| Age | Commit message (Collapse) | Author |
|---|
|
The order in which GRANTs are output is important as GRANTs which have
been GRANT'd by individuals via WITH GRANT OPTION GRANTs have to come
after the GRANT which included the WITH GRANT OPTION. This happens
naturally in the backend during normal operation as we only change
existing ACLs in-place, only add new ACLs to the end, and when removing
an ACL we remove any which depend on it also.
Also, adjust the comments in acl.h to make this clear.
Unfortunately, the updates to pg_dump to handle initial privileges
involved pulling apart ACLs and then combining them back together and
could end up putting them back together in an invalid order, leading to
dumps which wouldn't restore.
Fix this by adjusting the queries used by pg_dump to ensure that the
ACLs are rebuilt in the same order in which they were originally.
Back-patch to 9.6 where the changes for initial privileges were done.
|
|
Don't move parenthesized lines to the left, even if that means they
flow past the right margin.
By default, BSD indent lines up statement continuation lines that are
within parentheses so that they start just to the right of the preceding
left parenthesis. However, traditionally, if that resulted in the
continuation line extending to the right of the desired right margin,
then indent would push it left just far enough to not overrun the margin,
if it could do so without making the continuation line start to the left of
the current statement indent. That makes for a weird mix of indentations
unless one has been completely rigid about never violating the 80-column
limit.
This behavior has been pretty universally panned by Postgres developers.
Hence, disable it with indent's new -lpl switch, so that parenthesized
lines are always lined up with the preceding left paren.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Change pg_bsd_indent to follow upstream rules for placement of comments
to the right of code, and remove pgindent hack that caused comments
following #endif to not obey the general rule.
Commit e3860ffa4dd0dad0dd9eea4be9cc1412373a8c89 wasn't actually using
the published version of pg_bsd_indent, but a hacked-up version that
tried to minimize the amount of movement of comments to the right of
code. The situation of interest is where such a comment has to be
moved to the right of its default placement at column 33 because there's
code there. BSD indent has always moved right in units of tab stops
in such cases --- but in the previous incarnation, indent was working
in 8-space tab stops, while now it knows we use 4-space tabs. So the
net result is that in about half the cases, such comments are placed
one tab stop left of before. This is better all around: it leaves
more room on the line for comment text, and it means that in such
cases the comment uniformly starts at the next 4-space tab stop after
the code, rather than sometimes one and sometimes two tabs after.
Also, ensure that comments following #endif are indented the same
as comments following other preprocessor commands such as #else.
That inconsistency turns out to have been self-inflicted damage
from a poorly-thought-through post-indent "fixup" in pgindent.
This patch is much less interesting than the first round of indent
changes, but also bulkier, so I thought it best to separate the effects.
Discussion: https://postgr.es/m/E1dAmxK-0006EE-1r@gemulon.postgresql.org
Discussion: https://postgr.es/m/30527.1495162840@sss.pgh.pa.us
|
|
Reformat various places in which pgindent will make a mess, and
fix a few small violations of coding style that I happened to notice
while perusing the diffs from a pgindent dry run.
There is one actual bug fix here: the need-to-enlarge-the-buffer code
path in icu_convert_case was obviously broken. Perhaps it's unreachable
in our usage? Or maybe this is just sadly undertested.
|
|
buildDefaultACLCommands() didn't destroy the string buffer created in
certain cases, leading to a memory leak. Fix by destroying the buffer
before returning from the function.
Spotted by Coverity.
Author: Michael Paquier
Back-patch to 9.6 where buildDefaultACLCommands() was added.
|
|
Extend ALTER DEFAULT PRIVILEGES command to schemas.
Author: Matheus Oliveira
Reviewed-by: Petr Jelínek, Ashutosh Sharma
https://commitfest.postgresql.org/13/887/
|
|
In commit 23f34fa, we changed how ACLs were handled to use the new
pg_init_privs catalog and to dump out the ACL commands as REVOKE+GRANT
combinations instead of trying to REVOKE all rights always and then
GRANT back just the ones which were in place.
Unfortunately, the DEFAULT PRIVILEGES system didn't quite get the
correct treatment with this change and ended up (incorrectly) only
including positive GRANTs instead of both the REVOKEs and GRANTs
necessary to preserve the correct privileges.
There are only a couple cases where such REVOKEs are possible because,
generally speaking, there's few rights which exist on objects by
default to be revoked.
Examples of REVOKEs which weren't being correctly preserved are when
privileges are REVOKE'd from the creator/owner, like so:
ALTER DEFAULT PRIVILEGES
FOR ROLE myrole
REVOKE SELECT ON TABLES FROM myrole;
or when other default privileges are being revoked, such as EXECUTE
rights granted to public for functions:
ALTER DEFAULT PRIVILEGES
FOR ROLE myrole
REVOKE EXECUTE ON FUNCTIONS FROM PUBLIC;
Fix this by correctly working out what the correct REVOKE statements are
(if any) and dump them out, just as we do for everything else.
Noticed while developing additional regression tests for pg_dump, which
will be landing shortly.
Back-patch to 9.6 where the bug was introduced.
|
|
|
|
The need for dumping from such ancient servers has decreased to about nil
in the field, so let's remove all the code that catered to it. Aside
from removing a lot of boilerplate variant queries, this allows us to not
have to cope with servers that don't have (a) schemas or (b) pg_depend.
That means we can get rid of assorted squishy code around that. There
may be some nonobvious additional simplifications possible, but this patch
already removes about 1500 lines of code.
I did not remove the ability for pg_restore to read custom-format archives
generated by these old versions (and light testing says that that does
still work). If you have an old server, you probably also have a pg_dump
that will work with it; but you have an old custom-format backup file,
that might be all you have.
It'd be possible at this point to remove fmtQualifiedId()'s version
argument, but I refrained since that would affect code outside pg_dump.
Discussion: <2661.1475849167@sss.pgh.pa.us>
|
|
|
|
Mostly these are just comments but there are a few in documentation
and a handful in code and tests. Hopefully this doesn't cause too much
unnecessary pain for backpatching. I relented from some of the most
common like "thru" for that reason. The rest don't seem numerous
enough to cause problems.
Thanks to Kevin Lyda's tool https://pypi.python.org/pypi/misspellings
|
|
All of the other tables used in the query in dumpTable(), which is
collecting column-level ACLs, are qualified, so we should be qualifying
the pg_init_privs, the related sub-select against pg_class and the
other queries added by the pg_dump catalog ACLs work.
Also, use ::regclass (or ::pg_catalog.regclass, where appropriate)
instead of using a poorly constructed query to get the OID for various
catalog tables.
Issues identified by Noah and Alvaro, patch by me.
|
|
Now that all of the infrastructure exists, add in the ability to
dump out the ACLs of the objects inside of pg_catalog or the ACLs
for objects which are members of extensions, but only if they have
been changed from their original values.
The original values are tracked in pg_init_privs. When pg_dump'ing
9.6-and-above databases, we will dump out the ACLs for all objects
in pg_catalog and the ACLs for all extension members, where the ACL
has been changed from the original value which was set during either
initdb or CREATE EXTENSION.
This should not change dumps against pre-9.6 databases.
Reviews by Alexander Korotkov, Jose Luis Tallon
|
|
Per discussion, we want to create a static library and put the stuff into
it that until now has been shared across src/bin/ directories by ad-hoc
methods like symlinking a source file. This commit creates the library and
populates it with a couple of files that contain the widely-useful portions
of pg_dump's dumputils.c file. dumputils.c survives, because it has some
stuff that didn't seem appropriate for fe_utils, but it's significantly
smaller and is no longer referenced from any other directory.
Follow-on patches will move more stuff into fe_utils.
The Mkvcbuild.pm hacking here is just a best guess; we'll see how the
buildfarm likes it.
|
|
Now that we have src/common/ for code shared between frontend and backend,
we can get rid of (most of) the klugy ways that the keyword table and
keyword lookup code were formerly shared between different uses.
This is a first step towards a more general plan of getting rid of
special-purpose kluges for sharing code in src/bin/.
I chose to merge kwlookup.c back into keywords.c, as it once was, and
always has been so far as keywords.h is concerned. We could have
kept them separate, but there is noplace that uses ScanKeywordLookup
without also wanting access to the backend's keyword list, so there
seems little point.
ecpg is still a bit weird, but at least now the trickiness is documented.
I think that the MSVC build script should require no adjustments beyond
what's done here ... but we'll soon find out.
|
|
Backpatch certain files through 9.1
|
|
'\"' is more commonly written simply as '"'.
|
|
Patch provides command line option --strict-names which requires that at
least one table/schema should present for each -t/-n option.
Pavel Stehule <pavel.stehule@gmail.com>
|
|
Replace some bogus "x[1]" declarations with "x[FLEXIBLE_ARRAY_MEMBER]".
Aside from being more self-documenting, this should help prevent bogus
warnings from static code analyzers and perhaps compiler misoptimizations.
This patch is just a down payment on eliminating the whole problem, but
it gets rid of a lot of easy-to-fix cases.
Note that the main problem with doing this is that one must no longer rely
on computing sizeof(the containing struct), since the result would be
compiler-dependent. Instead use offsetof(struct, lastfield). Autoconf
also warns against spelling that offsetof(struct, lastfield[0]).
Michael Paquier, review and additional fixes by me.
|
|
We already had one go at this issue in commit d73b7f973db5ec7e, but we
failed to notice that buildACLCommands also leaked several PQExpBuffers
along with a simply malloc'd string. This time let's try to make the
fix a bit more future-proof by eliminating the separate exit path.
It's still not exactly critical because pg_dump will curl up and die on
failure; but since the amount of the potential leak is now several KB,
it seems worth back-patching as far as 9.2 where the previous fix landed.
Per Coverity, which evidently is smarter than clang's static analyzer.
|
|
Backpatch certain files through 9.0
|
|
This includes removing tabs after periods in C comments, which was
applied to back branches, so this change should not effect backpatching.
|
|
Update all files in head, and files COPYRIGHT and legal.sgml in all back
branches.
|
|
Arguably makes the code a bit more readable, and might give a small
performance gain.
David Rowley
|
|
Move functions used only by pg_dump and pg_restore from dumputils.c to a new
file, pg_backup_utils.c. dumputils.c is linked into psql and some programs
in bin/scripts, so it seems good to keep it slim. The parallel functionality
is moved to parallel.c, as is exit_horribly, because the interesting code in
exit_horribly is parallel-related.
This refactoring gets rid of the on_exit_msg_func function pointer. It was
problematic, because a modern gcc version with -Wmissing-format-attribute
complained if it wasn't marked with PF_PRINTF_ATTRIBUTE, but the ancient gcc
version that Tom Lane's old HP-UX box has didn't accept that attribute on a
function pointer, and gave an error. We still use a similar function pointer
trick for getLocalPQBuffer() function, to use a thread-local version of that
in parallel mode on Windows, but that dodges the problem because it doesn't
take printf-like arguments.
|
|
For getting the server's version in numeric form, use PQserverVersion().
It does the exact same parsing as dumputils.c's parse_version(), and has
been around in libpq for a long time. For the client's version, just use
the PG_VERSION_NUM constant.
|
|
New infrastructure is added which creates a set number of workers
(threads on Windows, forked processes on Unix). Jobs are then
handed out to these workers by the master process as needed.
pg_restore is adjusted to use this new infrastructure in place of the
old setup which created a new worker for each step on the fly. Parallel
dumps acquire a snapshot clone in order to stay consistent, if
available.
The parallel option is selected by the -j / --jobs command line
parameter of pg_dump.
Joachim Wieland, lightly editorialized by Andrew Dunstan.
|
|
libpgcommon is a new static library to allow sharing code among the
various frontend programs and backend; this lets us eliminate duplicate
implementations of common routines. We avoid libpgport, because that's
intended as a place for porting issues; per discussion, it seems better
to keep them separate.
The first use case, and the only implemented by this patch, is pg_malloc
and friends, which many frontend programs were already using.
At the same time, we can use this to provide palloc emulation functions
for the frontend; this way, some palloc-using files in the backend can
also be used by the frontend cleanly. To do this, we change palloc() in
the backend to be a function instead of a macro on top of
MemoryContextAlloc(). This was previously believed to cause loss of
performance, but this implementation has been tweaked by Tom and Andres
so that on modern compilers it provides a slight improvement over the
previous one.
This lets us clean up some places that were already with
localized hacks.
Most of the pg_malloc/palloc changes in this patch were authored by
Andres Freund. Zoltán Böszörményi also independently provided a form of
that. libpgcommon infrastructure was authored by Álvaro.
|
|
On top of the previous support in pg_dump, add support to specify
multiple tables (by using the -t option multiple times) to
pg_restore, clsuterdb, reindexdb and vacuumdb.
Josh Kupershmidt, reviewed by Karl O. Pinc
|
|
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
|
Commit 729205571e81b4767efc42ad7beb53663e08d1ff added privileges on data
types, but there were a number of oversights. The implementation of
default privileges for types missed a few places, and pg_dump was
utterly innocent of the whole concept. Per bug #7741 from Nathan Alden,
and subsequent wider investigation.
|
|
|
|
commit-fest.
|
|
|
|
This is currently only cosmetic, since all the call sites just curl up
and die in event of a failure return. It might be important for some
future use-case, though, and in any case it quiets warnings from the
clang static analyzer (as reported by Anna Zaks).
Josh Kupershmidt
|
|
The initial implementation of pg_dump's --section option supposed that the
existing --schema-only and --data-only options could be made equivalent to
--section settings. This is wrong, though, due to dubious but long since
set-in-stone decisions about where to dump SEQUENCE SET items, as seen in
bug report from Martin Pitt. (And I'm not totally convinced there weren't
other bugs, either.) Undo that coupling and instead drive --section
filtering off current-section state tracked as we scan through the TOC
list to call _tocEntryRequired().
To make sure those decisions don't shift around and hopefully save a few
cycles, run _tocEntryRequired() only once per TOC entry and save the result
in a new TOC field. This required minor rejiggering of ACL handling but
also allows a far cleaner implementation of inhibit_data_for_failed_table.
Also, to ensure that pg_dump and pg_restore have the same behavior with
respect to the --section switches, add _tocEntryRequired() filtering to
WriteToc() and WriteDataChunks(), rather than trying to implement section
filtering in an entirely orthogonal way in dumpDumpableObject(). This
required adjusting the handling of the special ENCODING and STDSTRINGS
items, but they were pretty weird before anyway.
Minor other code review for the patch, too.
|
|
Report by Andrew Dunstan.
|
|
Extracted from Joachim Wieland's parallel pg_dump patch, with some
additional comments by me.
|
|
ecpg and pg_dump each contain keyword arrays with structure similar
to the backend's keyword array. Up to now, we actually named those
arrays the same as the backend's and relied on parser/keywords.h
to declare them. This seems a tad too cute, though, and it breaks
now that we need to PGDLLIMPORT-decorate the backend symbols.
Rename to avoid the problem. Per buildfarm.
(It strikes me that maybe we should get rid of the separate keywords.c
files altogether, and just define these arrays in the modules that use
them, but that's a rather more invasive change.)
|
|
The old code was using exit_horribly or die_horribly other depending on
whether it had an ArchiveHandle on which to close the connection or not;
but there were places that were passing a NULL ArchiveHandle to
die_horribly, and other places that used exit_horribly while having an
AH available. So there wasn't all that much consistency.
Improve the situation by keeping only one of the routines, and instead
of having to pass the AH down from the caller, arrange for it to be
present for an on_exit_nicely callback to operate on.
Author: Joachim Wieland
Some tweaks by me
Per a suggestion from Robert Haas, in the ongoing "parallel pg_dump"
saga.
|
|
Per recent discussions on pgsql-hackers regarding parallel pg_dump.
|
|
|
|
Valid values are --pre-data, data and post-data. The option can be
given more than once. --schema-only is equivalent to
--section=pre-data --section=post-data. --data-only is equivalent
to --section=data.
Andrew Dunstan, reviewed by Joachim Wieland and Josh Berkus.
|
|
Fix entirely broken handling of va_list printing routines, update some
out-of-date comments, fix some bogus inclusion orders, fix NLS declarations,
fix missed realloc calls.
|
|
pg_dumpall to use the same memory allocation functions as the others.
|
|
with its original functions. The previous function migration would
cause too many difficulties in back-patching.
|
|
ignoring errors and call-site error checking.
|
|
This requires a new shared catalog, pg_shseclabel.
Along the way, fix the security_label regression tests so that they
don't monkey with the labels of any pre-existing objects. This is
unlikely to matter in practice, since only the label for the "dummy"
provider was being manipulated. But this way still seems cleaner.
KaiGai Kohei, with fairly extensive hacking by me.
|
|
|
|
Foreign tables are a core component of SQL/MED. This commit does
not provide a working SQL/MED infrastructure, because foreign tables
cannot yet be queried. Support for foreign table scans will need to
be added in a future patch. However, this patch creates the necessary
system catalog structure, syntax support, and support for ancillary
operations such as COMMENT and SECURITY LABEL.
Shigeru Hanada, heavily revised by Robert Haas
|
