| Age | Commit message (Collapse) | Author |
|---|
|
Tcl 9 changed several API functions to take Tcl_Size, which is
ptrdiff_t, instead of int, for 64-bit enablement. We have to change a
few local variables to be compatible with that. We also provide a
fallback typedef of Tcl_Size for older Tcl versions.
The affected variables are used for quantities that will not approach
values beyond the range of int, so this doesn't change any
functionality.
Reviewed-by: Tristan Partin <tristan@partin.io>
Discussion: https://www.postgresql.org/message-id/flat/bce0fe54-75b4-438e-b42b-8e84bc7c0e9c%40eisentraut.org
|
|
Previously we checked "for <stdbool.h> that conforms to C99" using
autoconf's AC_HEADER_STDBOOL macro. We've required C99 since PostgreSQL
12, so the test was redundant, and under C23 it was broken: autoconf
2.69's implementation doesn't understand C23's new empty header (the
macros it's looking for went away, replaced by language keywords).
Later autoconf versions fixed that, but let's just remove the
anachronistic test.
HAVE_STDBOOL_H and HAVE__BOOL will no longer be defined, but they
weren't directly tested in core or likely extensions (except in 11, see
below). PG_USE_STDBOOL (or USE_STDBOOL in 11 and 12) is still defined
when sizeof(bool) is 1, which should be true on all modern systems.
Otherwise we define our own bool type and values of size 1, which would
fail to compile under C23 as revealed by the broken test. (We'll
probably clean that dead code up in master, but here we want a minimal
back-patchable change.)
This came to our attention when GCC 15 recently started using using C23
by default and failed to compile the replacement code, as reported by
Sam James and build farm animal alligator.
Back-patch to all supported releases, and then two older versions that
also know about <stdbool.h>, per the recently-out-of-support policy[1].
12 requires C99 so it's much like the supported releases, but 11 only
assumes C89 so it now uses AC_CHECK_HEADERS instead of the overly picky
AC_HEADER_STDBOOL. (I could find no discussion of which historical
systems had <stdbool.h> but failed the conformance test; if they ever
existed, they surely aren't relevant to that policy's goals.)
[1] https://wiki.postgresql.org/wiki/Committing_checklist#Policies
Reported-by: Sam James <sam@gentoo.org>
Reviewed-by: Peter Eisentraut <peter@eisentraut.org> (master version)
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us> (approach)
Discussion: https://www.postgresql.org/message-id/flat/87o72eo9iu.fsf%40gentoo.org
|
|
Apparently this information has been outdated since first committed,
because we adopted a different implementation during development per
reviews and this detail was not updated in the README.
This has been wrong since commit 0ac5ad5134f2 introduced the file in
2013. Backpatch to all live branches.
Reported-by: Will Mortensen <will@extrahop.com>
Discussion: https://postgr.es/m/CAMpnoC6yEQ=c0Rdq-J7uRedrP7Zo9UMp6VZyP23QMT68n06cvA@mail.gmail.com
|
|
Ordinarily transformSetOperationTree will collect all UNION/
INTERSECT/EXCEPT steps into the setOperations tree of the topmost
Query, so that leaf queries do not contain any setOperations.
However, it cannot thus flatten a subquery that also contains
WITH, ORDER BY, FOR UPDATE, or LIMIT. I (tgl) forgot that in
commit 07b4c48b6 and wrote an assertion in rule deparsing that
a leaf's setOperations would always be empty.
If it were nonempty then we would want to parenthesize the subquery
to ensure that the output represents the setop nesting correctly
(e.g. UNION below INTERSECT had better get parenthesized). So
rather than just removing the faulty Assert, let's change it into
an additional case to check to decide whether to add parens. We
don't expect that the additional case will ever fire, but it's
cheap insurance.
Man Zeng and Tom Lane
Discussion: https://postgr.es/m/tencent_7ABF9B1F23B0C77606FC5FE3@qq.com
|
|
In the dim past we figured it was okay to ignore collations
when combining UNION set-operation nodes into a single N-way
UNION operation. I believe that was fine at the time, but
it stopped being fine when we added nondeterministic collations:
the semantics of distinct-ness are affected by those. v17 made
it even less fine by allowing per-child sorting operations to
be merged via MergeAppend, although I think we accidentally
avoided any live bug from that.
Add a check that collations match before deciding that two
UNION nodes are equivalent. I also failed to resist the
temptation to comment plan_union_children() a little better.
Back-patch to all supported branches (v13 now), since they
all have nondeterministic collations.
Discussion: https://postgr.es/m/3605568.1731970579@sss.pgh.pa.us
|
|
fixempties() counts the number of in-arcs in the regex NFA and then
allocates an array of that many arc pointers. If the NFA contains no
arcs, this amounts to malloc(0) for which some platforms return NULL.
The code mistakenly treats that as indicating out-of-memory. Thus,
we can get a bogus "out of memory" failure for some unsatisfiable
regexes.
This happens only in v15 and earlier, since bea3d7e38 switched to
using palloc() rather than bare malloc(). And at least of the
platforms in the buildfarm, only AIX seems to return NULL. So the
impact is pretty narrow. But I don't especially want to ship code
that is failing its own regression tests, so let's fix this for
this week's releases.
A quick code survey says that there is only the one place in
src/backend/regex/ that is at risk of doing malloc(0), so we'll just
band-aid that place. A more future-proof fix could be to install a
malloc() wrapper similar to pg_malloc(). But this code seems unlikely
to change much more in the affected branches, so that's probably
overkill.
The only known test case for this involves a complemented character
class in a bracket expression, for example [^\s\S], and we didn't
support that in v13. So it may be that the problem is unreachable
in v13. But I'm not 100% sure of that, so patch v13 too.
Discussion: https://postgr.es/m/661fd81b-f069-8f30-1a41-e195c57449b4@gmail.com
|
|
After commit 5a2fed911a85ed6d8a015a6bafe3a0d9a69334ae, the catalog state
resulting from these commands ceased to affect sessions. Restore the
longstanding behavior, which is like beginning the session with a SET
ROLE command. If cherry-picking the CVE-2024-10978 fixes, default to
including this, too. (This fixes an unintended side effect of fixing
CVE-2024-10978.) Back-patch to v12, like that commit. The release team
decided to include v12, despite the original intent to halt v12 commits
earlier this week.
Tom Lane and Noah Misch. Reported by Etienne LAFARGE.
Discussion: https://postgr.es/m/CADOZwSb0UsEr4_UTFXC5k7=fyyK8uKXekucd+-uuGjJsGBfxgw@mail.gmail.com
|
|
Previously LogicalIncreaseRestartDecodingForSlot() accidentally
accepted any LSN as the candidate_lsn and candidate_valid after the
restart_lsn of the replication slot was updated, so it potentially
caused the restart_lsn to move backwards.
A scenario where this could happen in logical replication is: after a
logical replication restart, based on previous candidate_lsn and
candidate_valid values in memory, the restart_lsn advances upon
receiving a subscriber acknowledgment. Then, logical decoding restarts
from an older point, setting candidate_lsn and candidate_valid based
on an old RUNNING_XACTS record. Subsequent subscriber acknowledgments
then update the restart_lsn to an LSN older than the current value.
In the reported case, after WAL files were removed by a checkpoint,
the retreated restart_lsn prevented logical replication from
restarting due to missing WAL segments.
This change essentially modifies the 'if' condition to 'else if'
condition within the function. The previous code had an asymmetry in
this regard compared to LogicalIncreaseXminForSlot(), which does
almost the same thing for different fields.
The WAL removal issue was reported by Hubert Depesz Lubaczewski.
Backpatch to all supported versions, since the bug exists since 9.4
where logical decoding was introduced.
Reviewed-by: Tomas Vondra, Ashutosh Bapat, Amit Kapila
Discussion: https://postgr.es/m/Yz2hivgyjS1RfMKs%40depesz.com
Discussion: https://postgr.es/m/85fff40e-148b-4e86-b921-b4b846289132%40vondra.me
Backpatch-through: 13
|
|
The current code calls array_eq() and does not provide FmgrInfo. This commit
provides initialization of FmgrInfo and uses C collation as the safe option
for text comparison because we don't know anything about the semantics of
opclass options.
Backpatch to 13, where opclass options were introduced.
Reported-by: Nicolas Maus
Discussion: https://postgr.es/m/18692-72ea398df3ec6712%40postgresql.org
Backpatch-through: 13
|
|
Commit 5a2fed911 had an unexpected side-effect: the parallel worker
launched for the new test case would fail if it couldn't use a
superuser-reserved connection slot. The reason that test failed
while all our pre-existing ones worked is that the connection
privilege tests in InitPostgres had been based on the superuserness
of the leader's AuthenticatedUserId, but after the rearrangements
of 5a2fed911 we were testing the superuserness of CurrentUserId,
which the new test case deliberately made to be a non-superuser.
This all seems very accidental and probably not the behavior we really
want, but a security patch is no time to be redesigning things.
Pending some discussion about desirable semantics, hack it so that
InitPostgres continues to pay attention to the superuserness of
AuthenticatedUserId when starting a parallel worker.
Nathan Bossart and Tom Lane, per buildfarm member sawshark.
Security: CVE-2024-10978
|
|
TestUpgradeXversion knows how to make the main regression database's
references to pg_regress.so be version-independent. But it doesn't
do that for plperl's database, so that the C function added by
commit b7e3a52a8 is causing cross-version upgrade test failures.
Path of least resistance is to just drop the function at the end
of the new test.
In <= v14, also take the opportunity to clean up the generated
test files.
Security: CVE-2024-10979
|
|
v16 commit 8fe3e697a1a83a722b107c7cb9c31084e1f4d077 used REGRESS_OPTS in
a way needing this. That broke "vcregress plcheck". Back-patch
v16..v12; newer versions don't have this build system.
|
|
v14 and earlier use generated test files, which require being
.gitignore'd to avoid git complaints when testing in-tree.
Security: CVE-2024-10979
|
|
The SQL spec mandates that SET SESSION AUTHORIZATION implies
SET ROLE NONE. We tried to implement that within the lowest-level
functions that manipulate these settings, but that was a bad idea.
In particular, guc.c assumes that it doesn't matter in what order
it applies GUC variable updates, but that was not the case for these
two variables. This problem, compounded by some hackish attempts to
work around it, led to some security-grade issues:
* Rolling back a transaction that had done SET SESSION AUTHORIZATION
would revert to SET ROLE NONE, even if that had not been the previous
state, so that the effective user ID might now be different from what
it had been.
* The same for SET SESSION AUTHORIZATION in a function SET clause.
* If a parallel worker inspected current_setting('role'), it saw
"none" even when it should see something else.
Also, although the parallel worker startup code intended to cope
with the current role's pg_authid row having disappeared, its
implementation of that was incomplete so it would still fail.
Fix by fully separating the miscinit.c functions that assign
session_authorization from those that assign role. To implement the
spec's requirement, teach set_config_option itself to perform "SET
ROLE NONE" when it sets session_authorization. (This is undoubtedly
ugly, but the alternatives seem worse. In particular, there's no way
to do it within assign_session_authorization without incompatible
changes in the API for GUC assign hooks.) Also, improve
ParallelWorkerMain to directly set all the relevant user-ID variables
instead of relying on some of them to get set indirectly. That
allows us to survive not finding the pg_authid row during worker
startup.
In v16 and earlier, this includes back-patching 9987a7bf3 which
fixed a violation of GUC coding rules: SetSessionAuthorization
is not an appropriate place to be throwing errors from.
Security: CVE-2024-10978
|
|
If a CTE, subquery, sublink, security invoker view, or coercion
projection references a table with row-level security policies, we
neglected to mark the plan as potentially dependent on which role
is executing it. This could lead to later executions in the same
session returning or hiding rows that should have been hidden or
returned instead.
Reported-by: Wolfgang Walther
Reviewed-by: Noah Misch
Security: CVE-2024-10976
Backpatch-through: 12
|
|
Many process environment variables (e.g. PATH), bypass the containment
expected of a trusted PL. Hence, trusted PLs must not offer features
that achieve setenv(). Otherwise, an attacker having USAGE privilege on
the language often can achieve arbitrary code execution, even if the
attacker lacks a database server operating system user.
To fix PL/Perl, replace trusted PL/Perl %ENV with a tied hash that just
replaces each modification attempt with a warning. Sites that reach
these warnings should evaluate the application-specific implications of
proceeding without the environment modification:
Can the application reasonably proceed without the modification?
If no, switch to plperlu or another approach.
If yes, the application should change the code to stop attempting
environment modifications. If that's too difficult, add "untie
%main::ENV" in any code executed before the warning. For example,
one might add it to the start of the affected function or even to
the plperl.on_plperl_init setting.
In passing, link to Perl's guidance about the Perl features behind the
security posture of PL/Perl.
Back-patch to v12 (all supported versions).
Andrew Dunstan and Noah Misch
Security: CVE-2024-10979
|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: be7f3c3a26b382c9d7c9d32c7a972e452b56f529
|
|
This commit changes libpq so that errors reported by the backend during
the protocol negotiation for SSL and GSS are discarded by the client, as
these may include bytes that could be consumed by the client and write
arbitrary bytes to a client's terminal.
A failure with the SSL negotiation now leads to an error immediately
reported, without a retry on any other methods allowed, like a fallback
to a plaintext connection.
A failure with GSS discards the error message received, and we allow a
fallback as it may be possible that the error is caused by a connection
attempt with a pre-11 server, GSS encryption having been introduced in
v12. This was a problem only with v17 and newer versions; older
versions discard the error message already in this case, assuming a
failure caused by a lack of support for GSS encryption.
Author: Jacob Champion
Reviewed-by: Peter Eisentraut, Heikki Linnakangas, Michael Paquier
Security: CVE-2024-10977
Backpatch-through: 12
|
|
Commit ac04aa84a put the shutoff for this into the planner, which is
not ideal because it doesn't prevent us from re-using a previously
made parallel plan. Revert the planner change and instead put the
shutoff into InitializeParallelDSM, modeling it on the existing code
there for recovering from failure to allocate a DSM segment.
However, that code path is mostly untested, and testing a bit harder
showed there's at least one bug: ExecHashJoinReInitializeDSM is not
prepared for us to have skipped doing parallel DSM setup. I also
thought the Assert in ReinitializeParallelWorkers is pretty
ill-advised, and replaced it with a silent Min() operation.
The existing test case added by ac04aa84a serves fine to test this
version of the fix, so no change needed there.
Patch by me, but thanks to Noah Misch for the core idea that we
could shut off worker creation when !INTERRUPTS_CAN_BE_PROCESSED.
Back-patch to v12, as ac04aa84a was.
Discussion: https://postgr.es/m/CAC-SaSzHUKT=vZJ8MPxYdC_URPfax+yoA1hKTcF4ROz_Q6z0_Q@mail.gmail.com
|
|
If the collation of any join key column doesn’t match the collation of
the corresponding partition key, partitionwise joins can yield incorrect
results. For example, rows that would match under the join key collation
might be located in different partitions due to the partitioning
collation. In such cases, a partitionwise join would yield different
results from a non-partitionwise join, so disallow it in such cases.
Reported-by: Tender Wang <tndrwang@gmail.com>
Author: Jian He <jian.universality@gmail.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Junwang Zhao <zhjwpku@gmail.com>
Discussion: https://postgr.es/m/CAHewXNno_HKiQ6PqyLYfuqDtwp7KKHZiH1J7Pqyz0nr+PS2Dwg@mail.gmail.com
Backpatch-through: 12
|
|
If the collation of any grouping column doesn’t match the collation of
the corresponding partition key, partitionwise grouping can yield
incorrect results. For example, rows that would be grouped under the
grouping collation may end up in different partitions under the
partitioning collation. In such cases, full partitionwise grouping
would produce results that differ from those without partitionwise
grouping, so disallowed that.
Partial partitionwise aggregation is still allowed, as the Finalize
step reconciles partition-level aggregates with grouping requirements
across all partitions, ensuring that the final output remains
consistent.
This commit also fixes group_by_has_partkey() by ensuring the
RelabelType node is stripped from grouping expressions when matching
them to partition key expressions to avoid false mismatches.
Bug: #18568
Reported-by: Webbo Han <1105066510@qq.com>
Author: Webbo Han <1105066510@qq.com>
Reviewed-by: Tender Wang <tndrwang@gmail.com>
Reviewed-by: Aleksander Alekseev <aleksander@timescale.com>
Reviewed-by: Jian He <jian.universality@gmail.com>
Discussion: https://postgr.es/m/18568-2a9afb6b9f7e6ed3@postgresql.org
Discussion: https://postgr.es/m/tencent_9D9103CDA420C07768349CC1DFF88465F90A@qq.com
Discussion: https://postgr.es/m/CAHewXNno_HKiQ6PqyLYfuqDtwp7KKHZiH1J7Pqyz0nr+PS2Dwg@mail.gmail.com
Backpatch-through: 12
|
|
Backpatch the part of edee0c621de that applies to a90bdd7a44d, which
was also backpatched. That way, the message is consistent in all
branches.
|
|
When using junction points to emulate symlinks on Windows, one edge case
was not handled correctly by commit c5cb8f3b: if a junction point is
broken (pointing to a non-existent path), we'd report ENOENT. This
doesn't break any known use case, but was noticed while developing a
test suite for these functions and is fixed here for completeness.
Also add translation ERROR_CANT_RESOLVE_FILENAME -> ENOENT, as that is
one of the errors Windows can report for some kinds of broken paths.
Discussion: https://postgr.es/m/CA%2BhUKG%2BajSQ_8eu2AogTncOnZ5me2D-Cn66iN_-wZnRjLN%2Bicg%40mail.gmail.com
(cherry picked from commit 387803d81d6256fcb60b9192bb5b00042442b4e3)
Author: Thomas Munro <tmunro@postgresql.org>
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
|
|
Junction points will be reported with S_ISLNK(x.st_mode), simulating
POSIX lstat(). stat() will follow pseudo-symlinks, like in POSIX (but
only one level before giving up, unlike in POSIX).
This completes a TODO left by commit bed90759fcb.
Tested-by: Andrew Dunstan <andrew@dunslane.net> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGLfOOeyZpm5ByVcAt7x5Pn-%3DxGRNCvgiUPVVzjFLtnY0w%40mail.gmail.com
(cherry picked from commit c5cb8f3b770c043509b61528664bcd805e1777e6)
Author: Thomas Munro <tmunro@postgresql.org>
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
|
|
To support harmonization of Windows and Unix code, teach our unlink()
wrapper that junction points need to be unlinked with rmdir() on
Windows.
Tested-by: Andrew Dunstan <andrew@dunslane.net>
Discussion: https://postgr.es/m/CA%2BhUKGLfOOeyZpm5ByVcAt7x5Pn-%3DxGRNCvgiUPVVzjFLtnY0w%40mail.gmail.com
(cherry picked from commit f357233c9db8be2a015163da8e1ab0630f444340)
Author: Thomas Munro <tmunro@postgresql.org>
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
|
|
Oversight in commit e2f0f8ed. Also add this file to the exclusion lists
in headerscheck and cpluscpluscheck, because Unix systems don't have a
header it includes.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/2760528.1641929756%40sss.pgh.pa.us
(cherry picked from commit af9e6331aeba149c93052c3549140082a85a3cf9)
Author: Thomas Munro <tmunro@postgresql.org>
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
|
|
1. Update our open() wrapper to check for NT's STATUS_DELETE_PENDING
and translate it to Unix-like errors. This is done with
RtlGetLastNtStatus(), which is dynamically loaded from ntdll. A new
file win32ntdll.c centralizes lookup of NT functions, in case we decide
to add more in the future.
2. Remove non-working code that was trying to do something similar for
stat(), and just reuse the open() wrapper code. As a side effect,
stat() also gains resilience against "sharing violation" errors.
3. Since stat() is used very early in process startup, remove the
requirement that the Win32 signal event has been created before
pgwin32_open_handle() is reached. Instead, teach pg_usleep() to fall
back to a non-interruptible sleep if reached before the signal event is
available.
This could be back-patched, but for now it's in master only. The
problem has apparently been with us for a long time and generated only a
few complaints. Proposed patches trigger it more often, which led to
this investigation and fix.
Reviewed-by: Andres Freund <andres@anarazel.de>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJz_pZTF9mckn6XgSv69%2BjGwdgLkxZ6b3NWGLBCVjqUZA%40mail.gmail.com
(cherry picked from commit e2f0f8ed251d02c1eda79e1ca3cb3db2681e7a86)
Author: Thomas Munro <tmunro@postgresql.org>
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
|
|
Three groups of issues needed to be addressed:
load_external_function() and related functions returned PGFunction,
even though not necessarily all callers are looking for a function of
type PGFunction. Since these functions are really just wrappers
around dlsym(), change to return void * just like dlsym().
In dynahash.c, we are using strlcpy() where a function with a
signature like memcpy() is expected. This should be safe, as the new
comment there explains, but the cast needs to be augmented to avoid
the warning.
In PL/Python, methods all need to be cast to PyCFunction, per Python
API, but this now runs afoul of these warnings. (This issue also
exists in core CPython.)
To fix the second and third case, we add a new type pg_funcptr_t that
is defined specifically so that gcc accepts it as a special function
pointer that can be cast to any other function pointer without the
warning.
Also add -Wcast-function-type to the standard warning flags, subject
to configure check.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://www.postgresql.org/message-id/flat/1e97628e-6447-b4fd-e230-d109cec2d584%402ndquadrant.com
(cherry picked from commit de8feb1f3a23465b5737e8a8c160e8ca62f61339)
Author: Peter Eisentraut <peter@eisentraut.org>
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
|
|
The code introduced by bed9075 to enhance the stat() implementation on
Windows for file sizes larger than 4GB fails to properly detect files
pending for deletion with its method based on NtQueryInformationFile()
or GetFileInformationByHandleEx(), as proved by Alexander Lakhin in a
custom TAP test of his own.
The method used in the implementation of open() to sleep and loop when
when failing on ERROR_ACCESS_DENIED (EACCES) is showing much more
stability, so switch to this method. This could still lead to issues if
the permission problem stays around for much longer than the timeout of
1 second used, but that should (hopefully) never happen in
performance-critical paths. Still, there could be a point in increasing
the timeouts for the sake of machines that handle heavy loads.
Note that WIN32's open() now uses microsoft_native_stat() as it should
be similar to stat() when working around issues with concurrent file
deletions.
I have spent some time testing this patch with pgbench in combination
of the SQL functions from genfile.c, as well as running the TAP test
provided on the thread with MSVC builds, and this looks much more
stable than the previous method.
Author: Alexander Lakhin
Reviewed-by: Tom Lane, Michael Paquier, Justin Pryzby
Discussion: https://postgr.es/m/c3427edf-d7c0-ff57-90f6-b5de3bb62709@gmail.com
Backpatch-through: 14
(cherry picked from commit 54fb8c7ddf152629021cab3ac3596354217b7d81)
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
|
|
Hack things so that our idea of "struct stat" is equivalent to Windows'
struct __stat64, allowing it to have a wide enough st_size field.
Instead of relying on native stat(), use GetFileInformationByHandle().
This avoids a number of issues with Microsoft's multiple and rather
slipshod emulations of stat(). We still need to jump through hoops
to deal with ERROR_DELETE_PENDING, though :-(
Pull the relevant support code out of dirmod.c and put it into
its own file, win32stat.c.
Still TODO: do we need to do something different with lstat(),
rather than treating it identically to stat()?
Juan José Santamaría Flecha, reviewed by Emil Iggland;
based on prior work by Michael Paquier, Sergey Zubkovsky, and others
Discussion: https://postgr.es/m/1803D792815FC24D871C00D17AE95905CF5099@g01jpexmbkw24
Discussion: https://postgr.es/m/15858-9572469fd3b73263@postgresql.org
(cherry picked from commit bed90759fcbcd72d4d06969eebab81e47326f9a2)
Author: Alexandra Wang <alexandra.wang.oss@gmail.com>
|
|
Supply a new memory manager for RuntimeDyld, to avoid crashes in
generated code caused by memory placement that can overflow a 32 bit
data type. This is a drop-in replacement for the
llvm::SectionMemoryManager class in the LLVM library, with Michael
Smith's proposed fix from
https://www.github.com/llvm/llvm-project/pull/71968.
We hereby slurp it into our own source tree, after moving into a new
namespace llvm::backport and making some minor adjustments so that it
can be compiled with older LLVM versions as far back as 12. It's harder
to make it work on even older LLVM versions, but it doesn't seem likely
that people are really using them so that is not investigated for now.
The problem could also be addressed by switching to JITLink instead of
RuntimeDyld, and that is the LLVM project's recommended solution as
the latter is about to be deprecated. We'll have to do that soon enough
anyway, and then when the LLVM version support window advances far
enough in a few years we'll be able to delete this code. Unfortunately
that wouldn't be enough for PostgreSQL today: in most relevant versions
of LLVM, JITLink is missing or incomplete.
Several other projects have already back-ported this fix into their fork
of LLVM, which is a vote of confidence despite the lack of commit into
LLVM as of today. We don't have our own copy of LLVM so we can't do
exactly what they've done; instead we have a copy of the whole patched
class so we can pass an instance of it to RuntimeDyld.
The LLVM project hasn't chosen to commit the fix yet, and even if it
did, it wouldn't be back-ported into the releases of LLVM that most of
our users care about, so there is not much point in waiting any longer
for that. If they make further changes and commit it to LLVM 19 or 20,
we'll still need this for older versions, but we may want to
resynchronize our copy and update some comments.
The changes that we've had to make to our copy can be seen by diffing
our SectionMemoryManager.{h,cpp} files against the ones in the tree of
the pull request. Per the LLVM project's license requirements, a copy
is in SectionMemoryManager.LICENSE.
This should fix the spate of crash reports we've been receiving lately
from users on large memory ARM systems.
Back-patch to all supported releases.
Co-authored-by: Thomas Munro <thomas.munro@gmail.com>
Co-authored-by: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se> (license aspects)
Reported-by: Anthonin Bonnefoy <anthonin.bonnefoy@datadoghq.com>
Discussion: https://postgr.es/m/CAO6_Xqr63qj%3DSx7HY6ZiiQ6R_JbX%2B-p6sTPwDYwTWZjUmjsYBg%40mail.gmail.com
|
|
Buildfarm member mamba fails to deduce that the function never uses this
variable without initializing it. Back-patch to v12, like commit
b412f402d1e020c5dac94f3bf4a005db69519b99.
|
|
Commit a07e03fd8fa7daf4d1356f7cb501ffe784ea6257 enlarged the work done
here under the pg_class heap buffer lock. Two preexisting actions are
best done before holding that lock. Both RelationGetNumberOfBlocks()
and visibilitymap_count() do I/O, and the latter might exclusive-lock a
visibility map buffer. Moving these reduces contention and risk of
undetected LWLock deadlock. Back-patch to v12, like that commit.
Discussion: https://postgr.es/m/20241031200139.b4@rfd.leadboat.com
|
|
This reverts commit 95c5acb3fc261067ab65ddc0b2dca8e162f09442 (v17) and
counterparts in each other non-master branch. If released, that commit
would have caused a worst-in-years minor release regression, via
undetected LWLock self-deadlock. This commit and its self-deadlock fix
warrant more bake time in the master branch.
Reported by Alexander Lakhin.
Discussion: https://postgr.es/m/10ec0bc3-5933-1189-6bb8-5dec4114558e@gmail.com
|
|
This reverts commit bfd5c6e279c8e1702eea882439dc7ebdf4d4b3a5 (v17) and
counterparts in each other non-master branch. This unblocks reverting a
commit on which it depends.
Discussion: https://postgr.es/m/10ec0bc3-5933-1189-6bb8-5dec4114558e@gmail.com
|
|
Commit a07e03fd8fa7daf4d1356f7cb501ffe784ea6257 changed inplace updates
to wait for heap_update() commands like GRANT TABLE and GRANT DATABASE.
By keeping the pin during that wait, a sequence of autovacuum workers
and an uncommitted GRANT starved one foreground LockBufferForCleanup()
for six minutes, on buildfarm member sarus. Prevent, at the cost of a
bit of complexity. Back-patch to v12, like the earlier commit. That
commit and heap_inplace_lock() have not yet appeared in any release.
Discussion: https://postgr.es/m/20241026184936.ae.nmisch@google.com
|
|
Historical corrections for Mexico, Mongolia, and Portugal.
Notably, Asia/Choibalsan is now an alias for Asia/Ulaanbaatar
rather than being a separate zone, mainly because the differences
between those zones were found to be based on untrustworthy data.
|
|
There are two functions that can be used in event triggers to get more
details about a rewrite happening on a relation. Both had a limited
documentation:
- pg_event_trigger_table_rewrite_reason() and
pg_event_trigger_table_rewrite_oid() were not mentioned in the main
event trigger section in the paragraph dedicated to the event
table_rewrite.
- pg_event_trigger_table_rewrite_reason() returns an integer which is a
bitmap of the reasons why a rewrite happens. There was no explanation
about the meaning of these values, forcing the reader to look at the
code to find out that these are defined in event_trigger.h.
While on it, let's add a comment in event_trigger.h where the
AT_REWRITE_* are defined, telling to update the documentation when
these values are changed.
Backpatch down to 13 as a consequence of 1ad23335f36b, where this area
of the documentation has been heavily reworked.
Author: Greg Sabino Mullane
Discussion: https://postgr.es/m/CAKAnmmL+Z6j-C8dAx1tVrnBmZJu+BSoc68WSg3sR+CVNjBCqbw@mail.gmail.com
Backpatch-through: 13
|
|
A buffer lock won't stop a reader having already checked tuple
visibility. If a vac_update_datfrozenid() and then a crash happened
during inplace update of a relfrozenxid value, datfrozenxid could
overtake relfrozenxid. That could lead to "could not access status of
transaction" errors. Back-patch to v12 (all supported versions). In
v14 and earlier, this also back-patches the assertion removal from
commit 7fcf2faf9c7dd473208fd6d5565f88d7f733782b.
Discussion: https://postgr.es/m/20240620012908.92.nmisch@google.com
|
|
The inplace update survives ROLLBACK. The inval didn't, so another
backend's DDL could then update the row without incorporating the
inplace update. In the test this fixes, a mix of CREATE INDEX and ALTER
TABLE resulted in a table with an index, yet relhasindex=f. That is a
source of index corruption. Back-patch to v12 (all supported versions).
The back branch versions don't change WAL, because those branches just
added end-of-recovery SIResetAll(). All branches change the ABI of
extern function PrepareToInvalidateCacheTuple(). No PGXN extension
calls that, and there's no apparent use case in extensions.
Reviewed by Nitin Motiani and (in earlier versions) Andres Freund.
Discussion: https://postgr.es/m/20240523000548.58.nmisch@google.com
|
|
An inplace update's invalidation messages are part of its transaction's
commit record. However, the update survives even if its transaction
aborts or we stop recovery before replaying its transaction commit.
After recovery, a backend that started in recovery could update the row
without incorporating the inplace update. That could result in a table
with an index, yet relhasindex=f. That is a source of index corruption.
This bulk invalidation avoids the functional consequences. A future
change can fix the !RecoveryInProgress() scenario without changing the
WAL format. Back-patch to v17 - v12 (all supported versions). v18 will
instead add invalidations to WAL.
Discussion: https://postgr.es/m/20240618152349.7f.nmisch@google.com
|
|
Stop computing a never-used value. This removes the read; the read had
no functional implications. Back-patch to v12, like commit
a07e03fd8fa7daf4d1356f7cb501ffe784ea6257.
Reported by Alexander Lakhin.
Discussion: https://postgr.es/m/6c92f59b-f5bc-e58c-9bdd-d1f21c17c786@gmail.com
|
|
Relations opened by the executor are only closed once in
ExecCloseRangeTableRelations(), so the word "again" in the comment
for ExecGetRangeTableRelation() is misleading and unnecessary.
Discussion: https://postgr.es/m/CA+HiwqHnw-zR+u060i3jp4ky5UR0CjByRFQz50oZ05de7wUg=Q@mail.gmail.com
Backpatch-through: 12
|
|
It was possible for the code to read out-of-bound data from the
"day_tab" table with some crafted input data. Let's treat these as
invalid input as the month number is incorrect.
A test is added to test this case with a check on the errno returned by
the decoding routine. A test close to the new one added in this commit
was testing for a failure, but did not look at the errno generated, so
let's use this commit to also change it, adding a check on the errno
returned by DecodeDateTime().
Like the other test scripts, dt_test should likely be expanded to
include more checks based on the errnos generated in these code paths.
This is left as future work.
This issue exists since 2e6f97560a83, so backpatch all the way down.
Reported-by: Pavel Nekrasov
Author: Bruce Momjian, Pavel Nekrasov
Discussion: https://postgr.es/m/18614-6bbe00117352309e@postgresql.org
Backpatch-through: 12
|
|
... to fix bugs when the referenced table is partitioned.
The catalog representation we chose for foreign keys connecting
partitioned tables (in commit f56f8f8da6af) is inconvenient, in the
sense that a standalone table has a different way to represent the
constraint when referencing a partitioned table, than when the same
table becomes a partition (and vice versa). Because of this, we need to
create additional catalog rows on detach (pg_constraint and pg_trigger),
and remove them on attach. We were doing some of those things, but not
all of them, leading to missing catalog rows in certain cases.
The worst problem seems to be that we are missing action triggers after
detaching a partition, which means that you could update/delete rows
from the referenced partitioned table that still had referencing rows on
that table, the server failing to throw the required errors.
!!!
Note that this means existing databases with FKs that reference
partitioned tables might have rows that break relational integrity, on
tables that were once partitions on the referencing side of the FK.
Another possible problem is that trying to reattach a table
that had been detached would fail indicating that internal triggers
cannot be found, which from the user's point of view is nonsensical.
In branches 15 and above, we fix this by creating a new helper function
addFkConstraint() which is in charge of creating a standalone
pg_constraint row, and repurposing addFkRecurseReferencing() and
addFkRecurseReferenced() so that they're only the recursive routine for
each side of the FK, and they call addFkConstraint() to create
pg_constraint at each partitioning level and add the necessary triggers.
These new routines can be used during partition creation, partition
attach and detach, and foreign key creation. This reduces redundant
code and simplifies the flow.
In branches 14 and 13, we have a much simpler fix that consists on
simply removing the constraint on detach. The reason is that those
branches are missing commit f4566345cf40, which reworked the way this
works in a way that we didn't consider back-patchable at the time.
We opted to leave branch 12 alone, because it's different from branch 13
enough that the fix doesn't apply; and because it is going in EOL mode
very soon, patching it now might be worse since there's no way to undo
the damage if it goes wrong.
Existing databases might need to be repaired.
In the future we might want to rethink the catalog representation to
avoid this problem, but for now the code seems to do what's required to
make the constraints operate correctly.
Co-authored-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Co-authored-by: Tender Wang <tndrwang@gmail.com>
Co-authored-by: Alvaro Herrera <alvherre@alvh.no-ip.org>
Reported-by: Guillaume Lelarge <guillaume@lelarge.info>
Reported-by: Jehan-Guillaume de Rorthais <jgdr@dalibo.com>
Reported-by: Thomas Baehler (SBB CFF FFS) <thomas.baehler2@sbb.ch>
Discussion: https://postgr.es/m/20230420144344.40744130@karst
Discussion: https://postgr.es/m/20230705233028.2f554f73@karst
Discussion: https://postgr.es/m/GVAP278MB02787E7134FD691861635A8BC9032@GVAP278MB0278.CHEP278.PROD.OUTLOOK.COM
Discussion: https://postgr.es/m/18541-628a61bc267cd2d3@postgresql.org
|
|
If the query is rewritten into a NOTIFY command by a DO INSTEAD
rule, we'd get an assertion failure, or in non-assert builds
issue a rather confusing error message. Improve that.
Also fix a longstanding grammar mistake in a nearby error message.
Per bug #18664 from Alexander Lakhin. Back-patch to all supported
branches.
Tender Wang and Tom Lane
Discussion: https://postgr.es/m/18664-ffd0ebc2386598df@postgresql.org
|
|
The finished transaction list can contain XIDs that are older than the
serializable global xmin. It's a short-lived state;
ClearOldPredicateLocks() removes any such transactions from the list,
and it's called whenever the global xmin advances. But if another
backend calls SummarizeOldestCommittedSxact() in that window, it will
call SerialAdd() on an XID that's older than the global xmin, or if
there are no more transactions running, when global xmin is
invalid. That trips the assertion in SerialAdd().
Fixes bug #18658 reported by Andrew Bille. Thanks to Alexander Lakhin
for analysis. Backpatch to all versions.
Discussion: https://www.postgresql.org/message-id/18658-7dab125ec688c70b%40postgresql.org
|
|
After repartitioning the inner side of a hash join that would have
exceeded the allowed size, we check if all the tuples from a parent
partition moved to one child partition. That is evidence that it
contains duplicate keys and later attempts to repartition will also
fail, so we should give up trying to limit memory (for lack of a better
fallback strategy).
A thinko prevented the check from working correctly in partition 0 (the
one that is partially loaded into memory already). After
repartitioning, we should check for extreme skew if the *parent*
partition's space_exhausted flag was set, not the child partition's.
The consequence was repeated futile repartitioning until per-partition
data exceeded various limits including "ERROR: invalid DSA memory alloc
request size 1811939328", OS allocation failure, or temporary disk space
errors. (We could also do something about some of those symptoms, but
that's material for separate patches.)
This problem only became likely when PostgreSQL 16 introduced support
for Parallel Hash Right/Full Join, allowing NULL keys into the hash
table. Repartitioning always leaves NULL in partition 0, no matter how
many times you do it, because the hash value is all zero bits. That's
unlikely for other hashed values, but they might still have caused
wasted extra effort before giving up.
Back-patch to all supported releases.
Reported-by: Craig Milhiser <craig@milhiser.com>
Reviewed-by: Andrei Lepikhov <lepihov@gmail.com>
Discussion: https://postgr.es/m/CA%2BwnhO1OfgXbmXgC4fv_uu%3DOxcDQuHvfoQ4k0DFeB0Qqd-X-rQ%40mail.gmail.com
|
|
Commit 2dc1deaea turns out to have been still a brick shy of a load,
because CALL statements executing within a plpgsql exception block
could still pass the wrong snapshot to stable functions within the
CALL's argument list. That happened because standard_ProcessUtility
forces isAtomicContext to true if IsTransactionBlock is true, which
it always will be inside a subtransaction. Then ExecuteCallStmt
would think it does not need to push a new snapshot --- but
_SPI_execute_plan didn't do so either, since it thought it was in
nonatomic mode.
The best fix for this seems to be for _SPI_execute_plan to operate
in atomic execution mode if IsSubTransaction() is true, even when the
SPI context as a whole is non-atomic. This makes _SPI_execute_plan
have the same rules about when non-atomic execution is allowed as
_SPI_commit/_SPI_rollback have about when COMMIT/ROLLBACK are allowed,
which seems appropriately symmetric. (If anyone ever tries to allow
COMMIT/ROLLBACK inside a subtransaction, this would all need to be
rethought ... but I'm unconvinced that such a thing could be logically
consistent at all.)
For further consistency, also check IsSubTransaction() in
SPI_inside_nonatomic_context. That does not matter for its
one present-day caller StartTransaction, which can't be reached
inside a subtransaction. But if any other callers ever arise,
they'd presumably want this definition.
Per bug #18656 from Alexander Alehin. Back-patch to all
supported branches, like previous fixes in this area.
Discussion: https://postgr.es/m/18656-cade1780866ef66c@postgresql.org
|
|
Commit a4ccc1cef introduced the Generation Context and modified the
logical decoding process to use a Generation Context with a fixed
block size of 8MB for storing tuple data decoded during logical
decoding (i.e., rb->tup_context). Several reports have indicated that
the logical decoding process can be terminated due to
out-of-memory (OOM) situations caused by excessive memory usage in
rb->tup_context.
This issue can occur when decoding a workload involving several
concurrent transactions, including a long-running transaction that
modifies tuples. By design, the Generation Context does not free a
memory block until all chunks within that block are
released. Consequently, if tuples modified by the long-running
transaction are stored across multiple memory blocks, these blocks
remain allocated until the long-running transaction completes, leading
to substantial memory fragmentation. The memory usage during logical
decoding, tracked by rb->size, does not account for memory
fragmentation, resulting in potentially much higher memory consumption
than the value of the logical_decoding_work_mem parameter.
Various improvement strategies were discussed in the relevant
thread. This change reduces the block size of the Generation Context
used in rb->tup_context from 8MB to 8kB. This modification
significantly decreases the likelihood of substantial memory
fragmentation occurring and is relatively straightforward to
backport. Performance testing across multiple platforms has confirmed
that this change will not introduce any performance degradation that
would impact actual operation.
Backport to all supported branches.
Reported-by: Alex Richman, Michael Guissine, Avi Weinberg
Reviewed-by: Amit Kapila, Fujii Masao, David Rowley
Tested-by: Hayato Kuroda, Shlok Kyal
Discussion: https://postgr.es/m/CAD21AoBTY1LATZUmvSXEssvq07qDZufV4AF-OHh9VD2pC0VY2A%40mail.gmail.com
Backpatch-through: 12
|
