| Age | Commit message (Collapse) | Author |
|---|
|
Postgres has traditionally considered the syntactic forms f(x) and x.f
to be equivalent, allowing tricks such as writing a function and then
using it as though it were a computed-on-demand column. However, our
behavior when both interpretations are feasible left something to be
desired: we always chose the column interpretation. This could lead
to very surprising results, as in a recent bug report from Neil Conway.
It also created a dump-and-reload hazard, since what was a function
call in a dumped view could get interpreted as a column reference
at reload, if a matching column name had been added to the underlying
table since the view was created.
What seems better, in ambiguous situations, is to prefer the choice
matching the syntactic form of the reference. This seems much less
astonishing in general, and it fixes the dump/reload hazard.
Although this could be called a bug fix, there have been few complaints
and there's some small risk of breaking applications that depend on the
old behavior, so no back-patch. It does seem reasonable to slip it
into v11, though.
Discussion: https://postgr.es/m/CAOW5sYa3Wp7KozCuzjOdw6PiOYPi6D=VvRybtH2S=2C0SVmRmA@mail.gmail.com
|
|
Recent additions to ParseFuncOrColumn to make it reject non-procedure
functions in CALL were neither adequate nor documented. Reorganize
the code to ensure uniform results for all the cases that should be
rejected. Also, use ERRCODE_WRONG_OBJECT_TYPE for this case as well
as the converse case of a procedure in a non-CALL context. The
original coding used ERRCODE_UNDEFINED_FUNCTION which seems wrong,
and is certainly inconsistent with the adjacent wrong-kind-of-routine
errors.
This reorganization also causes the checks for aggregate decoration with
a non-aggregate function to be made in the FUNCDETAIL_COERCION case;
that they were not is a long-standing oversight.
Discussion: https://postgr.es/m/14497.1529089235@sss.pgh.pa.us
|
|
This complies with the perlcritic policy
Subroutines::RequireFinalReturn, which is a severity 4 policy. Since we
only currently check at severity level 5, the policy is raised to that
level until we move to level 4 or lower, so that any new infringements
will be caught.
A small cosmetic piece of tidying of the pgperlcritic script is
included.
Mike Blackwell
Discussion: https://postgr.es/m/CAESHdJpfFm_9wQnQ3koY3c91FoRQsO-fh02za9R3OEMndOn84A@mail.gmail.com
|
|
OFFSET <x> ROWS FETCH FIRST <y> ROWS ONLY syntax is supposed to accept
<simple value specification>, which includes parameters as well as
literals. When this syntax was added all those years ago, it was done
inconsistently, with <x> and <y> being different subsets of the
standard syntax.
Rectify that by making <x> and <y> accept the same thing, and allowing
either a (signed) numeric literal or a c_expr there, which allows for
parameters, variables, and parenthesized arbitrary expressions.
Per bug #15200 from Lukas Eder.
Backpatch all the way, since this has been broken from the start.
Discussion: https://postgr.es/m/877enz476l.fsf@news-spur.riddles.org.uk
Discussion: http://postgr.es/m/152647780335.27204.16895288237122418685@wrigleys.postgresql.org
|
|
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
|
|
|
|
Discussion: https://postgr.es/m/15719.1523984266@sss.pgh.pa.us
|
|
Previously, you could partition by a boolean column as long as you
spelled the bound values as string literals, for instance FOR VALUES
IN ('t'). The trouble with this is that ruleutils.c printed that as
FOR VALUES IN (TRUE), which is reasonable syntax but wasn't accepted by
the grammar. That results in dump-and-reload failures for such cases.
Apply a minimal fix that just causes TRUE and FALSE to be converted to
strings 'true' and 'false'. This is pretty grotty, but it's too late for
a more principled fix in v11 (to say nothing of v10). We should revisit
the whole issue of how partition bound values are parsed for v12.
Amit Langote
Discussion: https://postgr.es/m/e05c5162-1103-7e37-d1ab-6de3e0afaf70@lab.ntt.co.jp
|
|
There's been a massive addition of partitioning code in PostgreSQL 11,
with little oversight on its placement, resulting in a
catalog/partition.c with poorly defined boundaries and responsibilities.
This commit tries to set a couple of distinct modules to separate things
a little bit. There are no code changes here, only code movement.
There are three new files:
src/backend/utils/cache/partcache.c
src/include/partitioning/partdefs.h
src/include/utils/partcache.h
The previous arrangement of #including catalog/partition.h almost
everywhere is no more.
Authors: Amit Langote and Álvaro Herrera
Discussion: https://postgr.es/m/98e8d509-790a-128c-be7f-e48a5b2d8d97@lab.ntt.co.jp
https://postgr.es/m/11aa0c50-316b-18bb-722d-c23814f39059@lab.ntt.co.jp
https://postgr.es/m/143ed9a4-6038-76d4-9a55-502035815e68@lab.ntt.co.jp
https://postgr.es/m/20180413193503.nynq7bnmgh6vs5vm@alvherre.pgsql
|
|
- Explicitly forbids opclass, collation and indoptions (like DESC/ASC etc) for
including columns. Throw an error if user points that.
- Truncated storage arrays for such attributes to store only key atrributes,
added assertion checks.
- Do not check opfamily and collation for including columns in
CompareIndexInfo()
Discussion: https://www.postgresql.org/message-id/5ee72852-3c4e-ee35-e2ed-c1d053d45c08@sigaev.ru
|
|
This reverts commits d204ef63776b8a00ca220adec23979091564e465,
83454e3c2b28141c0db01c7d2027e01040df5249 and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
|
|
Traditionally, include/catalog/pg_foo.h contains extern declarations
for functions in backend/catalog/pg_foo.c, in addition to its function
as the authoritative definition of the pg_foo catalog's rowtype.
In some cases, we'd been forced to split out those extern declarations
into separate pg_foo_fn.h headers so that the catalog definitions
could be #include'd by frontend code. That problem is gone as of
commit 9c0a0de4c, so let's undo the splits to make things less
confusing.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
|
|
This patch introduces INCLUDE clause to index definition. This clause
specifies a list of columns which will be included as a non-key part in
the index. The INCLUDE columns exist solely to allow more queries to
benefit from index-only scans. Also, such columns don't need to have
appropriate operator classes. Expressions are not supported as INCLUDE
columns since they cannot be used in index-only scans.
Index access methods supporting INCLUDE are indicated by amcaninclude flag
in IndexAmRoutine. For now, only B-tree indexes support INCLUDE clause.
In B-tree indexes INCLUDE columns are truncated from pivot index tuples
(tuples located in non-leaf pages and high keys). Therefore, B-tree indexes
now might have variable number of attributes. This patch also provides
generic facility to support that: pivot tuples contain number of their
attributes in t_tid.ip_posid. Free 13th bit of t_info is used for indicating
that. This facility will simplify further support of index suffix truncation.
The changes of above are backward-compatible, pg_upgrade doesn't need special
handling of B-tree indexes for that.
Bump catalog version
Author: Anastasia Lubennikova with contribition by Alexander Korotkov and me
Reviewed by: Peter Geoghegan, Tomas Vondra, Antonin Houska, Jeff Janes,
David Rowley, Alexander Korotkov
Discussion: https://www.postgresql.org/message-id/flat/56168952.4010101@postgrespro.ru
|
|
Separation of parser data structures from executor, as
requested by Tom Lane. Further improvements possible.
While there, implement error for multiple VALUES clauses via parser
to allow line number of error, as requested by Andres Freund.
Author: Pavan Deolasee
Discussion: https://www.postgresql.org/message-id/CABOikdPpqjectFchg0FyTOpsGXyPoqwgC==OLKWuxgBOsrDDZw@mail.gmail.com
|
|
Use of a C++ keyword as a function name caused problems
Reported-by: Álvaro Herrera
|
|
Review comments from Andres Freund
* Consolidate code into AfterTriggerGetTransitionTable()
* Rename nodeMerge.c to execMerge.c
* Rename nodeMerge.h to execMerge.h
* Move MERGE handling in ExecInitModifyTable()
into a execMerge.c ExecInitMerge()
* Move mt_merge_subcommands flags into execMerge.h
* Rename opt_and_condition to opt_merge_when_and_condition
* Wordsmith various comments
Author: Pavan Deolasee
Reviewer: Simon Riggs
|
|
Author: Álvaro Herrera
Discussion: https://postgr.es/m/20171231194359.cvojcour423ulha4@alvherre.pgsql
Reviewed-by: Peter Eisentraut
|
|
Author: Peter Geoghegan
Recursive support removed, no tests
Docs added by me
|
|
|
|
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
|
|
This reverts commit e6597dc3533946b98acba7871bd4ca1f7a3d4c1d.
|
|
This reverts commit 354f13855e6381d288dfaa52bcd4f2cb0fd4a5eb.
|
|
|
|
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewers: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
|
|
Commit eb7ed3f30634 enabled unique constraints on partitioned tables,
but one thing that was not working properly is INSERT/ON CONFLICT.
This commit introduces a new node keeps state related to the ON CONFLICT
clause per partition, and fills it when that partition is about to be
used for tuple routing.
Author: Amit Langote, Álvaro Herrera
Reviewed-by: Etsuro Fujita, Pavan Deolasee
Discussion: https://postgr.es/m/20180228004602.cwdyralmg5ejdqkq@alvherre.pgsql
|
|
For years, our makefiles have correctly observed that "there is no correct
way to write a rule that generates two files". However, what we did is to
provide empty rules that "generate" the secondary output files from the
primary one, and that's not right either. Depending on the details of
the creating process, the primary file might end up timestamped later than
one or more secondary files, causing subsequent make runs to consider the
secondary file(s) out of date. That's harmless in a plain build, since
make will just re-execute the empty rule and nothing happens. But it's
fatal in a VPATH build, since make will expect the secondary file to be
rebuilt in the build directory. This would manifest as "file not found"
failures during VPATH builds from tarballs, if we were ever unlucky enough
to ship a tarball with apparently out-of-date secondary files. (It's not
clear whether that has ever actually happened, but it definitely could.)
To ensure that secondary output files have timestamps >= their primary's,
change our makefile convention to be that we provide a "touch $@" action
not an empty rule. Also, make sure that this rule actually gets invoked
during a distprep run, else the hazard remains.
It's been like this a long time, so back-patch to all supported branches.
In HEAD, I skipped the changes in src/backend/catalog/Makefile, because
those rules are due to get replaced soon in the bootstrap data format
patch, and there seems no need to create a merge issue for that patch.
If for some reason we fail to land that patch in v11, we'll need to
back-fill the changes in that one makefile from v10.
Discussion: https://postgr.es/m/18556.1521668179@sss.pgh.pa.us
|
|
|
|
Instead of embedding the savepoint name in a list and then requiring
complex code to unpack it, just add another struct field to store it
directly.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
|
|
Several places used similar code to convert a string to an int, so take
the function that we already had and make it globally available.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
|
|
A Value node would store an integer as a long. This causes needless
portability risks, as long can be of varying sizes. Change it to use
int instead. All code using this was already careful to only store
32-bit values anyway.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
|
|
Apparently, it doesn't work to use a plain cstring as a Name datum: you
may end up having random bytes because of failing to zero the bytes
after the terminating \0, as indicated by valgrind. I introduced this
bug in 5564c1181548, so backpatch this fix to REL_10_STABLE, like that
commit.
While at it, fix a slightly misleading comment, pointed out by David
Rowley.
|
|
This is analogous to the syntax allowed for VACUUM. This allows us to
avoid making new options reserved keywords and makes it easier to
allow arbitrary argument order. Oh, and it's consistent with the other
commands, too.
Author: Nathan Bossart
Reviewed-By: Michael Paquier, Masahiko Sawada
Discussion: https://postgr.es/m/D3FC73E2-9B1A-4DB4-8180-55F57D116B4E@amazon.com
|
|
The LIKE INCLUDING ALL clause to CREATE TABLE intuitively indicates
cloning of extended statistics on the source table, but it failed to do
so. Patch it up so that it does. Also include an INCLUDING STATISTICS
option to the LIKE clause, so that the behavior can be requested
individually, or excluded individually.
While at it, reorder the INCLUDING options, both in code and in docs, in
alphabetical order which makes more sense than feature-implementation
order that was previously used.
Backpatch this to Postgres 10, where extended statistics were
introduced, because this is seen as an oversight in a fresh feature
which is better to get consistent from the get-go instead of changing
only in pg11.
In pg11, comments on statistics objects are cloned too. In pg10 they
are not, because I (Álvaro) was too coward to change the parse node as
required to support it. Also, in pg10 I chose not to renumber the
parser symbols for the various INCLUDING options in LIKE, for the same
reason. Any corresponding user-visible changes (docs) are backpatched,
though.
Reported-by: Stephen Froehlich
Author: David Rowley
Reviewed-by: Álvaro Herrera, Tomas Vondra
Discussion: https://postgr.es/m/CY1PR0601MB1927315B45667A1B679D0FD5E5EF0@CY1PR0601MB1927.namprd06.prod.outlook.com
|
|
The new column distinguishes normal functions, procedures, aggregates,
and window functions. This replaces the existing columns proisagg and
proiswindow, and replaces the convention that procedures are indicated
by prorettype == 0. Also change prorettype to be VOIDOID for procedures.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
|
|
To support parameters in CALL, move the parse analysis of the procedure
and arguments into the global transformation phase, so that the parser
hooks can be applied. And then at execution time pass the parameters
from ProcessUtility on to ExecuteCallStmt.
|
|
If we restrict unique constraints on partitioned tables so that they
must always include the partition key, then our standard approach to
unique indexes already works --- each unique key is forced to exist
within a single partition, so enforcing the unique restriction in each
index individually is enough to have it enforced globally. Therefore we
can implement unique indexes on partitions by simply removing a few
restrictions (and adding others.)
Discussion: https://postgr.es/m/20171222212921.hi6hg6pem2w2t36z@alvherre.pgsql
Discussion: https://postgr.es/m/20171229230607.3iib6b62fn3uaf47@alvherre.pgsql
Reviewed-by: Simon Riggs, Jesper Pedersen, Peter Eisentraut, Jaime
Casanova, Amit Langote
|
|
The modern way is to use a missing_ok argument instead of two separate
almost-identical routines, so do that.
Author: Michaël Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/20180201063212.GE6398@paquier.xyz
|
|
CALL statements cannot support sub-SELECTs in the arguments of the called
procedure, since they just use ExecEvalExpr to evaluate such arguments.
Teach transformSubLink() to reject the case, as it already does for other
contexts in which subqueries are not supported.
In passing, s/EXPR_KIND_CALL/EXPR_KIND_CALL_ARGUMENT/ to make that enum
symbol line up more closely with the phrasing of the error messages it is
associated with. And fix someone's weak grasp of English grammar in the
preceding EXPR_KIND_PARTITION_EXPRESSION addition. Also update an
incorrect comment in resolve_unique_index_expr (possibly it was correct
when written, but nowadays transformExpr definitely does reject SRFs here).
Per report from Pavel Stehule --- but this resolves only one of the bugs
he mentions.
Discussion: https://postgr.es/m/CAFj8pRDxOwPPzpA8i+AQeDQFj7bhVw-dR2==rfWZ3zMGkm568Q@mail.gmail.com
|
|
This patch adds the ability to use "RANGE offset PRECEDING/FOLLOWING"
frame boundaries in window functions. We'd punted on that back in the
original patch to add window functions, because it was not clear how to
do it in a reasonably data-type-extensible fashion. That problem is
resolved here by adding the ability for btree operator classes to provide
an "in_range" support function that defines how to add or subtract the
RANGE offset value. Factoring it this way also allows the operator class
to avoid overflow problems near the ends of the datatype's range, if it
wishes to expend effort on that. (In the committed patch, the integer
opclasses handle that issue, but it did not seem worth the trouble to
avoid overflow failures for datetime types.)
The patch includes in_range support for the integer_ops opfamily
(int2/int4/int8) as well as the standard datetime types. Support for
other numeric types has been requested, but that seems like suitable
material for a follow-on patch.
In addition, the patch adds GROUPS mode which counts the offset in
ORDER-BY peer groups rather than rows, and it adds the frame_exclusion
options specified by SQL:2011. As far as I can see, we are now fully
up to spec on window framing options.
Existing behaviors remain unchanged, except that I changed the errcode
for a couple of existing error reports to meet the SQL spec's expectation
that negative "offset" values should be reported as SQLSTATE 22013.
Internally and in relevant parts of the documentation, we now consistently
use the terminology "offset PRECEDING/FOLLOWING" rather than "value
PRECEDING/FOLLOWING", since the term "value" is confusingly vague.
Oliver Ford, reviewed and whacked around some by me
Discussion: https://postgr.es/m/CAGMVOdu9sivPAxbNN0X+q19Sfv9edEPv=HibOJhB14TJv_RCQg@mail.gmail.com
|
|
Investigation of 2d2d06b7e27e3177d5bef0061801c75946871db3 revealed that
identity values were not applied in some further cases, including
logical replication subscribers, VALUES RTEs, and ALTER TABLE ... ADD
COLUMN. To fix all that, apply the identity column expression in
build_column_default() instead of repeating the same logic at each call
site.
For ALTER TABLE ... ADD COLUMN ... IDENTITY, the previous coding
completely ignored that existing rows for the new column should have
values filled in from the identity sequence. The coding using
build_column_default() fails for this because the sequence ownership
isn't registered until after ALTER TABLE, and we can't do it before
because we don't have the column in the catalog yet. So we specially
remember in ColumnDef the sequence name that we decided on and build a
custom NextValueExpr using that.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
|
Along the way, also fix code indentation.
Alexander Lakhin, reviewed by Michael Paquier
Discussion: http://postgr.es/m/45c44aa7-7cfa-7f3b-83fd-d8300677fdda@gmail.com
|
|
We have a lot of code in which option names, which from the user's
viewpoint are logically keywords, are passed through the grammar as plain
identifiers, and then matched to string literals during command execution.
This approach avoids making words into lexer keywords unnecessarily. Some
places matched these strings using plain strcmp, some using pg_strcasecmp.
But the latter should be unnecessary since identifiers would have been
downcased on their way through the parser. Aside from any efficiency
concerns (probably not a big factor), the lack of consistency in this area
creates a hazard of subtle bugs due to different places coming to different
conclusions about whether two option names are the same or different.
Hence, standardize on using strcmp() to match any option names that are
expected to have been fed through the parser.
This does create a user-visible behavioral change, which is that while
formerly all of these would work:
alter table foo set (fillfactor = 50);
alter table foo set (FillFactor = 50);
alter table foo set ("fillfactor" = 50);
alter table foo set ("FillFactor" = 50);
now the last case will fail because that double-quoted identifier is
different from the others. However, none of our documentation says that
you can use a quoted identifier in such contexts at all, and we should
discourage doing so since it would break if we ever decide to parse such
constructs as true lexer keywords rather than poor man's substitutes.
So this shouldn't create a significant compatibility issue for users.
Daniel Gustafsson, reviewed by Michael Paquier, small changes by me
Discussion: https://postgr.es/m/29405B24-564E-476B-98C0-677A29805B84@yesql.se
|
|
This clause was superseded by SQL-standard syntax back in 7.3.
We've kept it around for backwards-compatibility purposes ever since;
but 15 years seems like long enough for that, especially seeing that
there are undocumented weirdnesses in how it interacts with the
SQL-standard syntax for specifying the same options.
Michael Paquier, per an observation by Daniel Gustafsson;
some small cosmetic adjustments to nearby code by me.
Discussion: https://postgr.es/m/20180115022748.GB1724@paquier.xyz
|
|
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
|
There used to be a lot of different *Type and *Kind symbol groups to
address objects within different commands, most of which have been
replaced by ObjectType, starting with
b256f2426433c56b4bea3a8102757749885b81ba. But this conversion was never
done for the ACL commands until now.
This change ends up being just a plain replacement of the types and
symbols, without any code restructuring needed, except deleting some now
redundant code.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Stephen Frost <sfrost@snowman.net>
|
|
When CREATE INDEX is run on a partitioned table, create catalog entries
for an index on the partitioned table (which is just a placeholder since
the table proper has no data of its own), and recurse to create actual
indexes on the existing partitions; create them in future partitions
also.
As a convenience gadget, if the new index definition matches some
existing index in partitions, these are picked up and used instead of
creating new ones. Whichever way these indexes come about, they become
attached to the index on the parent table and are dropped alongside it,
and cannot be dropped on isolation unless they are detached first.
To support pg_dump'ing these indexes, add commands
CREATE INDEX ON ONLY <table>
(which creates the index on the parent partitioned table, without
recursing) and
ALTER INDEX ATTACH PARTITION
(which is used after the indexes have been created individually on each
partition, to attach them to the parent index). These reconstruct prior
database state exactly.
Reviewed-by: (in alphabetical order) Peter Eisentraut, Robert Haas, Amit
Langote, Jesper Pedersen, Simon Riggs, David Rowley
Discussion: https://postgr.es/m/20171113170646.gzweigyrgg6pwsg4@alvherre.pgsql
|
|
There are plans to extend the syntax for ANALYZE, so we need to break
the link between VacuumStmt and AnalyzeStmt. But apart from that, the
syntax above is undocumented and, if discovered by users, might give
the impression that the VERBOSE option for VACUUM differs from the
verbose option from ANALYZE, which it does not.
Nathan Bossart, reviewed by Michael Paquier and Masahiko Sawada
Discussion: http://postgr.es/m/D3FC73E2-9B1A-4DB4-8180-55F57D116B4E@amazon.com
|
|
Backpatch-through: certain files through 9.3
|
|
Author: Ashutosh Bapat <ashutosh.bapat@enterprisedb.com>
Reported-by: Rushabh Lathia <rushabh.lathia@gmail.com>
|
|
Reported by Robins Tharakan
|
