| Age | Commit message (Collapse) | Author |
|---|
|
Previously, CREATE TABLE IF EXIST threw an error if the schema was
nonexistent. This was done by passing 'missing_ok' to the function that
looks up the schema oid.
|
|
In the initial implementation of plan caching, we saved the active
search_path when a plan was first cached, then reinstalled that path
anytime we needed to reparse or replan. The idea of that was to try to
reselect the same referenced objects, in somewhat the same way that views
continue to refer to the same objects in the face of schema or name
changes. Of course, that analogy doesn't bear close inspection, since
holding the search_path fixed doesn't cope with object drops or renames.
Moreover sticking with the old path seems to create more surprises than
it avoids. So instead of doing that, consider that the cached plan depends
on search_path, and force reparse/replan if the active search_path is
different than it was when we last saved the plan.
This gets us fairly close to having "transparency" of plan caching, in the
sense that the cached statement acts the same as if you'd just resubmitted
the original query text for another execution. There are still some corner
cases where this fails though: a new object added in the search path
schema(s) might capture a reference in the query text, but we'd not realize
that and force a reparse. We might try to fix that in the future, but for
the moment it looks too expensive and complicated.
|
|
This ensures that mapping of non-ascii prompts
to the correct code page occurs.
Bug report and original patch from Alexander Law,
reviewed and reworked by Noah Misch.
Backpatch to all live branches.
|
|
Tuples marked SELECT FOR UPDATE in a cluster that's later processed by
pg_upgrade would have a different infomask bit pattern than those
produced by 9.3dev; that bit pattern was being seen as "dead" by HEAD
(because they would fail the "is this tuple locked" test, and so the
visibility rules would thing they're updated, even though there's no
HEAP_UPDATED version of them). In other words, some rows could silently
disappear after pg_upgrade.
With this new definition, those tuples become visible again.
This is breakage resulting from my commit 0ac5ad5134.
|
|
This patch introduces two additional lock modes for tuples: "SELECT FOR
KEY SHARE" and "SELECT FOR NO KEY UPDATE". These don't block each
other, in contrast with already existing "SELECT FOR SHARE" and "SELECT
FOR UPDATE". UPDATE commands that do not modify the values stored in
the columns that are part of the key of the tuple now grab a SELECT FOR
NO KEY UPDATE lock on the tuple, allowing them to proceed concurrently
with tuple locks of the FOR KEY SHARE variety.
Foreign key triggers now use FOR KEY SHARE instead of FOR SHARE; this
means the concurrency improvement applies to them, which is the whole
point of this patch.
The added tuple lock semantics require some rejiggering of the multixact
module, so that the locking level that each transaction is holding can
be stored alongside its Xid. Also, multixacts now need to persist
across server restarts and crashes, because they can now represent not
only tuple locks, but also tuple updates. This means we need more
careful tracking of lifetime of pg_multixact SLRU files; since they now
persist longer, we require more infrastructure to figure out when they
can be removed. pg_upgrade also needs to be careful to copy
pg_multixact files over from the old server to the new, or at least part
of multixact.c state, depending on the versions of the old and new
servers.
Tuple time qualification rules (HeapTupleSatisfies routines) need to be
careful not to consider tuples with the "is multi" infomask bit set as
being only locked; they might need to look up MultiXact values (i.e.
possibly do pg_multixact I/O) to find out the Xid that updated a tuple,
whereas they previously were assured to only use information readily
available from the tuple header. This is considered acceptable, because
the extra I/O would involve cases that would previously cause some
commands to block waiting for concurrent transactions to finish.
Another important change is the fact that locking tuples that have
previously been updated causes the future versions to be marked as
locked, too; this is essential for correctness of foreign key checks.
This causes additional WAL-logging, also (there was previously a single
WAL record for a locked tuple; now there are as many as updated copies
of the tuple there exist.)
With all this in place, contention related to tuples being checked by
foreign key rules should be much reduced.
As a bonus, the old behavior that a subtransaction grabbing a stronger
tuple lock than the parent (sub)transaction held on a given tuple and
later aborting caused the weaker lock to be lost, has been fixed.
Many new spec files were added for isolation tester framework, to ensure
overall behavior is sane. There's probably room for several more tests.
There were several reviewers of this patch; in particular, Noah Misch
and Andres Freund spent considerable time in it. Original idea for the
patch came from Simon Riggs, after a problem report by Joel Jacobson.
Most code is from me, with contributions from Marti Raudsepp, Alexander
Shulgin, Noah Misch and Andres Freund.
This patch was discussed in several pgsql-hackers threads; the most
important start at the following message-ids:
AANLkTimo9XVcEzfiBR-ut3KVNDkjm2Vxh+t8kAmWjPuv@mail.gmail.com
1290721684-sup-3951@alvh.no-ip.org
1294953201-sup-2099@alvh.no-ip.org
1320343602-sup-2290@alvh.no-ip.org
1339690386-sup-8927@alvh.no-ip.org
4FE5FF020200002500048A3D@gw.wicourts.gov
4FEAB90A0200002500048B7D@gw.wicourts.gov
|
|
|
|
When a standby server follows the master using WAL archive, and it chooses
a new timeline (recovery_target_timeline='latest'), it only fetches the
timeline history file for the chosen target timeline, not any other history
files that might be missing from pg_xlog. For example, if the current
timeline is 2, and we choose 4 as the new recovery target timeline, the
history file for timeline 3 is not fetched, even if it's part of this
server's history. That's enough for the standby itself - the history file
for timeline 4 includes timeline 3 as well - but if a cascading standby
server wants to recover to timeline 3, it needs the history file. To fix,
when a new recovery target timeline is chosen, try to copy any missing
history files from the archive to pg_xlog between the old and new target
timeline.
A second similar issue was with the WAL files. When a standby recovers from
archive, and it reaches a segment that contains a switch to a new timeline,
recovery fetches only the WAL file labelled with the new timeline's ID. The
file from the new timeline contains a copy of the WAL from the old timeline
up to the point where the switch happened, and recovery recovers it from the
new file. But in streaming replication, walsender only tries to read it
from the old timeline's file. To fix, change walsender to read it from the
new file, so that it behaves the same as recovery in that sense, and doesn't
try to open the possibly nonexistent file with the old timeline's ID.
|
|
Originally we didn't bother to mark FuncExprs with any indication whether
VARIADIC had been given in the source text, because there didn't seem to be
any need for it at runtime. However, because we cannot fold a VARIADIC ANY
function's arguments into an array (since they're not necessarily all the
same type), we do actually need that information at runtime if VARIADIC ANY
functions are to respond unsurprisingly to use of the VARIADIC keyword.
Add the missing field, and also fix ruleutils.c so that VARIADIC ANY
function calls are dumped properly.
Extracted from a larger patch that also fixes concat() and format() (the
only two extant VARIADIC ANY functions) to behave properly when VARIADIC is
specified. This portion seems appropriate to review and commit separately.
Pavel Stehule
|
|
Dimitri Fontaine, with slight changes by me
|
|
Remove duplicate implementations of catalog munging and miscellaneous
privilege checks. Instead rely on already existing data in
objectaddress.c to do the work.
Author: KaiGai Kohei, changes by me
Reviewed by: Robert Haas, Álvaro Herrera, Dimitri Fontaine
|
|
of timeline, take advantage of that in walreceiver.
Startup process is still in control of choosign the target timeline, by
scanning the timeline history files present in pg_xlog, but walreceiver now
uses the next timeline's ID to fetch its history file immediately after it
has finished streaming the old timeline. Before, the standby would first try
to restart streaming on the old timeline, which fetches the missing timeline
history file as a side-effect, and only then restart from the new timeline.
This patch eliminates the extra iteration, which speeds up the timeline
switch and reduces the noise in the log caused by the extra restart on the
old timeline.
|
|
The xlogreader refactoring broke the logic to decide which timeline to start
streaming from. XLogPageRead() uses the timeline history to check which
timeline the requested WAL position falls into. However, after the
refactoring, XLogPageRead() is always first called with the first page in
the segment, to verify the segment header, and only then with the actual WAL
position we're interested in. That first read of the segment's header made
XLogPageRead() to always start streaming from the old timeline containing
the segment header, not the timeline containing the actual record, if there
was a timeline switch within the segment.
I thought I fixed this yesterday, but that fix was too narrow and only fixed
this for the corner-case that the timeline switch happened in the first page
of the segment. To fix this more robustly, pass explicitly the position of
the record we're actually interested in to XLogPageRead, and use that to
decide which timeline to read from, rather than deduce it from the page and
offset.
Per report from Fujii Masao.
|
|
When relations are dropped, at end of transaction we need to remove the
files and clean the buffer pool of buffers containing pages of those
relations. Previously we would scan the buffer pool once per relation
to clean up buffers. When there are many relations to drop, the
repeated scans make this process slow; so we now instead pass a list of
relations to drop and scan the pool once, checking each buffer against
the passed list. When the number of relations is larger than a
threshold (which as of this patch is being set to 20 relations) we sort
the array before starting, and bsearch the array; when it's smaller, we
simply scan the array linearly each time, because that's faster. The
exact optimal threshold value depends on many factors, but the
difference is not likely to be significant enough to justify making it
user-settable.
This has been measured to be a significant win (a 15x win when dropping
100,000 relations; an extreme case, but reportedly a real one).
Author: Tomas Vondra, some tweaks by me
Reviewed by: Robert Haas, Shigeru Hanada, Andres Freund, Álvaro Herrera
|
|
This mirrors the changes done earlier to the server in standby mode. When
receivelog reaches the end of a timeline, as reported by the server, it
fetches the timeline history file of the next timeline, and restarts
streaming from the new timeline by issuing a new START_STREAMING command.
When pg_receivexlog crosses a timeline, it leaves the .partial suffix on the
last segment on the old timeline. This helps you to tell apart a partial
segment left in the directory because of a timeline switch, and a completed
segment. If you just follow a single server, it won't make a difference, but
it can be significant in more complicated scenarios where new WAL is still
generated on the old timeline.
This includes two small changes to the streaming replication protocol:
First, when you reach the end of timeline while streaming, the server now
sends the TLI of the next timeline in the server's history to the client.
pg_receivexlog uses that as the next timeline, so that it doesn't need to
parse the timeline history file like a standby server does. Second, when
BASE_BACKUP command sends the begin and end WAL positions, it now also sends
the timeline IDs corresponding the positions.
|
|
The patch that turned XLogRecPtr into a uint64 inadvertently changed the
on-disk format of GiST indexes, because the NSN field in the GiST page
opaque is an XLogRecPtr. That breaks pg_upgrade. Revert the format of that
field back to the two-field struct that XLogRecPtr was before. This is the
same we did to LSNs in the page header to avoid changing on-disk format.
Bump catversion, as this invalidates any existing GiST indexes built on
9.3devel.
|
|
This new facility can not only be used by xlog.c to carry out crash
recovery, but also by external programs. By supplying a function to
read XLog pages from somewhere, all the WAL reading can be used for
completely different purposes.
For the standard backend use, the behavior should be pretty much the
same as previously. As for non-backend programs, an hypothetical
pg_xlogdump program is now closer to reality, but some more backend
support is still necessary.
This patch was originally submitted by Andres Freund in a different
form, but Heikki Linnakangas opted for and authored another design of
the concept. Andres has advanced the patch since Heikki's initial
version. Review and some (mostly cosmetics) changes by me.
|
|
When attempting to move an object into the schema in which it already
was, for most objects classes we were correctly complaining about
exactly that ("object is already in schema"); but for some other object
classes, such as functions, we were instead complaining of a name
collision ("object already exists in schema"). The latter is wrong and
misleading, per complaint from Robert Haas in
CA+TgmoZ0+gNf7RDKRc3u5rHXffP=QjqPZKGxb4BsPz65k7qnHQ@mail.gmail.com
To fix, refactor the way these checks are done. As a bonus, the
resulting code is smaller and can also share some code with Rename
cases.
While at it, remove use of getObjectDescriptionOids() in error messages.
These are normally disallowed because of translatability considerations,
but this one had slipped through since 9.1. (Not sure that this is
worth backpatching, though, as it would create some untranslated
messages in back branches.)
This is loosely based on a patch by KaiGai Kohei, heavily reworked by
me.
|
|
The code in PostPrepare_Locks supposed that it could reassign locks to
the prepared transaction's dummy PGPROC by deleting the PROCLOCK table
entries and immediately creating new ones. This was safe when that code
was written, but since we invented partitioning of the shared lock table,
it's not safe --- another process could steal away the PROCLOCK entry in
the short interval when it's on the freelist. Then, if we were otherwise
out of shared memory, PostPrepare_Locks would have to PANIC, since it's
too late to back out of the PREPARE at that point.
Fix by inventing a dynahash.c function to atomically update a hashtable
entry's key. (This might possibly have other uses in future.)
This is an ancient bug that in principle we ought to back-patch, but the
odds of someone hitting it in the field seem really tiny, because (a) the
risk window is small, and (b) nobody runs servers with maxed-out lock
tables for long, because they'll be getting non-PANIC out-of-memory errors
anyway. So fixing it in HEAD seems sufficient, at least until the new
code has gotten some testing.
|
|
In commit 71450d7fd6c7cf7b3e38ac56e363bff6a681973c, we added code to inform
suitably-intelligent compilers that ereport() doesn't return if the elevel
is ERROR or higher. This patch extends that to elog(), and also fixes a
double-evaluation hazard that the previous commit created in ereport(),
as well as reducing the emitted code size.
The elog() improvement requires the compiler to support __VA_ARGS__, which
should be available in just about anything nowadays since it's required by
C99. But our minimum language baseline is still C89, so add a configure
test for that.
The previous commit assumed that ereport's elevel could be evaluated twice,
which isn't terribly safe --- there are already counterexamples in xlog.c.
On compilers that have __builtin_constant_p, we can use that to protect the
second test, since there's no possible optimization gain if the compiler
doesn't know the value of elevel. Otherwise, use a local variable inside
the macros to prevent double evaluation. The local-variable solution is
inferior because (a) it leads to useless code being emitted when elevel
isn't constant, and (b) it increases the optimization level needed for the
compiler to recognize that subsequent code is unreachable. But it seems
better than not teaching non-gcc compilers about unreachability at all.
Lastly, if the compiler has __builtin_unreachable(), we can use that
instead of abort(), resulting in a noticeable code savings since no
function call is actually emitted. However, it seems wise to do this only
in non-assert builds. In an assert build, continue to use abort(), so that
the behavior will be predictable and debuggable if the "impossible"
happens.
These changes involve making the ereport and elog macros emit do-while
statement blocks not just expressions, which forces small changes in
a few call sites.
Andres Freund, Tom Lane, Heikki Linnakangas
|
|
Historically we've used a couple of very ad-hoc fudge factors to try to
get the right results when indexes of different sizes would satisfy a
query with the same number of index leaf tuples being visited. In
commit 21a39de5809cd3050a37d2554323cc1d0cbeed9d I tweaked one of these
fudge factors, with results that proved disastrous for larger indexes.
Commit bf01e34b556ff37982ba2d882db424aa484c0d07 fudged it some more,
but still with not a lot of principle behind it.
What seems like a better way to address these issues is to explicitly model
index-descent costs, since that's what's really at stake when considering
diferent indexes with similar leaf-page-level costs. We tried that once
long ago, and found that charging random_page_cost per page descended
through was way too much, because upper btree levels tend to stay in cache
in real-world workloads. However, there's still CPU costs to think about,
and the previous fudge factors can be seen as a crude attempt to account
for those costs. So this patch replaces those fudge factors with explicit
charges for the number of tuple comparisons needed to descend the index
tree, plus a small charge per page touched in the descent. The cost
multipliers are chosen so that the resulting charges are in the vicinity of
the historical (pre-9.2) fudge factors for indexes of up to about a million
tuples, while not ballooning unreasonably beyond that, as the old fudge
factor did (even more so in 9.2).
To make this work accurately for btree indexes, add some code that allows
extraction of the known root-page height from a btree. There's no
equivalent number readily available for other index types, but we can use
the log of the number of index pages as an approximate substitute.
This seems like too much of a behavioral change to risk back-patching,
but it should improve matters going forward. In 9.2 I'll just revert
the fudge-factor change.
|
|
For code-reuse in upcoming functionality in pg_basebackup.
Zoltan Boszormenyi
|
|
SPI_execute() and related functions create a CachedPlan, execute it once,
and immediately discard it, so that the functionality offered by
plancache.c is of no value in this code path. And performance measurements
show that the extra data copying and invalidation checking done by
plancache.c slows down simple queries by 10% or more compared to 9.1.
However, enough of the SPI code is shared with functions that do need plan
caching that it seems impractical to bypass plancache.c altogether.
Instead, let's invent a variant version of cached plans that preserves
99% of the API but doesn't offer any of the actual functionality, nor the
overhead. This puts SPI_execute() performance back on par, or maybe even
slightly better, than it was before. This change should resolve recent
complaints of performance degradation from Dong Ye, Pavel Stehule, and
others.
By avoiding data copying, this change also reduces the amount of memory
needed to execute many-statement SPI_execute() strings, as for instance in
a recent complaint from Tomas Vondra.
An additional benefit of this change is that multi-statement SPI_execute()
query strings are now processed fully serially, that is we complete
execution of earlier statements before running parse analysis and planning
on following ones. This eliminates a long-standing POLA violation, in that
DDL that affects the behavior of a later statement will now behave as
expected.
Back-patch to 9.2, since this was a performance regression compared to 9.1.
(In 9.2, place the added struct fields so as to avoid changing the offsets
of existing fields.)
Heikki Linnakangas and Tom Lane
|
|
If you take a base backup from a standby server with "pg_basebackup -X
fetch", and the timeline switches while the backup is being taken, the
backup used to fail with an error "requested WAL segment %s has already
been removed". This is because the server-side code that sends over the
required WAL files would not construct the WAL filename with the correct
timeline after a switch.
Fix that by using readdir() to scan pg_xlog for all the WAL segments in the
range, regardless of timeline.
Also, include all timeline history files in the backup, if taken with
"-X fetch". That fixes another related bug: If a timeline switch happened
just before the backup was initiated in a standby, the WAL segment
containing the initial checkpoint record contains WAL from the older
timeline too. Recovery will not accept that without a timeline history file
that lists the older timeline.
Backpatch to 9.2. Versions prior to that were not affected as you could not
take a base backup from a standby before 9.2.
|
|
This makes it possible to include them only where they are used, so
we can avoid the conflict of the uid_t and gid_t datatypes that happened
in plperl (since plperl doesn't need the tar functions)
|
|
Auxiliary and bootstrap processes weren't getting it, causing initdb to
fail completely.
|
|
Commit da07a1e8 was broken for EXEC_BACKEND because I failed to realize
that the MaxBackends recomputation needed to be duplicated by
subprocesses in SubPostmasterMain. However, instead of having the value
be recomputed at all, it's better to assign the correct value at
postmaster initialization time, and have it be propagated to exec'ed
backends via BackendParameters.
MaxBackends stays as zero until after modules in
shared_preload_libraries have had a chance to register bgworkers, since
the value is going to be untrustworthy till that's finished.
Heikki Linnakangas and Álvaro Herrera
|
|
Fully update git head, and update back branches in ./COPYRIGHT and
legal.sgml files.
|
|
Move some of the tar functionality that existed mostly duplicated
in both pg_dump and the walsender basebackup functionality into
port/tar.c instead, so it can be used from both. It will also be
used by pg_basebackup in the future, which would've caused a third
copy of it around.
Zoltan Boszormenyi and Magnus Hagander
|
|
The cascading standby patch in 9.2 changed the way WAL files are treated
when restored from the archive. Before, they were restored under a temporary
filename, and not kept in pg_xlog, but after the patch, they were copied
under pg_xlog. This is necessary for a cascading standby to find them, but
it also means that if the archive goes offline and a standby is restarted,
it can recover back to where it was using the files in pg_xlog. It also
means that if you take an offline backup from a standby server, it includes
all the required WAL files in pg_xlog.
However, the same change was not made to timeline history files, so if the
WAL segment containing the checkpoint record contains a timeline switch, you
will still get an error if you try to restart recovery without the archive,
or recover from an offline backup taken from the standby.
With this patch, timeline history files restored from archive are copied
into pg_xlog like WAL files are, so that pg_xlog contains all the files
required to recover. This is a corner-case pre-existing issue in 9.2, but
even more important in master where it's possible for a standby to follow a
timeline switch through streaming replication. To make that possible, the
timeline history files must be present in pg_xlog.
|
|
This is again intended to support extensions to the event trigger
functionality. This may go a bit further than we need for that
purpose, but there's some value in being consistent, and the OID
may be useful for other purposes also.
Dimitri Fontaine
|
|
This gets rid of XLByteLT, XLByteLE, XLByteEQ and XLByteAdvance.
These were useful for brevity when XLogRecPtrs were split in
xlogid/xrecoff; but now that they are simple uint64's, they are just
clutter. The only downside to making this change would be ease of
backporting patches, but that has been negated by other substantive
changes to the involved code anyway. The clarity of simpler expressions
makes the change worthwhile.
Most of the changes are mechanical, but in a couple of places, the patch
author chose to invert the operator sense, making the code flow more
logical (and more in line with preceding comments).
Author: Andres Freund
Eyeballed by Dimitri Fontaine and Alvaro Herrera
|
|
Commit 061e7efb1b did away with its last caller, but neglected to remove
the actual definition.
Author: Andres Freund
|
|
Ensure comments accurately reflect state of code
given new understanding, and recent changes.
Include example code from Noah Misch to
illustrate how rd_newRelfilenodeSubid can be
reset deterministically. No code changes.
|
|
by unmatched function prototypes.
Andres Freund
|
|
|
|
Extracted from a larger patch by Dimitri Fontaine. It is hoped that
this will provide infrastructure for enriching the new event trigger
functionality, but it seems possibly useful for other purposes as
well.
|
|
transformExpr() is required to cope with already-transformed expression
trees, for various ugly-but-not-quite-worth-cleaning-up reasons. However,
some of its newer subroutines hadn't gotten the memo. This accounts for
bug #7763 from Norbert Buchmuller: transformRowExpr() was overwriting the
previously determined type of a RowExpr during CREATE TABLE LIKE INCLUDING
INDEXES. Additional investigation showed that transformXmlExpr had the
same kind of problem, but all the other cases seem to be safe.
Andres Freund and Tom Lane
|
|
Fujii Masao
|
|
Most of the time, the last replayed record comes from the recovery target
timeline, but there is a corner case where it makes a difference. When
the startup process scans for a new timeline, and decides to change recovery
target timeline, there is a window where the recovery target TLI has already
been bumped, but there are no WAL segments from the new timeline in pg_xlog
yet. For example, if we have just replayed up to point 0/30002D8, on
timeline 1, there is a WAL file called 000000010000000000000003 in pg_xlog
that contains the WAL up to that point. When recovery switches recovery
target timeline to 2, a walsender can immediately try to read WAL from
0/30002D8, from timeline 2, so it will try to open WAL file
000000020000000000000003. However, that doesn't exist yet - the startup
process hasn't copied that file from the archive yet nor has the walreceiver
streamed it yet, so walsender fails with error "requested WAL segment
000000020000000000000003 has already been removed". That's harmless, in that
the standby will try to reconnect later and by that time the segment is
already created, but error messages that should be ignored are not good.
To fix that, have walsender track the TLI of the last replayed record,
instead of the recovery target timeline. That way walsender will not try to
read anything from timeline 2, until the WAL segment has been created and at
least one record has been replayed from it. The recovery target timeline is
now xlog.c's internal affair, it doesn't need to be exposed in shared memory
anymore.
This fixes the error reported by Thom Brown. depesz the same error message,
but I'm not sure if this fixes his scenario.
|
|
During crash recovery, we remove disk files belonging to temporary tables,
but the system catalog entries for such tables are intentionally not
cleaned up right away. Instead, the first backend that uses a temp schema
is expected to clean out any leftover objects therein. This approach
requires that we be careful to ignore leftover temp tables (since any
actual access attempt would fail), *even if their BackendId matches our
session*, if we have not yet established use of the session's corresponding
temp schema. That worked fine in the past, but was broken by commit
debcec7dc31a992703911a9953e299c8d730c778 which incorrectly removed the
rd_islocaltemp relcache flag. Put it back, and undo various changes
that substituted tests like "rel->rd_backend == MyBackendId" for use
of a state-aware flag. Per trouble report from Heikki Linnakangas.
Back-patch to 9.1 where the erroneous change was made. In the back
branches, be careful to add rd_islocaltemp in a spot in the struct that
was alignment padding before, so as not to break existing add-on code.
|
|
Per discussion on-hackers. psql is converted to use the new code.
Follows a suggestion from Heikki Linnakangas.
|
|
Before this patch, streaming replication would refuse to start replicating
if the timeline in the primary doesn't exactly match the standby. The
situation where it doesn't match is when you have a master, and two
standbys, and you promote one of the standbys to become new master.
Promoting bumps up the timeline ID, and after that bump, the other standby
would refuse to continue.
There's significantly more timeline related logic in streaming replication
now. First of all, when a standby connects to primary, it will ask the
primary for any timeline history files that are missing from the standby.
The missing files are sent using a new replication command TIMELINE_HISTORY,
and stored in standby's pg_xlog directory. Using the timeline history files,
the standby can follow the latest timeline present in the primary
(recovery_target_timeline='latest'), just as it can follow new timelines
appearing in an archive directory.
START_REPLICATION now takes a TIMELINE parameter, to specify exactly which
timeline to stream WAL from. This allows the standby to request the primary
to send over WAL that precedes the promotion. The replication protocol is
changed slightly (in a backwards-compatible way although there's little hope
of streaming replication working across major versions anyway), to allow
replication to stop when the end of timeline reached, putting the walsender
back into accepting a replication command.
Many thanks to Amit Kapila for testing and reviewing various versions of
this patch.
|
|
This makes unnecessary the ugly hack used to #include postgres.h in
pg_basebackup.
Based on Alvaro Herrera's patch
|
|
In situations where there are over 8MB of empty pages at the end of
a table, the truncation work for trailing empty pages takes longer
than deadlock_timeout, and there is frequent access to the table by
processes other than autovacuum, there was a problem with the
autovacuum worker process being canceled by the deadlock checking
code. The truncation work done by autovacuum up that point was
lost, and the attempt tried again by a later autovacuum worker. The
attempts could continue indefinitely without making progress,
consuming resources and blocking other processes for up to
deadlock_timeout each time.
This patch has the autovacuum worker checking whether it is
blocking any other thread at 20ms intervals. If such a condition
develops, the autovacuum worker will persist the work it has done
so far, release its lock on the table, and sleep in 50ms intervals
for up to 5 seconds, hoping to be able to re-acquire the lock and
try again. If it is unable to get the lock in that time, it moves
on and a worker will try to continue later from the point this one
left off.
While this patch doesn't change the rules about when and what to
truncate, it does cause the truncation to occur sooner, with less
blocking, and with the consumption of fewer resources when there is
contention for the table's lock.
The only user-visible change other than improved performance is
that the table size during truncation may change incrementally
instead of just once.
This problem exists in all supported versions but is infrequently
reported, although some reports of performance problems when
autovacuum runs might be caused by this. Initial commit is just the
master branch, but this should probably be backpatched once the
build farm and general developer usage confirm that there are no
surprising effects.
Jan Wieck
|
|
This patch makes "simple" views automatically updatable, without the need
to create either INSTEAD OF triggers or INSTEAD rules. "Simple" views
are those classified as updatable according to SQL-92 rules. The rewriter
transforms INSERT/UPDATE/DELETE commands on such views directly into an
equivalent command on the underlying table, which will generally have
noticeably better performance than is possible with either triggers or
user-written rules. A view that has INSTEAD OF triggers or INSTEAD rules
continues to operate the same as before.
For the moment, security_barrier views are not considered simple.
Also, we do not support WITH CHECK OPTION. These features may be
added in future.
Dean Rasheed, reviewed by Amit Kapila
|
|
Background workers are postmaster subprocesses that run arbitrary
user-specified code. They can request shared memory access as well as
backend database connections; or they can just use plain libpq frontend
database connections.
Modules listed in shared_preload_libraries can register background
workers in their _PG_init() function; this is early enough that it's not
necessary to provide an extra GUC option, because the necessary extra
resources can be allocated early on. Modules can install more than one
bgworker, if necessary.
Care is taken that these extra processes do not interfere with other
postmaster tasks: only one such process is started on each ServerLoop
iteration. This means a large number of them could be waiting to be
started up and postmaster is still able to quickly service external
connection requests. Also, shutdown sequence should not be impacted by
a worker process that's reasonably well behaved (i.e. promptly responds
to termination signals.)
The current implementation lets worker processes specify their start
time, i.e. at what point in the server startup process they are to be
started: right after postmaster start (in which case they mustn't ask
for shared memory access), when consistent state has been reached
(useful during recovery in a HOT standby server), or when recovery has
terminated (i.e. when normal backends are allowed).
In case of a bgworker crash, actions to take depend on registration
data: if shared memory was requested, then all other connections are
taken down (as well as other bgworkers), just like it were a regular
backend crashing. The bgworker itself is restarted, too, within a
configurable timeframe (which can be configured to be never).
More features to add to this framework can be imagined without much
effort, and have been discussed, but this seems good enough as a useful
unit already.
An elementary sample module is supplied.
Author: Álvaro Herrera
This patch is loosely based on prior patches submitted by KaiGai Kohei,
and unsubmitted code by Simon Riggs.
Reviewed by: KaiGai Kohei, Markus Wanner, Andres Freund,
Heikki Linnakangas, Simon Riggs, Amit Kapila
|
|
This allows us to do some more rigorous sanity checking for various
incorrect point-in-time recovery scenarios, and provides more information
for debugging purposes. It will also come handy in the upcoming patch to
allow timeline switches to be replicated by streaming replication.
|
|
This allows recovery to notice certain incorrect recovery scenarios.
If a server has recovered to point X on timeline 5, and you restart
recovery, it better be on timeline 5 when it reaches point X again, not on
some timeline with a higher ID. This can happen e.g if you a standby server
is shut down, a new timeline appears in the WAL archive, and the standby
server is restarted. It will try to follow the new timeline, which is wrong
because some WAL on the old timeline was already replayed before shutdown.
Requires an initdb (or at least pg_resetxlog), because this adds a field to
the control file.
|
|
Allow specifying LDAP authentication parameters as RFC 4516 LDAP URLs.
|
|
Rename PGXACT->inCommit flag into delayChkpt flag,
and generalise comments to allow use in other situations,
such as the forthcoming potential use in checksum patch.
Replace wait loop to look for VXIDs with delayChkpt set.
No user visible changes, not behaviour changes at present.
Simon Riggs, reviewed and rebased by Jeff Davis
|
