| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Also "make reformat-dat-files".
The only change worthy of note is that pgindent messed up the formatting
of launcher.c's struct LogicalRepWorkerId, which led me to notice that
that struct wasn't used at all anymore, so I just took it out.
|
|
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 1c361d3ac016b61715d99f2055dee050397e3f13
|
|
Turns out you can specify negative values using plurals:
https://english.stackexchange.com/questions/9735/is-1-followed-by-a-singular-or-plural-noun
so the previous code was correct enough, and consistent with other usage
in our code. Also add comment in the two places where this could be
confused.
Reported-by: Noah Misch
Diagnosed-by: 20210425115726.GA2353095@rfd.leadboat.com
|
|
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210416070310.GG3315@telsasoft.com
|
|
This adds support for writing CREATE FUNCTION and CREATE PROCEDURE
statements for language SQL with a function body that conforms to the
SQL standard and is portable to other implementations.
Instead of the PostgreSQL-specific AS $$ string literal $$ syntax,
this allows writing out the SQL statements making up the body
unquoted, either as a single statement:
CREATE FUNCTION add(a integer, b integer) RETURNS integer
LANGUAGE SQL
RETURN a + b;
or as a block
CREATE PROCEDURE insert_data(a integer, b integer)
LANGUAGE SQL
BEGIN ATOMIC
INSERT INTO tbl VALUES (a);
INSERT INTO tbl VALUES (b);
END;
The function body is parsed at function definition time and stored as
expression nodes in a new pg_proc column prosqlbody. So at run time,
no further parsing is required.
However, this form does not support polymorphic arguments, because
there is no more parse analysis done at call time.
Dependencies between the function and the objects it uses are fully
tracked.
A new RETURN statement is introduced. This can only be used inside
function bodies. Internally, it is treated much like a SELECT
statement.
psql needs some new intelligence to keep track of function body
boundaries so that it doesn't send off statements when it sees
semicolons that are inside a function body.
Tested-by: Jaime Casanova <jcasanov@systemguards.com.ec>
Reviewed-by: Julien Rouhaud <rjuju123@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/1c11f1eb-f00c-43b7-799d-2d44132c02d7@2ndquadrant.com
|
|
All other places already use MONTHS_PER_YEAR appropriately.
Backpatch-through: 9.6
|
|
This outputs "-1 year", not "-1 years".
Reported-by: neverov.max@gmail.com
Bug: 16939
Discussion: https://postgr.es/m/16939-cceeb03fb72736ee@postgresql.org
|
|
|
|
This command declares a SQL identifier for a SQL statement to be used in other
embedded SQL statements. The identifier is linked to a connection.
Author: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Shawn Wang <shawn.wang.pg@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/TY2PR01MB24438A52DB04E71D0E501452F5630@TY2PR01MB2443.jpnprd01.prod.outlook.com
|
|
The portions fixing the documentation are backpatched where needed.
Author: Justin Pryzby
Discussion: https://postgr.es/m/20210210235557.GQ20012@telsasoft.com
backpatch-through: 9.6
|
|
The stanza in ECPGconnect() that intended to allow specification of a
Unix socket directory path in place of a port has never executed since
it was committed, nearly two decades ago; the preceding strrchr()
already found the last colon so there cannot be another one. The lack
of complaints about that is doubtless related to the fact that no
user-facing documentation suggested it was possible.
Rather than try to fix that up, let's just remove the unreachable
code, and instead document the way that does work to write a socket
directory path, namely specifying it as a "host" option.
In support of that, make another pass at clarifying the syntax
documentation for ECPG connection targets, particularly documenting
which things are parsed as identifiers and where to use double quotes.
Rearrange some things that seemed poorly ordered, and fix a couple of
minor doc errors.
Kyotaro Horiguchi, per gripe from Shenhao Wang
(docs changes mostly by me)
Discussion: https://postgr.es/m/ae52a416bbbf459c96bab30b3038e06c@G08CNEXMBPEKD06.g08.fujitsu.local
|
|
We had "short *mdy" in the extern declarations, but "short mdy[3]"
in the actual function definitions. Per C99 these are equivalent,
but recent versions of gcc have started to issue warnings about
the inconsistency. Clean it up before the warnings get any more
widespread.
Back-patch, in case anyone wants to build older PG versions with
bleeding-edge compilers.
Discussion: https://postgr.es/m/2401575.1611764534@sss.pgh.pa.us
|
|
Reported-by: Ashutosh Sharma <ashu.coek88@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAE9k0PkORqHHGKY54-sFyDpP90yAf%2B05Auc4fs9EAn4J%2BuBeUQ%40mail.gmail.com
|
|
I should have updated this in commits 52a10224e and follow-ons,
but I missed it because it's not run by default, and none of the
buildfarm runs it either. Maybe we should try to improve that
situation.
Discussion: https://postgr.es/m/CAH2-Wz=j9SRW=s5BV4-3k+=tr4N3A03in+gTuVA09vNF+-iHjA@mail.gmail.com
|
|
opt_distinct_clause is only used in PLpgSQL_Expr, which ecpg
ignores, so it needs to ignore opt_distinct_clause too.
My oversight in 7cd9765f9; reported by Bruce Momjian.
Discussion: https://postgr.es/m/E1l33wr-0005sJ-9n@gemulon.postgresql.org
|
|
libpq's error messages for connection failures pretty well stand on
their own, especially since commits 52a10224e/27a48e5a1. Prefixing
them with 'could not connect to database "foo"' or the like is just
redundant, and perhaps even misleading if the specific database name
isn't relevant to the failure. (When it is, we trust that the
backend's error message will include the DB name.) Indeed, psql
hasn't used any such prefix in a long time. So, make all our other
programs and documentation examples agree with psql's practice.
Discussion: https://postgr.es/m/1094524.1611266589@sss.pgh.pa.us
|
|
"connection to server so-and-so failed:" seems clearer than the
previous wording "could not connect to so-and-so:" (introduced by
52a10224e), because the latter suggests a network-level connection
failure. We're now prefixing this string to all types of connection
failures, for instance authentication failures; so we need wording
that doesn't imply a low-level error.
Per discussion with Robert Haas.
Discussion: https://postgr.es/m/CA+TgmobssJ6rS22dspWnu-oDxXevGmhMD8VcRBjmj-b9UDqRjw@mail.gmail.com
|
|
Prefix "could not connect to host-or-socket-path:" to all connection
failure cases that occur after the socket() call, and remove the
ad-hoc server identity data that was appended to a few of these
messages. This should produce much more intelligible error reports
in multiple-target-host situations, especially for error cases that
are off the beaten track to any degree (because none of those provided
any server identity info).
As an example of the change, formerly a connection attempt with a bad
port number such as "psql -p 12345 -h localhost,/tmp" might produce
psql: error: could not connect to server: Connection refused
Is the server running on host "localhost" (::1) and accepting
TCP/IP connections on port 12345?
could not connect to server: Connection refused
Is the server running on host "localhost" (127.0.0.1) and accepting
TCP/IP connections on port 12345?
could not connect to server: No such file or directory
Is the server running locally and accepting
connections on Unix domain socket "/tmp/.s.PGSQL.12345"?
Now it looks like
psql: error: could not connect to host "localhost" (::1), port 12345: Connection refused
Is the server running on that host and accepting TCP/IP connections?
could not connect to host "localhost" (127.0.0.1), port 12345: Connection refused
Is the server running on that host and accepting TCP/IP connections?
could not connect to socket "/tmp/.s.PGSQL.12345": No such file or directory
Is the server running locally and accepting connections on that socket?
This requires adjusting a couple of regression tests to allow for
variation in the contents of a connection failure message.
Discussion: https://postgr.es/m/BN6PR05MB3492948E4FD76C156E747E8BC9160@BN6PR05MB3492.namprd05.prod.outlook.com
|
|
Add an optional callback to regression_main() that, if provided,
is invoked on each test output file before we try to compare it
to the expected-result file.
The main and isolation test programs don't need this (yet).
In pg_regress_ecpg, add a filter that eliminates target-host
details from "could not connect" error reports. This filter
doesn't do anything as of this commit, but it will be needed
by the next one.
In the long run we might want to provide some more general,
perhaps pattern-based, filtering mechanism for test output.
For now, this will solve the immediate problem.
Discussion: https://postgr.es/m/BN6PR05MB3492948E4FD76C156E747E8BC9160@BN6PR05MB3492.namprd05.prod.outlook.com
|
|
Invent new RawParseModes that allow the core grammar to handle
pl/pgsql expressions and assignments directly, and thereby get rid
of a lot of hackery in pl/pgsql's parser. This moves a good deal
of knowledge about pl/pgsql into the core code: notably, we have to
invent a CoercionContext that matches pl/pgsql's (rather dubious)
historical behavior for assignment coercions. That's getting away
from the original idea of pl/pgsql as an arm's-length extension of
the core, but really we crossed that bridge a long time ago.
The main advantage of doing this is that we can now use the core
parser to generate FieldStore and/or SubscriptingRef nodes to handle
assignments to pl/pgsql variables that are records or arrays. That
fixes a number of cases that had never been implemented in pl/pgsql
assignment, such as nested records and array slicing, and it allows
pl/pgsql assignment to support the datatype-specific subscripting
behaviors introduced in commit c7aba7c14.
There are cosmetic benefits too: when a syntax error occurs in a
pl/pgsql expression, the error report no longer includes the confusing
"SELECT" keyword that used to get prefixed to the expression text.
Also, there seem to be some small speed gains.
Discussion: https://postgr.es/m/4165684.1607707277@sss.pgh.pa.us
|
|
This patch essentially allows gram.y to implement a family of related
syntax trees, rather than necessarily always parsing a list of SQL
statements. raw_parser() gains a new argument, enum RawParseMode,
to say what to do. As proof of concept, add a mode that just parses
a TypeName without any other decoration, and use that to greatly
simplify typeStringToTypeName().
In addition, invent a new SPI entry point SPI_prepare_extended() to
allow SPI users (particularly plpgsql) to get at this new functionality.
In hopes of making this the last variant of SPI_prepare(), set up its
additional arguments as a struct rather than direct arguments, and
promise that future additions to the struct can default to zero.
SPI_prepare_cursor() and SPI_prepare_params() can perhaps go away at
some point.
Discussion: https://postgr.es/m/4165684.1607707277@sss.pgh.pa.us
|
|
Backpatch-through: 9.5
|
|
Since at least 2001 we've used putenv() and avoided setenv(), on the
grounds that the latter was unportable and not in POSIX. However,
POSIX added it that same year, and by now the situation has reversed:
setenv() is probably more portable than putenv(), since POSIX now
treats the latter as not being a core function. And setenv() has
cleaner semantics too. So, let's reverse that old policy.
This commit adds a simple src/port/ implementation of setenv() for
any stragglers (we have one in the buildfarm, but I'd not be surprised
if that code is never used in the field). More importantly, extend
win32env.c to also support setenv(). Then, replace usages of putenv()
with setenv(), and get rid of some ad-hoc implementations of setenv()
wannabees.
Also, adjust our src/port/ implementation of unsetenv() to follow the
POSIX spec that it returns an error indicator, rather than returning
void as per the ancient BSD convention. I don't feel a need to make
all the call sites check for errors, but the portability stub ought
to match real-world practice.
Discussion: https://postgr.es/m/2065122.1609212051@sss.pgh.pa.us
|
|
ecpglib on certain platforms can't handle the pg_log_fatal calls from
libraries. This was reported by the buildfarm. It needs a refactoring
and return value change if it is later removed.
Backpatch-through: master
|
|
This allows removal of a copy of hex_decode() from ecpg, and will be
used by the soon-to-be added pg_alterckey command.
Backpatch-through: master
|
|
|
|
The buildfarm thinks this leads to memory stomps, though annoyingly
I can't duplicate that here. The existing code in strings.pgc is
doing something that doesn't seem to be sanctioned at all really
by the documentation, but I'm disinclined to try to make that nicer
right now. Let's just declare some more output variables in hopes
of working around it.
|
|
These were broken in multiple ways:
* The xbstart and xhstart lexer actions neglected to set
"state_before_str_start" before transitioning to the xb/xh states,
thus possibly resulting in "internal error: unreachable state" later.
* The test for valid string contents at the end of xb state was flat out
wrong, as it accounted incorrectly for the "b" prefix that the xbstart
action had injected. Meanwhile, the xh state had no such check at all.
* The generated literal value failed to include any quote marks.
* The grammar did the wrong thing anyway, typically ignoring the
literal value and emitting something else, since BCONST and XCONST
tokens were handled randomly differently from SCONST tokens.
The first of these problems is evidently an oversight in commit
7f380c59f, but the others seem to be very ancient. The lack of
complaints shows that ECPG users aren't using these syntaxes much
(although I do vaguely remember one previous complaint).
As written, this patch is dependent on 7f380c59f, so it can't go
back further than v13. Given the shortage of complaints, I'm not
excited about adapting the patch to prior branches.
Report and patch by Shenhao Wang (test case adjusted by me)
Discussion: https://postgr.es/m/d6402f1bacb74ecba22ef715dbba17fd@G08CNEXMBPEKD06.g08.fujitsu.local
|
|
On the same reasoning as in commit 36b931214, forbid using custom
oid_symbol macros in pg_type as well as pg_proc, so that we always
rely on the predictable macro names generated by genbki.pl.
We do continue to grant grandfather status to the names CASHOID and
LSNOID, although those are now considered deprecated aliases for the
preferred names MONEYOID and PG_LSNOID. This is because there's
likely to be client-side code using the old names, and this bout of
neatnik-ism doesn't quite seem worth breaking client code.
There might be a case for grandfathering EVTTRIGGEROID, too, since
externally-maintained PLs may reference that symbol. But renaming
such references to EVENT_TRIGGEROID doesn't seem like a particularly
heavy lift --- we make far more significant backend API changes in
every major release. For now I didn't add that, but we could
reconsider if there's pushback.
The other names changed here seem pretty unlikely to have any outside
uses. Again, we could add alias macros if there are complaints, but
for now I didn't.
As before, no need for a catversion bump.
John Naylor
Discussion: https://postgr.es/m/CAFBsxsHpCbjfoddNGpnnnY5pHwckWfiYkMYSF74PmP1su0+ZOw@mail.gmail.com
|
|
We must not set the "done" flag until after we've executed the
initialization function. Otherwise, other threads can fall through
the initial unlocked test before initialization is really complete.
This has been seen to cause rare failures of ecpg's thread/descriptor
test, and it could presumably cause other sorts of misbehavior in
threaded ECPG-using applications, since ecpglib relies on
pthread_once() in several places.
Diagnosis and patch by me, based on investigation by Alexander Lakhin.
Back-patch to all supported branches (the bug dates to 2007).
Discussion: https://postgr.es/m/16685-d6cd241872c101d3@postgresql.org
|
|
ECPG's PREPARE ... FROM and EXECUTE IMMEDIATE can optionally take
the target query as a simple literal, rather than the more usual
string-variable reference. This was previously documented as
being a C string literal, but that's a lie in one critical respect:
you can't write a data double quote as \" in such literals. That's
because the lexer is in SQL mode at this point, so it'll parse
double-quoted strings as SQL identifiers, within which backslash
is not special, so \" ends the literal.
I looked into making this work as documented, but getting the lexer
to switch behaviors at just the right point is somewhere between
very difficult and impossible. It's not really worth the trouble,
because these cases are next to useless: if you have a fixed SQL
statement to execute or prepare, you might as well write it as
a direct EXEC SQL, saving the messiness of converting it into
a string literal and gaining the opportunity for compile-time
SQL syntax checking.
Instead, let's just document (and test) the workaround of writing
a double quote as an octal escape (\042) in such cases.
There's no code behavioral change here, so in principle this could
be back-patched, but it's such a niche case I doubt it's worth
the trouble.
Per report from 1250kv.
Discussion: https://postgr.es/m/673825.1603223178@sss.pgh.pa.us
|
|
If you write the literal 'abc''def' in an EXEC SQL command, that will
come out the other end as 'abc'def', triggering a syntax error in the
backend. Likewise, "abc""def" is reduced to "abc"def" which is wrong
syntax for a quoted identifier.
The cause is that the lexer thinks it should emit just one quote
mark, whereas what it really should do is keep the string as-is.
Add some docs and test cases, too.
Although this seems clearly a bug, I fear users wouldn't appreciate
changing it in minor releases. Some may well be working around it
by applying an extra doubling of affected quotes, as for example
sql/dyntest.pgc has been doing.
Per investigation of a report from 1250kv, although this isn't
exactly what he/she was on about.
Discussion: https://postgr.es/m/673825.1603223178@sss.pgh.pa.us
|
|
After de8feb1f3a23465b5737e8a8c160e8ca62f61339, some warnings remained
that were only visible when using GCC on Windows. Fix those as well.
Note that the ecpg test source files don't use the full pg_config.h,
so we can't use pg_funcptr_t there but have to do it the long way.
|
|
Mostly already done, but there were some stragglers.
|
|
Further experience says that the appending behavior offered by
pg_get_line_append is useful to only a very small minority of callers.
For most, the requirement to reset the buffer after each line is just
an error-prone nuisance. Hence, invent another alternative call
pg_get_line_buf, which takes care of that detail.
Noted while reviewing a patch from Daniel Gustafsson.
Discussion: https://postgr.es/m/48A4FA71-524E-41B9-953A-FD04EF36E2E7@yesql.se
|
|
Up to now, if you tried to omit "AS" before a column label in a SELECT
list, it would only work if the column label was an IDENT, that is not
any known keyword. This is rather unfriendly considering that we have
so many keywords and are constantly growing more. In the wake of commit
1ed6b8956 it's possible to improve matters quite a bit.
We'd originally tried to make this work by having some of the existing
keyword categories be allowed without AS, but that didn't work too well,
because each category contains a few special cases that don't work
without AS. Instead, invent an entirely orthogonal keyword property
"can be bare column label", and mark all keywords that way for which
we don't get shift/reduce errors by doing so.
It turns out that of our 450 current keywords, all but 39 can be made
bare column labels, improving the situation by over 90%. This number
might move around a little depending on future grammar work, but it's
a pretty nice improvement.
Mark Dilger, based on work by myself and Robert Haas;
review by John Naylor
Discussion: https://postgr.es/m/38ca86db-42ab-9b48-2902-337a0d6b8311@2ndquadrant.com
|
|
Refactor replace_string() to use a StringInfo for the modifiable
string argument. This allows the string to be of indefinite size
initially and/or grow substantially during replacement. The previous
logic in convert_sourcefiles_in() had a hard-wired limit of 1024
bytes on any line in input/*.sql or output/*.out files. While we've
not had reports of trouble yet, it'd surely have bit us someday.
This also fixes replace_string() so it won't get into an infinite
loop if the string-to-be-replaced is a substring of the replacement.
That's unlikely to happen in current usage, but the function surely
shouldn't depend on it.
Also fix ecpg_filter() to use a StringInfo and thereby remove its
hard limit of 300 bytes on the length of an ecpg source line.
Asim Rama Praveen and Georgios Kokolatos,
reviewed by Alvaro Herrera and myself
Discussion: https://postgr.es/m/y9Dlk2QhiZ39DhaB1QE9mgZ95HcOQKZCNtGwN7XCRKMdBRBnX_0woaRUtTjloEp4PKA6ERmcUcfq3lPGfKPOJ5xX2TV-5WoRYyySeNHRzdw=@protonmail.com
|
|
They are equivalent, except that StrNCpy() zero-fills the entire
destination buffer instead of providing just one trailing zero. For
all but a tiny number of callers, that's just overhead rather than
being desirable.
Remove StrNCpy() as it is now unused.
In some cases, namestrcpy() is the more appropriate function to use.
While we're here, simplify the API of namestrcpy(): Remove the return
value, don't check for NULL input. Nothing was using that anyway.
Also, remove a few unused name-related functions.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/44f5e198-36f6-6cdb-7fa9-60e34784daae%402ndquadrant.com
|
|
A couple of test cases had connect_timeout=14, a value that seems
to have been plucked from a hat. While it's more than sufficient
for normal cases, slow/overloaded buildfarm machines can get a timeout
failure here, as per recent report from "sungazer". Increase to 180
seconds, which is in line with our typical timeouts elsewhere in
the regression tests.
Back-patch to 9.6; the code looks different in 9.5, and this doesn't
seem to be quite worth the effort to adapt to that.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=sungazer&dt=2020-08-04%2007%3A12%3A22
|
|
This ought to work much like C's "#elif defined(name)"; but the code
implemented it in a way equivalent to endif followed by ifdef, so that
it didn't matter whether any previous branch of the IF construct had
succeeded. Fix that; add some test cases covering elif and nested IFs;
and improve the documentation, which also seemed a bit confused.
AFAICS the code has been like this since the feature was added in 1999
(commit b57b0e044). So while it's surely wrong, there might be code
out there relying on the current behavior. Hence, don't back-patch
into stable branches. It seems all right to fix it in v13 though.
Per report from Ashutosh Sharma. Reviewed by Ashutosh Sharma and
Michael Meskes.
Discussion: https://postgr.es/m/CAE9k0P=dQk9X0cU2tN49S7a9tv733-e1pVdpB1P-pWJ5PdTktg@mail.gmail.com
|
|
Some code paths dedicated to bytea used the structure for varchar. This
did not lead to any actual bugs, as bytea and varchar have the same
definition, but it could become a trap if one of these definitions
changes for a new feature or a bug fix.
Issue introduced by 050710b.
Author: Shenhao Wang
Reviewed-by: Vignesh C, Michael Paquier
Discussion: https://postgr.es/m/07ac7dee1efc44f99d7f53a074420177@G08CNEXMBPEKD06.g08.fujitsu.local
Backpatch-through: 12
|
|
Author: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
|
|
Commit 54cd4f045 added some kluges to work around an old glibc bug,
namely that %.*s could misbehave if glibc thought any characters in
the supplied string were incorrectly encoded. Now that we use our
own snprintf.c implementation, we need not worry about that bug (even
if it still exists in the wild). Revert a couple of particularly
ugly hacks, and remove or improve assorted comments.
Note that there can still be encoding-related hazards here: blindly
clipping at a fixed length risks producing wrongly-encoded output
if the clip splits a multibyte character. However, code that's
doing correct multibyte-aware clipping doesn't really need a comment
about that, while code that isn't needs an explanation why not,
rather than a red-herring comment about an obsolete bug.
Discussion: https://postgr.es/m/279428.1593373684@sss.pgh.pa.us
|
|
access_method, database_name, and index_name are all just name, and
they are not used consistently for their alleged purpose, so remove
them. They have been around since ancient times but have no current
reason for existing. Removing them can simplify future grammar
refactoring.
Discussion: https://www.postgresql.org/message-id/flat/163c00a5-f634-ca52-fc7c-0e53deda8735%402ndquadrant.com
|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 031ca65d7825c3e539a3e62ea9d6630af12e6b6b
|
|
Thomas Munro fixed a longstanding annoyance in pg_bsd_indent, that
it would misformat lines containing IsA() macros on the assumption
that the IsA() call should be treated like a cast. This improves
some other cases involving field/variable names that match typedefs,
too. The only places that get worse are a couple of uses of the
OpenSSL macro STACK_OF(); we'll gladly take that trade-off.
Discussion: https://postgr.es/m/20200114221814.GA19630@alvherre.pgsql
|
|
Includes some manual cleanup of places that pgindent messed up,
most of which weren't per project style anyway.
Notably, it seems some people didn't absorb the style rules of
commit c9d297751, because there were a bunch of new occurrences
of function calls with a newline just after the left paren, all
with faulty expectations about how the rest of the call would get
indented.
|
|
The additional pain from level 4 is excessive for the gain.
Also revert all the source annotation changes to their original
wordings, to avoid back-patching pain.
Discussion: https://postgr.es/m/31166.1589378554@sss.pgh.pa.us
|
|
Use it at level 4, a bit more restrictive than the default level, and
tweak our commanding comments to FALLTHROUGH.
(However, leave zic.c alone, since it's external code; to avoid the
warnings that would appear there, change CFLAGS for that file in the
Makefile.)
Author: Julien Rouhaud <rjuju123@gmail.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/20200412081825.qyo5vwwco3fv4gdo@nol
Discussion: https://postgr.es/m/flat/E1fDenm-0000C8-IJ@gemulon.postgresql.org
|
