| Age | Commit message (Collapse) | Author |
|---|
|
In common cases, foreign keys are defined on the toplevel partitioned
table; but if instead one is defined on a partition and references a
partitioned table, and the referencing partition is detached, we would
examine the pg_constraint row on the partition being detached, and fail
to realize that the sub-constraints must be left alone. This causes the
ALTER TABLE DETACH process to fail with
ERROR: could not find ON INSERT check triggers of foreign key constraint NNN
This is similar but not quite the same as what was fixed by
53af9491a043. This bug doesn't affect branches earlier than 15, because
the detach procedure was different there, so we only backpatch down to
15.
Fix by skipping such modifying constraints that are children of other
constraints being detached.
Author: Amul Sul <sulamul@gmail.com>
Diagnosys-by: Sami Imseih <samimseih@gmail.com>
Discussion: https://postgr.es/m/CAAJ_b97GuPh6wQPbxQS-Zpy16Oh+0aMv-w64QcGrLhCOZZ6p+g@mail.gmail.com
|
|
DST law changes in Paraguay.
Historical corrections for the Philippines.
Backpatch-through: 13
|
|
The freshly-released 2025a version of tzdata has a refined estimate
for the longitude of Manila, changing their value for LMT in
pre-standardized-timezone days. This changes the output of one of
our test cases. Since we need to be able to run with system tzdata
files that may or may not contain this update, we'd better stop
making that specific test.
I switched it to use Asia/Singapore, which has a roughly similar UTC
offset. That LMT value hasn't changed in tzdb since 2003, so we can
hope that it's well established.
I also noticed that this set of make_timestamptz tests only exercises
zones east of Greenwich, which seems rather sad, and was not the
original intent AFAICS. (We've already changed these tests once
to stabilize their results across tzdata updates, cf 66b737cd9;
it looks like I failed to consider the UTC-offset-sign aspect then.)
To improve that, add a test with Pacific/Honolulu. That LMT offset
is also quite old in tzdb, so we'll cross our fingers that it doesn't
get improved.
Reported-by: Christoph Berg <cb@df7cb.de>
Discussion: https://postgr.es/m/Z46inkznCxesvDEb@msg.df7cb.de
Backpatch-through: 13
|
|
If a WaitEventSetWait() caller asks for multiple events, an already set
latch would previously prevent other events from being reported at the
same time. Now, we'll also poll the kernel for other events that would
fit in the caller's output buffer with a zero wait time. This policy
change doesn't affect callers that ask for only one event.
The main caller affected is the postmaster. If its latch is set
extremely frequently by backends launching workers and workers exiting,
we don't want it to handle only those jobs and ignore incoming client
connections.
Back-patch to 16 where the postmaster began using the API. The
fast-return policy changed here is older than that, but doesn't cause
any known problems in earlier releases.
Reported-by: Nathan Bossart <nathandbossart@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://postgr.es/m/Z1n5UpAiGDmFcMmd%40nathan
|
|
XLogPageRead() checks immediately for an invalid WAL record header on a
standby, to be able to handle the case of continuation records that need
to be read across two different sources. As written, the check was too
generic, applying to any target LSN. Based on an analysis by Kyotaro
Horiguchi, what really matters is to make sure that the page header is
checked when attempting to read a LSN at the boundary of a segment, to
handle the case of a continuation record that spawns across multiple
pages when dealing with multiple segments, as WAL receivers are spawned
they request WAL from the beginning of a segment. This fix has been
proposed by Kyotaro Horiguchi.
This could cause standbys to loop infinitely when dealing with a
continuation record during a timeline jump, in the case where the
contents of the record in the follow-up page are invalid.
Some regression tests are added to check such scenarios, able to
reproduce the original problem. In the test, the contents of a
continuation record are overwritten with junk zeros on its follow-up
page, and replayed on standbys. This is inspired by 039_end_of_wal.pl,
and is enough to show how standbys should react on promotion by not
being stuck. Without the fix, the test would fail with a timeout. The
test to reproduce the problem has been written by Alexander Kukushkin.
The original check has been introduced in 066871980183, for a similar
problem.
Author: Kyotaro Horiguchi, Alexander Kukushkin
Reviewed-by: Michael Paquier
Discussion: https://postgr.es/m/CAFh8B=mozC+e1wGJq0H=0O65goZju+6ab5AU7DEWCSUA2OtwDg@mail.gmail.com
Backpatch-through: 13
|
|
This commit reverts 8f67f994e8ea (down to v13) and c3de0f9eed38 (down to
v17), as these are proving to not be completely correct regarding two
aspects:
- In v17 and newer branches, c3de0f9eed38's check for epoch handling is
incorrect, and does not correctly handle frozen epochs. A logic closer
to widen_snapshot_xid() should be used. The 2PC code should try to
integrate deeper with FullTransactionIds, 5a1dfde8334b being not enough.
- In v13 and newer branches, 8f67f994e8ea is a workaround for the real
issue, which is that we should not attempt CLOG lookups without reaching
consistency. This exists since 728bd991c3c4, and this is reachable with
ProcessTwoPhaseBuffer() called by restoreTwoPhaseData() at the beginning
of recovery.
Per discussion with Noah Misch.
Discussion: https://postgr.es/m/20250116010051.f3.nmisch@google.com
Backpatch-through: 13
|
|
We should run the expression subtrees of PartitionedRelPruneInfo
structs through fix_scan_expr. Failure to do so means that
AlternativeSubPlans within those expressions won't be cleaned up
properly, resulting in "unrecognized node type" errors since v14.
It seems fairly likely that at least some of the other steps done
by fix_scan_expr are important here as well, resulting in as-yet-
undetected bugs. Therefore, I've chosen to back-patch this to
all supported branches including v13, even though the known
symptom doesn't manifest in v13.
Per bug #18778 from Alexander Lakhin.
Discussion: https://postgr.es/m/18778-24cd399df6c806af@postgresql.org
|
|
These facilities were originally in the recovery TAP test
039_end_of_wal.pl. A follow-up bug fix with a TAP test doing similar
WAL manipulations requires them, and all these had better not be
duplicated due to their complexity. The routine names are tweaked to
use "wal" more consistently, similarly to the existing "advance_wal".
In v14 and v13, the new routines are moved to PostgresNode.pm.
039_end_of_wal.pl is updated to use the refactored routines, without
changing its coverage.
Reviewed-by: Alexander Kukushkin
Discussion: https://postgr.es/m/CAFh8B=mozC+e1wGJq0H=0O65goZju+6ab5AU7DEWCSUA2OtwDg@mail.gmail.com
Backpatch-through: 13
|
|
In the name of ABI stability (that is, to avoid a library major
version bump for libpq), libpq still exports a version of pqsignal()
that we no longer want to use ourselves. However, since that has
the same link name as the function exported by src/port/pqsignal.c,
there is a link ordering dependency determining which version will
actually get used by code that uses libpq as well as libpgport.a.
It now emerges that the wrong version has been used by pgbench and
psql since commit 06843df4a rearranged their link commands. This
can result in odd failures in pgbench with the -T switch, since its
SIGALRM handler will now not be marked SA_RESTART. psql may have
some edge-case problems in \watch, too.
Since we don't want to depend on link ordering effects anymore,
let's fix this in the same spirit as b6c7cfac8: use macros to change
the actual link names of the competing functions. We cannot change
legacy-pqsignal.c's exported name of course, so the victim has to be
src/port/pqsignal.c.
In master, rename its exported name to be pqsignal_fe in frontend or
pqsignal_be in backend. (We could perhaps have gotten away with using
the same symbol in both cases, but since the FE and BE versions now
work a little differently, it seems advisable to use different names.)
In back branches, rename to pqsignal_fe in frontend but keep it as
pqsignal in backend. The frontend change could affect third-party
code that is calling pqsignal from libpgport.a or libpgport_shlib.a,
but only if the code is compiled against port.h from a different minor
release than libpgport. Since we don't support using libpgport as a
shared library, it seems unlikely that there will be such a problem.
I left the backend symbol unchanged to avoid an ABI break for
extensions. This means that the link ordering hazard still exists
for any extension that links against libpq. However, none of our own
extensions use both pqsignal() and libpq, and we're not making things
any worse for third-party extensions that do.
Report from Andy Fan, diagnosis by Fujii Masao, patch by me.
Back-patch to all supported branches, as 06843df4a was.
Discussion: https://postgr.es/m/87msfz5qv2.fsf@163.com
|
|
The ecpg command includes code to warn about unsupported COPY FROM STDIN
statements in input files. However, since commit 3d009e45bd,
this functionality has been broken due to a bug introduced in that commit,
causing ecpg to fail to detect the statement.
This commit resolves the issue, restoring ecpg's ability to detect
COPY FROM STDIN and issue a warning as intended.
Back-patch to all supported versions.
Author: Ryo Kanbayashi
Reviewed-by: Hayato Kuroda, Tom Lane
Discussion: https://postgr.es/m/CANOn0Ez_t5uDCUEV8c1YORMisJiU5wu681eEVZzgKwOeiKhkqQ@mail.gmail.com
|
|
If a new catalog tuple is inserted that belongs to a catcache list
entry, and cache invalidation happens while the list entry is being
built, the list entry might miss the newly inserted tuple.
To fix, change the way we detect concurrent invalidations while a
catcache entry is being built. Keep a stack of entries that are being
built, and apply cache invalidation to those entries in addition to
the real catcache entries. This is similar to the in-progress list in
relcache.c.
Back-patch to all supported versions.
Reviewed-by: Noah Misch
Discussion: https://www.postgresql.org/message-id/2234dc98-06fe-42ed-b5db-ac17384dc880@iki.fi
|
|
This function expects an "int64" as result and stores the number of
pages to add to the index scan bitmap as an "int", multiplying its final
result by 10. For a relation large enough, this can theoretically
overflow if counting more than (INT32_MAX / 10) pages, knowing that the
number of pages is upper-bounded by MaxBlockNumber.
To avoid the overflow, this commit redefines "totalpages", used to
calculate the result, to be an "int64" rather than an "int".
Reported-by: Evgeniy Gorbanyov
Author: James Hunter
Discussion: https://www.postgresql.org/message-id/07704817-6fa0-460c-b1cf-cd18f7647041@basealt.ru
Backpatch-through: 13
|
|
Commit 27a1f8d108 missed updating the max HBA option count to
account for the new option added. Fix by bumping the counter
and adjust the relevant comment to match. Backpatch down to
all supported branches like the erroneous commit.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/286764.1736697356@sss.pgh.pa.us
Backpatch-through: v13
|
|
When deparsing a JsonExpr, variable names in the PASSING clause were
not quoted. However, since they are parsed as ColLabel tokens, some
variable names require double quotes to ensure that they are properly
interpreted. Fix by using quote_identifier() in the deparsing code.
This oversight was limited to the SQL/JSON query functions
JSON_EXISTS(), JSON_QUERY(), and JSON_VALUE().
Back-patch to v17, where these functions were added.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCXTpAS%3DncfLNTZ7YS6O5puHeLg_SUYAit%2Bcs7wsrd9Msg%40mail.gmail.com
|
|
When deparsing an XMLTABLE() expression, XML namespace names were not
quoted. However, since they are parsed as ColLabel tokens, some names
require double quotes to ensure that they are properly interpreted.
Fix by using quote_identifier() in the deparsing code.
Back-patch to all supported versions.
Dean Rasheed, reviewed by Tom Lane.
Discussion: https://postgr.es/m/CAEZATCXTpAS%3DncfLNTZ7YS6O5puHeLg_SUYAit%2Bcs7wsrd9Msg%40mail.gmail.com
|
|
PLy_spi_execute_plan (PLyPlan.execute) and PLy_cursor_plan
(plpy.cursor) use PLy_output_convert to convert Python values
into Datums that can be passed to the query-to-execute. But they
failed to pay much attention to its warning that it can leave "cruft
generated along the way" behind. Repeated use of these methods can
result in a substantial memory leak for the duration of the calling
plpython function.
To fix, make a temporary memory context to invoke PLy_output_convert
in. This also lets us get rid of the rather fragile code that was
here for retail pfree's of the converted Datums. Indeed, we don't
need the PLyPlanObject.values field anymore at all, though I left it
in place in the back branches in the name of ABI stability.
Mat Arye and Tom Lane, per report from Mat Arye. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/CADsUR0DvVgnZYWwnmKRK65MZg7YLUSTDLV61qdnrwtrAJgU6xw@mail.gmail.com
|
|
The ldapscheme option was missed when inspecing the HbaLine for
assembling rows for the pg_hba_file_rules function. Backpatch
to all supported versions.
Author: Laurenz Albe <laurenz.albe@cybertec.at>
Reported-by: Laurenz Albe <laurenz.albe@cybertec.at>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Bug: 18769
Discussion: https://postgr.es/m/18769-dd8610cbc0405172@postgresql.org
Backpatch-through: v13
|
|
66c0185a3 gave the planner the ability to have union child queries
provide the union planner with pre-sorted input so that UNION queries
could be more efficiently implemented using Merge Append.
That commit overlooked checking that the UNION target list and the union
child target list's types all match. In some corner cases, this could
result in the planner producing sorts using the sort operator of the
top-level UNION's target list type rather than of the union child's
target list's type. The implications of this range from silently
working correctly, despite using the wrong sort operator all the way up
to a segmentation fault.
Here we fix by adjusting the planner so it makes no attempt to have the
subquery produce pre-sorted results when the data type of the UNION
target list and the types from the subquery target list don't match
exactly.
Backpatch to 17, where 66c0185a3 was introduced.
Reported-by: Jason Smith <dqetool@126.com>
Diagnosed-by: Tom Lane <tgl@sss.pgh.pa.us>
Bug: 18764
Discussion: https://postgr.es/m/18764-63ad667ea26e877a%40postgresql.org
Backpatch-through: 17
|
|
This error message stated the privileges required to add a member
to a group even if the user was trying to drop a member:
postgres=> alter group a drop user b;
ERROR: permission denied to alter role
DETAIL: Only roles with the ADMIN option on role "a" may add members.
Since the required privileges for both operations are the same, we
can fix this by modifying the message to mention both adding and
dropping members:
postgres=> alter group a drop user b;
ERROR: permission denied to alter role
DETAIL: Only roles with the ADMIN option on role "a" may add or drop members.
Author: ChangAo Chen
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/tencent_FAA0D00E3514AAF0BBB6322542A6094FEF05%40qq.com
Backpatch-through: 16
|
|
The originally submitted code (using bit masking) was correct when the
number of slots was restricted to be a power of two -- but that
limitation was removed during development that led to commit
53c2a97a9266, which made the bank selection code incorrect. This led to
always using a smaller number of banks than available. Change said code
to use integer modulo instead, which works correctly with an arbitrary
number of banks.
It's likely that we could improve on this to avoid runtime use of
integer division. But with this change we're, at least, not wasting
memory on unused banks, and more banks mean less contention, which is
likely to have a much higher performance impact than a single
instruction's latency.
Author: Yura Sokolov <y.sokolov@postgrespro.ru>
Reviewed-by: Andrey Borodin <x4mmm@yandex-team.ru>
Discussion: https://postgr.es/m/9444dc46-ca47-43ed-9058-89c456316306@postgrespro.ru
|
|
walmethods.c used off_t to navigate around a pg_wal.tar file that could
exceed 2GB, which doesn't work on Windows and would fail with misleading
errors. Use pgoff_t instead.
Back-patch to all supported branches.
Author: Davinder Singh <davinder.singh@enterprisedb.com>
Reported-by: Jakub Wartak <jakub.wartak@enterprisedb.com>
Discussion: https://postgr.es/m/CAKZiRmyM4YnokK6Oenw5JKwAQ3rhP0YTz2T-tiw5dAQjGRXE3Q%40mail.gmail.com
|
|
Change our ftruncate() macro to use the 64-bit variant of chsize(), and
add a new macro to redirect lseek() to _lseeki64().
Back-patch to all supported releases, in preparation for a bug fix.
Tested-by: Davinder Singh <davinder.singh@enterprisedb.com>
Discussion: https://postgr.es/m/CAKZiRmyM4YnokK6Oenw5JKwAQ3rhP0YTz2T-tiw5dAQjGRXE3Q%40mail.gmail.com
|
|
Commit 66aaabe7 (branches 13 - 17 only) was not acceptable to the Oracle
Developer Studio compiler on build farm animal wrasse. It accidentally
used a C++ style return statement to wrap a void function. None of the
usual compilers complained, but it is right, that is not allowed in C.
Fix.
Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/Z33vgfVgvOnbFLN9%40paquier.xyz
|
|
It's possible that external code is calling smgrtruncate(). Any
external callers might like to consider the recent changes to
RelationTruncate(), but commit 38c579b0 should not have changed the
function prototype in the back-branches, per ABI stability policy.
Restore smgrtruncate()'s traditional argument list in the back-branches,
but make it a wrapper for a new function smgrtruncate2(). The three
callers in core can use smgrtruncate2() directly. In master (18-to-be),
smgrtruncate2() is effectively renamed to smgrtruncate(), so this wart
is cleaned up.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKG%2BThae6x6%2BjmQiuALQBT2Ae1ChjMh1%3DkMvJ8y_SBJZrvA%40mail.gmail.com
|
|
Commit f4b54e1ed9, which introduced macros for protocol characters,
missed updating a couple of places in postgres.c.
Author: Dave Cramer
Reviewed-by: Fabrízio de Royes Mello
Discussion: https://postgr.es/m/CADK3HHJUVBPoVOmFesPB-fN8_dYt%2BQELV2UB6jxOW2Z40qF-qw%40mail.gmail.com
Backpatch-through: 17
|
|
The originals are ambiguous and a bit out of style.
Reviewed-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/202412141243.efesjyyvzxsz@alvherre.pgsql
|
|
These are also present in procnumber.h
Reported-by: Peter Eisentraut
Discussion: https://www.postgresql.org/message-id/bd04d675-4672-4f87-800a-eb5d470c15fc@eisentraut.org
|
|
When looking up statistical data about an expression, we do not need
to concern ourselves with the outer joins that could null the
Vars/PHVs contained in the expression. Accounting for nullingrels in
the expression could cause estimate_num_groups to count the same Var
multiple times if it's marked with different nullingrels. This is
incorrect, and could lead to "ERROR: corrupt MVNDistinct entry" when
searching for multivariate n-distinct.
Furthermore, the nullingrels could prevent us from matching an
expression to expressional index columns or to the expressions in
extended statistics, leading to inaccurate estimates.
To fix, strip out all the nullingrels from the expression before we
look up statistical data about it. There is one ensuing plan change
in the regression tests, but it looks reasonable and does not
compromise its original purpose.
This patch could result in plan changes, but it fixes an actual bug,
so back-patch to v16 where the outer-join-aware-Var infrastructure was
introduced.
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs4-2Z4k+nFTiZe0Qbu5n8juUWenDAtMzi98bAZQtwHx0-w@mail.gmail.com
|
|
pgoutput caches the attribute map of a relation, that is free()'d only
when validating a RelationSyncEntry. However, this code path is not
taken when calling any of the SQL functions able to do some logical
decoding, like pg_logical_slot_{get,peek}_changes(), leaking some memory
into CacheMemoryContext on repeated calls.
To address this, a relation's attribute map is allocated in
PGOutputData's cachectx, free()'d at the end of the execution of these
SQL functions when logical decoding ends. This is available down to 15.
v13 and v14 have a similar leak, which will be dealt with later.
Reported-by: Masahiko Sawada
Author: Vignesh C
Reviewed-by: Hou Zhijie
Discussion: https://postgr.es/m/CAD21AoDkAhQVSukOfH3_reuF-j4EU0-HxMqU3dU+bSTxsqT14Q@mail.gmail.com
Discussion: https://postgr.es/m/CALDaNm1hewNAsZ_e6FF52a=9drmkRJxtEPrzCB6-9mkJyeBBqA@mail.gmail.com
Backpatch-through: 15
|
|
At the beginning of recovery, an orphaned two-phase file in an epoch
different than the one defined in the checkpoint record could not be
removed based on the assumptions that AdjustToFullTransactionId() relies
on, assuming that all files would be either from the current epoch or
from the previous epoch.
If the checkpoint epoch was 0 while the 2PC file was orphaned and in the
future, AdjustToFullTransactionId() would underflow the epoch used to
build the 2PC file path. In non-assert builds, this would create a
WARNING message referring to a 2PC file with an epoch of "FFFFFFFF" (or
UINT32_MAX), as an effect of the underflow calculation, leaving the
orphaned file around.
Some tests are added with dummy 2PC files in the past and the future,
checking that these are properly removed.
Issue introduced by 5a1dfde8334b, that has switched two-phase state
files to use FullTransactionIds.
Reported-by: Vitaly Davydov
Author: Michael Paquier
Reviewed-by: Vitaly Davydov
Discussion: https://postgr.es/m/13b5b6-676c3080-4d-531db900@47931709
Backpatch-through: 17
|
|
Before 728bd991c3c4, that has improved the support for 2PC files during
recovery, the initial logic scanning files in pg_twophase was done so as
files in the future of the transaction ID horizon were checked first,
followed by a check if a transaction ID is aborted or committed which
could involve a pg_xact lookup. After this commit, these checks have
been done in reverse order.
Files detected as in the future do not have a state that can be checked
in pg_xact, hence this caused recovery to fail abruptly should an
orphaned 2PC file in the future of the transaction ID horizon exist in
pg_twophase at the beginning of recovery.
A test is added to check for this scenario, using an empty 2PC with a
transaction ID large enough to be in the future when running the test.
This test is added in 16 and older versions for now. 17 and newer
versions are impacted by a second bug caused by the addition of the
epoch in the 2PC file names. An equivalent test will be added in these
branches in a follow-up commit, once the second set of issues reported
are fixed.
Author: Vitaly Davydov, Michael Paquier
Discussion: https://postgr.es/m/11e597-676ab680-8d-374f23c0@145466129
Backpatch-through: 13
|
|
Cause parallel workers to not check datallowconn, rolcanlogin, and
ACL_CONNECT privileges. The leader already checked these things
(except for rolcanlogin which might have been checked for a different
role). Re-checking can accomplish little except to induce unexpected
failures in applications that might not even be aware that their query
has been parallelized. We already had the principle that parallel
workers rely on their leader to pass a valid set of authorization
information, so this change just extends that a bit further.
Also, modify the ReservedConnections, datconnlimit and rolconnlimit
logic so that these limits are only enforced against regular backends,
and only regular backends are counted while checking if the limits
were already reached. Previously, background processes that had an
assigned database or role were subject to these limits (with rather
random exclusions for autovac workers and walsenders), and the set of
existing processes that counted against each limit was quite haphazard
as well. The point of these limits, AFAICS, is to ensure the
availability of PGPROC slots for regular backends. Since all other
types of processes have their own separate pools of PGPROC slots, it
makes no sense either to enforce these limits against them or to count
them while enforcing the limit.
While edge-case failures of these sorts have been possible for a
long time, the problem got a good deal worse with commit 5a2fed911
(CVE-2024-10978), which caused parallel workers to make some of these
checks using the leader's current role where before we had used its
AuthenticatedUserId, thus allowing parallel queries to fail after
SET ROLE. The previous behavior was fairly accidental and I have
no desire to return to it.
This patch includes reverting 73c9f91a1, which was an emergency hack
to suppress these same checks in some cases. It wasn't complete,
as shown by a recent bug report from Laurenz Albe. We can also revert
fd4d93d26 and 492217301, which hacked around the same problems in one
regression test.
In passing, remove the special case for autovac workers in
CheckMyDatabase; it seems cleaner to have AutoVacWorkerMain pass
the INIT_PG_OVERRIDE_ALLOW_CONNS flag, now that that does what's
needed.
Like 5a2fed911, back-patch to supported branches (which sadly no
longer includes v12).
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
|
|
The need for this was missed in commit 93db6cbda, with the result
being that if we launch a slotsync worker it would consume one of
the PGPROCs in the max_connections pool. That could lead to inability
to launch the worker, or to subsequent failures of connection requests
that should have succeeded according to the configured settings.
Rather than create some one-off infrastructure to support this,
let's group the slotsync worker with the existing autovac launcher
in a new category of "special worker" processes. These are kind of
like auxiliary processes, but they cannot use that infrastructure
because they need to be able to run transactions.
For the moment, make these processes share the PGPROC freelist
used for autovac workers (which previously supplied the autovac
launcher too). This is partly to avoid an ABI change in v17,
and partly because it seems silly to have a freelist with
at most two members. This might be worth revisiting if we grow
enough workers in this category.
Tom Lane and Hou Zhijie. Back-patch to v17.
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
|
|
These two platforms have a remarkably tight default limit on the
number of SysV semaphores in the system: SEMMNS is only 60
out-of-the-box. Unless manual action is taken to raise that,
we'll only be able to allocate 3 sets of 16 usable semaphores
each, leading to initdb setting max_connections to just 20.
That's problematic because the core regression tests expect
to be able to launch 20 concurrent sessions, leaving us with
no headroom. This seems to be the cause of intermittent
buildfarm failures on some machines.
While there's no getting around the fact that you'd better raise
SEMMNS for production use on these platforms, it does seem desirable
for "make check" to pass reliably without that. We can make that
happen, at least for awhile longer, with two small changes:
* Change sysv_sema.c's SEMAS_PER_SET to 19, so that we can eat up
all of the available semas not just most of them.
* Change initdb to make the smallest max_connections value it will
consider be 25 not 20.
This is a back-patch of recent HEAD commit 38da05346 into v17.
The motivation for doing this now is that an upcoming bug-fix
patch will give the new-in-17 slotsync worker process its own
reserved PGPROC and hence also semaphore. With that patch but
without this change, v17 would fail to start at all under the
default SEMMNS on these platforms.
Discussion: https://postgr.es/m/db2773a2-aca0-43d0-99c1-060efcd9954e@gmail.com
Discussion: https://postgr.es/m/1808397.1735156190@sss.pgh.pa.us
|
|
Commit aac2c9b4fde889d13f859c233c2523345e72d32b mandated such locking
and attempted to fulfill that mandate, but it missed REASSIGN OWNED.
Hence, it remained possible to lose VACUUM's inplace update of
datfrozenxid if a REASSIGN OWNED processed that database at the same
time. This didn't affect the other inplace-updated catalog, pg_class.
For pg_class, REASSIGN OWNED calls ATExecChangeOwner() instead of the
generic AlterObjectOwner_internal(), and ATExecChangeOwner() fulfills
the locking mandate.
Like in GRANT, implement this by following the locking protocol for any
catalog subject to the generic AlterObjectOwner_internal(). It would
suffice to do this for IsInplaceUpdateOid() catalogs only. Back-patch
to v13 (all supported versions).
Kirill Reshke. Reported by Alexander Kukushkin.
Discussion: https://postgr.es/m/CAFh8B=mpKjAy4Cuun-HP-f_vRzh2HSvYFG3rhVfYbfEBUhBAGg@mail.gmail.com
|
|
This fixes "unresolved external symbol" errors with extensions that
use functions from libpgport that need special CFLAGS to
compile. Currently, that includes the CRC-32 functions.
Commit 2571c1d5cc did this for libcommon, but I missed that libpqport
has the same issue.
Reported-by: Tom Lane
Backpatch-through: 16, where Meson was introduced
Discussion: https://www.postgresql.org/message-id/CAOdR5yF0krWrxycA04rgUKCgKugRvGWzzGLAhDZ9bzNv8g0Lag@mail.gmail.com
|
|
This fixes "unresolved external symbol" errors with extensions that
use functions from libcommon. This was reported with pgvector.
Reported-by: Andrew Kane
Author: Vladlen Popolitov
Backpatch-through: 16, where Meson was introduced
Discussion: https://www.postgresql.org/message-id/CAOdR5yF0krWrxycA04rgUKCgKugRvGWzzGLAhDZ9bzNv8g0Lag@mail.gmail.com
|
|
The pgoutput module caches publication names in a list and frees it upon
invalidation. However, the code forgot to free the actual publication
names within the list elements, as publication names are pstrdup()'d in
GetPublication(). This would cause memory to leak in
CacheMemoryContext, bloating it over time as this context is not
cleaned.
This is a problem for WAL senders running for a long time, as an
accumulation of invalidation requests would bloat its cache memory
usage. A second case, where this leak is easier to see, involves a
backend calling SQL functions like pg_logical_slot_{get,peek}_changes()
which create a new decoding context with each execution. More
publications create more bloat.
To address this, this commit adds a new memory context within the
logical decoding context and resets it each time the publication names
cache is invalidated, based on a suggestion from Amit Kapila. This
ensures that the lifespan of the publication names aligns with that of
the logical decoding context.
Contrary to the HEAD-only commit f0c569d71515 that has changed
PGOutputData to track this new child memory context, the context is
tracked with a static variable whose state is reset with a MemoryContext
reset callback attached to PGOutputData->context, so as ABI
compatibility is preserved in stable branches. This approach is based
on an suggestion from Amit Kapila.
Analyzed-by: Michael Paquier, Jeff Davis
Author: Masahiko Sawada
Reviewed-by: Amit Kapila, Michael Paquier, Euler Taveira, Hou Zhijie
Discussion: https://postgr.es/m/Z0khf9EVMVLOc_YY@paquier.xyz
Backpatch-through: 13
|
|
GetSnapshotData() set TransactionXmin = MyProc->xmin, but when
SnapshotResetXmin() advanced MyProc->xmin, it did not advance
TransactionXmin correspondingly. That meant that TransactionXmin could
be older than MyProc->xmin, and XIDs between than TransactionXmin and
the real MyProc->xmin could be vacuumed away. One known consequence is
in pg_subtrans lookups: we might try to look up the status of an XID
that was already truncated away.
Back-patch to all supported versions.
Reviewed-by: Andres Freund
Discussion: https://www.postgresql.org/message-id/d27a046d-a1e4-47d1-a95c-fbabe41debb4@iki.fi
|
|
RelationTruncate() does three things, while holding an
AccessExclusiveLock and preventing checkpoints:
1. Logs the truncation.
2. Drops buffers, even if they're dirty.
3. Truncates some number of files.
Step 2 could previously be canceled if it had to wait for I/O, and step
3 could and still can fail in file APIs. All orderings of these
operations have data corruption hazards if interrupted, so we can't give
up until the whole operation is done. When dirty pages were discarded
but the corresponding blocks were left on disk due to ERROR, old page
versions could come back from disk, reviving deleted data (see
pgsql-bugs #18146 and several like it). When primary and standby were
allowed to disagree on relation size, standbys could panic (see
pgsql-bugs #18426) or revive data unknown to visibility management on
the primary (theorized).
Changes:
* WAL is now unconditionally flushed first
* smgrtruncate() is now called in a critical section, preventing
interrupts and causing PANIC on file API failure
* smgrtruncate() has a new parameter for existing fork sizes,
because it can't call smgrnblocks() itself inside a critical section
The changes apply to RelationTruncate(), smgr_redo() and
pg_truncate_visibility_map(). That last is also brought up to date with
other evolutions of the truncation protocol.
The VACUUM FileTruncate() failure mode had been discussed in older
reports than the ones referenced below, with independent analysis from
many people, but earlier theories on how to fix it were too complicated
to back-patch. The more recently invented cancellation bug was
diagnosed by Alexander Lakhin. Other corruption scenarios were spotted
by me while iterating on this patch and earlier commit 75818b3a.
Back-patch to all supported releases.
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reported-by: rootcause000@gmail.com
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/18146-04e908c662113ad5%40postgresql.org
Discussion: https://postgr.es/m/18426-2d18da6586f152d6%40postgresql.org
|
|
Consistently reset so->scanBehind at the beginning of nbtree array
advancement, even during sktrig_required=false calls (calls where array
advancement is triggered by an unsatisfied non-required array scan key).
Otherwise, it's possible for queries to fail to return all relevant
tuples to the scan given a low-order required scan key that was
previously deemed "satisfied" by a truncated high key attribute value.
This only happened at the point where a later non-required array scan
key needed to be "advanced" once on the next leaf page (that is, once
the right sibling of the truncated high key page was reached).
The underlying issue was that later code within _bt_advance_array_keys
assumed that the so->scanBehind flag must have been set using the
current page's high key (not the previous page's high key). Any later
successful recheck call to _bt_check_compare would therefore spuriously
be prevented from making _bt_advance_array_keys return true, based on
the faulty belief that the truncated attribute must be from the scan's
current tuple (i.e. the non-pivot tuple at the start of the next page).
_bt_advance_array_keys would return false for the tuple, ultimately
resulting in _bt_checkkeys failing to return a matching tuple.
Oversight in commit 5bf748b8, which enhanced nbtree ScalarArrayOp
execution.
Author: Peter Geoghegan <pg@bowt.ie>
Discussion: https://postgr.es/m/CAH2-WzkJKncfqyAUTeuB5GgRhT1vhsWO2q11dbZNqKmvjopP_g@mail.gmail.com
Backpatch: 17-, where commit 5bf748b8 first appears.
|
|
If the non-recursive part of a recursive CTE ended up using
TTSOpsBufferHeapTuple as the table slot type, then a duplicate value
could cause an Assert failure in CheckOpSlotCompatibility() when
checking the hash table for the duplicate value. The expected slot type
for the deform step was TTSOpsMinimalTuple so the Assert failed when the
TTSOpsBufferHeapTuple slot was used.
This is a long-standing bug which we likely didn't notice because it
seems much more likely that the non-recursive term would have required
projection and used a TTSOpsVirtual slot, which CheckOpSlotCompatibility
is ok with.
There doesn't seem to be any harm done here other than the Assert
failure. Both TTSOpsMinimalTuple and TTSOpsBufferHeapTuple slot types
require tuple deformation, so the EEOP_*_FETCHSOME ExprState step would
have properly existed in the ExprState.
The solution is to pass NULL for the ExecBuildGroupingEqual's 'lops'
parameter. This means the ExprState's EEOP_*_FETCHSOME step won't
expect a fixed slot type. This makes CheckOpSlotCompatibility() happy as
no checking is performed when the ExprEvalStep is not expecting a fixed
slot type.
Reported-by: Richard Guo
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/CAMbWs4-8U9q2LAtf8+ghV11zeUReA3AmrYkxzBEv0vKnDxwkKA@mail.gmail.com
Backpatch-through: 13, all supported versions
|
|
EndCompressorZstd() neglected to free everything. This was
most visible with a lot of large objects in the dump.
Per report from Tomasz Szypowski. Back-patch to v16
where this code came in.
Discussion: https://postgr.es/m/DU0PR04MB94193D038A128EF989F922D199042@DU0PR04MB9419.eurprd04.prod.outlook.com
|
|
If a dshash table grows very large (e.g., the dshash table for
cumulative statistics when there are millions of tables), resizing
it may fail with an error like:
ERROR: invalid DSA memory alloc request size 1073741824
To fix, permit dshash resizing to allocate more than 1 GB by
providing the DSA_ALLOC_HUGE flag.
Reported-by: Andreas Scherbaum
Author: Matthias van de Meent
Reviewed-by: Cédric Villemain, Michael Paquier, Andres Freund
Discussion: https://postgr.es/m/80a12d59-0d5e-4c54-866c-e69cd6536471%40pgug.de
Backpatch-through: 13
|
|
Commit b43757171470 allowed parallel builds for BRIN, but left behind
two comments claiming only btree indexes support parallel builds.
Reported by Egor Rogov, along with similar issues in SGML docs.
Backpatch to 17, where parallel builds for BRIN were introduced.
Reported-by: Egor Rogov
Backpatch-through: 17
Discussion: https://postgr.es/m/114e2d5d-125e-07d8-94aa-5ad175fb7443@postgrespro.ru
|
|
The test was creating both the dumps to compare from the same database
on the same node, so it would never detect any mismatches when comparing
the logical dumps of the two servers.
Fixing this issue has revealed that there is a difference in the dumps:
the tablespaces paths are different. This commit uses compare_text()
with a custom comparison function to erase the difference (slightly
tweaked to be able to work with WIN32 and non-WIN32 paths). This way,
the non-relevant parts of the tablespace path are ignored from the check
with the basic structure of the query string still compared.
Author: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87h67653ns.fsf@wibble.ilmari.org
Backpatch-through: 17
|
|
The test failed if you ran the regression tests with TEMP_CONFIG with
recovery_min_apply_delay = '500ms'. Fix the race condition by waiting
for transaction to be applied in the replica, like in a few other
tests.
The failing test was introduced in commit cbfbda7841. Backpatch to all
supported versions like that commit (except v12, which is no longer
supported).
Reported-by: Alexander Lakhin
Discussion: https://www.postgresql.org/message-id/09e2a70a-a6c2-4b5c-aeae-040a7449c9f2@gmail.com
|
|
An \if command appearing within a false (not-to-be-executed) \if
branch was incorrectly treated the same as \elif. This could allow
statements within the inner \if to be executed when they should
not be. Also the missing inner \if stack entry would result in an
assertion failure (in assert-enabled builds) when the final \endif
is reached.
Report and patch by Michail Nikolaev. Back-patch to all
supported branches.
Discussion: https://postgr.es/m/CANtu0oiA1ke=SP6tauhNqkUdv5QFsJtS1p=aOOf_iU+EhyKkjQ@mail.gmail.com
|
|
If an owned sequence is considered interesting, force its owning
table to be marked interesting too. This ensures, in particular,
that we'll fetch the owning table's column names so we have the
data needed for ALTER TABLE ... ADD GENERATED. Previously there were
edge cases where pg_dump could get SIGSEGV due to not having filled in
the column names. (The known case is where the owning table has been
made part of an extension while its identity sequence is not a member;
but there may be others.)
Also, if it's an identity sequence, force its dumped-components mask
to exactly match the owning table: dump definition only if we're
dumping the table's definition, dump data only if we're dumping the
table's data, etc. This generalizes the code introduced in commit
b965f2617 that set the sequence's dump mask to NONE if the owning
table's mask is NONE. That's insufficient to prevent failures,
because for example the table's mask might only request dumping ACLs,
which would lead us to still emit ALTER TABLE ADD GENERATED even
though we didn't create the table. It seems better to treat an
identity sequence as though it were an inseparable aspect of the
table, matching the treatment used in the backend's dependency logic.
Perhaps this policy needs additional refinement, but let's wait to
see some field use-cases before changing it further.
While here, add a comment in pg_dump.h warning against writing tests
like "if (dobj->dump == DUMP_COMPONENT_NONE)", which was a bug in this
case. There is one other example in getPublicationNamespaces, which
if it's not a bug is at least remarkably unclear and under-documented.
Changing that requires a separate discussion, however.
Per report from Artur Zakirov. Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAKNkYnwXFBf136=u9UqUxFUVagevLQJ=zGd5BsLhCsatDvQsKQ@mail.gmail.com
|
|
This reverts commit 562bee0fc13dc95710b8db6a48edad2f3d052f2e.
We received a report from the field about this change in behavior,
so it seems best to revert this commit and to add proper
multibyte-aware truncation as a follow-up exercise.
Fixes bug #18711.
Reported-by: Adam Rauch
Reviewed-by: Tom Lane, Bertrand Drouvot, Bruce Momjian, Thomas Munro
Discussion: https://postgr.es/m/18711-7503ee3e449d2c47%40postgresql.org
Backpatch-through: 17
|
