| Age | Commit message (Collapse) | Author |
|---|
|
While SH_STAT() is only used for debugging, the allocated array can be large,
and therefore should be freed.
It's unclear why coverity started warning now.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Reported-by: Coverity
Discussion: https://postgr.es/m/3005248.1712538233@sss.pgh.pa.us
Backpatch: 12-
|
|
Specify OldTable first, NewTable second as used by
table_relation_copy_for_cluster() and as implemented in
heapam_relation_copy_for_cluster().
Backpatch to PostgreSQL 12, where TableAmRoutine was introduced.
Discussion: https://postgr.es/m/ME3P282MB3166860D4911AE82F92DF7C5B63F2%40ME3P282MB3166.AUSP282.PROD.OUTLOOK.COM
Author: Japin Li
Reviewed-by: Pavel Borisov
Backpatch-through: 12
|
|
If temp tables have dependencies (such as sequences) then it's
possible for autovacuum's cleanup of orphan temp tables to deadlock
against an incoming backend that's trying to clean out the temp
namespace for its own use. That can happen because RemoveTempRelations'
performDeletion call can visit objects within the namespace in
an order different from the order in which a per-table deletion
will visit them.
To fix, observe that performDeletion will begin by taking an exclusive
lock on the temp namespace (even though it won't actually delete it).
So, if we can get a shared lock on the namespace, we can be sure we're
not running concurrently with RemoveTempRelations, while also not
conflicting with ordinary use of the namespace. This requires
introducing a conditional version of LockDatabaseObject, but that's no
big deal. (It's surprising we've got along without that this long.)
Report and patch by Mikhail Zhilin. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/c43ce028-2bc2-4865-9b89-3f706246eed5@postgrespro.ru
|
|
There is a very ancient hack in check_sql_fn_retval that allows a
single SELECT targetlist entry of composite type to be taken as
supplying all the output columns of a function returning composite.
(This is grotty and fundamentally ambiguous, but it's really hard
to do nested composite-returning functions without it.)
As far as I know, that doesn't cause any problems in ordinary
functions. It's disastrous for procedures however. All procedures
that have any output parameters are labeled with prorettype RECORD,
and the CALL code expects it will get back a record with one column
per output parameter, regardless of whether any of those parameters
is composite. Doing something else leads to an assertion failure
or core dump.
This is simple enough to fix: we just need to not apply that rule
when considering procedures. However, that requires adding another
argument to check_sql_fn_retval, which at least in principle might be
getting called by external callers. Therefore, in the back branches
convert check_sql_fn_retval into an ABI-preserving wrapper around a
new function check_sql_fn_retval_ext.
Per report from Yahor Yuzefovich. This has been broken since we
implemented procedures, so back-patch to all supported branches.
Discussion: https://postgr.es/m/CABz5gWHSjj2df6uG0NRiDhZ_Uz=Y8t0FJP-_SVSsRsnrQT76Gg@mail.gmail.com
|
|
This reverts commit eae7be600be7, following a discussion with Tom Lane,
due to concerns that this impacts the decisions made by the planner for
the number of workers spawned based on the inlining and const-folding of
index expressions and predicate for cases that would have worked until
this commit.
Discussion: https://postgr.es/m/162802.1709746091@sss.pgh.pa.us
Backpatch-through: 12
|
|
As coded, the planner logic that calculates the number of parallel
workers to use for a parallel index build uses expressions and
predicates from the relcache, which are flattened for the planner by
eval_const_expressions().
As reported in the bug, an immutable parallel-unsafe function flattened
in the relcache would become a Const, which would be considered as
parallel-safe, even if the predicate or the expressions including the
function are not safe in parallel workers. Depending on the expressions
or predicate used, this could cause the parallel build to fail.
Tests are included that check parallel index builds with parallel-unsafe
predicate and expressions. Two routines are added to lsyscache.h to be
able to retrieve expressions and predicate of an index from its pg_index
data.
Reported-by: Alexander Lakhin
Author: Tender Wang
Reviewed-by: Jian He, Michael Paquier
Discussion: https://postgr.es/m/CAHewXN=UaAaNn9ruHDH3Os8kxLVmtWqbssnf=dZN_s9=evHUFA@mail.gmail.com
Backpatch-through: 12
|
|
try_index_open() is able to open an index if its relkind fits, except
that it would return NULL instead of generated an error if the relation
does not exist. This new routine will be used by an upcoming patch to
make REINDEX on partitioned relations more robust when an index in a
partition tree is dropped.
Extracted from a larger patch by the same author.
Author: Fei Changhong
Discussion: https://postgr.es/m/tencent_6A52106095ACDE55333E3AD33F304C0C3909@qq.com
Backpatch-through: 14
|
|
Until now LWLockDequeueSelf() sequentially searched the list of waiters to see
if the current proc is still is on the list of waiters, or has already been
removed. In extreme workloads, where the wait lists are very long, this leads
to a quadratic behavior. #backends iterating over a list #backends
long. Additionally, the likelihood of needing to call LWLockDequeueSelf() in
the first place also increases with the increased length of the wait queue, as
it becomes more likely that a lock is released while waiting for the wait list
lock, which is held for longer during lock release.
Due to the exponential back-off in perform_spin_delay() this is surprisingly
hard to detect. We should make that easier, e.g. by adding a wait event around
the pg_usleep() - but that's a separate patch.
The fix is simple - track whether a proc is currently waiting in the wait list
or already removed but waiting to be woken up in PGPROC->lwWaiting.
In some workloads with a lot of clients contending for a small number of
lwlocks (e.g. WALWriteLock), the fix can substantially increase throughput.
This has been originally fixed for 16~ with a4adc31f6902 without a
backpatch, and we have heard complaints from users impacted by this
quadratic behavior in older versions as well.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Bharath Rupireddy <bharath.rupireddyforpostgres@gmail.com>
Discussion: https://postgr.es/m/20221027165914.2hofzp4cvutj6gin@awork3.anarazel.de
Discussion: https://postgr.es/m/CALj2ACXktNbG=K8Xi7PSqbofTZozavhaxjatVc14iYaLu4Maag@mail.gmail.com
Backpatch-through: 12
|
|
We should have done it this way all along, but we accidentally got
away with using the wrong BIO field up until OpenSSL 3.2. There,
the library's BIO routines that we rely on use the "data" field
for their own purposes, and our conflicting use causes assorted
weird behaviors up to and including core dumps when SSL connections
are attempted. Switch to using the approved field for the purpose,
i.e. app_data.
While at it, remove our configure probes for BIO_get_data as well
as the fallback implementation. BIO_{get,set}_app_data have been
there since long before any OpenSSL version that we still support,
even in the back branches.
Also, update src/test/ssl/t/001_ssltests.pl to allow for a minor
change in an error message spelling that evidently came in with 3.2.
Tristan Partin and Bo Andreson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAN55FZ1eDDYsYaL7mv+oSLUij2h_u6hvD4Qmv-7PK7jkji0uyQ@mail.gmail.com
|
|
If the tuple being updated is not visible to the crosscheck snapshot,
we return TM_Updated but the assertions would not hold in that case.
Move them to before the cross-check.
Fixes bug #17893. Backpatch to all supported versions.
Author: Alexander Lakhin
Backpatch-through: 12
Discussion: https://www.postgresql.org/message-id/17893-35847009eec517b5%40postgresql.org
|
|
When performing inlining LLVM unfortunately "leaks" types (the
types survive and are usable, but a new round of inlining will
recreate new structurally equivalent types). This accumulation
will over time amount to a memory leak which for some queries
can be large enough to trigger the OOM process killer.
To avoid accumulation of types, all IR related data is stored
in an LLVMContextRef which is dropped and recreated in order
to release all types. Dropping and recreating incurs overhead,
so it will be done only after 100 queries. This is a heuristic
which might be revisited, but until we can get the size of the
context from LLVM we are flying a bit blind.
This issue has been reported several times, there may be more
references to it in the archives on top of the threads linked
below.
This is a backpatch of 9dce22033d5 to all supported branches.
Reported-By: Justin Pryzby <pryzby@telsasoft.com>
Reported-By: Kurt Roeckx <kurt@roeckx.be>
Reported-By: Jaime Casanova <jcasanov@systemguards.com.ec>
Reported-By: Lauri Laanmets <pcspets@gmail.com>
Author: Andres Freund and Daniel Gustafsson
Discussion: https://postgr.es/m/7acc8678-df5f-4923-9cf6-e843131ae89d@www.fastmail.com
Discussion: https://postgr.es/m/20201218235607.GC30237@telsasoft.com
Discussion: https://postgr.es/m/CAPH-tTxLf44s3CvUUtQpkDr1D8Hxqc2NGDzGXS1ODsfiJ6WSqA@mail.gmail.com
Backpatch-through: v12
|
|
contain_mutable_functions and contain_volatile_functions give
reliable answers only after expression preprocessing (specifically
eval_const_expressions). Some places understand this, but some did
not get the memo --- which is not entirely their fault, because the
problem is documented only in places far away from those functions.
Introduce wrapper functions that allow doing the right thing easily,
and add commentary in hopes of preventing future mistakes from
copy-and-paste of code that's only conditionally safe.
Two actual bugs of this ilk are fixed here. We failed to preprocess
column GENERATED expressions before checking mutability, so that the
code could fail to detect the use of a volatile function
default-argument expression, or it could reject a polymorphic function
that is actually immutable on the datatype of interest. Likewise,
column DEFAULT expressions weren't preprocessed before determining if
it's safe to apply the attmissingval mechanism. A false negative
would just result in an unnecessary table rewrite, but a false
positive could allow the attmissingval mechanism to be used in a case
where it should not be, resulting in unexpected initial values in a
new column.
In passing, re-order the steps in ComputePartitionAttrs so that its
checks for invalid column references are done before applying
expression_planner, rather than after. The previous coding would
not complain if a partition expression contains a disallowed column
reference that gets optimized away by constant folding, which seems
to me to be a behavior we do not want.
Per bug #18097 from Jim Keener. Back-patch to all supported versions.
Discussion: https://postgr.es/m/18097-ebb179674f22932f@postgresql.org
|
|
The fallback implementation of pg_atomic_test_set_flag() that uses
atomic-exchange gives pg_atomic_exchange_u32_impl() an extra
argument. This issue has been present since the introduction of
the atomics API in commit b64d92f1a5.
Reviewed-by: Andres Freund
Discussion: https://postgr.es/m/20231114035439.GA1809032%40nathanxps13
Backpatch-through: 12
|
|
We seem to have accidentally used "insure" in a few places. Correct
that.
Author: Peter Smith
Discussion: https://postgr.es/m/CAHut+Pv0biqrhA3pMhu40aDsj343mTsD75khKnHsLqR8P04f=Q@mail.gmail.com
Backpatch-through: 12, oldest supported version
|
|
When computing "0 - INT64_MIN", most platforms would report an
overflow error, which is correct. However, platforms without integer
overflow builtins or 128-bit integers would fail to spot the overflow,
and incorrectly return INT64_MIN.
Back-patch to all supported branches.
Patch be me. Thanks to Jian He for initial investigation, and Laurenz
Albe and Tom Lane for review.
Discussion: https://postgr.es/m/CAEZATCUNK-AZSD0jVdgkk0N%3DNcAXBWeAEX-QU9AnJPensikmdQ%40mail.gmail.com
|
|
array_set_element() and related functions allow an array to be
enlarged by assigning to subscripts outside the current array bounds.
While these places were careful to check that the new bounds are
allowable, they neglected to consider the risk of integer overflow
in computing the new bounds. In edge cases, we could compute new
bounds that are invalid but get past the subsequent checks,
allowing bad things to happen. Memory stomps that are potentially
exploitable for arbitrary code execution are possible, and so is
disclosure of server memory.
To fix, perform the hazardous computations using overflow-detecting
arithmetic routines, which fortunately exist in all still-supported
branches.
The test cases added for this generate (after patching) errors that
mention the value of MaxArraySize, which is platform-dependent.
Rather than introduce multiple expected-files, use psql's VERBOSITY
parameter to suppress the printing of the message text. v11 psql
lacks that parameter, so omit the tests in that branch.
Our thanks to Pedro Gallegos for reporting this problem.
Security: CVE-2023-5869
|
|
get_explain_guc_options() crashed if a string GUC marked GUC_EXPLAIN
has a NULL boot_val. Nosing around found a couple of other places
that seemed insufficiently cautious about NULL string values, although
those are likely unreachable in practice. Add some commentary
defining the expectations for NULL values of string variables,
in hopes of forestalling future additions of more such bugs.
Xing Guo, Aleksander Alekseev, Tom Lane
Discussion: https://postgr.es/m/CACpMh+AyDx5YUpPaAgzVwC1d8zfOL4JoD-uyFDnNSa1z0EsDQQ@mail.gmail.com
|
|
When an UPDATE/DELETE/MERGE's target table is an old-style
inheritance tree, it's possible for the parent to get excluded
from the plan while some children are not. (I believe this is
only possible if we can prove that a CHECK ... NO INHERIT
constraint on the parent contradicts the query WHERE clause,
so it's a very unusual case.) In such a case, ExecInitModifyTable
mistakenly concluded that the first surviving child is the target
table, leading to at least two bugs:
1. The wrong table's statement-level triggers would get fired.
2. In v16 and up, it was possible to fail with "invalid perminfoindex
0 in RTE with relid nnnn" due to the child RTE not having permissions
data included in the query plan. This was hard to reproduce reliably
because it did not occur unless the update triggered some non-HOT
index updates.
In v14 and up, this is easy to fix by defining ModifyTable.rootRelation
to be the parent RTE in plain inheritance as well as partitioned cases.
While the wrong-triggers bug also appears in older branches, the
relevant code in both the planner and executor is quite a bit
different, so it would take a good deal of effort to develop and
test a suitable patch. Given the lack of field complaints about the
trigger issue, I'll desist for now. (Patching v11 for this seems
unwise anyway, given that it will have no more releases after next
month.)
Per bug #18147 from Hans Buschmann.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/18147-6fc796538913ee88@postgresql.org
|
|
Commit 37d5babb used this C API function while adding support for LLVM
16 and opaque pointers, but it's not available in LLVM 7 and older.
Provide it in our own llvmjit_wrap.cpp. It just calls a C++ function
that pre-dates LLVM 3.9, our minimum target.
Back-patch to 12, like 37d5babb.
Discussion: https://postgr.es/m/CA%2BhUKGKnLnJnWrkr%3D4mSGhE5FuTK55FY15uULR7%3Dzzc%3DwX4Nqw%40mail.gmail.com
|
|
Remove use of LLVMGetElementType() and provide the type of all pointers
to LLVMBuildXXX() functions when emitting IR, as required by modern LLVM
versions[1].
* For LLVM <= 14, we'll still use the old LLVMBuildXXX() functions.
* For LLVM == 15, we'll continue to do the same, explicitly opting
out of opaque pointer mode.
* For LLVM >= 16, we'll use the new LLVMBuildXXX2() functions that take
the extra type argument.
The difference is hidden behind some new IR emitting wrapper functions
l_load(), l_gep(), l_call() etc. The change is mostly mechanical,
except that at each site the correct type had to be provided.
In some places we needed to do some extra work to get functions types,
including some new wrappers for C++ APIs that are not yet exposed by in
LLVM's C API, and some new "example" functions in llvmjit_types.c
because it's no longer possible to start from the function pointer type
and ask for the function type.
Back-patch to 12, because it's a little tricker in 11 and we agreed not
to put the latest LLVM support into the upcoming final release of 11.
[1] https://llvm.org/docs/OpaquePointers.html
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Ronan Dunklau <ronan.dunklau@aiven.io>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA%2BhUKGKNX_%3Df%2B1C4r06WETKTq0G4Z_7q4L4Fxn5WWpMycDj9Fw%40mail.gmail.com
|
|
This commit (c290e79cf0) was originally back-patched to v15.
Commit 97550c0711 added a new use of STDERR_FILENO, and it was
back-patched all the way to v11, thus breaking MSVC builds for v11
through v14. Since STDERR_FILENO is now needed on older versions,
let's back-patch c290e79cf0 down to v11, too.
Here follows the original commit message describing the change:
Because they are not available we've used _fileno(stdin) in some places, but
that doesn't reliably work, because stdin might be closed. This is the
prerequisite of the subsequent commit, fixing a failure introduced in
76e38b37a5.
Author: Andres Freund <andres@anarazel.de>
Reported-By: Sandeep Thakkar <sandeep.thakkar@enterprisedb.com>
Message-Id: 20220520164558.ozb7lm6unakqzezi@alap3.anarazel.de (on pgsql-packagers)
Discussion: https://postgr.es/m/20231017164517.GA613565%40nathanxps13
Backpatch-through: 11
|
|
The SIGTERM handler for the startup process immediately calls
proc_exit() for the duration of the restore_command, i.e., a call
to system(). This system() call forks a new process to execute the
shell command, and this child process inherits the parent's signal
handlers. If both the parent and child processes receive SIGTERM,
both will attempt to call proc_exit(). This can end badly. For
example, both processes will try to remove themselves from the
PGPROC shared array.
To fix this problem, this commit adds a check in
StartupProcShutdownHandler() to see whether MyProcPid == getpid().
If they match, this is the parent process, and we can proc_exit()
like before. If they do not match, this is a child process, and we
just emit a message to STDERR (in a signal safe manner) and
_exit(), thereby skipping any problematic exit callbacks.
This commit also adds checks in proc_exit(), ProcKill(), and
AuxiliaryProcKill() that verify they are not being called within
such child processes.
Suggested-by: Andres Freund
Reviewed-by: Thomas Munro, Andres Freund
Discussion: https://postgr.es/m/Y9nGDSgIm83FHcad%40paquier.xyz
Discussion: https://postgr.es/m/20230223231503.GA743455%40nathanxps13
Backpatch-through: 11
|
|
Under interval_ops, some equal values are distinguishable. One such
pair is '24:00:00' and '1 day'. With that being so, btequalimage()
breaches the documented contract for the "equalimage" btree support
function. This can cause incorrect results from index-only scans.
Users should REINDEX any btree indexes having interval-type columns.
After updating, pg_amcheck will report an error for almost all such
indexes. This fix makes interval_ops simply omit the support function,
like numeric_ops does. Back-pack to v13, where btequalimage() first
appeared. In back branches, for the benefit of old catalog content,
btequalimage() code will return false for type "interval". Going
forward, back-branch initdb will include the catalog change.
Reviewed by Peter Geoghegan.
Discussion: https://postgr.es/m/20231011013317.22.nmisch@google.com
|
|
nbtree's mark/restore processing failed to correctly handle an edge case
involving array key advancement and related search-type scan key state.
Scans with ScalarArrayScalarArrayOpExpr quals requiring mark/restore
processing (for a merge join) could incorrectly conclude that an
affected array/scan key must not have advanced during the time between
marking and restoring the scan's position.
As a result of all this, array key handling within btrestrpos could skip
a required call to _bt_preprocess_keys(). This confusion allowed later
primitive index scans to overlook tuples matching the true current array
keys. The scan's search-type scan keys would still have spurious values
corresponding to the final array element(s) -- not values matching the
first/now-current array element(s).
To fix, remember that "array key wraparound" has taken place during the
ongoing btrescan in a flag variable stored in the scan's state, and use
that information at the point where btrestrpos decides if another call
to _bt_preprocess_keys is required.
Oversight in commit 70bc5833, which taught nbtree to handle array keys
during mark/restore processing, but missed this subtlety. That commit
was itself a bug fix for an issue in commit 9e8da0f7, which taught
nbtree to handle ScalarArrayOpExpr quals natively.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkgP3DDRJxw6DgjCxo-cu-DKrvjEv_ArkP2ctBJatDCYg@mail.gmail.com
Backpatch: 11- (all supported branches).
|
|
Revalidation of a plancache entry (after a cache invalidation event)
requires acquiring a snapshot. Normally that is harmless, but not
if the cached statement is one that needs to run without acquiring a
snapshot. We were already aware of that for TransactionStmts,
but for some reason hadn't extrapolated to the other statements that
PlannedStmtRequiresSnapshot() knows mustn't set a snapshot. This can
lead to unexpected failures of commands such as SET TRANSACTION
ISOLATION LEVEL. We can fix it in the same way, by excluding those
command types from revalidation.
However, we can do even better than that: there is no need to
revalidate for any statement type for which parse analysis, rewrite,
and plan steps do nothing interesting, which is nearly all utility
commands. To mechanize this, invent a parser function
stmt_requires_parse_analysis() that tells whether parse analysis does
anything beyond wrapping a CMD_UTILITY Query around the raw parse
tree. If that's what it does, then rewrite and plan will just
skip the Query, so that it is not possible for the same raw parse
tree to produce a different plan tree after cache invalidation.
stmt_requires_parse_analysis() is basically equivalent to the
existing function analyze_requires_snapshot(), except that for
obscure reasons that function omits ReturnStmt and CallStmt.
It is unclear whether those were oversights or intentional.
I have not been able to demonstrate a bug from not acquiring a
snapshot while analyzing these commands, but at best it seems mighty
fragile. It seems safer to acquire a snapshot for parse analysis of
these commands too, which allows making stmt_requires_parse_analysis
and analyze_requires_snapshot equivalent.
In passing this fixes a second bug, which is that ResetPlanCache
would exclude ReturnStmts and CallStmts from revalidation.
That's surely *not* safe, since they contain parsable expressions.
Per bug #18059 from Pavel Kulakov. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18059-79c692f036b25346@postgresql.org
|
|
Commit e7cb7ee14 allowed custom scan providers to create CustomPath
paths for join relations as well, but missed updating the comments.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAPmGK15ODkN%2B%3DhkBCufj1HBW0x5OTb65Xuy7ryXchMdiCMpx_g%40mail.gmail.com
|
|
Commit e7cb7ee14, which introduced the infrastructure for FDWs and
custom scan providers to replace joins with scans, failed to add support
handling of pseudoconstant quals assigned to replaced joins in
createplan.c, leading to an incorrect plan without a gating Result node
when postgres_fdw replaced a join with such a qual.
To fix, we could add the support by 1) modifying the ForeignPath and
CustomPath structs to store the list of RestrictInfo nodes to apply to
the join, as in JoinPaths, if they represent foreign and custom scans
replacing a join with a scan, and by 2) modifying create_scan_plan() in
createplan.c to use that list in that case, instead of the
baserestrictinfo list, to get pseudoconstant quals assigned to the join;
but #1 would cause an ABI break. So fix by modifying the infrastructure
to just disallow replacing joins with such quals.
Back-patch to all supported branches.
Reported by Nishant Sharma. Patch by me, reviewed by Nishant Sharma and
Richard Guo.
Discussion: https://postgr.es/m/CADrsxdbcN1vejBaf8a%2BQhrZY5PXL-04mCd4GDu6qm6FigDZd6Q%40mail.gmail.com
|
|
Until now, when DROP DATABASE got interrupted in the wrong moment, the removal
of the pg_database row would also roll back, even though some irreversible
steps have already been taken. E.g. DropDatabaseBuffers() might have thrown
out dirty buffers, or files could have been unlinked. But we continued to
allow connections to such a corrupted database.
To fix this, mark databases invalid with an in-place update, just before
starting to perform irreversible steps. As we can't add a new column in the
back branches, we use pg_database.datconnlimit = -2 for this purpose.
An invalid database cannot be connected to anymore, but can still be
dropped.
Unfortunately we can't easily add output to psql's \l to indicate that some
database is invalid, it doesn't fit in any of the existing columns.
Add tests verifying that a interrupted DROP DATABASE is handled correctly in
the backend and in various tools.
Reported-by: Evgeny Morozov <postgresql3@realityexists.net>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20230509004637.cgvmfwrbht7xm7p6@awork3.anarazel.de
Discussion: https://postgr.es/m/20230314174521.74jl6ffqsee5mtug@awork3.anarazel.de
Backpatch: 11-, bug present in all supported versions
|
|
Also add comment to make the reasoning behind the Assert() more explicit (per
Tom).
Reported-by: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAocXNJ6s1VLz+hMamLAQAiewRoW17OJ6-+9GACKfj6iPQ@mail.gmail.com
Backpatch: 11-
|
|
The idea of EvalPlanQual is that we replace the query's scan of the
result relation with a single injected tuple, and see if we get a
tuple out, thereby implying that the injected tuple still passes the
query quals. (In join cases, other relations in the query are still
scanned normally.) This logic was not updated when commit 86dc90056
made it possible for a single DML query plan to have multiple result
relations, when the query target relation has inheritance or partition
children. We replaced the output for the current result relation
successfully, but other result relations were still scanned normally;
thus, if any other result relation contained a tuple satisfying the
quals, we'd think the EPQ check passed, even if it did not pass for
the injected tuple itself. This would lead to update or delete
actions getting performed when they should have been skipped due to
a conflicting concurrent update in READ COMMITTED isolation mode.
Fix by blocking all sibling result relations from emitting tuples
during an EvalPlanQual recheck. In the back branches, the fix is
complicated a bit by the need to not change the size of struct
EPQState (else we'd have ABI-breaking changes in offsets in
struct ModifyTableState). Like the back-patches of 3f7836ff6
and 4b3e37993, add a separately palloc'd struct to avoid that.
The logic is the same as in HEAD otherwise.
This is only a live bug back to v14 where 86dc90056 came in.
However, I chose to back-patch the test cases further, on the
grounds that this whole area is none too well tested. I skipped
doing so in v11 though because none of the test applied cleanly,
and it didn't quite seem worth extra work for a branch with only
six months to live.
Per report from Ante Krešić (via Aleksander Alekseev)
Discussion: https://postgr.es/m/CAJ7c6TMBTN3rcz4=AjYhLPD_w3FFT0Wq_C15jxCDn8U4tZnH1g@mail.gmail.com
|
|
Non-leaf pages of GiST indexes contain key attributes, leaf pages
contain both key and non-key attributes, and gist_page_items() ignored
the handling of non-key attributes. This caused a few problems when
using gist_page_items() on a GiST index with INCLUDE:
- On a non-leaf page, the function would crash.
- On a leaf page, the function would work, but miss to display all the
values for included attributes.
This commit fixes gist_page_items() to handle such cases in a more
appropriate way, and now displays the values of key and non-key
attributes for each item separately in a style consistent with what
ruleutils.c would generate for the attribute list, depending on the page
type dealt with. In a way similar to how a record is displayed, values
would be double-quoted for key or non-key attributes if required.
ruleutils.c did not provide a routine able to control if non-key
attributes should be displayed, so an extended() routine for index
definitions is added to work around the leaf and non-leaf page
differences.
While on it, this commit fixes a third problem related to the amount of
data reported for key attributes. The code originally relied on
BuildIndexValueDescription() (used for error reports on constraints)
that would not print all the data stored in the index but the index
opclass's input type, so this limited the amount of information
available. This switch makes gist_page_items() much cheaper as there is
no need to run ACL checks for each item printed, which is not an issue
anyway as superuser rights are required to execute the functions of
pageinspect. Opclasses whose data cannot be displayed can rely on
gist_page_items_bytea().
The documentation of this function was slightly incorrect for the
output results generated on HEAD and v15, so adjust it on these
branches.
Author: Alexander Lakhin, Michael Paquier
Discussion: https://postgr.es/m/17884-cb8c326522977acb@postgresql.org
Backpatch-through: 14
|
|
BRIN indexes did not properly distinguish between summaries for empty
(no rows) and all-NULL ranges, treating them as essentially the same
thing. Summaries were initialized with allnulls=true, and opclasses
simply reset allnulls to false when processing the first non-NULL value.
This however produces incorrect results if the range starts with a NULL
value (or a sequence of NULL values), in which case we forget the range
contains NULL values when adding the first non-NULL value.
This happens because the allnulls flag is used for two separate
purposes - to mark empty ranges (not representing any rows yet) and
ranges containing only NULL values.
Opclasses don't know which of these cases it is, and so don't know
whether to set hasnulls=true. Setting the flag in both cases would make
it correct, but it would also make BRIN indexes useless for queries with
IS NULL clauses. All ranges start empty (and thus allnulls=true), so all
ranges would end up with either allnulls=true or hasnulls=true.
The severity of the issue is somewhat reduced by the fact that it only
happens when adding values to an existing summary with allnulls=true.
This can happen e.g. for small tables (because a summary for the first
range exists for all BRIN indexes), or for tables with large fraction of
NULL values in the indexed columns.
Bulk summarization (e.g. during CREATE INDEX or automatic summarization)
that processes all values at once is not affected by this issue. In this
case the flags were updated in a slightly different way, not forgetting
the NULL values.
To identify empty ranges we use a new flag, stored in an unused bit in
the BRIN tuple header so the on-disk format remains the same. A matching
flag is added to BrinMemTuple, into a 3B gap after bt_placeholder.
That means there's no risk of ABI breakage, although we don't actually
pass the BrinMemTuple to any public API.
We could also skip storing index tuples for empty summaries, but then
we'd have to always process such ranges - even if there are no rows in
large parts of the table (e.g. after a bulk DELETE), it would still
require reading the pages etc. So we store them, but ignore them when
building the bitmap.
Backpatch to 11. The issue exists since BRIN indexes were introduced in
9.5, but older releases are already EOL.
Backpatch-through: 11
Reviewed-by: Justin Pryzby, Matthias van de Meent, Alvaro Herrera
Discussion: https://postgr.es/m/402430e4-7d9d-6cf1-09ef-464d80afff3b@enterprisedb.com
|
|
CREATE SCHEMA AUTHORIZATION with appended schema elements can lead to
crashes when comparing the schema name of the query with the schemas
used in the qualification of some clauses in the elements' queries.
The origin of the problem is that the transformation routine for the
elements listed in a CREATE SCHEMA query uses as new, expected, schema
name the one listed in CreateSchemaStmt itself. However, depending on
the query, CreateSchemaStmt.schemaname may be NULL, being computed
instead from the role specification of the query given by the
AUTHORIZATION clause, that could be either:
- A user name string, with the new schema name being set to the same
value as the role given.
- Guessed from CURRENT_ROLE, SESSION_ROLE or CURRENT_ROLE, with a new
schema name computed from the security context where CREATE SCHEMA is
running.
Regression tests are added for CREATE SCHEMA with some appended elements
(some of them with schema qualifications), covering also some role
specification patterns.
While on it, this simplifies the context structure used during the
transformation of the elements listed in a CREATE SCHEMA query by
removing the fields for the role specification and the role type. They
were not used, and for the role specification this could be confusing as
the schema name may by extracted from that at the beginning of
CreateSchemaCommand().
This issue exists for a long time, so backpatch down to all the versions
supported.
Reported-by: Song Hongyu
Author: Michael Paquier
Reviewed-by: Richard Guo
Discussion: https://postgr.es/m/17909-f65c12dfc5f0451d@postgresql.org
Backpatch-through: 11
|
|
Calling fseek() or ftello() on a handle to a non-seeking device such as
a pipe or a communications device is not supported. Unfortunately,
MSVC's flavor of these routines, _fseeki64() and _ftelli64(), do not
return an error when given a pipe as handle. Some of the logic of
pg_dump and restore relies on these routines to check if a handle is
seekable, causing failures when passing the contents of pg_dump to
pg_restore through a pipe, for example.
This commit introduces wrappers for fseeko() and ftello() on MSVC so as
any callers are able to properly detect the cases of non-seekable
handles. This relies mainly on GetFileType(), sharing a bit of code
with the MSVC port for fstat(). The code in charge of getting a file
type is refactored into a new file called win32common.c, shared by
win32stat.c and the new win32fseek.c. It includes the MSVC ports for
fseeko() and ftello().
Like 765f5df, this is backpatched down to 14, where the fstat()
implementation for MSVC is able to understand about files larger than
4GB in size. Using a TAP test for that is proving to be tricky as
IPC::Run handles the pipes by itself, still I have been able to check
the fix manually.
Reported-by: Daniel Watzinger
Author: Juan José Santamaría Flecha, Michael Paquier
Discussion: https://postgr.es/m/CAC+AXB26a4EmxM2suXxPpJaGrqAdxracd7hskLg-zxtPB50h7A@mail.gmail.com
Backpatch-through: 14
|
|
With unlucky timing and parallel_leader_participation=off (not the
default), PHJ could attempt to access per-batch shared state just as it
was being freed. There was code intended to prevent that by checking
for a cleared pointer, but it was racy. Fix, by introducing an extra
barrier phase. The new phase PHJ_BUILD_RUNNING means that it's safe to
access the per-batch state to find a batch to help with, and
PHJ_BUILD_DONE means that it is too late. The last to detach will free
the array of per-batch state as before, but now it will also atomically
advance the phase, so that late attachers can avoid the hazard. This
mirrors the way per-batch hash tables are freed (see phases
PHJ_BATCH_PROBING and PHJ_BATCH_DONE).
An earlier attempt to fix this (commit 3b8981b6, later reverted) missed
one special case. When the inner side is empty (the "empty inner
optimization), the build barrier would only make it to
PHJ_BUILD_HASHING_INNER phase before workers attempted to detach from
the hashtable. In that case, fast-forward the build barrier to
PHJ_BUILD_RUNNING before proceeding, so that our later assertions hold
and we can still negotiate who is cleaning up.
Revealed by build farm failures, where BarrierAttach() failed a sanity
check assertion, because the memory had been clobbered by dsa_free().
In non-assert builds, the result could be a segmentation fault.
Back-patch to all supported releases.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Michael Paquier <michael@paquier.xyz>
Reported-by: David Geier <geidav.pg@gmail.com>
Tested-by: David Geier <geidav.pg@gmail.com>
Discussion: https://postgr.es/m/20200929061142.GA29096%40paquier.xyz
|
|
We already tried to fix this in commits 3f7323cbb et al (and follow-on
fixes), but now it emerges that there are still unfixed cases;
moreover, these cases affect all branches not only pre-v14. I thought
we had eliminated all cases of making multiple clones of an UPDATE's
target list when we nuked inheritance_planner. But it turns out we
still do that in some partitioned-UPDATE cases, notably including
INSERT ... ON CONFLICT UPDATE, because ExecInitPartitionInfo thinks
it's okay to clone and modify the parent's targetlist.
This fix is based on a suggestion from Andres Freund: let's stop
abusing the ParamExecData.execPlan mechanism, which was only ever
meant to handle initplans, and instead solve the execution timing
problem by having the expression compiler move MULTIEXPR_SUBLINK steps
to the front of their expression step lists. This is feasible because
(a) all branches still in support compile the entire targetlist of
an UPDATE into a single ExprState, and (b) we know that all
MULTIEXPR_SUBLINKs do need to be evaluated --- none could be buried
inside a CASE, for example. There is a minor semantics change
concerning the order of execution of the MULTIEXPR's subquery versus
other parts of the parent targetlist, but that seems like something
we can get away with. By doing that, we no longer need to worry
about whether different clones of a MULTIEXPR_SUBLINK share output
Params; their usage of that data structure won't overlap.
Per bug #17800 from Alexander Lakhin. Back-patch to all supported
branches. In v13 and earlier, we can revert 3f7323cbb and follow-on
fixes; however, I chose to keep the SubPlan.subLinkId field added
in ccbb54c72. We don't need that anymore in the core code, but it's
cheap enough to fill, and removing a plan node field in a minor
release seems like it'd be asking for trouble.
Andres Freund and Tom Lane
Discussion: https://postgr.es/m/17800-ff90866b3906c964@postgresql.org
|
|
OpenSSL 1.1.1 and newer versions have added support for RSA-PSS
certificates, which requires the use of a specific routine in OpenSSL to
determine which hash function to use when compiling it when using
channel binding in SCRAM-SHA-256. X509_get_signature_nid(), that is the
original routine the channel binding code has relied on, is not able to
determine which hash algorithm to use for such certificates. However,
X509_get_signature_info(), new to OpenSSL 1.1.1, is able to do it. This
commit switches the channel binding logic to rely on
X509_get_signature_info() over X509_get_signature_nid(), which would be
the choice when building with 1.1.1 or newer.
The error could have been triggered on the client or the server, hence
libpq and the backend need to have their related code paths patched.
Note that attempting to load an RSA-PSS certificate with OpenSSL 1.1.0
or older leads to a failure due to an unsupported algorithm.
The discovery of relying on X509_get_signature_info() comes from Jacob,
the tests have been written by Heikki (with few tweaks from me), while I
have bundled the whole together while adding the bits needed for MSVC
and meson.
This issue exists since channel binding exists, so backpatch all the way
down. Some tests are added in 15~, triggered if compiling with OpenSSL
1.1.1 or newer, where the certificate and key files can easily be
generated for RSA-PSS.
Reported-by: Gunnar "Nick" Bluth
Author: Jacob Champion, Heikki Linnakangas
Discussion: https://postgr.es/m/17760-b6c61e752ec07060@postgresql.org
Backpatch-through: 11
|
|
Try to disable ASLR when building in EXEC_BACKEND mode, to avoid random
memory mapping failures while testing. For developer use only, no
effect on regular builds.
This has been originally applied as of f3e7806 for v15~, but
recently-added buildfarm member gokiburi tests this configuration on
older branches as well, causing it to fail randomly as ASLR would be
enabled.
Suggested-by: Andres Freund <andres@anarazel.de>
Tested-by: Bossart, Nathan <bossartn@amazon.com>
Discussion: https://postgr.es/m/20210806032944.m4tz7j2w47mant26%40alap3.anarazel.de
Backpatch-through: 12
|
|
Add "#ifndef FRONTEND" where necessary to make pg_waldump build
on compilers that don't elide unused static-inline functions.
This back-patches relevant parts of commit 3e9ca5260, fixing build
breakage from dc7420c2c and back-patching of f10f0ae42.
Per recently-resurrected buildfarm member castoroides. We aren't
expecting castoroides to build anything newer than v11, but we
might as well clean up the intermediate branches while at it.
|
|
In commit 8bf6ec3ba I assumed that no code path could reach
ExecGetExtraUpdatedCols without having gone through
ExecInitStoredGenerated. That turns out not to be the case in
logical replication: if there's an ON UPDATE trigger on the target
table, trigger.c will call this code before anybody has set up its
generated columns. Having seen that, I don't have a lot of faith in
there not being other such paths. ExecGetExtraUpdatedCols can call
ExecInitStoredGenerated for itself, as long as we are willing to
assume that it is only called in CMD_UPDATE operations, which on
the whole seems like a safer leap of faith.
Per report from Vitaly Davydov.
Discussion: https://postgr.es/m/d259d69652b8c2ff50e14cda3c236c7f@postgrespro.ru
|
|
We were identifying the updatable generated columns of inheritance
children by transposing the calculation made for their parent.
However, there's nothing that says a traditional-inheritance child
can't have generated columns that aren't there in its parent, or that
have different dependencies than are in the parent's expression.
(At present it seems that we don't enforce that for partitioning
either, which is likely wrong to some degree or other; but the case
clearly needs to be handled with traditional inheritance.)
Hence, drop the very-klugy-anyway "extraUpdatedCols" RTE field
in favor of identifying which generated columns depend on updated
columns during executor startup. In HEAD we can remove
extraUpdatedCols altogether; in back branches, it's still there but
always empty. Another difference between the HEAD and back-branch
versions of this patch is that in HEAD we can add the new bitmap field
to ResultRelInfo, but that would cause an ABI break in back branches.
Like 4b3e37993, add a List field at the end of struct EState instead.
Back-patch to v13. The bogus calculation is also being made in v12,
but it doesn't have the same visible effect because we don't use it
to decide which generated columns to recalculate; as a consequence of
which the patch doesn't apply easily. I think that there might still
be a demonstrable bug associated with trigger firing conditions, but
that's such a weird corner-case usage that I'm content to leave it
unfixed in v12.
Amit Langote and Tom Lane
Discussion: https://postgr.es/m/CA+HiwqFshLKNvQUd1DgwJ-7tsTp=dwv7KZqXC4j2wYBV1aCDUA@mail.gmail.com
Discussion: https://postgr.es/m/2793383.1672944799@sss.pgh.pa.us
|
|
New versions of perl trigger warnings within perl.h with our compiler
flags. At least -Wdeclaration-after-statement, -Wshadow=compatible-local are
known to be problematic.
To avoid these warnings, conditionally use #pragma GCC system_header before
including plperl.h.
Alternatively, we could add the include paths for problematic headers with
-isystem, but that is a larger hammer and is harder to search for.
A more granular alternative would be to use #pragma GCC diagnostic
push/ignored/pop, but gcc warns about unknown warnings being ignored, so every
to-be-ignored-temporarily compiler warning would require its own pg_config.h
symbol and #ifdef.
As the warnings are voluminous, it makes sense to backpatch this change. But
don't do so yet, we first want gather buildfarm coverage - it's e.g. possible
that some compiler claiming to be gcc compatible has issues with the pragma.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: Discussion: https://postgr.es/m/20221228182455.hfdwd22zztvkojy2@awork3.anarazel.de
|
|
Commits f92944137 et al. made IsInTransactionBlock() set the
XACT_FLAGS_NEEDIMMEDIATECOMMIT flag before returning "false",
on the grounds that that kept its API promises equivalent to those of
PreventInTransactionBlock(). This turns out to be a bad idea though,
because it allows an ANALYZE in a pipelined series of commands to
cause an immediate commit, which is unexpected.
Furthermore, if we return "false" then we have another issue,
which is that ANALYZE will decide it's allowed to do internal
commit-and-start-transaction sequences, thus possibly unexpectedly
committing the effects of previous commands in the pipeline.
To fix the latter situation, invent another transaction state flag
XACT_FLAGS_PIPELINING, which explicitly records the fact that we
have executed some extended-protocol command and not yet seen a
commit for it. Then, require that flag to not be set before allowing
InTransactionBlock() to return "false".
Having done that, we can remove its setting of NEEDIMMEDIATECOMMIT
without fear of causing problems. This means that the API guarantees
of IsInTransactionBlock now diverge from PreventInTransactionBlock,
which is mildly annoying, but it seems OK given the very limited usage
of IsInTransactionBlock. (In any case, a caller preferring the old
behavior could always set NEEDIMMEDIATECOMMIT for itself.)
For consistency also require XACT_FLAGS_PIPELINING to not be set
in PreventInTransactionBlock. This too is meant to prevent commands
such as CREATE DATABASE from silently committing previous commands
in a pipeline.
Per report from Peter Eisentraut. As before, back-patch to all
supported branches (which sadly no longer includes v10).
Discussion: https://postgr.es/m/65a899dd-aebc-f667-1d0a-abb89ff3abf8@enterprisedb.com
|
|
In commit ffbb7e65a, I added a ModifyTableState member to ResultRelInfo
to save the owning ModifyTableState for use by nodeModifyTable.c when
performing batch inserts, but as pointed out by Tom Lane, that changed
the array stride of es_result_relations, and that would break any
previously-compiled extension code that accesses that array. Fix by
removing that member from ResultRelInfo and instead adding a List member
at the end of EState to save such ModifyTableStates.
Per report from Tom Lane. Back-patch to v14, like the previous commit;
I chose to apply the patch to HEAD as well, to make back-patching easy.
Discussion: http://postgr.es/m/4065383.1669395453%40sss.pgh.pa.us
|
|
A couple of places weren't up to speed for this. By sheer good
luck, we didn't fail but just selected a non-memoized join plan,
at least in the test case we have. Nonetheless, it's a bug,
and I'm not quite sure that it couldn't have worse consequences
in other examples. So back-patch to v14 where Memoize came in.
Richard Guo
Discussion: https://postgr.es/m/CAMbWs48GkNom272sfp0-WeD6_0HSR19BJ4H1c9ZKSfbVnJsvRg@mail.gmail.com
|
|
Previously, we'd compress only when the active range of array entries
reached Max(4 * PROCARRAY_MAXPROCS, 2 * pArray->numKnownAssignedXids).
If max_connections is large, the first term could result in not
compressing for a long time, resulting in much wastage of cycles in
hot-standby backends scanning the array to take snapshots. Get rid
of that term, and just bound it to 2 * pArray->numKnownAssignedXids.
That however creates the opposite risk, that we might spend too much
effort compressing. Hence, consider compressing only once every 128
commit records. (This frequency was chosen by benchmarking. While
we only tried one benchmark scenario, the results seem stable over
a fairly wide range of frequencies.)
Also, force compression when processing RecoveryInfo WAL records
(which should be infrequent); the old code could perform compression
then, but would do so only after the same array-range check as for
the transaction-commit path.
Also, opportunistically run compression if the startup process is about
to wait for WAL, though not oftener than once a second. This should
prevent cases where we waste lots of time by leaving the array
not-compressed for long intervals due to low WAL traffic.
Lastly, add a simple check to keep us from uselessly compressing
when the array storage is already compact.
Back-patch, as the performance problem is worse in pre-v14 branches
than in HEAD.
Simon Riggs and Michail Nikolaev, with help from Tom Lane and
Andres Freund.
Discussion: https://postgr.es/m/CALdSSPgahNUD_=pB_j=1zSnDBaiOtqVfzo8Ejt5J_k7qZiU1Tw@mail.gmail.com
|
|
Commit b663a4136, which allowed FDWs to INSERT rows in bulk, added to
nodeModifyTable.c code to flush pending inserts to the foreign-table
result relation(s) before completing processing of the ModifyTable node,
but the code failed to take into account the case where the INSERT query
has modifying CTEs, leading to incorrect results.
Also, that commit failed to flush pending inserts before firing BEFORE
ROW triggers so that rows are visible to such triggers.
In that commit we scanned through EState's
es_tuple_routing_result_relations or es_opened_result_relations list to
find the foreign-table result relations to which pending inserts are
flushed, but that would be inefficient in some cases. So to fix, 1) add
a List member to EState to record the insert-pending result relations,
and 2) modify nodeModifyTable.c so that it adds the foreign-table result
relation to the list in ExecInsert() if appropriate, and flushes pending
inserts properly using the list where needed.
While here, fix a copy-and-pasteo in a comment in ExecBatchInsert(),
which was added by that commit.
Back-patch to v14 where that commit appeared.
Discussion: https://postgr.es/m/CAPmGK16qutyCmyJJzgQOhfBq%3DNoGDqTB6O0QBZTihrbqre%2BoxA%40mail.gmail.com
|
|
I just spent an annoying amount of time reverse-engineering the
100%-undocumented API between ts_headline and the text search
parser's prsheadline function. Add some commentary about that
while it's fresh in mind. Also remove some unused macros in
wparser_def.c.
While at it, I noticed that when commit 78e73e875 added a
CHECK_FOR_INTERRUPTS call in TS_execute_recurse, it missed
doing so in the parallel function TS_phrase_execute, which
surely needs one just as much.
Back-patch because of the missing CHECK_FOR_INTERRUPTS.
Might as well back-patch the rest of this too.
|
|
This is a back-patch of the v15-era commit f10f0ae42 into older
supported branches. The idea is to design out bugs in which an
ill-timed relcache flush clears rel->rd_smgr partway through
some code sequence that wasn't expecting that. We had another
report today of a corner case that reliably crashes v14 under
debug_discard_caches (nee CLOBBER_CACHE_ALWAYS), and therefore
would crash once in a blue moon in the field. We're unlikely
to get rid of all such code paths unless we adopt the more
rigorous coding rules instituted by f10f0ae42. Therefore,
even though this is a bit invasive, it's time to back-patch.
Some comfort can be taken in the fact that f10f0ae42 has been
in v15 for 16 months without problems.
I left the RelationOpenSmgr macro present in the back branches,
even though no core code should use it anymore, in order to not break
third-party extensions in minor releases. Such extensions might opt
to start using RelationGetSmgr instead, to reduce their code
differential between v15 and earlier branches. This carries a hazard
of failing to compile against headers from existing minor releases.
However, once compiled the extension should work fine even with such
releases, because RelationGetSmgr is a "static inline" function so
it creates no link-time dependency. So depending on distribution
practices, that might be an OK tradeoff.
Per report from Spyridon Dimitrios Agathos. Original patch
by Amul Sul.
Discussion: https://postgr.es/m/CAFM5RaqdgyusQvmWkyPYaWMwoK5gigdtW-7HcgHgOeAw7mqJ_Q@mail.gmail.com
Discussion: https://postgr.es/m/CANiYTQsU7yMFpQYnv=BrcRVqK_3U3mtAzAsJCaqtzsDHfsUbdQ@mail.gmail.com
|
|
Casting the result of palloc etc. to the intended type is more per
project style anyway.
(The fact that cpluspluscheck doesn't notice these problems is
because it doesn't expand any macros, which seems like a troubling
shortcoming. Don't have a good idea about improving that.)
Back-patch to v13, which is as far as the patch applies cleanly;
doesn't seem worth working harder.
David Geier
Discussion: https://postgr.es/m/aa5d88a3-71f4-3455-11cf-82de0372c941@gmail.com
|
