| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
in the Global\ namespace, because it caused permission errors on
a lot of platforms.
We need to come up with something better for 8.4, but for now
revert to the pre-8.3.4 behaviour.
|
|
Argentina, Brazil, Mauritius, Syria).
|
|
|
|
Per gripe from Kevin Grittner. Backpatch to 8.3, where the bug was introduced.
|
|
recursion when we are unable to convert a localized error message to the
client's encoding. We've been over this ground before, but as reported by
Ibrar Ahmed, it still didn't work in the case of conversion failures for
the conversion-failure message itself :-(. Fix by installing a "circuit
breaker" that disables attempts to localize this message once we get into
recursion trouble.
Patch all supported branches, because it is in fact broken in all of them;
though I had to add some missing translations to the older branches in
order to expose the failure in the particular test case I was using.
|
|
treat Var and non-Var IN-list items differently. Only non-Var items are
candidates to go into an ANY(ARRAY) construct --- we put all Vars as separate
OR conditions on the grounds that that leaves more scope for optimization.
Per suggestion from Robert Haas.
|
|
into an OR of equality comparisons, rather than x = ANY(ARRAY[...]), when there
are Vars in the right-hand side. This avoids a performance regression compared
to pre-8.2 releases, in cases where the OR form can be optimized into scans
of multiple indexes. Limit the possible downside by preferring this form only
when the list isn't very long (I set the cutoff at 32 elements, which is a
bit arbitrary but in the right ballpark). Per discussion with Jim Nasby.
In passing, also make it try the OR form if it cannot select a common type
for the array elements; we've seen a complaint or two about how the OR form
worked for such cases and ARRAY doesn't.
|
|
address of afterTriggers->query_stack[afterTriggers->query_depth] and hung
onto it through all its firings of triggers. However, if a trigger causes
sufficiently many nested query executions, query_stack will get repalloc'd
bigger, leaving AfterTriggerEndQuery --- and hence afterTriggerInvokeEvents
--- using a stale pointer.
So far as I can find, the only consequence of this error is to stomp on a
couple of words of already-freed memory; which would lead to a failure only if
that chunk had already gotten re-allocated for something else. So it's hard
to exhibit a simple failure case, but this is surely a bug.
I noticed this while working on my recent patch to reduce pending-trigger
space usage. The present patch is mighty ugly, because it requires making
afterTriggerInvokeEvents know about all the possible event lists it might get
called on. Fortunately, this is only needed in back branches because CVS HEAD
avoids the problem in a different way: afterTriggerInvokeEvents only touches
the passed AfterTriggerEventList pointer once at startup. Back branches are
stable enough that wiring in knowledge of all possible call usages doesn't
seem like a killer problem.
Back-patch to 8.0. 7.4's trigger code is completely different and doesn't
seem to have the problem (it doesn't even use repalloc).
|
|
|
|
in 8.3. The list is quite outdated, and fixing it up would require more
effort. Plus, we don't want diverging information schema contents.
|
|
correctly set. As result, killtuple() marks as dead
wrong tuple on page. Bug was introduced by me while fixing
possible duplicates during GiST index scan.
|
|
|
|
Patch from Sushant Sinha <sushant354@gmail.com>
http://archives.postgresql.org/pgsql-hackers/2008-07/msg00785.php
|
|
is NULL but SK_SEARCHNULL is not set. Add checking IS NULL of keys
to set during key initialization. If key is NULL and SK_SEARCHNULL is not
set then nothnig can be satisfied.
With assert-enabled compilation that causes coredump.
Bug was introduced in 8.3 by support of IS NULL index scan.
|
|
In the previous coding, the list of columns that needed to be hashed on
was allocated in the per-query context, but we reallocated every time
the Agg node was rescanned. Since this information doesn't change over
a rescan, just construct the list of columns once during ExecInitAgg().
|
|
according to the TupleDesc's natts, not the number of physical columns in the
tuple. The previous coding would do the wrong thing in cases where natts is
different from the tuple's column count: either incorrectly report error when
it should just treat the column as null, or actually crash due to indexing off
the end of the TupleDesc's attribute array. (The second case is probably not
possible in modern PG versions, due to more careful handling of inheritance
cases than we once had. But it's still a clear lack of robustness here.)
The incorrect error indication is ignored by all callers within the core PG
distribution, so this bug has no symptoms visible within the core code, but
it might well be an issue for add-on packages. So patch all the way back.
|
|
Depesz Lubaczewski. In HEAD, also move a couple of other cases to make the
code ordering match up with ProcessUtility.
|
|
|
|
the isTrigger state explicitly, not rely on nonzero-ness of trigrelOid
to indicate trigger-hood, because trigrelOid will be left zero when compiling
for validation. The (useless) function hash entry built by the validator
was able to match an ordinary non-trigger call later in the same session,
thereby bypassing the check that is supposed to prevent such a call.
Per report from Alvaro.
It might be worth suppressing the useless hash entry altogether, but
that's a bigger change than I want to consider back-patching.
Back-patch to 8.0. 7.4 doesn't have the problem because it doesn't
have validation mode.
|
|
Report and fix by Michael McMaster. Some minor code beautification by me,
also avoid memory leaks in the special-case paths.
|
|
to process any pending unlinks for the source database.
Before, if you dropped a relation in the template database just before
CREATE DATABASE, and a checkpoint happened during copydir(), the checkpoint
might delete a file that we're just about to copy, causing lstat() in
copydir() to fail with ENOENT.
Backpatch to 8.3, where the pending unlinks were introduced.
Per report by Matthew Wakeling and analysis by Tom Lane.
|
|
use the old relfilenode in the new tablespace. There might be another relation
in the new tablespace with the same relfilenode, so we must generate a fresh
relfilenode in the new tablespace.
The 8.3 patch to let deleted relation files linger as zero-length files until
the next checkpoint made this more obvious: moving a relation from one table
space another, and then back again, caused a collision with the lingering
file.
Back-patch to 8.1. The issue is present in 8.0 as well, but it doesn't seem
worth fixing there, because we didn't have protection from OID collisions
after OID wraparound before 8.1.
Report by Guillaume Lelarge.
|
|
when using --enable-integer-datetimes and a non-ISO datestyle.
Ron Mayer
|
|
required by at least NetBSD.
Markus Schaaf
|
|
command-line options had been given to the postmaster; and just plain
broke it altogether in 8.1 and 8.0. Per report from KaiGai Kohei.
|
|
|
|
a SubLink expression into a rule query. We missed cases where the original
query contained a sub-SELECT in a function in FROM, a multi-row VALUES list,
or a RETURNING list. Per bug #4434 from Dean Rasheed and subsequent
investigation.
Back-patch to 8.1; older releases don't have the issue because they didn't
try to be smart about setting hasSubLinks only when needed.
|
|
with situtations when the file contains an EOF maker
(0x1A) on Windows.
ITAGAKI Takahiro
|
|
can be used from Slony functions.
Per report from Hiroshi Saito.
|
|
|
|
Argentina, Bahamas, Brazil, Mauritius, Morocco, Pakistan, Palestine, Paraguay).
|
|
forestalls potential overflow when the same table (or other object, but
usually tables) is accessed by very many successive queries within a single
transaction. Per report from Michael Milligan.
Back-patch to 8.0, which is as far back as the patch conveniently applies.
There have been no reports of overflow in pre-8.3 releases, but clearly the
risk existed all along. (Michael's report suggests that 8.3 may consume lock
counts faster than prior releases, but with no test case to look at it's hard
to be sure about that. Widening the counts seems a good future-proofing
measure in any event.)
|
|
|
|
we regenerate the SQL query text not merely the plan derived from it. This
is needed to handle contingencies such as renaming of a table or column
used in an FK. Pre-8.3, such cases worked despite the lack of replanning
(because the cached plan needn't actually change), so this is a regression.
Per bug #4417 from Benjamin Bihler.
|
|
btree. We can't easily tell whether clauses generated from the equivalence
class could be used with such an index, so just assume that they might be.
This bit of over-optimization prevented use of non-btree indexes for nestloop
inner indexscans, in any case where the join uses an equality operator that
is also a btree operator --- which in particular is typically true for hash
indexes. Noted while trying to test the current hash index patch.
|
|
GetOldestXmin() instead of RecentGlobalXmin; this is safer because we do not
depend on the latter being correctly set elsewhere, and while it is more
expensive, this code path is not performance-critical. This is a real
risk for autovacuum, because it can execute whole cycles without doing
a single vacuum, which would mean that RecentGlobalXmin would stay at its
initialization value, FirstNormalTransactionId, causing a bogus value to be
inserted in pg_database. This bug could explain some recent reports of
failure to truncate pg_clog.
At the same time, change the initialization of RecentGlobalXmin to
InvalidTransactionId, and ensure that it's set to something else whenever
it's going to be used. Using it as FirstNormalTransactionId in HOT page
pruning could incur in data loss. InitPostgres takes care of setting it
to a valid value, but the extra checks are there to prevent "special"
backends from behaving in unusual ways.
Per Tom Lane's detailed problem dissection in 29544.1221061979@sss.pgh.pa.us
|
|
Improves performance, per suggestion from Rudolf Leitgeb (bug #4414).
The backend did this right already, but not libpq.
|
|
whenever possible, as per bug report from Oleg Serov. While at it, reorder
the operations in the RECORD case to avoid possible palloc failure while the
variable update is only partly complete.
Back-patch as far as 8.1. Although the code of the particular function is
similar in 8.0, 8.0's support for composite fields in rows is sufficiently
broken elsewhere that it doesn't seem worth fixing this.
|
|
command id is the cmin, when it can in fact be a combo cid. That made rows
incorrectly invisible to a transaction where a tuple was deleted by multiple
aborted subtransactions.
Report and patch Karl Schnaitter. Back-patch to 8.3, where combo cids was
introduced.
|
|
a target type that isn't acceptable, the code failed to raise the proper
error. The result instead was to return a NULL expression tree, which
in a quick test led to a 'cache lookup failed for type 0' error later.
Patch 8.3 only --- I fixed this in HEAD as part of recent locations patch.
|
|
when its input is constant and the element coercion function is immutable
(or nonexistent, ie, binary-coercible case). This is an oversight in the
8.3 implementation of ArrayCoerceExpr, and its result is that certain cases
involving IN or NOT IN with constants don't get optimized as they should be.
Per experimentation with an example from Ow Mun Heng.
|
|
at once and ItemPointers are collected in memory.
Remove tuple's killing by killtuple() if tuple was moved to another
page - it could produce unaceptable overhead.
Backpatch up to 8.1 because the bug was introduced by GiST's concurrency support.
|
|
|
|
Per Microsoft knowledge base article Q201213, early versions of
Windows fail when we do this. Later versions of Windows appear
to have a higher limit than 64Kb, but do still fail on large
sends, so we unconditionally limit it for all versions.
Patch from Tom Lane.
|
|
returns NULL instead of a PGresult. The former coding would fail, which
is OK, but it neglected to give you the PQerrorMessage that might tell
you why. In the oldest branches, there was another problem: it'd sometimes
report PQerrorMessage from the wrong connection.
|
|
|
|
parent, not only those with RangeTblRefs. We need them in ExecCheckRTPerms.
Report by Brendan O'Shea. Back-patch to 8.2, where pull_up_simple_union_all
was introduced.
|
|
REINDEX DATABASE including same) is done before a session has done any other
update on pg_class, the pg_class relcache entry was left with an incorrect
setting of rd_indexattr, because the indexed-attributes set would be first
demanded at a time when we'd forced a partial list of indexes into the
pg_class entry, and it would remain cached after that. This could result
in incorrect decisions about HOT-update safety later in the same session.
In practice, since only pg_class_relname_nsp_index would be missed out,
only ALTER TABLE RENAME and ALTER TABLE SET SCHEMA could trigger a problem.
Per report and test case from Ondrej Jirman.
|
