| Age | Commit message (Collapse) | Author |
|---|
|
There are two ways to track a snapshot: there's the "registered" list, which
is used for arbitrary long-lived snapshots; and there's the "active stack",
which is used for the snapshot that is considered "active" at any time.
This also allows users of snapshots to stop worrying about snapshot memory
allocation and freeing, and about using PG_TRY blocks around ActiveSnapshot
assignment. This is all done automatically now.
As a consequence, this allows us to reset MyProc->xmin when there are no
more snapshots registered in the current backend, reducing the impact that
long-running transactions have on VACUUM.
|
|
Per complaint from Tom Lane.
|
|
snapmgmt.c file for the former. The header files have also been reorganized
in three parts: the most basic snapshot definitions are now in a new file
snapshot.h, and the also new snapmgmt.h keeps the definitions for snapmgmt.c.
tqual.h has been reduced to the bare minimum.
This patch is just a first step towards managing live snapshots within a
transaction; there is no functionality change.
Per my proposal to pgsql-patches on 20080318191940.GB27458@alvh.no-ip.org and
subsequent discussion.
|
|
|
|
fixup various places in the tree that were clearing a StringInfo by hand.
Making this function a part of the API simplifies client code slightly,
and avoids needlessly peeking inside the StringInfo interface.
|
|
back-stamped for this.
|
|
a fastpath function call.
|
|
|
|
than being equivalent to setting log_min_duration_statement to zero, this
option now forces logging of all query durations, but doesn't force logging
of query text. Also, add duration logging coverage for fastpath function
calls.
|
|
|
|
Strip unused include files out unused include files, and add needed
includes to C files.
The next step is to remove unused include files in C files.
|
|
|
|
function call. Previously, there may have been no CHECK_FOR_INTERRUPTS
at all in the fastpath code path, making it impossible to cancel an
operation such as \lo_import externally. This addition doesn't ensure
you can cancel, since your SIGINT may arrive while the backend is idle
waiting for the client, but it gives the largest window we can easily
provide. Noted while experimenting with new control-C code for psql.
|
|
already-aborted transaction block. GetSnapshotData throws an Assert if
not in a valid transaction; hence we mustn't attempt to set a snapshot
for the function until after checking for aborted transaction. This is
harmless AFAICT if Asserts aren't enabled (GetSnapshotData will compute
a bogus snapshot, but it doesn't matter since HandleFunctionRequest will
throw an error shortly anywy). Hence, not a major bug.
Along the way, add some ability to log fastpath calls when statement
logging is turned on. This could probably stand to be improved further,
but not logging anything is clearly undesirable.
Backpatched as far as 8.0; bug doesn't exist before that.
|
|
functions are not strict, they will be called (passing a NULL first parameter)
during any attempt to input a NULL value of their datatype. Currently, all
our input functions are strict and so this commit does not change any
behavior. However, this will make it possible to build domain input functions
that centralize checking of domain constraints, thereby closing numerous holes
in our domain support, as per previous discussion.
While at it, I took the opportunity to introduce convenience functions
InputFunctionCall, OutputFunctionCall, etc to use in code that calls I/O
functions. This eliminates a lot of grotty-looking casts, but the main
motivation is to make it easier to grep for these places if we ever need
to touch them again.
|
|
|
|
comment line where output as too long, and update typedefs for /lib
directory. Also fix case where identifiers were used as variable names
in the backend, but as typedefs in ecpg (favor the backend for
indenting).
Backpatch to 8.1.X.
|
|
|
|
|
|
optional arguments as text input functions, ie, typioparam OID and
atttypmod. Make all the datatypes that use typmod enforce it the same
way in typreceive as they do in typinput. This fixes a problem with
failure to enforce length restrictions during COPY FROM BINARY.
|
|
only one argument. (Per recent discussion, the option to accept multiple
arguments is pretty useless for user-defined types, and would be a likely
source of security holes if it was used.) Simplify call sites of
output/send functions to not bother passing more than one argument.
|
|
former to 100 by default. Clean up some of the less necessary
dependencies on FUNC_MAX_ARGS; however, the biggie (FunctionCallInfoData)
remains.
|
|
change saves a great deal of space in pg_proc and its primary index,
and it eliminates the former requirement that INDEX_MAX_KEYS and
FUNC_MAX_ARGS have the same value. INDEX_MAX_KEYS is still embedded
in the on-disk representation (because it affects index tuple header
size), but FUNC_MAX_ARGS is not. I believe it would now be possible
to increase FUNC_MAX_ARGS at little cost, but haven't experimented yet.
There are still a lot of vestigial references to FUNC_MAX_ARGS, which
I will clean up in a separate pass. However, getting rid of it
altogether would require changing the FunctionCallInfoData struct,
and I'm not sure I want to buy into that.
|
|
Also performed an initial run through of upgrading our Copyright date to
extend to 2005 ... first run here was very simple ... change everything
where: grep 1996-2004 && the word 'Copyright' ... scanned through the
generated list with 'less' first, and after, to make sure that I only
picked up the right entries ...
|
|
mode see a fresh snapshot for each command in the function, rather than
using the latest interactive command's snapshot. Also, suppress fresh
snapshots as well as CommandCounterIncrement inside STABLE and IMMUTABLE
functions, instead using the snapshot taken for the most closely nested
regular query. (This behavior is only sane for read-only functions, so
the patch also enforces that such functions contain only SELECT commands.)
As per my proposal of 6-Sep-2004; I note that I floated essentially the
same proposal on 19-Jun-2002, but that discussion tailed off without any
action. Since 8.0 seems like the right place to be taking possibly
nontrivial backwards compatibility hits, let's get it done now.
|
|
|
|
|
|
of a composite type to get that type's OID as their second parameter,
in place of typelem which is useless. The actual changes are mostly
centralized in getTypeInputInfo and siblings, but I had to fix a few
places that were fetching pg_type.typelem for themselves instead of
using the lsyscache.c routines. Also, I renamed all the related variables
from 'typelem' to 'typioparam' to discourage people from assuming that
they necessarily contain array element types.
|
|
o -Allow dump/load of CSV format
This adds new keywords to COPY and \copy:
CSV - enable CSV mode (comma separated variable)
QUOTE - specify quote character
ESCAPE - specify escape character
FORCE - force quoting of specified column
LITERAL - suppress null comparison for columns
Doc changes included. Regression updates coming from Andrew.
|
|
pointer type when it is not necessary to do so.
For future reference, casting NULL to a pointer type is only necessary
when (a) invoking a function AND either (b) the function has no prototype
OR (c) the function is a varargs function.
|
|
|
|
terms, add some clarifications, fix some untranslatable attempts at dynamic
message building.
|
|
|
|
|
|
|
|
Along the way, fix some logic problems in pgstat_initstats, notably the
bogus assumption that malloc returns zeroed memory.
|
|
fastpath.c had better check for strict functions.
|
|
messages. Binary I/O is now up and working, but only for a small set
of datatypes (integers, text, bytea).
|
|
handle multiple 'formats' for data I/O. Restructure CommandDest and
DestReceiver stuff one more time (it's finally starting to look a bit
clean though). Code now matches latest 3.0 protocol document as far
as message formats go --- but there is no support for binary I/O yet.
|
|
Only lightly tested as yet, since libpq doesn't know anything about 'em.
|
|
Both plannable queries and utility commands are now always executed
within Portals, which have been revamped so that they can handle the
load (they used to be good only for single SELECT queries). Restructure
code to push command-completion-tag selection logic out of postgres.c,
so that it won't have to be duplicated between simple and extended queries.
initdb forced due to addition of a field to Query nodes.
|
|
have length words. COPY OUT reimplemented per new protocol: it doesn't
need \. anymore, thank goodness. COPY BINARY to/from frontend works,
at least as far as the backend is concerned --- libpq's PQgetline API
is not up to snuff, and will have to be replaced with something that is
null-safe. libpq uses message length words for performance improvement
(no cycles wasted rescanning long messages), but not yet for error
recovery.
|
|
have length counts, and COPY IN data is packetized into messages.
|
|
by having to include miscadmin.h into other header files.
|
|
|
|
target function. Also, move SetQuerySnapshot() call to avoid assert
failure when a fastpath call is attempted in an aborted transaction.
|
|
value '-2' is used to indicate a variable-width type whose width is
computed as strlen(datum)+1. Everything that looks at typlen is updated
except for array support, which Joe Conway is working on; at the moment
it wouldn't work to try to create an array of cstring.
|
|
|
|
initdb/regression tests pass.
|
|
spacing. Also adds space for one-line comments.
|
