| Age | Commit message (Collapse) | Author |
|---|
|
A deadlock can occur when the DDL command and the apply worker acquire
catalog locks in different orders while dropping replication origins.
The issue is rare in PG16 and higher branches because, in most cases, the
tablesync worker performs the origin drop in those branches, and its
locking sequence does not conflict with DDL operations.
This patch ensures consistent lock acquisition to prevent such deadlocks.
As per buildfarm.
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Author: Ajin Cherian <itsajin@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: vignesh C <vignesh21@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/bab95e12-6cc5-4ebb-80a8-3e41956aa297@gmail.com
|
|
Solaris has never bothered to add "const" to the second argument
of PAM conversation procs, as all other Unixen did decades ago.
This resulted in an "incompatible pointer" compiler warning when
building --with-pam, but had no more serious effect than that,
so we never did anything about it. However, as of GCC 14 the
case is an error not warning by default.
To complicate matters, recent OpenIndiana (and maybe illumos
in general?) *does* supply the "const" by default, so we can't
just assume that platforms using our solaris template need help.
What we can do, short of building a configure-time probe,
is to make solaris.h #define _PAM_LEGACY_NONCONST, which
causes OpenIndiana's pam_appl.h to revert to the traditional
definition, and hopefully will have no effect anywhere else.
Then we can use that same symbol to control whether we include
"const" in the declaration of pam_passwd_conv_proc().
Bug: #18995
Reported-by: Andrew Watkins <awatkins1966@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/18995-82058da9ab4337a7@postgresql.org
Backpatch-through: 13
|
|
Commit 7a7b3e11e61 added the ii_NullsNotDistinct field, but the
comment was not updated.
Author: Japin Li <japinli@hotmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/ME0P300MB04453E6C7EA635F0ECF41BFCB6832%40ME0P300MB0445.AUSP300.PROD.OUTLOOK.COM
|
|
logical decoding.
Commit 4909b38af0 introduced logic to distribute invalidation messages
from catalog-modifying transactions to all concurrent in-progress
transactions. However, since each transaction distributes not only its
original invalidation messages but also previously distributed
messages to other transactions, this leads to an exponential increase
in allocation request size for invalidation messages, ultimately
causing memory allocation failure.
This commit fixes this issue by tracking distributed invalidation
messages separately per decoded transaction and not redistributing
these messages to other in-progress transactions. The maximum size of
distributed invalidation messages that one transaction can store is
limited to MAX_DISTR_INVAL_MSG_PER_TXN (8MB). Once the size of the
distributed invalidation messages exceeds this threshold, we
invalidate all caches in locations where distributed invalidation
messages need to be executed.
Back-patch to all supported versions where we introduced the fix by
commit 4909b38af0.
Note that this commit adds two new fields to ReorderBufferTXN to store
the distributed transactions. This change breaks ABI compatibility in
back branches, affecting third-party extensions that depend on the
size of the ReorderBufferTXN struct, though this scenario seems
unlikely.
Additionally, it adds a new flag to the txn_flags field of
ReorderBufferTXN to indicate distributed invalidation message
overflow. This should not affect existing implementations, as it is
unlikely that third-party extensions use unused bits in the txn_flags
field.
Bug: #18938 #18942
Author: vignesh C <vignesh21@gmail.com>
Reported-by: Duncan Sands <duncan.sands@deepbluecap.com>
Reported-by: John Hutchins <john.hutchins@wicourts.gov>
Reported-by: Laurence Parry <greenreaper@hotmail.com>
Reported-by: Max Madden <maxmmadden@gmail.com>
Reported-by: Braulio Fdo Gonzalez <brauliofg@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Discussion: https://postgr.es/m/680bdaf6-f7d1-4536-b580-05c2760c67c6@deepbluecap.com
Discussion: https://postgr.es/m/18942-0ab1e5ae156613ad@postgresql.org
Discussion: https://postgr.es/m/18938-57c9a1c463b68ce0@postgresql.org
Discussion: https://postgr.es/m/CAD1FGCT2sYrP_70RTuo56QTizyc+J3wJdtn2gtO3VttQFpdMZg@mail.gmail.com
Discussion: https://postgr.es/m/CANO2=B=2BT1hSYCE=nuuTnVTnjidMg0+-FfnRnqM6kd23qoygg@mail.gmail.com
Backpatch-through: 13
|
|
Per the letter of the C11 standard, one must #define
__STDC_WANT_LIB_EXT1__ as 1 before including <string.h> in order to
have access to memset_s(). It appears that many platforms are lenient
about this, because we weren't doing it and yet the code appeared to
work anyway. But we now find that with -std=c11, macOS is strict and
doesn't declare memset_s, leading to compile failures since we try to
use it anyway. (Given the lack of prior reports, perhaps this is new
behavior in the latest SDK? No matter, we're clearly in the wrong.)
In addition to the immediate problem, which could be fixed merely by
adding the needed #define to explicit_bzero.c, it seems possible that
our configure-time probe for memset_s() could fail in case a platform
implements the function in some odd way due to this spec requirement.
This concern can be fixed in largely the same way that we dealt with
strchrnul() in 6da2ba1d8: switch to using a declaration-based
configure probe instead of a does-it-link probe.
Back-patch to v13 where we started using memset_s().
Reported-by: Lakshmi Narayana Velayudam <dev.narayana.v@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CAA4pTnLcKGG78xeOjiBr5yS7ZeE-Rh=FaFQQGOO=nPzA1L8yEA@mail.gmail.com
Backpatch-through: 13
|
|
The previous commit assumed we have a configure probe for
SSL_CTX_set_cert_cb. v15 lacks that, so add it now.
(Details borrowed from 36f40ce2d.)
Reported-by: Thomas Munro <thomas.munro@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CA+hUKG+fLqyweHqFSBcErueUVT0vDuSNWui-ySz3+d_APmq7dw@mail.gmail.com
Backpatch-through: 15 only
|
|
With GB18030 as source encoding, applications could crash the server via
SQL functions convert() or convert_from(). Applications themselves
could crash after passing unterminated GB18030 input to libpq functions
PQescapeLiteral(), PQescapeIdentifier(), PQescapeStringConn(), or
PQescapeString(). Extension code could crash by passing unterminated
GB18030 input to jsonapi.h functions. All those functions have been
intended to handle untrusted, unterminated input safely.
A crash required allocating the input such that the last byte of the
allocation was the last byte of a virtual memory page. Some malloc()
implementations take measures against that, making the SIGSEGV hard to
reach. Back-patch to v13 (all supported versions).
Author: Noah Misch <noah@leadboat.com>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Backpatch-through: 13
Security: CVE-2025-4207
|
|
synchronous_standby_names cannot be reloaded safely by backends, and the
checkpointer is in charge of updating a state in shared memory if the
GUC is enabled in WalSndCtl, to let the backends know if they should
wait or not for a given LSN. This provides a strict control on the
timing of the waiting queues if the GUC is enabled or disabled, then
reloaded. The checkpointer is also in charge of waking up the backends
that could be waiting for a LSN when the GUC is disabled.
This logic had a race condition at startup, where it would be possible
for backends to not wait for a LSN even if synchronous_standby_names is
enabled. This would cause visibility issues with transactions that we
should be waiting for but they were not. The problem lasts until the
checkpointer does its initial update of the shared memory state when it
loads synchronous_standby_names.
In order to take care of this problem, the shared memory state in
WalSndCtl is extended to detect if it has been initialized by the
checkpointer, and not only check if synchronous_standby_names is
defined. In WalSndCtlData, sync_standbys_defined is renamed to
sync_standbys_status, a bits8 able to know about two states:
- If the shared memory state has been initialized. This flag is set by
the checkpointer at startup once, and never removed.
- If synchronous_standby_names is known as defined in the shared memory
state. This is the same as the previous sync_standbys_defined in
WalSndCtl.
This method gives a way for backends to decide what they should do until
the shared memory area is initialized, and they now ultimately fall back
to a check on the GUC value in this case, which is the best thing that
can be done.
Fortunately, SyncRepUpdateSyncStandbysDefined() is called immediately by
the checkpointer when this process starts, so the window is very narrow.
It is possible to enlarge the problematic window by making the
checkpointer wait at the beginning of SyncRepUpdateSyncStandbysDefined()
with a hardcoded sleep for example, and doing so has showed that a 2PC
visibility test is indeed failing. On machines slow enough, this bug
would cause spurious failures.
In 17~, we have looked at the possibility of adding an injection point
to have a reproducible test, but as the problematic window happens at
early startup, we would need to invent a way to make an injection point
optionally persistent across restarts when attached, something that
would be fine for this case as it would involve the checkpointer. This
issue is quite old, and can be reproduced on all the stable branches.
Author: Melnikov Maksim <m.melnikov@postgrespro.ru>
Co-authored-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/163fcbec-900b-4b07-beaa-d2ead8634bec@postgrespro.ru
Backpatch-through: 13
|
|
Data loss can happen when the DDLs like ALTER PUBLICATION ... ADD TABLE ...
or ALTER TYPE ... that don't take a strong lock on table happens
concurrently to DMLs on the tables involved in the DDL. This happens
because logical decoding doesn't distribute invalidations to concurrent
transactions and those transactions use stale cache data to decode the
changes. The problem becomes bigger because we keep using the stale cache
even after those in-progress transactions are finished and skip the
changes required to be sent to the client.
This commit fixes the issue by distributing invalidation messages from
catalog-modifying transactions to all concurrent in-progress transactions.
This allows the necessary rebuild of the catalog cache when decoding new
changes after concurrent DDL.
We observed performance regression primarily during frequent execution of
*publication DDL* statements that modify the published tables. The
regression is minor or nearly nonexistent for DDLs that do not affect the
published tables or occur infrequently, making this a worthwhile cost to
resolve a longstanding data loss issue.
An alternative approach considered was to take a strong lock on each
affected table during publication modification. However, this would only
address issues related to publication DDLs (but not the ALTER TYPE ...)
and require locking every relation in the database for publications
created as FOR ALL TABLES, which is impractical.
The bug exists in all supported branches, but we are backpatching till 14.
The fix for 13 requires somewhat bigger changes than this fix, so the fix
for that branch is still under discussion.
Reported-by: hubert depesz lubaczewski <depesz@depesz.com>
Reported-by: Tomas Vondra <tomas.vondra@enterprisedb.com>
Author: Shlok Kyal <shlok.kyal.oss@gmail.com>
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Zhijie Hou <houzj.fnst@fujitsu.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Tested-by: Benoit Lobréau <benoit.lobreau@dalibo.com>
Backpatch-through: 14
Discussion: https://postgr.es/m/de52b282-1166-1180-45a2-8d8917ca74c6@enterprisedb.com
Discussion: https://postgr.es/m/CAD21AoAenVqiMjpN-PvGHL1N9DWnHSq673bfgr6phmBUzx=kLQ@mail.gmail.com
|
|
This replaces dblink's blocking libpq calls, allowing cancellation and
allowing DROP DATABASE (of a database not involved in the query). Apart
from explicit dblink_cancel_query() calls, dblink still doesn't cancel
the remote side. The replacement for the blocking calls consists of
new, general-purpose query execution wrappers in the libpqsrv facility.
Out-of-tree extensions should adopt these.
The original commit d3c5f37dd543498cc7c678815d3921823beec9e9 did not
back-patch. Back-patch now to v16-v13, bringing coverage to all supported
versions. This back-patch omits the orignal's refactoring in postgres_fdw.
Discussion: https://postgr.es/m/20231122012945.74@rfd.leadboat.com
|
|
Currently dblink and postgres_fdw don't process interrupts during connection
establishment. Besides preventing query cancellations etc, this can lead to
undetected deadlocks, as global barriers are not processed.
Libpqwalreceiver in contrast, processes interrupts during connection
establishment. The required code is not trivial, so duplicating it into
additional places does not seem like a good option.
These aforementioned undetected deadlocks are the reason for the spate of CI
test failures in the FreeBSD 'test_running' step.
For now the helper library is just a header, as it needs to be linked into
each extension using libpq, and it seems too small to be worth adding a
dedicated static library for.
The conversion to the helper are done in subsequent commits.
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20220925232237.p6uskba2dw6fnwj2@awork3.anarazel.de
|
|
As of 15.4, macOS has strchrnul(), but access to it is blocked behind
a check for MACOSX_DEPLOYMENT_TARGET >= 15.4. But our does-it-link
configure check finds it, so we try to use it, and fail with the
present default deployment target (namely 15.0). This accounts for
today's buildfarm failures on indri and sifaka.
This is the identical problem that we faced some years ago when Apple
introduced preadv and pwritev in the same way. We solved that in
commit f014b1b9b by using AC_CHECK_DECLS instead of AC_CHECK_FUNCS
to check the functions' availability. So do the same now for
strchrnul(). Interestingly, we already had a workaround for
"the link check doesn't agree with <string.h>" cases with glibc,
which we no longer need since only the header declaration is being
checked.
Testing this revealed that the meson version of this check has never
worked, because it failed to use "-Werror=unguarded-availability-new".
(Apparently nobody's tried to build with meson on macOS versions that
lack preadv/pwritev as standard.) Adjust that while at it. Also,
we had never put support for "-Werror=unguarded-availability-new"
into v13, but we need that now.
Co-authored-by: Tom Lane <tgl@sss.pgh.pa.us>
Co-authored-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/385134.1743523038@sss.pgh.pa.us
Backpatch-through: 13
|
|
Letting the rewriter keep RangeTblEntry.relid when expanding a view
RTE, without making the outfuncs/readfuncs changes that went along
with that originally, is more problematic than I realized. It causes
WRITE_READ_PARSE_PLAN_TREES testing to fail because outfuncs/readfuncs
don't think relid need be saved in an RTE_SUBQUERY RTE.
There doesn't seem to be any other good route to fixing the whole-row
Var problem solved at f4e7756ef, so we just have to deal with the
consequences. We can make the eventually-produced plan tree safe
for WRITE_READ_PARSE_PLAN_TREES by clearing the relid field at the
end of planning, as was already being done for the functions field.
(The functions field is not problematic here because our abuse of it
is strictly local to the planner.) However, there is no nice fix for
the post-rewrite WRITE_READ_PARSE_PLAN_TREES test.
The solution adopted here is to remove the post-rewrite test in the
affected branches. That's surely less than ideal, but a couple of
arguments can be made why it's not unacceptable. First, the behavior
of outfuncs/readfuncs for parsetrees in these branches is frozen no
matter what, because of catalog stability requirements. So we're not
testing anything that is going to change. Second, testing
WRITE_READ_PARSE_PLAN_TREES at this particular time doesn't correspond
to any direct system functionality requirement, neither rule storage
nor plan transmission.
Reported-by: Andres Freund <andres@anarazel.de>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/3518c50a-ab18-482f-b916-a37263622501@deepbluecap.com
Backpatch-through: 13-15
|
|
When the rewriter converts an RTE_RELATION RTE for a view into
an RTE_SUBQUERY RTE containing the view's defining query, leave
the relid field alone instead of zeroing it. This allows the
planner to tell that the subquery came from a view rather than
having been written in-line, which is needed to support an
upcoming planner bug fix. We cannot change the behavior of the
outfuncs/readfuncs code in released branches, so the relid field
will not survive in plans passed to parallel workers; therefore
this info should not be relied on in the executor.
This back-patches a portion of the data structure definitional
changes made in v16 and up by commit 47bb9db75. It's being
committed separately for visibility in the commit log, but
with luck it will not actually matter to anyone. While it's
not inconceivable that this change will break code expecting
relid to be zero in a subquery RTE, we can hope that such code
has already been adjusted to cope with v16 and up.
Reported-by: Duncan Sands <duncan.sands@deepbluecap.com>
Diagnosed-by: Tender Wang <tndrwang@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Dean Rasheed <dean.a.rasheed@gmail.com>
Discussion: https://postgr.es/m/3518c50a-ab18-482f-b916-a37263622501@deepbluecap.com
Backpatch-through: 13-15
|
|
If a domain type has a default, adding a column of that type (without
any explicit DEFAULT clause) failed to install the domain's default
value in existing rows, instead leaving the new column null. This
is unexpected, and it used to work correctly before v11. The cause
is confusion in the atthasmissing mechanism about which default value
to install: we'd only consider installing an explicitly-specified
default, and then we'd decide that no table rewrite is needed.
To fix, take the responsibility for filling attmissingval out of
StoreAttrDefault, and instead put it into ATExecAddColumn's existing
logic that derives the correct value to fill the new column with.
Also, centralize the logic that determines the need for
default-related table rewriting there, instead of spreading it over
four or five places.
In the back branches, we'll leave the attmissingval-filling code
in StoreAttrDefault even though it's now dead, for fear that some
extension may be depending on that functionality to exist there.
A separate HEAD-only patch will clean up the now-useless code.
Reported-by: jian he <jian.universality@gmail.com>
Author: jian he <jian.universality@gmail.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CACJufxHFssPvkP1we7WMhPD_1kwgbG52o=kQgL+TnVoX5LOyCQ@mail.gmail.com
Backpatch-through: 13
|
|
This commit adds fmtIdEnc() and fmtQualifiedIdEnc(), which allow to specify
the encoding as an explicit argument. Additionally setFmtEncoding() is
provided, which defines the encoding when no explicit encoding is provided, to
avoid breaking all code using fmtId().
All users of fmtId()/fmtQualifiedId() are either converted to the explicit
version or a call to setFmtEncoding() has been added.
This commit does not yet utilize the now well-defined encoding, that will
happen in a subsequent commit.
Reviewed-by: Noah Misch <noah@leadboat.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Backpatch-through: 13
Security: CVE-2025-1094
|
|
There are cases where we cannot / do not want to error out for invalidly
encoded input. In such cases it can be useful to replace e.g. an incomplete
multi-byte characters with bytes that will trigger an error when getting
validated as part of a larger string.
Unfortunately, until now, for some encoding no such sequence existed. For
those encodings this commit removes one previously accepted input combination
- we consider that to be ok, as the chosen bytes are outside of the valid
ranges for the encodings, we just previously failed to detect that.
As we cannot add a new field to pg_wchar_table without breaking ABI, this is
implemented "in-line" in the newly added function.
Author: Noah Misch <noah@leadboat.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Backpatch-through: 13
Security: CVE-2025-1094
|
|
If a column is omitted in an INSERT, and there's no column default,
the code in preptlist.c generates a NULL Const to be inserted.
Furthermore, if the column is of a domain type, we wrap the Const
in CoerceToDomain, so as to throw a run-time error if the domain
has a NOT NULL constraint. That's fine as far as it goes, but
there are two problems:
1. We're being sloppy about the type/typmod that the Const is
labeled with. It really should have the domain's base type/typmod,
since it's the input to CoerceToDomain not the output. This can
result in coerce_to_domain inserting a useless length-coercion
function (useless because it's being applied to a null). The
coercion would typically get const-folded away later, but it'd
be better not to create it in the first place.
2. We're not applying expression preprocessing (specifically,
eval_const_expressions) to the resulting expression tree.
The planner's primary expression-preprocessing pass already happened,
so that means the length coercion step and CoerceToDomain node miss
preprocessing altogether.
This is at the least inefficient, since it means the length coercion
and CoerceToDomain will actually be executed for each inserted row,
though they could be const-folded away in most cases. Worse, it
seems possible that missing preprocessing for the length coercion
could result in an invalid plan (for example, due to failing to
perform default-function-argument insertion). I'm not aware of
any live bug of that sort with core datatypes, and it might be
unreachable for extension types as well because of restrictions of
CREATE CAST, but I'm not entirely convinced that it's unreachable.
Hence, it seems worth back-patching the fix (although I only went
back to v14, as the patch doesn't apply cleanly at all in v13).
There are several places in the rewriter that are building null
domain constants the same way as preptlist.c. While those are
before the planner and hence don't have any reachable bug, they're
still applying a length coercion that will be const-folded away
later, uselessly wasting cycles. Hence, make a utility routine
that all of these places can call to do it right.
Making this code more careful about the typmod assigned to the
generated NULL constant has visible but cosmetic effects on some
of the plans shown in contrib/postgres_fdw's regression tests.
Discussion: https://postgr.es/m/1865579.1738113656@sss.pgh.pa.us
Backpatch-through: 14
|
|
When running on Windows, canonicalize_path() converts '\' to '/'
to prevent confusing the Windows command processor. It was
doing that in a non-encoding-aware fashion; but in SJIS there
are valid two-byte characters whose second byte matches '\'.
So encoding corruption ensues if such a character is used in
the path.
We can fairly easily fix this if we know which encoding is
in use, but a lot of our utilities don't have much of a clue
about that. After some discussion we decided we'd settle for
fixing this only in psql, and assuming that its value of
client_encoding matches what the user is typing.
It seems hopeless to get the server to deal with the problematic
characters in database path names, so we'll just declare that
case to be unsupported. That means nothing need be done in
the server, nor in utility programs whose only contact with
file path names is for database paths. But psql frequently
deals with client-side file paths, so it'd be good if it
didn't mess those up.
Bug: #18735
Reported-by: Koichi Suzuki <koichi.suzuki@enterprisedb.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Koichi Suzuki <koichi.suzuki@enterprisedb.com>
Discussion: https://postgr.es/m/18735-4acdb3998bb9f2b1@postgresql.org
Backpatch-through: 13
|
|
The right mix of DDL and VACUUM could corrupt a catalog page header such
that PageIsVerified() durably fails, requiring a restore from backup.
This affects only catalogs that both have a syscache and have DDL code
that uses syscache tuples to construct updates. One of the test
permutations shows a variant not yet fixed.
This makes !TransactionIdIsValid(TM_FailureData.xmax) possible with
TM_Deleted. I think core and PGXN are indifferent to that.
Per bug #17821 from Alexander Lakhin. Back-patch to v13 (all supported
versions). The test case is v17+, since it uses INJECTION_POINT.
Discussion: https://postgr.es/m/17821-dd8c334263399284@postgresql.org
|
|
The freshly-released 2025a version of tzdata has a refined estimate
for the longitude of Manila, changing their value for LMT in
pre-standardized-timezone days. This changes the output of one of
our test cases. Since we need to be able to run with system tzdata
files that may or may not contain this update, we'd better stop
making that specific test.
I switched it to use Asia/Singapore, which has a roughly similar UTC
offset. That LMT value hasn't changed in tzdb since 2003, so we can
hope that it's well established.
I also noticed that this set of make_timestamptz tests only exercises
zones east of Greenwich, which seems rather sad, and was not the
original intent AFAICS. (We've already changed these tests once
to stabilize their results across tzdata updates, cf 66b737cd9;
it looks like I failed to consider the UTC-offset-sign aspect then.)
To improve that, add a test with Pacific/Honolulu. That LMT offset
is also quite old in tzdb, so we'll cross our fingers that it doesn't
get improved.
Reported-by: Christoph Berg <cb@df7cb.de>
Discussion: https://postgr.es/m/Z46inkznCxesvDEb@msg.df7cb.de
Backpatch-through: 13
|
|
In the name of ABI stability (that is, to avoid a library major
version bump for libpq), libpq still exports a version of pqsignal()
that we no longer want to use ourselves. However, since that has
the same link name as the function exported by src/port/pqsignal.c,
there is a link ordering dependency determining which version will
actually get used by code that uses libpq as well as libpgport.a.
It now emerges that the wrong version has been used by pgbench and
psql since commit 06843df4a rearranged their link commands. This
can result in odd failures in pgbench with the -T switch, since its
SIGALRM handler will now not be marked SA_RESTART. psql may have
some edge-case problems in \watch, too.
Since we don't want to depend on link ordering effects anymore,
let's fix this in the same spirit as b6c7cfac8: use macros to change
the actual link names of the competing functions. We cannot change
legacy-pqsignal.c's exported name of course, so the victim has to be
src/port/pqsignal.c.
In master, rename its exported name to be pqsignal_fe in frontend or
pqsignal_be in backend. (We could perhaps have gotten away with using
the same symbol in both cases, but since the FE and BE versions now
work a little differently, it seems advisable to use different names.)
In back branches, rename to pqsignal_fe in frontend but keep it as
pqsignal in backend. The frontend change could affect third-party
code that is calling pqsignal from libpgport.a or libpgport_shlib.a,
but only if the code is compiled against port.h from a different minor
release than libpgport. Since we don't support using libpgport as a
shared library, it seems unlikely that there will be such a problem.
I left the backend symbol unchanged to avoid an ABI break for
extensions. This means that the link ordering hazard still exists
for any extension that links against libpq. However, none of our own
extensions use both pqsignal() and libpq, and we're not making things
any worse for third-party extensions that do.
Report from Andy Fan, diagnosis by Fujii Masao, patch by me.
Back-patch to all supported branches, as 06843df4a was.
Discussion: https://postgr.es/m/87msfz5qv2.fsf@163.com
|
|
If a new catalog tuple is inserted that belongs to a catcache list
entry, and cache invalidation happens while the list entry is being
built, the list entry might miss the newly inserted tuple.
To fix, change the way we detect concurrent invalidations while a
catcache entry is being built. Keep a stack of entries that are being
built, and apply cache invalidation to those entries in addition to
the real catcache entries. This is similar to the in-progress list in
relcache.c.
Back-patch to all supported versions.
Reviewed-by: Noah Misch
Discussion: https://www.postgresql.org/message-id/2234dc98-06fe-42ed-b5db-ac17384dc880@iki.fi
|
|
Change our ftruncate() macro to use the 64-bit variant of chsize(), and
add a new macro to redirect lseek() to _lseeki64().
Back-patch to all supported releases, in preparation for a bug fix.
Tested-by: Davinder Singh <davinder.singh@enterprisedb.com>
Discussion: https://postgr.es/m/CAKZiRmyM4YnokK6Oenw5JKwAQ3rhP0YTz2T-tiw5dAQjGRXE3Q%40mail.gmail.com
|
|
It's possible that external code is calling smgrtruncate(). Any
external callers might like to consider the recent changes to
RelationTruncate(), but commit 38c579b0 should not have changed the
function prototype in the back-branches, per ABI stability policy.
Restore smgrtruncate()'s traditional argument list in the back-branches,
but make it a wrapper for a new function smgrtruncate2(). The three
callers in core can use smgrtruncate2() directly. In master (18-to-be),
smgrtruncate2() is effectively renamed to smgrtruncate(), so this wart
is cleaned up.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKG%2BThae6x6%2BjmQiuALQBT2Ae1ChjMh1%3DkMvJ8y_SBJZrvA%40mail.gmail.com
|
|
Cause parallel workers to not check datallowconn, rolcanlogin, and
ACL_CONNECT privileges. The leader already checked these things
(except for rolcanlogin which might have been checked for a different
role). Re-checking can accomplish little except to induce unexpected
failures in applications that might not even be aware that their query
has been parallelized. We already had the principle that parallel
workers rely on their leader to pass a valid set of authorization
information, so this change just extends that a bit further.
Also, modify the ReservedConnections, datconnlimit and rolconnlimit
logic so that these limits are only enforced against regular backends,
and only regular backends are counted while checking if the limits
were already reached. Previously, background processes that had an
assigned database or role were subject to these limits (with rather
random exclusions for autovac workers and walsenders), and the set of
existing processes that counted against each limit was quite haphazard
as well. The point of these limits, AFAICS, is to ensure the
availability of PGPROC slots for regular backends. Since all other
types of processes have their own separate pools of PGPROC slots, it
makes no sense either to enforce these limits against them or to count
them while enforcing the limit.
While edge-case failures of these sorts have been possible for a
long time, the problem got a good deal worse with commit 5a2fed911
(CVE-2024-10978), which caused parallel workers to make some of these
checks using the leader's current role where before we had used its
AuthenticatedUserId, thus allowing parallel queries to fail after
SET ROLE. The previous behavior was fairly accidental and I have
no desire to return to it.
This patch includes reverting 73c9f91a1, which was an emergency hack
to suppress these same checks in some cases. It wasn't complete,
as shown by a recent bug report from Laurenz Albe. We can also revert
fd4d93d26 and 492217301, which hacked around the same problems in one
regression test.
In passing, remove the special case for autovac workers in
CheckMyDatabase; it seems cleaner to have AutoVacWorkerMain pass
the INIT_PG_OVERRIDE_ALLOW_CONNS flag, now that that does what's
needed.
Like 5a2fed911, back-patch to supported branches (which sadly no
longer includes v12).
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
|
|
Commit aac2c9b4fde889d13f859c233c2523345e72d32b mandated such locking
and attempted to fulfill that mandate, but it missed REASSIGN OWNED.
Hence, it remained possible to lose VACUUM's inplace update of
datfrozenxid if a REASSIGN OWNED processed that database at the same
time. This didn't affect the other inplace-updated catalog, pg_class.
For pg_class, REASSIGN OWNED calls ATExecChangeOwner() instead of the
generic AlterObjectOwner_internal(), and ATExecChangeOwner() fulfills
the locking mandate.
Like in GRANT, implement this by following the locking protocol for any
catalog subject to the generic AlterObjectOwner_internal(). It would
suffice to do this for IsInplaceUpdateOid() catalogs only. Back-patch
to v13 (all supported versions).
Kirill Reshke. Reported by Alexander Kukushkin.
Discussion: https://postgr.es/m/CAFh8B=mpKjAy4Cuun-HP-f_vRzh2HSvYFG3rhVfYbfEBUhBAGg@mail.gmail.com
|
|
RelationTruncate() does three things, while holding an
AccessExclusiveLock and preventing checkpoints:
1. Logs the truncation.
2. Drops buffers, even if they're dirty.
3. Truncates some number of files.
Step 2 could previously be canceled if it had to wait for I/O, and step
3 could and still can fail in file APIs. All orderings of these
operations have data corruption hazards if interrupted, so we can't give
up until the whole operation is done. When dirty pages were discarded
but the corresponding blocks were left on disk due to ERROR, old page
versions could come back from disk, reviving deleted data (see
pgsql-bugs #18146 and several like it). When primary and standby were
allowed to disagree on relation size, standbys could panic (see
pgsql-bugs #18426) or revive data unknown to visibility management on
the primary (theorized).
Changes:
* WAL is now unconditionally flushed first
* smgrtruncate() is now called in a critical section, preventing
interrupts and causing PANIC on file API failure
* smgrtruncate() has a new parameter for existing fork sizes,
because it can't call smgrnblocks() itself inside a critical section
The changes apply to RelationTruncate(), smgr_redo() and
pg_truncate_visibility_map(). That last is also brought up to date with
other evolutions of the truncation protocol.
The VACUUM FileTruncate() failure mode had been discussed in older
reports than the ones referenced below, with independent analysis from
many people, but earlier theories on how to fix it were too complicated
to back-patch. The more recently invented cancellation bug was
diagnosed by Alexander Lakhin. Other corruption scenarios were spotted
by me while iterating on this patch and earlier commit 75818b3a.
Back-patch to all supported releases.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reported-by: rootcause000@gmail.com
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/18146-04e908c662113ad5%40postgresql.org
Discussion: https://postgr.es/m/18426-2d18da6586f152d6%40postgresql.org
|
|
Our parallel-mode code only works when we are executing a query
in full, so ExecutePlan must disable parallel mode when it is
asked to do partial execution. The previous logic for this
involved passing down a flag (variously named execute_once or
run_once) from callers of ExecutorRun or PortalRun. This is
overcomplicated, and unsurprisingly some of the callers didn't
get it right, since it requires keeping state that not all of
them have handy; not to mention that the requirements for it were
undocumented. That led to assertion failures in some corner
cases. The only state we really need for this is the existing
QueryDesc.already_executed flag, so let's just put all the
responsibility in ExecutePlan. (It could have been done in
ExecutorRun too, leading to a slightly shorter patch -- but if
there's ever more than one caller of ExecutePlan, it seems better
to have this logic in the subroutine than the callers.)
This makes those ExecutorRun/PortalRun parameters unnecessary.
In master it seems okay to just remove them, returning the
API for those functions to what it was before parallelism.
Such an API break is clearly not okay in stable branches,
but for them we can just leave the parameters in place after
documenting that they do nothing.
Per report from Yugo Nagata, who also reviewed and tested
this patch. Back-patch to all supported branches.
Discussion: https://postgr.es/m/20241206062549.710dc01cf91224809dd6c0e1@sraoss.co.jp
|
|
Usually an entry in pg_amop or pg_amproc does not need a dependency on
its amoplefttype/amoprighttype/amproclefttype/amprocrighttype types,
because there is an indirect dependency via the argument types of its
referenced operator or procedure, or via the opclass it belongs to.
However, for some support procedures in some index AMs, the argument
types of the support procedure might not mention the column data type
at all. Also, the amop/amproc entry might be treated as "loose" in
the opfamily, in which case it lacks a dependency on any particular
opclass; or it might be a cross-type entry having a reference to a
datatype that is not its opclass' opcintype.
The upshot of all this is that there are cases where a datatype can
be dropped while leaving behind amop/amproc entries that mention it,
because there is no path in pg_depend showing that those entries
depend on that type. Such entries are harmless in normal activity,
because they won't get used, but they cause problems for maintenance
actions such as dropping the operator family. They also cause pg_dump
to produce bogus output. The previous commit put a band-aid on the
DROP OPERATOR FAMILY failure, but a real fix is needed.
To fix, add pg_depend entries showing that a pg_amop/pg_amproc entry
depends on its lefttype/righttype. To avoid bloating pg_depend too
much, skip this if the referenced operator or function has that type
as an input type. (I did not bother with considering the possible
indirect dependency via the opclass' opcintype; at least in the
reported case, that wouldn't help anyway.)
Probably, the reason this has escaped notice for so long is that
add-on datatypes and relevant opclasses/opfamilies are usually
packaged as extensions nowadays, so that there's no way to drop
a type without dropping the referencing opclasses/opfamilies too.
Still, in the absence of pg_depend entries there's nothing that
constrains DROP EXTENSION to drop the opfamily entries before the
datatype, so it seems possible for a DROP failure to occur anyway.
The specific case that was reported doesn't fail in v13, because
v13 prefers to attach the support procedure to the opclass not the
opfamily. But it's surely possible to construct other edge cases
that do fail in v13, so patch that too.
Per report from Yoran Heling. Back-patch to all supported branches.
Discussion: https://postgr.es/m/Z1MVCOh1hprjK5Sf@gmai021
|
|
If passed a read-write expanded object pointer, the EEOP_NULLIF
code would hand that same pointer to the equality function
and then (unless equality was reported) also return the same
pointer as its value. This is no good, because a function that
receives a read-write expanded object pointer is fully entitled
to scribble on or even delete the object, thus corrupting the
NULLIF output. (This problem is likely unobservable with the
equality functions provided in core Postgres, but it's easy to
demonstrate with one coded in plpgsql.)
To fix, make sure the pointer passed to the equality function
is read-only. We can still return the original read-write
pointer as the NULLIF result, allowing optimization of later
operations.
Per bug #18722 from Alexander Lakhin. This has been wrong
since we invented expanded objects, so back-patch to all
supported branches.
Discussion: https://postgr.es/m/18722-fd9e645448cc78b4@postgresql.org
|
|
Previously we checked "for <stdbool.h> that conforms to C99" using
autoconf's AC_HEADER_STDBOOL macro. We've required C99 since PostgreSQL
12, so the test was redundant, and under C23 it was broken: autoconf
2.69's implementation doesn't understand C23's new empty header (the
macros it's looking for went away, replaced by language keywords).
Later autoconf versions fixed that, but let's just remove the
anachronistic test.
HAVE_STDBOOL_H and HAVE__BOOL will no longer be defined, but they
weren't directly tested in core or likely extensions (except in 11, see
below). PG_USE_STDBOOL (or USE_STDBOOL in 11 and 12) is still defined
when sizeof(bool) is 1, which should be true on all modern systems.
Otherwise we define our own bool type and values of size 1, which would
fail to compile under C23 as revealed by the broken test. (We'll
probably clean that dead code up in master, but here we want a minimal
back-patchable change.)
This came to our attention when GCC 15 recently started using using C23
by default and failed to compile the replacement code, as reported by
Sam James and build farm animal alligator.
Back-patch to all supported releases, and then two older versions that
also know about <stdbool.h>, per the recently-out-of-support policy[1].
12 requires C99 so it's much like the supported releases, but 11 only
assumes C89 so it now uses AC_CHECK_HEADERS instead of the overly picky
AC_HEADER_STDBOOL. (I could find no discussion of which historical
systems had <stdbool.h> but failed the conformance test; if they ever
existed, they surely aren't relevant to that policy's goals.)
[1] https://wiki.postgresql.org/wiki/Committing_checklist#Policies
Reported-by: Sam James <sam@gentoo.org>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org> (master version)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (approach)
Discussion: https://www.postgresql.org/message-id/flat/87o72eo9iu.fsf%40gentoo.org
|
|
Commits aac2c9b4f et al. added a bool field to struct ResultRelInfo.
That's no problem in the master branch, but in released branches
care must be taken when modifying publicly-visible structs to avoid
an ABI break for extensions. Frequently we solve that by adding the
new field at the end of the struct, and that's what was done here.
But ResultRelInfo has stricter constraints than just about any other
node type in Postgres. Some executor APIs require extensions to index
into arrays of ResultRelInfo, which means that any change whatever in
sizeof(ResultRelInfo) causes a fatal ABI break.
Fortunately, this is easy to fix, because the new field can be
squeezed into available padding space instead --- indeed, that's where
it was put in master, so this fix also removes a cross-branch coding
variation.
Per report from Pavan Deolasee. Patch v14-v17 only; earlier versions
did not gain the extra field, nor is there any problem in master.
Discussion: https://postgr.es/m/CABOikdNmVBC1LL6pY26dyxAS2f+gLZvTsNt=2XbcyG7WxXVBBQ@mail.gmail.com
|
|
In commit 08c0d6ad6 which introduced "rainbow" arcs in regex NFAs,
I didn't think terribly hard about what to do when creating the color
complement of a rainbow arc. Clearly, the complement cannot match any
characters, and I took the easy way out by just not building any arcs
at all in the complement arc set. That mostly works, but Nikolay
Shaplov found a case where it doesn't: if we decide to delete that
sub-NFA later because it's inside a "{0}" quantifier, delsub()
suffered an assertion failure. That's because delsub() relies on
the target sub-NFA being fully connected. That was always true
before, and the best fix seems to be to restore that property.
Hence, invent a new arc type CANTMATCH that can be generated in
place of an empty color complement, and drop it again later when we
start NFA optimization. (At that point we don't need to do delsub()
any more, and besides there are other cases where NFA optimization can
lead to disconnected subgraphs.)
It appears that this bug has no consequences in a non-assert-enabled
build: there will be some transiently leaked NFA states/arcs, but
they'll get cleaned up eventually. Still, we don't like assertion
failures, so back-patch to v14 where rainbow arcs were introduced.
Per bug #18708 from Nikolay Shaplov.
Discussion: https://postgr.es/m/18708-f94f2599c9d2c005@postgresql.org
|
|
This fixes a set of race conditions with cumulative statistics where a
shared stats entry could be dropped while it should still be valid in
the event when it is reused: an entry may refer to a different object
but requires the same hash key. This can happen with various stats
kinds, like:
- Replication slots that compute internally an index number, for
different slot names.
- Stats kinds that use an OID in the object key, where a wraparound
causes the same key to be used if an OID is used for the same object.
- As of PostgreSQL 18, custom pgstats kinds could also be an issue,
depending on their implementation.
This issue is fixed by introducing a counter called "generation" in the
shared entries via PgStatShared_HashEntry, initialized at 0 when an
entry is created and incremented when the same entry is reused, to avoid
concurrent issues on drop because of other backends still holding a
reference to it. This "generation" is copied to the local copy that a
backend holds when looking at an object, then cross-checked with the
shared entry to make sure that the entry is not dropped even if its
"refcount" justifies that if it has been reused.
This problem could show up when a backend shuts down and needs to
discard any entries it still holds, causing statistics to be removed
when they should not, or even an assertion failure. Another report
involved a failure in a standby after an OID wraparound, where the
startup process would FATAL on a "can only drop stats once", stopping
recovery abruptly. The buildfarm has been sporadically complaining
about the problem, as well, but the window is hard to reach with the
in-core tests.
Note that the issue can be reproduced easily by adding a sleep before
dshash_find() in pgstat_release_entry_ref() to enlarge the problematic
window while repeating test_decoding's isolation test oldest_xmin a
couple of times, for example, as pointed out by Alexander Lakhin.
Reported-by: Alexander Lakhin, Peter Smith
Author: Kyotaro Horiguchi, Michael Paquier
Reviewed-by: Bertrand Drouvot
Discussion: https://postgr.es/m/CAA4eK1KxuMVyAryz_Vk5yq3ejgKYcL6F45Hj9ZnMNBS-g+PuZg@mail.gmail.com
Discussion: https://postgr.es/m/17947-b9554521ad963c9c@postgresql.org
Backpatch-through: 15
|
|
The SQL spec mandates that SET SESSION AUTHORIZATION implies
SET ROLE NONE. We tried to implement that within the lowest-level
functions that manipulate these settings, but that was a bad idea.
In particular, guc.c assumes that it doesn't matter in what order
it applies GUC variable updates, but that was not the case for these
two variables. This problem, compounded by some hackish attempts to
work around it, led to some security-grade issues:
* Rolling back a transaction that had done SET SESSION AUTHORIZATION
would revert to SET ROLE NONE, even if that had not been the previous
state, so that the effective user ID might now be different from what
it had been.
* The same for SET SESSION AUTHORIZATION in a function SET clause.
* If a parallel worker inspected current_setting('role'), it saw
"none" even when it should see something else.
Also, although the parallel worker startup code intended to cope
with the current role's pg_authid row having disappeared, its
implementation of that was incomplete so it would still fail.
Fix by fully separating the miscinit.c functions that assign
session_authorization from those that assign role. To implement the
spec's requirement, teach set_config_option itself to perform "SET
ROLE NONE" when it sets session_authorization. (This is undoubtedly
ugly, but the alternatives seem worse. In particular, there's no way
to do it within assign_session_authorization without incompatible
changes in the API for GUC assign hooks.) Also, improve
ParallelWorkerMain to directly set all the relevant user-ID variables
instead of relying on some of them to get set indirectly. That
allows us to survive not finding the pg_authid row during worker
startup.
In v16 and earlier, this includes back-patching 9987a7bf3 which
fixed a violation of GUC coding rules: SetSessionAuthorization
is not an appropriate place to be throwing errors from.
Security: CVE-2024-10978
|
|
Now that lstat() reports junction points with S_IFLNK/S_ISLINK(), and
unlink() can unlink them, there is no need for conditional code for
Windows in a few places. That was expressed by testing for WIN32 or
S_ISLNK, which we can now constant-fold.
The coding around pgwin32_is_junction() was a bit suspect anyway, as we
never checked for errors, and we also know that errors can be spuriously
reported because of transient sharing violations on this OS. The
lstat()-based code has handling for that.
This also reverts 4fc6b6ee on master only. That was done because
lstat() didn't previously work for symlinks (junction points), but now
it does.
Tested-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/CA%2BhUKGLfOOeyZpm5ByVcAt7x5Pn-%3DxGRNCvgiUPVVzjFLtnY0w%40mail.gmail.com
(cherry picked from commit 5fc88c5d53e43fa7dcea93499d230a0bf70f4f77)
Author: Thomas Munro <tmunro@postgresql.org>
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
|
|
Junction points will be reported with S_ISLNK(x.st_mode), simulating
POSIX lstat(). stat() will follow pseudo-symlinks, like in POSIX (but
only one level before giving up, unlike in POSIX).
This completes a TODO left by commit bed90759fcb.
Tested-by: Andrew Dunstan <andrew@dunslane.net> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGLfOOeyZpm5ByVcAt7x5Pn-%3DxGRNCvgiUPVVzjFLtnY0w%40mail.gmail.com
(cherry picked from commit c5cb8f3b770c043509b61528664bcd805e1777e6)
Author: Thomas Munro <tmunro@postgresql.org>
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
|
|
Supply a new memory manager for RuntimeDyld, to avoid crashes in
generated code caused by memory placement that can overflow a 32 bit
data type. This is a drop-in replacement for the
llvm::SectionMemoryManager class in the LLVM library, with Michael
Smith's proposed fix from
https://www.github.com/llvm/llvm-project/pull/71968.
We hereby slurp it into our own source tree, after moving into a new
namespace llvm::backport and making some minor adjustments so that it
can be compiled with older LLVM versions as far back as 12. It's harder
to make it work on even older LLVM versions, but it doesn't seem likely
that people are really using them so that is not investigated for now.
The problem could also be addressed by switching to JITLink instead of
RuntimeDyld, and that is the LLVM project's recommended solution as
the latter is about to be deprecated. We'll have to do that soon enough
anyway, and then when the LLVM version support window advances far
enough in a few years we'll be able to delete this code. Unfortunately
that wouldn't be enough for PostgreSQL today: in most relevant versions
of LLVM, JITLink is missing or incomplete.
Several other projects have already back-ported this fix into their fork
of LLVM, which is a vote of confidence despite the lack of commit into
LLVM as of today. We don't have our own copy of LLVM so we can't do
exactly what they've done; instead we have a copy of the whole patched
class so we can pass an instance of it to RuntimeDyld.
The LLVM project hasn't chosen to commit the fix yet, and even if it
did, it wouldn't be back-ported into the releases of LLVM that most of
our users care about, so there is not much point in waiting any longer
for that. If they make further changes and commit it to LLVM 19 or 20,
we'll still need this for older versions, but we may want to
resynchronize our copy and update some comments.
The changes that we've had to make to our copy can be seen by diffing
our SectionMemoryManager.{h,cpp} files against the ones in the tree of
the pull request. Per the LLVM project's license requirements, a copy
is in SectionMemoryManager.LICENSE.
This should fix the spate of crash reports we've been receiving lately
from users on large memory ARM systems.
Back-patch to all supported releases.
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se> (license aspects)
Reported-by: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Discussion: https://postgr.es/m/CAO6_Xqr63qj%3DSx7HY6ZiiQ6R_JbX%2B-p6sTPwDYwTWZjUmjsYBg%40mail.gmail.com
|
|
This reverts commit 95c5acb3fc261067ab65ddc0b2dca8e162f09442 (v17) and
counterparts in each other non-master branch. If released, that commit
would have caused a worst-in-years minor release regression, via
undetected LWLock self-deadlock. This commit and its self-deadlock fix
warrant more bake time in the master branch.
Reported by Alexander Lakhin.
Discussion: https://postgr.es/m/10ec0bc3-5933-1189-6bb8-5dec4114558e@gmail.com
|
|
Commit a07e03fd8fa7daf4d1356f7cb501ffe784ea6257 changed inplace updates
to wait for heap_update() commands like GRANT TABLE and GRANT DATABASE.
By keeping the pin during that wait, a sequence of autovacuum workers
and an uncommitted GRANT starved one foreground LockBufferForCleanup()
for six minutes, on buildfarm member sarus. Prevent, at the cost of a
bit of complexity. Back-patch to v12, like the earlier commit. That
commit and heap_inplace_lock() have not yet appeared in any release.
Discussion: https://postgr.es/m/20241026184936.ae.nmisch@google.com
|
|
There are two functions that can be used in event triggers to get more
details about a rewrite happening on a relation. Both had a limited
documentation:
- pg_event_trigger_table_rewrite_reason() and
pg_event_trigger_table_rewrite_oid() were not mentioned in the main
event trigger section in the paragraph dedicated to the event
table_rewrite.
- pg_event_trigger_table_rewrite_reason() returns an integer which is a
bitmap of the reasons why a rewrite happens. There was no explanation
about the meaning of these values, forcing the reader to look at the
code to find out that these are defined in event_trigger.h.
While on it, let's add a comment in event_trigger.h where the
AT_REWRITE_* are defined, telling to update the documentation when
these values are changed.
Backpatch down to 13 as a consequence of 1ad23335f36b, where this area
of the documentation has been heavily reworked.
Author: Greg Sabino Mullane
Discussion: https://postgr.es/m/CAKAnmmL+Z6j-C8dAx1tVrnBmZJu+BSoc68WSg3sR+CVNjBCqbw@mail.gmail.com
Backpatch-through: 13
|
|
The inplace update survives ROLLBACK. The inval didn't, so another
backend's DDL could then update the row without incorporating the
inplace update. In the test this fixes, a mix of CREATE INDEX and ALTER
TABLE resulted in a table with an index, yet relhasindex=f. That is a
source of index corruption. Back-patch to v12 (all supported versions).
The back branch versions don't change WAL, because those branches just
added end-of-recovery SIResetAll(). All branches change the ABI of
extern function PrepareToInvalidateCacheTuple(). No PGXN extension
calls that, and there's no apparent use case in extensions.
Reviewed by Nitin Motiani and (in earlier versions) Andres Freund.
Discussion: https://postgr.es/m/20240523000548.58.nmisch@google.com
|
|
An inplace update's invalidation messages are part of its transaction's
commit record. However, the update survives even if its transaction
aborts or we stop recovery before replaying its transaction commit.
After recovery, a backend that started in recovery could update the row
without incorporating the inplace update. That could result in a table
with an index, yet relhasindex=f. That is a source of index corruption.
This bulk invalidation avoids the functional consequences. A future
change can fix the !RecoveryInProgress() scenario without changing the
WAL format. Back-patch to v17 - v12 (all supported versions). v18 will
instead add invalidations to WAL.
Discussion: https://postgr.es/m/20240618152349.7f.nmisch@google.com
|
|
Because we have been setting this too low, there has been a
long-standing warning about a missing declaration for inet_pton().
Modern gcc now considers this an error, so we have been getting failures
on the buildfarm animal fairywren.
Fix suggested by Thomas Munro.
This isn't needed in later branches, as they already set MIN_WINNT
higher, nor on earlier branches because they don't use inet_pton().
Discussion: https://postgr.es/m/574fae43-c993-4a25-b0e5-04c3e9c36d6d@dunslane.net
|
|
The previous commit fixed some ways of losing an inplace update. It
remained possible to lose one when a backend working toward a
heap_update() copied a tuple into memory just before inplace update of
that tuple. In catalogs eligible for inplace update, use LOCKTAG_TUPLE
to govern admission to the steps of copying an old tuple, modifying it,
and issuing heap_update(). This includes MERGE commands. To avoid
changing most of the pg_class DDL, don't require LOCKTAG_TUPLE when
holding a relation lock sufficient to exclude inplace updaters.
Back-patch to v12 (all supported versions). In v13 and v12, "UPDATE
pg_class" or "UPDATE pg_database" can still lose an inplace update. The
v14+ UPDATE fix needs commit 86dc90056dfdbd9d1b891718d2e5614e3e432f35,
and it wasn't worth reimplementing that fix without such infrastructure.
Reviewed by Nitin Motiani and (in earlier versions) Heikki Linnakangas.
Discussion: https://postgr.es/m/20231027214946.79.nmisch@google.com
|
|
As previously-added tests demonstrated, heap_inplace_update() could
instead update an unrelated tuple of the same catalog. It could lose
the update. Losing relhasindex=t was a source of index corruption.
Inplace-updating commands like VACUUM will now wait for heap_update()
commands like GRANT TABLE and GRANT DATABASE. That isn't ideal, but a
long-running GRANT already hurts VACUUM progress more just by keeping an
XID running. The VACUUM will behave like a DELETE or UPDATE waiting for
the uncommitted change.
For implementation details, start at the systable_inplace_update_begin()
header comment and README.tuplock. Back-patch to v12 (all supported
versions). In back branches, retain a deprecated heap_inplace_update(),
for extensions.
Reported by Smolkin Grigory. Reviewed by Nitin Motiani, (in earlier
versions) Heikki Linnakangas, and (in earlier versions) Alexander
Lakhin.
Discussion: https://postgr.es/m/CAMp+ueZQz3yDk7qg42hk6-9gxniYbp-=bG2mgqecErqR5gGGOA@mail.gmail.com
|
|
The code intends to allow GUCs to be set within parallel workers
via function SET clauses, but not otherwise. However, doing so fails
for "session_authorization" and "role", because the assign hooks for
those attempt to set the subsidiary "is_superuser" GUC, and that call
falls foul of the "not otherwise" prohibition. We can't switch to
using GUC_ACTION_SAVE for this, so instead add a new GUC variable
flag GUC_ALLOW_IN_PARALLEL to mark is_superuser as being safe to set
anyway. (This is okay because is_superuser has context PGC_INTERNAL
and thus only hard-wired calls can change it. We'd need more thought
before applying the flag to other GUCs; but maybe there are other
use-cases.) This isn't the prettiest fix perhaps, but other
alternatives we thought of would be much more invasive.
While here, correct a thinko in commit 059de3ca4: when rejecting
a GUC setting within a parallel worker, we should return 0 not -1
if the ereport doesn't longjmp. (This seems to have no consequences
right now because no caller cares, but it's inconsistent.) Improve
the comments to try to forestall future confusion of the same kind.
Despite the lack of field complaints, this seems worth back-patching.
Thanks to Nathan Bossart for the idea to invent a new flag,
and for review.
Discussion: https://postgr.es/m/2833457.1723229039@sss.pgh.pa.us
|
|
When pg_dump retrieves the list of database objects and performs the
data dump, there was possibility that objects are replaced with others
of the same name, such as views, and access them. This vulnerability
could result in code execution with superuser privileges during the
pg_dump process.
This issue can arise when dumping data of sequences, foreign
tables (only 13 or later), or tables registered with a WHERE clause in
the extension configuration table.
To address this, pg_dump now utilizes the newly introduced
restrict_nonsystem_relation_kind GUC parameter to restrict the
accesses to non-system views and foreign tables during the dump
process. This new GUC parameter is added to back branches too, but
these changes do not require cluster recreation.
Back-patch to all supported branches.
Reviewed-by: Noah Misch
Security: CVE-2024-7348
Backpatch-through: 12
|
|
We store tuples into the portal's tuple store for a PORTAL_ONE_MOD_WITH
query as well.
Back-patch to all supported branches.
Reviewed by Andy Fan.
Discussion: https://postgr.es/m/CAPmGK14HVYBZYZtHabjeCd-e31VT%3Dwx6rQNq8QfehywLcpZ2Hw%40mail.gmail.com
|
