| Age | Commit message (Collapse) | Author |
|---|
|
This also works for compressed tar-format backups. However, -n must be
used, because we use pg_waldump to verify WAL, and it doesn't yet know
how to verify WAL that is stored inside of a tarfile.
Amul Sul, reviewed by Sravan Kumar and by me, and revised by me.
|
|
Since commit 2549f0661, we reject an identifier immediately following
a numeric literal (without separating whitespace), because that risks
ambiguity with hex/octal/binary integers. However, that patch used
token patterns like "{integer}{ident_start}", which is problematic
because {ident_start} matches only a single byte. If the first
character after the integer is a multibyte character, this ends up
with flex reporting an error message that includes a partial multibyte
character. That can cause assorted bad-encoding problems downstream,
both in the report to the client and in the postmaster log file.
To fix, use {identifier} not {ident_start} in the "junk" token
patterns, so that they will match complete multibyte characters.
This seems generally better user experience quite aside from the
encoding problem: for "123abc" the error message will now say that
the error appeared at or near "123abc" instead of "123a".
While at it, add some commentary about why these patterns exist
and how they work.
Report and patch by Karina Litskevich; review by Pavel Borisov.
Back-patch to v15 where the problem came in.
Discussion: https://postgr.es/m/CACiT8iZ_diop=0zJ7zuY3BXegJpkKK1Av-PU7xh0EDYHsa5+=g@mail.gmail.com
|
|
Author: Alexander Lakhin
Discussion: https://postgr.es/m/f7e514cf-2446-21f1-a5d2-8c089a6e2168@gmail.com
|
|
Duplicate the comment from astreamer_plain_writer_new instead of just
referring to it. Add a further note to mention that there are dangers
if anything else is written to the same FILE. Also add a comment where
we dup() the filehandle, referring to the existing comment in
astreamer_gzip_writer_finalize(), because the dup() looks wrong on
first glance without that comment to clarify.
Per concerns expressed by Tom Lane on pgsql-security, and using
some wording suggested by him.
Discussion: http://postgr.es/m/CA+TgmoYTFAD0YTh4HC1Nuhn0YEyoQi0_CENFgVzAY_YReiSksQ@mail.gmail.com
|
|
Make it clear that "astreamer" stands for "archive streamer".
Generalize comments that still believe this code can only be used
by pg_basebackup. Add some comments explaining the asymmetry
between the gzip, lz4, and zstd astreamers, in the hopes of making
life easier for anyone who hacks on this code in the future.
Robert Haas, reviewed by Amul Sul.
Discussion: http://postgr.es/m/CAAJ_b97O2kkKVTWxt8MxDN1o-cDfbgokqtiN2yqFf48=gXpcxQ@mail.gmail.com
|
|
This allows the code to be used by other frontend applications.
Amul Sul, reviewed by Sravan Kumar, Andres Freund (whose input
I specifically solicited regarding the meson.build changes),
and me.
Discussion: http://postgr.es/m/CAAJ_b94StvLWrc_p4q-f7n3OPfr6GhL8_XuAg2aAaYZp1tF-nw@mail.gmail.com
|
|
Commit faff8f8e47 allowed integer literals to contain underscores, but
failed to update the lexer's "numericfail" rule. As a result, a
decimal integer literal containing underscores would fail to parse, if
used in an integer range with no whitespace after the first number,
such as "1_001..1_003" in a PL/pgSQL FOR loop.
Fix and backpatch to v16, where support for underscores in integer
literals was added.
Report and patch by Erik Wienhold.
Discussion: https://postgr.es/m/808ce947-46ec-4628-85fa-3dd600b2c154%40ewie.name
|
|
After further review, we want to move in the direction of always
quoting GUC names in error messages, rather than the previous (PG16)
wildly mixed practice or the intermittent (mid-PG17) idea of doing
this depending on how possibly confusing the GUC name is.
This commit applies appropriate quotes to (almost?) all mentions of
GUC names in error messages. It partially supersedes a243569bf65 and
8d9978a7176, which had moved things a bit in the opposite direction
but which then were abandoned in a partial state.
Author: Peter Smith <smithpb2250@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAHut%2BPv-kSN8SkxSdoHano_wPubqcg5789ejhCDZAcLFceBR-w%40mail.gmail.com
|
|
Underscores were added to numeric literals in faff8f8e47. This change
also affected the positional parameters (e.g., $1) rule, which uses
the same production for its digits. But this did not actually work,
because the digits for parameters are processed using atol(), which
does not handle underscores and ignores whatever it cannot parse.
The underscores notation is probably not useful for positional
parameters, so for simplicity revert that rule to its old form that
only accepts digits 0-9.
Author: Erik Wienhold <ewie@ewie.name>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/5d216d1c-91f6-4cbe-95e2-b4cbd930520c%40ewie.name
|
|
Author: Alexander Lakhin
Discussion: https://postgr.es/m/ae9f2fcb-4b24-5bb0-4240-efbbbd944ca1@gmail.com
|
|
Commit cca97ce6a665 allowed dbname in pg_basebackup connstring and in this
commit we allow it to be written in postgresql.auto.conf when -R option is
used. The database name in the connection string will be used by the
logical replication slot synchronization on standby.
The dbname will be recorded only if specified explicitly in the connection
string or environment variable.
Masahiko Sawada hasn't reviewed the code in detail but endorsed the idea.
Author: Vignesh C, Kuroda Hayato
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAB8KJ=hdKdg+UeXhReeHpHA6N6v3e0qFF+ZsPFHk9_ThWKf=2A@mail.gmail.com
|
|
Commit 61461a300c1c introduced new functions to libpq for cancelling
queries. This replaces the usage of the old ones in parts of the
codebase with these newer ones. This specifically leaves out changes to
psql and pgbench, as those would need a much larger refactor to be able
to call them due to the new functions not being signal-safe; and also
postgres_fdw, because the original code there is not clear to me
(Álvaro) and not fully tested.
Author: Jelte Fennema-Nio <postgres@jeltef.nl>
Discussion: https://postgr.es/m/CAGECzQT_VgOWWENUqvUV9xQmbaCyXjtRRAYO8W07oqashk_N+g@mail.gmail.com
|
|
Discussion: https://www.postgresql.org/message-id/flat/5ac50071-f2ed-4ace-a8fd-b892cffd33eb@www.fastmail.com
|
|
Presently, we rely on each individual signal handler to save the
initial value of errno and then restore it before returning if
needed. This is easily forgotten and, if missed, often goes
undetected for a long time.
In commit 3b00fdba9f, we introduced a wrapper signal handler
function that checks whether MyProcPid matches getpid(). This
commit moves the aforementioned errno restoration code from the
individual signal handlers to the new wrapper handler so that we no
longer need to worry about missing it.
Reviewed-by: Andres Freund, Noah Misch
Discussion: https://postgr.es/m/20231121212008.GA3742740%40nathanxps13
|
|
Reported-by: Michael Paquier
Discussion: https://postgr.es/m/ZZKTDPxBBMt3C0J9@paquier.xyz
Backpatch-through: 12
|
|
The last use of this variable in the loop body was removed by commit
93df658a0189.
|
|
The original code would miscalculate the total number of cells when the
table to print has more than ~4 billion cells, leading to an unnecessary
error. Repair by changing some computations to be 64-bits wide. Add
some necessary overflow checks.
Author: Hongxu Ma <interma@outlook.com>
Discussion: https://postgr.es/m/TYBP286MB0351B057B101C90D7C1239E6B4E2A@TYBP286MB0351.JPNP286.PROD.OUTLOOK.COM
|
|
A PostgreSQL release tarball contains a number of prebuilt files, in
particular files produced by bison, flex, perl, and well as html and
man documentation. We have done this consistent with established
practice at the time to not require these tools for building from a
tarball. Some of these tools were hard to get, or get the right
version of, from time to time, and shipping the prebuilt output was a
convenience to users.
Now this has at least two problems:
One, we have to make the build system(s) work in two modes: Building
from a git checkout and building from a tarball. This is pretty
complicated, but it works so far for autoconf/make. It does not
currently work for meson; you can currently only build with meson from
a git checkout. Making meson builds work from a tarball seems very
difficult or impossible. One particular problem is that since meson
requires a separate build directory, we cannot make the build update
files like gram.h in the source tree. So if you were to build from a
tarball and update gram.y, you will have a gram.h in the source tree
and one in the build tree, but the way things work is that the
compiler will always use the one in the source tree. So you cannot,
for example, make any gram.y changes when building from a tarball.
This seems impossible to fix in a non-horrible way.
Second, there is increased interest nowadays in precisely tracking the
origin of software. We can reasonably track contributions into the
git tree, and users can reasonably track the path from a tarball to
packages and downloads and installs. But what happens between the git
tree and the tarball is obscure and in some cases non-reproducible.
The solution for both of these issues is to get rid of the step that
adds prebuilt files to the tarball. The tarball now only contains
what is in the git tree (*). Getting the additional build
dependencies is no longer a problem nowadays, and the complications to
keep these dual build modes working are significant. And of course we
want to get the meson build system working universally.
This commit removes the make distprep target altogether. The make
dist target continues to do its job, it just doesn't call distprep
anymore.
(*) - The tarball also contains the INSTALL file that is built at make
dist time, but not by distprep. This is unchanged for now.
The make maintainer-clean target, whose job it is to remove the
prebuilt files in addition to what make distclean does, is now just an
alias to make distprep. (In practice, it is probably obsolete given
that git clean is available.)
The following programs are now hard build requirements in configure
(they were already required by meson.build):
- bison
- flex
- perl
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://www.postgresql.org/message-id/flat/e07408d9-e5f2-d9fd-5672-f53354e9305e@eisentraut.org
|
|
Starting on 2023-08-03, this intermittently terminated a "pgbench -C"
test in CI. It could affect a high-client-count "pgbench" without "-C".
While parallel reindexdb and vacuumdb reach the same problematic check,
sufficient client count and/or connection turnover is less plausible for
them. Given the lack of examples from the buildfarm or from manual
builds, reproducing this must entail rare operating system
configurations. Also correct the associated error message, which was
wrong for non-Windows. Back-patch to v12, where the pgbench check first
appeared. While v11 vacuumdb has the problematic check, reaching it
with typical vacuumdb usage is implausible.
Reviewed by Thomas Munro.
Discussion: https://postgr.es/m/CA+hUKG+JwvTNdcyJTriy9BbtzF1veSRQ=9M_ZKFn9_LqE7Kp7Q@mail.gmail.com
|
|
This commit allows specifying a --sync-method in several frontend
utilities that must synchronize many files to disk (initdb,
pg_basebackup, pg_checksums, pg_dump, pg_rewind, and pg_upgrade).
On Linux, users can specify "syncfs" to synchronize the relevant
file systems instead of calling fsync() for every single file. In
many cases, using syncfs() is much faster.
As with recovery_init_sync_method, this new option comes with some
caveats. The descriptions of these caveats have been moved to a
new appendix section in the documentation.
Co-authored-by: Justin Pryzby
Reviewed-by: Michael Paquier, Thomas Munro, Robert Haas, Justin Pryzby
Discussion: https://postgr.es/m/20210930004340.GM831%40telsasoft.com
|
|
Commits 83dec5a712 and ff402ae11b taught vacuumdb to reuse
passwords instead of prompting repeatedly. However, the docs still
warn about repeated prompts, and this improvement was not applied
to clusterdb and reindexdb. This commit allows clusterdb and
reindexdb to reuse passwords just like vacuumdb does, and it
expunges the aforementioned warnings from the docs.
Reviewed-by: Gurjeet Singh, Zhang Mingli
Discussion: https://postgr.es/m/20230628045741.GA1813397%40nathanxps13
|
|
This commit comes as a continuation of the discussion that has led to
d522b05, as \v was handled inconsistently when parsing array values or
anything going through the parsers, and changing a parser behavior in
stable branches is a scary thing to do. The parsing of array values now
uses the more central scanner_isspace() and array_isspace() is removed.
As pointing out by Peter Eisentraut, fix a confusing reference to
horizontal space in the parsers with the term "horiz_space". \f was
included in this set since 3cfdd8f from 2000, but it is not horizontal.
"horiz_space" is renamed to "non_newline_space", to refer to all
whitespace characters except newlines.
The changes impact the parsers for the backend, psql, seg, cube, ecpg
and replication commands. Note that JSON should not escape \v, as per
RFC 7159, so these are not touched.
Reviewed-by: Peter Eisentraut, Tom Lane
Discussion: https://postgr.es/m/ZJKcjNwWHHvw9ksQ@paquier.xyz
|
|
Run pgindent, pgperltidy, and reformat-dat-files.
This set of diffs is a bit larger than typical. We've updated to
pg_bsd_indent 2.1.2, which properly indents variable declarations that
have multi-line initialization expressions (the continuation lines are
now indented one tab stop). We've also updated to perltidy version
20230309 and changed some of its settings, which reduces its desire to
add whitespace to lines to make assignments etc. line up. Going
forward, that should make for fewer random-seeming changes to existing
code.
Discussion: https://postgr.es/m/20230428092545.qfb3y5wcu4cm75ur@alvherre.pgsql
|
|
This reverts commits 24c35ec and 57169ad. PreRestoreCommand() and
PostRestoreCommand() need to be put closer to the system() call calling
a restore_command, as they enable in_restore_command for the startup
process which would in turn trigger an immediate proc_exit() in the
SIGTERM handler. Perhaps we could get rid of this behavior entirely,
but 24c35ec has made the window where the flag is enabled much larger
than it was, and any Postgres-like actions (palloc, etc.) taken by code
paths while the flag is enabled could lead to more severe issues in the
shutdown processing.
Note that curculio has showed that there are much more problems in this
area, unrelated to this change, actually, hence the issues related to
that had better be addressed first. Keeping the code of HEAD in line
with the stable branches should make that a bit easier.
Per discussion with Andres Freund and Nathan Bossart.
Discussion: https://postgr.es/m/Y979NR3U5VnWrTwB@paquier.xyz
|
|
This allows underscores to be used in integer and numeric literals,
and their corresponding type input functions, for visual grouping.
For example:
1_500_000_000
3.14159_26535_89793
0xffff_ffff
0b_1001_0001
A single underscore is allowed between any 2 digits, or immediately
after the base prefix indicator of non-decimal integers, per SQL:202x
draft.
Peter Eisentraut and Dean Rasheed
Discussion: https://postgr.es/m/84aae844-dc55-a4be-86d9-4f0fa405cc97%40enterprisedb.com
|
|
Presently, restore_command uses a different code path than
archive_cleanup_command and recovery_end_command. These code paths
are similar and can be easily combined, as long as it is possible to
identify if a command should:
- Issue a FATAL on signal.
- Exit immediately on SIGTERM.
While on it, this removes src/common/archive.c and its associated
header. Since the introduction of c96de2c, BuildRestoreCommand() has
become a simple wrapper of replace_percent_placeholders() able to call
make_native_path(). This simplifies shell_restore.c as long as
RestoreArchivedFile() includes a call to make_native_path().
Author: Nathan Bossart
Reviewed-by: Andres Freund, Michael Paquier
Discussion: https://postgr.es/m/20221227192449.GA3672473@nathanxps13
|
|
There are a number of places where a shell command is constructed with
percent-placeholders (like %x). It's cumbersome to have to open-code
this several times. This factors out this logic into a separate
function. This also allows us to ensure consistency for and document
some subtle behaviors, such as what to do with unrecognized
placeholders.
The unified handling is now that incorrect and unknown placeholders
are an error, where previously in most cases they were skipped or
ignored. This affects the following settings:
- archive_cleanup_command
- archive_command
- recovery_end_command
- restore_command
- ssl_passphrase_command
The following settings are part of this refactoring but already had
stricter error handling and should be unchanged in their behavior:
- basebackup_to_shell.command
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/5238bbed-0b01-83a6-d4b2-7eb0562a054e%40enterprisedb.com
|
|
VACUUM normally ends by running vac_update_datfrozenxid(), which
requires a scan of pg_class. Therefore, if one attempts to vacuum a
database one table at a time --- as vacuumdb has done since v12 ---
we will spend O(N^2) time in vac_update_datfrozenxid(). That causes
serious performance problems in databases with tens of thousands of
tables, and indeed the effect is measurable with only a few hundred.
To add insult to injury, only one process can run
vac_update_datfrozenxid at the same time per DB, so this behavior
largely defeats vacuumdb's -j option.
Hence, invent options SKIP_DATABASE_STATS and ONLY_DATABASE_STATS
to allow applications to postpone vac_update_datfrozenxid() until the
end of a series of VACUUM requests, and teach vacuumdb to use them.
Per bug #17717 from Gunnar L. Sadly, this answer doesn't seem
like something we'd consider back-patching, so the performance
problem will remain in v12-v15.
Tom Lane and Nathan Bossart
Discussion: https://postgr.es/m/17717-6c50eb1c7d23a886@postgresql.org
|
|
Backpatch-through: 11
|
|
Discussion: https://postgr.es/m/222b43a5-2fb3-2c1b-9cd0-375d376c8246@dunslane.net
|
|
Add support for hexadecimal, octal, and binary integer literals:
0x42F
0o273
0b100101
per SQL:202x draft.
This adds support in the lexer as well as in the integer type input
functions.
Reviewed-by: John Naylor <john.naylor@enterprisedb.com>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Reviewed-by: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/b239564c-cad0-b23e-c57e-166d883cb97d@enterprisedb.com
|
|
This substantially speeds up building for windows, due to the vast amount of
headers included via windows.h. A cross build from linux targetting mingw goes
from
994.11user 136.43system 0:31.58elapsed 3579%CPU
to
422.41user 89.05system 0:14.35elapsed 3562%CPU
The wins on windows are similar-ish (but I don't have a system at hand just
now for actual numbers). Targetting other operating systems the wins are far
smaller (tested linux, macOS, FreeBSD).
For now precompiled headers are disabled by default, it's not clear how well
they work on all platforms. E.g. on FreeBSD gcc doesn't seem to have working
support, but clang does.
When doing a full build precompiled headers are only beneficial for targets
with multiple .c files, as meson builds a separate precompiled header for each
target (so that different compilation options take effect). This commit
therefore only changes target with at least two .c files to use precompiled
headers.
Because this commit adds b_pch=false to the default_options new build
directories will have precompiled headers disabled by default, however
existing build directories will continue use the default value of b_pch, which
is true.
Note that using precompiled headers with ccache requires setting
CCACHE_SLOPPINESS=pch_defines,time_macros to get hits.
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/c5736f70-bb6d-8d25-e35c-e3d886e4e905@enterprisedb.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
|
|
When using precompiled headers, we cannot pre-define macros for the system
headers from within .c files, as headers are already processed before
the #define in the C file is reached. But we can pre-define using
-DFD_SETSIZE, as long as that's also used when building the precompiled header.
A few files #define FD_SETSIZE 1024 on windows, as the default is only 64. I
am hesitant to change FD_SETSIZE globally on windows, due to
src/backend/port/win32/socket.c using it to size on-stack arrays. Instead add
-DFD_SETSIZE=1024 when building the specific targets needing it.
We likely should move away from using select() in those places, but that's a
larger change.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Reviewed-by: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20221005190829.lda7ttalh4mzrvf4@awork3.anarazel.de
Discussion: https://postgr.es/m/CA+hUKG+50eOUbN++ocDc0Qnp9Pvmou23DSXu=ZA6fepOcftKqA@mail.gmail.com
Discussion: https://postgr.es/m/20190826054000.GE7005%40paquier.xyz
|
|
There are still some alignment-related failures in the buildfarm,
which might or might not be able to be fixed quickly, but I've also
just realized that it increased the size of many WAL records by 4 bytes
because a block reference contains a RelFileLocator. The effect of that
hasn't been studied or discussed, so revert for now.
|
|
Reported by Justin Pryzby.
Discussion: http://postgr.es/m/20220927185121.GE6256@telsasoft.com
|
|
RelFileNumbers are now assigned using a separate counter, instead of
being assigned from the OID counter. This counter never wraps around:
if all 2^56 possible RelFileNumbers are used, an internal error
occurs. As the cluster is limited to 2^64 total bytes of WAL, this
limitation should not cause a problem in practice.
If the counter were 64 bits wide rather than 56 bits wide, we would
need to increase the width of the BufferTag, which might adversely
impact buffer lookup performance. Also, this lets us use bigint for
pg_class.relfilenode and other places where these values are exposed
at the SQL level without worrying about overflow.
This should remove the need to keep "tombstone" files around until
the next checkpoint when relations are removed. We do that to keep
RelFileNumbers from being recycled, but now that won't happen
anyway. However, this patch doesn't actually change anything in
this area; it just makes it possible for a future patch to do so.
Dilip Kumar, based on an idea from Andres Freund, who also reviewed
some earlier versions of the patch. Further review and some
wordsmithing by me. Also reviewed at various points by Ashutosh
Sharma, Vignesh C, Amul Sul, Álvaro Herrera, and Tom Lane.
Discussion: http://postgr.es/m/CA+Tgmobp7+7kmi4gkq7Y+4AM9fTvL+O1oQ4-5gFTT+6Ng-dQ=g@mail.gmail.com
|
|
Autoconf is showing its age, fewer and fewer contributors know how to wrangle
it. Recursive make has a lot of hard to resolve dependency issues and slow
incremental rebuilds. Our home-grown MSVC build system is hard to maintain for
developers not using Windows and runs tests serially. While these and other
issues could individually be addressed with incremental improvements, together
they seem best addressed by moving to a more modern build system.
After evaluating different build system choices, we chose to use meson, to a
good degree based on the adoption by other open source projects.
We decided that it's more realistic to commit a relatively early version of
the new build system and mature it in tree.
This commit adds an initial version of a meson based build system. It supports
building postgres on at least AIX, FreeBSD, Linux, macOS, NetBSD, OpenBSD,
Solaris and Windows (however only gcc is supported on aix, solaris). For
Windows/MSVC postgres can now be built with ninja (faster, particularly for
incremental builds) and msbuild (supporting the visual studio GUI, but
building slower).
Several aspects (e.g. Windows rc file generation, PGXS compatibility, LLVM
bitcode generation, documentation adjustments) are done in subsequent commits
requiring further review. Other aspects (e.g. not installing test-only
extensions) are not yet addressed.
When building on Windows with msbuild, builds are slower when using a visual
studio version older than 2019, because those versions do not support
MultiToolTask, required by meson for intra-target parallelism.
The plan is to remove the MSVC specific build system in src/tools/msvc soon
after reaching feature parity. However, we're not planning to remove the
autoconf/make build system in the near future. Likely we're going to keep at
least the parts required for PGXS to keep working around until all supported
versions build with meson.
Some initial help for postgres developers is at
https://wiki.postgresql.org/wiki/Meson
With contributions from Thomas Munro, John Naylor, Stone Tickle and others.
Author: Andres Freund <andres@anarazel.de>
Author: Nazir Bilal Yavuz <byavuz81@gmail.com>
Author: Peter Eisentraut <peter@eisentraut.org>
Reviewed-By: Peter Eisentraut <peter.eisentraut@enterprisedb.com>
Discussion: https://postgr.es/m/20211012083721.hvixq4pnh2pixr3j@alap3.anarazel.de
|
|
Make sure that function declarations use names that exactly match the
corresponding names from function definitions in optimizer, parser,
utility, libpq, and "commands" code, as well as in remaining library
code. Do the same for all code related to frontend programs (with the
exception of pg_dump/pg_dumpall related code).
Like other recent commits that cleaned up function parameter names, this
commit was written with help from clang-tidy. Later commits will handle
ecpg and pg_dump/pg_dumpall.
Author: Peter Geoghegan <pg@bowt.ie>
Reviewed-By: David Rowley <dgrowleyml@gmail.com>
Discussion: https://postgr.es/m/CAH2-WznJt9CMM9KJTMjJh_zbL5hD9oX44qdJ4aqZtjFi-zA3Tg@mail.gmail.com
|
|
More than twenty years ago (79fcde48b), we hacked the postmaster
to avoid a core-dump on systems that didn't support fflush(NULL).
We've mostly, though not completely, hewed to that rule ever since.
But such systems are surely gone in the wild, so in the spirit of
cleaning out no-longer-needed portability hacks let's get rid of
multiple per-file fflush() calls in favor of using fflush(NULL).
Also, we were fairly inconsistent about whether to fflush() before
popen() and system() calls. While we've received no bug reports
about that, it seems likely that at least some of these call sites
are at risk of odd behavior, such as error messages appearing in
an unexpected order. Rather than expend a lot of brain cells
figuring out which places are at hazard, let's just establish a
uniform coding rule that we should fflush(NULL) before these calls.
A no-op fflush() is surely of trivial cost compared to launching
a sub-process via a shell; while if it's not a no-op then we likely
need it.
Discussion: https://postgr.es/m/2923412.1661722825@sss.pgh.pa.us
|
|
While waiting for slots to become available in wait_on_slots() in
parallel_slot.c, the cancellation always relied on the first connection
in the set to do the job. This could cause problems when this slot's
socket is gone as PQgetCancel() would return NULL in this case. Rather
than always using the first connection, this changes the logic to use
the first valid connection for the cancellation.
Author: Ranier Vilela
Reviewed-by: Justin Pryzby
Discussion: https://postgr.es/m/CAEudQAokk1h_pUwGXsYS4oVOuf35s1O2o3TXGHpV8=AWikvgHA@mail.gmail.com
Backpatch-through: 14
|
|
<sys/select.h> is in SUSv3 and every targeted Unix system has it.
Provide an empty header in src/include/port/win32 so that we can
include it unguarded even on Windows.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKG%2BL_3brvh%3D8e0BW_VfX9h7MtwgN%3DnFHP5o7X2oZucY9dg%40mail.gmail.com
|
|
Masahiko Sawada
Discussion: https://www.postgresql.org/message-id/CAD21AoASq93KPiNxipPaTCzEdsnxT9665UesOnWcKhmX9Qfx6A@mail.gmail.com
|
|
The setting controls tha maximum length of the header line in expanded
format output. Possible settings are full, column, page, or an integer.
the default is full, the current behaviour, and in this case the header
line is the length of the widest line of output. column causes the
header to be truncated to the width of the first column, page causes it
to be truncated to the width of the terminal page, and an integer causes
it to be truncated to that value. If the full value is less than the
page or integer value no truncation occurs. If given without an argument
this option prints its current setting.
Platon Pronko, somewhat modified by me.
Discussion: https://postgr.es/m/f03d38a3-db96-a56e-d1bc-dbbc80bbde4d@gmail.com
|
|
Tang Haiying and Tom Lane
Discussion: https://postgr.es/m/OS0PR01MB6113EA19F05E217C823B4CCAFB909@OS0PR01MB6113.jpnprd01.prod.outlook.com
|
|
These functions already had the free()-like behavior of handling null
pointers as a no-op. But it wasn't documented, so add it explicitly
to the documentation, too.
Discussion: https://www.postgresql.org/message-id/flat/dac5d2d0-98f5-94d9-8e69-46da2413593d%40enterprisedb.com
|
|
Per applicable standards, free() with a null pointer is a no-op.
Systems that don't observe that are ancient and no longer relevant.
Some PostgreSQL code already required this behavior, so this change
does not introduce any new requirements, just makes the code more
consistent.
Discussion: https://www.postgresql.org/message-id/flat/dac5d2d0-98f5-94d9-8e69-46da2413593d%40enterprisedb.com
|
|
psql, pg_dump, and pg_amcheck share code to process object name
patterns like 'foo*.bar*' to match all tables with names starting in
'bar' that are in schemas starting with 'foo'. Before v14, any number
of extra name parts were silently ignored, so a command line '\d
foo.bar.baz.bletch.quux' was interpreted as '\d bletch.quux'. In v14,
as a result of commit 2c8726c4b0a496608919d1f78a5abc8c9b6e0868, we
instead treated this as a request for table quux in a schema named
'foo.bar.baz.bletch'. That caused problems for people like Justin
Pryzby who were accustomed to copying strings of the form
db.schema.table from messages generated by PostgreSQL itself and using
them as arguments to \d.
Accordingly, revise things so that if an object name pattern contains
more parts than we're expecting, we throw an error, unless there's
exactly one extra part and it matches the current database name.
That way, thisdb.myschema.mytable is accepted as meaning just
myschema.mytable, but otherdb.myschema.mytable is an error, and so
is some.random.garbage.myschema.mytable.
Mark Dilger, per report from Justin Pryzby and discussion among
various people.
Discussion: https://www.postgresql.org/message-id/20211013165426.GD27491%40telsasoft.com
|
|
These are useless and distracting. We wouldn't have written the code
with them to begin with, so there's no reason to keep them.
Author: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20220411020336.GB26620@telsasoft.com
Discussion: https://postgr.es/m/attachment/133167/0016-Extraneous-blank-lines.patch
|
|
Get rid of the separate "FATAL" log level, as it was applied
so inconsistently as to be meaningless. This mostly involves
s/pg_log_fatal/pg_log_error/g.
Create a macro pg_fatal() to handle the common use-case of
pg_log_error() immediately followed by exit(1). Various
modules had already invented either this or equivalent macros;
standardize on pg_fatal() and apply it where possible.
Invent the ability to add "detail" and "hint" messages to a
frontend message, much as we have long had in the backend.
Except where rewording was needed to convert existing coding
to detail/hint style, I have (mostly) resisted the temptation
to change existing message wording.
Patch by me. Design and patch reviewed at various stages by
Robert Haas, Kyotaro Horiguchi, Peter Eisentraut and
Daniel Gustafsson.
Discussion: https://postgr.es/m/1363732.1636496441@sss.pgh.pa.us
|
|
Plain \dconfig is basically equivalent to SHOW except that you can
give it a pattern with wildcards, either to match multiple GUCs or
because you don't exactly remember the name you want.
\dconfig+ adds type, context, and access-privilege information,
mainly because every other kind of object privilege has a psql command
to show it, so GUC privileges should too. (A form of this command was
in some versions of the patch series leading up to commit a0ffa885e.
We pulled it out then because of doubts that the design and code were
up to snuff, but I think subsequent work has resolved that.)
In passing, fix incorrect completion of GUC names in GRANT/REVOKE
ON PARAMETER: a0ffa885e neglected to use the VERBATIM form of
COMPLETE_WITH_QUERY, so it misbehaved for custom (qualified) GUC
names.
Mark Dilger and Tom Lane
Discussion: https://postgr.es/m/3118455.1649267333@sss.pgh.pa.us
|
