| Age | Commit message (Collapse) | Author |
|---|
|
The previous check for a "complete query" omitted the new
PROCESS_UTILITY_QUERY_NONATOMIC value. This didn't actually make a
difference in practice, because only CALL and SET from PL/pgSQL run in
this state, but it's more correct to include it anyway.
Discussion: https://www.postgresql.org/message-id/4566041d-2567-74d2-d135-19ff6a20fe51%402ndquadrant.com
|
|
Originally committed as 15bc038f (plus some follow-ups), this was
reverted in 28e07270 due to a problem discovered in parallel
workers. This new version corrects that problem by sending the
list of uncommitted enum values to parallel workers.
Here follows the original commit message describing the change:
To prevent possibly breaking indexes on enum columns, we must keep
uncommitted enum values from getting stored in tables, unless we
can be sure that any such column is new in the current transaction.
Formerly, we enforced this by disallowing ALTER TYPE ... ADD VALUE
from being executed at all in a transaction block, unless the target
enum type had been created in the current transaction. This patch
removes that restriction, and instead insists that an uncommitted enum
value can't be referenced unless it belongs to an enum type created
in the same transaction as the value. Per discussion, this should be
a bit less onerous. It does require each function that could possibly
return a new enum value to SQL operations to check this restriction,
but there aren't so many of those that this seems unmaintainable.
Author: Andrew Dunstan and Tom Lane, with parallel query fix by Thomas Munro
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAEepm%3D0Ei7g6PaNTbcmAh9tCRahQrk%3Dr5ZWLD-jr7hXweYX3yg%40mail.gmail.com
Discussion: https://postgr.es/m/4075.1459088427%40sss.pgh.pa.us
|
|
In the normal course of operation, query trees will be serialized only if
they are stored as views or rules; and plan trees will be serialized only
if they get passed to parallel-query workers. This leaves an awful lot of
opportunity for bugs/oversights to not get detected, as indeed we've just
been reminded of the hard way.
To improve matters, this patch adds a new compile option
WRITE_READ_PARSE_PLAN_TREES, which is modeled on the longstanding option
COPY_PARSE_PLAN_TREES; but instead of passing all parse and plan trees
through copyObject, it passes them through nodeToString + stringToNode.
Enabling this option in a buildfarm animal or two will catch problems
at least for cases that are exercised by the regression tests.
A small problem with this idea is that readfuncs.c historically has
discarded location fields, on the reasonable grounds that parse
locations in a retrieved view are not relevant to the current query.
But doing that in WRITE_READ_PARSE_PLAN_TREES breaks pg_stat_statements,
and it could cause problems for future improvements that might try to
report error locations at runtime. To fix that, provide a variant
behavior in readfuncs.c that makes it restore location fields when
told to.
In passing, const-ify the string arguments of stringToNode and its
subsidiary functions, just because it annoyed me that they weren't
const already.
Discussion: https://postgr.es/m/17114.1537138992@sss.pgh.pa.us
|
|
This just converts a few for loops in postgres.c to declare variables
in the loop initializer, and uses designated initializers in smgr.c's
definition of smgr callbacks.
Author: Andres Freund
Discussion: https://postgr.es/m/97d4b165-192d-3605-749c-f614a0c4e783@2ndquadrant.com
|
|
exit() is not async-signal safe. Even if the libc implementation is, 3rd
party libraries might have installed unsafe atexit() callbacks. After
receiving SIGQUIT, we really just want to exit as quickly as possible, so
we don't really want to run the atexit() callbacks anyway.
The original report by Jimmy Yih was a self-deadlock in startup_die().
However, this patch doesn't address that scenario; the signal handling
while waiting for the startup packet is more complicated. But at least this
alleviates similar problems in the SIGQUIT handlers, like that reported
by Asim R P later in the same thread.
Backpatch to 9.3 (all supported versions).
Discussion: https://www.postgresql.org/message-id/CAOMx_OAuRUHiAuCg2YgicZLzPVv5d9_H4KrL_OFsFP%3DVPekigA%40mail.gmail.com
|
|
This ensures that prepared statements for CALL can return tuples.
|
|
|
|
Creating indexes on foreign tables is already forbidden, but local
partitioned indexes (commit 8b08f7d4820f) forgot to check for them. Add
a preliminary check to prevent wasting time.
Another school of thought says to allow the index to be created if it's
not a unique index; but it's possible to do better in the future (enable
indexing of foreign tables, somehow), so we avoid painting ourselves in
a corner by rejecting all cases, to avoid future grief (a.k.a. backward
incompatible changes).
Reported-by: Arseny Sher
Author: Amit Langote, Álvaro Herrera
Discussion: https://postgr.es/m/87sh71cakz.fsf@ars-thinkpad
|
|
Since the SPI stack has been moved from TopTransactionContext to
TopMemoryContext, setting _SPI_stack to NULL in AtEOXact_SPI() leaks
memory. In fact, we don't need to do that anymore: We just leave the
allocated stack around for the next SPI use.
Also, refactor the SPI cleanup so that it is run both at transaction end
and when returning to the main loop on an exception. The latter is
necessary when a procedure calls a COMMIT or ROLLBACK command that
itself causes an error.
|
|
Recent gcc can warn about switch-case fall throughs that are not
explicitly labeled as intentional. This seems like a good thing,
so clean up the warnings exposed thereby by labeling all such
cases with comments that gcc will recognize.
In files that already had one or more suitable comments, I generally
matched the existing style of those. Otherwise I went with
/* FALLTHROUGH */, which is one of the spellings approved at the
more-restrictive-than-default level -Wimplicit-fallthrough=4.
(At the default level you can also spell it /* FALL ?THRU */,
and it's not picky about case. What you can't do is include
additional text in the same comment, so some existing comments
containing versions of this aren't good enough.)
Testing with gcc 8.0.1 (Fedora 28's current version), I found that
I also had to put explicit "break"s after elog(ERROR) or ereport(ERROR);
apparently, for this purpose gcc doesn't recognize that those don't
return. That seems like possibly a gcc bug, but it's fine because
in most places we did that anyway; so this amounts to a visit from the
style police.
Discussion: https://postgr.es/m/15083.1525207729@sss.pgh.pa.us
|
|
Discussion: https://postgr.es/m/15719.1523984266@sss.pgh.pa.us
|
|
There's been a massive addition of partitioning code in PostgreSQL 11,
with little oversight on its placement, resulting in a
catalog/partition.c with poorly defined boundaries and responsibilities.
This commit tries to set a couple of distinct modules to separate things
a little bit. There are no code changes here, only code movement.
There are three new files:
src/backend/utils/cache/partcache.c
src/include/partitioning/partdefs.h
src/include/utils/partcache.h
The previous arrangement of #including catalog/partition.h almost
everywhere is no more.
Authors: Amit Langote and Álvaro Herrera
Discussion: https://postgr.es/m/98e8d509-790a-128c-be7f-e48a5b2d8d97@lab.ntt.co.jp
https://postgr.es/m/11aa0c50-316b-18bb-722d-c23814f39059@lab.ntt.co.jp
https://postgr.es/m/143ed9a4-6038-76d4-9a55-502035815e68@lab.ntt.co.jp
https://postgr.es/m/20180413193503.nynq7bnmgh6vs5vm@alvherre.pgsql
|
|
This reverts commits d204ef63776b8a00ca220adec23979091564e465,
83454e3c2b28141c0db01c7d2027e01040df5249 and a few more commits thereafter
(complete list at the end) related to MERGE feature.
While the feature was fully functional, with sufficient test coverage and
necessary documentation, it was felt that some parts of the executor and
parse-analyzer can use a different design and it wasn't possible to do that in
the available time. So it was decided to revert the patch for PG11 and retry
again in the future.
Thanks again to all reviewers and bug reporters.
List of commits reverted, in reverse chronological order:
f1464c5380 Improve parse representation for MERGE
ddb4158579 MERGE syntax diagram correction
530e69e59b Allow cpluspluscheck to pass by renaming variable
01b88b4df5 MERGE minor errata
3af7b2b0d4 MERGE fix variable warning in non-assert builds
a5d86181ec MERGE INSERT allows only one VALUES clause
4b2d44031f MERGE post-commit review
4923550c20 Tab completion for MERGE
aa3faa3c7a WITH support in MERGE
83454e3c2b New files for MERGE
d204ef6377 MERGE SQL Command following SQL:2016
Author: Pavan Deolasee
Reviewed-by: Michael Paquier
|
|
Traditionally, include/catalog/pg_foo.h contains extern declarations
for functions in backend/catalog/pg_foo.c, in addition to its function
as the authoritative definition of the pg_foo catalog's rowtype.
In some cases, we'd been forced to split out those extern declarations
into separate pg_foo_fn.h headers so that the catalog definitions
could be #include'd by frontend code. That problem is gone as of
commit 9c0a0de4c, so let's undo the splits to make things less
confusing.
Discussion: https://postgr.es/m/23690.1523031777@sss.pgh.pa.us
|
|
Allow the cluster to be optionally init'd with read access for the
group.
This means a relatively non-privileged user can perform a backup of the
cluster without requiring write privileges, which enhances security.
The mode of PGDATA is used to determine whether group permissions are
enabled for directory and file creates. This method was chosen as it's
simple and works well for the various utilities that write into PGDATA.
Changing the mode of PGDATA manually will not automatically change the
mode of all the files contained therein. If the user would like to
enable group access on an existing cluster then changing the mode of all
the existing files will be required. Note that pg_upgrade will
automatically change the mode of all migrated files if the new cluster
is init'd with the -g option.
Tests are included for the backend and all the utilities which operate
on the PG data directory to ensure that the correct mode is set based on
the data directory permissions.
Author: David Steele <david@pgmasters.net>
Reviewed-By: Michael Paquier, with discussion amongst many others.
Discussion: https://postgr.es/m/ad346fe6-b23e-59f1-ecb7-0e08390ad629%40pgmasters.net
|
|
THis adds a "flags" field to the BackgroundWorkerInitializeConnection()
and BackgroundWorkerInitializeConnectionByOid(). For now only one flag,
BGWORKER_BYPASS_ALLOWCONN, is defined, which allows the worker to ignore
datallowconn.
|
|
MERGE performs actions that modify rows in the target table
using a source table or query. MERGE provides a single SQL
statement that can conditionally INSERT/UPDATE/DELETE rows
a task that would other require multiple PL statements.
e.g.
MERGE INTO target AS t
USING source AS s
ON t.tid = s.sid
WHEN MATCHED AND t.balance > s.delta THEN
UPDATE SET balance = t.balance - s.delta
WHEN MATCHED THEN
DELETE
WHEN NOT MATCHED AND s.delta > 0 THEN
INSERT VALUES (s.sid, s.delta)
WHEN NOT MATCHED THEN
DO NOTHING;
MERGE works with regular and partitioned tables, including
column and row security enforcement, as well as support for
row, statement and transition triggers.
MERGE is optimized for OLTP and is parameterizable, though
also useful for large scale ETL/ELT. MERGE is not intended
to be used in preference to existing single SQL commands
for INSERT, UPDATE or DELETE since there is some overhead.
MERGE can be used statically from PL/pgSQL.
MERGE does not yet support inheritance, write rules,
RETURNING clauses, updatable views or foreign tables.
MERGE follows SQL Standard per the most recent SQL:2016.
Includes full tests and documentation, including full
isolation tests to demonstrate the concurrent behavior.
This version written from scratch in 2017 by Simon Riggs,
using docs and tests originally written in 2009. Later work
from Pavan Deolasee has been both complex and deep, leaving
the lead author credit now in his hands.
Extensive discussion of concurrency from Peter Geoghegan,
with thanks for the time and effort contributed.
Various issues reported via sqlsmith by Andreas Seltenreich
Authors: Pavan Deolasee, Simon Riggs
Reviewer: Peter Geoghegan, Amit Langote, Tomas Vondra, Simon Riggs
Discussion:
https://postgr.es/m/CANP8+jKitBSrB7oTgT9CY2i1ObfOt36z0XMraQc+Xrz8QB0nXA@mail.gmail.com
https://postgr.es/m/CAH2-WzkJdBuxj9PO=2QaO9-3h3xGbQPZ34kJH=HukRekwM-GZg@mail.gmail.com
|
|
This reverts commit 354f13855e6381d288dfaa52bcd4f2cb0fd4a5eb.
|
|
|
|
A followup patch will add a SKIP_LOCKED option. To avoid introducing
evermore arguments, breaking existing callers each time, introduce a
flags argument. This'll no doubt break a few external users...
Also change the MISSING_OK behaviour so a DEBUG1 debug message is
emitted when a relation is not found.
Author: Nathan Bossart
Reviewed-By: Michael Paquier and Andres Freund
Discussion: https://postgr.es/m/20180306005349.b65whmvj7z6hbe2y@alap3.anarazel.de
|
|
Previously, committing or aborting inside a cursor loop was prohibited
because that would close and remove the cursor. To allow that,
automatically convert such cursors to holdable cursors so they survive
commits or rollbacks. Portals now have a new state "auto-held", which
means they have been converted automatically from pinned. An auto-held
portal is kept on transaction commit or rollback, but is still removed
when returning to the main loop on error.
This supports all languages that have cursor loop constructs: PL/pgSQL,
PL/Python, PL/Perl.
Reviewed-by: Ildus Kurbangaliev <i.kurbangaliev@postgrespro.ru>
|
|
So far, a nested CALL or DO in PL/pgSQL would not establish a context
where transaction control statements were allowed. This fixes that by
handling CALL and DO specially in PL/pgSQL, passing the atomic/nonatomic
execution context through and doing the required management around
transaction boundaries.
Reviewed-by: Tomas Vondra <tomas.vondra@2ndquadrant.com>
|
|
Put the "atomic" argument of ExecuteDoStmt() and ExecuteCallStmt() into
a variable instead of repeating the formula.
|
|
Previously, FOR EACH ROW triggers were not allowed in partitioned
tables. Now we allow AFTER triggers on them, and on trigger creation we
cascade to create an identical trigger in each partition. We also clone
the triggers to each partition that is created or attached later.
This means that deferred unique keys are allowed on partitioned tables,
too.
Author: Álvaro Herrera
Reviewed-by: Peter Eisentraut, Simon Riggs, Amit Langote, Robert Haas,
Thomas Munro
Discussion: https://postgr.es/m/20171229225319.ajltgss2ojkfd3kp@alvherre.pgsql
|
|
This commit introduces:
1) JIT provider abstraction, which allows JIT functionality to be
implemented in separate shared libraries. That's desirable because
it allows to install JIT support as a separate package, and because
it allows experimentation with different forms of JITing.
2) JITContexts which can be, using functions introduced in follow up
commits, used to emit JITed functions, and have them be cleaned up
on error.
3) The outline of a LLVM JIT provider, which will be fleshed out in
subsequent commits.
Documentation for GUCs added, and for JIT in general, will be added in
later commits.
Author: Andres Freund, with architectural input from Jeff Davis
Discussion: https://postgr.es/m/20170901064131.tazjxwus3k2w3ybh@alap3.anarazel.de
|
|
Instead of embedding the savepoint name in a list and then requiring
complex code to unpack it, just add another struct field to store it
directly.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
|
|
We call this thing a "transaction block" everywhere except in a few
functions, where it is mysteriously called a "transaction chain". In
the SQL standard, a transaction chain is something different. So rename
these functions to match the common terminology.
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
|
|
In a top-level CALL, the values of INOUT arguments will be returned as a
result row. In PL/pgSQL, the values are assigned back to the input
arguments. In other languages, the same convention as for return a
record from a function is used. That does not require any code changes
in the PL implementations.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
|
|
To support parameters in CALL, move the parse analysis of the procedure
and arguments into the global transformation phase, so that the parser
hooks can be applied. And then at execution time pass the parameters
from ProcessUtility on to ExecuteCallStmt.
|
|
If we restrict unique constraints on partitioned tables so that they
must always include the partition key, then our standard approach to
unique indexes already works --- each unique key is forced to exist
within a single partition, so enforcing the unique restriction in each
index individually is enough to have it enforced globally. Therefore we
can implement unique indexes on partitions by simply removing a few
restrictions (and adding others.)
Discussion: https://postgr.es/m/20171222212921.hi6hg6pem2w2t36z@alvherre.pgsql
Discussion: https://postgr.es/m/20171229230607.3iib6b62fn3uaf47@alvherre.pgsql
Reviewed-by: Simon Riggs, Jesper Pedersen, Peter Eisentraut, Jaime
Casanova, Amit Langote
|
|
Otherwise, we can end up with the flag set when the timeout is
actually disabled, leading to misbehavior. Commit
f8e5f156b30efee5d0038b03e38735773abcb7ed introduced this bug.
Reported by Peter Eisentraut. Analysis and fix by Thomas Munro,
tweaked by me.
Discussion: http://postgr.es/m/6a909374-2602-7136-8c70-397330a418f3@2ndquadrant.com
|
|
In each of the supplied procedural languages (PL/pgSQL, PL/Perl,
PL/Python, PL/Tcl), add language-specific commit and rollback
functions/commands to control transactions in procedures in that
language. Add similar underlying functions to SPI. Some additional
cleanup so that transaction commit or abort doesn't blow away data
structures still used by the procedure call. Add execution context
tracking to CALL and DO statements so that transaction control commands
can only be issued in top-level procedure and block calls, not function
calls or other procedure or block calls.
- SPI
Add a new function SPI_connect_ext() that is like SPI_connect() but
allows passing option flags. The only option flag right now is
SPI_OPT_NONATOMIC. A nonatomic SPI connection can execute transaction
control commands, otherwise it's not allowed. This is meant to be
passed down from CALL and DO statements which themselves know in which
context they are called. A nonatomic SPI connection uses different
memory management. A normal SPI connection allocates its memory in
TopTransactionContext. For nonatomic connections we use PortalContext
instead. As the comment in SPI_connect_ext() (previously SPI_connect())
indicates, one could potentially use PortalContext in all cases, but it
seems safest to leave the existing uses alone, because this stuff is
complicated enough already.
SPI also gets new functions SPI_start_transaction(), SPI_commit(), and
SPI_rollback(), which can be used by PLs to implement their transaction
control logic.
- portalmem.c
Some adjustments were made in the code that cleans up portals at
transaction abort. The portal code could already handle a command
*committing* a transaction and continuing (e.g., VACUUM), but it was not
quite prepared for a command *aborting* a transaction and continuing.
In AtAbort_Portals(), remove the code that marks an active portal as
failed. As the comment there already predicted, this doesn't work if
the running command wants to keep running after transaction abort. And
it's actually not necessary, because pquery.c is careful to run all
portal code in a PG_TRY block and explicitly runs MarkPortalFailed() if
there is an exception. So the code in AtAbort_Portals() is never used
anyway.
In AtAbort_Portals() and AtCleanup_Portals(), we need to be careful not
to clean up active portals too much. This mirrors similar code in
PreCommit_Portals().
- PL/Perl
Gets new functions spi_commit() and spi_rollback()
- PL/pgSQL
Gets new commands COMMIT and ROLLBACK.
Update the PL/SQL porting example in the documentation to reflect that
transactions are now possible in procedures.
- PL/Python
Gets new functions plpy.commit and plpy.rollback.
- PL/Tcl
Gets new commands commit and rollback.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
|
|
AclObjectKind was basically just another enumeration for object types,
and we already have a preferred one for that. It's only used in
aclcheck_error. By using ObjectType instead, we can also give some more
precise error messages, for example "index" instead of "relation".
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
|
There used to be a lot of different *Type and *Kind symbol groups to
address objects within different commands, most of which have been
replaced by ObjectType, starting with
b256f2426433c56b4bea3a8102757749885b81ba. But this conversion was never
done for the ACL commands until now.
This change ends up being just a plain replacement of the types and
symbols, without any code restructuring needed, except deleting some now
redundant code.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
Reviewed-by: Stephen Frost <sfrost@snowman.net>
|
|
When CREATE INDEX is run on a partitioned table, create catalog entries
for an index on the partitioned table (which is just a placeholder since
the table proper has no data of its own), and recurse to create actual
indexes on the existing partitions; create them in future partitions
also.
As a convenience gadget, if the new index definition matches some
existing index in partitions, these are picked up and used instead of
creating new ones. Whichever way these indexes come about, they become
attached to the index on the parent table and are dropped alongside it,
and cannot be dropped on isolation unless they are detached first.
To support pg_dump'ing these indexes, add commands
CREATE INDEX ON ONLY <table>
(which creates the index on the parent partitioned table, without
recursing) and
ALTER INDEX ATTACH PARTITION
(which is used after the indexes have been created individually on each
partition, to attach them to the parent index). These reconstruct prior
database state exactly.
Reviewed-by: (in alphabetical order) Peter Eisentraut, Robert Haas, Amit
Langote, Jesper Pedersen, Simon Riggs, David Rowley
Discussion: https://postgr.es/m/20171113170646.gzweigyrgg6pwsg4@alvherre.pgsql
|
|
After having gotten rid of PortalGetHeapMemory(), there seems little
reason to keep one Portal access macro around that offers no actual
abstraction and isn't consistently used anyway.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
|
|
Rename PortalMemory to TopPortalContext, to avoid confusion with
PortalContext and align naming with similar top-level memory contexts.
Rename PortalData's "heap" field to portalContext. The "heap" naming
seems quite antiquated and confusing. Also get rid of the
PortalGetHeapMemory() macro and access the field directly, which we do
for other portal fields, so this abstraction doesn't buy anything.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
|
|
Backpatch-through: certain files through 9.3
|
|
This patch does three interrelated things:
* Create a new expression execution step type EEOP_PARAM_CALLBACK
and add the infrastructure needed for add-on modules to generate that.
As discussed, the best control mechanism for that seems to be to add
another hook function to ParamListInfo, which will be called by
ExecInitExpr if it's supplied and a PARAM_EXTERN Param is found.
For stand-alone expressions, we add a new entry point to allow the
ParamListInfo to be specified directly, since it can't be retrieved
from the parent plan node's EState.
* Redesign the API for the ParamListInfo paramFetch hook so that the
ParamExternData array can be entirely virtual. This also lets us get rid
of ParamListInfo.paramMask, instead leaving it to the paramFetch hook to
decide which param IDs should be accessible or not. plpgsql_param_fetch
was already doing the identical masking check, so having callers do it too
seemed redundant. While I was at it, I added a "speculative" flag to
paramFetch that the planner can specify as TRUE to avoid unwanted failures.
This solves an ancient problem for plpgsql that it couldn't provide values
of non-DTYPE_VAR variables to the planner for fear of triggering premature
"record not assigned yet" or "field not found" errors during planning.
* Rework plpgsql to get rid of the need for "unshared" parameter lists,
by dint of turning the single ParamListInfo per estate into a nearly
read-only data structure that doesn't instantiate any per-variable data.
Instead, the paramFetch hook controls access to per-variable data and can
make the right decisions on the fly, replacing the cases that we used to
need multiple ParamListInfos for. This might perhaps have been a
performance loss on its own, but by using a paramCompile hook we can
bypass plpgsql_param_fetch entirely during normal query execution.
(It's now only called when, eg, we copy the ParamListInfo into a cursor
portal. copyParamList() or SerializeParamList() effectively instantiate
the virtual parameter array as a simple physical array without a
paramFetch hook, which is what we want in those cases.) This allows
reverting most of commit 6c82d8d1f, though I kept the cosmetic
code-consolidation aspects of that (eg the assign_simple_var function).
Performance testing shows this to be at worst a break-even change,
and it can provide wins ranging up to 20% in test cases involving
accesses to fields of "record" variables. The fact that values of
such variables can now be exposed to the planner might produce wins
in some situations, too, but I've not pursued that angle.
In passing, remove the "parent" pointer from the arguments to
ExecInitExprRec and related functions, instead storing that pointer in a
transient field in ExprState. The ParamListInfo pointer for a stand-alone
expression is handled the same way; we'd otherwise have had to add
yet another recursively-passed-down argument in expression compilation.
Discussion: https://postgr.es/m/32589.1513706441@sss.pgh.pa.us
|
|
This adds a new object type "procedure" that is similar to a function
but does not have a return type and is invoked by the new CALL statement
instead of SELECT or similar. This implementation is aligned with the
SQL standard and compatible with or similar to other SQL implementations.
This commit adds new commands CALL, CREATE/ALTER/DROP PROCEDURE, as well
as ALTER/DROP ROUTINE that can refer to either a function or a
procedure (or an aggregate function, as an extension to SQL). There is
also support for procedures in various utility commands such as COMMENT
and GRANT, as well as support in pg_dump and psql. Support for defining
procedures is available in all the languages supplied by the core
distribution.
While this commit is mainly syntax sugar around existing functionality,
future features will rely on having procedures as a separate object
type.
Reviewed-by: Andrew Dunstan <andrew.dunstan@2ndquadrant.com>
|
|
Discussion: http://postgr.es/m/CA+TgmoaA9=1RWKtBWpDaj+sF3Stgc8sHgf5z=KGtbjwPLQVDMA@mail.gmail.com
|
|
It's become apparent during testing that there are problems with at
least the testing regime. I don't think we should have it without a
working test regime, and the difficulties might indicate implementation
problems anyway, so I'm backing out the whole thing until that's sorted
out.
This reverts commits 7459484 9989f92 cd8ce3a
|
|
These hooks can be used in loadable modules. A simple test module is
included.
Discussion: https://postgr.es/m/20170720204733.40f2b7eb.nagata@sraoss.co.jp
Fabrízio de Royes Mello and Yugo Nagata
Reviewed by Michael Paquier and Aleksandr Parfenov
|
|
The lower case spellings are C and C++ standard and are used in most
parts of the PostgreSQL sources. The upper case spellings are only used
in some files/modules. So standardize on the standard spellings.
The APIs for ICU, Perl, and Windows define their own TRUE and FALSE, so
those are left as is when using those APIs.
In code comments, we use the lower-case spelling for the C concepts and
keep the upper-case spelling for the SQL concepts.
Reviewed-by: Michael Paquier <michael.paquier@gmail.com>
|
|
pq_sendint() remains, so extension code doesn't unnecessarily break.
Author: Andres Freund
Discussion: https://postgr.es/m/20170914063418.sckdzgjfrsbekae4@alap3.anarazel.de
|
|
There's three categories of changes leading to better performance:
- Splitting the per-attribute part of SendRowDescriptionMessage into a
v2 and a v3 version allows avoiding branches for every attribute.
- Preallocating the size of the buffer to be big enough for all
attributes and then using pq_write* avoids unnecessary buffer
size checks & resizing.
- Reusing a persistently allocated StringInfo for all
SendRowDescriptionMessage() invocations avoids repeated allocations
& reallocations.
Author: Andres Freund
Discussion: https://postgr.es/m/20170914063418.sckdzgjfrsbekae4@alap3.anarazel.de
|
|
The previous coding in ProcessInterrupts() could lead to
idle_in_transaction_session_timeout being ignored, when
statement_timeout occurred earlier.
The problem was that ProcessInterrupts() would return before
processing the transaction timeout if QueryCancelPending was set while
QueryCancelHoldoffCount != 0 - which is the case when reading new
commands from the client. Ergo when the idle transaction timeout would
hit.
Fix that by removing the early return. Alternatively the transaction
timeout code could have been moved up, but that early return seems
like an issue that could hit other cases too.
Author: Lukas Fittl
Bug: #14821
Discussion:
https://www.postgresql.org/message-id/20170921010956.17345.61461%40wrigleys.postgresql.org
https://www.postgresql.org/message-id/CAP53PkxQnv3OWJpyNPGJYT62uY=n1=2CF_Lpc6gVOFnc0-gazw@mail.gmail.com
Backpatch: 9.6-, where idle_in_transaction_session_timeout was introduced.
|
|
All postgres internal usages are replaced, it's just libpq example
usages that haven't been converted. External users of libpq can't
generally rely on including postgres internal headers.
Note that this includes replacing open-coded byte swapping of 64bit
integers (using two 32 bit swaps) with a single 64bit swap.
Where it looked applicable, I have removed netinet/in.h and
arpa/inet.h usage, which previously provided the relevant
functionality. It's perfectly possible that I missed other reasons for
including those, the buildfarm will tell.
Author: Andres Freund
Discussion: https://postgr.es/m/20170927172019.gheidqy6xvlxb325@alap3.anarazel.de
|
|
This reverts commit 15bc038f9, along with the followon commits 1635e80d3
and 984c92074 that tried to clean up the problems exposed by bug #14825.
The result was incomplete because it failed to address parallel-query
requirements. With 10.0 release so close upon us, now does not seem like
the time to be adding more code to fix that. I hope we can un-revert this
code and add the missing parallel query support during the v11 cycle.
Back-patch to v10.
Discussion: https://postgr.es/m/20170922185904.1448.16585@wrigleys.postgresql.org
|
|
Previously statement_timeout, in the extended protocol, affected all
messages till a Sync message. For clients that pipeline/batch query
execution that's problematic.
Instead disable timeout after each Execute message, and enable, if
necessary, the timer in start_xact_command(). As that's done only for
Execute and not Parse / Bind, pipelining the latter two could still
cause undesirable timeouts. But a survey of protocol implementations
shows that all drivers issue Sync messages when preparing, and adding
timeout rearming to both is fairly expensive for the common parse /
bind / execute sequence.
Author: Tatsuo Ishii, editorialized by Andres Freund
Reviewed-By: Takayuki Tsunakawa, Andres Freund
Discussion: https://postgr.es/m/20170222.115044.1665674502985097185.t-ishii@sraoss.co.jp
|
