| Age | Commit message (Collapse) | Author |
|---|
|
|
|
> situation is already tracked in File routines, but a little bit
> incorrectly.
> After small survey in Linux kernel code, I am not sure about
> it. New patch set pos to unknown in the case of read/write
> fails. And do lseek again.
> Here is the full patch for this. This patch reduce amount of
> lseek call ten ti mes for update statement and twenty times for
> select statement. I tested joined up date and count(*) select
> for table with rows > 170000 and 10 indices. I think this is
> worse of trying. Before lseek calls account for more than 5% o
> f time. Now they are 0.89 and 0.15 respectevly.
>
> Due to only one file modification patch should be applied in
> src/backedn/stora ge/file/ dir.
-- Sincerely Yours,
Denis Perchine
|
|
have'nt r un autoconf to create a new configure, I guess that's done by
the smapshot process, I had to remove a line from interface/odbc/
GNUMakefile to get it to build, it was a autoconf variable that looks to
not be used anymore, I am assuming that this is ok.
Nick Gorham
Easysoft Ltd
|
|
|
|
the
tcl-spec in the Makefile.
The patch in the attachemant does this in the src/interfaces/libpgtcl
too
Thank you
Rudolf Weber
|
|
functions that take pass-by-value datatypes. Should be ready for
port testing ...
|
|
|
|
compatiblity with old rules.
|
|
|
|
|
|
|
|
|
|
>> Makefile where the make bombs if "." is not in the builder's path?
>> The last I checked, it wasn't applied and the fix is very easy
>> (explicitly use "./" to call the script).
SL Baur
|
|
quote-stripping, and acl-checking tasks for these functions from the
parser, and do them at function execution time instead. This fixes
the failure of pg_dump to produce correct output for nextval(Foo)
used in a rule, and also eliminates the restriction that the argument
of these functions must be a parse-time constant.
|
|
Interfaced a lot of the custom tests to the config.cache, in the process
made them separate macros and grouped them out into files. Made naming
adjustments.
Removed a couple of useless/unused configure tests.
Disabled C++ by default. C++ is no more special than Perl, Python, and Tcl.
And it breaks equally often. :(
|
|
that now functions as a wrapper around the MakeMaker stuff. It might
even behave sensically when we have separate build dirs. Same for plperl,
which of course still doesn't work very well. Made sure that plperl
respects the choice of --libdir.
Added --with-python to automatically build and install the Python interface.
Works similarly to the Perl5 stuff.
Moved the burden of the distclean targets lower down into the source tree.
Eventually, each make file should have its own.
Added automatic remaking of makefiles and configure. Currently only for the
top-level because of a bug(?) in Autoconf. Use GNU `missing' to work around
missing autoconf and aclocal. Start factoring out macros into their own
config/*.m4 files to increase readability and organization.
|
|
|
|
|
|
really worked. Until now.
|
|
fflush(stderr)'s for good luck.
|
|
|
|
absolute. It also makes it more compliant with the interface
specification in Sun's documentation;
1. absolute(0) should throw an exception.
2. absolute(>num-records) should set the current row to after the last
record in addition to returning false.
3. absolute(<num-records) should set the current row to before the first
record in addition to returning false.
These operations in the existing code just return false and don't change
current_row.
These changes required a minor change to relative(int) since it calls
absolute(int)
The attached patch is against the cvs repository tree as of this morning.
Also, who is in charge of maintaining the jdbc driver? I'm working on
getArray for the jdbc2 driver, but it's going to require three more
classes to be added to the driver, and thus three more source files
in the repository. Is there someone I can contact directly to ask about
this?
Travis Bauer | CS Grad Student | IU |www.cs.indiana.edu/~trbauer
|
|
postgres build and use unixODBC (http://www.unixodbc.org)
This patch was applied against the postgresql-7.0beta1 build
Any problems let me know.
Nick Gorham
|
|
more restriction for fretful users. The current PG allow define only
NO-CREATE-DB and NO-CREATE-USER restriction, but for some users I need
NO-CREATE-TABLE and NO-LOCK-TABLE.
This patch add to current code NOCREATETABLE and NOLOCKTABLE feature:
CREATE USER username
[ WITH
[ SYSID uid ]
[ PASSWORD 'password' ] ]
[ CREATEDB | NOCREATEDB ] [ CREATEUSER | NOCREATEUSER ]
-> [ CREATETABLE | NOCREATETABLE ] [ LOCKTABLE | NOLOCKTABLE ]
...etc.
If CREATETABLE or LOCKTABLE is not specific in CREATE USER command,
as default is set CREATETABLE or LOCKTABLE (true).
A user with NOCREATETABLE restriction can't call CREATE TABLE or
SELECT INTO commands, only create temp table is allow for him.
Karel
|
|
pg_dump -o -u some_db >dump_file
works.
|
|
|
|
|
|
to_char. I don't know about the rest of the world, but the "standard" in
Australia is the following:
1st, 2nd, 3rd, 4th - 9th
10th - 19th
21st, 22nd, 23rd, 24th - 29th (similarly for 30s - 90s)
110th - 119th (and for all "teens")
121st, 122nd, 123rd, 124th - 129th
I think you see the trend. The current code works fine except that it
produces:
111st, 112nd, 113rd, 114th - 119th
211st, 212nd, 213rd, 214th - 219th ... and so on.
Without knowing anything about what's supported (and what isn't) in the usual
I18N libraries, should this type of behaviour be defined within the locales?
Daniel Baldoni
|
|
warnings).
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
It addresses three issues:
1. The problem with ResultSet's interface specifying 1-based indexing was
not quite fixed in 7.0.2. absolute would stop the user form moving to the
first record (record 0 internally).
2. Absolute did not set current_row
3. For field.mod=-1, GetObject would try to return numeric values with a
precision of around 65000. Now GetObject detects when field.mod==-1, and
passes that as the scale to getBigDecimal. getBigDecimal detects when a
-1 is passed and simply does not scale the value returned. You still get
the correct value back, it simply does not tweak the precision.
I'm working off of a source tree I just checked out from the
repository. The diff is based on what was in the repository about ten
minutes ago.
----------------------------------------------------------------
Travis Bauer | CS Grad Student | IU |www.cs.indiana.edu/~trbauer
----------------------------------------------------------------
|
|
CPP) to create platform independent files. Unfortunately, that means that
every config.status (or configure) run invariably causes a relink of the
postmaster and also that we can't put these files in the distribution
(usefully). So we make it a little smarter: when the output files already
exist and it notices that it would recreate them in identical form, it
doesn't touch them. In order to avoid re-running the make rule all the time
we update a timestamp file instead.
Update release_prep accordingly. Also make Gen_fmgrtab.sh use the awk that
is detected at configure time, not necessarily named `awk' and have it check
for exit statuses a little better.
In other news... Remove USE_LOCALE from the templates, it was set to `no'
everywhere anyway. Also remove YACC and YFLAGS from the templates, configure
is smart enough to find bison or yacc itself. Use AC_PROG_YACC for that
instead of the hand-crafted code. Do not set YFLAGS to `-d'. The make rules
that need this flag should explicitly invoke it. YFLAGS should be a user
variable. Update the makefiles to that effect.
|
|
|
|
|
|
|
|
configuration helper things into config/ dir. Adjusted some relative paths
in makefiles.
|
|
over multiple lookups --- it should use SearchSysCacheTupleCopy instead.
This accounts for rare failures like 'init_fcache: null probin for procedure 481'
when running concurrently with a VACUUM.
|
|
|
|
direct pointer into the syscache entry for the type. In some cases
the syscache entry might get flushed before we are done using the
returned type name. This bug accounts for difficult-to-repeat
failures seen when INSERTs into columns of certain data types are
run in parallel with VACUUMs of system tables. There may be related
problems elsewhere --- we need to take a harder look at uses of
syscache data.
|
|
|
|
clean (it's dynamically built)
Fixed Statement, so that the update count is valid when an SQL DELETE operation is done.
While fixing the update count, made it easier to get the OID of the last insert as well. Example is in example/basic.java
|
|
|
|
|
