| Age | Commit message (Collapse) | Author |
|---|
|
Thanks to Michael Fuhr for identifying the problem.
|
|
was previously allowed in odd places with odd results now causes an ERROR.
Also changed behavior with respect to whitespace -- trailing whitespace is
now ignored as well as leading whitespace (which has always been ignored).
Documentation updated to reflect change in whitespace handling. Also some
refactoring to what I believe is a more sensible order of several paragraphs.
|
|
This avoids changing the displayed appearance of ACL columns now that
array_out decorates its output with bounds information when the lower
bound isn't one. Per gripe from Gaetano Mendola. Note that I did not
force initdb for this, although any database initdb'd in the last
couple of days is going to have some problems.
|
|
subarrays of a given dimension have the same number of elements/subarrays.
Also repair a longstanding undocumented (as far as I can see) ability to
explicitly set array bounds in the array literal syntax. It now can
deal properly with negative array indicies. Modify array_out so that
arrays with non-standard lower bounds (i.e. not 1) are output with
the expicit dimension syntax. This fixes a longstanding issue whereby
arrays with non-default lower bounds had them changed to default
after a dump/reload cycle.
Modify regression tests and docs to suit, and add some minimal
documentation regarding the explicit dimension syntax.
|
|
and documentation to reference 8.0 instead of 7.5.
|
|
datatype. Per example from Gaetano Mendola, 2004-07-25.
|
|
and history files as per recent discussion. While at it, remove
pg_terminate_backend, since we have decided we do not have time during
this release cycle to address the reliability concerns it creates.
Split the 'Miscellaneous Functions' documentation section into
'System Information Functions' and 'System Administration Functions',
which hopefully will draw the eyes of those looking for such things.
|
|
error code for string-too-long errors. It should be STRING_DATA_RIGHT_TRUNCATION
not STRING_DATA_LENGTH_MISMATCH. The latter probably should only be
applied to cases where a string must be exactly so many bits --- there are
no cases at all where it applies to character strings, only bit strings.
|
|
constraints. Christopher Kings-Lynne.
|
|
to the old owner with the new owner. This is not necessarily right, but
it's sure a lot more likely to be what the user wants than doing nothing.
Christopher Kings-Lynne, some rework by Tom Lane.
|
|
Christopher Kings-Lynne
|
|
than 'datetime BC zone', because the former is accepted by the timestamptz
input converter while the latter may not be depending on spacing. This
is not a loss of compatibility w.r.t. 7.4 and before, because until very
recently there was never a case where we'd output both zone and 'BC'.
|
|
et al.
|
|
better SQL compliance in this area, per recent discussion. Mark related
operators as commutators where possible. (The system doesn't actually care
about commutator marking for operators not returning boolean, at the moment,
but this seems forward-thinking and besides it made it easier to verify
that we hadn't missed any.)
Also, remove interval-minus-time and interval-minus-timetz operators.
I'm not sure how these got in, but they are nonstandard and had very
obviously broken behavior. (minus is not commutative in anyone's book.)
I doubt anyone had ever used 'em, because we'd surely have gotten a bug
report about it if so.
|
|
From an idea of Bruce, the attached patch implements the function
pg_tablespace_databases(oid) RETURNS SETOF oid
which delivers as set of database oids having objects in the selected
tablespace, enabling an admin to examine only the databases affecting
the tablespace for objects instead of scanning all of them.
initdb forced
|
|
This eliminates the assumption that a serial column's sequence will
have the same name on reload that it was given in the original database.
Christopher Kings-Lynne
|
|
There are various things left to do: contrib dbsize and oid2name modules
need work, and so does the documentation. Also someone should think about
COMMENT ON TABLESPACE and maybe RENAME TABLESPACE. Also initlocation is
dead, it just doesn't know it yet.
Gavin Sherry and Tom Lane.
|
|
eliminating the former hard-wired convention about their names. Allow
pg_cast entries to represent both type coercion and length coercion in
a single step --- this is represented by a function that takes an
extra typmod argument, just like a length coercion function. This
nicely merges the type and length coercion mechanisms into something
at least a little cleaner than we had before. Make use of the single-
coercion-step behavior to fix integer-to-bit coercion so that coercing
to bit(n) yields the rightmost n bits of the integer instead of the
leftmost n bits. This should fix recurrent complaints about the odd
behavior of this coercion. Clean up the documentation of the bit string
functions, and try to put it where people might actually find it.
Also, get rid of the unreliable heuristics in ruleutils.c about whether
to display nested coercion steps; instead require parse_coerce.c to
label them properly in the first place.
|
|
cidr type bit, the same as network_eq does. This is needed for hash joins
and hash aggregation to work correctly on these types. Per bug report
from Michael Fuhr, 2004-04-13.
Also, improve hash function for int8 as suggested by Greg Stark.
|
|
log_hostname is enabled, clean up documentation.
|
|
until Bind is received, so that actual parameter values are visible to the
planner. Make use of the parameter values for estimation purposes (but
don't fold them into the actual plan). This buys back most of the
potential loss of plan quality that ensues from using out-of-line
parameters instead of putting literal values right into the query text.
This patch creates a notion of constant-folding expressions 'for
estimation purposes only', in which case we can be more aggressive than
the normal eval_const_expressions() logic can be. Right now the only
difference in behavior is inserting bound values for Params, but it will
be interesting to look at other possibilities. One that we've seen
come up repeatedly is reducing now() and related functions to current
values, so that queries like ... WHERE timestampcol > now() - '1 day'
have some chance of being planned effectively.
Oliver Jowett, with some kibitzing from Tom Lane.
|
|
As a side effect, cause subscripts in INSERT targetlists to do something
more or less sensible; previously we evaluated such subscripts and then
effectively ignored them. Another side effect is that UPDATE-ing an
element or slice of an array value that is NULL now produces a non-null
result, namely an array containing just the assigned-to positions.
|
|
array.
|
|
code if we are running in a single-byte encoding. No point in the
extra overhead in that case.
|
|
|
|
no binary yet.
|
|
of a composite type to get that type's OID as their second parameter,
in place of typelem which is useless. The actual changes are mostly
centralized in getTypeInputInfo and siblings, but I had to fix a few
places that were fetching pg_type.typelem for themselves instead of
using the lsyscache.c routines. Also, I renamed all the related variables
from 'typelem' to 'typioparam' to discourage people from assuming that
they necessarily contain array element types.
|
|
proposal. Eliminate several dozen now-unnecessary hacks to avoid palloc(0).
(It's likely there are more that I didn't find.)
|
|
Stephen Frost. Also tighten date range check in timestamp2tm.
|
|
place of time_t, as per prior discussion. The behavior does not change
on machines without a 64-bit-int type, but on machines with one, which
is most, we are rid of the bizarre boundary behavior at the edges of
the 32-bit-time_t range (1901 and 2038). The system will now treat
times over the full supported timestamp range as being in your local
time zone. It may seem a little bizarre to consider that times in
4000 BC are PST or EST, but this is surely at least as reasonable as
propagating Gregorian calendar rules back that far.
I did not modify the format of the zic timezone database files, which
means that for the moment the system will not know about daylight-savings
periods outside the range 1901-2038. Given the way the files are set up,
it's not a simple decision like 'widen to 64 bits'; we have to actually
think about the range of years that need to be supported. We should
probably inquire what the plans of the upstream zic people are before
making any decisions of our own.
|
|
(cancel and terminate) signals to other backends. They permit only INT
and TERM, and permits sending only to postgresql backends.
Magnus Hagander
|
|
of bug report #1150. Also, arrange that the object owner's irrevocable
grant-option permissions are handled implicitly by the system rather than
being listed in the ACL as self-granted rights (which was wrong anyway).
I did not take the further step of showing these permissions in an
explicit 'granted by _SYSTEM' ACL entry, as that seemed more likely to
bollix up existing clients than to do anything really useful. It's still
a possible future direction, though.
|
|
is actually needed. Per Oliver Elphick.
|
|
issue in timestamp conversion that we hacked around for so long by
ignoring the seconds field from localtime(). It's simple: you have
to watch out for platform-specific roundoff error when reducing a
possibly-fractional timestamp to integral time_t form. In particular
we should subtract off the already-determined fractional fsec field.
This should be enough to get an exact answer with int64 timestamps;
with float timestamps, throw in a rint() call just to be sure.
|
|
list compatibility API by default. While doing this, I decided to keep
the llast() macro around and introduce llast_int() and llast_oid() variants.
|
|
Per report from Magnus.
|
|
|
|
the four functions.
> Also, please justify the temp-related changes. I was not aware that we
> had any breakage there.
patch-tmp-schema.txt contains the following bits:
*) Changes pg_namespace_aclmask() so that the superuser is always able
to create objects in the temp namespace.
*) Changes pg_namespace_aclmask() so that if this is a temp namespace,
objects are only allowed to be created in the temp namespace if the
user has TEMP privs on the database. This encompasses all object
creation, not just TEMP tables.
*) InitTempTableNamespace() checks to see if the current user, not the
session user, has access to create a temp namespace.
The first two changes are necessary to support the third change. Now
it's possible to revoke all temp table privs from non-super users and
limiting all creation of temp tables/schemas via a function that's
executed with elevated privs (security definer). Before this change,
it was not possible to have a setuid function to create a temp
table/schema if the session user had no TEMP privs.
patch-area-path.txt contains:
*) Can now determine the area of a closed path.
patch-dfmgr.txt contains:
*) Small tweak to add the library path that's being expanded.
I was using $lib/foo.so and couldn't easily figure out what the error
message, "invalid macro name in dynamic library path" meant without
looking through the source code. With the path in there, at least I
know where to start looking in my config file.
Sean Chittenden
|
|
|
|
(1) boolean-and and boolean-or aggregates named bool_and and bool_or.
they (SHOULD;-) correspond to standard sql every and some/any aggregates.
they do not have the right name as there is a problem with
the standard and the parser for some/any. Tom also think that
the standard name is misleading because NULL are ignored.
Also add 'every' aggregate.
(2) bitwise integer aggregates named bit_and and bit_or for
int2, int4, int8 and bit types. They are not standard, but I find
them useful. I needed them once.
The patches adds:
- 2 new very short strict functions for boolean aggregates in
src/backed/utils/adt/bool.c,
src/include/utils/builtins.h and src/include/catalog/pg_proc.h
- the new aggregates declared in src/include/catalog/pg_proc.h and
src/include/catalog/pg_aggregate.h
- some documentation and validation about these new aggregates.
Fabien COELHO
|
|
In the past, we used a 'Lispy' linked list implementation: a "list" was
merely a pointer to the head node of the list. The problem with that
design is that it makes lappend() and length() linear time. This patch
fixes that problem (and others) by maintaining a count of the list
length and a pointer to the tail node along with each head node pointer.
A "list" is now a pointer to a structure containing some meta-data
about the list; the head and tail pointers in that structure refer
to ListCell structures that maintain the actual linked list of nodes.
The function names of the list API have also been changed to, I hope,
be more logically consistent. By default, the old function names are
still available; they will be disabled-by-default once the rest of
the tree has been updated to use the new API names.
|
|
functions. This allows these functions to work correctly with Unicode and
other multibyte encodings. Per prior discussion.
Also, revert my earlier change to move installation path mashing from
Makefile.global to configure. Turns out not to work well because configure
script is working with unexpanded variables, and so fails to match in
cases where it should match.
|
|
|
|
and should do now that we control our own destiny for timezone handling,
but this commit gets the bulk of the picayune diffs in place.
Magnus Hagander and Tom Lane.
|
|
right error code previously, and this patch applies an analogous change
to numeric_sqrt().
|
|
error codes for certain error conditions, as specified by SQL2003.
|
|
a variant of the function for the 'numeric' datatype; it would be possible
to add additional variants for other datatypes, but I haven't done so yet.
This commit includes regression tests and minimal documentation; if we
want developers to actually use this function in applications, we'll
probably need to document what it does more fully.
|
|
by Ken Ashcraft's report. I think there is no actual bug here since if
the int32 value does wrap a little bit, palloc will still reject it.
Still it's better that the code be obviously correct.
|
|
rather than allowing them only in a few special cases as before. In
particular you can now pass a ROW() construct to a function that accepts
a rowtype parameter. Internal generation of RowExprs fixes a number of
corner cases that used to not work very well, such as referencing the
whole-row result of a JOIN or subquery. This represents a further step in
the work I started a month or so back to make rowtype values into
first-class citizens.
|
|
by the SQL spec and by our parser. Thanks to Jonathan Scott for finding
this longstanding error.
|
