| Age | Commit message (Collapse) | Author |
|---|
|
expandRecordVariable() failed to adjust the parse nesting structure
correctly when recursing to inspect an outer-level Var. This could
result in assertion failures or core dumps in corner cases.
Likewise, get_name_for_var_field() failed to adjust the deparse
namespace stack correctly when recursing to inspect an outer-level
Var. In this case the likely result was a "bogus varno" error
while deparsing a view.
Per bug #18077 from Jingzhou Fu. Back-patch to all supported
branches.
Richard Guo, with some adjustments by me
Discussion: https://postgr.es/m/18077-b9db97c6e0ab45d8@postgresql.org
|
|
This reverts commit a0d87bcd9b57, following a remark from Andres Frend
that the new error can be triggered with an incorrect SET TRANSACTION
SNAPSHOT command without being really helpful for the user as it uses
the internal file name.
Discussion: https://postgr.es/m/20230914020724.hlks7vunitvtbbz4@awork3.anarazel.de
Backpatch-through: 11
|
|
When a snapshot file fails to be read in ImportSnapshot(), it would
issue an ERROR as "invalid snapshot identifier" when opening a stream
for it in read-only mode. This error message is reworded to be the same
as all the other messages used in this case on failure, which is useful
when debugging this area.
Thinko introduced by bb446b689b66 where snapshot imports have been
added. A backpatch down to 11 is done as this can improve any work
related to snapshot imports in older branches.
Author: Bharath Rupireddy
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CALj2ACWmr=3KdxDkm8h7Zn1XxBoF6hdzq8WQyMn2y1OL5RYFrg@mail.gmail.com
Backpatch-through: 11
|
|
Both 50e17ad28 and 29f45e299 mistakenly tried to record a plan dependency
on a function but mistakenly inverted the OidIsValid test. This meant
that we'd record a dependency only when the function's Oid was
InvalidOid. Clearly this was meant to *not* record the dependency in
that case.
50e17ad28 made this mistake first, then in v15 29f45e299 copied the same
mistake.
Reported-by: Tom Lane
Backpatch-through: 14, where 50e17ad28 first made this mistake
Discussion: https://postgr.es/m/2277537.1694301772@sss.pgh.pa.us
|
|
If an out-of-memory error was thrown at an unfortunate time,
ensure_record_cache_typmod_slot_exists() could leak memory and leave
behind a global state that produced an infinite loop on the next call.
Fix by merging RecordCacheArray and RecordIdentifierArray into a single
array. With only one allocation or re-allocation, there is no
intermediate state.
Back-patch to all supported releases.
Reported-by: "James Pang (chaolpan)" <chaolpan@cisco.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/PH0PR11MB519113E738814BDDA702EDADD6EFA%40PH0PR11MB5191.namprd11.prod.outlook.com
|
|
The transactions and subtransactions array that was allocated under
snapshot builder memory context and recorded during decoding was not
cleared in case of errors. This can result in an assertion failure if we
attempt to retry logical decoding within the same session. To address this
issue, we register a callback function under the snapshot builder memory
context to clear the recorded transactions and subtransactions array along
with the context.
This problem doesn't exist in PG16 and HEAD as instead of using
InitialRunningXacts, we added the list of transaction IDs and
sub-transaction IDs, that have modified catalogs and are running during
snapshot serialization, to the serialized snapshot (see commit 7f13ac8123).
Author: Hou Zhijie
Reviewed-by: Amit Kapila
Backpatch-through: 11
Discussion: http://postgr.es/m/18055-ab3beed9f4b7b7d6@postgresql.org
|
|
Commit 0668719801 changed XLogPageRead() so that it validated the page
header, if invalid page header was found reset the error message and
retried reading the page, to fix the scenario where streaming standby
got stuck at a continuation record. This change hid the error message
about invalid page header, which would make it harder for users to
investigate what the actual issue was found in WAL.
To fix the issue, this commit makes XLogPageRead() report the error
message when invalid page header is found.
When not in standby mode, an invalid page header should cause recovery
to end, not retry reading the page, so XLogPageRead() doesn't need to
validate the page header for the retry. Instead, ReadPageInternal() should
be responsible for the validation in that case. Therefore this commit
changes XLogPageRead() so that if not in standby mode it doesn't validate
the page header for the retry.
This commit has been originally pushed as of 68601985e699 for 15 and
newer versions, but not to the older branches. A recent investigation
related to WAL replay failures has showed up that the lack of this patch
in 12~14 is an issue, as we want to be able to improve the WAL reader to
make a correct distinction between the end-of-wal and OOM cases when
validating record headers. REL_11_STABLE is left out as it will be
EOL'd soon.
Reported-by: Yugo Nagata
Author: Yugo Nagata, Kyotaro Horiguchi
Reviewed-by: Ranier Vilela, Fujii Masao
Discussion: https://postgr.es/m/20210718045505.32f463ed6c227111038d8ae4@sraoss.co.jp
Discussion: https://postgr.es/m/17928-aa92416a70ff44a2@postgresql.org
Backpatch-through: 12
|
|
pgbouncer can cause PQbackendPID() to return negative values due to it
filling be_pid with random bytes (even these days pid_max can only be
set up to 2^22 on 64b machines on Linux, for example, so this cannot
happen with normal PID numbers). When this happens, pg_basebackup may
generate a temporary slot name that may not be accepted by the parser,
leading to spurious failures, like:
pg_basebackup: error: could not send replication command
ERROR: replication slot name "pg_basebackup_-1201966863" contains
invalid character
This commit fixes that problem by formatting the result from
PQbackendPID() as an unsigned integer when creating the temporary
replication slot name, so as the invalid character is gone and the
command can be parsed.
Author: Jelte Fennema
Reviewed-by: Daniel Gustafsson, Nishant Sharma
Discussion: https://postgr.es/m/CAGECzQQOGvYfp8ziF4fWQ_o8s2K7ppaoWBQnTmdakn3s-4Z=5g@mail.gmail.com
Backpatch-through: 11
|
|
This could lead to an imprecise choice when splitting an index page of a
GiST index on a tsvector, deciding which entries should remain on the
old page and which entries should move to a new page.
This is wrong since tsearch2 has been moved into core with commit
140d4ebcb46e, so backpatch all the way down. This error has been
spotted by valgrind.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/17950-6c80a8d2b94ec695@postgresql.org
Backpatch-through: 11
|
|
nFreeBlocks, defined as a long, stores the number of free blocks in a
logical tape. ltsGetFreeBlock() has been using an int to store the
value of nFreeBlocks, which could lead to overflows on platforms where
long and int are not the same size (in short everything except Windows
where long is 4 bytes).
The problematic intermediate variable is switched to be a long instead
of an int.
Issue introduced by c02fdc9223015, so backpatch down to 13.
Author: Ranier vilela
Reviewed-by: Peter Geoghegan, David Rowley
Discussion: https://postgr.es/m/CAEudQApLDWCBR_xmwNjGBrDo+f+S4E87x3s7-+hoaKqYdtC4JQ@mail.gmail.com
Backpatch-through: 13
|
|
After commit b0bea38705, syslogger prints 63 warnings about failing to
close a listen socket at postmaster startup. That's because the
syslogger process forks before the ListenSockets array is initialized,
so ClosePostmasterPorts() calls "close(0)" 64 times. The first call
succeeds, because fd 0 is stdin.
This has been like this since commit 9a86f03b4e in version 13, which
moved the SysLogger_Start() call to before initializing ListenSockets.
We just didn't notice until commit b0bea38705 added the LOG message.
Reported by Michael Paquier and Jeff Janes.
Author: Michael Paquier
Discussion: https://www.postgresql.org/message-id/ZOvvuQe0rdj2slA9%40paquier.xyz
Discussion: https://www.postgresql.org/message-id/ZO0fgDwVw2SUJiZx@paquier.xyz#482670177eb4eaf4c9f03c1eed963e5f
Backpatch-through: 13
|
|
Revalidation of a plancache entry (after a cache invalidation event)
requires acquiring a snapshot. Normally that is harmless, but not
if the cached statement is one that needs to run without acquiring a
snapshot. We were already aware of that for TransactionStmts,
but for some reason hadn't extrapolated to the other statements that
PlannedStmtRequiresSnapshot() knows mustn't set a snapshot. This can
lead to unexpected failures of commands such as SET TRANSACTION
ISOLATION LEVEL. We can fix it in the same way, by excluding those
command types from revalidation.
However, we can do even better than that: there is no need to
revalidate for any statement type for which parse analysis, rewrite,
and plan steps do nothing interesting, which is nearly all utility
commands. To mechanize this, invent a parser function
stmt_requires_parse_analysis() that tells whether parse analysis does
anything beyond wrapping a CMD_UTILITY Query around the raw parse
tree. If that's what it does, then rewrite and plan will just
skip the Query, so that it is not possible for the same raw parse
tree to produce a different plan tree after cache invalidation.
stmt_requires_parse_analysis() is basically equivalent to the
existing function analyze_requires_snapshot(), except that for
obscure reasons that function omits ReturnStmt and CallStmt.
It is unclear whether those were oversights or intentional.
I have not been able to demonstrate a bug from not acquiring a
snapshot while analyzing these commands, but at best it seems mighty
fragile. It seems safer to acquire a snapshot for parse analysis of
these commands too, which allows making stmt_requires_parse_analysis
and analyze_requires_snapshot equivalent.
In passing this fixes a second bug, which is that ResetPlanCache
would exclude ReturnStmts and CallStmts from revalidation.
That's surely *not* safe, since they contain parsable expressions.
Per bug #18059 from Pavel Kulakov. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18059-79c692f036b25346@postgresql.org
|
|
Attribute missing values might be needed past the lifetime of the tuple
descriptors from which they are extracted. To avoid possibly using
pointers for by-reference values which might thus be left dangling, we
cache a datumCopy'd version of the datum in the TopMemoryContext. Since
we first search for the value this only needs to be done once per
session for any such value.
Original complaint from Tom Lane, idea for mitigation by Andrew Dunstan,
tweaked by Tom Lane.
Backpatch to version 11 where missing values were introduced.
Discussion: https://postgr.es/m/1306569.1687978174@sss.pgh.pa.us
|
|
The fix itself is fine, but the test revealed other problems related
to parallel query that are not easily fixable. Remove the test for
now to fix the buildfarm.
Discussion: https://postgr.es/m/88825.1691665432@sss.pgh.pa.us
Backpatch-through: 11
|
|
Renaming a role can affect the meaning of the special string $user, so
must cause search_path to be recalculated.
Discussion: https://postgr.es/m/186761d32c0255debbdf50b6310b581b9c973e6c.camel@j-davis.com
Reviewed-by: Nathan Bossart, Michael Paquier
Backpatch-through: 11
|
|
Substituting such values in extension scripts facilitated SQL injection
when @extowner@, @extschema@, or @extschema:...@ appeared inside a
quoting construct (dollar quoting, '', or ""). No bundled extension was
vulnerable. Vulnerable uses do appear in a documentation example and in
non-bundled extensions. Hence, the attack prerequisite was an
administrator having installed files of a vulnerable, trusted,
non-bundled extension. Subject to that prerequisite, this enabled an
attacker having database-level CREATE privilege to execute arbitrary
code as the bootstrap superuser. By blocking this attack in the core
server, there's no need to modify individual extensions. Back-patch to
v11 (all supported versions).
Reported by Micah Gate, Valerie Woolard, Tim Carey-Smith, and Christoph
Berg.
Security: CVE-2023-39417
|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 2ac4b26db0a9032bce0eb018f6f742cea5847118
|
|
The use of Memoize was already disabled in normal joins when the join
conditions had volatile functions per the code in
match_opclause_to_indexcol(). Ordinarily, the parameterization for the
inner side of a nested loop will be an Index Scan or at least eventually
lead to an index scan (perhaps nested several joins deep). However, for
lateral joins, that's not the case and seq scans can be parameterized
too, so we can't rely on match_opclause_to_indexcol().
Here we explicitly check the parameterization for volatile functions and
don't consider the generation of a Memoize path when such functions
are present.
Author: Richard Guo
Discussion: https://postgr.es/m/CAMbWs49nHFnHbpepLsv_yF3qkpCS4BdB-v8HoJVv8_=Oat0u_w@mail.gmail.com
Backpatch-through: 14, where Memoize was introduced
|
|
Commit e7cb7ee14 allowed custom scan providers to create CustomPath
paths for join relations as well, but missed updating the comments.
Back-patch to all supported branches.
Discussion: https://postgr.es/m/CAPmGK15ODkN%2B%3DhkBCufj1HBW0x5OTb65Xuy7ryXchMdiCMpx_g%40mail.gmail.com
|
|
Commit 7259736a6 updated the comment but it was not correct since
ReorderBufferLargestStreamableTopTXN() returns only top-level
transactions.
Reviewed-by: Amit Kapila
Discussion: https://postgr.es/m/CAD21AoA9XB7OR86BqvrCe2dMYX%2BZv3-BvVmjF%3DGY2z6jN-kqjg%40mail.gmail.com
Backpatch-through: 14
|
|
This was failing for queries which try to get the .type() of a
jpiLikeRegex. For example:
select jsonb_path_query('["string", "string"]',
'($[0] like_regex ".{7}").type()');
Reported-by: Alexander Kozhemyakin
Bug: #18035
Discussion: https://postgr.es/m/18035-64af5cdcb5adf2a9@postgresql.org
Backpatch-through: 12, where SQL/JSON path was added.
|
|
Commit e7cb7ee14, which introduced the infrastructure for FDWs and
custom scan providers to replace joins with scans, failed to add support
handling of pseudoconstant quals assigned to replaced joins in
createplan.c, leading to an incorrect plan without a gating Result node
when postgres_fdw replaced a join with such a qual.
To fix, we could add the support by 1) modifying the ForeignPath and
CustomPath structs to store the list of RestrictInfo nodes to apply to
the join, as in JoinPaths, if they represent foreign and custom scans
replacing a join with a scan, and by 2) modifying create_scan_plan() in
createplan.c to use that list in that case, instead of the
baserestrictinfo list, to get pseudoconstant quals assigned to the join;
but #1 would cause an ABI break. So fix by modifying the infrastructure
to just disallow replacing joins with such quals.
Back-patch to all supported branches.
Reported by Nishant Sharma. Patch by me, reviewed by Nishant Sharma and
Richard Guo.
Discussion: https://postgr.es/m/CADrsxdbcN1vejBaf8a%2BQhrZY5PXL-04mCd4GDu6qm6FigDZd6Q%40mail.gmail.com
|
|
Historically, hba.c limited tokens in the authentication configuration
files (pg_hba.conf and pg_ident.conf) to less than 256 bytes. We have
seen a few reports of this limit causing problems; notably, for
moderately-complex LDAP configurations. Increase the limit to 10240
bytes as a low-risk stop-gap solution.
In v13 and earlier, this also requires raising MAX_LINE, the limit
on overall line length. I'm hesitant to make this code consume
too much stack space, so I only raised that to 20480 bytes.
Discussion: https://postgr.es/m/1588937.1690221208@sss.pgh.pa.us
|
|
If both the passed-in plan pointer and plansource->gplan are
NULL, CachedPlanIsSimplyValid would think that the plan pointer
is possibly-valid and try to dereference it. For the one extant
call site in plpgsql, this situation doesn't normally happen
which is why we've not noticed. However, it appears to be possible
if the previous use of the cached plan failed, as per report from
Justin Pryzby. Add an extra check to prevent crashing.
Back-patch to v13 where this code was added.
Discussion: https://postgr.es/m/ZLlV+STFz1l/WhAQ@telsasoft.com
|
|
This has been missed in cb0cca1, noticed before buildfarm member koel
has been able to complain while poking at a different patch. Like the
other commit, backpatch all the way down to limit the odds of merge
conflicts.
Backpatch-through: 11
|
|
A crash in the middle of a checkpoint with some two-phase state data
already flushed to disk by this checkpoint could cause a follow-up crash
recovery to recover twice the same transaction, once from what has been
found in pg_twophase/ at the beginning of recovery and a second time
when replaying its corresponding record.
This would lead to FATAL failures in the startup process during
recovery, where the same transaction would have a state recovered twice
instead of once:
LOG: recovering prepared transaction 731 from shared memory
LOG: recovering prepared transaction 731 from shared memory
FATAL: lock ExclusiveLock on object 731/0/0 is already held
This issue is fixed by skipping the addition of any 2PC state coming
from a record whose equivalent 2PC state file has already been loaded in
TwoPhaseState at the beginning of recovery by restoreTwoPhaseData(),
which is OK as long as the system has not reached a consistent state.
The timing to get a messed up recovery processing is very racy, and
would very unlikely happen. The thread that has reported the issue has
demonstrated the bug using injection points to force a PANIC in the
middle of a checkpoint.
Issue introduced in 728bd99, so backpatch all the way down.
Reported-by: "suyu.cmj" <mengjuan.cmj@alibaba-inc.com>
Author: "suyu.cmj" <mengjuan.cmj@alibaba-inc.com>
Author: Michael Paquier
Discussion: https://postgr.es/m/109e6994-b971-48cb-84f6-829646f18b4c.mengjuan.cmj@alibaba-inc.com
Backpatch-through: 11
|
|
RelationReloadIndexInfo() is a fast-path used for index reloads in the
relation cache, and it has always forgotten about updating
indisreplident, which is something that would happen after an index is
selected for a replica identity. This can lead to incorrect cache
information provided when executing a command in a transaction context
that updates indisreplident.
None of the code paths currently on HEAD that need to check upon
pg_index.indisreplident fetch its value from the relation cache, always
relying on a fresh copy on the syscache. Unfortunately, this may not be
the case of out-of-core code, that could see out-of-date value.
Author: Shruthi Gowda
Reviewed-by: Robert Haas, Dilip Kumar, Michael Paquier
Discussion: https://postgr.es/m/CAASxf_PBcxax0wW-3gErUyftZ0XrCs3Lrpuhq4-Z3Fak1DoW7Q@mail.gmail.com
Backpatch-through: 11
|
|
indisvalid is switched to true for partitioned indexes when all its
partitions have valid indexes when attaching a new partition, up to the
top-most parent if all its leaves are themselves valid when dealing with
multiple layers of partitions.
The copy of the tuple from pg_index used to switch indisvalid to true
came from the relation cache, which is incorrect. Particularly, in the
case reported by Shruthi Gowda, executing a series of commands in a
single transaction would cause the validation of partitioned indexes to
use an incorrect version of a pg_index tuple, as indexes are reloaded
after an invalidation request with RelationReloadIndexInfo(), a much
faster version than a full index cache rebuild. In this case, the
limited information updated in the cache leads to an incorrect version
of the tuple used. One of the symptoms reported was the following
error, with a replica identity update, for instance:
"ERROR: attempted to update invisible tuple"
This is incorrect since 8b08f7d, so backpatch all the way down.
Reported-by: Shruthi Gowda
Author: Michael Paquier
Reviewed-by: Shruthi Gowda, Dilip Kumar
Discussion: https://postgr.es/m/CAASxf_PBcxax0wW-3gErUyftZ0XrCs3Lrpuhq4-Z3Fak1DoW7Q@mail.gmail.com
Backpatch-through: 11
|
|
Until now, when DROP DATABASE got interrupted in the wrong moment, the removal
of the pg_database row would also roll back, even though some irreversible
steps have already been taken. E.g. DropDatabaseBuffers() might have thrown
out dirty buffers, or files could have been unlinked. But we continued to
allow connections to such a corrupted database.
To fix this, mark databases invalid with an in-place update, just before
starting to perform irreversible steps. As we can't add a new column in the
back branches, we use pg_database.datconnlimit = -2 for this purpose.
An invalid database cannot be connected to anymore, but can still be
dropped.
Unfortunately we can't easily add output to psql's \l to indicate that some
database is invalid, it doesn't fit in any of the existing columns.
Add tests verifying that a interrupted DROP DATABASE is handled correctly in
the backend and in various tools.
Reported-by: Evgeny Morozov <postgresql3@realityexists.net>
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/20230509004637.cgvmfwrbht7xm7p6@awork3.anarazel.de
Discussion: https://postgr.es/m/20230314174521.74jl6ffqsee5mtug@awork3.anarazel.de
Backpatch: 11-, bug present in all supported versions
|
|
When vac_truncate_clog() encounters bogus datfrozenxid / datminmxid values, it
returns early. Unfortunately, until now, it did not release
WrapLimitsVacuumLock. If the backend later tries to acquire
WrapLimitsVacuumLock, the session / autovacuum worker hangs in an
uncancellable way. Similarly, other sessions will hang waiting for the
lock. However, if the backend holding the lock exited or errored out for some
reason, the lock was released.
The bug was introduced as a side effect of 566372b3d643.
It is interesting that there are no production reports of this problem. That
is likely due to a mix of bugs leading to bogus values having gotten less
common, process exit releasing locks and instances of hangs being hard to
debug for "normal" users.
Discussion: https://postgr.es/m/20230621221208.vhsqgduwfpzwxnpg@awork3.anarazel.de
|
|
Since PostgresMain calls sigsetjmp, any local variables that are not
marked "volatile" have a risk of unspecified behavior. In practice
this means that when control returns via longjmp, such variables might
get reset to their values as of the time of sigsetjmp, depending on
whether the compiler chose to put them in registers or on the stack.
We were careful about this for "send_ready_for_query", but not the
other local variables.
In the case of the timeout_enabled flags, resetting them to
their initial "false" states is actually good, since we do
"disable_all_timeouts()" in the longjmp cleanup code path. If that
does not happen, we risk uselessly calling "disable_timeout()" later,
which is harmless but a little bit expensive. Let's explicitly reset
these flags so that the behavior is correct and platform-independent.
(This change means that we really don't need the new "volatile"
markings after all, but let's install them anyway since any change
in this logic could re-introduce a problem.)
There is no issue for "firstchar" and "input_message" because those
are explicitly reinitialized each time through the query processing
loop. To make that clearer, move them to be declared inside the loop.
That leaves us with all the function-lifespan locals except the
sigjmp_buf itself marked as volatile, which seems like a good policy
to have going forward.
Because of the possibility of extra disable_timeout() calls, this
seems worth back-patching.
Sergey Shinderuk and Tom Lane
Discussion: https://postgr.es/m/2eda015b-7dff-47fd-d5e2-f1a9899b90a6@postgrespro.ru
|
|
As coded, the code would use as a base comparison the namespace OID from
the first object scanned in pg_depend when switching its namespace
dependency entry to the new one, and use it as a base of comparison for
any follow-up checks. It would also be used as the old namespace OID to
switch *from* for the extension's pg_depend entry. Hence, if the first
object scanned has a namespace different than the one stored in the
extension, we would finish by:
- Not checking that the extension objects map with the extension's
schema.
- Not switching the extension -> namespace dependency entry to the new
namespace provided by the user, making ALTER EXTENSION ineffective.
This issue exists since this command has been introduced in d9572c4 for
relocatable extension, so backpatch all the way down to 11. The test
case has been provided by Heikki, that I have tweaked a bit to show the
effects on pg_depend for the extension.
Reported-by: Heikki Linnakangas
Author: Michael Paquier, Heikki Linnakangas
Discussion: https://postgr.es/m/20eea594-a05b-4c31-491b-007b6fceef28@iki.fi
Backpatch-through: 11
|
|
Commit e213de8e78 fixed a problem with path lengths to a tempdir on
Windows, but caused problems on at least some Unix systems where the
system tempdir is on a different file system. To work around this, only
used the system temdir for the destination of pg_replslot on Windows,
and otherwise restore the old behaviour.
Backpatch to relase 14 like the previous patch.
Problem exposed by a myriad of buildfarm animals.
|
|
The symlink to a longer location tripped up some Windows limit on
buildfarm animal fairywren when running with meson, which uses slightly
longer paths.
Backpatch to release 14 to keep the script in sync. Before that the
script skipped all symlink related tests on Windows.
|
|
Also add comment to make the reasoning behind the Assert() more explicit (per
Tom).
Reported-by: Ranier Vilela
Discussion: https://postgr.es/m/CAEudQAocXNJ6s1VLz+hMamLAQAiewRoW17OJ6-+9GACKfj6iPQ@mail.gmail.com
Backpatch: 11-
|
|
On Windows, it's sometimes difficult to create a file with a path longer
than 255 chars, and if it can be created it might not be seen by the
archiver. This can be triggered by the test for tar backups with
filenames greater than 100 bytes. So we skip that test if the path would
exceed 255.
Backpatch to all live branches.
Reviewed by Daniel Gustafsson
Discussion: https://postgr.es/m/666ac55b-3400-fb2c-2cea-0281bf36a53c@dunslane.net
|
|
We create a file, so we better WAL-log it. In practice, all the
built-in index AMs and all extensions that I'm aware of write a
metapage to the init fork, which is WAL-logged, and replay of the
metapage implicitly creates the fork too. But if ambuildempty() didn't
write any page, we would miss it.
This can be seen with dummy_index_am. Set up replication, create a
'dummy_index_am' index on an unlogged table, and look at the files
created in the replica: the init fork is not created on the
replica. Dummy_index_am doesn't do anything with the relation files,
however, so it doesn't lead to any user-visible errors.
Backpatch to all supported versions.
Reviewed-by: Robert Haas
Discussion: https://www.postgresql.org/message-id/6e5bbc08-cdfc-b2b3-9e23-1a914b9850a9%40iki.fi
|
|
group members.
This commit reverts the work done by commits 3ba59ccc89 and 72e78d831a.
Those commits were incorrect in asserting that we never acquire any other
heavy-weight lock after acquring page lock other than relation extension
lock. We can acquire a lock on catalogs while doing catalog look up after
acquring page lock.
This won't impact any existing feature but we need to think some other way
to achieve this before parallelizing other write operations or even
improving the parallelism in vacuum (like allowing multiple workers
for an index).
Reported-by: Jaime Casanova
Author: Amit Kapila
Backpatch-through: 13
Discussion: https://postgr.es/m/CAJKUy5jffnRKNvRHKQ0LynRb0RJC-o4P8Ku3x9vGAVLwDBWumQ@mail.gmail.com
|
|
llvm_release_context() called llvm_enter_fatal_on_oom(), but was missing
the corresponding llvm_leave_fatal_on_oom() call. As a result, if JIT was
used at all, we were almost always in the "fatal-on-oom" state.
It only makes a difference if you use an extension written in C++, and
run out of memory in a C++ 'new' call. In that case, you would get a
PostgreSQL FATAL error, instead of the default behavior of throwing a
C++ exception.
Back-patch to all supported versions.
Reviewed-by: Daniel Gustafsson
Discussion: https://www.postgresql.org/message-id/54b78cca-bc84-dad8-4a7e-5b56f764fab5@iki.fi
|
|
If you create a table and don't insert any data into it, the relation file
is never fsync'd. You don't lose data, because an empty table doesn't have
any data to begin with, but if you crash and lose the file, subsequent
operations on the table will fail with "could not open file" error.
To fix, register an fsync request in mdcreate(), like we do for mdwrite().
Per discussion, we probably should also fsync the containing directory
after creating a new file. But that's a separate and much wider issue.
Backpatch to all supported versions.
Reviewed-by: Andres Freund, Thomas Munro
Discussion: https://www.postgresql.org/message-id/d47d8122-415e-425c-d0a2-e0160829702d%40iki.fi
|
|
The Homebrew package manager changed its default installation prefix
for the new architecture, so a couple of tests need tweaks to find
binaries.
This is a partial backpatch of dc513bc654.
|
|
It's OK to be lazy about re-binning memory segments when allocating,
because that can only leave segments in a bin that's too high. We'll
search higher bins if necessary while allocating next time, and
also eventually re-bin, so no memory can become unreachable that way.
However, when freeing memory, the largest contiguous range of free pages
might go up, so we should re-bin eagerly to make sure we don't leave the
segment in a bin that is too low for get_best_segment() to find.
The re-binning code is moved into a function of its own, so it can be
called whenever free pages are returned to the segment's free page map.
Back-patch to all supported releases.
Author: Dongming Liu <ldming101@gmail.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com> (earlier version)
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/CAL1p7e8LzB2LSeAXo2pXCW4%2BRya9s0sJ3G_ReKOU%3DAjSUWjHWQ%40mail.gmail.com
|
|
The ginfast.c code previously checked for conflicts in before locking
the relevant buffer, leaving a window where a RW conflict could be
missed. Re-order.
There was also a place where buffer ID and block number were confused
while trying to predicate-lock a page, noted by visual inspection.
Back-patch to all supported releases. Fixes one more problem discovered
with the reproducer from bug #17949, in this case when Dmitry tried
other index types.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reported-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
|
|
When performing a bitmap heap scan, we don't want to miss concurrent
writes that occurred after we observed the heap's rs_nblocks, but before
we took predicate locks on index pages. Therefore, we can't skip
fetching any heap tuples that are referenced by the index, because we
need to test them all with CheckForSerializableConflictOut(). The
old optimization that would ignore any references to blocks >=
rs_nblocks gets in the way of that requirement, because it means that
concurrent writes in that window are ignored.
Removing that optimization shouldn't affect correctness at any isolation
level, because any new tuples shouldn't be visible to an MVCC snapshot.
There also shouldn't be any error-causing references to heap blocks past
the end, because we should have held at least an AccessShareLock on the
table before the index scan. It can't get smaller while our transaction
is running. For now, though, we'll keep the optimization at lower
levels to avoid making unnecessary changes in a bug fix.
Back-patch to all supported releases. In release 11, the code is in a
different place but not fundamentally different. Fixes one aspect of
bug #17949.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
|
|
When predicate-locking btrees, we have a special case for completely
empty btrees, since there is no page to lock. This was racy, because,
without buffer lock held, a matching key could be inserted between the
_bt_search() and the PredicateLockRelation() calls.
Fix, by rechecking _bt_search() after taking the relation-level SIREAD
lock, if using SERIALIZABLE isolation and an empty btree is discovered.
Back-patch to all supported releases. Fixes one aspect of bug #17949.
Reported-by: Artem Anisimov <artem.anisimov.255@gmail.com>
Reviewed-by: Dmitry Dolgov <9erthalion6@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/17949-a0f17035294a55e2%40postgresql.org
|
|
Commit 83ed4de20f inadvertently used the new package names. In version
14 or older, use TestLib intead of using PostgreSQL::Test::Utils
|
|
Creation of a file with a very long name can create problems on Windows
due to its file path limits. Work around that by creating the file via a
symlink with a shorter name.
Error displayed by buildfarm animal fairywren.o
Backpatch to all live branches
|
|
When set, this environment variable was only effective for data
directories but not for all the other temporary files created by
PostgreSQL::Test::Utils. Keeping the temporary files after a successful
run can be useful for debugging purposes.
The documentation is updated to reflect the new behavior, with contents
available in doc/ since v16 and in src/test/perl/README since v15.
Author: Jacob Champion
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/CAAWbhmgHtDH1SGZ+Fw05CsXtE0mzTmjbuUxLB9mY9iPKgM6cUw@mail.gmail.com
Discussion: https://postgr.es/m/YyPd9unV14SX2bLF@paquier.xyz
Backpatch-through: 11
|
|
Commit f24523672d fixed a memory leak by moving the modifiedCols bitmap
into the per-row memory context. In the case of AFTER UPDATE triggers,
the bitmap is however referenced from an event kept until the end of the
query, resulting in a use-after-free bug.
Fixed by copying the bitmap into the AfterTriggerEvents memory context,
which is the one where we keep the trigger events. There's only one
place that needs to do the copy, but the memory context may not exist
yet. Doing that in a separate function seems more readable.
Report by Alexander Pyhalov, fix by me. Backpatch to 13, where the
bitmap was added to the event by commit 71d60e2aa0.
Reported-by: Alexander Pyhalov
Backpatch-through: 13
Discussion: https://postgr.es/m/acddb17c89b0d6cb940eaeda18c08bbe@postgrespro.ru
|
|
The Incremental Sort had a couple issues, resulting in leaking memory
during rescans, possibly triggering OOM. The code had a couple of
related flaws:
1. During rescans, the sort states were reset but then also set to NULL
(despite the comment saying otherwise). ExecIncrementalSort then
sees NULL and initializes a new sort state, leaking the memory used
by the old one.
2. Initializing the sort state also automatically rebuilt the info about
presorted keys, leaking the already initialized info. presorted_keys
was also unnecessarily reset to NULL.
Patch by James Coleman, based on patches by Laurenz Albe and Tom Lane.
Backpatch to 13, where Incremental Sort was introduced.
Author: James Coleman, Laurenz Albe, Tom Lane
Reported-by: Laurenz Albe, Zu-Ming Jiang
Backpatch-through: 13
Discussion: https://postgr.es/m/b2bd02dff61af15e3526293e2771f874cf2a3be7.camel%40cybertec.at
Discussion: https://postgr.es/m/db03c582-086d-e7cd-d4a1-3bc722f81765%40inf.ethz.ch
|
