| Age | Commit message (Collapse) | Author |
|---|
|
Reviewed-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/0151ad01239e2cc7b3139644358cf8f7b9622ff7.camel@j-davis.com
|
|
This removes a few static functions and replaces them with 2 functions
which aim to be more reusable. The upper planner's pathkey requirements
can be simplified down to operations which require pathkeys in the same
order as the pathkeys for the given operation, and operations which can
make use of a Path's pathkeys in any order.
Here we also add some short-circuiting to truncate_useless_pathkeys(). At
any point we discover that all pathkeys are useful to a single operation,
we can stop checking the remaining operations as we're not going to be
able to find any further useful pathkeys - they're all possibly useful
already. Adjusting this seems to warrant trying to put the checks
roughly in order of least-expensive-first so that the short-circuits
have the most chance of skipping the more expensive checks.
In passing clean up has_useful_pathkeys() as it seems to have grown a
redundant check for group_pathkeys. This isn't needed as
standard_qp_callback will set query_pathkeys if there's any requirement
to have group_pathkeys. All this code does is waste run-time effort and
take up needless space.
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Richard Guo <guofenglinux@gmail.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://postgr.es/m/CAApHDvpbsEoTksvW5901MMoZo-hHf78E5up3uDOfkJnxDe_WAw@mail.gmail.com
|
|
It is possible to have a non-inherited not-null constraint on an
inherited column, but we were failing to preserve such constraints
during pg_upgrade where the source is 17 or older, because of a bug in
the pg_dump query for it. Oversight in commit 14e87ffa5c54. Fix that
query. In passing, touch-up a bogus nearby comment introduced by the
same commit.
In version 17, make the regression tests leave a table in this
situation, so that this scenario is tested in the cross-version upgrade
tests of 18 and up.
Author: Dilip Kumar <dilipbalaut@gmail.com>
Reported-by: Andrew Bille <andrewbille@gmail.com>
Bug: #19074
Backpatch-through: 18
Discussion: https://postgr.es/m/19074-ae2548458cf0195c@postgresql.org
|
|
Apparently, commit 04bc2c42f765 failed to notice that DO_FK_CONSTRAINT
objects require identical handling as DO_CONSTRAINT ones, which causes
some pg_upgrade tests in debug builds to fail spuriously. Add that.
Author: Álvaro Herrera <alvherre@kurilemu.de>
Backpatch-through: 13
Discussion: https://postgr.es/m/202510181201.k6y75v2tpf5r@alvherre.pgsql
|
|
This fixes an unlikely issue when fetching GROUPING SET results from
their internally stored hash tables. It was possible in rare cases that
the hash iterator would be set up incorrectly which could result in a
crash.
This was introduced in 4d143509c, so backpatch to v18.
Many thanks to Yuri Zamyatin for reporting and helping to debug this
issue.
Bug: #19078
Reported-by: Yuri Zamyatin <yuri@yrz.am>
Author: David Rowley <dgrowleyml@gmail.com>
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/19078-dfd62f840a2c0766@postgresql.org
Backpatch-through: 18
|
|
Switch to using the English word here rather than using a verbified
function name.
The full word still fits within a single comment line, so it's probably
better just to use that instead of trying to shorten it, which might
cause confusion.
Author: Rafia Sabih <rafia.pghackers@gmail.com>
Discussion: https://postgr.es/m/CA+FpmFe7LnRF2NA_QfARjkSWme4mNt+Udwbh2Yb=zZm35Ji31w@mail.gmail.com
|
|
Commit a1b4f289beec improved the hashjoin sizing to also consider the
memory used by BufFiles for batches. The code however had multiple
issues, making it ineffective or not working as expected in some cases.
* The amount of memory needed by buffers was calculated using uint32,
so it would overflow for nbatch >= 262144. If this happened the loop
would exit prematurely and the memory usage would not be reduced.
The nbatch overflow is fixed by reworking the condition to not use a
multiplication at all, so there's no risk of overflow. An explicit
cast was added to a similar calculation in ExecHashIncreaseBatchSize.
* The loop adjusting the nbatch value used hash_table_bytes to calculate
the old/new size, but then updated only space_allowed. The consequence
is the total memory usage was not reduced, but all the memory saved by
reducing the number of batches was used for the internal hash table.
This was fixed by using only space_allowed. This is also more correct,
because hash_table_bytes does not account for skew buckets.
* The code was also doubling multiple parameters (e.g. the number of
buckets for hash table), but was missing overflow protections.
The loop now checks for overflow, and terminates if needed. It'd be
possible to cap the value and continue the loop, but it's not worth
the complexity. And the overflow implies the in-memory hash table is
already very large anyway.
While at it, rework the comment explaining how the memory balancing
works, to make it more concise and easier to understand.
The initial nbatch overflow issue was reported by Vaibhav Jain. The
other issues were noticed by me and Melanie Plageman. Fix by me, with a
lot of review and feedback by Melanie.
Backpatch to 18, where the hashjoin memory balancing was introduced.
Reported-by: Vaibhav Jain <jainva@google.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Backpatch-through: 18
Discussion: https://postgr.es/m/CABa-Az174YvfFq7rLS+VNKaQyg7inA2exvPWmPWqnEn6Ditr_Q@mail.gmail.com
|
|
Author: Mikhail Gribkov <youzhick@gmail.com>
Reviewed-by: Nazir Bilal Yavuz <byavuz81@gmail.com>
Discussion: https://postgr.es/m/CAMEv5_sxuaiAfSy1ZyN%3D7UGbHg3C10cwHhEk8nXEjiCsBVs4vQ%40mail.gmail.com
|
|
Transpose the changes made by commit fabb33b35 in 002_pg_dump.pl
into its recently-created clone 006_pg_dump_compress.pl.
|
|
The SSL tests for pg_stat_ssl tries to exactly match the serial
from the certificate by extracting it with the openssl binary.
If that fails due to the binary not being available, a fallback
match is used, but the attempt to execute a missing binary adds
a warning to the output which can confuse readers for a failure
in the test. Fix by only attempting if the openssl binary was
found by autoconf/meson.
Backpatch down to v16 where commit c8e4030d1bdd made the test
use the OPENSSL variable from autoconf/meson instead of a hard-
coded value.
Author: Daniel Gustafsson <daniel@yesql.se>
Reported-by: Christoph Berg <myon@debian.org>
Discussion: https://postgr.es/m/aNPSp1-RIAs3skZm@msg.df7cb.de
Backpatch-through: 16
|
|
Previously, this was initialized at run time so that it did not have
to be maintained by hand in guc_tables.c. But since that table is now
generated anyway, we might as well generate this bit as well.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8fdfb91e-60fb-44fa-8df6-f5dea47353c9@eisentraut.org
|
|
This makes the generating script simpler and the output easier to
read. In the future, it will make it easier to reorder and rearrange
the underlying C structures.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8fdfb91e-60fb-44fa-8df6-f5dea47353c9@eisentraut.org
|
|
The function returns false if it fails to allocate memory, so
make sure to check the return value in callsites.
Author: Aleksander Alekseev <aleksander@tigerdata.com>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CAJ7c6TNPrU8ZxgdfN3PyGY1tzo0bgszx+KkqW0Z7zt3heyC1GQ@mail.gmail.com
|
|
The URL for "Sorting and Searching Algorithms: A Cookbook"
by Thomas Niemann has started returning 404, and since we
refer to the page for license terms this replaces the now
defunct link with one to the copy on archive.org.
Author: Chao Li <lic@highgo.com>
Discussion: https://postgr.es/m/6DED3DEF-875E-4D1D-8F8F-7353D5AF7B79@gmail.com
|
|
The TAP tests whose ok() calls are changed in this commit were relying
on perl operators, rather than equivalents available in Test::More. For
example, rather than the following:
ok($data =~ qr/expr/m, "expr matching");
ok($data !~ qr/expr/m, "expr not matching");
The new test code uses this equivalent:
like($data, qr/expr/m, "expr matching");
unlike($data, qr/expr/m, "expr not matching");
A huge benefit of the new formulation is that it is possible to know
about the values we are checking if a failure happens, making debugging
easier, should the test runs happen in the buildfarm, in the CI or
locally.
This change leads to more test code overall as perltidy likes to make
the code pretty the way it is in this commit.
Author: Sadhuprasad Patro <b.sadhu@gmail.com>
Discussion: https://postgr.es/m/CAFF0-CHhwNx_Cv2uy7tKjODUbeOgPrJpW4Rpf1jqB16_1bU2sg@mail.gmail.com
|
|
042_low_level_backup compared the result of a query two times with a
comparison operator based on an integer, while the result should be
compared with a string.
The outcome of the tests is currently not impacted by this change.
However, it could be possible that the tests fail to detect future
issues if the query results become different, for some reason.
Oversight in 99b4a63bef94.
Author: Sadhuprasad Patro <b.sadhu@gmail.com>
Discussion: https://postgr.es/m/CAFF0-CHhwNx_Cv2uy7tKjODUbeOgPrJpW4Rpf1jqB16_1bU2sg@mail.gmail.com
Backpatch-through: 17
|
|
040_pg_createsubscriber has been calling safe_psql(), that returns the
result of a SQL query, with ok() without checking the result generated
(in this case 't', for a number of publications).
The outcome of the tests is currently not impacted by this change.
However, it could be possible that the test fails to detect future
issues if the query results become different.
The test is rewritten so as the number of publications is checked. This
is not the fix suggested originally by the author, but this is more
reliable in the long run.
Oversight in e5aeed4b8020.
Author: Sadhuprasad Patro <b.sadhu@gmail.com>
Discussion: https://postgr.es/m/CAFF0-CHhwNx_Cv2uy7tKjODUbeOgPrJpW4Rpf1jqB16_1bU2sg@mail.gmail.com
Backpatch-through: 18
|
|
The original formulation failed to take into account the fact that for
the PGXS case, the source dir is not $(top_srcdir), so it ended up not
doing anything. Handle it explicitly.
Author: Ryo Matsumura <matsumura.ryo@fujitsu.com>
Reviewed-by: Bryan Green <dbryan.green@gmail.com>
Backpatch-through: 13
Discussion: https://postgr.es/m/TYCPR01MB113164770FB0B0BE6ED21E68EE8DCA@TYCPR01MB11316.jpnprd01.prod.outlook.com
|
|
Add a test case to cover pg_dump with --compress=none. This
brings the coverage of compress_none.c up from about 64% to 90%,
in particular covering the new code added in a previous patch.
Include compression of toc.dat in manually-compressed test cases.
We would have found the bug fixed in commit a239c4a0c much sooner
if we'd done this. As far as I can tell, this doesn't reduce test
coverage at all, since there are other tests of directory format
that still use an uncompressed toc.dat.
Widen the wide row used to verify correct (de) compression.
Commit 1a05c1d25 advises us (not without reason) to ensure that
this test case fully fills DEFAULT_IO_BUFFER_SIZE, so that loops
within the compression logic will iterate completely. To follow
that advice with the proposed DEFAULT_IO_BUFFER_SIZE of 128K,
we need something close to this. This does indeed increase the
reported code coverage by a few lines.
While here, fix a glitch that I noticed in testing: the
$glob_patterns tests were incapable of failing, because glob()
will return 'foo' as 'foo' whether there is a matching file or
not. (Indeed, the stanza just above that one relies on that.)
In my testing, this patch adds approximately as much runtime
as was saved by the previous patch, so that it's about a wash
compared to the old code. However, we get better test coverage.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3515357.1760128017@sss.pgh.pa.us
|
|
Add a new test script 006_pg_dump_compress.pl, containing just
the pg_dump tests specifically concerned with compression, and
remove those tests from 002_pg_dump.pl. We can also drop some
infrastructure in 002_pg_dump.pl that was used only for these tests.
The point of this is to avoid the cost of running these test
cases over and over in all the scenarios (runs) that 002_pg_dump.pl
exercises. We don't learn anything more about the behavior of the
compression code that way, and we expend significant amounts of
time, since one of these test cases is quite large and due to get
larger.
The intent of this specific patch is to provide exactly the same
coverage as before, except that I went back to using --no-sync
in all the test runs moved over to 006_pg_dump_compress.pl.
I think that avoiding that had basically been cargo-culted into
these test cases as a result of modeling them on the
defaults_custom_format test case; again, doing that over and over
isn't going to teach us anything new.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3515357.1760128017@sss.pgh.pa.us
|
|
After commit fe8192a95, compress_zstd.c tends to produce data block
sizes around 128K, and we don't really have any control over that
unless we want to overrule ZSTD_CStreamOutSize(). Which seems like
a bad idea. But let's try to align the other compression modes to
produce block sizes roughly comparable to that, so that pg_restore's
skip-data performance isn't enormously different for different modes.
gzip compression can be brought in line simply by setting
DEFAULT_IO_BUFFER_SIZE = 128K, which this patch does. That
increases some unrelated buffer sizes, but none of them seem
problematic for modern platforms.
lz4's idea of appropriate block size is highly nonlinear:
if we just increase DEFAULT_IO_BUFFER_SIZE then the output
blocks end up around 200K. I found that adjusting the slop
factor in LZ4State_compression_init was a not-too-ugly way
of bringing that number roughly into line.
With compress = none you get data blocks the same sizes as the
table rows, which seems potentially problematic for narrow tables.
Introduce a layer of buffering to make that case match the others.
Comments in compress_io.h and 002_pg_dump.pl suggest that if
we increase DEFAULT_IO_BUFFER_SIZE then we need to increase the
amount of data fed through the tests in order to improve coverage.
I've not done that here, leaving it for a separate patch.
Author: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/3515357.1760128017@sss.pgh.pa.us
|
|
This information appears to have been unused since commit
c5b7ba4e67. We could not find any references in third-party code,
either.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aO_CyFRpbVMtgJWM%40nathan
|
|
To support the upcoming addition of a sequence synchronization worker,
this patch extracts common synchronization logic shared by table sync
workers and the new sequence sync worker into a dedicated file. This
modularization improves code reuse, maintainability, and clarity in the
logical workers framework.
Author: vignesh C <vignesh21@gmail.com>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
|
|
EvalPlanQualStart() failed to propagate es_partition_directory into
the child EState used for EPQ rechecks. When execution time partition
pruning ran during the EPQ scan, executor code dereferenced a NULL
partition directory and crashed.
Previously, propagating es_partition_directory into the EPQ EState was
unnecessary because CreatePartitionPruneState(), which sets it on
demand, also initialized the exec-pruning context. After commit
d47cbf474, CreatePartitionPruneState() now initializes only the init-
time pruning context, leaving exec-pruning context initialization to
ExecInitNode(). Since EvalPlanQualStart() runs only ExecInitNode() and
not CreatePartitionPruneState(), it can encounter a NULL
es_partition_directory. Other executor fields initialized during
CreatePartitionPruneState() are already copied into the child EState
thanks to commit 8741e48e5d, but es_partition_directory was missed.
Fix by borrowing the parent estate's es_partition_directory in
EvalPlanQualStart(), and by clearing that field in EvalPlanQualEnd()
so the parent remains responsible for freeing the directory.
Add an isolation test permutation that triggers EPQ with execution-
time partition pruning, the case that reproduces this crash.
Bug: #19078
Reported-by: Yuri Zamyatin <yuri@yrz.am>
Diagnosed-by: David Rowley <dgrowleyml@gmail.com>
Author: David Rowley <dgrowleyml@gmail.com>
Co-authored-by: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/19078-dfd62f840a2c0766@postgresql.org
Backpatch-through: 18
|
|
Per report from buildfarm member prion. The CI does not use this
parameter, and this buildfarm member sets log_error_verbosity to
"verbose". This would generate extra LOCATION entries in the logs,
causing the regexps of the test to fail.
Trying to support log_error_verbosity=verbose in the test would mean to
tweak all the regexps used in the test to detect an optional set of
LOCATION lines, at least. This would not improve the coverage, and
forcing the GUC value is simpler.
Oversight in 76bba033128a.
Discussion: https://postgr.es/m/aPBaNNGiYT3xMBN1@paquier.xyz
|
|
Temporary file usage is sometimes attributed to the wrong query in the logs
output. One identified reason is that unnamed portal cleanup (and
consequently temp file logging) happens during the next BIND message as
a, after debug_query_string has already been updated to the new query.
Dropping an unnamed portal in the next BIND message is a rather old
protocol behavior (fe19e56c572f, also mentioned in the docs).
log_temp_files is a bit newer than that, as of be8a4318815.
This commit adds tests to track which query is displayed next to the
temporary file(s) removed when a portal is dropped, and in some cases if
a query is displayed or not. We have not concluded how to improve the
situation yet; these tests will at least help in checking what changes
in the logs depending on the proposal discussed and how it affects the
scenarios tracked by this new test.
Author: Sami Imseih <samimseih@gmail.com>
Author: Frédéric Yhuel <frederic.yhuel@dalibo.com>
Reviewed-by: Mircea Cadariu <cadariu.mircea@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/3d07ee43-8855-42db-97e0-bad5db82d972@dalibo.com
|
|
This commit adjusts RangeVarCallbackForReindexIndex() to handle an
extremely unlikely race condition involving concurrent OID reuse.
In short, if REINDEX INDEX is executed at the same time that the
index is re-created with the same name and OID but a different
parent table OID, we might lock the wrong parent table. To fix,
simply detect when this happens and emit an ERROR. Unfortunately,
we can't gracefully handle this situation because we will have
already locked the index, and we must lock the parent table before
the index to avoid deadlocks.
While at it, I've replaced all but one early return in this
callback function with ERRORs that should be unreachable. While I
haven't verified the presence of a live bug, the checks in question
appear to be unnecessary, and the early returns seem prone to
breaking the parent table locking code in subtle ways. If nothing
else, this simplifies the code a bit.
This is a bug fix and could be back-patched, but given the presumed
rarity of the race condition and the lack of reports, I'm not going
to bother.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/Z8zwVmGzXyDdkAXj%40nathan
|
|
Per-character pg_locale_t APIs. Useful for tsearch parsing and
potentially other places.
Significant overlap with the regc_wc_isalpha() and related functions
in regc_pg_locale.c, but this change leaves those intact for
now.
Discussion: https://postgr.es/m/0151ad01239e2cc7b3139644358cf8f7b9622ff7.camel@j-davis.com
|
|
Presently, these functions look up the relation's OID, lock it, and
then check privileges. Not only does this approach provide no
guarantee that the locked relation matches the arguments of the
lookup, but it also allows users to briefly lock relations for
which they do not have privileges, which might enable
denial-of-service attacks. This commit adjusts these functions to
use RangeVarGetRelidExtended(), which is purpose-built to avoid
both of these issues. The new RangeVarGetRelidCallback function is
somewhat complicated because it must handle both tables and
indexes, and for indexes, we must check privileges on the parent
table and lock it first. Also, it needs to handle a couple of
extremely unlikely race conditions involving concurrent OID reuse.
A downside of this change is that the coding doesn't allow for
locking indexes in AccessShare mode anymore; everything is locked
in ShareUpdateExclusive mode. Per discussion, the original choice
of lock levels was intended for a now defunct implementation that
used in-place updates, so we believe this change is okay.
Reviewed-by: Jeff Davis <pgsql@j-davis.com>
Discussion: https://postgr.es/m/Z8zwVmGzXyDdkAXj%40nathan
Backpatch-through: 18
|
|
This is not specific to the GUC parameter type, so it can be part of
the generic struct rather than the type-specific struct (like the
related "extra" field). This allows for some code simplifications.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8fdfb91e-60fb-44fa-8df6-f5dea47353c9@eisentraut.org
|
|
The log output functionality of log_autovacuum_min_duration applies to
both VACUUM and ANALYZE, so it is not possible to separate the VACUUM
and ANALYZE log output thresholds. Logs are likely to be output only for
VACUUM and not for ANALYZE.
Therefore, we decided to separate the threshold for log output of VACUUM
by autovacuum (log_autovacuum_min_duration) and the threshold for log
output of ANALYZE by autovacuum (log_autoanalyze_min_duration).
Author: Shinya Kato <shinya11.kato@gmail.com>
Reviewed-by: Kasahara Tatsuhito <kasaharatt@oss.nttdata.com>
Discussion: https://www.postgresql.org/message-id/flat/CAOzEurQtfV4MxJiWT-XDnimEeZAY+rgzVSLe8YsyEKhZcajzSA@mail.gmail.com
|
|
If inside an EPQ recheck, ExecScanFetch would run the recheck method
function for foreign/custom joins even if they aren't descendant nodes
in the EPQ recheck plan tree, which is problematic at least in the
foreign-join case, because such a foreign join isn't guaranteed to have
an alternative local-join plan required for running the recheck method
function; in the postgres_fdw case this could lead to a segmentation
fault or an assert failure in an assert-enabled build when running the
recheck method function.
Even if inside an EPQ recheck, any scan nodes that aren't descendant
ones in the EPQ recheck plan tree should be normally processed by using
the access method function; fix by modifying ExecScanFetch so that if
inside an EPQ recheck, it runs the recheck method function for
foreign/custom joins that are descendant nodes in the EPQ recheck plan
tree as before and runs the access method function for foreign/custom
joins that aren't.
This fix also adds to postgres_fdw an isolation test for an EPQ recheck
that caused issues stated above.
Oversight in commit 385f337c9.
Reported-by: Kristian Lejao <kristianlejao@gmail.com>
Author: Masahiko Sawada <sawada.mshk@gmail.com>
Co-authored-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Etsuro Fujita <etsuro.fujita@gmail.com>
Discussion: https://postgr.es/m/CAD21AoBpo6Gx55FBOW+9s5X=nUw3Xpq64v35fpDEKsTERnc4TQ@mail.gmail.com
Backpatch-through: 13
|
|
in guc-related source files, in anticipation of some further
restructuring.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8fdfb91e-60fb-44fa-8df6-f5dea47353c9@eisentraut.org
|
|
in guc-related source files, in anticipation of some further
restructuring.
Reviewed-by: Chao Li <li.evan.chao@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/8fdfb91e-60fb-44fa-8df6-f5dea47353c9@eisentraut.org
|
|
This essentially reverts commit 866566a690b, which installed
safeguards against loading plpython2 and plpython3 into the same
process. We don't support plpython2 anymore, so this is obsolete.
The Python and PL/Python initialization now happens again in
_PG_init() rather than the first time a PL/Python call handler is
invoked. (Often, these will be very close together.)
I kept the separate PLy_initialize() function introduced by
866566a690b to keep _PG_init() a bit modular.
Reviewed-by: Mario González Troncoso <gonzalemario@gmail.com>
Reviewed-by: Nathan Bossart <nathandbossart@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/9eb9feb6-1df3-4f0c-a0dc-9bcf35273111%40eisentraut.org
|
|
This patch replaces ALTER SUBSCRIPTION REFRESH with
ALTER SUBSCRIPTION REFRESH PUBLICATION in comments and error messages to
improve clarity and support future extensibility. The change aligns with
upcoming addition REFRESH SEQUENCES for sequence synchronization.
Author: vignesh C <vignesh21@gmail.com>
Author: Hou Zhijie <houzj.fnst@fujitsu.com>
Reviewed-by: shveta malik <shveta.malik@gmail.com>
Reviewed-by: Dilip Kumar <dilipbalaut@gmail.com>
Reviewed-by: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Hayato Kuroda <kuroda.hayato@fujitsu.com>
Reviewed-by: Amit Kapila <amit.kapila16@gmail.com>
Discussion: https://postgr.es/m/CAA4eK1LC+KJiAkSrpE_NwvNdidw9F2os7GERUeSxSKv71gXysQ@mail.gmail.com
|
|
pg_createsubscriber is documented as requiring the same major version as
the target clusters. Attempting to use this tool on a cluster where the
control file version read does not match with the version compiled with
would lead to the following error message:
pg_createsubscriber: error: control file appears to be corrupt
This is confusing as the control file is correct: only the version
expected does not match. This commit integrates pg_createsubscriber
with the facility added by cd0be131ba6f, where the contents of
PG_VERSION are read and compared with the value of PG_MAJORVERSION_NUM
expected by the tool. This puts pg_createsubscriber in line with the
documentation, with a better error message when the version does not
match.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/aONDWig0bIGilixs@paquier.xyz
|
|
pg_resetwal's custom logic to retrieve the version number of a data
folder's PG_VERSION can be replaced by the facility introduced in
cd0be131ba6f. This removes some code.
One thing specific to pg_resetwal is that the first line of PG_VERSION
is read and reported in the error report generated when the major
version read does not match with the version pg_resetwal has been
compiled with. The new logic preserves this property, without changes
to neither the error message nor the data used in the error report.
Note that as a chdir() is done within the data folder before checking the
data of PG_VERSION, get_pg_version() needs to be tweaked to look for
PG_VERSION in the current folder.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/aOiirvWJzwdVCXph@paquier.xyz
|
|
pg_combinebackup's custom logic to retrieve the version number of a data
folder's PG_VERSION can be replaced by the facility introduced in
cd0be131ba6f. This removes some code.
One thing specific to this tool is that backend versions older than v10
are not supported. The new code does the same checks as the previous
code.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/aOiirvWJzwdVCXph@paquier.xyz
|
|
drop."
This reverts commit 74ac377d75135e02064fc4427bec401277b4f60c.
The previous change contained a misconception about how publications
are cleaned up on the subscriber. The newly added log message could
confuse users, particularly when running pg_createsubscriber with
--dry-run - users would see a "dropping publication" message
immediately followed by a "no publications found" message.
Discussion: https://postgr.es/m/CAHut+Pu7xz1LqNvyQyvSHrV0Sw6D=e6T-Jm=gh1MRJrkuWGyBQ@mail.gmail.com
|
|
This function only requires a few fields from LVRelState, so pass them
in individually.
This change allows calling heap_page_is_all_visible() from code such as
pruneheap.c, which does not have access to an LVRelState.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/2wk7jo4m4qwh5sn33pfgerdjfujebbccsmmlownybddbh6nawl%40mdyyqpqzxjek
|
|
These functions appeared prominently in a profile of a patch that sets
the visibility map on-access. Inline them to remove call overhead and
make them cheaper to use in hot paths.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Kirill Reshke <reshkekirill@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/2wk7jo4m4qwh5sn33pfgerdjfujebbccsmmlownybddbh6nawl%40mdyyqpqzxjek
|
|
After scanning the line pointers on a heap page during the first phase
of vacuum, we use the information collected to decide whether to use
the assembled freeze plans.
Move this decision logic into a helper function to improve readability.
While here, rename a PruneState member and disambiguate some local
variables in heap_page_prune_and_freeze().
Author: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/2wk7jo4m4qwh5sn33pfgerdjfujebbccsmmlownybddbh6nawl%40mdyyqpqzxjek
|
|
When specifying --clean=publication to pg_createsubscriber, it drops
all existing publications with a log message "dropping all existing
publications in database "testdb"". Add a new log message "no
publications found" when there are no publications to drop, making the
progress more transparent to users.
Author: Peter Smith <smithpb2250@gmail.com>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/CAHut+Ptm+WJwbbYXhC0s6FP_98KzZCR=5CPu8F8N5uV8P7BpqA@mail.gmail.com
|
|
Use the more specific prefix "regc_" rather than the generic prefix
"pg_".
A subsequent commit will create generic versions of some of these
functions that can be called from other modules.
Discussion: https://postgr.es/m/0151ad01239e2cc7b3139644358cf8f7b9622ff7.camel@j-davis.com
|
|
add323da40a6 altered xl_heap_prune, changing the WAL format, but
neglected to bump XLOG_PAGE_MAGIC. Do so now.
Author: Melanie Plageman <melanieplageman@gmail.com>
Reported-by: Kirill Reshke <reshkekirill@gmail.com>
Reported-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/aO3Gw6hCAZFUd5ab%40paquier.xyz
|
|
Previously WinCheckAndInitializeNullTreatment() used elog() to emit an
error message. ereport() should be used instead because it's a
user-facing error. Also use existing get_func_name() to get a
function's name, rather than own implementation.
Moreover add an assertion to validate winobj parameter, just like
other window function API.
Reported-by: Tom Lane <tgl@sss.pgh.pa.us>
Author: Tatsuo Ishii <ishii@postgresql.org>
Reviewed-by: Chao Li <lic@highgo.com>
Discussion: https://postgr.es/m/2952409.1760023154%40sss.pgh.pa.us
|
|
The field name "apply_at" in RelAggInfo was a bit ambiguous. Rename
it to "apply_agg_at" to improve clarity and make its purpose clearer.
Per complaint from David Rowley, Robert Haas.
Suggested-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA+TgmoZ0KR2_XCWHy17=HHcQ3p2Mamc9c6Dnnhf1J6wPYFD9ng@mail.gmail.com
|
|
Unsurprisingly, this shaves code. get_major_server_version() can be
replaced by the new routine added by cd0be131ba6f, with the contents of
PG_VERSION stored in an allocated buffer instead of a fixed-sized one.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/aOiirvWJzwdVCXph@paquier.xyz
|
|
get_pg_version() is able to return a version number, that can be used
for comparisons based on PG_VERSION_NUM. A macro is added to convert
the result to a major version number, to work with PG_MAJORVERSION_NUM.
It is possible to pass to the routine an optional argument, where the
contents retrieved from PG_VERSION are saved. This requirement matters
for some of the frontend code (one example: pg_upgrade wants that for
tablespace paths with a version number strictly older than v10).
This will be used by a set of follow-up patches, to be consumed in
various frontend tools that duplicate a logic similar to do what this
new routine does, like:
- pg_resetwal
- pg_combinebackup
- pg_createsubscriber
- pg_upgrade
This routine supports both the post-v10 version number and the older
flavor (aka 9.6), as required at least by pg_upgrade.
Author: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Masahiko Sawada <sawada.mshk@gmail.com>
Discussion: https://postgr.es/m/aOiirvWJzwdVCXph@paquier.xyz
|
