| Age | Commit message (Collapse) | Author |
|---|
|
A query used to read default ACL information from the catalogs did not
free a set of PQExpBuffer.
Oversight in commit e2090d9, so backpatch down to 9.6.
Author: Jie Zhang
Reviewed-by: Sawada Masahiko
Discussion: https://postgr.es/m/05bcbc5857f948efa0b451b85a48ae10@G08CNEXMBPEKD06.g08.fujitsu.local
Backpatch-through: 9.6
|
|
Per buildfarm member hoverfly, a slow walsender could make the test
fail. Back-patch to v10, where the test was introduced.
Discussion: https://postgr.es/m/20200414013849.GA886648@rfd.leadboat.com
|
|
ExecReScanHashJoin will destroy the join's hash table if it expects
that the inner relation will produce different rows on rescan.
Up to now it's not bothered to clear the additional pointer to that
hash table that exists in the child HashState node. However, it's
possible for the query to terminate without building a fresh hash
table (this happens if the outer relation is found to be empty
during the final rescan). So we can end with a dangling pointer
to a deleted hash table. That was harmless originally, but since
9.0 EXPLAIN ANALYZE has used that pointer to print hash table
statistics. In debug builds this reproducibly results in garbage
statistics. In non-debug builds there's frequently no ill effects,
but in principle one could get wrong EXPLAIN ANALYZE output, or
perhaps even a crash if free() has released the hashtable memory
back to the OS.
To fix, just make sure we clear the additional pointer when destroying
the hash table. In problematic cases, EXPLAIN ANALYZE will then print
no hashtable statistics (reverting to its pre-9.0 behavior). This isn't
ideal, but since the problem manifests only in unusual corner cases,
it's hard to justify taking any risks to do better in the back
branches. A follow-on patch will improve matters in HEAD.
Konstantin Knizhnik and Tom Lane, per diagnosis by Thomas Munro
of a trouble report from Alvaro Herrera.
Discussion: https://postgr.es/m/20200323165059.GA24950@alvherre.pgsql
|
|
Suppress a probably-meaningless uninitialized-variable warning
(induced by my previous patch, I'm sorry to say).
Improve mark_hl_fragments()'s test for overlapping cover strings:
it failed to consider the possibility that the current string is
strictly within another one. That's unlikely given the preceding
splitting into MaxWords fragments, but I don't think it's impossible.
Discussion: https://postgr.es/m/16345-2e0cf5cddbdcd3b4@postgresql.org
|
|
This code could produce very poor results when asked to highlight a
string based on a query using phrase-match operators. The root cause
is that hlCover(), which is supposed to find a minimal substring that
matches the query, was written assuming that word position is not
significant. I'm only 95% convinced that its algorithm was correct even
for plain AND/OR queries; but it definitely fails completely for phrase
matches, causing it to possibly not identify a cover string at all.
Hence, rewrite hlCover() with a less-tense algorithm that just tries
all the possible substrings, earlier and shorter ones first. (This is
not as bad as it sounds performance-wise, because all of the string
matching has been done already: the repeated tsquery match checks
boil down to pointer comparisons.)
Unfortunately, since that approach produces more candidate cover
strings than before, it also exposes that there were bugs in the
heuristics in mark_hl_words() for selecting a best cover string.
Fixes there include:
* Do not apply the ShortWord filter to words that appear in the query.
* Remove a misguided optimization for quickly rejecting a cover.
* Fix order-of-operation bug that could cause computation of a
wrong figure of merit (poslen) when shortening a cover.
* Change the preference rule so that candidate headlines that do not
include their whole cover string (after MaxWords trimming) are lowest
priority, since they may not actually satisfy the user's query.
This results in some changes in existing regression test cases,
but they all seem reasonable. Note in particular that the tests
involving strings like "1 2 3" were previously being affected by
the ShortWord filter, masking the normal matching behavior.
Per bug #16345 from Augustinas Jokubauskas; the new test cases are
based on that example. Back-patch to 9.6 where phrase search was
added to tsquery.
Discussion: https://postgr.es/m/16345-2e0cf5cddbdcd3b4@postgresql.org
|
|
This code was woefully unreadable and under-commented. Try to improve
matters by adding comments, using some macros to make complicated
if-tests more readable, using boolean type where appropriate, etc.
There are a couple of tiny coding improvements too, but this commit
includes (I hope) no behavioral change.
Nonetheless, back-patch as far as 9.6, because a followup bug-fixing
commit depends on this.
Discussion: https://postgr.es/m/16345-2e0cf5cddbdcd3b4@postgresql.org
|
|
Currently, we don't account for buffer usage incurred by parallel workers
for parallel create index. This commit allows each worker to record the
buffer usage stats and leader backend to accumulate that stats at the
end of the operation. This will allow pg_stat_statements to display
correct buffer usage stats for (parallel) create index command.
Reported-by: Julien Rouhaud
Author: Sawada Masahiko
Reviewed-by: Dilip Kumar, Julien Rouhaud and Amit Kapila
Backpatch-through: 11, where this was introduced
Discussion: https://postgr.es/m/20200328151721.GB12854@nol
|
|
Repair an oversight in commit 8728b2c70: if we're postponing restore
of event triggers to the end, we must also postpone restoring any
comments on them, since of course we cannot create the comments first.
(This opens yet another opportunity for an event trigger to bollix
the restore, but there's no help for that.)
Per bug #16346 from Alexander Lakhin.
Like the previous commit, back-patch to all supported branches.
Hamid Akhtar and Tom Lane
Discussion: https://postgr.es/m/16346-6210ad7a0ea81be1@postgresql.org
|
|
Our documentation describes four allowed input syntaxes for circles,
but the regression tests tried only three ... with predictable
consequences. Remarkably, this has been wrong since the circle
datatype was added in 1997, but nobody noticed till now.
David Zhang, with some help from me
Discussion: https://postgr.es/m/332c47fa-d951-7574-b5cc-a8f7f7201202@highgo.ca
|
|
Since the existing bit number argument can't exceed INT32_MAX, it's
not possible for these functions to manipulate bits beyond the first
256MB of a bytea value. However, it'd be good if they could do at
least that much, and not fall over entirely for longer bytea values.
Adjust the comparisons to be done in int64 arithmetic so that works.
Also tweak the error reports to show sane values in case of overflow.
Also add some test cases to improve the miserable code coverage
of these functions.
Apply patch to back branches only; HEAD has a better solution
as of commit 26a944cf2.
Extracted from a much larger patch by Movead Li
Discussion: https://postgr.es/m/20200312115135445367128@highgo.ca
|
|
A table rewritten by ALTER TABLE would lose tracking of an index usable
for CLUSTER. This setting is tracked by pg_index.indisclustered and is
controlled by ALTER TABLE, so some extra work was needed to restore it
properly. Note that ALTER TABLE only marks the index that can be used
for clustering, and does not do the actual operation.
Author: Amit Langote, Justin Pryzby
Reviewed-by: Ibrar Ahmed, Michael Paquier
Discussion: https://postgr.es/m/20200202161718.GI13621@telsasoft.com
Backpatch-through: 9.5
|
|
There's a very low risk that RecentGlobalXmin could be far enough in
the past to be older than relfrozenxid, or even wrapped
around. Luckily the consequences of that having happened wouldn't be
too bad - the page wouldn't be pruned for a while.
Avoid that risk by using TransactionXmin instead. As that's announced
via MyPgXact->xmin, it is protected against wrapping around (see code
comments for details around relfrozenxid).
Author: Andres Freund
Discussion: https://postgr.es/m/20200328213023.s4eyijhdosuc4vcj@alap3.anarazel.de
Backpatch: 9.5-
|
|
Fixup for "Drop slot's LWLock before returning from SaveSlotToPath()"
Reported-by: Michael Paquier <michael@paquier.xyz>
|
|
entryGetItem()'s three code paths each contained bugs associated
with filtering the entries for gin_fuzzy_search_limit.
The posting-tree path failed to advance "advancePast" after having
decided to filter an item. If we ran out of items on the current
page and needed to advance to the next, what would actually happen
is that entryLoadMoreItems() would re-load the same page. Eventually,
the random dropItem() test would accept one of the same items it'd
previously rejected, and we'd move on --- but it could take awhile
with small gin_fuzzy_search_limit. To add insult to injury, this
case would inevitably cause entryLoadMoreItems() to decide it needed
to re-descend from the root, making things even slower.
The posting-list path failed to implement gin_fuzzy_search_limit
filtering at all, so that all entries in the posting list would
be returned.
The bitmap-result path used a "gotitem" variable that it failed to
update in the one place where it'd actually make a difference, ie
at the one "continue" statement. I think this was unreachable in
practice, because if we'd looped around then it shouldn't be the
case that the entries on the new page are before advancePast.
Still, the "gotitem" variable was contributing nothing to either
clarity or correctness, so get rid of it.
Refactor all three loops so that the termination conditions are
more alike and less unreadable.
The code coverage report showed that we had no coverage at all for
the re-descend-from-root code path in entryLoadMoreItems(), which
seems like a very bad thing, so add a test case that exercises it.
We also had exactly no coverage for gin_fuzzy_search_limit, so add a
simplistic test case that at least hits those code paths a little bit.
Back-patch to all supported branches.
Adé Heyward and Tom Lane
Discussion: https://postgr.es/m/CAEknJCdS-dE1Heddptm7ay2xTbSeADbkaQ8bU2AXRCVC2LdtKQ@mail.gmail.com
|
|
contrib/lo's lo_manage() thought it could use
trigdata->tg_trigger->tgname in its error message about
not being called as a trigger. That naturally led to a core dump.
unique_key_recheck() figured it could Assert that fcinfo->context
is a TriggerData node in advance of having checked that it's
being called as a trigger. That's harmless in production builds,
and perhaps not that easy to reach in any case, but it's logically
wrong.
The first of these per bug #16340 from William Crowell;
the second from manual inspection of other CALLED_AS_TRIGGER
call sites.
Back-patch the lo.c change to all supported branches, the
other to v10 where the thinko crept in.
Discussion: https://postgr.es/m/16340-591c7449dc7c8c47@postgresql.org
|
|
We require the partition key to be a subset of the set of columns
being made unique, so that physically-separate indexes on the different
partitions are sufficient to enforce the uniqueness constraint.
The existing code checked that the listed columns appear, but did not
inquire into the index semantics, which is a serious oversight given
that different index opclasses might enforce completely different
notions of uniqueness.
Ideally, perhaps, we'd just match the partition key opfamily to the
index opfamily. But hash partitioning uses hash opfamilies which we
can't directly match to btree opfamilies. Hence, look up the equality
operator in each family, and accept if it's the same operator. This
should be okay in a fairly general sense, since the equality operator
ought to precisely represent the opfamily's notion of uniqueness.
A remaining weak spot is that we don't have a cross-index-AM notion of
which opfamily member is "equality". But we know which one to use for
hash and btree AMs, and those are the only two that are relevant here
at present. (Any non-core AMs that know how to enforce equality are
out of luck, for now.)
Back-patch to v11 where this feature was introduced.
Guancheng Luo, revised a bit by me
Discussion: https://postgr.es/m/D9C3CEF7-04E8-47A1-8300-CA1DCD5ED40D@gmail.com
|
|
This was missed when the feature was added.
Reported-by: Vik Fearing
Discussion: https://postgr.es/m/eca20529-0b06-b493-ee38-f071a75dcd5b@postgresfriends.org
Backpatch-through: 10
|
|
Buildfarm experience shows that this function can fail with ENOENT
if some other process unlinks a file between when we read the directory
entry and when we try to stat() it. The problem is old but we had
not noticed it until 085b6b667 added regression test coverage.
To fix, just ignore ENOENT failures. There is one other case that
this might hide: a symlink that points to nowhere. That seems okay
though, at least better than erroring.
Back-patch to v10 where this function was added, since the regression
test cases were too.
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
|
|
GetLocaleInfoEx() can fail on strings that setlocale() was perfectly
happy with. A common way for that to happen is if the locale string
is actually a Unix-style string, say "et_EE.UTF-8". In that case,
what's after the dot is an encoding name, not a Windows codepage number;
blindly treating it as a codepage number led to failure, with a fairly
silly error message. Hence, check to see if what's after the dot is
all digits, and if not, treat it as a literal encoding name rather than
a codepage number. This will do the right thing with many Unix-style
locale strings, and produce a more sensible error message otherwise.
Somewhat independently of that, treat a zero (CP_ACP) result from
GetLocaleInfoEx() as meaning that we must use UTF-8 encoding.
Back-patch to all supported branches.
Juan José Santamaría Flecha
Discussion: https://postgr.es/m/24905.1585445371@sss.pgh.pa.us
|
|
In 9.4 I added support to use a historical snapshot in
ScanPgRelation(), while adding logical decoding. Unfortunately a
conflict with the concurrent removal of SnapshotNow was incorrectly
resolved, leading to an unregistered snapshot being used.
It is not correct to use an unregistered (or non-active) snapshot for
anything non-trivial, because catalog invalidations can cause the
snapshot to be invalidated.
Luckily it seems unlikely to actively cause problems in practice, as
ScanPgRelation() requires that we already have a lock on the relation,
we only look for a single row, and we don't appear to rely on the
result's tid to be correct. It however is clearly wrong and potential
negative consequences would likely be hard to find. So it seems worth
backpatching the fix, even without a concrete hazard.
Discussion: https://postgr.es/m/20200229052459.wzhqnbhrriezg4v2@alap3.anarazel.de
Backpatch: 9.5-
|
|
plpgsql_xact_cb ought to treat events XACT_EVENT_PARALLEL_COMMIT and
XACT_EVENT_PARALLEL_ABORT like XACT_EVENT_COMMIT and XACT_EVENT_ABORT
respectively, since its goal is to do process-local cleanup. This
oversight caused plpgsql's end-of-transaction cleanup to not get done
in parallel workers. Since a parallel worker will exit just after the
transaction cleanup, the effects of this are limited. I couldn't find
any case in the core code with user-visible effects, but perhaps there
are some in extensions. In any case it's wrong, so let's fix it before
it bites us not after.
In passing, add some comments around the handling of expression
evaluation resources in DO blocks. There's no live bug there, but it's
quite unobvious what's happening; at least I thought so. This isn't
related to the other issue, except that I found both things while poking
at expression-evaluation performance.
Back-patch the plpgsql_xact_cb fix to 9.5 where those event types
were introduced, and the DO-block commentary to v11 where DO blocks
gained the ability to issue COMMIT/ROLLBACK.
Discussion: https://postgr.es/m/10353.1585247879@sss.pgh.pa.us
|
|
When SaveSlotToPath() is called with elevel=LOG, the early exits didn't
release the slot's io_in_progress_lock.
This could result in a walsender being stuck on the lock forever. A
possible way to get into this situation is if the offending code paths
are triggered in a low disk space situation.
Author: Pavan Deolasee <pavan.deolasee@2ndquadrant.com>
Reported-by: Craig Ringer <craig@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/56a138c5-de61-f553-7e8f-6789296de785%402ndquadrant.com
|
|
While #16293 only applied to 11 (and 10 to some degree), it seems best
to add tests to all branches with partitioning support.
Reported-By: Daniel WM
Author: Andres Freund
Bug: #16293
Discussion: https://postgr.es/m/16293-26f5777d10143a66@postgresql.org
Backpatch: 10-
|
|
During the reporting of constraint violations for partitioned tables,
ExecPartitionCheckEmitError(), ExecConstraints(),
ExecWithCheckOptions() set the slot descriptor of the input slot to
the root partition's tuple desc. That's generally problematic when
the slot could be used by other routines, but can cause crashes after
the introduction of slots with "fixed" tuple descriptors in
ad7dbee368a.
The problem likely escaped detection so far for two reasons: First,
currently the only known way that these routines are used with a
partitioned table that is not "owned" by partitioning code is when
"fast defaults" are used for the child partition. Second, as an error
is raised afterwards, an "external" slot that had its descriptor
changed, is very unlikely to continue being used.
Even though the issue currently is only known to cause a crash for
11 (as that has both fast defaults and "fixed" slot descriptors), it
seems worth applying the fix to 10 too. Potentially changing random
slots is hazardous.
Regression tests will be added in a separate commit, as it seems best
to add them for master and 12 too.
Reported-By: Daniel WM
Author: Andres Freund
Bug: #16293
Discussion: https://postgr.es/m/16293-26f5777d10143a66@postgresql.org
Backpatch: 11, 10 only
|
|
src/port/getopt_long.c failed on such an argument, always seeing it
as an unrecognized switch. This is unhelpful; better is to treat such
an item as a non-switch argument. That behavior is what we find in
GNU's getopt_long(); it's what src/port/getopt.c does; and it is
required by POSIX for getopt(), which getopt_long() ought to be
generally a superset of. Moreover, it's expected by ecpg, which
intends an argument of "-" to mean "read from stdin". So fix it.
Also add some documentation about ecpg's behavior in this area, since
that was miserably underdocumented. I had to reverse-engineer it
from the code.
Per bug #16304 from James Gray. Back-patch to all supported branches,
since this has been broken forever.
Discussion: https://postgr.es/m/16304-c662b00a1322db7f@postgresql.org
|
|
This reverts commit cb2fd7eac285b1b0a24eeb2b8ed4456b66c5a09f. Per
numerous buildfarm members, it was incompatible with parallel query, and
a test case assumed LP64. Back-patch to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20200321224920.GB1763544@rfd.leadboat.com
|
|
Until now, only selected bulk operations (e.g. COPY) did this. If a
given relfilenode received both a WAL-skipping COPY and a WAL-logged
operation (e.g. INSERT), recovery could lose tuples from the COPY. See
src/backend/access/transam/README section "Skipping WAL for New
RelFileNode" for the new coding rules. Maintainers of table access
methods should examine that section.
To maintain data durability, just before commit, we choose between an
fsync of the relfilenode and copying its contents to WAL. A new GUC,
wal_skip_threshold, guides that choice. If this change slows a workload
that creates small, permanent relfilenodes under wal_level=minimal, try
adjusting wal_skip_threshold. Users setting a timeout on COMMIT may
need to adjust that timeout, and log_min_duration_statement analysis
will reflect time consumption moving to COMMIT from commands like COPY.
Internally, this requires a reliable determination of whether
RollbackAndReleaseCurrentSubTransaction() would unlink a relation's
current relfilenode. Introduce rd_firstRelfilenodeSubid. Amend the
specification of rd_createSubid such that the field is zero when a new
rel has an old rd_node. Make relcache.c retain entries for certain
dropped relations until end of transaction.
Back-patch to 9.5 (all supported versions). This introduces a new WAL
record type, XLOG_GIST_ASSIGN_LSN, without bumping XLOG_PAGE_MAGIC. As
always, update standby systems before master systems. This changes
sizeof(RelationData) and sizeof(IndexStmt), breaking binary
compatibility for affected extensions. (The most recent commit to
affect the same class of extensions was
089e4d405d0f3b94c74a2c6a54357a84a681754b.)
Kyotaro Horiguchi, reviewed (in earlier, similar versions) by Robert
Haas. Heikki Linnakangas and Michael Paquier implemented earlier
designs that materially clarified the problem. Reviewed, in earlier
designs, by Andrew Dunstan, Andres Freund, Alvaro Herrera, Tom Lane,
Fujii Masao, and Simon Riggs. Reported by Martijn van Oosterhout.
Discussion: https://postgr.es/m/20150702220524.GA9392@svana.org
|
|
Back-patch a subset of commit 9155580fd5fc2a0cbb23376dfca7cd21f59c2c7b
to v11, v10, 9.6, and 9.5. Include the latest repairs to this function.
Use a new XLOG_FPI_MULTI value instead of reusing XLOG_FPI. That way,
if an older server reads WAL from this function, that server will PANIC
instead of applying just one page of the record. The next commit adds a
call to this function.
Discussion: https://postgr.es/m/20200304.162919.898938381201316571.horikyota.ntt@gmail.com
|
|
swap_relation_files() calls toast_get_valid_index() to find and lock
this index, just before swapping with the rebuilt TOAST index. The
latter function releases the lock before returning. Potential for
mischief is low; a concurrent session can issue ALTER INDEX ... SET
(fillfactor = ...), which is not alarming. Nonetheless, changing
pg_class.relfilenode without a lock is unconventional. Back-patch to
9.5 (all supported versions), because another fix needs this.
Discussion: https://postgr.es/m/20191226001521.GA1772687@rfd.leadboat.com
|
|
Remove an obsolete comment from AtEOXact_cleanup(). Restore formatting
of a comment in struct RelationData, mangled by the pgindent run in
commit 9af4159fce6654aa0e081b00d02bca40b978745c. Back-patch to 9.5 (all
supported versions), because another fix stacks on this.
|
|
These are disabled by the configure code, so this is just fixing an
inconsistency in the MSVC code.
Backpatch to all live branches.
|
|
This patch fixes the error message in get_major_server_version() to be
"could not parse version file", and uses the full file path name, rather
than just the data directory path.
Also, commit 4109bb5de4 added the cause of the failure to the "could
not open" error message, and improved quoting. This patch backpatches
the "could not open" cause to PG 12, where it was first widely used, and
backpatches the quoting fix in that patch to all supported releases.
Reported-by: Tom Lane
Discussion: https://postgr.es/m/87pne2w98h.fsf@wibble.ilmari.org
Author: Dagfinn Ilmari Mannsåker
Backpatch-through: 9.5
|
|
This will allow to specifying SQLSTATE error code for the errors in the
missing places.
Reported-by: Sawada Masahiko
Author: Sawada Masahiko
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CA+fd4k6N8EjNvZpM8nme+y+05mz-SM8Z_BgkixzkA34R+ej0Kw@mail.gmail.com
|
|
This extends the fixes made in commit 085b6b667 to other SRFs with the
same bug, namely pg_logdir_ls(), pgrowlocks(), pg_timezone_names(),
pg_ls_dir(), and pg_tablespace_databases().
Also adjust various comments and documentation to warn against
expecting to clean up resources during a ValuePerCall SRF's final
call.
Back-patch to all supported branches, since these functions were
all born broken.
Justin Pryzby, with cosmetic tweaks by me
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
|
|
Introduced by b08dee24a557. Noted by Coverity.
|
|
resolve_polymorphic_tupdesc() and resolve_polymorphic_argtypes() failed to
cover the case of having to resolve anyarray given only an anyrange input.
The bug was masked if anyelement was also used (as either input or
output), which probably helps account for our not having noticed.
While looking at this I noticed that resolve_generic_type() would produce
the wrong answer if asked to make that same resolution. ISTM that
resolve_generic_type() is confusingly defined and overly complex, so
rather than fix it, let's just make funcapi.c do the specific lookups
it requires for itself.
With this change, resolve_generic_type() is not used anywhere, so remove
it in HEAD. In the back branches, leave it alone (complete with bug)
just in case any external code is using it.
While we're here, make some other refactoring adjustments in funcapi.c
with an eye to upcoming future expansion of the set of polymorphic types:
* Simplify quick-exit tests by adding an overall have_polymorphic_result
flag. This is about a wash now but will be a win when there are more
flags.
* Reduce duplication of code between resolve_polymorphic_tupdesc() and
resolve_polymorphic_argtypes().
* Don't bother to validate correct matching of anynonarray or anyenum;
the parser should have done that, and even if it didn't, just doing
"return false" here would lead to a very confusing, off-point error
message. (Really, "return false" in these two functions should only
occur if the call_expr isn't supplied or we can't obtain data type
info from it.)
* For the same reason, throw an elog rather than "return false" if
we fail to resolve a polymorphic type.
The bug's been there since we added anyrange, so back-patch to
all supported branches.
Discussion: https://postgr.es/m/6093.1584202130@sss.pgh.pa.us
|
|
If an index was explicitly set as replica identity index, this setting
was lost when a table was rewritten by ALTER TABLE. Because this
setting is part of pg_index but actually controlled by ALTER
TABLE (not part of CREATE INDEX, say), we have to do some extra work
to restore it.
Based-on-patch-by: Quan Zongliang <quanzongliang@gmail.com>
Reviewed-by: Euler Taveira <euler.taveira@2ndquadrant.com>
Discussion: https://www.postgresql.org/message-id/flat/c70fcab2-4866-0d9f-1d01-e75e189db342@gmail.com
|
|
RecordKnownAssignedTransactionIds() should never move
nextXid backwards. Before this commit, that could happen
if some other code path had advanced it without advancing
latestObservedXid.
One consequence is that a well timed XLOG_CHECKPOINT_ONLINE
could cause hot standby feedback messages to get confused
and report an xmin from a future epoch, potentially allowing
vacuum to run too soon on the primary.
Repair, by making sure RecordKnownAssignedTransactionIds()
can only move nextXid forwards.
In release 12 and master, this was already done by commit
2fc7af5e, which consolidated similar code and straightened
out this bug. Back-patch to supported releases before that.
Author: Eka Palamadai <ekanatha@amazon.com>
Discussion: https://postgr.es/m/98BB4805-D0A2-48E1-96F4-15014313EADC@amazon.com
|
|
I forgot that the WAL directory might hold other files besides WAL
segments, notably including new segments still being filled.
That means a blind test for the first file's size being 16MB can
fail. Restrict based on file name length to make it more robust.
Per buildfarm.
|
|
pg_dump is oblivious to this kind of dependency, so they're lost on
dump/restores (and pg_upgrade). Have pg_dump emit ALTER lines so that
they're preserved. Add some pg_dump tests for the whole thing, also.
Reviewed-by: Tom Lane (offlist)
Reviewed-by: Ibrar Ahmed
Reviewed-by: Ahsan Hadi (who also reviewed commit 899a04f5ed61)
Discussion: https://postgr.es/m/20200217225333.GA30974@alvherre.pgsql
|
|
This coding technique is undesirable because (a) it leaks the FD for
the rest of the transaction if the SRF is not run to completion, and
(b) allocated FDs are a scarce resource, but multiple interleaved
uses of the relevant functions could eat many such FDs.
In v11 and later, a query such as "SELECT pg_ls_waldir() LIMIT 1"
yields a warning about the leaked FD, and the only reason there's
no warning in earlier branches is that fd.c didn't whine about such
leaks before commit 9cb7db3f0. Even disregarding the warning, it
wouldn't be too hard to run a backend out of FDs with careless use
of these SQL functions.
Hence, rewrite the function so that it reads the directory within
a single call, returning the results as a tuplestore rather than
via value-per-call mode.
There are half a dozen other built-in SRFs with similar problems,
but let's fix this one to start with, just to see if the buildfarm
finds anything wrong with the code.
In passing, fix bogus error report for stat() failure: it was
whining about the directory when it should be fingering the
individual file. Doubtless a copy-and-paste error.
Back-patch to v10 where this function was added.
Justin Pryzby, with cosmetic tweaks and test cases by me
Discussion: https://postgr.es/m/20200308173103.GC1357@telsasoft.com
|
|
If the command is attempted for an extension that the object already
depends on, silently do nothing.
In particular, this means that if a database containing multiple such
entries is dumped, the restore will silently do the right thing and
record just the first one. (At least, in a world where pg_dump does
dump such entries -- which it doesn't currently, but it will.)
Backpatch to 9.6, where this kind of dependency was introduced.
Reviewed-by: Ibrar Ahmed, Tom Lane (offlist)
Discussion: https://postgr.es/m/20200217225333.GA30974@alvherre.pgsql
|
|
Previously, event triggers were restored just after regular triggers
(and FK constraints, which are basically triggers). This is risky
since an event trigger, once installed, could interfere with subsequent
restore commands. Worse, because event triggers don't have any
particular dependencies on any post-data objects, a parallel restore
would consider them eligible to be restored the moment the post-data
phase starts, allowing them to also interfere with restoration of a
whole bunch of objects that would have been restored before them in
a serial restore. There's no way to completely remove the risk of a
misguided event trigger breaking the restore, since if nothing else
it could break other event triggers. But we can certainly push them
to later in the process to minimize the hazard.
To fix, tweak the RestorePass mechanism introduced by commit 3eb9a5e7c
so that event triggers are handled as part of the post-ACL processing
pass (renaming the "REFRESH" pass to "POST_ACL" to reflect its more
general use). This will cause them to restore after everything except
matview refreshes, which seems OK since matview refreshes really ought
to run in the post-restore state of the database. In a parallel
restore, event triggers and matview refreshes might be intermixed,
but that seems all right as well.
Also update the code and comments in pg_dump_sort.c so that its idea
of how things are sorted agrees with what actually happens due to
the RestorePass mechanism. This is mostly cosmetic: it'll affect the
order of objects in a dump's TOC, but not the actual restore order.
But not changing that would be quite confusing to somebody reading
the code.
Back-patch to all supported branches.
Fabrízio de Royes Mello, tweaked a bit by me
Discussion: https://postgr.es/m/CAFcNs+ow1hmFox8P--3GSdtwz-S3Binb6ZmoP6Vk+Xg=K6eZNA@mail.gmail.com
|
|
Previously "waiting" could appear twice via PS in case of lock conflict
in hot standby mode. Specifically this issue happend when the delay
in WAL application determined by max_standby_archive_delay and
max_standby_streaming_delay had passed but it took more than 500 msec
to cancel all the conflicting transactions. Especially we can observe this
easily by setting those delay parameters to -1.
The cause of this issue was that WaitOnLock() and
ResolveRecoveryConflictWithVirtualXIDs() added "waiting" to
the process title in that case. This commit prevents
ResolveRecoveryConflictWithVirtualXIDs() from reporting waiting
in case of lock conflict, to fix the bug.
Back-patch to all back branches.
Author: Masahiko Sawada
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/CA+fd4k4mXWTwfQLS3RPwGr4xnfAEs1ysFfgYHvmmoUgv6Zxvmg@mail.gmail.com
|
|
At the end of recovery, standby mode is turned off to re-fetch the last
valid record from archive or pg_wal. Previously, if recovery target was
reached and standby mode was turned off while the current WAL source
was stream, recovery could try to retrieve WAL file containing the last
valid record unexpectedly from stream even though not in standby mode.
This caused an assertion failure. That is, the assertion test confirms that
WAL file should not be retrieved from stream if standby mode is not true.
This commit moves back the current WAL source to archive if it's stream
even though not in standby mode, to avoid that assertion failure.
This issue doesn't cause the server to crash when built with assertion
disabled. In this case, the attempt to retrieve WAL file from stream not
in standby mode just fails. And then recovery tries to retrieve WAL file
from archive or pg_wal.
Back-patch to all supported branches.
Author: Kyotaro Horiguchi
Reviewed-by: Fujii Masao
Discussion: https://postgr.es/m/20200227.124830.2197604521555566121.horikyota.ntt@gmail.com
|
|
|
|
Using ALTER TABLE ATTACH PARTITION causes an assertion failure when
attempting to work on a partitioned index, because partitioned indexes
cannot have partition bounds.
The grammar of ALTER TABLE ATTACH PARTITION requires partition bounds,
but not ALTER INDEX, so mixing ALTER TABLE with partitioned indexes is
confusing. Hence, on HEAD, prevent ALTER TABLE to attach a partition if
the relation involved is a partitioned index. On back-branches, as
applications may rely on the existing behavior, just remove the
culprit assertion.
Reported-by: Alexander Lakhin
Author: Amit Langote, Michael Paquier
Discussion: https://postgr.es/m/16276-5cd1dcc8fb8be7b5@postgresql.org
Backpatch-through: 11
|
|
Commit 356687bd8 omitted to remove leftover code for destroying
a hashed subplan's hash tables, with the result that the tables
were always rebuilt not reused; this leads to severe memory
leakage if a hashed subplan is re-executed enough times.
Moreover, the code for reusing the hashnulls table had a typo
that would have made it do the wrong thing if it were reached.
Looking at the code coverage report shows severe under-coverage
of the potential callers of ResetTupleHashTable, so add some test
cases that exercise them.
Andreas Karlsson and Tom Lane, per reports from Ranier Vilela
and Justin Pryzby.
Backpatch to v11, as the faulty commit was.
Discussion: https://postgr.es/m/edb62547-c453-c35b-3ed6-a069e4d6b937@proxel.se
Discussion: https://postgr.es/m/CAEudQAo=DCebm1RXtig9OH+QivpS97sMkikt0A9qHmMUs+g6ZA@mail.gmail.com
Discussion: https://postgr.es/m/20200210032547.GA1412@telsasoft.com
|
|
Such an access became possible when commit 246a6c8f7 added more
aggressive cleanup of orphaned temp relations by autovacuum.
Since autovacuum's snapshot might be slightly stale, it could
attempt to access an already-dropped temp namespace, resulting in
an assertion failure or null-pointer dereference. (In practice,
since we don't drop temp namespaces automatically but merely
recycle them, this situation could only arise if a superuser does
a manual drop of a temp namespace. Still, that should be allowed.)
The core of the bug, IMO, is that isTempNamespaceInUse and its callers
failed to think hard about whether to treat "temp namespace isn't there"
differently from "temp namespace isn't in use". In hopes of forestalling
future mistakes of the same ilk, replace that function with a new one
checkTempNamespaceStatus, which makes the same tests but returns a
three-way enum rather than just a bool. isTempNamespaceInUse is gone
entirely in HEAD; but just in case some external code is relying on it,
keep it in the back branches, as a bug-compatible wrapper around the
new function.
Per report originally from Prabhat Kumar Sahu, investigated by Mahendra
Singh and Michael Paquier; the final form of the patch is my fault.
This replaces the failed fix attempt in a052f6cbb.
Backpatch as far as v11, as 246a6c8f7 was.
Discussion: https://postgr.es/m/CAKYtNAr9Zq=1-ww4etHo-VCC-k120YxZy5OS01VkaLPaDbv2tg@mail.gmail.com
|
|
OpenBSD falls back to "C" when using an incorrect input with setlocale()
and LC_CTYPE, causing this test, introduced by 008cf04, to fail. This
removes the culprit test to avoid the portability issue.
Per report from Robert Haas, via buildfarm member curculio.
Discussion: https://postgr.es/m/CA+TgmoZ6ddh3mHD9gU8DvNYoFmuJaYYn1+4AvZNp25vTdRwCAQ@mail.gmail.com
Backpatch-through: 11
|
