| Age | Commit message (Collapse) | Author |
|---|
|
It must be possible to multiply wal_buffers by XLOG_BLCKSZ without
overflowing int, or calculations in StartupXLOG will go badly wrong
and crash the server. Avoid that by imposing a maximum value on
wal_buffers. This will be just under 2GB, assuming the usual value
for XLOG_BLCKSZ.
Josh Berkus, per an analysis by Andrew Gierth.
|
|
Commit c9b0cbe98bd783e24a8c4d8d8ac472a494b81292 accidentally broke the
order of operations during postmaster shutdown: it resulted in removing
the per-socket lockfiles after, not before, postmaster.pid. This creates
a race-condition hazard for a new postmaster that's started immediately
after observing that postmaster.pid has disappeared; if it sees the
socket lockfile still present, it will quite properly refuse to start.
This error appears to be the explanation for at least some of the
intermittent buildfarm failures we've seen in the pg_upgrade test.
Another problem, which has been there all along, is that the postmaster
has never bothered to close() its listen sockets, but has just allowed them
to close at process death. This creates a different race condition for an
incoming postmaster: it might be unable to bind to the desired listen
address because the old postmaster is still incumbent. This might explain
some odd failures we've seen in the past, too. (Note: this is not related
to the fact that individual backends don't close their client communication
sockets. That behavior is intentional and is not changed by this patch.)
Fix by adding an on_proc_exit function that closes the postmaster's ports
explicitly, and (in 9.3 and up) reshuffling the responsibility for where
to unlink the Unix socket files. Lock file unlinking can stay where it
is, but teach it to unlink the lock files in reverse order of creation.
|
|
An outer join clause that didn't actually reference the RHS (perhaps only
after constant-folding) could confuse the join order enforcement logic,
leading to wrong query results. Also, nested occurrences of such things
could trigger an Assertion that on reflection seems incorrect.
Per fuzz testing by Andreas Seltenreich. The practical use of such cases
seems thin enough that it's not too surprising we've not heard field
reports about it.
This has been broken for a long time, so back-patch to all active branches.
|
|
Although I think on all modern machines floating division by zero
results in Infinity not SIGFPE, we still don't want infinities
running around in the planner's costing estimates; too much risk
of that leading to insane behavior.
grouping_planner() failed to consider the possibility that final_rel
might be known dummy and hence have zero rowcount. (I wonder if it
would be better to set a rows estimate of 1 for dummy relations?
But at least in the back branches, changing this convention seems
like a bad idea, so I'll leave that for another day.)
Make certain that get_variable_numdistinct() produces a nonzero result.
The case that can be shown to be broken is with stadistinct < 0.0 and
small ntuples; we did not prevent the result from rounding to zero.
For good luck I applied clamp_row_est() to all the nonconstant return
values.
In ExecChooseHashTableSize(), Assert that we compute positive nbuckets
and nbatch. I know of no reason to think this isn't the case, but it
seems like a good safety check.
Per reports from Piotr Stefaniak. Back-patch to all active branches.
|
|
Don't print a WARNING if we get ESRCH from a kill() that's attempting
to cancel an autovacuum worker. It's possible (and has been seen in the
buildfarm) that the worker is already gone by the time we are able to
execute the kill, in which case the failure is harmless. About the only
plausible reason for reporting such cases would be to help debug corrupted
lock table contents, but this is hardly likely to be the most important
symptom if that happens. Moreover issuing a WARNING might scare users
more than is warranted.
Also, since sending a signal to an autovacuum worker is now entirely a
routine thing, and the worker will log the query cancel on its end anyway,
reduce the message saying we're doing that from LOG to DEBUG1 level.
Very minor cosmetic cleanup as well.
Since the main practical reason for doing this is to avoid unnecessary
buildfarm failures, back-patch to all active branches.
|
|
While postgres' use of SSL renegotiation is a good idea in theory, it
turned out to not work well in practice. The specification and openssl's
implementation of it have lead to several security issues. Postgres' use
of renegotiation also had its share of bugs.
Additionally OpenSSL has a bunch of bugs around renegotiation, reported
and open for years, that regularly lead to connections breaking with
obscure error messages. We tried increasingly complex workarounds to get
around these bugs, but we didn't find anything complete.
Since these connection breakages often lead to hard to debug problems,
e.g. spuriously failing base backups and significant latency spikes when
synchronous replication is used, we have decided to change the default
setting for ssl renegotiation to 0 (disabled) in the released
backbranches and remove it entirely in 9.5 and master..
Author: Michael Paquier, with changes by me
Discussion: 20150624144148.GQ4797@alap3.anarazel.de
Backpatch: 9.0-9.4; 9.5 and master get a different patch
|
|
In GIN, an all-zeros page would be leaked forever, and never reused. Just
add them to the FSM in vacuum, and they will be reinitialized when grabbed
from the FSM. On master and 9.5, attempting to access the page's opaque
struct also caused an assertion failure, although that was otherwise
harmless.
Reported by Jeff Janes. Backpatch to all supported versions.
|
|
The signature for this changed in 9.2
|
|
This was broken by commit 0e7e355f27302b62af3e1add93853ccd45678443 and
friends, which ignored the fact that gzopen() will treat "-1" in the
mode argument as an invalid character, which it ignores, and a flag for
compression level 1. Now, when this value is encountered no compression
level flag is passed to gzopen, leaving it to use the zlib default.
Also, enforce the documented allowed range for pg_dump's -Z option,
namely 0 .. 9, and remove some consequently dead code from
pg_backup_tar.c.
Problem reported by Marc Mamin.
Backpatch to 9.1, like the patch that introduced the bug.
|
|
If there were no subtransactions (or multixacts) active, we would calculate
the oldestxid == next xid. That's correct, but if next XID happens to be
on the next pg_subtrans (pg_multixact) page, the page does not exist yet,
and SimpleLruTruncate will produce an "apparent wraparound" warning. The
warning is harmless in this case, but looks very alarming to users.
Backpatch to all supported versions. Patch and analysis by Thomas Munro.
|
|
As reported by Bill Parker, PL/Tcl did not validate some malloc() calls
against NULL return. Fix by using palloc() in a new long-lived memory
context instead. This allows us to simplify error handling too, by
simply deleting the memory context instead of doing retail frees.
There's still a lot that could be done to improve PL/Tcl's memory
handling ...
This is pretty ancient, so backpatch all the way back.
Author: Michael Paquier and Álvaro Herrera
Discussion: https://www.postgresql.org/message-id/CAFrbyQwyLDYXfBOhPfoBGqnvuZO_Y90YgqFM11T2jvnxjLFmqw@mail.gmail.com
|
|
xlc provides "long long" unconditionally at C99-compatible language
levels, and this option provokes a warning. The warning interferes with
"configure" tests that fail in response to any warning. Notably, before
commit 85a2a8903f7e9151793308d0638621003aded5ae, it interfered with the
test for -qnoansialias. Back-patch to 9.0 (all supported versions).
|
|
It's standard for quicksort implementations, after having partitioned the
input into two subgroups, to recurse to process the smaller partition and
then handle the larger partition by iterating. This method guarantees
that no more than log2(N) levels of recursion can be needed. However,
Bentley and McIlroy argued that checking to see which partition is smaller
isn't worth the cycles, and so their code doesn't do that but just always
recurses on the left partition. In most cases that's fine; but with
worst-case input we might need O(N) levels of recursion, and that means
that qsort could be driven to stack overflow. Such an overflow seems to
be the only explanation for today's report from Yiqing Jin of a SIGSEGV
in med3_tuple while creating an index of a couple billion entries with a
very large maintenance_work_mem setting. Therefore, let's spend the few
additional cycles and lines of code needed to choose the smaller partition
for recursion.
Also, fix up the qsort code so that it properly uses size_t not int for
some intermediate values representing numbers of items. This would only
be a live risk when sorting more than INT_MAX bytes (in qsort/qsort_arg)
or tuples (in qsort_tuple), which I believe would never happen with any
caller in the current core code --- but perhaps it could happen with
call sites in third-party modules? In any case, this is trouble waiting
to happen, and the corrected code is probably if anything shorter and
faster than before, since it removes sign-extension steps that had to
happen when converting between int and size_t.
In passing, move a couple of CHECK_FOR_INTERRUPTS() calls so that it's
not necessary to preserve the value of "r" across them, and prettify
the output of gen_qsort_tuple.pl a little.
Back-patch to all supported branches. The odds of hitting this issue
are probably higher in 9.4 and up than before, due to the new ability
to allocate sort workspaces exceeding 1GB, but there's no good reason
to believe that it's impossible to crash older branches this way.
|
|
This allows PostgreSQL modules and their dependencies to have undefined
symbols, resolved at runtime. Perl module shared objects rely on that
in Perl 5.8.0 and later. This fixes the crash when PL/PerlU loads such
modules, as the hstore_plperl test suite does. Module authors can link
using -Wl,-G to permit undefined symbols; by default, linking will fail
as it has. Back-patch to 9.0 (all supported versions).
|
|
Per Coverity (not that any of these are so non-obvious that they should not
have been caught before commit). The extent of leakage is probably minor
to unnoticeable, but a leak is a leak. Back-patch as necessary.
Michael Paquier
|
|
Ordinarily, a failure (unexpected exit status) of the startup subprocess
should be considered fatal, so the postmaster should just close up shop
and quit. However, if we sent the startup process a SIGQUIT or SIGKILL
signal, the failure is hardly "unexpected", and we should attempt restart;
this is necessary for recovery from ordinary backend crashes in hot-standby
scenarios. I attempted to implement the latter rule with a two-line patch
in commit 442231d7f71764b8c628044e7ce2225f9aa43b67, but it now emerges that
that patch was a few bricks shy of a load: it failed to distinguish the
case of a signaled startup process from the case where the new startup
process crashes before reaching database consistency. That resulted in
infinitely respawning a new startup process only to have it crash again.
To handle this properly, we really must track whether we have sent the
*current* startup process a kill signal. Rather than add yet another
ad-hoc boolean to the postmaster's state, I chose to unify this with the
existing RecoveryError flag into an enum tracking the startup process's
state. That seems more consistent with the postmaster's general state
machine design.
Back-patch to 9.0, like the previous patch.
|
|
The psql crash happened when no current connection existed. (The second
new check is optional given today's undocumented NULL argument handling
in PQhost() etc.) Back-patch to 9.0 (all supported versions).
|
|
My previous back-patching went wrong.
|
|
If an allocation fails in the main message handling loop, pqParseInput3
or pqParseInput2, it should not be treated as "not enough data available
yet". Otherwise libpq will wait indefinitely for more data to arrive from
the server, and gets stuck forever.
This isn't a complete fix - getParamDescriptions and getCopyStart still
have the same issue, but it's a step in the right direction.
Michael Paquier and me. Backpatch to all supported versions.
|
|
Build.bat and vcregress.bat got similar treatment years ago. I'm not sure
why install.bat wasn't treated at the same time, but it seems like a good
idea anyway.
The immediate problem with the old install.bat was that it had quoting
issues, and wouldn't work if the target directory's name contained spaces.
This fixes that problem.
I committed this to master yesterday, this is a backpatch of the same for
all supported versions.
|
|
Expose PG_VERSION_NUM (e.g., "90600") as a Make variable; but for
consistency with the other Make variables holding similar info,
call the variable just VERSION_NUM not PG_VERSION_NUM.
There was some discussion of making this value available as a pg_config
value as well. However, that would entail substantially more work than
this two-line patch. Given that there was not exactly universal consensus
that we need this at all, let's just do a minimal amount of work for now.
Back-patch of commit a5d489ccb7e613c7ca3be6141092b8c1d2c13fa7, so that this
variable is actually useful for its intended purpose sometime before 2020.
Michael Paquier, reviewed by Pavel Stehule
|
|
|
|
|
|
VACUUM FREEZE generated false cancelations of standby queries on an
otherwise idle master. Caused by an off-by-one error on cutoff_xid
which goes back to original commit.
Backpatch to all versions 9.0+
Analysis and report by Marco Nenciarini
Bug fix by Simon Riggs
|
|
Commit f3b5565dd4e59576be4c772da364704863e6a835 was a couple of bricks shy
of a load; specifically, it missed putting pg_trigger_tgrelid_tgname_index
into the relcache init file, because that index is not used by any
syscache. However, we have historically nailed that index into cache for
performance reasons. The upshot was that load_relcache_init_file always
decided that the init file was busted and silently ignored it, resulting
in a significant hit to backend startup speed.
To fix, reinstantiate RelationIdIsInInitFile() as a wrapper around
RelationSupportsSysCache(), which can know about additional relations
that should be in the init file despite being unknown to syscache.c.
Also install some guards against future mistakes of this type: make
write_relcache_init_file Assert that all nailed relations get written to
the init file, and make load_relcache_init_file emit a WARNING if it takes
the "wrong number of nailed relations" exit path. Now that we remove the
init files during postmaster startup, that case should never occur in the
field, even if we are starting a minor-version update that added or removed
rels from the nailed set. So the warning shouldn't ever be seen by end
users, but it will show up in the regression tests if somebody breaks this
logic.
Back-patch to all supported branches, like the previous commit.
|
|
This supplements the GNU libc bug #6530 workarounds introduced in commit
54cd4f04576833abc394e131288bf3dd7dcf4806. On affected systems, a
tar-format pg_basebackup failed when some filename beneath the data
directory was not valid character data in the postmaster/walsender
locale. Back-patch to 9.1, where pg_basebackup was introduced. Extant,
bug-prone conversion specifications receive only ASCII bytes or involve
low-importance messages.
|
|
|
|
This avoids the problem that it might go to sleep for an unreasonable
amount of time in unusual conditions like the server clock moving
backwards an unreasonable amount of time.
(Simply moving the server clock forward again doesn't solve the problem
unless you wake up the autovacuum launcher manually, say by sending it
SIGHUP).
Per trouble report from Prakash Itnal in
https://www.postgresql.org/message-id/CAHC5u79-UqbapAABH2t4Rh2eYdyge0Zid-X=Xz-ZWZCBK42S0Q@mail.gmail.com
Analyzed independently by Haribabu Kommi and Tom Lane.
|
|
Patch by Michael Paquier
|
|
Patch by Michael Paquier
|
|
Patch by Michael Paquier
Conflicts:
src/interfaces/ecpg/preproc/variable.c
src/interfaces/ecpg/preproc/pgc.l
|
|
Patch by Michael Paquier
|
|
|
|
We don't know why a few Windows users have seen this fail, but the
taciturnity of the error message certainly isn't helping debug it.
Let's at least find out which LC category isn't working.
|
|
When we invalidate the relcache entry for a system catalog or index, we
must also delete the relcache "init file" if the init file contains a copy
of that rel's entry. The old way of doing this relied on a specially
maintained list of the OIDs of relations present in the init file: we made
the list either when reading the file in, or when writing the file out.
The problem is that when writing the file out, we included only rels
present in our local relcache, which might have already suffered some
deletions due to relcache inval events. In such cases we correctly decided
not to overwrite the real init file with incomplete data --- but we still
used the incomplete initFileRelationIds list for the rest of the current
session. This could result in wrong decisions about whether the session's
own actions require deletion of the init file, potentially allowing an init
file created by some other concurrent session to be left around even though
it's been made stale.
Since we don't support changing the schema of a system catalog at runtime,
the only likely scenario in which this would cause a problem in the field
involves a "vacuum full" on a catalog concurrently with other activity, and
even then it's far from easy to provoke. Remarkably, this has been broken
since 2002 (in commit 786340441706ac1957a031f11ad1c2e5b6e18314), but we had
never seen a reproducible test case until recently. If it did happen in
the field, the symptoms would probably involve unexpected "cache lookup
failed" errors to begin with, then "could not open file" failures after the
next checkpoint, as all accesses to the affected catalog stopped working.
Recovery would require manually removing the stale "pg_internal.init" file.
To fix, get rid of the initFileRelationIds list, and instead consult
syscache.c's list of relations used in catalog caches to decide whether a
relation is included in the init file. This should be a tad more efficient
anyway, since we're replacing linear search of a list with ~100 entries
with a binary search. It's a bit ugly that the init file contents are now
so directly tied to the catalog caches, but in practice that won't make
much difference.
Back-patch to all supported branches.
|
|
We should set MyProc->databaseId after acquiring the per-database lock,
not beforehand. The old way risked deadlock against processes trying to
copy or delete the target database, since they would first acquire the lock
and then wait for processes with matching databaseId to exit; that left a
window wherein an incoming process could set its databaseId and then block
on the lock, while the other process had the lock and waited in vain for
the incoming process to exit.
CountOtherDBBackends() would time out and fail after 5 seconds, so this
just resulted in an unexpected failure not a permanent lockup, but it's
still annoying when it happens. A real-world example of a use-case is that
short-duration connections to a template database should not cause CREATE
DATABASE to fail.
Doing it in the other order should be fine since the contract has always
been that processes searching the ProcArray for a database ID must hold the
relevant per-database lock while searching. Thus, this actually removes
the former race condition that required an assumption that storing to
MyProc->databaseId is atomic.
It's been like this for a long time, so back-patch to all active branches.
|
|
|
|
The argument that this is a sufficiently-expected case to be silently
ignored seems pretty thin. Andres had brought it up back when we were
still considering that most fsync failures should be hard errors, and it
probably would be legit not to fail hard for ETXTBSY --- but the same is
true for EROFS and other cases, which is why we gave up on hard failures.
ETXTBSY is surely not a normal case, so logging the failure seems fine
from here.
|
|
Commit 2ce439f3379aed857517c8ce207485655000fc8e introduced a rather serious
regression, namely that if its scan of the data directory came across any
un-fsync-able files, it would fail and thereby prevent database startup.
Worse yet, symlinks to such files also caused the problem, which meant that
crash restart was guaranteed to fail on certain common installations such
as older Debian.
After discussion, we agreed that (1) failure to start is worse than any
consequence of not fsync'ing is likely to be, therefore treat all errors
in this code as nonfatal; (2) we should not chase symlinks other than
those that are expected to exist, namely pg_xlog/ and tablespace links
under pg_tblspc/. The latter restriction avoids possibly fsync'ing a
much larger part of the filesystem than intended, if the user has left
random symlinks hanging about in the data directory.
This commit takes care of that and also does some code beautification,
mainly moving the relevant code into fd.c, which seems a much better place
for it than xlog.c, and making sure that the conditional compilation for
the pre_sync_fname pass has something to do with whether pg_flush_data
works.
I also relocated the call site in xlog.c down a few lines; it seems a
bit silly to be doing this before ValidateXLOGDirectoryStructure().
The similar logic in initdb.c ought to be made to match this, but that
change is noncritical and will be dealt with separately.
Back-patch to all active branches, like the prior commit.
Abhijit Menon-Sen and Tom Lane
|
|
specparse.y and specscanner.l used "string" as a token name. Now, bison
likes to define each token name as a macro for the token code it assigns,
which means those names are basically off-limits for any other use within
the grammar file or included headers. So names as generic as "string" are
dangerous. This is what was causing the recent failures on protosciurus:
some versions of Solaris' sys/kstat.h use "string" as a field name.
With late-model bison we don't see this problem because the token macros
aren't defined till later (that is why castoroides didn't show the problem
even though it's on the same machine). But protosciurus uses bison 1.875
which defines the token macros up front.
This land mine has been there from day one; we'd have found it sooner
except that protosciurus wasn't trying to run the isolation tests till
recently.
To fix, rename the token to "string_literal" which is hopefully less
likely to collide with names used by system headers. Back-patch to
all branches containing the isolation tests.
|
|
The name objectType is widely used as a field name, and it's pure luck that
this conflict has not caused pgindent to go crazy before. It messed up
pg_audit.c pretty good though. Since pg_shdepend.c doesn't export this
typedef and only uses it in three places, changing that seems saner than
changing the field usages.
Back-patch because we're contemplating using the union of all branch
typedefs for future pgindent runs, so this won't fix anything if it
stays the same in back branches.
|
|
Since 7.3.2, libpq has been coded in such a way that the only SSL protocol
it would allow was TLS v1. That approach is looking increasingly obsolete.
In commit 820f08cabdcbb899 we fixed it to allow TLS >= v1, but did not
back-patch the change at the time, partly out of caution and partly because
the question was confused by a contemporary server-side change to reject
the now-obsolete SSL protocol v3. 9.4 has now been out long enough that
it seems safe to assume the change is OK; hence, back-patch into 9.0-9.3.
(I also chose to back-patch some relevant comments added by commit
326e1d73c476a0b5, but did *not* change the server behavior; hence, pre-9.4
servers will continue to allow SSL v3, even though no remotely modern
client will request it.)
Per gripe from Jan Bilek.
|
|
This reverts commit 16304a013432931e61e623c8d85e9fe24709d9ba, except
for its changes in src/port/snprintf.c; as well as commit
cac18a76bb6b08f1ecc2a85e46c9d2ab82dd9d23 which is no longer needed.
Fujii Masao reported that the previous commit caused failures in psql on
OS X, since if one exits the pager program early while viewing a query
result, psql sees an EPIPE error from fprintf --- and the wrapper function
thought that was reason to panic. (It's a bit surprising that the same
does not happen on Linux.) Further discussion among the security list
concluded that the risk of other such failures was far too great, and
that the one-size-fits-all approach to error handling embodied in the
previous patch is unlikely to be workable.
This leaves us again exposed to the possibility of the type of failure
envisioned in CVE-2015-3166. However, that failure mode is strictly
hypothetical at this point: there is no concrete reason to believe that
an attacker could trigger information disclosure through the supposed
mechanism. In the first place, the attack surface is fairly limited,
since so much of what the backend does with format strings goes through
stringinfo.c or psprintf(), and those already had adequate defenses.
In the second place, even granting that an unprivileged attacker could
control the occurrence of ENOMEM with some precision, it's a stretch to
believe that he could induce it just where the target buffer contains some
valuable information. So we concluded that the risk of non-hypothetical
problems induced by the patch greatly outweighs the security risks.
We will therefore revert, and instead undertake closer analysis to
identify specific calls that may need hardening, rather than attempt a
universal solution.
We have kept the portion of the previous patch that improved snprintf.c's
handling of errors when it calls the platform's sprintf(). That seems to
be an unalloyed improvement.
Security: CVE-2015-3166
|
|
The point of the assertion is to ensure that the arrays allocated in stack
are large enough, but the check was one item short.
This won't matter in practice because MaxIndexTuplesPerPage is an
overestimate, so you can't have that many items on a page in reality.
But let's be tidy.
Spotted by Anastasia Lubennikova. Backpatch to all supported versions, like
the patch that added the assertion.
|
|
In 9.1 and earlier, it is possible for index_getnext() to try to examine
a heap buffer for possible HOT-prune when in recovery; this causes a
problem when a multixact is found in a tuple's Xmax, because
GetMultiXactIdMembers refuses to run when in recovery, raising an error:
ERROR: cannot GetMultiXactIdMembers() during recovery
This can be solved easily by having MultiXactIdIsRunning always return
false when in recovery, which is reasonable because a HOT standby cannot
acquire further tuple locks nor update/delete tuples.
(Note: it doesn't look like this specific code path has a problem in
9.2, because instead of doing HeapTupleSatisfiesUpdate directly,
heap_hot_search_buffer uses HeapTupleIsSurelyDead instead. Still, there
may be other paths affected by the same bug, for instance in pgrowlocks,
and the multixact code hasn't changed; so apply the same fix
throughout.)
Apply this fix to 9.0 through 9.2. In 9.3 the multixact code has been
changed completely and is no longer subject to this problem.
Per report from Marko Tiikkaja,
https://www.postgresql.org/message-id/54EB3283.2080305@joh.to
Analysis by Andres Freund
|
|
|
|
The old one didn't include %m anywhere, and required extra
translation.
Report by Peter Eisentraut. Fix by me. Review by Tom Lane.
|
|
PostgreSQL already checked the vast majority of these, missing this
handful that nearly cannot fail. If putenv() failed with ENOMEM in
pg_GSS_recvauth(), authentication would proceed with the wrong keytab
file. If strftime() returned zero in cache_locale_time(), using the
unspecified buffer contents could lead to information exposure or a
crash. Back-patch to 9.0 (all supported versions).
Other unchecked calls to these functions, especially those in frontend
code, pose negligible security concern. This patch does not address
them. Nonetheless, it is always better to check return values whose
specification provides for indicating an error.
In passing, fix an off-by-one error in strftime_win32()'s invocation of
WideCharToMultiByte(). Upon retrieving a value of exactly MAX_L10N_DATA
bytes, strftime_win32() would overrun the caller's buffer by one byte.
MAX_L10N_DATA is chosen to exceed the length of every possible value, so
the vulnerable scenario probably does not arise.
Security: CVE-2015-3166
|
|
All known standard library implementations of these functions can fail
with ENOMEM. A caller neglecting to check for failure would experience
missing output, information exposure, or a crash. Check return values
within wrappers and code, currently just snprintf.c, that bypasses the
wrappers. The wrappers do not return after an error, so their callers
need not check. Back-patch to 9.0 (all supported versions).
Popular free software standard library implementations do take pains to
bypass malloc() in simple cases, but they risk ENOMEM for floating point
numbers, positional arguments, large field widths, and large precisions.
No specification demands such caution, so this commit regards every call
to a printf family function as a potential threat.
Injecting the wrappers implicitly is a compromise between patch scope
and design goals. I would prefer to edit each call site to name a
wrapper explicitly. libpq and the ECPG libraries would, ideally, convey
errors to the caller rather than abort(). All that would be painfully
invasive for a back-patched security fix, hence this compromise.
Security: CVE-2015-3166
|
|
The next commit needs it. Back-patch to 9.0 (all supported versions).
|
