| Age | Commit message (Collapse) | Author |
|---|
|
- 4c787a24e7e220a60022e47c1776f22f72902899
- 78bd364ee39ca70a8f9cb8719282389866a08e14
- 7a6880fadc177873d5663961ec3a02d67e34dcbe
- 8898082a5d3e94eef073f0e08124137e096e78ef
Suggested-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA+TgmoZ=J=PVNZUNKaxULu+KUVSt3Y-aJ1DZ9Y3Co6mu0z62jA@mail.gmail.com
Discussion: https://postgr.es/m/60e8c6d0a6c08e67f15dbbe9e53df0119c710065.camel@j-davis.com
|
|
Avoid dependence on setlocale(). No behavior change.
Discussion: https://postgr.es/m/9875f7f9-50f1-4b5d-86fc-ee8b03e8c162@eisentraut.org
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
|
|
|
|
uint64 was perhaps chosen in cff440d36 as the type was uint32 prior to
that widening work.
Having this as uint64 doesn't make much sense and just adds the overhead of
having to remember that we always output this in its signed form. Let's
remove that overhead.
The signed form output is seemingly required since we have no way to
represent the full range of uint64 in an SQL type. We use BIGINT in places
like pg_stat_statements, which maps directly to int64.
The release notes "Source Code" section may want to mention this
adjustment as some extensions may wish to adjust their code.
Author: David Rowley <dgrowleyml@gmail.com>
Suggested-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Sami Imseih <samimseih@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/50cb0c8b-994b-48f9-a1c4-13039eb3536b@eisentraut.org
|
|
ParseFraction only expects to deal with fields that contain a decimal
point and digit(s). However it's possible in some edge cases for it
to be passed input that doesn't look like that. In particular the
input could look like a valid floating-point number, such as ".123e6".
strtod() will happily eat that, possibly producing a result that is
not within the expected range 0..1, which can result in integer
overflow in the callers. That doesn't have any security consequences,
but it's still not very desirable. Fix by checking that the input
has the expected form.
Similarly, DecodeNumberField only expects to deal with fields that
contain a decimal point and digit(s), but it's sometimes abused to
parse strings that might not look like that. This could result in
failure to reject bogus input, yielding silly results. Again, fix
by rejecting input that doesn't look as-expected. That decision
also means that we can affirmatively answer the very old comment
questioning whether we couldn't save some duplicative code by
using ParseFractionalSecond here.
While these changes should only reject input that nobody would
consider valid, it still doesn't seem like a change to make in
stable branches. Apply to HEAD only.
Reported-by: Evgeniy Gorbanev <gorbanev.es@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/1328335.1748371099@sss.pgh.pa.us
|
|
The code that translates SIMILAR TO pattern matching expressions to
POSIX-style regular expressions did not consider that square brackets
can be nested. For example, in an expression like [[:alpha:]%_], the
logic replaced the placeholders '_' and '%' but it should not.
This commit fixes the conversion logic by tracking the nesting level of
square brackets marking character class areas, while considering that
in expressions like []] or [^]] the first closing square bracket is a
regular character. Multiple tests are added to show how the conversions
should or should not apply applied while in a character class area, with
specific cases added for all the characters converted outside character
classes like an opening parenthesis '(', dollar sign '$', etc.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/16ab039d1af455652bdf4173402ddda145f2c73b.camel@cybertec.at
Backpatch-through: 13
|
|
Due to concerns raised about the approach, and memory leaks found
in sensitive contexts the functionality is reverted. This reverts
commits 45e7e8ca9, f8c115a6c, d2a1ed172, 55ef7abf8 and 042a66291
for v18 with an intent to revisit this patch for v19.
Discussion: https://postgr.es/m/594293.1747708165@sss.pgh.pa.us
|
|
xmltotext_with_options sometimes tries to replace the existing
root node of a libxml2 document. In that case xmlDocSetRootElement
will unlink and return the old root node; if we fail to free it,
it's leaked for the remainder of the session. The amount of memory
at stake is not large, a couple hundred bytes per occurrence, but
that could still become annoying in heavy usage.
Our only other xmlDocSetRootElement call is not at risk because
it's working on a just-created document, but let's modify that
code too to make it clear that it's dependent on that.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/1358967.1747858817@sss.pgh.pa.us
Backpatch-through: 16
|
|
In the grammar, <expr> is a c_expr, which accepts only a limited set
of integer literals and simple expressions without parens. The
deparsing logic didn't quite match the grammar rule, and failed to use
parens e.g. for "5::bigint".
To fix, always surround the expression with parens. Would be nice to
omit the parens in simple cases, but unfortunately it's non-trivial to
detect such simple cases. Even if the expression is a simple literal
123 in the original query, after parse analysis it becomes a FuncExpr
with COERCE_IMPLICIT_CAST rather than a simple Const.
Reported-by: yonghao lee
Backpatch-through: 13
Discussion: https://www.postgresql.org/message-id/18929-077d6b7093b176e2@postgresql.org
|
|
The comment describes the order in which fields are sent, and it had one
of the fields in the wrong place.
This has been wrong since e6dbcb72fafa (2008), so backpatch all the way
back.
Author: Emre Hasegeli <emre@hasegeli.com>
Discussion: https://postgr.es/m/CAE2gYzzf38bR_R=izhpMxAmqHXKeM5ajkmukh4mNs_oXfxcMCA@mail.gmail.com
|
|
Added by commit 042a66291b04, no backpatch needed.
|
|
I forgot to run pgindent in d8555e522.
Reported-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Discussion: https://postgr.es/m/156083c9-eac0-418d-9667-92dec4d6d6cd@oss.nttdata.com
|
|
Author: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/CAEG8a3+MRwDKc4YSFKKPKq7Y+vMufVC5u94wM5KZPB2CbgCxnQ@mail.gmail.com
|
|
To estimate with extended statistics, we need to clear the varnullingrels
field in the expression, and duplicates are not allowed in the GroupVarInfo
list. We might re-use add_unique_group_var(), but we don't do so for two
reasons.
1) We must keep the origin_rinfos list ordered exactly the same way as
varinfos.
2) add_unique_group_var() is designed for estimate_num_groups(), where a
larger number of groups is worse. While estimating the number of hash
buckets, we have the opposite: a lesser number of groups is worse.
Therefore, we don't have to remove "known equal" vars: the removed var
may valuably contribute to the multivariate statistics to grow the number
of groups.
This commit adds custom code to estimate_multivariate_bucketsize() to
initialize varinfos properly.
Reported-by: Robins Tharakan <tharakan@gmail.com>
Discussion: https://postgr.es/m/18885-da51324078588253%40postgresql.org
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
|
|
Word boundaries are based on whether a character is alphanumeric or
not. For the PG_UNICODE_FAST collation, alphanumeric includes
non-ASCII digits; whereas for the PG_C_UTF8 collation, it only
includes digits 0-9. Pass down the right information from the
pg_locale_t into initcap_wbnext to differentiate the behavior.
Reported-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Noah Misch <noah@leadboat.com>
Discussion: https://postgr.es/m/20250417135841.33.nmisch@google.com
|
|
Similar to 84fd3bc14 but these ones were found using a regex that can span
multiple lines.
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAApHDvrMcr8XD107H3NV=WHgyBcu=sx5+7=WArr-n_cWUqdFXQ@mail.gmail.com
|
|
These are all new to v18
Author: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAApHDvrMcr8XD107H3NV=WHgyBcu=sx5+7=WArr-n_cWUqdFXQ@mail.gmail.com
|
|
The large majority of these have been introduced by recent commits done
in the v18 development cycle.
Author: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/9a7763ab-5252-429d-a943-b28941e0e28b@gmail.com
|
|
Commit 0bada39c83a150079567a6e97b1a25a198f30ea3 fixed a bug of this kind,
which existed in all branches for six days before detection. While the
probability of reaching the trouble was low, the disruption was extreme. No
new backends could start, and service restoration needed an immediate
shutdown. Hence, add this to catch the next bug like it.
The new check in RelationIdGetRelation() suffices to make autovacuum detect
the bug in commit 243e9b40f1b2dd09d6e5bf91ebf6e822a2cd3704 that led to commit
0bada39. This also checks in a number of similar places. It replaces each
Assert(IsTransactionState()) that pertained to a conditional catalog read.
No back-patch for now, but a back-patch of commit 243e9b4 should back-patch
this, too. A back-patch could omit the src/test/regress changes, since back
branches won't gain new index columns.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/20250410191830.0e.nmisch@google.com
Discussion: https://postgr.es/m/10ec0bc3-5933-1189-6bb8-5dec4114558e@gmail.com
|
|
estimate_multivariate_ndistinct() is coded to assume the caller handles
passing it a list of GroupVarInfos with unique 'var' fields over the
entire list. 6bb6a62f3 added code which didn't ensure this and that
could result in estimate_multivariate_ndistinct() erroring out with:
ERROR: corrupt MVNDistinct entry
This occurred because estimate_multivariate_ndistinct() first searches
for a set of stats that match to at least two of the given GroupVarInfos
and then later assumes that the MVNDistinctItem.items array of the
best matching stats will have an entry for those two columns. If the
GroupVarInfos List contained a duplicate entry then the same column could
be matched to twice and that could trick the code into thinking we have
>= 2 columns matched in cases where only a single distinct column has been
matched. This could result in a failure to find the correct
MVNDistinctItem in the stats as the array containing those never
contains an item for single columns.
Here we make it more clear that the function needs a distinct set of
GroupVarInfos and also tidy up a few other comments to make things a bit
easier to follow.
Author: David Rowley <drowleyml@gmail.com>
Discussion: https://postgr.es/m/CAApHDvocZCUhM9W9mJ39d6oQz7ePKoqFnao_347mvC-A7QatcQ@mail.gmail.com
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in a few places. These
inconsistencies were all introduced during Postgres 18 development.
This commit was written with help from clang-tidy, by mechanically
applying the same rules as similar clean-up commits (the earliest such
commit was commit 035ce1fe).
|
|
Similar to 8461424fd, here we adjust a few new locations which were not
using the most suitable appendStringInfo* function for the intended
purpose.
Author: David Rowley <drowleyml@gmail.com
Discussion: https://postgr.es/m/CAApHDvqJnNjueb=Eoj8K+8n0g7nj_AcPWSiCj5RNV4fDejAfqA@mail.gmail.com
|
|
The global variable backing the DSA area for Memory Context stats
reporting had a too generic name, rename to be more descriptive.
Independently reported by Peter and Laurenz.
Author: Daniel Gustafsson <daniel@yesql.se>
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Reported-by: Laurenz Albe <laurenz.albe@cybertec.at>
Discussion: https://postgr.es/m/d51172bd4e7f4b07a18a0288ca1b1c28a71a5f6a.camel@cybertec.at
Discussion: https://postgr.es/m/25095db5-b595-4b85-9100-d358907c25b5@eisentraut.org
|
|
By inspection, ip_addrsize() can't return a negative result.
(If it could, we'd have way bigger problems elsewhere.)
So delete useless check in network_send(). Most C compilers
are probably perfectly capable of removing this code by
themselves, but it's confusing/misleading.
Bug: #18889
Reported-by: Daniel Elishakov <dan-eli@mail.ru>
Discussion: https://postgr.es/m/18889-73d4f19e953a629e@postgresql.org
|
|
This adds a function for retrieving memory context statistics
and information from backends as well as auxiliary processes.
The intended usecase is cluster debugging when under memory
pressure or unanticipated memory usage characteristics.
When calling the function it sends a signal to the specified
process to submit statistics regarding its memory contexts
into dynamic shared memory. Each memory context is returned
in detail, followed by a cumulative total in case the number
of contexts exceed the max allocated amount of shared memory.
Each process is limited to use at most 1Mb memory for this.
A summary can also be explicitly requested by the user, this
will return the TopMemoryContext and a cumulative total of
all lower contexts.
In order to not block on busy processes the caller specifies
the number of seconds during which to retry before timing out.
In the case where no statistics are published within the set
timeout, the last known statistics are returned, or NULL if
no previously published statistics exist. This allows dash-
board type queries to continually publish even if the target
process is temporarily congested. Context records contain a
timestamp to indicate when they were submitted.
Author: Rahila Syed <rahilasyed90@gmail.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Tomas Vondra <tomas@vondra.me>
Reviewed-by: Atsushi Torikoshi <torikoshia@oss.nttdata.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
Discussion: https://postgr.es/m/CAH2L28v8mc9HDt8QoSJ8TRmKau_8FM_HKS41NeO9-6ZAkuZKXw@mail.gmail.com
|
|
palloc() is invoked with a specific formula for its allocation size in
quote_literal_cstr(). This wastes some memory, but the size is large
enough to cover even the worst-case scenarios.
No explanations were given about the reasons behind these numbers. This
commit adds more documentation about all that.
Author: Steve Chavez <steve@supabase.io>
Discussion: https://postgr.es/m/CAGRrpzZ9bToRWS+fAnjxDJrxwZN1QcJ-y1Pn2yg=Hst6rydLtw@mail.gmail.com
|
|
There were several places in ordering-related planning where a
requirement for btree was hardcoded but an amcanorder index could
suffice. This fixes that. We just need to do the necessary mapping
between strategy numbers and compare types and adjust some related
APIs so that this works independent of btree strategy numbers. For
instance, non-btree amcanorder indexes can now be used to support
sorting and merge joins. Also, predtest.c works independent of btree
strategy numbers now.
To avoid performance regressions, some details on btree and other
built-in index types are still hardcoded as shortcuts, but other index
types now have access to the same features by providing the required
flags and callbacks.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
|
|
Teach nbtree multi-column index scans to opportunistically skip over
irrelevant sections of the index given a query with no "=" conditions on
one or more prefix index columns. When nbtree is passed input scan keys
derived from a predicate "WHERE b = 5", new nbtree preprocessing steps
output "WHERE a = ANY(<every possible 'a' value>) AND b = 5" scan keys.
That is, preprocessing generates a "skip array" (and an output scan key)
for the omitted prefix column "a", which makes it safe to mark the scan
key on "b" as required to continue the scan. The scan is therefore able
to repeatedly reposition itself by applying both the "a" and "b" keys.
A skip array has "elements" that are generated procedurally and on
demand, but otherwise works just like a regular ScalarArrayOp array.
Preprocessing can freely add a skip array before or after any input
ScalarArrayOp arrays. Index scans with a skip array decide when and
where to reposition the scan using the same approach as any other scan
with array keys. This design builds on the design for array advancement
and primitive scan scheduling added to Postgres 17 by commit 5bf748b8.
Testing has shown that skip scans of an index with a low cardinality
skipped prefix column can be multiple orders of magnitude faster than an
equivalent full index scan (or sequential scan). In general, the
cardinality of the scan's skipped column(s) limits the number of leaf
pages that can be skipped over.
The core B-Tree operator classes on most discrete types generate their
array elements with the help of their own custom skip support routine.
This infrastructure gives nbtree a way to generate the next required
array element by incrementing (or decrementing) the current array value.
It can reduce the number of index descents in cases where the next
possible indexable value frequently turns out to be the next value
stored in the index. Opclasses that lack a skip support routine fall
back on having nbtree "increment" (or "decrement") a skip array's
current element by setting the NEXT (or PRIOR) scan key flag, without
directly changing the scan key's sk_argument. These sentinel values
behave just like any other value from an array -- though they can never
locate equal index tuples (they can only locate the next group of index
tuples containing the next set of non-sentinel values that the scan's
arrays need to advance to).
A skip array's range is constrained by "contradictory" inequality keys.
For example, a skip array on "x" will only generate the values 1 and 2
given a qual such as "WHERE x BETWEEN 1 AND 2 AND y = 66". Such a skip
array qual usually has near-identical performance characteristics to a
comparable SAOP qual "WHERE x = ANY('{1, 2}') AND y = 66". However,
improved performance isn't guaranteed. Much depends on physical index
characteristics.
B-Tree preprocessing is optimistic about skipping working out: it
applies static, generic rules when determining where to generate skip
arrays, which assumes that the runtime overhead of maintaining skip
arrays will pay for itself -- or lead to only a modest performance loss.
As things stand, these assumptions are much too optimistic: skip array
maintenance will lead to unacceptable regressions with unsympathetic
queries (queries whose scan can't skip over many irrelevant leaf pages).
An upcoming commit will address the problems in this area by enhancing
_bt_readpage's approach to saving cycles on scan key evaluation, making
it work in a way that directly considers the needs of = array keys
(particularly = skip array keys).
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Masahiro Ikeda <masahiro.ikeda@nttdata.com>
Reviewed-By: Heikki Linnakangas <heikki.linnakangas@iki.fi>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-By: Alena Rybakina <a.rybakina@postgrespro.ru>
Discussion: https://postgr.es/m/CAH2-Wzmn1YsLzOGgjAQZdn1STSG_y8qP__vggTaPAYXJP+G4bw@mail.gmail.com
|
|
Fix for commit 9ef1851685b: We have to skip indexes where sortopfamily
is NULL. This takes the place of the previous btree check. Detected
by valgrind on the buildfarm.
|
|
This was previously not supported because the btree strategy numbers
were hardcoded. Now we can support this for any index that has the
required strategy mapping support and the required operators.
If an index scan used for get_actual_variable_range() requires
recheck, we now just ignore it instead of erroring out. With btree we
knew this couldn't happen, but now it might.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
|
|
compareentry() is declared to work on WordEntryIN structs, but
tsvectorrecv() is using it in two places to work on WordEntry
structs. This is almost okay, since WordEntry is the first
field of WordEntryIN. But on machines with 8-byte pointers,
WordEntryIN will have a larger alignment spec than WordEntry,
and it's at least theoretically possible that the compiler
could generate code that depends on the larger alignment.
Given the lack of field reports, this may be just a hypothetical bug
that upsets nothing except sanitizer tools. Or it may be real on
certain hardware but nobody's tried to use tsvectorrecv() on such
hardware. In any case we should fix it, and the fix is trivial:
just change compareentry() so that it works on WordEntry without any
mention of WordEntryIN. We can also get rid of the quite-useless
intermediate function WordEntryCMP.
Bug: #18875
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18875-07a29c49c825a608@postgresql.org
Backpatch-through: 13
|
|
For GiST, having a sortsupport function allows building the index
using the "sorted build" method, which is much faster.
For b-tree, the sortsupport routine doesn't give any new
functionality, but speeds up sorting a tiny bit. The difference is not
very significant, about 2% in cursory testing on my laptop, because
the range type comparison function has quite a lot of overhead from
detoasting. In any case, since we have the function for GiST anyway,
we might as well register it for the btree opfamily too.
Author: Bernd Helmle <mailings@oopsware.de>
Discussion: https://www.postgresql.org/message-id/64d324ce2a6d535d3f0f3baeeea7b25beff82ce4.camel@oopsware.de
|
|
Create a function that will sort the elements of an array
according to the element type's sort order. If the array
has more than one dimension, the sub-arrays of the first
dimension are sorted per normal array-comparison rules,
leaving their contents alone.
In support of this, add pg_type.typarray to the set of fields
cached by the typcache.
Author: Junwang Zhao <zhjwpku@gmail.com>
Co-authored-by: Jian He <jian.universality@gmail.com>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://postgr.es/m/CAEG8a3J41a4dpw_-F94fF-JPRXYxw-GfsgoGotKcjs9LVfEEvw@mail.gmail.com
|
|
Continuation of work started in commit 15a79c73, after initial trial.
Author: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/b936d2fb-590d-49c3-a615-92c3a88c6c19%40eisentraut.org
|
|
The uuidv7_interval() function previously converted a shifted
microsecond-precision timestamp (64-bit integer) to another 64-bit
integer representing a timestamp with nanosecond precision. This
conversion caused overflow for dates beyond the year 2262. The
millisecond and sub-millisecond parts were then extracted from this
nanosecond-precision timestamp and stored in UUIDv7 values.
With this commit, the millisecond and sub-millisecond parts are stored
directly into the UUIDv7 value without being converted back to a
nanosecond precision timestamp. Following RFC 9562, the timestamp is
stored as an unsigned integer, enabling support for dates up to the
year 10889.
Reported and fixed by Andrey Borodin, with cosmetic changes and
regression tests by me.
Reported-by: Andrey Borodin <x4mmm@yandex-team.ru>
Author: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/96DEC2D9-659A-40E8-B7BA-AF5D162A9E21@yandex-team.ru
|
|
This removes some setlocale() calls and a lot of commentary about how
dangerous that is. strftime_l() is from POSIX 2008, and on Windows we
use _wcsftime_l().
While here, adjust error message for strftime_l() failure: it does not
in practice set errno (even though POSIX says it could), so no %m.
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGJqVe0%2BPv9dvC9dSums_PXxGo9SWcxYAMBguWJUGbWz-A%40mail.gmail.com
|
|
This involves four different implementation strategies:
1. For Windows, we now require _configthreadlocale() to be available
and work (commit f1da075d9a0), and the documentation says that the
object returned by localeconv() is in thread-local memory.
2. For glibc, we translate to nl_langinfo_l() calls, because it
offers the same information that way as an extension, and that API is
thread-safe.
3. For macOS/*BSD, use localeconv_l(), which is thread-safe.
4. For everything else, use uselocale() to set the locale for the
thread, and use a big ugly lock to defend against the returned object
being concurrently clobbered. In practice this currently means only
Solaris.
The new call is used in pg_locale.c, replacing calls to setlocale() and
localeconv().
Author: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/CA%2BhUKGJqVe0%2BPv9dvC9dSums_PXxGo9SWcxYAMBguWJUGbWz-A%40mail.gmail.com
|
|
These are useful general-purpose math functions which are included in
POSIX and C99, and are commonly included in other math libraries, so
expose them as SQL-callable functions.
Author: Dean Rasheed <dean.a.rasheed@gmail.com>
Reviewed-by: Stepan Neretin <sncfmgg@gmail.com>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dmitry Koval <d.koval@postgrespro.ru>
Reviewed-by: Alexandra Wang <alexandra.wang.oss@gmail.com>
Discussion: https://postgr.es/m/CAEZATCXpGyfjXCirFk9au+FvM0y2Ah+2-0WSJx7MO368ysNUPA@mail.gmail.com
|
|
The network (inet) support functions currently only supported a
hardcoded btree operator family. With the generalized compare type
facility, we can generalize this to support any operator family from
any index type that supports the required operators.
Author: Mark Dilger <mark.dilger@enterprisedb.com>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://www.postgresql.org/message-id/flat/E72EAA49-354D-4C2E-8EB9-255197F55330@enterprisedb.com
|
|
Introduce a new conflict type, multiple_unique_conflicts, to handle cases
where an incoming row during logical replication violates multiple UNIQUE
constraints.
Previously, the apply worker detected and reported only the first
encountered key conflict (insert_exists/update_exists), causing repeated
failures as each constraint violation needs to be handled one by one
making the process slow and error-prone.
With this patch, the apply worker checks all unique constraints upfront
once the first key conflict is detected and reports
multiple_unique_conflicts if multiple violations exist. This allows users
to resolve all conflicts at once by deleting all conflicting tuples rather
than dealing with them individually or skipping the transaction.
In the future, this will also allow us to specify different resolution
handlers for such a conflict type.
Add the stats for this conflict type in pg_stat_subscription_stats.
Author: Nisha Moond <nisha.moond412@gmail.com>
Author: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/CABdArM7FW-_dnthGkg2s0fy1HhUB8C3ELA0gZX1kkbs1ZZoV3Q@mail.gmail.com
|
|
If the given input_type yields valid results from both
get_element_type and get_array_type, initArrayResultAny believed the
former and treated the input as an array type. However this is
inconsistent with what get_promoted_array_type does, leading to
situations where the output of an ARRAY() subquery is labeled with
the wrong type: it's labeled as oidvector[] but is really a 2-D
array of OID. That at least results in strange output, and can
result in crashes if further processing such as unnest() is applied.
AFAIK this is only possible with the int2vector and oidvector
types, which are special-cased to be treated mostly as true arrays
even though they aren't quite.
Fix by switching the logic to match get_promoted_array_type by
testing get_array_type not get_element_type, and remove an Assert
thereby made pointless. (We need not introduce a symmetrical
check for get_element_type in the other if-branch, because
initArrayResultArr will check it.) This restores the behavior
that existed before bac27394a introduced initArrayResultAny:
the output really is int2vector[] or oidvector[].
Comparable confusion exists when an input of an ARRAY[] construct
is int2vector or oidvector: transformArrayExpr decides it's dealing
with a multidimensional array constructor, and we end up with
something that's a multidimensional OID array but is alleged to be
of type oidvector. I have not found a crashing case here, but it's
easy to demonstrate totally-wrong results. Adjust that code so
that what you get is an oidvector[] instead, for consistency with
ARRAY() subqueries. (This change also makes these types work like
domains-over-arrays in this context, which seems correct.)
Bug: #18840
Reported-by: yang lei <ylshiyu@126.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18840-fbc9505f066e50d6@postgresql.org
Backpatch-through: 13
|
|
This commit introduces a function for reversing the order of the
bytes in binary strings.
Bumps catversion.
Author: Aleksander Alekseev <aleksander@timescale.com>
Discussion: https://postgr.es/m/CAJ7c6TMe0QVRuNssUArbMi0bJJK32%2BzNA3at5m3osrBQ25MHuw%40mail.gmail.com
|
|
We want to support a "noreturn" decoration on more compilers besides
just GCC-compatible ones, but for that we need to move the decoration
in front of the function declaration instead of either behind it or
wherever, which is the current style afforded by GCC-style attributes.
Also rename the macro to "pg_noreturn" to be similar to the C11
standard "noreturn".
pg_noreturn is now supported on all compilers that support C11 (using
_Noreturn), as well as GCC-compatible ones (using __attribute__, as
before), as well as MSVC (using __declspec). (When PostgreSQL
requires C11, the latter two variants can be dropped.)
Now, all supported compilers effectively support pg_noreturn, so the
extra code for !HAVE_PG_ATTRIBUTE_NORETURN can be dropped.
This also fixes a possible problem if third-party code includes
stdnoreturn.h, because then the current definition of
#define pg_attribute_noreturn() __attribute__((noreturn))
would cause an error.
Note that the C standard does not support a noreturn attribute on
function pointer types. So we have to drop these here. There are
only two instances at this time, so it's not a big loss. In one case,
we can make up for it by adding the pg_noreturn to a wrapper function
and adding a pg_unreachable(), in the other case, the latter was
already done before.
Reviewed-by: Dagfinn Ilmari Mannsåker <ilmari@ilmari.org>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/pxr5b3z7jmkpenssra5zroxi7qzzp6eswuggokw64axmdixpnk@zbwxuq7gbbcw
|
|
Commit 3c152a27b06 mistakenly repeated JSONTYPE_JSON in a condition,
omitting JSONTYPE_CAST. As a result, datum_to_jsonb_internal() failed
to reject inputs that were casts (e.g., from an enum to json as in the
example below) when used as keys in JSON constructors.
This led to a crash in cases like:
SELECT JSON_OBJECT('happy'::mood: '123'::jsonb);
where 'happy'::mood is implicitly cast to json. The missing check
meant such casted values weren’t properly rejected as invalid
(non-scalar) JSON keys.
Reported-by: Maciek Sakrejda <maciek@pganalyze.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Maciek Sakrejda <maciek@pganalyze.com>
Discussion: https://postgr.es/m/CADXhmgTJtJZK9A3Na_ry+Xrq-ghjcejBRhcRMzWZvbd__QdgJA@mail.gmail.com
Backpatch-through: 17
|
|
The only caller, select_best_grantor(), can instead use
pg_popcount64(). This isn't performance-critical code, but we
might as well use the centralized implementation. While at it, add
some test coverage for this part of select_best_grantor().
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/Z9GtL7Nm6hsYyJnF%40nathan
|
|
Up to now we just punted on showing the window definitions used
in a plan, with window function calls represented as "OVER (?)".
To improve that, show the window definition implemented by each
WindowAgg plan node, and reference their window names in OVER.
For nameless window clauses generated by "OVER (...)", assign
unique names w1, w2, etc.
In passing, re-order the properties shown for a WindowAgg node
so that the Run Condition (if any) appears after the Window
property and before the Filter (if any). This seems more
sensible since the Run Condition is associated with the Window
and acts before the Filter.
Thanks to David G. Johnston and Álvaro Herrera for design
suggestions.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/144530.1741469955@sss.pgh.pa.us
|
|
Expose the count of index searches/index descents in EXPLAIN ANALYZE's
output for index scan/index-only scan/bitmap index scan nodes. This
information is particularly useful with scans that use ScalarArrayOp
quals, where the number of index searches can be unpredictable due to
implementation details that interact with physical index characteristics
(at least with nbtree SAOP scans, since Postgres 17 commit 5bf748b8).
The information shown also provides useful context when EXPLAIN ANALYZE
runs a plan with an index scan node that successfully applied the skip
scan optimization (set to be added to nbtree by an upcoming patch).
The instrumentation works by teaching all index AMs to increment a new
nsearches counter whenever a new index search begins. The counter is
incremented at exactly the same point that index AMs already increment
the pg_stat_*_indexes.idx_scan counter (we're counting the same event,
but at the scan level rather than the relation level). Parallel queries
have workers copy their local counter struct into shared memory when an
index scan node ends -- even when it isn't a parallel aware scan node.
An earlier version of this patch that only worked with parallel aware
scans became commit 5ead85fb (though that was quickly reverted by commit
d00107cd following "debug_parallel_query=regress" buildfarm failures).
Our approach doesn't match the approach used when tracking other index
scan related costs (e.g., "Rows Removed by Filter:"). It is comparable
to the approach used in similar cases involving costs that are only
readily accessible inside an access method, not from the executor proper
(e.g., "Heap Blocks:" output for a Bitmap Heap Scan, which was recently
enhanced to show per-worker costs by commit 5a1e6df3, using essentially
the same scheme as the one used here). It is necessary for index AMs to
have direct responsibility for maintaining the new counter, since the
counter might need to be incremented multiple times per amgettuple call
(or per amgetbitmap call). But it is also necessary for the executor
proper to manage the shared memory now used to transfer each worker's
counter struct to the leader.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: Robert Haas <robertmhaas@gmail.com>
Reviewed-By: Tomas Vondra <tomas@vondra.me>
Reviewed-By: Masahiro Ikeda <ikedamsh@oss.nttdata.com>
Reviewed-By: Matthias van de Meent <boekewurm+postgres@gmail.com>
Discussion: https://postgr.es/m/CAH2-WzkRqvaqR2CTNqTZP0z6FuL4-3ED6eQB0yx38XBNj1v-4Q@mail.gmail.com
Discussion: https://postgr.es/m/CAH2-Wz=PKR6rB7qbx+Vnd7eqeB5VTcrW=iJvAsTsKbdG+kW_UA@mail.gmail.com
|
|
This commit adds per-backend WAL statistics, providing the same
information as pg_stat_wal, except that it is now possible to know how
much WAL activity is happening in each backend rather than an overall
aggregate of all the activity. Like pg_stat_wal, the implementation
relies on pgWalUsage, tracking the difference of activity between two
reports to pgstats.
This data can be retrieved with a new system function called
pg_stat_get_backend_wal(), that returns one tuple based on the PID
provided in input. Like pg_stat_get_backend_io(), this is useful when
joined with pg_stat_activity to get a live picture of the WAL generated
for each running backend, showing how the activity is [un]balanced.
pgstat_flush_backend() gains a new flag value, able to control the flush
of the WAL stats.
This commit relies mostly on the infrastructure provided by
9aea73fc61d4, that has introduced backend statistics.
Bump catalog version. A bump of PGSTAT_FILE_FORMAT_ID is not required,
as backend stats do not persist on disk.
Author: Bertrand Drouvot <bertranddrouvot.pg@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Reviewed-by: Xuneng Zhou <xunengzhou@gmail.com>
Discussion: https://postgr.es/m/Z3zqc4o09dM/Ezyz@ip-10-97-1-34.eu-west-3.compute.internal
|
|
Recognizing the real-life complexity where columns in the table often have
functional dependencies, PostgreSQL's estimation of the number of distinct
values over a set of columns can be underestimated (or much rarely,
overestimated) when dealing with multi-clause JOIN. In the case of hash
join, it can end up with a small number of predicted hash buckets and, as
a result, picking non-optimal merge join.
To improve the situation, we introduce one additional stage of bucket size
estimation - having two or more join clauses estimator lookup for extended
statistics and use it for multicolumn estimation. Clauses are grouped into
lists, each containing expressions referencing the same relation. The result
of the multicolumn estimation made over such a list is combined with others
according to the caller's logic. Clauses that are not estimated are returned
to the caller for further estimation.
Discussion: https://postgr.es/m/52257607-57f6-850d-399a-ec33a654457b%40postgrespro.ru
Author: Andrei Lepikhov <lepihov@gmail.com>
Reviewed-by: Andy Fan <zhihui.fan1213@gmail.com>
Reviewed-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Reviewed-by: Alena Rybakina <lena.ribackina@yandex.ru>
Reviewed-by: Alexander Korotkov <aekorotkov@gmail.com>
|
|
This allows smallint, integer, and bigint values to be cast to and
from bytea. The bytea value is the two's complement representation of
the integer, with the most significant byte first. For example:
1234::bytea -> \x000004d2
(-1234)::bytea -> \xfffffb2e
Author: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Joel Jacobson <joel@compiler.org>
Reviewed-by: Yugo Nagata <nagata@sraoss.co.jp>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/CAJ7c6TPtOp6%2BkFX5QX3fH1SVr7v65uHr-7yEJ%3DGMGQi5uhGtcA%40mail.gmail.com
|
