| Age | Commit message (Collapse) | Author |
|---|
|
as six bytes not eight. This fixes a regression test failure but more
importantly avoids wasting four bytes of pad space in every tuple header.
Also add some commentary about what's going on.
|
|
|
|
|
|
|
|
accepts nnnLL syntax for long long constants. If so, decorate the CRC64
constants with LL to avoid warnings and/or erroneous results from certain
non-standards-compliant compilers.
|
|
can be compiled with asserts enabled on Windoze.
|
|
|
|
|
|
|
|
NEXTXID isn't really necessary, per previous discussion in pghackers,
but I mulishy insisted we should put it in anyway. Mea culpa.
|
|
work in BeOS port.
|
|
O_SYNC, or O_DSYNC (as available on a given platform). Add GUC parameter
to control sync method.
Also, add defense to XLogWrite to prevent it from going nuts if passed
a target write position that's past the end of the buffers so far filled
by XLogInsert.
|
|
is still a memory leak, but a little less bad than it was.
|
|
(per recent discussion with Tatsuo). Hopefully the compilers with
that old bug are all long gone.
|
|
detect case that next page in log came from an older run than the prior
page. This avoids the necessity to re-zero the log after recovery from
a crash, which is good because we need not risk destroying valuable log
information.
This forces another initdb since yesterday :-(. Need to get that log
reset utility done...
|
|
* Store two past checkpoint locations, not just one, in pg_control.
On startup, we fall back to the older checkpoint if the newer one
is unreadable. Also, a physical copy of the newest checkpoint record
is kept in pg_control for possible use in disaster recovery (ie,
complete loss of pg_xlog). Also add a version number for pg_control
itself. Remove archdir from pg_control; it ought to be a GUC
parameter, not a special case (not that it's implemented yet anyway).
* Suppress successive checkpoint records when nothing has been entered
in the WAL log since the last one. This is not so much to avoid I/O
as to make it actually useful to keep track of the last two
checkpoints. If the things are right next to each other then there's
not a lot of redundancy gained...
* Change CRC scheme to a true 64-bit CRC, not a pair of 32-bit CRCs
on alternate bytes. Polynomial borrowed from ECMA DLT1 standard.
* Fix XLOG record length handling so that it will work at BLCKSZ = 32k.
* Change XID allocation to work more like OID allocation. (This is of
dubious necessity, but I think it's a good idea anyway.)
* Fix a number of minor bugs, such as off-by-one logic for XLOG file
wraparound at the 4 gig mark.
* Add documentation and clean up some coding infelicities; move file
format declarations out to include files where planned contrib
utilities can get at them.
* Checkpoint will now occur every CHECKPOINT_SEGMENTS log segments or
every CHECKPOINT_TIMEOUT seconds, whichever comes first. It is also
possible to force a checkpoint by sending SIGUSR1 to the postmaster
(undocumented feature...)
* Defend against kill -9 postmaster by storing shmem block's key and ID
in postmaster.pid lockfile, and checking at startup to ensure that no
processes are still connected to old shmem block (if it still exists).
* Switch backends to accept SIGQUIT rather than SIGUSR1 for emergency
stop, for symmetry with postmaster and xlog utilities. Clean up signal
handling in bootstrap.c so that xlog utilities launched by postmaster
will react to signals better.
* Standalone bootstrap now grabs lockfile in target directory, as added
insurance against running it in parallel with live postmaster.
|
|
|
|
|
|
from "Tegge, Bernd" <tegge@repas-aeg.de>
|
|
|
|
when user does another FETCH after reaching end of data, or another
FETCH backwards after reaching start. This is needed because some plan
nodes are not very robust about being called again after they've already
returned NULL; for example, MergeJoin will crash in some states but not
others. While the ideal approach would be for them all to handle this
correctly, it seems foolish to assume that no such bugs would creep in
again once cleaned up. Therefore, the most robust answer is to prevent
the situation from arising at all.
|
|
noncachable, so that CURRENT_DATE and CURRENT_TIME work as functions
again, rather than being collapsed to constants immediately. Marking the
reverse conversions noncachable might be overkill, but I'm not sure;
do these datatypes have the notion of a CURRENT value? Better safe than
sorry, for now.
|
|
|
|
only if at least N other backends currently have open transactions. This
is not a great deal of intelligence about whether a delay might be
profitable ... but it beats no intelligence at all. Note that the default
COMMIT_DELAY is still zero --- this new code does nothing unless that
setting is changed.
Also, mark ENABLEFSYNC as a system-wide setting. It's no longer safe to
allow that to be set per-backend, since we may be relying on some other
backend's fsync to have synced the WAL log.
|
|
|
|
> Is there one LOCKMETHODCTL for every backend? I thought there was only
> one of them.
>>
>> You're right, that line is erroneous; it should read
>>
>> size += MAX_LOCK_METHODS * MAXALIGN(sizeof(LOCKMETHODCTL));
>>
>> Not a significant error but it should be changed for clarity ...
|
|
|
|
|
|
up the comments later.
|
|
|
|
|
|
be lurking in the install target directory. But don't zap up-to-date
headers (so install-all-headers before regular install will work).
Per suggestion from Larry Rosenman.
|
|
use the ANSI varargs style (<stdarg.h>) not the old style. Tatsuo had
reported this change was necessary back in the 7.0 beta cycle (4/13/00)
but for some reason, making the edit never got done.
|
|
syntax. Fix the RESULT_OID case, which never worked. Add documentation.
|
|
waste of cycles on single-CPU machines, and of dubious utility on multi-CPU
machines too.
Tweak s_lock_stuck so that caller can specify timeout interval, and
increase interval before declaring stuck spinlock for buffer locks and XLOG
locks.
On systems that have fdatasync(), use that rather than fsync() to sync WAL
log writes. Ensure that WAL file is entirely allocated during XLogFileInit.
|
|
to generate unnecessarily stupid code. Tweak macro to describe a series
of store-constant ops, not store/load/store/load/store/load/store.
|
|
1. If there is exactly one pg_operator entry of the right name and oprkind,
oper() and related routines would return that entry whether its input type
had anything to do with the request or not. This is just premature
optimization: we shouldn't return the single candidate until after we verify
that it really is a valid candidate, ie, is at least coercion-compatible
with the given types.
2. oper() and related routines only promise a coercion-compatible result.
Unfortunately, there were quite a few callers that assumed the returned
operator is binary-compatible with the given datatype; they would proceed
to call it without making any datatype coercions. These callers include
sorting, grouping, aggregation, and VACUUM ANALYZE. In general I think
it is appropriate for these callers to require an exact or binary-compatible
match, so I've added a new routine compatible_oper() that only succeeds if
it can find an operator that doesn't require any run-time conversions.
Callers now call oper() or compatible_oper() depending on whether they are
prepared to deal with type conversion or not.
The upshot of these bugs is revealed by the following silliness in PL/Tcl's
selftest: it creates an operator @< on int4, and then tries to use it to
sort a char(N) column. The system would let it do that :-( (and evidently
has done so since 6.3 :-( :-(). The result in this case was just a silly
sort order, but the reverse combination would've provoked coredump from
trying to dereference integers. With this fix you get more reasonable
behavior:
pltcl_test=# select * from T_pkey1 order by key1, key2 using @<;
ERROR: Unable to identify an operator '@<' for types 'bpchar' and 'bpchar'
You will have to retype this query using an explicit cast
|
|
relations. It's not very bright, but at least it now knows that
A LEFT JOIN B must produce at least as many rows as are in A ...
|
|
compressed storage works perfectly well. Might as well have a coherent
strategy for applying it, rather than the haphazard store-what-you-get
approach that was in the code before. The strategy I've set up here is
to attempt compression of any compressible index value exceeding
BLCKSZ/16, or about 500 bytes by default.
|
|
clause with an alias is a <subquery> and therefore hides table references
appearing within it, according to the spec. This is the same as the
preliminary patch I posted to pgsql-patches yesterday, plus some really
grotty code in ruleutils.c to reverse-list a query tree with the correct
alias name depending on context. I'd rather not have done that, but unless
we want to force another initdb for 7.1, there's no other way for now.
|
|
as previously discussed.
It makes AIX and IRIX not use DST for dates before 1970.
The following expected files need to be removed from the regression tests,
they contain wrong results and are not needed any more.
src/test/regress/expected/horology-1947-PDT.out
src/test/regress/expected/tinterval-1947-PDT.out
src/test/regress/expected/abstime-1947-PDT.out
Zeugswetter Andreas
|
|
definitions from K&R to ANSI C style, and fix broken assumption that
int and long are the same datatype. This repairs problems observed
on Alpha with regexps having between 32 and 63 states.
|
|
|
|
|
|
two transactions create the same table name concurrently, the one that
fails will complain about unique index pg_class_relname_index, rather than
about pg_type_typname_index which'll confuse most people. Free side
benefit: pg_class.reltype is correctly linked to the pg_type entry now.
It's been zero in all but the preloaded pg_class entries since who knows
when.
|
|
Man, this brings back some old memories ...
|
|
are now separate files "postgres.h" and "postgres_fe.h", which are meant
to be the primary include files for backend .c files and frontend .c files
respectively. By default, only include files meant for frontend use are
installed into the installation include directory. There is a new make
target 'make install-all-headers' that adds the whole content of the
src/include tree to the installed fileset, for use by people who want to
develop server-side code without keeping the complete source tree on hand.
Cleaned up a whole lot of crufty and inconsistent header inclusions.
|
|
Then I recompiled pgsql and I have compiled a program with ecpg.
I have removed the termios.h, and the ECHO hack.
Thanks
Maurizio
|
|
is clearly not maintainable, so dike it out in favor of calling the real
version in the backend's gram.y.
|
|
|
