| Age | Commit message (Collapse) | Author |
|---|
|
It turns out that on FreeBSD-derived platforms (including OS X), the
*scanf() family of functions is pretty much brain-dead about multibyte
characters. In particular it will apply isspace() to individual bytes
of input even when those bytes are part of a multibyte character, thus
allowing false recognition of a field-terminating space.
We appear to have little alternative other than instituting a coding
rule that *scanf() is not to be used if the input string might contain
multibyte characters. (There was some discussion of relying on "%ls",
but that probably just moves the portability problem somewhere else,
and besides it doesn't fully prevent BSD *scanf() from using isspace().)
This patch is a down payment on that: it gets rid of use of sscanf()
to parse ispell dictionary files, which are certainly at great risk
of having a problem. The code is cleaner this way anyway, though
a bit longer.
In passing, improve a few comments.
Report and patch by Artur Zakirov, reviewed and somewhat tweaked by me.
Back-patch to all supported branches.
|
|
|
|
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: e640b67db0ef2d766eb6b5ec60dc3ba5ed4e2ede
|
|
Previously, our regex code defined CHR_MAX as 0xfffffffe, which is a
bad choice because it is outside the range of type "celt" (int32).
Characters approaching that limit could lead to infinite loops in logic
such as "for (c = a; c <= b; c++)" where c is of type celt but the
range bounds are chr. Such loops will work safely only if CHR_MAX+1
is representable in celt, since c must advance to beyond b before the
loop will exit.
Fortunately, there seems no reason not to restrict CHR_MAX to 0x7ffffffe.
It's highly unlikely that Unicode will ever assign codes that high, and
none of our other backend encodings need characters beyond that either.
In addition to modifying the macro, we have to explicitly enforce character
range restrictions on the values of \u, \U, and \x escape sequences, else
the limit is trivially bypassed.
Also, the code for expanding case-independent character ranges in bracket
expressions had a potential integer overflow in its calculation of the
number of characters it could generate, which could lead to allocating too
small a character vector and then overwriting memory. An attacker with the
ability to supply arbitrary regex patterns could easily cause transient DOS
via server crashes, and the possibility for privilege escalation has not
been ruled out.
Quite aside from the integer-overflow problem, the range expansion code was
unnecessarily inefficient in that it always produced a result consisting of
individual characters, abandoning the knowledge that we had a range to
start with. If the input range is large, this requires excessive memory.
Change it so that the original range is reported as-is, and then we add on
any case-equivalent characters that are outside that range. With this
approach, we can bound the number of individual characters allowed without
sacrificing much. This patch allows at most 100000 individual characters,
which I believe to be more than the number of case pairs existing in
Unicode, so that the restriction will never be hit in practice.
It's still possible for range() to take awhile given a large character code
range, so also add statement-cancel detection to its loop. The downstream
function dovec() also lacked cancel detection, and could take a long time
given a large output from range().
Per fuzz testing by Greg Stark. Back-patch to all supported branches.
Security: CVE-2016-0773
|
|
Future PL/Java versions will close CVE-2016-0766 by making these GUCs
PGC_SUSET. This PostgreSQL change independently mitigates that PL/Java
vulnerability, helping sites that update PostgreSQL more frequently than
PL/Java. Back-patch to 9.1 (all supported versions).
|
|
DST law changes in Cayman Islands, Metlakatla, Trans-Baikal Territory
(Zabaykalsky Krai). Historical corrections for Pakistan.
|
|
If a view is split into CREATE TABLE + CREATE RULE to break a circular
dependency, then any triggers on the view must be dumped/reloaded after
the CREATE RULE; else the backend may reject the CREATE TRIGGER because
it's the wrong type of trigger for a plain table. This works all right
in plain dump/restore because of pg_dump's sorting heuristic that places
triggers after rules. However, when using parallel restore, the ordering
must be enforced by a dependency --- and we didn't have one.
Fixing this is a mere matter of adding an addObjectDependency() call,
except that we need to be able to find all the triggers belonging to the
view relation, and there was no easy way to do that. Add fields to
pg_dump's TableInfo struct to remember where the associated TriggerInfo
struct(s) are.
Per bug report from Dennis Kögel. The failure can be exhibited at least
as far back as 9.1, so back-patch to all supported branches.
|
|
which is a preprocessor directive. This leads ecpg to incorrectly parse the comment as nested.
|
|
listForeignTables' invocation of processSQLNamePattern did not match up
with the other ones that handle potentially-schema-qualified names; it
failed to make use of pg_table_is_visible() and also passed the name
arguments in the wrong order. Bug seems to have been aboriginal in commit
0d692a0dc9f0e532. It accidentally sort of worked as long as you didn't
inquire too closely into the behavior, although the silliness was later
exposed by inconsistencies in the test queries added by 59efda3e50ca4de6
(which I probably should have questioned at the time, but didn't).
Per bug #13899 from Reece Hart. Patch by Reece Hart and Tom Lane.
Back-patch to all affected branches.
|
|
We entirely randomly chose to initialize port->remote_host just after
printing the log_connections message, when we could perfectly well do it
just before, allowing %h and %r to work for that message. Per gripe from
Artem Tomyuk.
|
|
This will enable PL/Java to be cleanly compiled, as dynloader.h is a
requirement.
Report by Chapman Flack
Patch by Michael Paquier
Backpatch through 9.1
|
|
We can never leak more than one token, but we shouldn't do that. We
don't bother closing it in the error paths since the process will
exit shortly anyway.
Christian Ullrich
|
|
pg_dump's original approach to handling extension member objects was to
run around and clear (or set) their dump flags rather late in its data
collection process. Unfortunately, quite a lot of code expects those flags
to be valid before that; which was an entirely reasonable expectation
before we added extensions. In particular, this explains Karsten Hilbert's
recent report of pg_upgrade failing on a database in which an extension
has been installed into the pg_catalog schema. Its objects are initially
marked as not-to-be-dumped on the strength of their schema, and later we
change them to must-dump because we're doing a binary upgrade of their
extension; but we've already skipped essential tasks like making associated
DO_SHELL_TYPE objects.
To fix, collect extension membership data first, and incorporate it in the
initial setting of the dump flags, so that those are once again correct
from the get-go. This has the undesirable side effect of slightly
lengthening the time taken before pg_dump acquires table locks, but testing
suggests that the increase in that window is not very much.
Along the way, get rid of ugly special-case logic for deciding whether
to dump procedural languages, FDWs, and foreign servers; dump decisions
for those are now correct up-front, too.
In 9.3 and up, this also fixes erroneous logic about when to dump event
triggers (basically, they were *always* dumped before). In 9.5 and up,
transform objects had that problem too.
Since this problem came in with extensions, back-patch to all supported
versions.
|
|
Commit 803716013dc1350f installed a safeguard against loading plpython2
and plpython3 at the same time, but asserted that both could still be
used in the same database, just not in the same session. However, that's
not actually all that practical because dumping and reloading will fail
(since both libraries necessarily get loaded into the restoring session).
pg_upgrade is even worse, because it checks for missing libraries by
loading every .so library mentioned in the entire installation into one
session, so that you can have only one across the whole cluster.
We can improve matters by not throwing the error immediately in _PG_init,
but only when and if we're asked to do something that requires calling
into libpython. This ameliorates both of the above situations, since
while execution of CREATE LANGUAGE, CREATE FUNCTION, etc will result in
loading plpython, it isn't asked to do anything interesting (at least
not if check_function_bodies is off, as it will be during a restore).
It's possible that this opens some corner-case holes in which a crash
could be provoked with sufficient effort. However, since plpython
only exists as an untrusted language, any such crash would require
superuser privileges, making it "don't do that" not a security issue.
To reduce the hazards in this area, the error is still FATAL when it
does get thrown.
Per a report from Paul Jones. Back-patch to 9.2, which is as far back
as the patch applies without work. (It could be made to work in 9.1,
but given the lack of previous complaints, I'm disinclined to expend
effort so far back. We've been pretty desultory about support for
Python 3 in 9.1 anyway.)
|
|
A scan for missed proisstrict markings in the core code turned up
these functions:
brin_summarize_new_values
pg_stat_reset_single_table_counters
pg_stat_reset_single_function_counters
pg_create_logical_replication_slot
pg_create_physical_replication_slot
pg_drop_replication_slot
The first three of these take OID, so a null argument will normally look
like a zero to them, resulting in "ERROR: could not open relation with OID
0" for brin_summarize_new_values, and no action for the pg_stat_reset_XXX
functions. The other three will dump core on a null argument, though this
is mitigated by the fact that they won't do so until after checking that
the caller is superuser or has rolreplication privilege.
In addition, the pg_logical_slot_get/peek[_binary]_changes family was
intentionally marked nonstrict, but failed to make nullness checks on all
the arguments; so again a null-pointer-dereference crash is possible but
only for superusers and rolreplication users.
Add the missing ARGISNULL checks to the latter functions, and mark the
former functions as strict in pg_proc. Make that change in the back
branches too, even though we can't force initdb there, just so that
installations initdb'd in future won't have the issue. Since none of these
bugs rise to the level of security issues (and indeed the pg_stat_reset_XXX
functions hardly misbehave at all), it seems sufficient to do this.
In addition, fix some order-of-operations oddities in the slot_get_changes
family, mostly cosmetic, but not the part that moves the function's last
few operations into the PG_TRY block. As it stood, there was significant
risk for an error to exit without clearing historical information from
the system caches.
The slot_get_changes bugs go back to 9.4 where that code was introduced.
Back-patch appropriate subsets of the pg_proc changes into all active
branches, as well.
|
|
Given syntactically wrong input, widget_in() could call atof() with an
indeterminate pointer argument, typically leading to a crash; or if it
didn't do that, it might return a NULL pointer, which again would lead
to a crash since old-style C functions aren't supposed to do things
that way. Fix that by correcting the off-by-one syntax test and
throwing a proper error rather than just returning NULL.
Also, since widget_in and widget_out have been marked STRICT for a
long time, their tests for null inputs are just dead code; remove 'em.
In the oldest branches, also improve widget_out to use snprintf not
sprintf, just to be sure.
In passing, get rid of a long-since-useless sprintf into a local buffer
that nothing further is done with, and make some other minor coding
style cleanups.
In the intended regression-testing usage of these functions, none of
this is very significant; but if the regression test database were
left around in a production installation, these bugs could amount
to a minor security hazard.
Piotr Stefaniak, Michael Paquier, and Tom Lane
|
|
These functions readily crash when passed a NULL input value. The tests
themselves do not pass NULL values to them; but when the regression
database is used as a basis for fuzz testing, they cause a lot of noise.
Also, if someone were to leave a regression database lying about in a
production installation, these would create a minor security hazard.
Andreas Seltenreich
|
|
Turns out the only reason initdb -X worked is that pg_mkdir_p won't
whine if you point it at something that's a symlink to a directory.
Otherwise, the attempt to create pg_xlog/ just like all the other
subdirectories would have failed. Let's be a little more explicit
about what's happening. Oversight in my patch for bug #13853
(mea culpa for not testing -X ...)
|
|
When we're creating subdirectories of PGDATA during initdb, we know darn
well that the parent directory exists (or should exist) and that the new
subdirectory doesn't (or shouldn't). There is therefore no need to use
anything more complicated than mkdir(). Using pg_mkdir_p() just opens us
up to unexpected failure modes, such as the one exhibited in bug #13853
from Nuri Boardman. It's not very clear why pg_mkdir_p() went wrong there,
but it is clear that we didn't need to be trying to create parent
directories in the first place. We're not even saving any code, as proven
by the fact that this patch nets out at minus five lines.
Since this is a response to a field bug report, back-patch to all branches.
|
|
pg_ctl is using isatty() to verify whether the process is running in a
terminal, and if not it sends its output to Windows' Event Log ... which
does the wrong thing when the output has been redirected to a pipe, as
reported in bug #13592.
To fix, make pg_ctl use the code we already have to detect service-ness:
in the master branch, move src/backend/port/win32/security.c to src/port
(with suitable tweaks so that it runs properly in backend and frontend
environments); pg_ctl already has access to pgport so it Just Works. In
older branches, that's likely to cause trouble, so instead duplicate the
required code in pg_ctl.c.
Author: Michael Paquier
Bug report and diagnosis: Egon Kocjan
Backpatch: all supported branches
|
|
pgwin32_recv() has treated a non-error return of zero bytes from WSARecv()
as being a reason to block ever since the current implementation was
introduced in commit a4c40f140d23cefb. However, so far as one can tell
from Microsoft's documentation, that is just wrong: what it means is
graceful connection closure (in stream protocols) or receipt of a
zero-length message (in message protocols), and neither case should result
in blocking here. The only reason the code worked at all was that control
then fell into the retry loop, which did *not* treat zero bytes specially,
so we'd get out after only wasting some cycles. But as of 9.5 we do not
normally reach the retry loop and so the bug is exposed, as reported by
Shay Rojansky and diagnosed by Andres Freund.
Remove the unnecessary test on the byte count, and rearrange the code
in the retry loop so that it looks identical to the initial sequence.
Back-patch of commit 90e61df8130dc7051a108ada1219fb0680cb3eb6. The
original plan was to apply this only to 9.5 and up, but after discussion
and buildfarm testing, it seems better to back-patch. The noblock code
path has been at risk of this problem since it was introduced (in 9.0);
if it did happen in pre-9.5 branches, the symptom would be that a walsender
would wait indefinitely rather than noticing a loss of connection. While
we lack proof that the case has been seen in the field, it seems possible
that it's happened without being reported.
|
|
Commit c7e27becd2e6eb93 fixed this on the backend side, but we neglected
the fact that several code paths in pg_dump were printing reloptions
values that had not gotten massaged by ruleutils. Apply essentially the
same quoting logic in those places, too.
|
|
spg_text_inner_consistent is capable of reconstructing an empty string
to pass down to the next index level; this happens if we have an empty
string coming in, no prefix, and a dummy node label. (In practice, what
is needed to trigger that is insertion of a whole bunch of empty-string
values.) Then, we will arrive at the next level with in->level == 0
and a non-NULL (but zero length) in->reconstructedValue, which is valid
but the Assert tests weren't expecting it.
Per report from Andreas Seltenreich. This has no impact in non-Assert
builds, so should not be a problem in production, but back-patch to
all affected branches anyway.
In passing, remove a couple of useless variable initializations and
shorten the code by not duplicating DatumGetPointer() calls.
|
|
flatten_reloptions() supposed that it didn't really need to do anything
beyond inserting commas between reloption array elements. However, in
principle the value of a reloption could be nearly anything, since the
grammar allows a quoted string there. Any restrictions on it would come
from validity checking appropriate to the particular option, if any.
A reloption value that isn't a simple identifier or number could thus lead
to dump/reload failures due to syntax errors in CREATE statements issued
by pg_dump. We've gotten away with not worrying about this so far with
the core-supported reloptions, but extensions might allow reloption values
that cause trouble, as in bug #13840 from Kouhei Sutou.
To fix, split the reloption array elements explicitly, and then convert
any value that doesn't look like a safe identifier to a string literal.
(The details of the quoting rule could be debated, but this way is safe
and requires little code.) While we're at it, also quote reloption names
if they're not safe identifiers; that may not be a likely problem in the
field, but we might as well try to be bulletproof here.
It's been like this for a long time, so back-patch to all supported
branches.
Kouhei Sutou, adjusted some by me
|
|
A report from Andy Colson showed that gincostestimate() was not being
nearly paranoid enough about whether to believe the statistics it finds in
the index metapage. The problem is that the metapage stats (other than the
pending-pages count) are only updated by VACUUM, and in the worst case
could still reflect the index's original empty state even when it has grown
to many entries. We attempted to deal with that by scaling up the stats to
match the current index size, but if nEntries is zero then scaling it up
still gives zero. Moreover, the proportion of pages that are entry pages
vs. data pages vs. pending pages is unlikely to be estimated very well by
scaling if the index is now orders of magnitude larger than before.
We can improve matters by expanding the use of the rule-of-thumb estimates
I introduced in commit 7fb008c5ee59b040: if the index has grown by more
than a cutoff amount (here set at 4X growth) since VACUUM, then use the
rule-of-thumb numbers instead of scaling. This might not be exactly right
but it seems much less likely to produce insane estimates.
I also improved both the scaling estimate and the rule-of-thumb estimate
to account for numPendingPages, since it's reasonable to expect that that
is accurate in any case, and certainly pages that are in the pending list
are not either entry or data pages.
As a somewhat separate issue, adjust the estimation equations that are
concerned with extra fetches for partial-match searches. These equations
suppose that a fraction partialEntries / numEntries of the entry and data
pages will be visited as a consequence of a partial-match search. Now,
it's physically impossible for that fraction to exceed one, but our
estimate of partialEntries is mostly bunk, and our estimate of numEntries
isn't exactly gospel either, so we could arrive at a silly value. In the
example presented by Andy we were coming out with a value of 100, leading
to insane cost estimates. Clamp the fraction to one to avoid that.
Like the previous patch, back-patch to all supported branches; this
problem can be demonstrated in one form or another in all of them.
|
|
For some reason, we've been overlooking the fact that pg_receivexlog
and pg_recvlogical are using wrong translation domains all along,
so their output hasn't ever been translated. The right domain is
pg_basebackup, not their own executable names.
Noticed by Ioseph Kim, who's been working on the Korean translation.
Backpatch pg_receivexlog to 9.2 and pg_recvlogical to 9.4.
|
|
This is necessary so that REASSIGN OWNED does the right thing with
composite types, to wit, that it also alters ownership of the type's
pg_class entry -- previously, the pg_class entry remained owned by the
original user, which caused later other failures such as the new owner's
inability to use ALTER TYPE to rename an attribute of the affected
composite. Also, if the original owner is later dropped, the pg_class
entry becomes owned by a non-existant user which is bogus.
To fix, create a new routine AlterTypeOwner_oid which knows whether to
pass the request to ATExecChangeOwner or deal with it directly, and use
that in shdepReassignOwner rather than calling AlterTypeOwnerInternal
directly. AlterTypeOwnerInternal is now simpler in that it only
modifies the pg_type entry and recurses to handle a possible array type;
higher-level tasks are handled by either AlterTypeOwner directly or
AlterTypeOwner_oid.
I took the opportunity to add a few more objects to the test rig for
REASSIGN OWNED, so that more cases are exercised. Additional ones could
be added for superuser-only-ownable objects (such as FDWs and event
triggers) but I didn't want to push my luck by adding a new superuser to
the tests on a backpatchable bug fix.
Per bug #13666 reported by Chris Pacejo.
This is a backpatch of commit 756e7b4c9db1 to branches 9.1 -- 9.4.
|
|
|
|
When REASSIGN and ALTER OWNER TO are used, both the object owner and ACL
list should be changed from the old owner to the new owner. This patch
fixes types, foreign data wrappers, and foreign servers to change their
ACL list properly; they already changed owners properly.
Report by Alexey Bashtanov
This is a backpatch of commit 59367fdf97c (for bug #9923) by Bruce
Momjian to branches 9.1 - 9.4; it wasn't backpatched originally out of
concerns that it would create a backwards compatibility problem, but per
discussion related to bug #13666 that turns out to have been misguided.
(Therefore, the entry in the 9.5 release notes should be removed.)
Note that 9.1 didn't have privileges on types (which were introduced by
commit 729205571e81), so this commit only changes foreign-data related
objects in that branch.
Discussion: http://www.postgresql.org/message-id/20151216224004.GL2618@alvherre.pgsql
http://www.postgresql.org/message-id/10227.1450373793@sss.pgh.pa.us
|
|
psql offered USING, WHERE, and SET in this context, but SET is not a valid
possibility here. Seems to have been a thinko in commit f5ab0a14ea83eb6c
which added DELETE's USING option.
|
|
Turns out we must set rl_basic_word_break_characters *before* we call
rl_initialize() the first time, because it will quietly copy that value
elsewhere --- but only on the first call. (Love these undocumented
dependencies.) I broke this yesterday in commit 2ec477dc8108339d;
like that commit, back-patch to all active branches. Per report from
Pavel Stehule.
|
|
It emerges that libreadline doesn't notice terminal window size change
events unless they occur while collecting input. This is easy to stumble
over if you resize the window while using a pager to look at query output,
but it can be demonstrated without any pager involvement. The symptom is
that queries exceeding one line are misdisplayed during subsequent input
cycles, because libreadline has the wrong idea of the screen dimensions.
The safest, simplest way to fix this is to call rl_reset_screen_size()
just before calling readline(). That causes an extra ioctl(TIOCGWINSZ)
for every command; but since it only happens when reading from a tty, the
performance impact should be negligible. A more valid objection is that
this still leaves a tiny window during entry to readline() wherein delivery
of SIGWINCH will be missed; but the practical consequences of that are
probably negligible. In any case, there doesn't seem to be any good way to
avoid the race, since readline exposes no functions that seem safe to call
from a generic signal handler --- rl_reset_screen_size() certainly isn't.
It turns out that we also need an explicit rl_initialize() call, else
rl_reset_screen_size() dumps core when called before the first readline()
call.
rl_reset_screen_size() is not present in old versions of libreadline,
so we need a configure test for that. (rl_initialize() is present at
least back to readline 4.0, so we won't bother with a test for it.)
We would need a configure test anyway since libedit's emulation of
libreadline doesn't currently include such a function. Fortunately,
libedit seems not to have any corresponding bug.
Merlin Moncure, adjusted a bit by me
|
|
Apparently, there are bugs in this code that cause it to loop endlessly.
That bug still needs more research, but in the meantime it's clear that
the loop is missing a check for interrupts so that it can be cancelled
timely.
Backpatch to 9.1 -- this has been missing since 49475aab8d0d.
|
|
If libpq ran out of memory while constructing the result set, it would hang,
waiting for more data from the server, which might never arrive. To fix,
distinguish between out-of-memory error and not-enough-data cases, and give
a proper error message back to the client on OOM.
There are still similar issues in handling COPY start messages, but let's
handle that as a separate patch.
Michael Paquier, Amit Kapila and me. Backpatch to all supported versions.
|
|
e3f4cfc7 introduced a LWLockHeldByMe() call, without the corresponding
Assert() surrounding it.
Spotted by Coverity.
Backpatch: 9.1+, like the previous commit
|
|
Changing the tablespace of an unlogged relation did not WAL log the
creation and content of the init fork. Thus, after a standby is
promoted, unlogged relation cannot be accessed anymore, with errors
like:
ERROR: 58P01: could not open file "pg_tblspc/...": No such file or directory
Additionally the init fork was not synced to disk, independent of the
configured wal_level, a relatively small durability risk.
Investigation of that problem also brought to light that, even for
permanent relations, the creation of !main forks was not WAL logged,
i.e. no XLOG_SMGR_CREATE record were emitted. That mostly turns out not
to be a problem, because these files were created when the actual
relation data is copied; nonexistent files are not treated as an error
condition during replay. But that doesn't work for empty files, and
generally feels a bit haphazard. Luckily, outside init and main forks,
empty forks don't occur often or are not a problem.
Add the required WAL logging and syncing to disk.
Reported-By: Michael Paquier
Author: Michael Paquier and Andres Freund
Discussion: 20151210163230.GA11331@alap3.anarazel.de
Backpatch: 9.1, where unlogged relations were introduced
|
|
Recent releases of libxml2 do not provide error context reports for errors
detected at the very end of the input string. This appears to be a bug, or
at least an infelicity, introduced by the fix for libxml2's CVE-2015-7499.
We can hope that this behavioral change will get undone before too long;
but the security patch is likely to spread a lot faster/further than any
follow-on cleanup, which means this behavior is likely to be present in the
wild for some time to come. As a stopgap, add a variant regression test
expected-file that matches what you get with a libxml2 that acts this way.
|
|
As reported in bug #13809 by Alexander Ashurkov, the code for REASSIGN
OWNED hadn't gotten word about user mappings. Deal with them in the
same way default ACLs do, which is to ignore them altogether; they are
handled just fine by DROP OWNED. The other foreign object cases are
already handled correctly by both commands.
Also add a REASSIGN OWNED statement to foreign_data test to exercise the
foreign data objects. (The changes are just before the "cleanup" phase,
so it shouldn't remove any existing live test.)
Reported by Alexander Ashurkov, then independently by Jaime Casanova.
|
|
At the end of crash recovery, unlogged relations are reset to the empty
state, using their init fork as the template. The init fork is copied to
the main fork without going through shared buffers. Unfortunately WAL
replay so far has not necessarily flushed writes from shared buffers to
disk at that point. In normal crash recovery, and before the
introduction of 'fast promotions' in fd4ced523 / 9.3, the
END_OF_RECOVERY checkpoint flushes the buffers out in time. But with
fast promotions that's not the case anymore.
To fix, force WAL writes targeting the init fork to be flushed
immediately (using the new FlushOneBuffer() function). In 9.5+ that
flush can centrally be triggered from the code dealing with restoring
full page writes (XLogReadBufferForRedoExtended), in earlier releases
that responsibility is in the hands of XLOG_HEAP_NEWPAGE's replay
function.
Backpatch to 9.1, even if this currently is only known to trigger in
9.3+. Flushing earlier is more robust, and it is advantageous to keep
the branches similar.
Typical symptoms of this bug are errors like
'ERROR: index "..." contains unexpected zero page at block 0'
shortly after promoting a node.
Reported-By: Thom Brown
Author: Andres Freund and Michael Paquier
Discussion: 20150326175024.GJ451@alap3.anarazel.de
Backpatch: 9.1-
|
|
Commit 32f15d05c fixed this in configure, but missed the similar check
in the MSVC scripts.
Michael Paquier, per report from Victor Wagner
|
|
We tried to fetch statistics data from the index metapage, which does not
work if the index isn't actually present. If the index is hypothetical,
instead extrapolate some plausible internal statistics based on the index
page count provided by the index-advisor plugin.
There was already some code in gincostestimate() to invent internal stats
in this way, but since it was only meant as a stopgap for pre-9.1 GIN
indexes that hadn't been vacuumed since upgrading, it was pretty crude.
If we want it to support index advisors, we should try a little harder.
A small amount of testing says that it's better to estimate the entry pages
as 90% of the index, not 100%. Also, estimating the number of entries
(keys) as equal to the heap tuple count could be wildly wrong in either
direction. Instead, let's estimate 100 entries per entry page.
Perhaps someday somebody will want the index advisor to be able to provide
these numbers more directly, but for the moment this should serve.
Problem report and initial patch by Julien Rouhaud; modified by me to
invent less-bogus internal statistics. Back-patch to all supported
branches, since we've supported index advisors since 9.0.
|
|
The previous coding could overrun the provided buffer size for a very large
input, or lose precision for a very small input. Adopt the methodology
that's been in use in the equivalent backend code for a long time.
Per private report from Bas van Schaik. Back-patch to all supported
branches.
|
|
Failure to initially palloc the comboCids array, or to realloc it bigger
when needed, left combocid's data structures in an inconsistent state that
would cause trouble if the top transaction continues to execute. Noted
while examining a user complaint about the amount of memory used for this.
(There's not much we can do about that, but it does point up that repalloc
failure has a non-negligible chance of occurring here.)
In HEAD/9.5, also avoid possible invocation of memcpy() with a null pointer
in SerializeComboCIDState; cf commit 13bba0227.
|
|
PQhost() can return NULL in non-error situations, namely when a Unix-socket
connection has been selected by default. That behavior is a tad debatable
perhaps, but for the moment we should make sure that psql copes with it.
Unfortunately, do_connect() failed to: it could pass a NULL pointer to
strcmp(), resulting in crashes on most platforms. This was reported as a
security issue by ChenQin of Topsec Security Team, but the consensus of
the security list is that it's just a garden-variety bug with no security
implications.
For paranoia's sake, I made the keep_password test not trust PQuser or
PQport either, even though I believe those will never return NULL given
a valid PGconn.
Back-patch to all supported branches.
|
|
I missed adding src/port/tar.c to the Windows build files when
back-patching the addition of that file to 9.2 and 9.1.
Per buildfarm.
|
|
The POSIX standard for tar headers requires archive member sizes to be
printed in octal with at most 11 digits, limiting the representable file
size to 8GB. However, GNU tar and apparently most other modern tars
support a convention in which oversized values can be stored in base-256,
allowing any practical file to be a tar member. Adopt this convention
to remove two limitations:
* pg_dump with -Ft output format failed if the contents of any one table
exceeded 8GB.
* pg_basebackup failed if the data directory contained any file exceeding
8GB. (This would be a fatal problem for installations configured with a
table segment size of 8GB or more, and it has also been seen to fail when
large core dump files exist in the data directory.)
File sizes under 8GB are still printed in octal, so that no compatibility
issues are created except in cases that would have failed entirely before.
In addition, this patch fixes several bugs in the same area:
* In 9.3 and later, we'd defined tarCreateHeader's file-size argument as
size_t, which meant that on 32-bit machines it would write a corrupt tar
header for file sizes between 4GB and 8GB, even though no error was raised.
This broke both "pg_dump -Ft" and pg_basebackup for such cases.
* pg_restore from a tar archive would fail on tables of size between 4GB
and 8GB, on machines where either "size_t" or "unsigned long" is 32 bits.
This happened even with an archive file not affected by the previous bug.
* pg_basebackup would fail if there were files of size between 4GB and 8GB,
even on 64-bit machines.
* In 9.3 and later, "pg_basebackup -Ft" failed entirely, for any file size,
on 64-bit big-endian machines.
In view of these potential data-loss bugs, back-patch to all supported
branches, even though removal of the documented 8GB limit might otherwise
be considered a new feature rather than a bug fix.
|
|
The previous way of reconstructing check constraints was to do a separate
"ALTER TABLE ONLY tab ADD CONSTRAINT" for each table in an inheritance
hierarchy. However, that way has no hope of reconstructing the check
constraints' own inheritance properties correctly, as pointed out in
bug #13779 from Jan Dirk Zijlstra. What we should do instead is to do
a regular "ALTER TABLE", allowing recursion, at the topmost table that
has a particular constraint, and then suppress the work queue entries
for inherited instances of the constraint.
Annoyingly, we'd tried to fix this behavior before, in commit 5ed6546cf,
but we failed to notice that it wasn't reconstructing the pg_constraint
field values correctly.
As long as I'm touching pg_get_constraintdef_worker anyway, tweak it to
always schema-qualify the target table name; this seems like useful backup
to the protections installed by commit 5f173040.
In HEAD/9.5, get rid of get_constraint_relation_oids, which is now unused.
(I could alternatively have modified it to also return conislocal, but that
seemed like a pretty single-purpose API, so let's not pretend it has some
other use.) It's unused in the back branches as well, but I left it in
place just in case some third-party code has decided to use it.
In HEAD/9.5, also rename pg_get_constraintdef_string to
pg_get_constraintdef_command, as the previous name did nothing to explain
what that entry point did differently from others (and its comment was
equally useless). Again, that change doesn't seem like material for
back-patching.
I did a bit of re-pgindenting in tablecmds.c in HEAD/9.5, as well.
Otherwise, back-patch to all supported branches.
|
|
div_var_fast() postpones propagating carries in the same way as mul_var(),
so it has the same corner-case overflow risk we fixed in 246693e5ae8a36f0,
namely that the size of the carries has to be accounted for when setting
the threshold for executing a carry propagation step. We've not devised
a test case illustrating the brokenness, but the required fix seems clear
enough. Like the previous fix, back-patch to all active branches.
Dean Rasheed
|
|
Normally ruleutils prints a whole-row Var as "foo.*". We already knew that
that doesn't work at top level of a SELECT list, because the parser would
treat the "*" as a directive to expand the reference into separate columns,
not a whole-row Var. However, Joshua Yanovski points out in bug #13776
that the same thing happens at top level of a ROW() construct; and some
nosing around in the parser shows that the same is true in VALUES().
Hence, apply the same workaround already devised for the SELECT-list case,
namely to add a forced cast to the appropriate rowtype in these cases.
(The alternative of just printing "foo" was rejected because it is
difficult to avoid ambiguity against plain columns named "foo".)
Back-patch to all supported branches.
|
|
The error message wording for AttributeError has changed in Python 3.5.
For the plpython_error test, add a new expected file. In the
plpython_subtransaction test, we didn't really care what the exception
is, only that it is something coming from Python. So use a generic
exception instead, which has a message that doesn't vary across
versions.
|
