| Age | Commit message (Collapse) | Author |
|---|
|
To make this work, (1) makeJsonLexContextCstringLen now takes the
encoding to be used as an argument; (2) check_stack_depth() is made to
do nothing in frontend code, and (3) elog(ERROR, ...) is changed to
pg_log_fatal + exit in frontend code.
Mark Dilger, reviewed and slightly revised by me.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
|
|
The following changes make the predicate locking functions more
generic and suitable for use by future access methods:
- PredicateLockTuple() is renamed to PredicateLockTID(). It takes
ItemPointer and inserting transaction ID instead of HeapTuple.
- CheckForSerializableConflictIn() takes blocknum instead of buffer.
- CheckForSerializableConflictOut() no longer takes HeapTuple or buffer.
Author: Ashwin Agrawal
Reviewed-by: Andres Freund, Kuntal Ghosh, Thomas Munro
Discussion: https://postgr.es/m/CALfoeiv0k3hkEb3Oqk%3DziWqtyk2Jys1UOK5hwRBNeANT_yX%2Bng%40mail.gmail.com
|
|
Specifically, move those functions that depend on ereport()
from jsonapi.c to jsonfuncs.c, in preparation for allowing
jsonapi.c to be used from frontend code.
A few cases where elog(ERROR, ...) is used for can't-happen
conditions are left alone; we can handle those in some other
way in frontend code.
Reviewed by Mark Dilger and Andrew Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
|
|
Instead, it now returns a value indicating either success or the
type of error which occurred. The old behavior is still available
by calling pg_parse_json_or_ereport(). If the new interface is
used, an error can be thrown by passing the return value of
pg_parse_json() to json_ereport_error().
pg_parse_json() can still elog() in can't-happen cases, but it
seems like that issue is best handled separately.
Adjust json_lex() and json_count_array_elements() to return an
error code, too.
This is all in preparation for making the backend's json parser
available to frontend code.
Reviewed and/or tested by Mark Dilger and Andrew Dunstan.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
|
|
The signature of XLogReadRecord() required the caller to pass the starting
WAL position as argument, or InvalidXLogRecPtr to continue reading at the
end of previous record. That's slightly awkward to the callers, as most
of them don't want to randomly jump around in the WAL stream, but start
reading at one position and then read everything from that point onwards.
Remove the 'RecPtr' argument and add a new function XLogBeginRead() to
specify the starting position instead. That's more convenient for the
callers. Also, xlogreader holds state that is reset when you change the
starting position, so having a separate function for doing that feels like
a more natural fit.
This changes XLogFindNextRecord() function so that it doesn't reset the
xlogreader's state to what it was before the call anymore. Instead, it
positions the xlogreader to the found record, like XLogBeginRead().
Reviewed-by: Kyotaro Horiguchi, Alvaro Herrera
Discussion: https://www.postgresql.org/message-id/5382a7a3-debe-be31-c860-cb810c08f366%40iki.fi
|
|
Previously, it was possible for EXPLAIN ANALYZE of a parallel query
to produce several different "Workers" fields for a single plan node,
because different portions of explain.c independently generated
per-worker data and wrapped that output in separate fields. This
is pretty bogus, especially for the structured output formats: even
if it's not technically illegal, most programs would have a hard time
dealing with such data.
To improve matters, add infrastructure that allows redirecting
per-worker values into a side data structure, and then collect that
data into a single "Workers" field after we've finished running all
the relevant code for a given plan node.
There are a few visible side-effects:
* In text format, instead of something like
Sort Method: external merge Disk: 4920kB
Worker 0: Sort Method: external merge Disk: 5880kB
Worker 1: Sort Method: external merge Disk: 5920kB
Buffers: shared hit=682 read=10188, temp read=1415 written=2101
Worker 0: actual time=130.058..130.324 rows=1324 loops=1
Buffers: shared hit=337 read=3489, temp read=505 written=739
Worker 1: actual time=130.273..130.512 rows=1297 loops=1
Buffers: shared hit=345 read=3507, temp read=505 written=744
you get
Sort Method: external merge Disk: 4920kB
Buffers: shared hit=682 read=10188, temp read=1415 written=2101
Worker 0: actual time=130.058..130.324 rows=1324 loops=1
Sort Method: external merge Disk: 5880kB
Buffers: shared hit=337 read=3489, temp read=505 written=739
Worker 1: actual time=130.273..130.512 rows=1297 loops=1
Sort Method: external merge Disk: 5920kB
Buffers: shared hit=345 read=3507, temp read=505 written=744
* When JIT is enabled, any relevant per-worker JIT stats are attached
to the child node of the Gather or Gather Merge node, which is where
the other per-worker output has always been. Previously, that info
was attached directly to a Gather node, or missed entirely for Gather
Merge.
* A query's summary JIT data no longer includes a bogus
"Worker Number: -1" field.
A notable code-level change is that indenting for lines of text-format
output should now be handled by calling "ExplainIndentText(es)",
instead of hard-wiring how much space to emit. This seems a good deal
cleaner anyway.
This patch also adds a new "explain.sql" regression test script that's
dedicated to testing EXPLAIN. There is more that can be done in that
line, certainly, but for now it just adds some coverage of the XML and
YAML output formats, which had been completely untested.
Although this is surely a bug fix, it's not clear that people would
be happy with rearranging EXPLAIN output in a minor release, so apply
to HEAD only.
Maciek Sakrejda and Tom Lane, based on an idea of Andres Freund's;
reviewed by Georgios Kokolatos
Discussion: https://postgr.es/m/CAOtHd0AvAA8CLB9Xz0wnxu1U=zJCKrr1r4QwwXi_kcQsHDVU=Q@mail.gmail.com
|
|
These compute the greatest common divisor and least common multiple of
a pair of numbers using the Euclidean algorithm.
Vik Fearing, reviewed by Fabien Coelho.
Discussion: https://postgr.es/m/adbd3e0b-e3f1-5bbc-21db-03caf1cef0f7@2ndquadrant.com
|
|
Keep the code that pertains to the 'json' data type in json.c, but
move the lexing and parsing code to a new file jsonapi.c, a name
I chose because the corresponding prototypes are in jsonapi.h.
This seems like a logical division, because the JSON lexer and parser
are also used by the 'jsonb' data type, but the SQL-callable functions
in json.c are a separate thing. Also, the new jsonapi.c file needs to
include far fewer header files than json.c, which seems like a good
sign that this is an appropriate place to insert an abstraction
boundary. I took the opportunity to remove a few apparently-unneeded
includes from json.c at the same time.
Patch by me, reviewed by David Steele, Mark Dilger, and Andrew
Dunstan. The previous commit was, too, but I forgot to note it
in the commit message.
Discussion: http://postgr.es/m/CA+TgmoYfOXhd27MUDGioVh6QtpD0C1K-f6ObSA10AWiHBAL5bA@mail.gmail.com
|
|
The major change here is that we no longer include jsonb.h into
jsonapi.h. The reason that was necessary is that jsonapi.h included
several prototypes functions in jsonfuncs.c that depend on the Jsonb
type. Move those prototypes to a new header, jsonfuncs.h, and include
it where needed.
The other change is that JsonEncodeDateTime is now declared in
json.h rather than jsonapi.h.
Taken together, these steps eliminate all dependencies of jsonapi.h
on backend-only data types and header files, so that it can
potentially be included in frontend code.
|
|
This function allows us to fsync the specified file or directory.
It's useful, for example, when we want to sync the file that
pg_file_write() writes out or that COPY TO exports the data into,
for durability.
Author: Fujii Masao
Reviewed-By: Julien Rouhaud, Arthur Zakirov, Michael Paquier, Atsushi Torikoshi
Discussion: https://www.postgresql.org/message-id/CAHGQGwGY8uzZ_k8dHRoW1zDcy1Z7=5GQ+So4ZkVy2u=nLsk=hA@mail.gmail.com
|
|
I had supposed that all versions of Readline that have filename
quoting hooks also have the rl_completion_suppress_quote variable.
But it seems OpenBSD managed to find a version someplace that does
not, so we'll have to expend a separate configure probe for that.
(Light testing suggests that this version also lacks the bugs that
make it necessary to frob that variable. Hooray!)
Per buildfarm.
|
|
The Readline library contains a fair amount of knowledge about how to
tab-complete filenames, but it turns out that that doesn't work too well
unless we follow its expectation that we use its filename quoting hooks
to quote and de-quote filenames. We were trying to do such quote handling
within complete_from_files(), and that's still what we have to do if we're
using libedit, which lacks those hooks. But for Readline, it works a lot
better if we tell Readline that single-quote is a quoting character and
then provide hooks that know the details of the quoting rules for SQL
and psql meta-commands.
Hence, resurrect the quoting hook functions that existed in the original
version of tab-complete.c (and were disabled by commit f6689a328 because
they "didn't work so well yet"), and whack on them until they do seem to
work well.
Notably, this fixes bug #16059 from Steven Winfield, who pointed out
that the previous coding would strip quote marks from filenames in SQL
COPY commands, even though they're syntactically necessary there.
Now, we not only don't do that, but we'll add a quote mark when you
tab-complete, even if you didn't type one.
Getting this to work across a range of libedit versions (and, to a
lesser extent, libreadline versions) was depressingly difficult.
It will be interesting to see whether the new regression test cases
pass everywhere in the buildfarm.
Some future patch might try to handle quoted SQL identifiers with
similar explicit quoting/dequoting logic, but that's for another day.
Patch by me, reviewed by Peter Eisentraut.
Discussion: https://postgr.es/m/16059-8836946734c02b84@postgresql.org
|
|
This helps integration of extensions with Windows. The following
parameters are changed:
- idle_in_transaction_session_timeout (9.6 and newer versions)
- lock_timeout
- statement_timeout
- track_activities
- track_counts
- track_functions
Author: Pascal Legrand
Reviewed-by: Amit Kamila, Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/1579298868581-0.post@n3.nabble.com
Backpatch-through: 9.4
|
|
This feature allows the vacuum to leverage multiple CPUs in order to
process indexes. This enables us to perform index vacuuming and index
cleanup with background workers. This adds a PARALLEL option to VACUUM
command where the user can specify the number of workers that can be used
to perform the command which is limited by the number of indexes on a
table. Specifying zero as a number of workers will disable parallelism.
This option can't be used with the FULL option.
Each index is processed by at most one vacuum process. Therefore parallel
vacuum can be used when the table has at least two indexes.
The parallel degree is either specified by the user or determined based on
the number of indexes that the table has, and further limited by
max_parallel_maintenance_workers. The index can participate in parallel
vacuum iff it's size is greater than min_parallel_index_scan_size.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Robert Haas, Tomas Vondra,
Mahendra Singh and Sergei Kornilov
Tested-by: Mahendra Singh and Prabhat Sahu
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.com
https://postgr.es/m/CAA4eK1J-VoR9gzS5E75pcD-OH0mEyCdp8RihcwKrcuw7J-Q0+w@mail.gmail.com
|
|
The strategy of GIN index scan is driven by opclass-specific extract_query
method. This method that needed search mode is GIN_SEARCH_MODE_ALL. This
mode means that matching tuple may contain none of extracted entries. Simple
example is '!term' tsquery, which doesn't need any term to exist in matching
tsvector.
In order to handle such scan key GIN calculates virtual entry, which contains
all TIDs of all entries of attribute. In fact this is full scan of index
attribute. And typically this is very slow, but allows to handle some queries
correctly in GIN. However, current algorithm calculate such virtual entry for
each GIN_SEARCH_MODE_ALL scan key even if they are multiple for the same
attribute. This is clearly not optimal.
This commit improves the situation by introduction of "exclude only" scan keys.
Such scan keys are not capable to return set of matching TIDs. Instead, they
are capable only to filter TIDs produced by normal scan keys. Therefore,
each attribute should contain at least one normal scan key, while rest of them
may be "exclude only" if search mode is GIN_SEARCH_MODE_ALL.
The same optimization might be applied to the whole scan, not per-attribute.
But that leads to NULL values elimination problem. There is trade-off between
multiple possible ways to do this. We probably want to do this later using
some cost-based decision algorithm.
Discussion: https://postgr.es/m/CAOBaU_YGP5-BEt5Cc0%3DzMve92vocPzD%2BXiZgiZs1kjY0cj%3DXBg%40mail.gmail.com
Author: Nikita Glukhov, Alexander Korotkov, Tom Lane, Julien Rouhaud
Reviewed-by: Julien Rouhaud, Tomas Vondra, Tom Lane
|
|
Commit 9b63c13f0 turns out to have been fundamentally misguided:
the parent node's subPlan list is by no means the only way in which
a child SubPlan node can be hooked into the outer execution state.
As shown in bug #16213 from Matt Jibson, we can also get short-lived
tuple table slots added to the outer es_tupleTable list. At this point
I have little faith that there aren't other possible connections as
well; the long time it took to notice this problem shows that this
isn't a heavily-exercised situation.
Therefore, revert that fix, returning to the coding that passed a
NULL parent plan pointer down to the transiently-built subexpressions.
That gives us a pretty good guarantee that they won't hook into the
outer executor state in any way. But then we need some other solution
to make SubPlans work. Adopt the solution speculated about in the
previous commit's log message: do expression initialization at plan
startup for just those VALUES rows containing SubPlans, abandoning the
goal of reclaiming memory intra-query for those rows. In practice it
seems unlikely that queries containing a vast number of VALUES rows
would be using SubPlans in them, so this should not give up much.
(BTW, this test case also refutes my claim in connection with the prior
commit that the issue only arises with use of LATERAL. That was just
wrong: some variants of SubLink always produce SubPlans.)
As with previous patch, back-patch to all supported branches.
Discussion: https://postgr.es/m/16213-871ac3bc208ecf23@postgresql.org
|
|
... specifically, set it incrementally as each individual change is
spilled down to disk. This way, it is set correctly when the
transaction disappears without trace, ie. without leaving an XACT_ABORT
wal record. (This happens when the server crashes midway through a
transaction.)
Failing to have final_lsn prevents ReorderBufferRestoreCleanup() from
working, since it needs the final_lsn in order to know the endpoint of
its iteration through spilled files.
Commit df9f682c7bf8 already tried to fix the problem, but it didn't set
the final_lsn in all cases. Revert that, since it's no longer needed.
Author: Vignesh C
Reviewed-by: Amit Kapila, Dilip Kumar
Discussion: https://postgr.es/m/CALDaNm2CLk+K9JDwjYST0sPbGg5AQdvhUt0jbKyX_HdAE0jk3A@mail.gmail.com
|
|
|
|
jsonb_set_lax() is the same as jsonb_set, except that it takes and extra
argument that specifies what to do if the value argument is NULL. The
default is 'use_json_null'. Other possibilities are 'raise_exception',
'return_target' and 'delete_key', all these behaviours having been
suggested as reasonable by various users.
Discussion: https://postgr.es/m/375873e2-c957-3a8d-64f9-26c43c2b16e7@2ndQuadrant.com
Reviewed by: Pavel Stehule
|
|
Two routines have been added in OpenSSL 1.1.0 to set the protocol bounds
allowed within a given SSL context:
- SSL_CTX_set_min_proto_version
- SSL_CTX_set_max_proto_version
As Postgres supports OpenSSL down to 1.0.1 (as of HEAD), equivalent
replacements exist in the tree, which are only available for the
backend. A follow-up patch is planned to add control of the SSL
protocol bounds for libpq, so move those routines to src/common/ so as
libpq can use them.
Author: Daniel Gustafsson
Discussion: https://postgr.es/m/4F246AE3-A7AE-471E-BD3D-C799D3748E03@yesql.se
|
|
Move all the backend-only code that'd crept into wchar.c and encnames.c
into mbutils.c.
To remove the last few #ifdef dependencies from wchar.c and encnames.c,
also make the following changes:
* Adjust get_encoding_name_for_icu to return NULL, not throw an error,
for unsupported encodings. Its sole caller can perfectly well throw an
error instead. (While at it, I also made this function and its sibling
is_encoding_supported_by_icu proof against out-of-range encoding IDs.)
* Remove the overlength-name error condition from pg_char_to_encoding.
It's completely silly not to treat that just like any other
the-name-is-not-in-the-table case.
Also, get rid of pg_mic_mblen --- there's no obvious reason why
conv.c shouldn't call pg_mule_mblen instead.
Other than that, this is just code movement and comment-polishing with
no functional changes. Notably, I reordered declarations in pg_wchar.h
to show which functions are frontend-accessible and which are not.
Discussion: https://postgr.es/m/CA+TgmoYO8oq-iy8E02rD8eX25T-9SmyxKWqqks5OMHxKvGXpXQ@mail.gmail.com
|
|
Formerly, various frontend directories symlinked these two sources
and then built them locally. That's an ancient, ugly hack, and
we now have a much better way: put them into libpgcommon.
So do that. (The immediate motivation for this is the prospect
of having to introduce still more symlinking if we don't.)
This commit moves these two files absolutely verbatim, for ease of
reviewing the git history. There's some follow-on work to be done
that will modify them a bit.
Robert Haas, Tom Lane
Discussion: https://postgr.es/m/CA+TgmoYO8oq-iy8E02rD8eX25T-9SmyxKWqqks5OMHxKvGXpXQ@mail.gmail.com
|
|
Previously, check_xact_readonly() was responsible for determining
which types of queries could not be run in a read-only transaction,
standard_ProcessUtility() was responsibility for prohibiting things
which were allowed in read only transactions but not in recovery, and
utility commands were basically prohibited in bulk in parallel mode by
calls to CommandIsReadOnly() in functions.c and spi.c. This situation
was confusing and error-prone. Accordingly, move all the checks to a
new function ClassifyUtilityCommandAsReadOnly(), which determines the
degree to which a given statement is read only.
In the old code, check_xact_readonly() inadvertently failed to handle
several statement types that actually should have been prohibited,
specifically T_CreatePolicyStmt, T_AlterPolicyStmt, T_CreateAmStmt,
T_CreateStatsStmt, T_AlterStatsStmt, and T_AlterCollationStmt. As a
result, thes statements were erroneously allowed in read only
transactions, parallel queries, and standby operation. Generally, they
would fail anyway due to some lower-level error check, but we
shouldn't rely on that. In the new code structure, future omissions
of this type should cause ClassifyUtilityCommandAsReadOnly() to
complain about an unrecognized node type.
As a fringe benefit, this means we can allow certain types of utility
commands in parallel mode, where it's safe to do so. This allows
ALTER SYSTEM, CALL, DO, CHECKPOINT, COPY FROM, EXPLAIN, and SHOW.
It might be possible to allow additional commands with more work
and thought.
Along the way, document the thinking process behind the current set
of checks, as per discussion especially with Peter Eisentraut. There
is some interest in revising some of these rules, but that seems
like a job for another patch.
Patch by me, reviewed by Tom Lane, Stephen Frost, and Peter
Eisentraut.
Discussion: http://postgr.es/m/CA+TgmoZ_rLqJt5sYkvh+JpQnfX0Y+B2R+qfi820xNih6x-FQOQ@mail.gmail.com
|
|
We've had numerous bug reports about how (1) IF NOT EXISTS clauses in
ALTER TABLE don't behave as-expected, and (2) combining certain actions
into one ALTER TABLE doesn't work, though executing the same actions as
separate statements does. This patch cleans up all of the cases so far
reported from the field, though there are still some oddities associated
with identity columns.
The core problem behind all of these bugs is that we do parse analysis
of ALTER TABLE subcommands too soon, before starting execution of the
statement. The root of the bugs in group (1) is that parse analysis
schedules derived commands (such as a CREATE SEQUENCE for a serial
column) before it's known whether the IF NOT EXISTS clause should cause
a subcommand to be skipped. The root of the bugs in group (2) is that
earlier subcommands may change the catalog state that later subcommands
need to be parsed against.
Hence, postpone parse analysis of ALTER TABLE's subcommands, and do
that one subcommand at a time, during "phase 2" of ALTER TABLE which
is the phase that does catalog rewrites. Thus the catalog effects
of earlier subcommands are already visible when we analyze later ones.
(The sole exception is that we do parse analysis for ALTER COLUMN TYPE
subcommands during phase 1, so that their USING expressions can be
parsed against the table's original state, which is what we need.
Arguably, these bugs stem from falsely concluding that because ALTER
COLUMN TYPE must do early parse analysis, every other command subtype
can too.)
This means that ALTER TABLE itself must deal with execution of any
non-ALTER-TABLE derived statements that are generated by parse analysis.
Add a suitable entry point to utility.c to accept those recursive
calls, and create a struct to pass through the information needed by
the recursive call, rather than making the argument lists of
AlterTable() and friends even longer.
Getting this to work correctly required a little bit of fiddling
with the subcommand pass structure, in particular breaking up
AT_PASS_ADD_CONSTR into multiple passes. But otherwise it's mostly
a pretty straightforward application of the above ideas.
Fixing the residual issues for identity columns requires refactoring of
where the dependency link from an identity column to its sequence gets
set up. So that seems like suitable material for a separate patch,
especially since this one is pretty big already.
Discussion: https://postgr.es/m/10365.1558909428@sss.pgh.pa.us
|
|
This uses the progress reporting infrastructure added by c16dc1aca5e0,
adding support for ANALYZE.
Co-authored-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Co-authored-by: Tatsuro Yamada <tatsuro.yamada.tf@nttcom.co.jp>
Reviewed-by: Julien Rouhaud, Robert Haas, Anthony Nowocien, Kyotaro Horiguchi,
Vignesh C, Amit Langote
|
|
Introduce new fields amusemaintenanceworkmem and amparallelvacuumoptions
in IndexAmRoutine for parallel vacuum. The amusemaintenanceworkmem tells
whether a particular IndexAM uses maintenance_work_mem or not. This will
help in controlling the memory used by individual workers as otherwise,
each worker can consume memory equal to maintenance_work_mem. The
amparallelvacuumoptions tell whether a particular IndexAM participates in
a parallel vacuum and if so in which phase (bulkdelete, vacuumcleanup) of
vacuum.
Author: Masahiko Sawada and Amit Kapila
Reviewed-by: Dilip Kumar, Amit Kapila, Tomas Vondra and Robert Haas
Discussion:
https://postgr.es/m/CAD21AoDTPMgzSkV4E3SFo1CH_x50bf5PqZFQf4jmqjk-C03BWg@mail.gmail.com
https://postgr.es/m/CAA4eK1LmcD5aPogzwim5Nn58Ki+74a6Edghx4Wd8hAskvHaq5A@mail.gmail.com
|
|
If no permanent replication slot is configured using
primary_slot_name, the walreceiver now creates and uses a temporary
replication slot. A new setting wal_receiver_create_temp_slot can be
used to disable this behavior, for example, if the remote instance is
out of replication slots.
Reviewed-by: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/CA%2Bfd4k4dM0iEPLxyVyme2RAFsn8SUgrNtBJOu81YqTY4V%2BnqZA%40mail.gmail.com
|
|
This will be used by a subsequent patch.
Reviewed-by: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/CA%2Bfd4k4dM0iEPLxyVyme2RAFsn8SUgrNtBJOu81YqTY4V%2BnqZA%40mail.gmail.com
|
|
Add an ALTER TABLE subcommand for dropping the generated property from
a column, per SQL standard.
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Discussion: https://www.postgresql.org/message-id/flat/2f7f1d9c-946e-0453-d841-4f38eb9d69b6%402ndquadrant.com
|
|
Previously, the core scanner's yy_transition[] array had 37045 elements.
Since that number is larger than INT16_MAX, Flex generated the array to
contain 32-bit integers. By reimplementing some of the bulkier scanner
rules, this patch reduces the array to 20495 elements. The much smaller
total length, combined with the consequent use of 16-bit integers for
the array elements reduces the binary size by over 200kB. This was
accomplished in two ways:
1. Consolidate handling of quote continuations into a new start condition,
rather than duplicating that logic for five different string types.
2. Treat Unicode strings and identifiers followed by a UESCAPE sequence
as three separate tokens, rather than one. The logic to de-escape
Unicode strings is moved to the filter code in parser.c, which already
had the ability to provide special processing for token sequences.
While we could have implemented the conversion in the grammar, that
approach was rejected for performance and maintainability reasons.
Performance in microbenchmarks of raw parsing seems equal or slightly
faster in most cases, and it's reasonable to expect that in real-world
usage (with more competition for the CPU cache) there will be a larger
win. The exception is UESCAPE sequences; lexing those is about 10%
slower, primarily because the scanner now has to be called three times
rather than one. This seems acceptable since that feature is very
rarely used.
The psql and epcg lexers are likewise modified, primarily because we
want to keep them all in sync. Since those lexers don't use the
space-hogging -CF option, the space savings is much less, but it's
still good for perhaps 10kB apiece.
While at it, merge the ecpg lexer's handling of C-style comments used
in SQL and in C. Those have different rules regarding nested comments,
but since we already have the ability to keep track of the previous
start condition, we can use that to handle both cases within a single
start condition. This matches the core scanner more closely.
John Naylor
Discussion: https://postgr.es/m/CACPNZCvaoa3EgVWm5yZhcSTX6RAtaLgniCPcBVOCwm8h3xpWkw@mail.gmail.com
|
|
Reported-by: Antonin Houska
Author: Antonin Houska
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/2246.1578900133@antos
|
|
Replace the solitary use with a bool.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://www.postgresql.org/message-id/flat/a6f91ead-0ce4-2a34-062b-7ab9813ea308%402ndquadrant.com
|
|
Author: Peter Geoghegan
Reviewed-By: Heikki Linnakangas
|
|
Author: Peter Geoghegan
Reviewed-By: Heikki Linnakangas
|
|
This simplifies addition of further flags.
Author: Nikhil Sontakke
Discussion: https://postgr.es/m/CAMGcDxeViP+R-OL7QhzUV9eKCVjURobuY1Zijik4Ay_Ddwo4Cg@mail.gmail.com
|
|
The core idea of this patch is to make the parser generate join alias
Vars (that is, ones with varno pointing to a JOIN RTE) only when the
alias Var is actually different from any raw join input, that is a type
coercion and/or COALESCE is necessary to generate the join output value.
Otherwise just generate varno/varattno pointing to the relevant join
input column.
In effect, this means that the planner's flatten_join_alias_vars()
transformation is already done in the parser, for all cases except
(a) columns that are merged by JOIN USING and are transformed in the
process, and (b) whole-row join Vars. In principle that would allow
us to skip doing flatten_join_alias_vars() in many more queries than
we do now, but we don't have quite enough infrastructure to know that
we can do so --- in particular there's no cheap way to know whether
there are any whole-row join Vars. I'm not sure if it's worth the
trouble to add a Query-level flag for that, and in any case it seems
like fit material for a separate patch. But even without skipping the
work entirely, this should make flatten_join_alias_vars() faster,
particularly where there are nested joins that it previously had to
flatten recursively.
An essential part of this change is to replace Var nodes'
varnoold/varoattno fields with varnosyn/varattnosyn, which have
considerably more tightly-defined meanings than the old fields: when
they differ from varno/varattno, they identify the Var's position in
an aliased JOIN RTE, and the join alias is what ruleutils.c should
print for the Var. This is necessary because the varno change
destroyed ruleutils.c's ability to find the JOIN RTE from the Var's
varno.
Another way in which this change broke ruleutils.c is that it's no
longer feasible to determine, from a JOIN RTE's joinaliasvars list,
which join columns correspond to which columns of the join's immediate
input relations. (If those are sub-joins, the joinaliasvars entries
may point to columns of their base relations, not the sub-joins.)
But that was a horrid mess requiring a lot of fragile assumptions
already, so let's just bite the bullet and add some more JOIN RTE
fields to make it more straightforward to figure that out. I added
two integer-List fields containing the relevant column numbers from
the left and right input rels, plus a count of how many merged columns
there are.
This patch depends on the ParseNamespaceColumn infrastructure that
I added in commit 5815696bc. The biggest bit of code change is
restructuring transformFromClauseItem's handling of JOINs so that
the ParseNamespaceColumn data is propagated upward correctly.
Other than that and the ruleutils fixes, everything pretty much
just works, though some processing is now inessential. I grabbed
two pieces of low-hanging fruit in that line:
1. In find_expr_references, we don't need to recurse into join alias
Vars anymore. There aren't any except for references to merged USING
columns, which are more properly handled when we scan the join's RTE.
This change actually fixes an edge-case issue: we will now record a
dependency on any type-coercion function present in a USING column's
joinaliasvar, even if that join column has no references in the query
text. The odds of the missing dependency causing a problem seem quite
small: you'd have to posit somebody dropping an implicit cast between
two data types, without removing the types themselves, and then having
a stored rule containing a whole-row Var for a join whose USING merge
depends on that cast. So I don't feel a great need to change this in
the back branches. But in theory this way is more correct.
2. markRTEForSelectPriv and markTargetListOrigin don't need to recurse
into join alias Vars either, because the cases they care about don't
apply to alias Vars for USING columns that are semantically distinct
from the underlying columns. This removes the only case in which
markVarForSelectPriv could be called with NULL for the RTE, so adjust
the comments to describe that hack as being strictly internal to
markRTEForSelectPriv.
catversion bump required due to changes in stored rules.
Discussion: https://postgr.es/m/7115.1577986646@sss.pgh.pa.us
|
|
This tells you about allocations that have been made from the main
shared memory segment. The original patch also tried to show information
about dynamic shared memory allocation as well, but I decided to
leave that problem for another time.
Andres Freund and Robert Haas, reviewed by Michael Paquier, Marti
Raudsepp, Tom Lane, Álvaro Herrera, and Kyotaro Horiguchi.
Discussion: http://postgr.es/m/20140504114417.GM12715@awork2.anarazel.de
|
|
Per the buildfarm, via Michael Paquier.
Discussion: http://postgr.es/m/20200108032648.GE3413@paquier.xyz
|
|
We currently have several sets of files generated from data provided
by Unicode. These all have ad hoc rules and instructions for updating
when new Unicode versions appear, and it's not done consistently.
This patch centralizes and automates the process and makes it part of
the release checklist. The Unicode and CLDR versions are specified in
Makefile.global.in. There is a new make target "update-unicode" that
downloads all the relevant files and runs the generation script.
There is also a new script for generating the table of combining
characters for ucs_wcwidth(). That table is now in a separate include
file rather than hardcoded into the middle of other code. This is
based on the script that was used for generating
d8594d123c155aeecd47fc2450f62f5100b2fbf0, but the script itself wasn't
committed at that time.
Reviewed-by: John Naylor <john.naylor@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c8d05f42-443e-6c23-819b-05b31759a37c@2ndquadrant.com
|
|
Use the parser's standard type coercion machinery to convert the
output column(s) of a SQL function's final SELECT or RETURNING
to the type(s) they should have according to the function's declared
result type. We'll allow any case where an assignment-level
coercion is available. Previously, we failed unless the required
coercion was a binary-compatible one (and the documentation ignored
this, falsely claiming that the types must match exactly).
Notably, the coercion now accounts for typmods, so that cases where
a SQL function is declared to return a composite type whose columns
are typmod-constrained now behave as one would expect. Arguably
this aspect is a bug fix, but the overall behavioral change here
seems too large to consider back-patching.
A nice side-effect is that functions can now be inlined in a
few cases where we previously failed to do so because of type
mismatches.
Discussion: https://postgr.es/m/18929.1574895430@sss.pgh.pa.us
|
|
Instead of always calling heap_fetch_toast_slice during detoasting,
invoke a table AM callback which, when the toast table is a heap
table, will be heap_fetch_toast_slice.
This makes it possible for a table AM other than heap to be used
as a TOAST table. It also completes the series of commits intended
to improve the interaction of tableam with TOAST that began with
commit 8b94dab06617ef80a0901ab103ebd8754427ef5a; detoast.c is
now, hopefully, fully AM-independent.
Patch by me, reviewed by Andres Freund and Peter Eisentraut.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
|
|
Previously, the toast table had to be implemented by the same AM that
was used for the main table, which was bad, because the detoasting
code won't work with anything but heap. This commit doesn't fix the
latter problem, although there's another patch coming which does,
but it does let you pick something that works (i.e. heap, right now).
Patch by me, reviewed by Andres Freund.
Discussion: http://postgr.es/m/CA+TgmoZv-=2iWM4jcw5ZhJeL18HF96+W1yJeYrnGMYdkFFnEpQ@mail.gmail.com
|
|
These allow better control of trailing zeroes in numeric values.
Pavel Stehule, based on an old proposal of Marko Tiikkaja's;
review by Karl Pinc
Discussion: https://postgr.es/m/CAFj8pRDjs-navGASeF0Wk74N36YGFJ+v=Ok9_knRa7vDc-qugg@mail.gmail.com
|
|
It has undefined behavior. Follow the precedent of commit
9a9473f3cce1a21c25d6cc7569710e832d2b180b. No back-patch, since the
master branch alone has this function.
Discussion: https://postgr.es/m/20191229070221.GA13873@gust.leadboat.com
|
|
Pass ParseState into the functions called from
standard_ProcessUtility() instead passing the query string and query
environment separately. No functionality change, but it makes the
notation consistent. We had already started moving things into
that direction piece by piece, and this completes it.
Reviewed-by: Pavel Stehule <pavel.stehule@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/6e7aa4a1-be6a-1a75-b1f9-83a678e5184a@2ndquadrant.com
|
|
Commit 558a9165e08 taught _bt_delitems_delete() to produce its own XID
horizon on the primary. Standbys no longer needed to generate their own
latestRemovedXid, since they could just use the explicitly logged value
from the primary instead. The deleted offset numbers array from the
xl_btree_delete WAL record was no longer used by the REDO routine for
anything other than deleting the items.
This enables a minor optimization: We now treat the array as buffer
state, not generic WAL data, following _bt_delitems_vacuum()'s example.
This should be a minor win, since it allows us to avoid including the
deleted items array in cases where XLogInsert() stores the whole buffer
anyway. The primary goal here is to make the code more maintainable,
though. Removing inessential differences between the two functions
highlights the fundamental differences that remain.
Also change xl_btree_delete to use uint32 for the size of the array of
item offsets being deleted. This brings xl_btree_delete closer to
xl_btree_vacuum. Furthermore, it seems like a good idea to use an
explicit-width integer type (the field was previously an "int").
Bump XLOG_PAGE_MAGIC because xl_btree_delete changed.
Discussion: https://postgr.es/m/CAH2-Wzkz4TjmezzfAbaV1zYrh=fr0bCpzuJTvBe5iUQ3aUPsCQ@mail.gmail.com
|
|
Make the function prototype order consistent with the definition order
in nbtpage.c.
|
|
When I added the ParseNamespaceItem data structure (in commit 5ebaaa494),
it wasn't very tightly integrated into the parser's APIs. In the wake of
adding p_rtindex to that struct (commit b541e9acc), there is a good reason
to make more use of it: by passing around ParseNamespaceItem pointers
instead of bare RTE pointers, we can get rid of various messy methods for
passing back or deducing the rangetable index of an RTE during parsing.
Hence, refactor the addRangeTableEntryXXX functions to build and return
a ParseNamespaceItem struct, not just the RTE proper; and replace
addRTEtoQuery with addNSItemToQuery, which is passed a ParseNamespaceItem
rather than building one internally.
Also, add per-column data (a ParseNamespaceColumn array) to each
ParseNamespaceItem. These arrays are built during addRangeTableEntryXXX,
where we have column type data at hand so that it's nearly free to fill
the data structure. Later, when we need to build Vars referencing RTEs,
we can use the ParseNamespaceColumn info to avoid the rather expensive
operations done in get_rte_attribute_type() or expandRTE().
get_rte_attribute_type() is indeed dead code now, so I've removed it.
This makes for a useful improvement in parse analysis speed, around 20%
in one moderately-complex test query.
The ParseNamespaceColumn structs also include Var identity information
(varno/varattno). That info isn't actually being used in this patch,
except that p_varno == 0 is a handy test for a dropped column.
A follow-on patch will make more use of it.
Discussion: https://postgr.es/m/2461.1577764221@sss.pgh.pa.us
|
|
Backpatch-through: update all files in master, backpatch legal files through 9.4
|
|
This follows multiple complains from Peter Geoghegan, Andres Freund and
Alvaro Herrera that this issue ought to be dug more before actually
happening, if it happens.
Discussion: https://postgr.es/m/20191226144606.GA5659@alvherre.pgsql
|
