| Age | Commit message (Collapse) | Author |
|---|
|
This fixes an overflow error when using the numeric * operator if the
result has more than 16383 digits after the decimal point by rounding
the result. Overflow errors should only occur if the result has too
many digits *before* the decimal point.
Discussion: https://postgr.es/m/CAEZATCUmeFWCrq2dNzZpRj5+6LfN85jYiDoqm+ucSXhb9U2TbA@mail.gmail.com
|
|
When sending queries in pipeline mode, we were careless about leaving
the connection in the right state so that PQgetResult would behave
correctly; trying to read further results after sending a query after
having read a result with an error would sometimes hang. Fix by
ensuring internal libpq state is changed properly. All the state
changes were being done by the callers of pqAppendCmdQueueEntry(); it
would have become too repetitious to have this logic in each of them, so
instead put it all in that function and relieve callers of the
responsibility.
Add a test to verify this case. Without the code fix, this new test
hangs sometimes.
Also, document that PQisBusy() would return false when no queries are
pending result. This is not intuitively obvious, and NULL would be
obtained by calling PQgetResult() at that point, which is confusing.
Wording by Boris Kolpackov.
In passing, fix bogus use of "false" to mean "0", per Ranier Vilela.
Backpatch to 14.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Discussion: https://postgr.es/m/boris.20210624103805@codesynthesis.com
|
|
Commit 7266d0997 added code to pull up simple constant function
results, converting the RTE_FUNCTION RTE to a dummy RTE_RESULT
RTE since it no longer need be scanned. But I forgot to clear
the LATERAL flag if the RTE has it set. If the function reduced
to a constant, it surely contains no lateral references so this
simplification is logically OK. It's needed because various other
places will Assert that RESULT RTEs aren't LATERAL.
Per bug #17097 from Yaoguang Chen. Back-patch to v13 where the
faulty code came in.
Discussion: https://postgr.es/m/17097-3372ef9f798fc94f@postgresql.org
|
|
The separate libldap_r is gone and libldap itself is now always
thread-safe. Unfortunately there seems no easy way to tell by
inspection whether libldap is thread-safe, so we have to take
it on faith that libldap is thread-safe if there's no libldap_r.
That should be okay, as it appears that libldap_r was a standard
part of the installation going back at least 20 years.
Report and patch by Adrian Ho. Back-patch to all supported
branches, since people might try to build any of them with
a newer OpenLDAP.
Discussion: https://postgr.es/m/17083-a19190d9591946a7@postgresql.org
|
|
Since the executor can't cope with a utility statement appearing
as a node of a plan tree, we can't support cases where a rewrite
rule inserts a NOTIFY into an INSERT/UPDATE/DELETE command appearing
in a WITH clause of a larger query. (One can imagine ways around
that, but it'd be a new feature not a bug fix, and so far there's
been no demand for it.) RewriteQuery checked for this, but it
missed the case where the DML command rewrites to *only* a NOTIFY.
That'd lead to crashes later on in planning. Add the missed check,
and improve the level of testing of this area.
Per bug #17094 from Yaoguang Chen. It's been busted since WITH
was introduced, so back-patch to all supported branches.
Discussion: https://postgr.es/m/17094-bf15dff55eaf2e28@postgresql.org
|
|
Commit 6753333f stopped using semaphores as the sleep/wake mechanism for
heavyweight locks, but some obsolete references to that scheme remained
in comments. As with similar commit 25b93a29, back-patch all the way.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CA%2BhUKGLafjB1uzXcy%3D%3D2L3cy7rjHkqOVn7qRYGBjk%3D%3DtMJE7Yg%40mail.gmail.com
|
|
Due to how pg_size_pretty(bigint) was implemented, it's possible that when
given a negative number of bytes that the returning value would not match
the equivalent positive return value when given the equivalent positive
number of bytes. This was due to two separate issues.
1. The function used bit shifting to convert the number of bytes into
larger units. The rounding performed by bit shifting is not the same as
dividing. For example -3 >> 1 = -2, but -3 / 2 = -1. These two
operations are only equivalent with positive numbers.
2. The half_rounded() macro rounded towards positive infinity. This meant
that negative numbers rounded towards zero and positive numbers rounded
away from zero.
Here we fix #1 by dividing the values instead of bit shifting. We fix #2
by adjusting the half_rounded macro always to round away from zero.
Additionally, adjust the pg_size_pretty(numeric) function to be more
explicit that it's using division rather than bit shifting. A casual
observer might have believed bit shifting was used due to a static
function being named numeric_shift_right. However, that function was
calculating the divisor from the number of bits and performed division.
Here we make that more clear. This change is just cosmetic and does not
affect the return value of the numeric version of the function.
Here we also add a set of regression tests both versions of
pg_size_pretty() which test the values directly before and after the
function switches to the next unit.
This bug was introduced in 8a1fab36a. Prior to that negative values were
always displayed in bytes.
Author: Dean Rasheed, David Rowley
Discussion: https://postgr.es/m/CAEZATCXnNW4HsmZnxhfezR5FuiGgp+mkY4AzcL5eRGO4fuadWg@mail.gmail.com
Backpatch-through: 9.6, where the bug was introduced.
|
|
Commit 03ffc4d6d added logic to bypass all caching behavior in
LookupOpclassInfo when CLOBBER_CACHE_ALWAYS is enabled. It doesn't
look like I stopped to think much about what that would cost, but
recent investigation shows that the cost is enormous: it roughly
doubles the time needed for cache-clobber test runs.
There does seem to be value in this behavior when trying to test
the opclass-cache loading logic itself, but for other purposes the
cost is excessive. Hence, let's back off to doing this only when
debug_invalidate_system_caches_always is at least 3; or in older
branches, when CLOBBER_CACHE_RECURSIVELY is defined.
While here, clean up some other minor issues in LookupOpclassInfo.
Re-order the code so we aren't left with broken cache entries (leading
to later core dumps) in the unlikely case that we suffer OOM while
trying to allocate space for a new entry. (That seems to be my
oversight in 03ffc4d6d.) Also, in >= v13, stop allocating one array
entry too many. That's evidently left over from sloppy reversion in
851b14b0c.
Back-patch to all supported branches, mainly to reduce the runtime
of cache-clobbering buildfarm animals.
Discussion: https://postgr.es/m/1370856.1625428625@sss.pgh.pa.us
|
|
In 741d7f104, I tried to make the reports from canceled steps come out
after the pg_cancel_backend() steps, since that was the most common
ordering before. However, that doesn't ensure that a canceled step
doesn't report even later, as shown in a recent failure on buildfarm
member idiacanthus. Rather than complicating things even more with
additional annotations, let's just force the cancel's effect to be
reported first. It's not *that* unnatural-looking.
Back-patch to v14 where these test cases appeared.
Report: https://buildfarm.postgresql.org/cgi-bin/show_log.pl?nm=idiacanthus&dt=2021-07-02%2001%3A40%3A04
|
|
The existing code tried to do syscache lookups in an already-failed
transaction, which is problematic to say the least. After some
consideration of alternatives, the best fix seems to be to just drop
type names from the error message altogether. The table and column
names seem like sufficient localization. If the user is unsure what
types are involved, she can check the local and remote table
definitions.
Having done that, we can also discard the LogicalRepTypMap hash
table, which had no other use. Arguably, LOGICAL_REP_MSG_TYPE
replication messages are now obsolete as well; but we should
probably keep them in case some other use emerges. (The complexity
of removing something from the replication protocol would likely
outweigh any savings anyhow.)
Masahiko Sawada and Bharath Rupireddy, per complaint from Andres
Freund. Back-patch to v10 where this code originated.
Discussion: https://postgr.es/m/20210106020229.ne5xnuu6wlondjpe@alap3.anarazel.de
|
|
Commit 4656e3d66 replaced the "#define CLOBBER_CACHE_ALWAYS"
testing mechanism with a GUC, which has been a great help for
doing cache-clobber testing in more efficient ways; but there
is a gap in the implementation. The only way to do cache-clobber
testing during an initdb run is to use the old method with #define,
because one can't set the GUC from outside. Improve this by
adding a switch to initdb for the purpose.
(Perhaps someday we should let initdb pass through arbitrary
"-c NAME=VALUE" switches. Quoting difficulties dissuaded me
from attempting that right now, though.)
Back-patch to v14 where 4656e3d66 came in.
Discussion: https://postgr.es/m/1582507.1624227029@sss.pgh.pa.us
|
|
Commit 0e69f705cc1a introduced code to analyze partitioned table;
however, that code fails to preserve pg_class.relhasindex correctly.
Fix by observing whether any indexes exist rather than accidentally
falling through to assuming none do.
Backpatch to 14.
Author: Alexander Pyhalov <a.pyhalov@postgrespro.ru>
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
Reviewed-by: Zhihong Yu <zyu@yugabyte.com>
Discussion: https://postgr.es/m/CALNJ-vS1R3Qoe5t4tbzxrkpBtzRbPq1dDcW4RmA_a+oqweF30w@mail.gmail.com
|
|
The prove_installcheck recipe in src/Makefile.global.in was emitting
bogus paths for a couple of elements when used with PGXS. Here we create
a separate recipe for the PGXS case that does it correctly. We also take
the opportunity to make the make the file more readable by breaking up
the prove_installcheck and prove_check recipes across several lines, and
to remove the setting for REGRESS_SHLIB to src/test/recovery/Makefile,
which is the only set of tests that actually need it.
Backpatch to all live branches
Discussion: https://postgr.es/m/f2401388-936b-f4ef-a07c-a0bcc49b3300@dunslane.net
|
|
A few variables have been using 10 as a magic constant while
PG_STAT_GET_REPLICATION_SLOT_COLS can be used instead.
Author: Masahiko Sawada
Reviewed-By: Amit Kapila
Backpatch-through: 14, where it was introduced
Discussion: https://postgr.es/m/CAD21AoBvqODDfmD17DkEuPCvV2KbruukXQ2Vwrv5Xi-TsAsTJA@mail.gmail.com
|
|
Until now, we didn't allow to stream the changes in logical replication
till we receive speculative confirm or the next DML change record after
speculative inserts. The reason was that we never use to process
speculative aborts but after commit 4daa140a2f it is possible to process
them so we can allow streaming once we receive speculative abort after
speculative insertion.
We decided to backpatch to 14 where the feature for streaming in progress
transactions have been introduced as this is a minor change and makes that
functionality better.
Author: Amit Kapila
Reviewed-By: Dilip Kumar
Backpatch-through: 14
Discussion: https://postgr.es/m/CAA4eK1KdqmTCtrBR6oFfGELrLLbDLDedL6zACcsUOQuTJBj1vw@mail.gmail.com
|
|
Reaching PITR on such a transaction would cause the generation of a LOG
message mentioning a transaction committed, not aborted.
Oversight in 4f1b890.
Author: Simon Riggs
Discussion: https://postgr.es/m/CANbhV-GJ6KijeCgdOrxqMCQ+C8QiK657EMhCy4csjrPcEUFv_Q@mail.gmail.com
Backpatch-through: 9.6
|
|
* Fix enumeration of the multirange operators in calc_multirangesel() and
calc_multirangesel() switches.
* Add more regression tests for matching to empty ranges/multiranges.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/c5269c65-f967-77c5-ff7c-15e621c47f6a%40gmail.com
Author: Alexander Korotkov
Backpatch-through: 14, where multiranges were introduced
|
|
The original coding required that PQpipelineSync had been called before
the first call to PQgetResult, and failure to do that would result in an
unexpected NULL result being returned. Fix by setting the right state
when a query is sent, rather than leaving it unchanged and having
PQpipelineSync apply the necessary state change.
A new test case to verify the behavior is added, which relies on the new
PQsendFlushRequest() function added by commit a7192326c74d.
Backpatch to 14, where pipeline mode was added.
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/boris.20210616110321@codesynthesis.com
|
|
This new libpq function allows the application to send an 'H' message,
which instructs the server to flush its outgoing buffer.
This hasn't been needed so far because the Sync message already requests
a buffer; and I failed to realize that this was needed in pipeline mode
because PQpipelineSync also causes the buffer to be flushed. However,
sometimes it is useful to request a flush without establishing a
synchronization point.
Backpatch to 14, where pipeline mode was introduced in libpq.
Reported-by: Boris Kolpackov <boris@codesynthesis.com>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106252350.t76x73nt643j@alvherre.pgsql
|
|
Commit efbfb6424 added logic for reporting exactly which existing
partition conflicts when complaining that a new hash partition's
modulus isn't compatible with the existing ones. However, it
misunderstood the partitioning data structure, and would select
the wrong partition in some cases, or crash outright due to fetching
a bogus table OID in other cases.
Per bug #17076 from Alexander Lakhin. Fix by Amit Langote;
some further work on the code comments by me.
Discussion: https://postgr.es/m/17076-89a16ae835d329b9@postgresql.org
|
|
Causing a core dump on out-of-memory seems pretty unfriendly,
and surely is far outside the expected behavior of a general-purpose
library. Just print an error message (as we did already) and return.
These functions unfortunately don't have an error return convention,
but code using them is probably just looking for a quick-n-dirty
print method and wouldn't bother to check anyway.
Although these functions are semi-deprecated, it still seems
appropriate to back-patch this. In passing, also back-patch
b90e6cef1, just to reduce cosmetic differences between the
branches.
Discussion: https://postgr.es/m/3122443.1624735363@sss.pgh.pa.us
|
|
Instead use the common/int.h functions to check for integer overflow
in a more C-standard-compliant fashion. This is motivated by recent
failures on buildfarm member moonjelly, where it appears that
development-tip gcc is optimizing without regard to the -fwrapv
switch. Presumably that's a gcc bug that will be fixed soon, but
we might as well install cleaner coding here rather than wait.
(This does not address the question of whether we'll ever be able
to get rid of using -fwrapv. Testing shows that this spot is the
only place where doing so creates visible regression test failures,
but unfortunately that proves very little.)
Back-patch to v12. The common/int.h functions exist in v11, but
that branch doesn't use them in any client-side code. I judge
that this case isn't interesting enough in the real world to take
even a small risk of issues from being the first such use.
Tom Lane and Fabien Coelho
Discussion: https://postgr.es/m/73927.1624815543@sss.pgh.pa.us
|
|
Along the way make a slight adjustment to
src/include/utils/queryjumble.h to avoid an unused typedef.
|
|
|
|
We were using RelationGetIndexList() to update the relation's replica
identity index but instead, we can directly use RelationGetReplicaIndex()
which uses the same functionality. This is a minor code readability
improvement.
Author: Japin Li
Reviewed-By: Takamichi Osumi, Amit Kapila
Discussion: https://postgr.es/m/4C99A862-69C8-431F-960A-81B1151F1B89@enterprisedb.com
|
|
When we cannot immediately acquire XactSLRULock in exclusive mode at
commit time, we add ourselves to a list of processes that need their XIDs
status update. We do this if the clog page where we need to update the
current transaction status is the same as the group leader's clog page,
otherwise, we allow the caller to clear it by itself. Now, when we can't
add ourselves to any group, we were not clearing the current proc if it
has already become a member of some group which was leading to an
assertion failure when the same proc was assigned to another backend after
the current backend exits.
Reported-by: Alexander Lakhin
Bug: 17072
Author: Amit Kapila
Tested-By: Alexander Lakhin
Backpatch-through: 11, where it was introduced
Discussion: https://postgr.es/m/17072-2f8764857ef2c92a@postgresql.org
|
|
The setting has no effect except during startup. It's still nice to be
able to change it dynamically, which is expected to be pretty useful to
an admin following crash recovery when restarting the cluster is not so
appealing.
Per discussions following commits 2941138e6 and 61752afb2.
Author: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20210529192321.GM2082%40telsasoft.com
|
|
copy_data is not a supported option with this sub-command of ALTER
SUBSCRIPTION, which would not make a variable related to it initialized
after parsing the option set in DefElems. A refresh could then refer to
it.
Author: Ranier Vilela
Reviewed-by: Peter Smith
Discussion: https://postgr.es/m/CAEudQAp5P8nr=ze2Gv=BMj=DJFZnrvendZCZcC-fos3QiDe2sg@mail.gmail.com
|
|
83158f7 has improved index_set_state_flags() so as it is possible to use
transactional updates when updating pg_index state flags, but there was
not really a test case which stressed directly the possibility it fixed.
This commit adds such a test, using a predicate that looks valid in
appearance but calls a stable function.
Author: Andrey Lepikhov
Discussion: https://postgr.es/m/9b905019-5297-7372-0ad2-e1a4bb66a719@postgrespro.ru
Backpatch-through: 9.6
|
|
specscanner.l leaked a kilobyte of memory per token of the spec file.
Apparently somebody thought that the introductory code block would be
executed once; but it's once per yylex() call.
A couple of functions in isolationtester.c leaked small amounts of
memory due to not bothering to free one-time allocations. Might
as well improve these so that valgrind gives this program a clean
bill of health. Also get rid of an ugly static variable.
Coverity complained about one of the one-time leaks, which led me
to try valgrind'ing isolationtester, which led to discovery of the
larger leak.
|
|
Take some untranslatable things out of the message and replace by
format placeholders, to reduce translatable strings and reduce
translation mistakes.
|
|
Commit c0cb87fbb unwisely introduced a dependency on the StringInfo
machinery in fe-connect.c. We must not use that in libpq, because
it will do a summary exit(1) if it hits OOM, and that is not
appropriate behavior for a general-purpose library. The goal of
allowing arbitrary line lengths in service files doesn't seem like
it's worth a lot of effort, so revert back to the previous method
of using a stack-allocated buffer and failing on buffer overflow.
This isn't an exact revert though. I kept that patch's refactoring
to have a single exit path, as that seems cleaner than having each
error path know what to do to clean up. Also, I made the fixed-size
buffer 1024 bytes not 256, just to push off the need for an expandable
buffer some more.
There is more to do here; in particular the lack of any mechanical
check for this type of mistake now seems pretty hazardous. But this
fix gets us back to the level of robustness we had in v13, anyway.
Discussion: https://postgr.es/m/daeb22ec6ca8ef61e94d766a9b35fb03cabed38e.camel@vmware.com
|
|
The version string is grabbed from PACKAGE_VERSION in pg_config.h in the
MSVC build since 8f4fb4c6, but an error message referenced a variable
that existed before that. This had no consequences except if one messes
up enough with the version number of the build.
Author: Anton Voloshin
Discussion: https://postgr.es/m/af79ee1b-9962-b299-98e1-f90a289e19e6@postgrespro.ru
Backpatch-through: 13
|
|
002_pgbench_no_server was printing some array pointers instead of the
actual contents of those arrays for the expected outputs of stdout and
stderr for a tested command. This does not add any new information that
can help with debugging as the test names allow to track failure
locations, if any.
This commit simply removes those logs as the rest of the printed
information is redundant with command_checks_all().
Per discussion with Andrew Dunstan and Álvaro Herrera.
Discussion: https://postgr.es/m/YNXNFaG7IgkzZanD@paquier.xyz
Backpatch-through: 11
|
|
It's not really necessary for this function to open or lock the
relation associated with the pg_policy entry it's modifying. The
error checks it's making on the rel are if anything counterproductive
(e.g., if we don't want to allow installation of policies on system
catalogs, here is not the place to prevent that). In particular, it
seems just wrong to insist on an ownership check. That has the net
effect of forcing people to use superuser for DROP OWNED BY, which
surely is not an effect we want. Also there is no point in rebuilding
the dependencies of the policy expressions, which aren't being
changed. Lastly, locking the table also seems counterproductive; it's
not helping to prevent race conditions, since we failed to re-read the
pg_policy row after acquiring the lock. That means that concurrent
DDL would likely result in "tuple concurrently updated/deleted"
errors; which is the same behavior this code will produce, with less
overhead.
Per discussion of bug #17062. Back-patch to all supported versions,
as the failure cases this eliminates seem just as undesirable in 9.6
as in HEAD.
Discussion: https://postgr.es/m/1573181.1624220108@sss.pgh.pa.us
|
|
This fixes a couple of problems within the so-said code of this commit
subject:
- Replace the use of open() with slurp_file(), fixing an issue reported
by buildfarm member fairywren whose perl installation keep around CRLF
characters, causing the matching patterns for the logs to fail.
- Remove the eval block, which is not really necessary.
This set of issues has come into light after fixing a different issue
with c13585fe, and this is wrong since this code has been introduced.
Reported-by: Andrew Dunstan, and buildfarm member fairywren
Author: Michael Paquier
Reviewed-by: Andrew Dunstan
Discussion: https://postgr.es/m/0f49303e-7784-b3ee-200b-cbf67be2eb9e@dunslane.net
Backpatch-through: 11
|
|
|
|
ALTER SUBSCRIPTION DROP PUBLICATION does not actually support
copy_data option, so remove it from tab completion.
Also, reword the error message that is thrown when all the
publications from a subscription are specified to be dropped.
Also, made few doc and cosmetic adjustments.
Author: Vignesh C <vignesh21@gmail.com>
Reviewed-by: Bharath Rupireddy <bharath.rupireddy@enterprisedb.com>
Reviewed-by: Japin Li <japinli@hotmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CALDaNm21RwsDzs4xj14ApteAF7auyyomHNnp+NEL-sH8m-jMvQ@mail.gmail.com
|
|
In gistinitpage, pageSize variable looks redundant, instead just
pass BLCKSZ. This will be consistent with its peers BloomInitPage,
brin_page_init and SpGistInitPage.
Author: Bharath Rupireddy <bharath.rupireddy@enterprisedb.com>
Discussion: https://www.postgresql.org/message-id/flat/CALj2ACWj=V1k5591eeZK2sOg2FYuBUp6azFO8tMkBtGfXf8PMQ@mail.gmail.com
|
|
fairywren is not happy with the pattern checks introduced by c13585f.
I am not sure if this outlines a bug in pgbench or if the regex patterns
used in the tests are too restrictive for this buildfarm member's
environment. This adds more debugging information to show the log
entries that do not match with the expected pattern, to help in finding
out what's happening. That seems like a good addition in the long-term
anyway as that may not be the only issue in this area.
Discussion: https://postgr.es/m/YNUad2HvgW+6eXyo@paquier.xyz
|
|
The main goal of this option is to allow inspecting temporary files for
debugging purposes, so moving the parameter there is natural.
Oversight in cd91de0.
Reported-by: Justin Pryzby
Author: Euler Taveira
Discussion: https://postgr.es/m/20210612004347.GP16435@telsasoft.com
|
|
LLVM 13 (due out in September) has changed the semantics of
LLVMOrcAbsoluteSymbols(), so we need to bump some reference counts to
avoid a double-free that causes crashes and bad query results.
A proactive change seems necessary to avoid having a window of time
where our respective latest releases would interact badly. It's
possible that the situation could change before then, though.
Thanks to Fabien Coelho for monitoring bleeding edge LLVM and Andres
Freund for tracking down the change.
Back-patch to 11, where the JIT code arrived.
Discussion: https://postgr.es/m/CA%2BhUKGLEy8mgtN7BNp0ooFAjUedDTJj5dME7NxLU-m91b85siA%40mail.gmail.com
|
|
The logic checking for the format of per-thread logs used grep() with
directly "$re", which would cause the test to consider all the logs as
a match without caring about their format at all. Using "/$re/" makes
grep() perform a regex test, which is what we want here.
While on it, improve some of the tests to be more picky with the
patterns expected and add more comments to describe the tests.
Issue discovered while digging into a separate patch.
Author: Fabien Coelho, Michael Paquier
Discussion: https://postgr.es/m/YNPsPAUoVDCpPOGk@paquier.xyz
Backpatch-through: 11
|
|
In previous commit, I missed that relmap_redo() was also not acquiring the
RelationMappingLock. Thanks to Thomas Munro for pointing that out.
Backpatch-through: 9.6, like previous commit.
Discussion: https://www.postgresql.org/message-id/CA%2BhUKGLev%3DPpOSaL3WRZgOvgk217et%2BbxeJcRr4eR-NttP1F6Q%40mail.gmail.com
|
|
Contrary to the comment here, POSIX does not guarantee atomicity of a
read(), if another process calls write() concurrently. Or at least Linux
does not. Add locking to load_relmap_file() to avoid the race condition.
Fixes bug #17064. Thanks to Alexander Lakhin for the report and test case.
Backpatch-through: 9.6, all supported versions.
Discussion: https://www.postgresql.org/message-id/17064-bb0d7904ef72add3@postgresql.org
|
|
For no obvious reason, isolationtester has always insisted that
session and step names be written with double quotes. This is
fairly tedious and does little for test readability, especially
since the names that people actually choose almost always look
like normal identifiers. Hence, let's tweak the lexer to allow
SQL-like identifiers not only double-quoted strings.
(They're SQL-like, not exactly SQL, because I didn't add any
case-folding logic. Also there's no provision for U&"..." names,
not that anyone's likely to care.)
There is one incompatibility introduced by this change: if you write
"foo""bar" with no space, that used to be taken as two identifiers,
but now it's just one identifier with an embedded quote mark.
I converted all the src/test/isolation/ specfiles to remove
unnecessary double quotes, but stopped there because my
eyes were glazing over already.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/759113.1623861959@sss.pgh.pa.us
|
|
Our uses of gss_display_status() and gss_display_name() assumed
that the gss_buffer_desc strings returned by those functions are
null-terminated. It appears that they generally are, given the
lack of field complaints up to now. However, the available
documentation does not promise this, and some man pages
for gss_display_status() show examples that rely on the
gss_buffer_desc.length field instead of expecting null
termination. Also, we now have a report that on some
implementations, clang's address sanitizer is of the opinion
that the byte after the specified length is undefined.
Hence, change the code to rely on the length field instead.
This might well be cosmetic rather than fixing any real bug, but
it's hard to be sure, so back-patch to all supported branches.
While here, also back-patch the v12 changes that made pg_GSS_error
deal honestly with multiple messages available from
gss_display_status.
Per report from Sudheer H R.
Discussion: https://postgr.es/m/5372B6D4-8276-42C0-B8FB-BD0918826FC3@tekenlight.com
|
|
Previously, isolationtester displayed SQL query results using some
ad-hoc code that clearly hadn't had much effort expended on it.
Field values longer than 14 characters weren't separated from
the next field, and usually caused misalignment of the columns
too. Also there was no visual separation of a query's result
from subsequent isolationtester output. This made test result
files confusing and hard to read.
To improve matters, let's use libpq's PQprint() function. Although
that's long since unused by psql, it's still plenty good enough
for the purpose here.
Like 741d7f104, back-patch to all supported branches, so that this
isn't a stumbling block for back-patching isolation test changes.
Discussion: https://postgr.es/m/582362.1623798221@sss.pgh.pa.us
|
|
The code to signal a running walsender when its reserved WAL size grows
too large is completely uncovered before this commit; this adds coverage
for that case.
This test involves sending SIGSTOP to walsender and walreceiver, then
advancing enough WAL for a checkpoint to trigger, then sending SIGCONT.
There's no precedent for STOP signalling in Perl tests, and my reading
of relevant manpages says it's likely to fail on Windows. Because of
this, this test is always skipped on that platform.
This version fixes a couple of rarely hit race conditions in the
previous attempt 09126984a263; most notably, both LOG string searches
are loops, not just the second one; we acquire the start-of-log position
before STOP-signalling; and reference the correct process name in the
test description. All per Tom Lane.
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/202106102202.mjw4huiix7lo@alvherre.pgsql
|
|
We've long contended with isolation test results that aren't entirely
stable. Some test scripts insert long delays to try to force stable
results, which is not terribly desirable; but other erratic failure
modes remain, causing unrepeatable buildfarm failures. I've spent a
fair amount of time trying to solve this by improving the server-side
support code, without much success: that way is fundamentally unable
to cope with diffs that stem from chance ordering of arrival of
messages from different server processes.
We can improve matters on the client side, however, by annotating
the test scripts themselves to show the desired reporting order
of events that might occur in different orders. This patch adds
three types of annotations to deal with (a) test steps that might or
might not complete their waits before the isolationtester can see them
waiting; (b) test steps in different sessions that can legitimately
complete in either order; and (c) NOTIFY messages that might arrive
before or after the completion of a step in another session. We might
need more annotation types later, but this seems to be enough to deal
with the instabilities we've seen in the buildfarm. It also lets us
get rid of all the long delays that were previously used, cutting more
than a minute off the runtime of the isolation tests.
Back-patch to all supported branches, because the buildfarm
instabilities affect all the branches, and because it seems desirable
to keep isolationtester's capabilities the same across all branches
to simplify possible future back-patching of tests.
Discussion: https://postgr.es/m/327948.1623725828@sss.pgh.pa.us
|
