has to recopy the input plan node's targetlist if it removes a
SubqueryScan node just below the non-projecting node. For simplicity
I made it recopy always. Per bug report from Allan Wang and Michael Fuhr.
|
|
got an empty bitmap after any step; the remaining subplans can no longer
affect the result. Per a suggestion from Ilia Kantor.
|
|
are cases where it appears to have zero run cost.
|
|
so that the latter estimates the number of groups that grouping will
produce. This is needed because it is primarily query_planner that
makes the decision between fast-start and fast-finish plans, and in the
original coding it was unable to make more than a crude rule-of-thumb
choice when the query involved grouping. This revision helps us make
saner choices for queries like SELECT ... GROUP BY ... LIMIT, as in a
recent example from Mark Kirkwood. Also move the responsibility for
canonicalizing sort_pathkeys and group_pathkeys into query_planner;
this information has to be available anyway to support the first change,
and doing it this way lets us get rid of compare_noncanonical_pathkeys
entirely.
|
|
to copy the whole plan tree before invoking adjust_plan_varnos(); else
if there is any multiply-linked substructure, the latter might increment
some Var's varno twice. Previously there were some retail copyObject
calls inside adjust_plan_varnos, but it seems a lot safer to just dup the
whole tree first. Also, set_inner_join_references was trying to avoid
work by not recursing if a BitmapHeapScan's bitmapqualorig contained no
outer references; which was OK at the time the code was written, I think,
but now that create_bitmap_scan_plan removes duplicate clauses from
bitmapqualorig it is possible for that field to be NULL while outer
references still remain in the qpqual and/or contained indexscan nodes.
For safety, always recurse even if the BitmapHeapScan looks to be outer
reference free. Per reports from Michael Fuhr and Oleg Bartunov.
|
|
functional difference really, but make use of stuff added to the planner
since this code was touched last.
|
|
Also improve wording.
|
|
or OFFSET clauses by using estimate_expression_value(). The main advantage
of this is that if the expression is a Param and we have a value for the
Param, we'll use that value rather than defaulting. Also, fix some
thinkos in the logic for combining LIMIT/OFFSET with an externally
supplied tuple fraction (this covers cases like EXISTS(...LIMIT...)).
And make sure the results of all this are shown by EXPLAIN. Per a
gripe from Merlin Moncure.
|
|
an inheritance tree. Per recent discussions.
|
|
Original patch by Hans-Juergen Schoenig, revisions by Karel Zak
and Tom Lane.
|
|
continue to recurse after eliminating a NOT-below-a-NOT, since the
contained subexpression will now be part of the top-level AND/OR structure
and so deserves to be simplified. The real-world impact of this is
probably minimal, since it'd require at least three levels of NOT to make
a difference, but it's still a bug.
Also remove some redundant tests for NULL subexpressions.
|
|
where applicable.
|
|
planning logic for bitmap indexscans. Partial indexes create corner
cases in which a scan might be done with no explicit index qual conditions,
and the code wasn't handling those cases nicely. Also be a little
tenser about eliminating redundant clauses in the generated plan.
Per report from Dmitry Karasik.
|
|
scans are candidates for exclusion; this should be fixed eventually.
Simon Riggs, with some help from Tom Lane.
|
|
coding would ignore startup cost differences of less than 1% of the
estimated total cost; which was OK for normal planning but highly not OK
if a very small LIMIT was applied afterwards, so that startup cost becomes
the name of the game. Instead, compare startup and total costs fuzzily
but independently. This changes the plan selected for two queries in the
regression tests; adjust expected-output files for resulting changes in
row order. Per reports from Dawid Kuroczko and Sam Mason.
|
|
output targetlist of the Unique or HashAgg plan. This code was OK when
written, but subsequent changes to use "physical tlists" where possible
had broken it: given an input subplan that has extra variables added to
avoid a projection step, it would copy those extra variables into the
upper tlist, which is pointless since a projection has to happen anyway.
|
|
cases: we can't just consider whether the subquery's output is unique on its
own terms, we have to check whether the set of output columns we are going to
use will be unique. Per complaint from Luca Pireddu and test case from
Michael Fuhr.
|
