| Age | Commit message (Collapse) | Author |
|---|
|
"iterstate" must be marked volatile since it's changed inside the PG_TRY
block and then used in the PG_CATCH stanza. Noted by Mark Wilding of
Salesforce. (We really need to see if we can't get the C compiler to warn
about this.)
Also, reset iterstate to NULL after the mainline ReorderBufferIterTXNFinish
call, to ensure the PG_CATCH block doesn't try to do that a second time.
|
|
strncpy() has a well-deserved reputation for being unsafe, so make an
effort to get rid of nearly all occurrences in HEAD.
A large fraction of the remaining uses were passing length less than or
equal to the known strlen() of the source, in which case no null-padding
can occur and the behavior is equivalent to memcpy(), though doubtless
slower and certainly harder to reason about. So just use memcpy() in
these cases.
In other cases, use either StrNCpy() or strlcpy() as appropriate (depending
on whether padding to the full length of the destination buffer seems
useful).
I left a few strncpy() calls alone in the src/timezone/ code, to keep it
in sync with upstream (the IANA tzcode distribution). There are also a
few such calls in ecpg that could possibly do with more analysis.
AFAICT, none of these changes are more than cosmetic, except for the four
occurrences in fe-secure-openssl.c, which are in fact buggy: an overlength
source leads to a non-null-terminated destination buffer and ensuing
misbehavior. These don't seem like security issues, first because no stack
clobber is possible and second because if your values of sslcert etc are
coming from untrusted sources then you've got problems way worse than this.
Still, it's undesirable to have unpredictable behavior for overlength
inputs, so back-patch those four changes to all active branches.
|
|
This results in a very substantial reduction in disk space usage during
"make check-world", since that sequence involves creation of numerous
temporary installations. It should also help a bit in the buildfarm, even
though the buildfarm script doesn't create as many temp installations,
because the current script misses deleting some of them; and anyway it
seems better to do this once in one place rather than expecting that
script to get it right every time.
In 9.4 and HEAD, also undo the unwise choice in commit b1aebbb6a86e96d7
to report strerror(errno) after a rmtree() failure. rmtree has already
reported that, possibly for multiple failures with distinct errnos; and
what's more, by the time it returns there is no good reason to assume
that errno still reflects the last reportable error. So reporting errno
here is at best redundant and at worst badly misleading.
Back-patch to all supported branches, so that future revisions of the
buildfarm script can rely on this behavior.
|
|
Per discussion, change the log level of this message to be LOG not WARNING.
The main point of this change is to avoid causing buildfarm run failures
when the stats collector is exceptionally slow to respond, which it not
infrequently is on some of the smaller/slower buildfarm members.
This change does lose notice to an interactive user when his stats query
is looking at out-of-date stats, but the majority opinion (not necessarily
that of yours truly) is that WARNING messages would probably not get
noticed anyway on heavily loaded production systems. A LOG message at
least ensures that the problem is recorded somewhere where bulk auditing
for the issue is possible.
Also, instead of an untranslated "pgstat wait timeout" message, provide
a translatable and hopefully more understandable message "using stale
statistics instead of current ones because stats collector is not
responding". The original text was written hastily under the assumption
that it would never really happen in practice, which we now know to be
unduly optimistic.
Back-patch to all active branches, since we've seen the buildfarm issue
in all branches.
|
|
pg_dump.c:dumDatabase() called ArchiveEntry() with the results of a a
query that was PQclear()ed a couple lines earlier.
Backpatch to 9.2 where security labels for shared objects where
introduced.
|
|
Previously, the xml value resulting from an xpath query would not have
namespace declarations if the namespace declarations were attached to
an ancestor element in the input xml value. That means the output value
was not correct XML. Fix that by running the result value through
xmlCopyNode(), which produces the correct namespace declarations.
Author: Ali Akbar <the.apaan@gmail.com>
|
|
Previous fix mapped "Norwegian (Bokmål)" locale, which contains a non-ASCII
character, to the pure ASCII alias "norwegian-bokmal". However, it turns
out that more recent versions of the CRT library, in particular MSVCR110
(Visual Studio 2012), changed the behaviour of setlocale() so that if
you pass "norwegian-bokmal" to setlocale, it returns "Norwegian_Norway".
That meant trouble, when setlocale(..., NULL) first returned
"Norwegian (Bokmål)_Norway", which we mapped to "norwegian-bokmal_Norway",
but another call to setlocale(..., "norwegian-bokmal_Norway") returned
"Norwegian_Norway". That caused PostgreSQL to think that they are different
locales, and therefore not compatible. That caused initdb to fail at
CREATE DATABASE.
Older CRT versions seem to accept "Norwegian_Norway" too, so change the
mapping to return "Norwegian_Norway" instead of "norwegian-bokmal".
Backpatch to 9.2 like the previous attempt. We haven't made a release that
includes the previous fix yet, so we don't need to worry about changing the
locale of existing clusters from "norwegian-bokmal" to "Norwegian_Norway".
(Doing any mapping like this at all requires changing the locale of
existing databases; the release notes need to include instructions for
that).
|
|
Commit 894459e59ffa5c7fee297b246c17e1f72564db1d revealed this option to
be broken for NLS builds on Darwin, but "make -C contrib/unaccent check"
and the buildfarm client rely on it. Fix that configuration by
redefining the option to imply LANG=C on Darwin. In passing, use LANG=C
instead of LANG=en on Windows; since only postmaster startup uses that
value, testers are unlikely to notice the change. Back-patch to 9.0,
like the predecessor commit.
|
|
Up to now, the "child" executor state trees generated for EvalPlanQual
rechecks have simply shared the ResultRelInfo arrays used for the original
execution tree. However, this leads to dangling-pointer problems, because
ExecInitModifyTable() is all too willing to scribble on some fields of the
ResultRelInfo(s) even when it's being run in one of those child trees.
This trashes those fields from the perspective of the parent tree, because
even if the generated subtree is logically identical to what was in use in
the parent, it's in a memory context that will go away when we're done
with the child state tree.
We do however want to share information in the direction from the parent
down to the children; in particular, fields such as es_instrument *must*
be shared or we'll lose the stats arising from execution of the children.
So the simplest fix is to make a copy of the parent's ResultRelInfo array,
but not copy any fields back at end of child execution.
Per report from Manuel Kniep. The added isolation test is based on his
example. In an unpatched memory-clobber-enabled build it will reliably
fail with "ctid is NULL" errors in all branches back to 9.1, as a
consequence of junkfilter->jf_junkAttNo being overwritten with $7f7f.
This test cannot be run as-is before that for lack of WITH syntax; but
I have no doubt that some variant of this problem can arise in older
branches, so apply the code change all the way back.
|
|
The flag is supposed to be copied from the record. Same issue with
track_commit_timestamps, but that's master-only.
Report and fix by Petr Jalinek. Backpatch to 9.4, where wal_log_hints was
added.
|
|
As of 9.3, ruleutils.c goes to some lengths to ensure that table and column
aliases used in its output are unique. Of course this takes more time than
was required before, which in itself isn't fatal. However, EXPLAIN was set
up so that recalculation of the unique aliases was repeated for each
subexpression printed in a plan. That results in O(N^2) time and memory
consumption for large plan trees, which did not happen in older branches.
Fortunately, the expensive work is the same across a whole plan tree,
so there is no need to repeat it; we can do most of the initialization
just once per query and re-use it for each subexpression. This buys
back most (not all) of the performance loss since 9.2.
We need an extra ExplainState field to hold the precalculated deparse
context. That's no problem in HEAD, but in the back branches, expanding
sizeof(ExplainState) seems risky because third-party extensions might
have local variables of that struct type. So, in 9.4 and 9.3, introduce
an auxiliary struct to keep sizeof(ExplainState) the same. We should
refactor the APIs to avoid such local variables in future, but that's
material for a separate HEAD-only commit.
Per gripe from Alexey Bashtanov. Back-patch to 9.3 where the issue
was introduced.
|
|
Commit b94ce6e80 reordered postmaster's startup sequence so that the
tempfile directory is only cleaned up after all the necessary state
for pg_ctl is collected. Unfortunately the chosen location is after
the syslogger has been started; which normally is fine, except for
!WIN32 EXEC_BACKEND builds, which pass information to children via
files in the temp directory.
Move the call to RemovePgTempFiles() to just before the syslogger has
started. That's the first child we fork.
Luckily EXEC_BACKEND is pretty much only used by endusers on windows,
which has a separate method to pass information to children. That
means the real world impact of this bug is very small.
Discussion: 20150113182344.GF12272@alap3.anarazel.de
Backpatch to 9.1, just as the previous commit was.
|
|
Per testing with a compiler that whines about this.
|
|
I noticed the "vacuum" regression test taking really significantly longer
than it used to on a slow machine. Investigation pointed the finger at
commit e415b469b33ba328765e39fd62edcd28f30d9c3c, which added creation of
an index using an extremely expensive index function. That function was
evidently meant to be applied only twice ... but the test re-used an
existing test table, which up till a couple lines before that had had over
two thousand rows. Depending on timing of the concurrent regression tests,
the intervening VACUUMs might have been unable to remove those
recently-dead rows, and then the index build would need to create index
entries for them too, leading to the wrap_do_analyze() function being
executed 2000+ times not twice. Avoid this by using a different table
that is guaranteed to have only the intended two rows in it.
Back-patch to 9.0, like the commit that created the problem.
|
|
The mechanism added in commit dbdf9679d7d61b03a3bf73af9b095831b7010eb5
for associating the correct translation domain with errcontext strings
potentially fails in cases where errcontext() is used within an ereport()
macro. Such usage was not originally envisioned for errcontext(), but we
do have a few places that do it. In this situation, the intended comma
expression becomes just a couple of arguments to errfinish(), which the
compiler might choose to evaluate right-to-left.
Fortunately, in such cases the textdomain for the errcontext string must
be the same as for the surrounding ereport. So we can fix this by letting
errstart initialize context_domain along with domain; then it will have
the correct value no matter which order the calls occur in. (Note that
error stack callback functions are not invoked until errfinish, so normal
usage of errcontext won't affect what happens for errcontext calls within
the ereport macro.)
In passing, make sure that errcontext calls within the main backend set
context_domain to something non-NULL. This isn't a live bug because
NULL would select the current textdomain() setting which should be the
right thing anyway --- but it seems better to handle this completely
consistently with the regular domain field.
Per report from Dmitry Voronin. Backpatch to 9.3; before that, there
wasn't any attempt to ensure that errcontext strings were translated
in an appropriate domain.
|
|
Back in ed0b409, PGPROC was split and moved to static variables in
procarray.c, with procs in ProcArrayStruct replaced by an array of
integers representing process numbers (pgprocnos), with -1 indicating a
dead process which has yet to be removed. Access to procArray is
generally done under ProcArrayLock and therefore most code does not have
to concern itself with -1 entries.
However, MinimumActiveBackends intentionally does not take
ProcArrayLock, which means it has to be extra careful when accessing
procArray. Prior to ed0b409, this was handled by checking for a NULL
in the pointer array, but that check was no longer valid after the
split. Coverity pointed out that the check could never happen and so
it was removed in 5592eba. That didn't make anything worse, but it
didn't fix the issue either.
The correct fix is to check for pgprocno == -1 and skip over that entry
if it is encountered.
Back-patch to 9.2, since there can be attempts to access the arrays
prior to their start otherwise. Note that the changes prior to 9.4 will
look a bit different due to the change in 5592eba.
Note that MinimumActiveBackends only returns a bool for heuristic
purposes and any pre-array accesses are strictly read-only and so there
is no security implication and the lack of fields complaints indicates
it's very unlikely to run into issues due to this.
Pointed out by Noah.
|
|
Some users run their applications in chroot environments that lack an
/etc/passwd file. This means that the current UID's user name and home
directory are not obtainable. libpq used to be all right with that,
so long as the database role name to use was specified explicitly.
But commit a4c8f14364c27508233f8a31ac4b10a4c90235a9 broke such cases by
causing any failure of pg_fe_getauthname() to be treated as a hard error.
In any case it did little to advance its nominal goal of causing errors
in pg_fe_getauthname() to be reported better. So revert that and instead
put some real error-reporting code in place. This requires changes to the
APIs of pg_fe_getauthname() and pqGetpwuid(), since the latter had
departed from the POSIX-specified API of getpwuid_r() in a way that made
it impossible to distinguish actual lookup errors from "no such user".
To allow such failures to be reported, while not failing if the caller
supplies a role name, add a second call of pg_fe_getauthname() in
connectOptions2(). This is a tad ugly, and could perhaps be avoided with
some refactoring of PQsetdbLogin(), but I'll leave that idea for later.
(Note that the complained-of misbehavior only occurs in PQsetdbLogin,
not when using the PQconnect functions, because in the latter we will
never bother to call pg_fe_getauthname() if the user gives a role name.)
In passing also clean up the Windows-side usage of GetUserName(): the
recommended buffer size is 257 bytes, the passed buffer length should
be the buffer size not buffer size less 1, and any error is reported
by GetLastError() not errno.
Per report from Christoph Berg. Back-patch to 9.4 where the chroot
failure case was introduced. The generally poor reporting of errors
here is of very long standing, of course, but given the lack of field
complaints about it we won't risk changing these APIs further back
(even though they're theoretically internal to libpq).
|
|
For some reason I overlooked in GETTEXT_TRIGGERS that the right argument
be read by gettext in 7fcbf6a405ffc12a4546a25b98592ee6733783fc. This
will drop the translation percentages for the backend all the way back
to 9.3 ...
Problem reported by Heikki.
|
|
logical.c's StartupDecodingContext() forgot to check whether
XLogReaderAllocate() returns NULL indicating a memory allocation
failure. This could lead, although quite unlikely, lead to a NULL
pointer dereference.
This only applies to 9.4 as earlier versions don't do logical
decoding, and later versions don't return NULL after allocation
failures in XLogReaderAllocate().
Michael Paquier, with minor changes by me.
|
|
Darwin --enable-nls builds use a substitute setlocale() that may start a
thread. Buildfarm member orangutan experienced BackendList corruption
on account of different postmaster threads executing signal handlers
simultaneously. Furthermore, a multithreaded postmaster risks undefined
behavior from sigprocmask() and fork(). Emit LOG messages about the
problem and its workaround. Back-patch to 9.0 (all supported versions).
|
|
Typical server invocations already achieved that. Invalid locale
settings in the initial postmaster environment interfered, as could
malloc() failure. Setting "LC_MESSAGES=pt_BR.utf8 LC_ALL=invalid" in
the postmaster environment will now choose C-locale messages, not
Brazilian Portuguese messages. Most localized programs, including all
PostgreSQL frontend executables, do likewise. Users are unlikely to
observe changes involving locale categories other than LC_MESSAGES.
CheckMyDatabase() ensures that we successfully set LC_COLLATE and
LC_CTYPE; main() sets the remaining three categories to locale "C",
which almost cannot fail. Back-patch to 9.0 (all supported versions).
|
|
vacuum()'s static variable handling makes it non-reentrant; an ensuing
null pointer deference crashed the backend. Back-patch to 9.0 (all
supported versions).
|
|
When using a historic snapshot for logical decoding it can validly
happen that a relation that's in the relcache isn't visible to that
historic snapshot. E.g. if a newly created relation is referenced in
the query that uses the SQL interface for logical decoding and a
sinval reset occurs.
The earlier commit that fixed the error handling for that corner case
already improves the situation as a ERROR is better than hitting an
assertion... But it's obviously not good enough. So additionally
allow that case without an error if a historic snapshot is set up -
that won't allow an invalid entry to stay in the cache because it's a)
already marked invalid and will thus be rebuilt during the next access
b) the syscaches will be reset at the end of decoding.
There might be prettier solutions to handle this case, but all that we
could think of so far end up being much more complex than this quite
simple fix.
This fixes the assertion failures reported by the buildfarm (markhor,
tick, leech) after the introduction of new regression tests in
89fd41b390a4. The failure there weren't actually directly caused by
CLOBBER_CACHE_ALWAYS but the extraordinary long runtimes due to it
lead to sinval resets triggering the behaviour.
Discussion: 22459.1418656530@sss.pgh.pa.us
Backpatch to 9.4 where logical decoding was introduced.
|
|
The corner case where a relcache invalidation tried to rebuild the
entry for a referenced relation but couldn't find it in the catalog
wasn't correct.
The code tried to RelationCacheDelete/RelationDestroyRelation the
entry. That didn't work when assertions are enabled because the latter
contains an assertion ensuring the refcount is zero. It's also more
generally a bad idea, because by virtue of being referenced somebody
might actually look at the entry, which is possible if the error is
trapped and handled via a subtransaction abort.
Instead just error out, without deleting the entry. As the entry is
marked invalid, the worst that can happen is that the invalid (and at
some point unused) entry lingers in the relcache.
Discussion: 22459.1418656530@sss.pgh.pa.us
There should be no way to hit this case < 9.4 where logical decoding
introduced a bug that can hit this. But since the code for handling
the corner case is there it should do something halfway sane, so
backpatch all the the way back. The logical decoding bug will be
handled in a separate commit.
|
|
|
|
This never worked, I think. Per report from Marc Munro.
In passing, fix funny spacing in the COMMENT ON command as a result of
excess space in the "label" string.
|
|
Commit 0e5680f4737a9c6aa94aa9e77543e5de60411322 contained a thinko
mixing LOCKMODE with LockTupleMode. This caused misbehavior in the case
where a tuple is marked with a multixact with at most a FOR SHARE lock,
and another transaction tries to acquire a FOR NO KEY EXCLUSIVE lock;
this case should block but doesn't.
Include a new isolation tester spec file to explicitely try all the
tuple lock combinations; without the fix it shows the problem:
starting permutation: s1_begin s1_lcksvpt s1_tuplock2 s2_tuplock3 s1_commit
step s1_begin: BEGIN;
step s1_lcksvpt: SELECT * FROM multixact_conflict FOR KEY SHARE; SAVEPOINT foo;
a
1
step s1_tuplock2: SELECT * FROM multixact_conflict FOR SHARE;
a
1
step s2_tuplock3: SELECT * FROM multixact_conflict FOR NO KEY UPDATE;
a
1
step s1_commit: COMMIT;
With the fixed code, step s2_tuplock3 blocks until session 1 commits,
which is the correct behavior.
All other cases behave correctly.
Backpatch to 9.3, like the commit that introduced the problem.
|
|
As every error in mark_file_as_archived() will lead to a failure of
pg_basebackup the FD leak couldn't ever lead to a real problem. It
seems better to fix the leak anyway though, rather than silence
Coverity, as the usage of the function might get extended or copied at
some point in the future.
Pointed out by Coverity.
Backpatch to 9.2, like the relevant part of the previous patch.
|
|
WAL (and timeline history) files created by pg_basebackup did not
maintain the new base backup's archive status. That's currently not a
problem if the new node is used as a standby - but if that node is
promoted all still existing files can get archived again. With a high
wal_keep_segment settings that can happen a significant time later -
which is quite confusing.
Change both the backend (for the -x/-X fetch case) and pg_basebackup
(for -X stream) itself to always mark WAL/timeline files included in
the base backup as .done. That's in line with walreceiver.c doing so.
The verbosity of the pg_basebackup changes show pretty clearly that it
needs some refactoring, but that'd result in not be backpatchable
changes.
Backpatch to 9.1 where pg_basebackup was introduced.
Discussion: 20141205002854.GE21964@awork2.anarazel.de
|
|
Backpatch to 9.3 where src/common was introduce, because a bugfix that
needs to be backpatched, requires the function. Earlier branches will
have to duplicate the code.
|
|
At one point in the development of this feature, it was claimed that
allowing negative values would be useful to compensate for timezone
differences between master and slave servers. That was based on a mistaken
assumption that commit timestamps are recorded in local time; but of course
they're in UTC. Nor is a negative apply delay likely to be a sane way of
coping with server clock skew. However, the committed patch still treated
negative delays as doing something, and the timezone misapprehension
survived in the user documentation as well.
If recovery_min_apply_delay were a proper GUC we'd just set the minimum
allowed value to be zero; but for the moment it seems better to treat
negative settings as if they were zero.
In passing do some extra wordsmithing on the parameter's documentation,
including correcting a second misstatement that the parameter affects
processing of Restore Point records.
Issue noted by Michael Paquier, who also provided the code patch; doc
changes by me. Back-patch to 9.4 where the feature was introduced.
|
|
|
|
For simple boolean variables such as ON_ERROR_STOP, psql has for a long
time recognized variant spellings of "on" and "off" (such as "1"/"0"),
and it also made a point of warning you if you'd misspelled the setting.
But these conveniences did not exist for other keyword-valued variables.
In particular, though ECHO_HIDDEN and ON_ERROR_ROLLBACK include "on" and
"off" as possible values, none of the alternative spellings for those were
recognized; and to make matters worse the code would just silently assume
"on" was meant for any unrecognized spelling. Several people have reported
getting bitten by this, so let's fix it. In detail, this patch:
* Allows all spellings recognized by ParseVariableBool() for ECHO_HIDDEN
and ON_ERROR_ROLLBACK.
* Reports a warning for unrecognized values for COMP_KEYWORD_CASE, ECHO,
ECHO_HIDDEN, HISTCONTROL, ON_ERROR_ROLLBACK, and VERBOSITY.
* Recognizes all values for all these variables case-insensitively;
previously there was a mishmash of case-sensitive and case-insensitive
behaviors.
Back-patch to all supported branches. There is a small risk of breaking
existing scripts that were accidentally failing to malfunction; but the
consensus is that the chance of detecting real problems and preventing
future mistakes outweighs this.
|
|
Commit 36a35c55 changed the divisor from 3 to 6, for no apparent reason.
Reducing GinMaxItemSize like that created a dump/reload hazard: loading a
9.3 database to 9.4 might fail with "index row size XXX exceeds maximum 1352
for index ..." error. Revert the change.
While we're at it, make the calculation slightly more accurate. It used to
divide the available space on page by three, then subtract
sizeof(ItemIdData), and finally round down. That's not totally accurate; the
item pointers for the three items are packed tight right after the page
header, but there is alignment padding after the item pointers. Change the
calculation to reflect that, like BTMaxItemSize does. I tested this with
different block sizes on systems with 4- and 8-byte alignment, and the value
after the final MAXALIGN_DOWN was the same with both methods on all
configurations. So this does not make any difference currently, but let's be
tidy.
Also add a comment explaining what the macro does.
This fixes bug #12292 reported by Robert Thaler. Backpatch to 9.4, where the
bug was introduced.
|
|
Backpatch a9c22d1480aa8e6d97a000292d05ef2b31bbde4e to make future
backpatching easier.
Backpatch through 9.0
|
|
We were trying to acquire the lock even when we were subsequently
not sleeping in some other transaction, which opens us up unnecessarily
to deadlocks. In particular, this is troublesome if an update tries to
lock an updated version of a tuple and finds itself doing EvalPlanQual
update chain walking; more than two sessions doing this concurrently
will find themselves sleeping on each other because the HW tuple lock
acquisition in heap_lock_tuple called from EvalPlanQualFetch races with
the same tuple lock being acquired in heap_update -- one of these
sessions sleeps on the other one to finish while holding the tuple lock,
and the other one sleeps on the tuple lock.
Per trouble report from Andrew Sackville-West in
http://www.postgresql.org/message-id/20140731233051.GN17765@andrew-ThinkPad-X230
His scenario can be simplified down to a relatively simple
isolationtester spec file which I don't include in this commit; the
reason is that the current isolationtester is not able to deal with more
than one blocked session concurrently and it blocks instead of raising
the expected deadlock. In the future, if we improve isolationtester, it
would be good to include the spec file in the isolation schedule. I
posted it in
http://www.postgresql.org/message-id/20141212205254.GC1768@alvh.no-ip.org
Hat tip to Mark Kirkwood, who helped diagnose the trouble.
|
|
Windows versions later than Windows Server 2003 map "localhost" to ::1.
Account for that in the generated pg_hba.conf, fixing another oversight
in commit f6dc6dd5ba54d52c0733aaafc50da2fbaeabb8b0. Back-patch to 9.0,
like that commit.
David Rowley and Noah Misch
|
|
Back-patch to 9.4, where this problem was added.
|
|
For some reason this seems to have been missed when the lists in
src/timezone/tznames/ were first constructed. We can't put it in Default
because of the conflict with US CST, but we should certainly list it among
the alternative entries in Asia.txt. (I checked for other oversights, but
all the other abbreviations that are in current use according to the IANA
files seem to be accounted for.) Noted while responding to bug #12326.
|
|
|
|
We used time(null) to set a TimestampTz field, which gave bogus results.
Noticed while looking at pg_xlogdump output.
Backpatch to 9.3 and above, where the fast promotion was introduced.
|
|
In LWLockRelease() (and in 9.4+ LWLockUpdateVar()) we release enqueued
waiters using PGSemaphoreUnlock(). As there are other sources of such
unlocks backends only wake up if MyProc->lwWaiting is set to false;
which is only done in the aforementioned functions.
Before this commit there were dangers because the store to lwWaitLink
could become visible before the store to lwWaitLink. This could both
happen due to compiler reordering (on most compilers) and on some
platforms due to the CPU reordering stores.
The possible consequence of this is that a backend stops waiting
before lwWaitLink is set to NULL. If that backend then tries to
acquire another lock and has to wait there the list could become
corrupted once the lwWaitLink store is finally performed.
Add a write memory barrier to prevent that issue.
Unfortunately the barrier support has been only added in 9.2. Given
that the issue has not knowingly been observed in praxis it seems
sufficient to prohibit compiler reordering using volatile for 9.0 and
9.1. Actual problems due to compiler reordering are more likely
anyway.
Discussion: 20140210134625.GA15246@awork2.anarazel.de
|
|
Back-patch to 9.0 (all supported versions). This is mere
future-proofing in the context of the master branch, but commit
f6dc6dd5ba54d52c0733aaafc50da2fbaeabb8b0 requires it of older branches.
|
|
When starting up from a basebackup taken off a standby extra logic has
to be applied to compute the point where the data directory is
consistent. Normal base backups use a WAL record for that purpose, but
that isn't possible on a standby.
That logic had a error check ensuring that the cluster's control file
indicates being in recovery. Unfortunately that check was too strict,
disregarding the fact that the control file could also indicate that
the cluster was shut down while in recovery.
That's possible when the a cluster starting from a basebackup is shut
down before the backup label has been removed. When everything goes
well that's a short window, but when either restore_command or
primary_conninfo isn't configured correctly the window can get much
wider. That's because inbetween reading and unlinking the label we
restore the last checkpoint from WAL which can need additional WAL.
To fix simply also allow starting when the control file indicates
"shutdown in recovery". There's nicer fixes imaginable, but they'd be
more invasive.
Backpatch to 9.2 where support for taking basebackups from standbys
was added.
|
|
Per buildfarm member crake. Back-patch to 9.4, where the TAP suites
were introduced.
|
|
Use SSPI authentication to allow connections exclusively from the OS
user that launched the test suite. This closes on Windows the
vulnerability that commit be76a6d39e2832d4b88c0e1cc381aa44a7f86881
closed on other platforms. Users of "make installcheck" or custom test
harnesses can run "pg_regress --config-auth=DATADIR" to activate the
same authentication configuration that "make check" would use.
Back-patch to 9.0 (all supported versions).
Security: CVE-2014-0067
|
|
Spotted by Álvaro Herrera.
|
|
Adam Brightwell, per report from Martín Marqués.
|
|
Michael Paquier
|
|
MapArrayTypeName would copy up to NAMEDATALEN-1 bytes of the base type
name, which of course is wrong: after prepending '_' there is only room for
NAMEDATALEN-2 bytes. Aside from being the wrong result, this case would
lead to overrunning the statically allocated work buffer. This would be a
security bug if the function were ever used outside bootstrap mode, but it
isn't, at least not in any currently supported branches.
Aside from fixing the off-by-one loop logic, this patch gets rid of the
static work buffer by having MapArrayTypeName pstrdup its result; the sole
caller was already doing that, so this just requires moving the pstrdup
call. This saves a few bytes but mainly it makes the API a lot cleaner.
Back-patch on the off chance that there is some third-party code using
MapArrayTypeName with less-secure input. Pushing pstrdup into the function
should not cause any serious problems for such hypothetical code; at worst
there might be a short term memory leak.
Per Coverity scanning.
|
