| Age | Commit message (Collapse) | Author |
|---|
|
Robert Foggia of Trustwave reported that read_tablespace_map()
fails to prevent an overrun of its on-stack input buffer.
Since the tablespace map file is presumed trustworthy, this does
not seem like an interesting security vulnerability, but still
we should fix it just in the name of robustness.
While here, document that pg_basebackup's --tablespace-mapping option
doesn't work with tar-format output, because it doesn't. To make it
work, we'd have to modify the tablespace_map file within the tarball
sent by the server, which might be possible but I'm not volunteering.
(Less-painful solutions would require changing the basebackup protocol
so that the source server could adjust the map. That's not very
appetizing either.)
|
|
psql's editing commands decide whether the user has edited the file
by checking for change of modification timestamp. This is probably
fine for a pre-existing file, but with a temporary file that is
created within the command, it's possible for a fast typist to
save-and-exit in less than the one-second granularity of stat(2)
timestamps. On Windows FAT filesystems the granularity is even
worse, 2 seconds, making the race a bit easier to hit.
To fix, try to set the temp file's mod time to be two seconds ago.
It's unlikely this would fail, but then again the race condition
itself is unlikely, so just ignore any error.
Also, we might as well check the file size as well as its mod time.
While this is a difficult bug to hit, it still seems worth
back-patching, to ensure that users' edits aren't lost.
Laurenz Albe, per gripe from Jacob Champion; based on fix suggestions
from Jacob and myself
Discussion: https://postgr.es/m/0ba3f2a658bac6546d9934ab6ba63a805d46a49b.camel@cybertec.at
|
|
Commit 92785dac2 copied some logic related to advancement of inStart
from pqParseInput3 into getRowDescriptions and getAnotherTuple,
because it wanted to allow user-defined row processor callbacks to
potentially longjmp out of the library, and inStart would have to be
updated before that happened to avoid an infinite loop. We later
decided that that API was impossibly fragile and reverted it, but
we didn't undo all of the related code changes, and this bit of
messiness survived. Undo it now so that there's just one place in
pqParseInput3's processing where inStart is advanced; this will
simplify addition of better tracing support.
getParamDescriptions had grown similar processing somewhere along
the way (not in 92785dac2; I didn't track down just when), but it's
actually buggy because its handling of corrupt-message cases seems to
have been copied from the v2 logic where we lacked a known message
length. The cases where we "goto not_enough_data" should not simply
return EOF, because then we won't consume the message, potentially
creating an infinite loop. That situation now represents a
definitively corrupt message, and we should report it as such.
Although no field reports of getParamDescriptions getting stuck in
a loop have been seen, it seems appropriate to back-patch that fix.
I chose to back-patch all of this to keep the logic looking more alike
in supported branches.
Discussion: https://postgr.es/m/2217283.1615411989@sss.pgh.pa.us
|
|
This is a follow-on patch to 92c12e46d5. In that patch, we renamed
"altitude" to "elevation" in the docs, based on these details:
https://mapscaping.com/blogs/geo-candy/what-is-the-difference-between-elevation-relief-and-altitude
This renames the tutorial SQL files to match the documentation.
Reported-by: max1@inbox.ru
Discussion: https://postgr.es/m/161512392887.1046.3137472627109459518@wrigleys.postgresql.org
Backpatch-through: 9.6
|
|
Commit 866e24d47db1 added an assert that HEAP_XMAX_LOCK_ONLY and
HEAP_KEYS_UPDATED cannot appear together, on the faulty assumption that
the latter necessarily referred to an update and not a tuple lock; but
that's wrong, because SELECT FOR UPDATE can use precisely that
combination, as evidenced by the amcheck test case added here.
Remove the Assert(), and also patch amcheck's verify_heapam.c to not
complain if the combination is found. Also, out of overabundance of
caution, update (across all branches) README.tuplock to be more explicit
about this.
Author: Julien Rouhaud <rjuju123@gmail.com>
Reviewed-by: Mahendra Singh Thalor <mahi6run@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Discussion: https://postgr.es/m/20210124061758.GA11756@nol
|
|
While poking at the regex code, I happened to notice that the bug
squashed in commit afcc8772e had a sibling: next() failed to return
a specific value associated with the '}' token for a "\{m,n\}"
quantifier when parsing in basic RE mode. Again, this could result
in treating the quantifier as non-greedy, which it never should be in
basic mode. For that to happen, the last character before "\}" that
sets "nextvalue" would have to set it to zero, or it'd have to have
accidentally been zero from the start. The failure can be provoked
repeatably with, for example, a bound ending in digit "0".
Like the previous patch, back-patch all the way.
|
|
Back-patch a tiny bit of commit fbb2e9a0 into 9.6 and 10, to silence an
uninitialized variable warning from GCC 10.2. Seen on buildfarm member
handfish, and my own development workflow where I like to use -Werror.
Discussion: https://postgr.es/m/CA%2BhUKGJRcwvK86Uf5t-FrTekZjqHtpv3u%3D3MuBg8Zw8R933Mqg%40mail.gmail.com
|
|
FreeBSD 13 gained O_DSYNC, which would normally cause wal_sync_method to
choose open_datasync as its default value. That may not be a good
choice for all systems, and performs worse than fdatasync in some
scenarios. Let's preserve the existing default behavior for now.
Like commit 576477e73c4, which did the same for Linux, back-patch to all
supported releases.
Discussion: https://postgr.es/m/CA%2BhUKGLsAMXBQrCxCXoW-JsUYmdOL8ALYvaX%3DCrHqWxm-nWbGA%40mail.gmail.com
|
|
While cleaning up after a parallel query or parallel index creation that
created temporary files, we could be interrupted by a statement timeout.
The error handling path would then fail to clean up the files when it
ran dsm_detach() again, because the callback was already popped off the
list. Prevent this hazard by holding interrupts while the cleanup code
runs.
Thanks to Heikki Linnakangas for this suggestion, and also to Kyotaro
Horiguchi, Masahiko Sawada, Justin Pryzby and Tom Lane for discussion of
this and earlier ideas on how to fix the problem.
Back-patch to all supported releases.
Reported-by: Justin Pryzby <pryzby@telsasoft.com>
Discussion: https://postgr.es/m/20191212180506.GR2082@telsasoft.com
|
|
Modern gcc and clang compilers offer alignment sanitizers, which help to detect
pointer misalignment. However, our codebase already contains x86-specific
crc32 computation code, which uses unalignment access. Thankfully, those
compilers also support the attribute, which disables alignment sanitizers at
the function level. This commit adds pg_attribute_no_sanitize_alignment(),
which wraps this attribute, and applies it to pg_comp_crc32c_sse42() function.
Back-patch of commits 993bdb9f9 and ad2ad698a, to enable doing
alignment testing in all supported branches.
Discussion: https://postgr.es/m/CAPpHfdsne3%3DT%3DfMNU45PtxdhSL_J2PjLTeS8rwKnJzUR4YNd4w%40mail.gmail.com
Discussion: https://postgr.es/m/475514.1612745257%40sss.pgh.pa.us
Author: Alexander Korotkov, revised by Tom Lane
Reviewed-by: Tom Lane
|
|
Given a regex pattern with a very long fixed prefix (approaching 500
characters), the result of pow(FIXED_CHAR_SEL, fixed_prefix_len) can
underflow to zero. Typically the preceding selectivity calculation
would have underflowed as well, so that we compute 0/0 and get NaN.
In released branches this leads to an assertion failure later on.
That doesn't happen in HEAD, for reasons I've not explored yet,
but it's surely still a bug.
To fix, just skip the division when the pow() result is zero, so
that we'll (most likely) return a zero selectivity estimate. In
the edge cases where "sel" didn't yet underflow, perhaps this
isn't desirable, but I'm not sure that the case is worth spending
a lot of effort on. The results of regex_selectivity_sub() are
barely worth the electrons they're written on anyway :-(
Per report from Alexander Lakhin. Back-patch to all supported versions.
Discussion: https://postgr.es/m/6de0a0c3-ada9-cd0c-3e4e-2fa9964b41e3@gmail.com
|
|
|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: c1022f89a3531073349e8954e4f4fae64fe34552
|
|
This reverts commit ed290896335414c6c069b9ccae1f3dcdd2fac6ba and
equivalent back-branch commits. The issue is subtler than I thought,
and it's far from new, so just before a release deadline is no time
to be fooling with it. We'll consider what to do at a bit more
leisure.
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
|
|
rewriteRuleAction() neglected this step, although it was careful to
propagate other similar flags such as hasSubLinks or hasRowSecurity.
Omitting to transfer hasRecursive is just cosmetic at the moment,
but omitting hasModifyingCTE is a live bug, since the executor
certainly looks at that.
The proposed test case only fails back to v10, but since the executor
examines hasModifyingCTE in 9.x as well, I suspect that a test case
could be devised that fails in older branches. Given the nearness
of the release deadline, though, I'm not going to spend time looking
for a better test.
Report and patch by Greg Nancarrow, cosmetic changes by me
Discussion: https://postgr.es/m/CAJcOf-fAdj=nDKMsRhQzndm-O13NY4dL6xGcEvdX5Xvbbi0V7g@mail.gmail.com
|
|
Generally, members of inheritance trees must be plain tables (or,
in more recent versions, foreign tables). ALTER TABLE INHERIT
rejects creating an inheritance relationship that has a view at
either end. When DefineQueryRewrite attempts to convert a relation
to a view, it already had checks prohibiting doing so for partitioning
parents or children as well as traditional-inheritance parents ...
but it neglected to check that a traditional-inheritance child wasn't
being converted. Since the planner assumes that any inheritance
child is a table, this led to making plans that tried to do a physical
scan on a view, causing failures (or even crashes, in recent versions).
One could imagine trying to support such a case by expanding the view
normally, but since the rewriter runs before the planner does
inheritance expansion, it would take some very fundamental refactoring
to make that possible. There are probably a lot of other parts of the
system that don't cope well with such a situation, too. For now,
just forbid it.
Per bug #16856 from Yang Lin. Back-patch to all supported branches.
(In versions before v10, this includes back-patching the portion of
commit 501ed02cf that added has_superclass(). Perhaps the lack of
that infrastructure partially explains the missing check.)
Discussion: https://postgr.es/m/16856-0363e05c6e1612fd@postgresql.org
|
|
If a multi-byte character is escaped with a backslash in TEXT mode input,
and the encoding is one of the client-only encodings where the bytes after
the first one can have an ASCII byte "embedded" in the char, we didn't
skip the character correctly. After a backslash, we only skipped the first
byte of the next character, so if it was a multi-byte character, we would
try to process its second byte as if it was a separate character. If it
was one of the characters with special meaning, like '\n', '\r', or
another '\\', that would cause trouble.
One such exmple is the byte sequence '\x5ca45c2e666f6f' in Big5 encoding.
That's supposed to be [backslash][two-byte character][.][f][o][o], but
because the second byte of the two-byte character is 0x5c, we incorrectly
treat it as another backslash. And because the next character is a dot, we
parse it as end-of-copy marker, and throw an "end-of-copy marker corrupt"
error.
Backpatch to all supported versions.
Reviewed-by: John Naylor, Kyotaro Horiguchi
Discussion: https://www.postgresql.org/message-id/a897f84f-8dca-8798-3139-07da5bb38728%40iki.fi
|
|
In a cluster having used CREATE INDEX CONCURRENTLY while having enabled
prepared transactions, queries that use the resulting index can silently
fail to find rows. Fix this for future CREATE INDEX CONCURRENTLY by
making it wait for prepared transactions like it waits for ordinary
transactions. This expands the VirtualTransactionId structure domain to
admit prepared transactions. It may be necessary to reindex to recover
from past occurrences. Back-patch to 9.5 (all supported versions).
Andrey Borodin, reviewed (in earlier versions) by Tom Lane and Michael
Paquier.
Discussion: https://postgr.es/m/2E712143-97F7-4890-B470-4A35142ABC82@yandex-team.ru
|
|
Per buildfarm and local experimentation, bleeding-edge gcc isn't
convinced that the MemSet in reorder_function_arguments() is safe.
Shut it up by adding an explicit check that pronargs isn't negative,
and by changing MemSet to memset. (It appears that either change is
enough to quiet the warning at -O2, but let's do both to be sure.)
|
|
We had "short *mdy" in the extern declarations, but "short mdy[3]"
in the actual function definitions. Per C99 these are equivalent,
but recent versions of gcc have started to issue warnings about
the inconsistency. Clean it up before the warnings get any more
widespread.
Back-patch, in case anyone wants to build older PG versions with
bleeding-edge compilers.
Discussion: https://postgr.es/m/2401575.1611764534@sss.pgh.pa.us
|
|
doConnect() never returns connections in state CONNECTION_BAD, so
checking for that is pointless. Remove the code that does.
This code has been dead since ba708ea3dc84, 20 years ago.
Discussion: https://postgr.es/m/20210126195224.GA20361@alvherre.pgsql
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
|
|
When reporting connection errors, we might show a database name in the
message that's not the one we actually tried to connect to, if the
database was taken from libpq defaults instead of from user parameters.
Fix such error messages to use PQdb(), which reports the correct name.
(But, per commit 2930c05634bc, make sure not to try to print NULL.)
Apply to branches 9.5 through 13. Branch master has already been
changed differently by commit 58cd8dca3de0.
Reported-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/CA+TgmobssJ6rS22dspWnu-oDxXevGmhMD8VcRBjmj-b9UDqRjw@mail.gmail.com
|
|
The loops to identify word boundaries could access past the end of
the input string. Likely that would never result in an actual
crash, but it makes valgrind unhappy.
The logic to try different numbers of words didn't work when the
input has two words but we only have a match to the first, eg
"\h with select". (We must "continue" the pass loop, not "break".)
The logic to compute nl_count was bizarrely managed, and in at
least two code paths could end up calling PageOutput with
nl_count = 0, resulting in failing to paginate output that should
have been fed to the pager. Also, in v12 and up, the nl_count
calculation hadn't been updated to account for the addition of a URL.
The PQExpBuffer holding the command syntax details wasn't freed,
resulting in a session-lifespan memory leak.
While here, improve some comments, choose a more descriptive name
for a variable, fix inconsistent datatype choice for another variable.
Per bug #16837 from Alexander Lakhin. This code is very old,
so back-patch to all supported branches.
Kyotaro Horiguchi and Tom Lane
Discussion: https://postgr.es/m/16837-479bcd56040c71b3@postgresql.org
|
|
I chanced to notice that this dumped core due to a faulty Assert.
To add insult to injury, the output has been misformatted since v11.
Obviously we need some regression testing here.
Discussion: https://postgr.es/m/d1cc628c-3953-4209-957b-29427acc38c8@www.fastmail.com
|
|
Both heapgettup() and heapgettup_pagemode() incorrectly set the first page
to scan in a backward scan in which the number of pages to scan was
specified by heap_setscanlimits(). The code incorrectly started the scan
at the end of the relation when startBlk was 0, or otherwise at
startBlk - 1, neither of which is correct when only scanning a subset of
pages.
The fix here checks if heap_setscanlimits() has changed the number of
pages to scan and if so we set the first page to scan as the final page in
the specified range during backward scans.
Proper adjustment of this code was forgotten when heap_setscanlimits() was
added in 7516f5259 back in 9.5. However, practice, nowhere in core code
performs backward scans after having used heap_setscanlimits(), yet, it is
possible an extension uses the heap functions in this way, hence
backpatch.
An upcoming patch does use heap_setscanlimits() with backward scans, so
this must be fixed before that can go in.
Author: David Rowley
Discussion: https://postgr.es/m/CAApHDvpGc9h0_oVD2CtgBcxCS1N-qDYZSeBRnUh+0CWJA9cMaA@mail.gmail.com
Backpatch-through: 9.5, all supported versions
|
|
DST law changes in Russia (Volgograd zone) and South Sudan.
Historical corrections for Australia, Bahamas, Belize, Bermuda,
Ghana, Israel, Kenya, Nigeria, Palestine, Seychelles, and Vanuatu.
Notably, the Australia/Currie zone has been corrected to the point
where it is identical to Australia/Hobart.
|
|
It tested the installed binaries. This fixes 9.6 and 9.5 to follow
later versions and "make -C src/test/isolation check" in this respect.
|
|
It emerges that in some phases of the moon (perhaps to do with
directory entry order?), xcrun will report that the SDK path is
/Library/Developer/CommandLineTools/SDKs/MacOSX.sdk
which is normally a symlink to a version-numbered sibling directory.
Our heuristic to skip non-version-numbered pathnames was rejecting
that, which is the wrong thing to do. We'd still like to end up
with a version-numbered PG_SYSROOT value, but we can have that by
dereferencing the symlink.
Like the previous fix, back-patch to all supported versions.
Discussion: https://postgr.es/m/522433.1611089678@sss.pgh.pa.us
|
|
Specifying duplicated objects in this command would lead to unique
constraint violations in pg_default_acl or "tuple already updated by
self" errors. Similarly to GRANT/REVOKE, increment the command ID after
each subcommand processing to allow this case to work transparently.
A regression test is added by tweaking one of the existing queries of
privileges.sql to stress this case.
Reported-by: Andrus
Author: Michael Paquier
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/ae2a7dc1-9d71-8cba-3bb9-e4cb7eb1f44e@hot.ee
Backpatch-through: 9.5
|
|
Somebody extended search_plan_tree() to treat MergeAppend exactly
like Append, which is 100% wrong, because unlike Append we can't
assume that only one input node is actively returning tuples.
Hence a cursor using a MergeAppend across a UNION ALL or inheritance
tree could falsely match a WHERE CURRENT OF query at a row that
isn't actually the cursor's current output row, but coincidentally
has the same TID (in a different table) as the current output row.
Delete the faulty code; this means that such a case will now return
an error like 'cursor "foo" is not a simply updatable scan of table
"bar"', instead of silently misbehaving. Users should not find that
surprising though, as the same cursor query could have failed that way
already depending on the chosen plan. (It would fail like that if the
sort were done with an explicit Sort node instead of MergeAppend.)
Expand the clearly-inadequate commentary to be more explicit about
what this code is doing, in hopes of forestalling future mistakes.
It's been like this for awhile, so back-patch to all supported
branches.
Discussion: https://postgr.es/m/482865.1611075182@sss.pgh.pa.us
|
|
execCurrent.c's search_plan_tree() assumed that ForeignScanStates
and CustomScanStates necessarily have a valid ss_currentRelation.
This is demonstrably untrue for postgres_fdw's remote join and
remote aggregation plans, and non-leaf custom scans might not have
an identifiable scan relation either. Avoid crashing by ignoring
such nodes when the field is null.
This solution will lead to errors like 'cursor "foo" is not a
simply updatable scan of table "bar"' in cases where maybe we
could have allowed WHERE CURRENT OF to work. That's not an issue
for postgres_fdw's usages, since joins or aggregations would render
WHERE CURRENT OF invalid anyway. But an otherwise-transparent
upper level custom scan node might find this annoying. When and if
someone cares to expend work on such a scenario, we could invent a
custom-scan-provider callback to determine what's safe.
Report and patch by David Geier, commentary by me. It's been like
this for awhile, so back-patch to all supported branches.
Discussion: https://postgr.es/m/0253344d-9bdd-11c4-7f0d-d88c02cd7991@swarm64.com
|
|
The context is an object that no longer bears some aclitem that it bore
initially. (A user issued REVOKE or GRANT statements upon the object.)
pg_dump is forming SQL to reproduce the object ACL. Since initdb
creates no ACL bearing GRANT OPTION, reaching this bug requires an
extension where the creation script establishes such an ACL. No PGXN
extension does that. If an installation did reach the bug, pg_dump
would have omitted a semicolon, causing a REVOKE and the next SQL
statement to fail. Separately, since the affected code exists to
eliminate an entire aclitem, it wants plain REVOKE, not REVOKE GRANT
OPTION FOR. Back-patch to 9.6, where commit
23f34fa4ba358671adab16773e79c17c92cbc870 first appeared.
Discussion: https://postgr.es/m/20210109102423.GA160022@rfd.leadboat.com
|
|
Every core SLRU wraps around. With the exception of pg_notify, the wrap
point can fall in the middle of a page. Account for this in the
PagePrecedes callback specification and in SimpleLruTruncate()'s use of
said callback. Update each callback implementation to fit the new
specification. This changes SerialPagePrecedesLogically() from the
style of asyncQueuePagePrecedes() to the style of CLOGPagePrecedes().
(Whereas pg_clog and pg_serial share a key space, pg_serial is nothing
like pg_notify.) The bug fixed here has the same symptoms and user
followup steps as 592a589a04bd456410b853d86bd05faa9432cbbb. Back-patch
to 9.5 (all supported versions).
Reviewed by Andrey Borodin and (in earlier versions) by Tom Lane.
Discussion: https://postgr.es/m/20190202083822.GC32531@gust.leadboat.com
|
|
In cases where Xcode is newer than the underlying macOS version,
asking xcodebuild for the SDK path will produce a pointer to the
SDK shipped with Xcode, which may end up building code that does
not work on the underlying macOS version. It appears that in
such cases, xcodebuild's answer also fails to match the default
behavior of Apple's compiler: assuming one has installed Xcode's
"command line tools", there will be an SDK for the OS's own version
in /Library/Developer/CommandLineTools, and the compiler will
default to using that. This is all pretty poorly documented,
but experimentation suggests that "xcrun --show-sdk-path" gives
the sysroot path that the compiler is actually using, at least
in some cases. Hence, try that first, but revert to xcodebuild
if xcrun fails (in very old Xcode, it is missing or lacks the
--show-sdk-path switch).
Also, "xcrun --show-sdk-path" may give a path that is valid but lacks
any OS version identifier. We don't really want that, since most
of the motivation for wiring -isysroot into the build flags at all
is to ensure that all parts of a PG installation are built against
the same SDK, even when considering extensions built later and/or on
a different machine. Insist on finding "N.N" in the directory name
before accepting the result. (Adding "--sdk macosx" to the xcrun
call seems to produce the same answer as xcodebuild, but usually
more quickly because it's cached, so we also try that as a fallback.)
The core reason why we don't want to use Xcode's default SDK in cases
like this is that Apple's technology for introducing new syscalls
does not play nice with Autoconf: for example, configure will think
that preadv/pwritev exist when using a Big Sur SDK, even when building
on an older macOS version where they don't exist. It'd be nice to
have a better solution to that problem, but this patch doesn't attempt
to fix that.
Per report from Sergey Shinderuk. Back-patch to all supported versions.
Discussion: https://postgr.es/m/ed3b8e5d-0da8-6ebd-fd1c-e0ac80a4b204@postgrespro.ru
|
|
The memory for the snapshot was leaked while serializing it to disk during
logical decoding. This memory will be freed only once walsender stops
streaming the changes. This can lead to a huge memory increase when master
logs Standby Snapshot too frequently say when the user is trying to create
many replication slots.
Reported-by: funnyxj.fxj@alibaba-inc.com
Diagnosed-by: funnyxj.fxj@alibaba-inc.com
Author: Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/033ab54c-6393-42ee-8ec9-2b399b5d8cde.funnyxj.fxj@alibaba-inc.com
|
|
This comment has been wrong since its introduction in commit
2c03216d8311.
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAD21AoAzz6qipFJBbGEaHmyWxvvNDp8httbwLR9tUQWaTjUs2Q@mail.gmail.com
|
|
brenext(), when parsing a '*' quantifier, forgot to return any "value"
for the token; per the equivalent case in next(), it should return
value 1 to indicate that greedy rather than non-greedy behavior is
wanted. The result is that the compiled regexp could behave like 'x*?'
rather than the intended 'x*', if we were unlucky enough to have
a zero in v->nextvalue at this point. That seems to happen with some
reliability if we have '.*' at the beginning of a BRE-mode regexp,
although that depends on the initial contents of a stack-allocated
struct, so it's not guaranteed to fail.
Found by Alexander Lakhin using valgrind testing. This bug seems
to be aboriginal in Spencer's code, so back-patch all the way.
Discussion: https://postgr.es/m/16814-6c5e3edd2bdf0d50@postgresql.org
|
|
On reflection, the order of operations in PostgresMain() is wrong.
These timeouts ought to be shut down before, not after, we do the
post-command-read CHECK_FOR_INTERRUPTS, to guarantee that any
timeout error will be detected there rather than at some ill-defined
later point (possibly after having wasted a lot of work).
This is really an error in the original idle_in_transaction_timeout
patch, so back-patch to 9.6 where that was introduced.
|
|
The deadlocks that the recovery conflict on lock is involved in can
happen between hot-standby backends and the startup process.
If a backend takes an access exclusive lock on the table and which
finally triggers the deadlock, that deadlock can be detected
as expected. On the other hand, previously, if the startup process
took an access exclusive lock and which finally triggered the deadlock,
that deadlock could not be detected and could remain even after
deadlock_timeout passed. This is a bug.
The cause of this bug was that the code for handling the recovery
conflict on lock didn't take care of deadlock case at all. It assumed
that deadlocks involving the startup process and backends were able
to be detected by the deadlock detector invoked within backends.
But this assumption was incorrect. The startup process also should
have invoked the deadlock detector if necessary.
To fix this bug, this commit makes the startup process invoke
the deadlock detector if deadlock_timeout is reached while handling
the recovery conflict on lock. Specifically, in that case, the startup
process requests all the backends holding the conflicting locks to
check themselves for deadlocks.
Back-patch to v9.6. v9.5 has also this bug, but per discussion we decided
not to back-patch the fix to v9.5. Because v9.5 doesn't have some
infrastructure codes (e.g., 37c54863cf) that this bug fix patch depends on.
We can apply those codes for the back-patch, but since the next minor
version release is the final one for v9.5, it's risky to do that. If we
unexpectedly introduce new bug to v9.5 by the back-patch, there is no
chance to fix that. We determined that the back-patch to v9.5 would give
more risk than gain.
Author: Fujii Masao
Reviewed-by: Bertrand Drouvot, Masahiko Sawada, Kyotaro Horiguchi
Discussion: https://postgr.es/m/4041d6b6-cf24-a120-36fa-1294220f8243@oss.nttdata.com
|
|
Commit bc43b7c2c0 used fabs() directly on an int variable, which
apparently requires an explicit cast on some platforms.
Per buildfarm.
|
|
In power_var_int(), the computation of the number of significant
digits to use in the computation used log(Abs(exp)), which isn't safe
because Abs(exp) returns INT_MIN when exp is INT_MIN. Use fabs()
instead of Abs(), so that the exponent is cast to a double before the
absolute value is taken.
Back-patch to 9.6, where this was introduced (by 7d9a4737c2).
Discussion: https://postgr.es/m/CAEZATCVd6pMkz=BrZEgBKyqqJrt2xghr=fNc8+Z=5xC6cgWrWA@mail.gmail.com
|
|
The code in charge of processing a single invalidation message has been
using since 568d413 the structure for relation mapping messages. This
had fortunately no consequence as both locate the database ID at the
same location, but it could become a problem in the future if this area
of the code changes.
Author: Konstantin Knizhnik
Discussion: https://postgr.es/m/8044c223-4d3a-2cdb-42bf-29940840ce94@postgrespro.ru
Backpatch-through: 9.5
|
|
Test script role names and error messages differed in v10, 9.6 and 9.5.
Discussion: https://postgr.es/m/20201221095028.GB3777719@rfd.leadboat.com
|
|
This makes existing sessions reflect "ALTER ROLE ... [NO]INHERIT" as
quickly as they have been reflecting "GRANT role_name". Back-patch to
9.5 (all supported versions).
Reviewed by Nathan Bossart.
Discussion: https://postgr.es/m/20201221095028.GB3777719@rfd.leadboat.com
|
|
The parsing of this parameter has been using strtoul(), which is not
portable across platforms. On most Unix platforms, unsigned long has a
size of 64 bits, while on Windows it is 32 bits. It is common in
recovery scenarios to rely on the output of txid_current() or even the
newer pg_current_xact_id() to get a transaction ID for setting up
recovery_target_xid. The value returned by those functions includes the
epoch in the computed result, which would cause strtoul() to fail where
unsigned long has a size of 32 bits once the epoch is incremented.
WAL records and 2PC data include only information about 32-bit XIDs and
it is not possible to have XIDs across more than one epoch, so
discarding the high bits from the transaction ID set has no impact on
recovery. On the contrary, the use of strtoul() prevents a consistent
behavior across platforms depending on the size of unsigned long.
This commit changes the parsing of recovery_target_xid to use
pg_strtouint64() instead, available down to 9.6. There is one TAP test
stressing recovery with recovery_target_xid, where a tweak based on
pg_reset{xlog,wal} is added to bump the XID epoch so as this change gets
tested, as per an idea from Alexander Lakhin.
Reported-by: Alexander Lakhin
Discussion: https://postgr.es/m/16780-107fd0c0385b1035@postgresql.org
Backpatch-through: 9.6
|
|
The jsonb || jsonb operator arbitrarily rejected certain combinations
of scalar and non-scalar inputs, while being willing to concatenate
other combinations. This was of course quite undocumented. Rather
than trying to document it, let's just remove the restriction,
creating a uniform rule that unless we are handling an object-to-object
concatenation, non-array inputs are converted to one-element arrays,
resulting in an array-to-array concatenation. (This does not change
the behavior for any case that didn't throw an error before.)
Per complaint from Joel Jacobson. Back-patch to all supported branches.
Discussion: https://postgr.es/m/163099.1608312033@sss.pgh.pa.us
|
|
A narrow reading of the C standard says that memcpy(x,x,n) is undefined,
although it's hard to envision an implementation that would really
misbehave. However, analysis tools such as valgrind might whine about
this; accordingly, let's band-aid relmapper.c to not do it.
See also 5b630501e, d3f4e8a8a, ad7b48ea0, and other similar fixes.
Apparently, none of those folk tried valgrinding initdb? This has been
like this for long enough that I'm surprised it hasn't been reported
before.
Back-patch, just in case anybody wants to use a back branch on a platform
that complains about this; we back-patched those earlier fixes too.
Discussion: https://postgr.es/m/161790.1608310142@sss.pgh.pa.us
|
|
This is a backport of commits 114541d58e and 6f59826f0 to the remaining
live branches.
|
|
This reverts commit 3a9e64aa0d96c8ffb6c682b082d0f72b1d373327.
Commit 4bad60e3 fixed the root of the problem that 3a9e64aa worked
around.
This enables proper pipelining of commands after terminating
replication, eliminating an undocumented limitation.
Discussion: https://postgr.es/m/3d57bc29-4459-578b-79cb-7641baf53c57%40iki.fi
Backpatch-through: 9.5
|
|
Backpatch-through: 9.5
|
