| Age | Commit message (Collapse) | Author |
|---|
|
There was a high probability of two or more concurrent C.I.C. commands
deadlocking just before completion, because each would wait for the others
to release their reference snapshots. Fix by releasing the snapshot
before waiting for other snapshots to go away.
Per report from Paul Hinze. Back-patch to all active branches.
|
|
Peter Geoghegan
|
|
|
|
|
|
On non-Windows systems, sys/time.h was pulled in by portability/instr_time.h,
which pulled in time.h. We certainly should include time.h directly, since
we're using time(2), but the indirect include masked the problem on most
platforms.
Andres Freund
|
|
This was due to incomplete implementation of rowcount reporting
for RMV, which was due to initial waffling on whether it should
be provided. It seems unlikely to be a useful or universally
available number as more sophisticated techniques for maintaining
matviews are added, so remove the partial support rather than
completing it.
Per report of Jeevan Chalke, but with a different fix
|
|
Continue to allow a request for synchronous
checkpoints as a mechanism in case of problems.
|
|
When creating or manipulating a cached plan for a transaction control
command (particularly ROLLBACK), we must not perform any catalog accesses,
since we might be in an aborted transaction. However, plancache.c busily
saved or examined the search_path for every cached plan. If we were
unlucky enough to do this at a moment where the path's expansion into
schema OIDs wasn't already cached, we'd do some catalog accesses; and with
some more bad luck such as an ill-timed signal arrival, that could lead to
crashes or Assert failures, as exhibited in bug #8095 from Nachiket Vaidya.
Fortunately, there's no real need to consider the search path for such
commands, so we can just skip the relevant steps when the subject statement
is a TransactionStmt. This is somewhat related to bug #5269, though the
failure happens during initial cached-plan creation rather than
revalidation.
This bug has been there since the plan cache was invented, so back-patch
to all supported branches.
|
|
In most cases, these were just references to the SQL standard in
general. In a few cases, a contrast was made between SQL92 and later
standards -- those have been kept unchanged.
|
|
If an FDW fails to take special measures with a CurrentOfExpr, we will
end up trying to execute it as an ordinary qual, which was being treated
as a purely internal failure condition. Provide a more user-oriented
error message for such cases.
|
|
Only adjusted the user-exposed messages and documentation, not all
source code comments.
|
|
failure.
|
|
This saves some memory from each index relcache entry. At least on a 64-bit
machine, it saves just enough to shrink a typical relcache entry's memory
usage from 2k to 1k. That's nice if you have a lot of backends and a lot of
indexes.
|
|
When parse_hba_line's return type was changed from bool to a pointer,
the MANDATORY_AUTH_ARG macro wasn't adjusted.
|
|
Per complaint from Hubert Depesz Lubaczewski.
Catalog version bumped.
|
|
Per gripe from Tom Lane.
|
|
|
|
This changes the behavior of the start and stop actions to exit
successfully if the server was already started or stopped.
This changes the default behavior of the start action: Before, if the
server was already running, it would print a message and succeed. Now,
that situation will result in an error. When running in idempotent
mode, no message is printed and pg_ctl exits successfully.
It was considered to just make the idempotent behavior the default and
only option, but pg_upgrade needs the old behavior.
|
|
The build of .pc (pkg-config) files depends on all makefiles in use, and
in dependency tracking mode, the previous coding ended up including
/dev/null as a makefile. Apparently, on some platforms the modification
time of /dev/null changes sporadically, and so the .pc files would end
up being rebuilt every so often. Fix that by changing the makefile code
to do without using /dev/null.
|
|
Revert the matview-related changes in explain.c's API, as per recent
complaint from Robert Haas. The reason for these appears to have been
principally some ill-considered choices around having intorel_startup do
what ought to be parse-time checking, plus a poor arrangement for passing
it the view parsetree it needs to store into pg_rewrite when creating a
materialized view. Do the latter by having parse analysis stick a copy
into the IntoClause, instead of doing it at runtime. (On the whole,
I seriously question the choice to represent CREATE MATERIALIZED VIEW as a
variant of SELECT INTO/CREATE TABLE AS, because that means injecting even
more complexity into what was already a horrid legacy kluge. However,
I didn't go so far as to rethink that choice ... yet.)
I also moved several error checks into matview parse analysis, and
made the check for external Params in a matview more accurate.
In passing, clean things up a bit more around interpretOidsOption(),
and fix things so that we can use that to force no-oids for views,
sequences, etc, thereby eliminating the need to cons up "oids = false"
options when creating them.
catversion bump due to change in IntoClause. (I wonder though if we
really need readfuncs/outfuncs support for IntoClause anymore.)
|
|
per suggestion from Gurjeet Singh
|
|
Also fix accessing pgentab binary and tar.
Gurjeet Singh
|
|
To do this, we add an additional object access hook type,
OAT_FUNCTION_EXECUTE.
KaiGai Kohei
|
|
KaiGai Kohei
|
|
|
|
|
|
Per report by Will Leinweber and Peter Eisentraut
|
|
Latch activity was not being detected by non-database-connected workers; the
SIGUSR1 signal handler which is normally in charge of that was set to SIG_IGN.
Create a simple handler to call latch_sigusr1_handler instead.
Robert Haas (bug report and suggested fix)
|
|
Add a SignalUnconnectedWorkers() call so that non-database-connected background
workers are also notified when postmaster is SIGHUPped. Previously, only
database-connected workers were.
Michael Paquier (bug report and fix)
|
|
Per a note from Dickson S. Guedes.
|
|
The intent was that being populated would, long term, be just one
of the conditions which could affect whether a matview was
scannable; being populated should be necessary but not always
sufficient to scan the relation. Since only CREATE and REFRESH
currently determine the scannability, names and comments
accidentally conflated these concepts, leading to confusion.
Also add missing locking for the SQL function which allows a
test for scannability, and fix a modularity violatiion.
Per complaints from Tom Lane, although its not clear that these
will satisfy his concerns. Hopefully this will at least better
frame the discussion.
|
|
The materialized views patch adjusted ExplainOneQuery to take an
additional DestReceiver argument, but failed to add a matching
argument to the definition of ExplainOneQuery_hook. This is a
problem for users of the hook that want to call ExplainOnePlan.
Fix by adding the missing argument.
|
|
This works by extracting trigrams from the given regular expression,
in generally the same spirit as the previously-existing support for
LIKE searches, though of course the details are far more complicated.
Currently, only GIN indexes are supported. We might be able to make
it work with GiST indexes later.
The implementation includes adding API functions to backend/regex/
to provide a view of the search NFA created from a regular expression.
These functions are meant to be generic enough to be supportable in
a standalone version of the regex library, should that ever happen.
Alexander Korotkov, reviewed by Heikki Linnakangas and Tom Lane
|
|
|
|
KeepLogSeg function was broken when we switched to use a 64-bit int for the
segment number.
Per report from Jeff Janes.
|
|
Heikki reported comment was wrong, so fixed
code to match the comment: we only need to
take additional locking precautions when we
have a shared lock on the buffer.
|
|
We copy the buffer before inserting an XLOG_HINT to avoid WAL CRC errors
caused by concurrent hint writes to buffer while share locked. To make this work
we refactor RestoreBackupBlock() to allow an XLOG_HINT to avoid the normal
path for backup blocks, which assumes the underlying buffer is exclusive locked.
Resulting code completely changes layout of XLOG_HINT WAL records, but
this isn't even beta code, so this is a low impact change.
In passing, avoid taking WALInsertLock for full page writes on checksummed
hints, remove related cruft from XLogInsert() and improve xlog_desc record for
XLOG_HINT.
Andres Freund
Bug report by Fujii Masao, testing by Jeff Janes and Jaime Casanova,
review by Jeff Davis and Simon Riggs. Applied with changes from review
and some comment editing.
|
|
|
|
From performance analysis by Heikki Linnakangas
|
|
In CLUSTER, VACUUM FULL and ALTER TABLE SET TABLESPACE
I erroneously set checksum before log_newpage, which
sets the LSN and invalidates the checksum. So set
checksum immediately *after* log_newpage.
Bug report Fujii Masao, Fix and patch by Jeff Davis
|
|
Per report from Jaime Casanova. Very curious that no one else has seen
this failure ... but the code is clearly wrong as-is.
|
|
KaiGai Kohei, with comment and doc wordsmithing by me
|
|
Counting newlines shows that quite a few recent patches have neglected
to update the output-lines count given to PageOutput(). Fortunately
it's not terribly critical that this be exact, since we long since
exceeded the height of most people's terminal windows. Still, maybe
we ought to think of a way to not have to maintain this manually anymore.
|
|
This allows convenient re-execution of commands.
Will Leinweber, reviewed by Peter Eisentraut, Daniel Farina, and Tom Lane
|
|
Bug report by David Wheeler, diagnosis assistance from Tom Lane.
|
|
'strdup' the PSQLRC environment variable value before calling a routine
that might free() it.
Backpatch to 9.2, where the bug first appeared.
|
|
Throw an error instead.
Backpatch to all supported branches.
|
|
The old formula didn't take into account that each WAL sender process needs
a spinlock. We had also already exceeded the fixed number of spinlocks
reserved for misc purposes (10). Bump that to 30.
Backpatch to 9.0, where WAL senders were introduced. If I counted correctly,
9.0 had exactly 10 predefined spinlocks, and 9.1 exceeded that, but bump the
limit in 9.0 too because 10 is uncomfortably close to the edge.
|
|
The point of turning off track_activities is to avoid this reporting
overhead, but a thinko in commit 4f42b546fd87a80be30c53a0f2c897acb826ad52
caused pgstat_report_activity() to perform half of its updates anyway.
Fix that, and also make sure that we clear all the now-disabled fields
when transitioning to the non-reporting state.
|
|
Notice and complain about PQcancel() failures. Also, don't dump core if
an error PGresult doesn't contain severity and message subfields, as it
might not if it was generated by libpq itself. (We have a longstanding
TODO item to improve that, but in the meantime isolationtester had better
cope.)
I tripped across the latter item while investigating a trouble report on
buildfarm member spoonbill. As for the former, there's no evidence that
PQcancel failure is actually involved in spoonbill's problem, but it still
seems like a bad idea to ignore an error return code.
|
