| Age | Commit message (Collapse) | Author |
|---|
|
This coding technique is undesirable because (a) it leaks the FD for
the rest of the transaction if the SRF is not run to completion, and
(b) allocated FDs are a scarce resource, but multiple interleaved
uses of the relevant functions could eat many such FDs.
In v11 and later, a query such as "SELECT pg_ls_waldir() LIMIT 1"
yields a warning about the leaked FD, and the only reason there's
no warning in earlier branches is that fd.c didn't whine about such
leaks before commit 9cb7db3f0. Even disregarding the warning, it
wouldn't be too hard to run a backend out of FDs with careless use
of these SQL functions.
Hence, rewrite the function so that it reads the directory within
a single call, returning the results as a tuplestore rather than
via value-per-call mode.
There are half a dozen other built-in SRFs with similar problems,
but let's fix this one to start with, just to see if the buildfarm
finds anything wrong with the code.
In passing, fix bogus error report for stat() failure: it was
whining about the directory when it should be fingering the
individual file. Doubtless a copy-and-paste error.
Back-patch to v10 where this function was added.
Justin Pryzby, with cosmetic tweaks and test cases by me
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
|
|
If the command is attempted for an extension that the object already
depends on, silently do nothing.
In particular, this means that if a database containing multiple such
entries is dumped, the restore will silently do the right thing and
record just the first one. (At least, in a world where pg_dump does
dump such entries -- which it doesn't currently, but it will.)
Backpatch to 9.6, where this kind of dependency was introduced.
Reviewed-by: Ibrar Ahmed, Tom Lane (offlist)
Discussion: https://postgr.es/m/20200217225333.GA30974@alvherre.pgsql
|
|
Previously, event triggers were restored just after regular triggers
(and FK constraints, which are basically triggers). This is risky
since an event trigger, once installed, could interfere with subsequent
restore commands. Worse, because event triggers don't have any
particular dependencies on any post-data objects, a parallel restore
would consider them eligible to be restored the moment the post-data
phase starts, allowing them to also interfere with restoration of a
whole bunch of objects that would have been restored before them in
a serial restore. There's no way to completely remove the risk of a
misguided event trigger breaking the restore, since if nothing else
it could break other event triggers. But we can certainly push them
to later in the process to minimize the hazard.
To fix, tweak the RestorePass mechanism introduced by commit 3eb9a5e7c
so that event triggers are handled as part of the post-ACL processing
pass (renaming the "REFRESH" pass to "POST_ACL" to reflect its more
general use). This will cause them to restore after everything except
matview refreshes, which seems OK since matview refreshes really ought
to run in the post-restore state of the database. In a parallel
restore, event triggers and matview refreshes might be intermixed,
but that seems all right as well.
Also update the code and comments in pg_dump_sort.c so that its idea
of how things are sorted agrees with what actually happens due to
the RestorePass mechanism. This is mostly cosmetic: it'll affect the
order of objects in a dump's TOC, but not the actual restore order.
But not changing that would be quite confusing to somebody reading
the code.
Back-patch to all supported branches.
Fabrízio de Royes Mello, tweaked a bit by me
Discussion: https://postgr.es/m/CAFcNs+ow1hmFox8P--3GSdtwz-S3Binb6ZmoP6Vk+Xg=K6eZNA@mail.gmail.com
|
|
Previously "waiting" could appear twice via PS in case of lock conflict
in hot standby mode. Specifically this issue happend when the delay
in WAL application determined by max_standby_archive_delay and
max_standby_streaming_delay had passed but it took more than 500 msec
to cancel all the conflicting transactions. Especially we can observe this
easily by setting those delay parameters to -1.
The cause of this issue was that WaitOnLock() and
ResolveRecoveryConflictWithVirtualXIDs() added "waiting" to
the process title in that case. This commit prevents
ResolveRecoveryConflictWithVirtualXIDs() from reporting waiting
in case of lock conflict, to fix the bug.
Back-patch to all back branches.
Author: Masahiko Sawada
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+fd4k4mXWTwfQLS3RPwGr4xnfAEs1ysFfgYHvmmoUgv6Zxvmg@mail.gmail.com
|
|
At the end of recovery, standby mode is turned off to re-fetch the last
valid record from archive or pg_wal. Previously, if recovery target was
reached and standby mode was turned off while the current WAL source
was stream, recovery could try to retrieve WAL file containing the last
valid record unexpectedly from stream even though not in standby mode.
This caused an assertion failure. That is, the assertion test confirms that
WAL file should not be retrieved from stream if standby mode is not true.
This commit moves back the current WAL source to archive if it's stream
even though not in standby mode, to avoid that assertion failure.
This issue doesn't cause the server to crash when built with assertion
disabled. In this case, the attempt to retrieve WAL file from stream not
in standby mode just fails. And then recovery tries to retrieve WAL file
from archive or pg_wal.
Back-patch to all supported branches.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20200227.124830.2197604521555566121.horikyota.ntt@gmail.com
|
|
|
|
Using ALTER TABLE ATTACH PARTITION causes an assertion failure when
attempting to work on a partitioned index, because partitioned indexes
cannot have partition bounds.
The grammar of ALTER TABLE ATTACH PARTITION requires partition bounds,
but not ALTER INDEX, so mixing ALTER TABLE with partitioned indexes is
confusing. Hence, on HEAD, prevent ALTER TABLE to attach a partition if
the relation involved is a partitioned index. On back-branches, as
applications may rely on the existing behavior, just remove the
culprit assertion.
Reported-by: Alexander Lakhin
Author: Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/16276-5cd1dcc8fb8be7b5@postgresql.org
Backpatch-through: 11
|
|
Commit 356687bd8 omitted to remove leftover code for destroying
a hashed subplan's hash tables, with the result that the tables
were always rebuilt not reused; this leads to severe memory
leakage if a hashed subplan is re-executed enough times.
Moreover, the code for reusing the hashnulls table had a typo
that would have made it do the wrong thing if it were reached.
Looking at the code coverage report shows severe under-coverage
of the potential callers of ResetTupleHashTable, so add some test
cases that exercise them.
Andreas Karlsson and Tom Lane, per reports from Ranier Vilela
and Justin Pryzby.
Backpatch to v11, as the faulty commit was.
Discussion: https://postgr.es/m/edb62547-c453-c35b-3ed6-a069e4d6b937@proxel.se
Discussion: https://postgr.es/m/CAEudQAo=DCebm1RXtig9OH+QivpS97sMkikt0A9qHmMUs+g6ZA@mail.gmail.com
Discussion: https://postgr.es/m/20200210032547.GA1412@telsasoft.com
|
|
Such an access became possible when commit 246a6c8f7 added more
aggressive cleanup of orphaned temp relations by autovacuum.
Since autovacuum's snapshot might be slightly stale, it could
attempt to access an already-dropped temp namespace, resulting in
an assertion failure or null-pointer dereference. (In practice,
since we don't drop temp namespaces automatically but merely
recycle them, this situation could only arise if a superuser does
a manual drop of a temp namespace. Still, that should be allowed.)
The core of the bug, IMO, is that isTempNamespaceInUse and its callers
failed to think hard about whether to treat "temp namespace isn't there"
differently from "temp namespace isn't in use". In hopes of forestalling
future mistakes of the same ilk, replace that function with a new one
checkTempNamespaceStatus, which makes the same tests but returns a
three-way enum rather than just a bool. isTempNamespaceInUse is gone
entirely in HEAD; but just in case some external code is relying on it,
keep it in the back branches, as a bug-compatible wrapper around the
new function.
Per report originally from Prabhat Kumar Sahu, investigated by Mahendra
Singh and Michael Paquier; the final form of the patch is my fault.
This replaces the failed fix attempt in a052f6cbb.
Backpatch as far as v11, as 246a6c8f7 was.
Discussion: https://postgr.es/m/CAKYtNAr9Zq=1-ww4etHo-VCC-k120YxZy5OS01VkaLPaDbv2tg@mail.gmail.com
|
|
OpenBSD falls back to "C" when using an incorrect input with setlocale()
and LC_CTYPE, causing this test, introduced by 008cf04, to fail. This
removes the culprit test to avoid the portability issue.
Per report from Robert Haas, via buildfarm member curculio.
Discussion: https://postgr.es/m/CA+TgmoZ6ddh3mHD9gU8DvNYoFmuJaYYn1+4AvZNp25vTdRwCAQ@mail.gmail.com
Backpatch-through: 11
|
|
Attempting to use pg_checksums (pg_verify_checksums in 11) on a data
folder which includes tablespace paths used across multiple major
versions would cause pg_checksums to scan all directories present in
pg_tblspc, and not only marked with TABLESPACE_VERSION_DIRECTORY. This
could lead to failures when for example running sanity checks on an
upgraded instance with --check. Even worse, it was possible to rewrite
on-disk pages with --enable for a cluster potentially online.
This commit makes pg_checksums skip any directories not named
TABLESPACE_VERSION_DIRECTORY, similarly to what is done for base
backups.
Reported-by: Michael Banck
Author: Michael Banck, Bernd Helmle
Discussion: https://postgr.es/m/62031974fd8e941dd8351fbc8c7eff60d59c5338.camel@credativ.de
backpatch-through: 11
|
|
The original coding failed to properly quote those arguments, leading to
failures when using quotes in the values used. As the quoting can be
encoding-sensitive, the connection to the backend needs to be taken
before applying the correct quoting.
Author: Michael Paquier
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/20200214041004.GB1998@paquier.xyz
Backpatch-through: 9.5
|
|
An instance of PostgreSQL crashing with a bad timing could leave behind
temporary pg_internal.init files, potentially causing failures when
verifying checksums. As the same exclusion lists are used between
pg_rewind, pg_checksums and basebackup.c, all those tools are extended
with prefix checks to keep everything in sync, with dedicated checks
added for pg_internal.init.
Backpatch down to 11, where pg_checksums (pg_verify_checksums in 11) and
checksum verification for base backups have been introduced.
Reported-by: Michael Banck
Author: Michael Paquier
Reviewed-by: Kyotaro Horiguchi, David Steele
Discussion: https://postgr.es/m/62031974fd8e941dd8351fbc8c7eff60d59c5338.camel@credativ.de
Backpatch-through: 11
|
|
|
|
Reported-by: Daniel Verite <daniel@manitou-mail.org>
|
|
The function hash table keys made by compute_function_hashkey() failed
to distinguish event-trigger call context from regular call context.
This meant that once we'd successfully made a hash entry for an event
trigger (either by validation, or by normal use as an event trigger),
an attempt to call the trigger function as a plain function would
find this hash entry and thereby bypass the you-can't-do-that check in
do_compile(). Thus we'd attempt to execute the function, leading to
strange errors or even crashes, depending on function contents and
server version.
To fix, add an isEventTrigger field to PLpgSQL_func_hashkey,
paralleling the longstanding infrastructure for regular triggers.
This fits into what had been pad space, so there's no risk of an ABI
break, even assuming that any third-party code is looking at these
hash keys. (I considered replacing isTrigger with a PLpgSQL_trigtype
enum field, but felt that that carried some API/ABI risk. Maybe we
should change it in HEAD though.)
Per bug #16266 from Alexander Lakhin. This has been broken since
event triggers were invented, so back-patch to all supported branches.
Discussion: https://postgr.es/m/16266-fcd7f838e97ba5d4@postgresql.org
|
|
VACUUM may truncate heap in several batches. The activity report
is logged for each batch, and contains the number of pages in the table
before and after the truncation, and also the elapsed time during
the truncation. Previously the elapsed time reported in each batch was
the total elapsed time since starting the truncation until finishing
each batch. For example, if the truncation was processed dividing into
three batches, the second batch reported the accumulated time elapsed
during both first and second batches. This is strange and confusing
because the number of pages in the table reported together is not
total. Instead, each batch should report the time elapsed during
only that batch.
The cause of this issue was that the resource usage snapshot was
initialized only at the beginning of the truncation and was never
reset later. This commit fixes the issue by changing VACUUM so that
the resource usage snapshot is reset at each batch.
Back-patch to all supported branches.
Reported-by: Tatsuhito Kasahara
Author: Tatsuhito Kasahara
Reviewed-by: Masahiko Sawada, Fujii Masao
Discussion: https://postgr.es/m/CAP0=ZVJsf=NvQuy+QXQZ7B=ZVLoDV_JzsVC1FRsF1G18i3zMGg@mail.gmail.com
|
|
Manifested as
ERROR: subtransaction logged without previous top-level txn record
this check forbids legit behaviours like
- First xl_xact_assignment record is beyond reading, i.e. earlier
restart_lsn.
- After restart_lsn there is some change of a subxact.
- After that, there is second xl_xact_assignment (for another subxact)
revealing the relationship between top and first subxact.
Such a transaction won't be streamed anyway because we hadn't seen it in
full. Saying for sure whether xact of some record encountered after
the snapshot was deserialized can be streamed or not requires to know
whether it wrote something before deserialization point --if yes, it
hasn't been seen in full and can't be decoded. Snapshot doesn't have such
info, so there is no easy way to relax the check.
Reported-by: Hsu, John
Diagnosed-by: Arseny Sher
Author: Arseny Sher, Amit Kapila
Reviewed-by: Amit Kapila, Dilip Kumar
Backpatch-through: 9.5
Discussion: https://postgr.es/m/AB5978B2-1772-4FEE-A245-74C91704ECB0@amazon.com
|
|
This was unaccountably omitted in the original RLS patch.
The SQL syntax is basically the same as for comments on triggers,
so crib code from dumpTrigger().
Per report from Marc Munro. Back-patch to all supported branches.
Discussion: https://postgr.es/m/1581889298.18009.15.camel@bloodnok.com
|
|
|
|
|
|
The original coding failed to quote the argument properly.
Reported-by: Daniel Gustafsson
Discussion: 1B8AE66C-85AB-4728-9BB4-612E8E61C219@yesql.se
|
|
Marking an object as dependant on an extension did not have any
privilege check whatsoever; this allowed any user to mark objects as
droppable by anyone able to DROP EXTENSION, which could be used to cause
system-wide havoc. Disallow by checking that the calling user owns the
mentioned object.
(No constraints are placed on the extension.)
Security: CVE-2020-1720
Reported-by: Tom Lane
Discussion: 31605.1566429043@sss.pgh.pa.us
|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 85c682262712155b8026c05a3b09066e85a6af98
|
|
This reverts commit d1c0b61. The patch has some downsides that require
more attention, as discussed with Noah Misch.
Backpatch-through: 9.5
|
|
The previous coding forgot to apply shell quoting to the socket
directory and the data folder, leading to failures when running
pg_upgrade. This refactors the code generating the pg_ctl command
starting clusters to use a more correct shell quoting. Failures are
easier to trigger in 12 and newer versions by using a value of
--socketdir that includes quotes, but it is also possible to cause
failures with quotes included in the default socket directory used by
pg_upgrade or the data folders of the clusters involved in the
upgrade.
As 9.4 is going to be EOL'd with the next minor release, nobody is
likely going to upgrade to it now so this branch is not included in the
set of branches fixed.
Author: Michael Paquier
Reviewed-by: Álvaro Herrera, Noah Misch
Backpatch-through: 9.5
|
|
Commit b10714080 moved the GinPageSetDeleteXid() call to a spot where
the "page" variable was pointing to the wrong page, causing the XID
to be inserted on a page that's not being deleted, thus allowing later
GinPageIsRecyclable tests to recycle the deleted page too soon.
It might be a good idea to stop using the single "page" variable for
multiple purposes in this function. But for the moment I just moved
the GinPageSetDeleteXid() call down beside the GinPageSetDeleted()
call, which seems like a more logical place for it anyway.
Back-patch to v11, as the faulty patch was. (Fortunately, the bug
hasn't made it into any release yet.)
Discussion: https://postgr.es/m/21620.1581098806@sss.pgh.pa.us
|
|
Reported-by: Amit Langote
Author: Amit Langote
Backpatch-through: 9.6, where it was introduced
Discussion: https://postgr.es/m/CA+HiwqFNADeukaaGRmTqANbed9Fd81gLi08AWe_F86_942Gspw@mail.gmail.com
|
|
Previously PostgreSQL built with -DLWLOCK_STATS could report
more than one LWLock statistics entries for the same backend
process and the same LWLock. This is strange and only one
statistics should be output in that case, instead.
The cause of this issue is that the key variable used for
LWLock stats hash table was not fully initialized. The key
consists of two fields and they were initialized. But
the following 4 bytes allocated in the key variable for
the alignment was not initialized. So even if the same key
was specified, hash_search(HASH_ENTER) could not find
the existing entry for that key and created new one.
This commit fixes this issue by initializing the key
variable with zero. As the side effect of this commit,
the volume of LWLock statistics output would be reduced
very much.
Back-patch to v10, where commit 3761fe3c20 introduced the issue.
Author: Fujii Masao
Reviewed-by: Julien Rouhaud, Kyotaro Horiguchi
Discussion: https://postgr.es/m/26359edb-798a-568f-d93a-6aafac49752d@oss.nttdata.com
|
|
Tuple conversion incorrectly concluded that no conversion was needed
as long as all the attributes lined up. But if the source tuple has a
missing attribute (from addition of a column with default), then the
destination tupdesc might not reflect the same default. The typical
symptom was that the affected columns would be unexpectedly NULL.
Repair by always forcing conversion if the source has missing
attributes, which will be filled in by the deform operation. (In
theory we could optimize for when the destination has the same
default, but that seemed overkill.)
Backpatch to 11 where missing attributes were added.
Per bug #16242.
Vik Fearing (discovery, code, testing) and me (analysis, testcase).
Discussion: https://postgr.es/m/16242-d1c9fca28445966b@postgresql.org
|
|
PostgresNode already retained base directories in such cases. Stop
using $SIG{__DIE__}, which is redundant with the exit status check, in
lieu of proliferating it to TestLib. Back-patch to 9.6, where commit
88802e068017bee8cea7a5502a712794e761c7b5 introduced retention on
failure.
Reviewed by Daniel Gustafsson.
Discussion: https://postgr.es/m/20200202170155.GA3264196@rfd.leadboat.com
|
|
Commit 74618e77 added a new check intended to fix a bug, but put
it in the wrong place so that parallel btree build was always
disabled. Do the check after we've actually tried to create
a DSM segment. Back-patch to 11, like the earlier commit.
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/CAH2-WzmDABkJzrNnvf%2BOULK-_A_j9gkYg_Dz-H62jzNv4eKQTw%40mail.gmail.com
|
|
Commit 499be013d added this field in a rather poorly-thought-through
manner, with the result being that rather than being a field of the
Append or MergeAppend plan node as intended (and as it seems to be,
in text format), it was actually an element of the "Plans" subgroup.
At least in JSON format, that's flat out invalid syntax, because
"Plans" is an array not an object.
While it's not hard to move the generation of the field so that it
appears where it's supposed to, this does result in a visible change
in field order in text format, in cases where a Append or MergeAppend
plan node has any InitPlans attached. That's slightly annoying to
do in stable branches; but the alternative of continuing to emit
broken non-text formats seems worse.
Also, since the set of fields emitted is not supposed to be
data-dependent in non-text formats, make sure that "Subplans Removed"
appears in Append and MergeAppend nodes even when it's zero, in those
formats. (The previous coding made it look like it could appear in
some other node types such as BitmapAnd, but we don't actually support
runtime pruning there, so don't emit it in those cases.)
Per bug #16171 from Mahadevan Ramachandran. Fix by Daniel Gustafsson
and Tom Lane, reviewed by Hamid Akhtar. Back-patch to v11 where this
code came in.
Discussion: https://postgr.es/m/16171-b72259ab75505fa2@postgresql.org
|
|
When replica identity is FULL (an admittedly unusual case), the loop
that searches for tuples in execReplication.c didn't stop scanning the
table when once a matching tuple was found. Add the missing 'break'.
Note slight behavior change: we now return the first matching tuple
rather than the last one. They are supposed to be indistinguishable
anyway, so this shouldn't matter.
Author: Konstantin Knizhnik
Discussion: https://postgr.es/m/379743f6-ae91-b866-f7a2-5624e6d2b0a4@postgrespro.ru
|
|
This commit reverts the fix "Make inherited TRUNCATE perform access
permission checks on parent table only" only in the back branches.
It's not hard to imagine that there are some applications expecting
the old behavior and the fix breaks their security. To avoid this
compatibility problem, we decided to apply the fix only in HEAD and
revert it in all supported back branches.
Discussion: https://postgr.es/m/21015.1580400165@sss.pgh.pa.us
|
|
If we attempt to create a DSM segment when no slots are available,
we should return the memory to the operating system. Previously
we did that if the DSM_CREATE_NULL_IF_MAXSEGMENTS flag was
passed in, but we didn't do it if an error was raised. Repair.
Back-patch to 9.4, where DSM segments arrived.
Author: Thomas Munro
Reviewed-by: Robert Haas
Reported-by: Julian Backes
Discussion: https://postgr.es/m/CA%2BhUKGKAAoEw-R4om0d2YM4eqT1eGEi6%3DQot-3ceDR-SLiWVDw%40mail.gmail.com
|
|
Commit fc7695891 changed CheckAttributeType to recurse into ranges,
but made it pass down the wrong collation (always InvalidOid, since
ranges as such have no collation). This would result in guaranteed
failure when considering a range type whose subtype is collatable.
Embarrassingly, we lack any regression tests that would expose such
a problem (but fortunately, somebody noticed before we shipped this
bug in any release).
Fix it to pass down the range's subtype collation property instead,
and add some regression test cases to exercise collatable-subtype
ranges a bit more. Back-patch to all supported branches, as the
previous patch was.
Report and patch by Julien Rouhaud, test cases tweaked by me
Discussion: https://postgr.es/m/CAOBaU_aBWqNweiGUFX0guzBKkcfJ8mnnyyGC_KBQmO12Mj5f_A@mail.gmail.com
|
|
If we failed to fork a worker process, or create a communication pipe
for one, WaitForTerminatingWorkers would suffer an assertion failure
if assert-enabled, otherwise crash or go into an infinite loop. This
was a consequence of not accounting for the startup condition where
we've not yet forked all the workers.
The original bug was that ParallelBackupStart would set workerStatus to
WRKR_IDLE before it had successfully forked a worker. I made things
worse in commit b7b8cc0cf by not understanding the undocumented fact
that the WRKR_TERMINATED state was also meant to represent the case
where a worker hadn't been started yet: I changed enum T_WorkerStatus
so that *all* the worker slots were initially in WRKR_IDLE state. But
this wasn't any more broken in practice, since even one slot in the
wrong state would keep WaitForTerminatingWorkers from terminating.
In v10 and later, introduce an explicit T_WorkerStatus value for
worker-not-started, in hopes of preventing future oversights of the
same ilk. Before that, just document that WRKR_TERMINATED is supposed
to cover that case (partly because it wasn't actively broken, and
partly because the enum is exposed outside parallel.c in those branches,
so there's microscopically more risk involved in changing it).
In all branches, introduce a WORKER_IS_RUNNING status test macro
to hide which T_WorkerStatus values mean that, and be more careful
not to access ParallelSlot fields till we're sure they're valid.
Per report from Vignesh C, though this is my patch not his.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CALDaNm1Luv-E3sarR+-unz-BjchquHHyfP+YC+2FS2pt_J+wxg@mail.gmail.com
|
|
Oversight in commit b0afdca.
|
|
If no DSM slots are available, a ParallelContext can still be
created, but its seg pointer is NULL. Teach parallel btree build
to cope with that by falling back to a regular non-parallel build,
to avoid crashing with a segmentation fault.
Back-patch to 11, where parallel CREATE INDEX landed.
Reported-by: Nicola Contu
Reviewed-by: Peter Geoghegan
Discussion: https://postgr.es/m/CA%2BhUKGJgJEBnkuODBVomyK3MWFvDBbMVj%3Dgdt6DnRPU-5sQ6UQ%40mail.gmail.com
|
|
Previously, TRUNCATE command through a parent table checked the
permissions on not only the parent table but also the children tables
inherited from it. This was a bug and inherited queries should perform
access permission checks on the parent table only. This commit fixes
that bug.
Back-patch to all supported branches.
Author: Amit Langote
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CAHGQGwFHdSvifhJE+-GSNqUHSfbiKxaeQQ7HGcYz6SC2n_oDcg@mail.gmail.com
|
|
Advancing a physical replication slot with pg_replication_slot_advance()
did not mark the slot as dirty if any advancing was done, preventing the
follow-up checkpoint to flush the slot data to disk. This caused the
advancing to be lost even on clean restarts. This does not happen for
logical slots as any advancing marked the slot as dirty. Per
discussion, the original feature has been implemented so as in the event
of a crash the slot may move backwards to a past LSN. This property is
kept and more documentation is added about that.
This commit adds some new TAP tests to check the persistency of physical
and logical slots after advancing across clean restarts.
Author: Alexey Kondratov, Michael Paquier
Reviewed-by: Andres Freund, Kyotaro Horiguchi, Craig Ringer
Discussion: https://postgr.es/m/059cc53a-8b14-653a-a24d-5f867503b0ee@postgrespro.ru
Backpatch-through: 11
|
|
Currently, Parallel Hash Join cannot be used for full/right joins,
so there is no point in setting the match flag. It turns out that
the cache coherence traffic generated by those writes slows down
large systems running many-core joins, so let's stop doing that.
In future, if we need to use match bits in parallel joins, we might
want to consider setting them only if not already set.
Back-patch to 11, where Parallel Hash Join arrived.
Reported-by: Deng, Gang
Discussion: https://postgr.es/m/0F44E799048C4849BAE4B91012DB910462E9897A%40SHSMSX103.ccr.corp.intel.com
|
|
I had supposed that the from_char_seq_search() call sites were
all passing the constant arrays you'd expect them to pass ...
but on looking closer, the one for DY format was passing the
days[] array not days_short[]. This accidentally worked because
the day abbreviations in English are all the same as the first
three letters of the full day names. However, once we took out
the "maximum comparison length" logic, it stopped working.
As penance for that oversight, add regression test cases covering
this, as well as every other switch case in DCH_from_char() that
was not reached according to the code coverage report.
Also, fold the DCH_RM and DCH_rm cases into one --- now that
seq_search is case independent, there's no need to pass different
comparison arrays for those cases.
Back-patch, as the previous commit was.
|
|
seq_search(), which is used to match input substrings to constants
such as month and day names, had a lot of bizarre and unnecessary
behaviors. It was mostly possible to avert our eyes from that before,
but we don't want to duplicate those behaviors in the upcoming patch
to allow recognition of non-English month and day names. So it's time
to clean this up. In particular:
* seq_search scribbled on the input string, which is a pretty dangerous
thing to do, especially in the badly underdocumented way it was done here.
Fortunately the input string is a temporary copy, but that was being made
three subroutine levels away, making it something easy to break
accidentally. The behavior is externally visible nonetheless, in the form
of odd case-folding in error reports about unrecognized month/day names.
The scribbling is evidently being done to save a few calls to pg_tolower,
but that's such a cheap function (at least for ASCII data) that it's
pretty pointless to worry about. In HEAD I switched it to be
pg_ascii_tolower to ensure it is cheap in all cases; but there are corner
cases in Turkish where this'd change behavior, so leave it as pg_tolower
in the back branches.
* seq_search insisted on knowing the case form (all-upper, all-lower,
or initcap) of the constant strings, so that it didn't have to case-fold
them to perform case-insensitive comparisons. This likewise seems like
excessive micro-optimization, given that pg_tolower is certainly very
cheap for ASCII data. It seems unsafe to assume that we know the case
form that will come out of pg_locale.c for localized month/day names, so
it's better just to define the comparison rule as "downcase all strings
before comparing". (The choice between downcasing and upcasing is
arbitrary so far as English is concerned, but it might not be in other
locales, so follow citext's lead here.)
* seq_search also had a parameter that'd cause it to report a match
after a maximum number of characters, even if the constant string were
longer than that. This was not actually used because no caller passed
a value small enough to cut off a comparison. Replicating that behavior
for localized month/day names seems expensive as well as useless, so
let's get rid of that too.
* from_char_seq_search used the maximum-length parameter to truncate
the input string in error reports about not finding a matching name.
This leads to rather confusing reports in many cases. Worse, it is
outright dangerous if the input string isn't all-ASCII, because we
risk truncating the string in the middle of a multibyte character.
That'd lead either to delivering an illegible error message to the
client, or to encoding-conversion failures that obscure the actual
data problem. Get rid of that in favor of truncating at whitespace
if any (a suggestion due to Alvaro Herrera).
In addition to fixing these things, I const-ified the input string
pointers of DCH_from_char and its subroutines, to make sure there
aren't any other scribbling-on-input problems.
The risk of generating a badly-encoded error message seems like
enough of a bug to justify back-patching, so patch all supported
branches.
Discussion: https://postgr.es/m/29432.1579731087@sss.pgh.pa.us
|
|
Attempting to use CREATE INDEX, DROP INDEX or REINDEX with CONCURRENTLY
on a temporary relation with ON COMMIT actions triggered unexpected
errors because those operations use multiple transactions internally to
complete their work. Here is for example one confusing error when using
ON COMMIT DELETE ROWS:
ERROR: index "foo" already contains data
Issues related to temporary relations and concurrent indexing are fixed
in this commit by enforcing the non-concurrent path to be taken for
temporary relations even if using CONCURRENTLY, transparently to the
user. Using a non-concurrent path does not matter in practice as locks
cannot be taken on a temporary relation by a session different than the
one owning the relation, and the non-concurrent operation is more
effective.
The problem exists with REINDEX since v12 with the introduction of
CONCURRENTLY, and with CREATE/DROP INDEX since CONCURRENTLY exists for
those commands. In all supported versions, this caused only confusing
error messages to be generated. Note that with REINDEX, it was also
possible to issue a REINDEX CONCURRENTLY for a temporary relation owned
by a different session, leading to a server crash.
The idea to enforce transparently the non-concurrent code path for
temporary relations comes originally from Andres Freund.
Reported-by: Manuel Rigger
Author: Michael Paquier, Heikki Linnakangas
Reviewed-by: Andres Freund, Álvaro Herrera, Heikki Linnakangas
Discussion: https://postgr.es/m/CA+u7OA6gP7YAeCguyseusYcc=uR8+ypjCcgDDCTzjQ+k6S9ksQ@mail.gmail.com
Backpatch-through: 9.4
|
|
The code checking whether an aggregate transition value needs to be
reparented into the current context has always only compared the
transition return value with the previous transition value by datum,
i.e. without regard for NULLness. This normally works, because when
the transition function returns NULL (via fcinfo->isnull), it'll
return a value that won't be the same as its input value.
But there's no hard requirement that that's the case. And it turns
out, it's possible to hit this case (see discussion or reproducers),
leading to a non-null transition value not being reparented, followed
by a crash caused by that.
Instead of adding another comparison of NULLness, instead have
ExecAggTransReparent() ensure that pergroup->transValue ends up as 0
when the new transition value is NULL. That avoids having to add an
additional branch to the much more common cases of the transition
function returning the old transition value (which is a pointer in
this case), and when the new value is different, but not NULL.
In branches since 69c3936a149, also deduplicate the reparenting code
between the expression evaluation based transitions, and the path for
ordered aggregates.
Reported-By: Teodor Sigaev, Nikita Glukhov
Author: Andres Freund
Discussion: https://postgr.es/m/bd34e930-cfec-ea9b-3827-a8bc50891393@sigaev.ru
Backpatch: 9.4-, this issue has existed since at least 7.4
|
|
This helps integration of extensions with Windows. The following
parameters are changed:
- idle_in_transaction_session_timeout (9.6 and newer versions)
- lock_timeout
- statement_timeout
- track_activities
- track_counts
- track_functions
Author: Pascal Legrand
Reviewed-by: Amit Kamila, Julien Rouhaud, Michael Paquier
Discussion: https://postgr.es/m/1579298868581-0.post@n3.nabble.com
Backpatch-through: 9.4
|
|
sigTermHandler() tried to be careful to invoke only operations that
are safe to do in a signal handler. But for some reason we forgot
that exit(3) is not among those, because it calls atexit handlers
that might do various random things. (pg_dump itself installs no
atexit handlers, but e.g. OpenSSL does.) That led to crashes or
lockups when attempting to terminate a parallel dump or restore
via a signal.
Fix by calling _exit() instead.
Per bug #16199 from Raúl Marín. Back-patch to all supported branches.
Discussion: https://postgr.es/m/16199-cb2f121146a96f9b@postgresql.org
|
|
The BRIN add_value() and union() functions need to make a longer-lived
copy of the argument, if they want to store it in the BrinValues struct
also passed as argument. The functions for the "inclusion operator
classes" used with box, range and inet types didn't take into account
that the union helper function might return its argument as is, without
making a copy. Check for that case, and make a copy if necessary. That
case arises at least with the range_union() function, when one of the
arguments is an 'empty' range:
CREATE TABLE brintest (n numrange);
CREATE INDEX brinidx ON brintest USING brin (n);
INSERT INTO brintest VALUES ('empty');
INSERT INTO brintest VALUES (numrange(0, 2^1000::numeric));
INSERT INTO brintest VALUES ('(-1, 0)');
SELECT brin_desummarize_range('brinidx', 0);
SELECT brin_summarize_range('brinidx', 0);
Backpatch down to 9.5, where BRIN was introduced.
Discussion: https://www.postgresql.org/message-id/e6e1d6eb-0a67-36aa-e779-bcca59167c14%40iki.fi
Reviewed-by: Emre Hasegeli, Tom Lane, Alvaro Herrera
|
