| Age | Commit message (Collapse) | Author |
|---|
|
These don't offer anything over plain Assert, and their usage had
already been declared obsolescent.
Author: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/20221009210148.GA900071@nathanxps13
|
|
This commit moves pg_pwritev_with_retry(), a convenience wrapper of
pg_writev() able to handle partial writes, to common/file_utils.c so
that the frontend code is able to use it. A first use-case targetted
for this routine is pg_basebackup and pg_receivewal, for the
zero-padding of a newly-initialized WAL segment. This is used currently
in the backend when the GUC wal_init_zero is enabled (default).
Author: Bharath Rupireddy
Reviewed-by: Nathan Bossart, Thomas Munro
Discussion: https://postgr.es/m/CALj2ACUq7nAb7=bJNbK3yYmp-SZhJcXFR_pLk8un6XgDzDF3OA@mail.gmail.com
|
|
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
|
|
This prevents marking the argument string for translation for gettext,
and it also prevents the given string (which is already translated) from
being translated at runtime.
Also, mark the strings used as arguments to check_rolespec_name for
translation.
Backpatch all the way back as appropriate. None of this is caught by
any tests (necessarily so), so I verified it manually.
|
|
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
|
|
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
|
|
|
|
The bounds hardcoded in compression.c since ffd5365 (minimum at 1 and
maximum at 22) do not match the reality of what zstd is able to
handle, these values being available via ZSTD_maxCLevel() and
ZSTD_minCLevel() at run-time. The maximum of 22 is actually correct
in recent versions, but the minimum was not as the library can go down
to -131720 by design. This commit changes the code to use the run-time
values in the code instead of some hardcoded ones.
Zstd seems to assume that these bounds could change in the future, and
Postgres will be able to adapt automatically to such changes thanks to
what's being done in this commit.
Reported-by: Justin Prysby
Discussion: https://postgr.es/m/20220922033716.GL31833@telsasoft.com
Backpatch-through: 15
|
|
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
|
|
PG_COMPRESSION_OPTION_LEVEL is removed from the compression
specification logic, and instead the compression level is always
assigned with each library's default if nothing is directly given. This
centralizes the checks on the compression methods supported by a given
build, and always assigns a default compression level when parsing a
compression specification. This results in complaining at an earlier
stage than previously if a build supports a compression method or not,
aka when parsing a specification in the backend or the frontend, and not
when processing it. zstd, lz4 and zlib are able to handle in their
respective routines setting up the compression level the case of a
default value, hence the backend or frontend code (pg_receivewal or
pg_basebackup) has now no need to know what the default compression
level should be if nothing is specified: the logic is now done so as the
specification parsing assigns it. It can also be enforced by passing
down a "level" set to the default value, that the backend will accept
(the replication protocol is for example able to handle a command like
BASE_BACKUP (COMPRESSION_DETAIL 'gzip:level=-1')).
This code simplification fixes an issue with pg_basebackup --gzip
introduced by ffd5365, where the tarball of the streamed WAL segments
would be created as of pg_wal.tar.gz with uncompressed contents, while
the intention is to compress the segments with gzip at a default level.
The origin of the confusion comes from the handling of the default
compression level of gzip (-1 or Z_DEFAULT_COMPRESSION) and the value of
0 was getting assigned, which is what walmethods.c would consider
as equivalent to no compression when streaming WAL segments with its tar
methods. Assigning always the compression level removes the confusion
of some code paths considering a value of 0 set in a specification as
either no compression or a default compression level.
Note that 010_pg_basebackup.pl has to be adjusted to skip a few tests
where the shape of the compression detail string for client and
server-side compression was checked using gzip. This is a result of the
code simplification, as gzip specifications cannot be used if a build
does not support it.
Reported-by: Tom Lane
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/1400032.1662217889@sss.pgh.pa.us
Backpatch-through: 15
|
|
Rather than replace each unprintable byte with a '?' character, replace
it with a hex escape instead. The API now allocates a copy rather than
modifying the input in place.
Author: Jacob Champion <jchampion@timescale.com>
Discussion: https://www.postgresql.org/message-id/CAAWbhmgsvHrH9wLU2kYc3pOi1KSenHSLAHBbCVmmddW6-mc_=w@mail.gmail.com
|
|
Commit d8594d123 updated the list of non-spacing codepoints used
for calculating display width, but in doing so inadvertently removed
some, since the script used for that commit only considered combining
characters.
For complete coverage for zero-width characters, include codepoints in
the category Cf (Format). To reflect the wider purpose, also rename files
and update comments that referred specifically to combining characters.
Some of these ranges have been missing since v12, but due to lack of
field complaints it was determined not important enough to justify adding
special-case logic the backbranches.
Kyotaro Horiguchi
Report by Pavel Stehule
Discussion: https://www.postgresql.org/message-id/flat/CAFj8pRBE8yvpQ0FSkPCoe0Ny1jAAsAQ6j3qMgVwWvkqAoaaNmQ%40mail.gmail.com
|
|
This adds some uses of the new palloc/pg_malloc variants here and
there as a demonstration and test. This is kept separate from the
actual API patch, since the latter might be backpatched at some point.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/bb755632-2a43-d523-36f8-a1e7a389a907@enterprisedb.com
|
|
This commit changes the following code paths to do direct system calls
to some WIN32 functions rather than loading them from an external
library, shaving some code in the process:
- Creation of restricted tokens in pg_ctl.c, introduced by a25cd81.
- QuerySecurityContextToken() in auth.c for SSPI authentication in the
backend, introduced in d602592.
- CreateRestrictedToken() in src/common/. This change is similar to the
case of pg_ctl.c.
Most of these functions were loaded rather than directly called because,
as mentioned in the code comments, MinGW headers were not declaring
them. I have double-checked the recent MinGW code, and all the
functions changed here are declared in its headers, so this change
should be safe. Note that I do not have a MinGW environment at hand so
I have not tested it directly, but that MSVC was fine with the change.
The buildfarm will tell soon enough if this change is appropriate or not
for a much broader set of environments.
A few code paths still use GetProcAddress() to load some functions:
- LDAP authentication for ldap_start_tls_sA(), where I am not confident
that this change would work.
- win32env.c and win32ntdll.c where we have a per-MSVC version
dependency for the name of the library loaded.
- crashdump.c for MiniDumpWriteDump() and EnumDirTree(), where direct
calls were not able to work after testing.
Reported-by: Thomas Munro
Reviewed-by: Justin Prysby
Discussion: https://postgr.es/m/CA+hUKG+BMdcaCe=P-EjMoLTCr3zrrzqbcVE=8h5LyNsSVHKXZA@mail.gmail.com
|
|
Use optimized linear search when looking ahead for end quotes,
backslashes, and non-printable characters. This results in nearly 40%
faster JSON parsing on x86-64 when most values are long strings, and
all platforms should see some improvement.
Reviewed by Andres Freund and Nathan Bossart
Discussion: https://www.postgresql.org/message-id/CAFBsxsGhaR2KQ5eisaK%3D6Vm60t%3DaxhD8Ckj1qFoCH1pktZi%2B2w%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/CAFBsxsESLUyJ5spfOSyPrOvKUEYYNqsBosue9SV1j8ecgNXSKA%40mail.gmail.com
|
|
More than twenty years ago (79fcde48b), we hacked the postmaster
to avoid a core-dump on systems that didn't support fflush(NULL).
We've mostly, though not completely, hewed to that rule ever since.
But such systems are surely gone in the wild, so in the spirit of
cleaning out no-longer-needed portability hacks let's get rid of
multiple per-file fflush() calls in favor of using fflush(NULL).
Also, we were fairly inconsistent about whether to fflush() before
popen() and system() calls. While we've received no bug reports
about that, it seems likely that at least some of these call sites
are at risk of odd behavior, such as error messages appearing in
an unexpected order. Rather than expend a lot of brain cells
figuring out which places are at hazard, let's just establish a
uniform coding rule that we should fflush(NULL) before these calls.
A no-op fflush() is surely of trivial cost compared to launching
a sub-process via a shell; while if it's not a no-op then we likely
need it.
Discussion: https://postgr.es/m/2923412.1661722825@sss.pgh.pa.us
|
|
Per flame graph from Jelte Fennema, COPY FROM ... USING BINARY shows
input validation taking at least 5% of the profile, so it's worth trying
to be more efficient here. With this change, validation of pure ASCII is
nearly 40% faster on contemporary Intel hardware. To make this change
legible and easier to adopt to additional architectures, use helper
functions to abstract the platform details away.
Reviewed by Nathan Bossart
Discussion: https://www.postgresql.org/message-id/CAFBsxsG%3Dk8t%3DC457FXnoBXb%3D8iA4OaZkbFogFMachWif7mNnww%40mail.gmail.com
|
|
It's not necessary to fill in sun_len when calling bind() or connect(),
on all known systems that have it.
Discussion: https://postgr.es/m/2781112.1644819528%40sss.pgh.pa.us
|
|
Remove four probes for members of sockaddr_storage. Keep only the probe
for sockaddr's sa_len, which is enough for our two remaining places that
know about _len fields:
1. ifaddr.c needs to know if sockaddr has sa_len to understand the
result of ioctl(SIOCGIFCONF). Only AIX is still using the relevant code
today, but it seems like a good idea to keep it compilable on Linux.
2. ip.c was testing for presence of ss_len to decide whether to fill in
sun_len in our getaddrinfo_unix() function. It's just as good to test
for sa_len. If you have one, you have them all.
(The code in #2 isn't actually needed at all on several OSes I checked
since modern versions ignore sa_len on input to system calls. Proving
that's the case for all relevant OSes is left for another day, but
wouldn't get rid of that last probe anyway if we still want it for #1.)
Discussion: https://postgr.es/m/CA%2BhUKGJJjF2AqdU_Aug5n2MAc1gr%3DGykNjVBZq%2Bd6Jrcp3Dyvg%40mail.gmail.com
|
|
<netinet/tcp.h> is in SUSv3 and all targeted Unix systems have it.
For Windows, we can provide a stub include file, to avoid some #ifdef
noise.
Discussion: https://postgr.es/m/CA+hUKGKErNfhmvb_H0UprEmp4LPzGN06yR2_0tYikjzB-2ECMw@mail.gmail.com
|
|
Since HAVE_UNIX_SOCKETS is now defined unconditionally, remove the macro
and drop a small amount of dead code.
The last known systems not to have them (as far as I know at least) were
QNX, which we de-supported years ago, and Windows, which now has them.
If a new OS ever shows up with the POSIX sockets API but without working
AF_UNIX, it'll presumably still be able to compile the code, and fail at
runtime with an unsupported address family error. We might want to
consider adding a HINT that you should turn off the option to use it if
your network stack doesn't support it at that point, but it doesn't seem
worth making the relevant code conditional at compile time.
Also adjust a couple of places in the docs and comments that referred to
builds without Unix-domain sockets, since there aren't any. Windows
still gets a special mention in those places, though, because we don't
try to use them by default there yet.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
|
|
Now that lstat() reports junction points with S_IFLNK/S_ISLINK(), and
unlink() can unlink them, there is no need for conditional code for
Windows in a few places. That was expressed by testing for WIN32 or
S_ISLNK, which we can now constant-fold.
The coding around pgwin32_is_junction() was a bit suspect anyway, as we
never checked for errors, and we also know that errors can be spuriously
reported because of transient sharing violations on this OS. The
lstat()-based code has handling for that.
This also reverts 4fc6b6ee on master only. That was done because
lstat() didn't previously work for symlinks (junction points), but now
it does.
Tested-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/CA%2BhUKGLfOOeyZpm5ByVcAt7x5Pn-%3DxGRNCvgiUPVVzjFLtnY0w%40mail.gmail.com
|
|
symlink() and readlink() are in SUSv2 and all targeted Unix systems have
them. We have partial emulation on Windows. Code that raised runtime
errors on systems without it has been dead for years, so we can remove
that and also references to such systems in the documentation.
Define HAVE_READLINK and HAVE_SYMLINK macros on Unix. Our Windows
replacement functions based on junction points can't be used for
relative paths or for non-directories, so the macros can be used to
check for full symlink support. The places that deal with tablespaces
can just use symlink functions without checking the macros. (If they
did check the macros, they'd need to provide an #else branch with a
runtime or compile time error, and it'd be dead code.)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJ3LHeP9w5Fgzdr4G8AnEtJ=z=p6hGDEm4qYGEUX5B6fQ@mail.gmail.com
|
|
On Windows with MSVC, get_dirent_type() was recently made to return
DT_LNK for junction points by commit 9d3444dc, which fixed some
defective dirent.c code.
On Windows with Cygwin, get_dirent_type() already worked for symlinks,
as it does on POSIX systems, because Cygwin has its own fake symlinks
that behave like POSIX (on closer inspection, Cygwin's dirent has the
BSD d_type extension but it's probably always DT_UNKNOWN, so we fall
back to lstat(), which understands Cygwin symlinks with S_ISLNK()).
On Windows with MinGW/MSYS, we need extra code, because the MinGW
runtime has its own readdir() without d_type, and the lstat()-based
fallback has no knowledge of our convention for treating junctions as
symlinks.
Back-patch to 14, where get_dirent_type() landed.
Reported-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/b9ddf605-6b36-f90d-7c30-7b3e95c46276%40dunslane.net
|
|
This is in preparation for building postgres with meson / ninja.
When building with meson, commands are run at the root of the build tree. Add
an option to put build output into the appropriate place.
Author: Andres Freund <andres@anarazel.de>
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/5e216522-ba3c-f0e6-7f97-5276d0270029@enterprisedb.com
|
|
This replaces all MemSet() calls with struct initialization where that
is easily and obviously possible. (For example, some cases have to
worry about padding bits, so I left those.)
(The same could be done with appropriate memset() calls, but this
patch is part of an effort to phase out MemSet(), so it doesn't touch
memset() calls.)
Reviewed-by: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://www.postgresql.org/message-id/9847b13c-b785-f4e2-75c3-12ec77a3b05c@enterprisedb.com
|
|
validate_exec() didn't guarantee to set errno to something appropriate
after a failure, leading to callers not being able to print an on-point
message. Improve that.
Noted by Kyotaro Horiguchi, though this isn't exactly his proposal.
Discussion: https://postgr.es/m/20220615.131403.1791191615590453058.horikyota.ntt@gmail.com
|
|
Commit 3838fa269 added a lookahead loop to allow building strings multiple
bytes at a time. This loop could exit because it reached the end of input,
yet did not check for that before checking if we reached the end of a
valid string. To fix, put the end of string check back in the outer loop.
Per Valgrind animal skink
|
|
During COPY BINARY with large JSONB blobs, it was found that half
the time was spent parsing JSON, with much of that spent in separate
appendStringInfoChar() calls for each input byte.
Add lookahead loop to json_lex_string() to allow batching multiple bytes
via appendBinaryStringInfo(). Also use this same logic when de-escaping
is not done, to avoid code duplication.
Report and proof of concept patch by Jelte Fennema, reworked by Andres
Freund and John Naylor
Discussion: https://www.postgresql.org/message-id/CAGECzQQuXbies_nKgSiYifZUjBk6nOf2%3DTSXqRjj2BhUh8CTeA%40mail.gmail.com
Discussion: https://www.postgresql.org/message-id/flat/PR3PR83MB0476F098CBCF68AF7A1CA89FF7B49@PR3PR83MB0476.EURPRD83.prod.outlook.com
|
|
Instead of updating the length as we go, use a const pointer to end of
the input, which we know already at the start.
This simplifies the coding and may improve performance slightly, but
the real motivation for doing this is to make further changes in this
area easier to reason about.
Discussion: https://www.postgresql.org/message-id/CAFBsxsGhaR2KQ5eisaK%3D6Vm60t%3DaxhD8Ckj1qFoCH1pktZi%2B2w%40mail.gmail.com
|
|
We have been using the term RelFileNode to refer to either (1) the
integer that is used to name the sequence of files for a certain relation
within the directory set aside for that tablespace/database combination;
or (2) that value plus the OIDs of the tablespace and database; or
occasionally (3) the whole series of files created for a relation
based on those values. Using the same name for more than one thing is
confusing.
Replace RelFileNode with RelFileNumber when we're talking about just the
single number, i.e. (1) from above, and with RelFileLocator when we're
talking about all the things that are needed to locate a relation's files
on disk, i.e. (2) from above. In the places where we refer to (3) as
a relfilenode, instead refer to "relation storage".
Since there is a ton of SQL code in the world that knows about
pg_class.relfilenode, don't change the name of that column, or of other
SQL-facing things that derive their name from it.
On the other hand, do adjust closely-related internal terminology. For
example, the structure member names dbNode and spcNode appear to be
derived from the fact that the structure itself was called RelFileNode,
so change those to dbOid and spcOid. Likewise, various variables with
names like rnode and relnode get renamed appropriately, according to
how they're being used in context.
Hopefully, this is clearer than before. It is also preparation for
future patches that intend to widen the relfilenumber fields from its
current width of 32 bits. Variables that store a relfilenumber are now
declared as type RelFileNumber rather than type Oid; right now, these
are the same, but that can now more easily be changed.
Dilip Kumar, per an idea from me. Reviewed also by Andres Freund.
I fixed some whitespace issues, changed a couple of words in a
comment, and made one other minor correction.
Discussion: http://postgr.es/m/CA+TgmoamOtXbVAQf9hWFzonUo6bhhjS6toZQd7HZ-pmojtAmag@mail.gmail.com
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
Discussion: http://postgr.es/m/CAFiTN-vTe79M8uDH1yprOU64MNFE+R3ODRuA+JWf27JbhY4hJw@mail.gmail.com
|
|
Per applicable standards, free() with a null pointer is a no-op.
Systems that don't observe that are ancient and no longer relevant.
Some PostgreSQL code already required this behavior, so this change
does not introduce any new requirements, just makes the code more
consistent.
Discussion: https://www.postgresql.org/message-id/flat/dac5d2d0-98f5-94d9-8e69-46da2413593d%40enterprisedb.com
|
|
This makes the output line up better and allows filtering messages by
command.
Discussion: https://www.postgresql.org/message-id/ba6d4fac-9e33-91f9-94fb-1e4c144a48b9@enterprisedb.com
|
|
Run pgindent, pgperltidy, and reformat-dat-files.
I manually fixed a couple of comments that pgindent uglified.
|
|
Setting up an EVP context for ciphers banned under FIPS generate
two OpenSSL errors in the queue, and as we only consume one from
the queue the other is at the head for the next invocation:
postgres=# select md5('foo');
ERROR: could not compute MD5 hash: unsupported
postgres=# select md5('foo');
ERROR: could not compute MD5 hash: initialization error
Clearing the error queue when creating the context ensures that
we don't pull in an error from an earlier operation.
Discussion: https://postgr.es/m/C89D932C-501E-4473-9750-638CFCD9095E@yesql.se
|
|
For some reason by default the mingw C Runtime takes it upon itself to
expand program arguments that look like shell globbing characters. That
has caused much scratching of heads and mis-attribution of the causes of
some TAP test failures, so stop doing that.
This removes an inconsistency with Windows binaries built with MSVC,
which have no such behaviour.
Per suggestion from Noah Misch.
Backpatch to all live branches.
Discussion: https://postgr.es/m/20220423025927.GA1274057@rfd.leadboat.com
|
|
It failed to provide an error string as expected for the
admittedly-unlikely case of OOM in pg_cryptohash_create().
Also, make it initialize *errstr to NULL for success,
as pg_md5_binary() does.
Also add missing comments. Readers should not have to
reverse-engineer the API spec for a publicly visible routine.
|
|
These are useless and distracting. We wouldn't have written the code
with them to begin with, so there's no reason to keep them.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Discussion: https://postgr.es/m/attachment/133167/0016-Extraneous-blank-lines.patch
|
|
Enforce __pg_log_level message filtering centrally in logging.c,
instead of relying on the calling macros to do it. This is more
reliable (e.g. it works correctly for direct calls to pg_log_generic)
and it saves a percent or so of total code size because we get rid of
so many duplicate checks of __pg_log_level.
This does mean that argument expressions in a logging macro will be
evaluated even if we end up not printing anything. That seems of
little concern for INFO and higher levels as those messages are printed
by default, and most of our frontend programs don't even offer a way to
turn them off. I left the unlikely() checks in place for DEBUG
messages, though.
Discussion: https://postgr.es/m/3993549.1649449609@sss.pgh.pa.us
|
|
Compression option handling (level, algorithm or even workers) can be
used across several parts of the system and not only base backups.
Structures, objects and routines are renamed in consequence, to remove
the concept of base backups from this part of the code making this
change straight-forward.
pg_receivewal, that has gained support for LZ4 since babbbb5, will make
use of this infrastructure for its set of compression options, bringing
more consistency with pg_basebackup. This cleanup needs to be done
before releasing a beta of 15. pg_dump is a potential future target, as
well, and adding more compression options to it may happen in 16~.
Author: Michael Paquier
Reviewed-by: Robert Haas, Georgios Kokolatos
Discussion: https://postgr.es/m/YlPQGNAAa04raObK@paquier.xyz
|
|
As before, the defaults are similar to gcc's default appearance.
|
|
Get rid of the separate "FATAL" log level, as it was applied
so inconsistently as to be meaningless. This mostly involves
s/pg_log_fatal/pg_log_error/g.
Create a macro pg_fatal() to handle the common use-case of
pg_log_error() immediately followed by exit(1). Various
modules had already invented either this or equivalent macros;
standardize on pg_fatal() and apply it where possible.
Invent the ability to add "detail" and "hint" messages to a
frontend message, much as we have long had in the backend.
Except where rewording was needed to convert existing coding
to detail/hint style, I have (mostly) resisted the temptation
to change existing message wording.
Patch by me. Design and patch reviewed at various stages by
Robert Haas, Kyotaro Horiguchi, Peter Eisentraut and
Daniel Gustafsson.
Discussion: https://postgr.es/m/1363732.1636496441@sss.pgh.pa.us
|
|
Per Coverity and Tom Lane. Reviewed by Tom Lane and Justin Pryzby.
Discussion: http://postgr.es/m/384291.1648403267@sss.pgh.pa.us
|
|
libzstd allows transparent parallel compression just by setting
an option when creating the compression context, so permit that
for both client and server-side backup compression. To use this,
use something like pg_basebackup --compress WHERE-zstd:workers=N
where WHERE is "client" or "server" and N is an integer.
When compression is performed on the server side, this will spawn
threads inside the PostgreSQL backend. While there is almost no
PostgreSQL server code which is thread-safe, the threads here are used
internally by libzstd and touch only data structures controlled by
libzstd.
Patch by me, based in part on earlier work by Dipesh Pandit
and Jeevan Ladhe. Reviewed by Justin Pryzby.
Discussion: http://postgr.es/m/CA+Tgmobj6u-nWF-j=FemygUhobhryLxf9h-wJN7W-2rSsseHNA@mail.gmail.com
|
|
Author: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/616c6873-83b5-85c0-93cb-548977c39c60@enterprisedb.com
|
|
This code shouldn't be reached, but having it here might avoid a
compiler warning.
Per CI complaint from Andres Freund.
Discussion: http://postgr.es/m/C6A7643A-582B-47F7-A03D-01736BC0349B@anarazel.de
|
|
There are more compression parameters that can be specified than just
an integer compression level, so rename the new COMPRESSION_LEVEL
option to COMPRESSION_DETAIL before it gets released. Introduce a
flexible syntax for that option to allow arbitrary options to be
specified without needing to adjust the main replication grammar,
and common code to parse it that is shared between the client and
the server.
This commit doesn't actually add any new compression parameters,
so the only user-visible change is that you can now type something
like pg_basebackup --compress gzip:level=5 instead of writing just
pg_basebackup --compress gzip:5. However, it should make it easy to
add new options. If for example gzip starts offering fries, we can
support pg_basebackup --compress gzip:level=5,fries=true for the
benefit of users who want fries with that.
Along the way, this fixes a few things in pg_basebackup so that the
pg_basebackup can be used with a server-side compression algorithm
that pg_basebackup itself does not understand. For example,
pg_basebackup --compress server-lz4 could still succeed even if
only the server and not the client has LZ4 support, provided that
the other options to pg_basebackup don't require the client to
decompress the archive.
Patch by me. Reviewed by Justin Pryzby and Dagfinn Ilmari Mannsåker.
Discussion: http://postgr.es/m/CA+TgmoYvpetyRAbbg1M8b3-iHsaN4nsgmWPjOENu5-doHuJ7fA@mail.gmail.com
|
|
There were a number of places in the code that used bespoke bit-twiddling
expressions to do bitwise rotation. While we've had pg_rotate_right32()
for a while now, we hadn't gotten around to standardizing on that. Do so
now. Since many potential call sites look more natural with the "left"
equivalent, add that function too.
Reviewed by Tom Lane and Yugo Nagata
Discussion:
https://www.postgresql.org/message-id/CAFBsxsH7c1LC0CGZ0ADCBXLHU5-%3DKNXx-r7tHYPAW51b2HK4Qw%40mail.gmail.com
|
|
On AIX 7.1, struct sockaddr_un is declared to be 1025 bytes long,
but the sun_len field that should hold the length is only a byte.
Clamp the value we try to store to ensure it will fit in the field.
(This coding might need adjustment if there are any machines out
there where sun_len is as wide as size_t; but a preliminary survey
suggests there's not, so let's keep it simple.)
Discussion: https://postgr.es/m/2781112.1644819528@sss.pgh.pa.us
|
|
The previous coding was correct, but the style and commentary were a bit
vague about which operations had to happen, in what circumstances, and
in what order. Rearrange so that the epilogue does nothing in the DFA END
state. That allows turning some conditional statements in the backtracking
logic into asserts. With that, we can be more explicit about needing
to backtrack at least one byte in non-END states to ensure checking the
current byte sequence in the slow path. No change to the regression tests,
since they should be able catch deficiencies here already.
In passing, improve the comments around DFA states where the first
continuation byte has a restricted range.
|
