| Age | Commit message (Collapse) | Author |
|---|
|
In the old syntax, which used UNBOUNDED, we had a similar restriction,
but commit d363d42bb9a4399a0207bd3b371c966e22e06bd3, which changed the
syntax, eliminated it. Put it back.
Patch by me, reviewed by Dean Rasheed.
Discussion: http://postgr.es/m/CA+Tgmobs+pLPC27tS3gOpEAxAffHrq5w509cvkwTf9pF6cWYbg@mail.gmail.com
|
|
Bug: #14813
|
|
Otherwise, log_statement = 'ddl' causes errors if those statement
types are used.
Michael Paquier, reviewed by Ashutosh Sharma
Discussion: http://postgr.es/m/CAB7nPqStC3HkE76Q1MnHsVd1vF1Td9zXApzYadzDMyLMRkkGrw@mail.gmail.com
|
|
Amit Langote
Discussion: http://postgr.es/m/a83a0899-19f5-594c-9aac-3ba0f16989a1@lab.ntt.co.jp
|
|
In most cases, this omission won't matter, because the appropriate
locks will have been acquired during parse/plan or by AcquireExecutorLocks.
But it's a bug all the same.
Report by Ashutosh Bapat. Patch by me, reviewed by Amit Langote.
Discussion: http://postgr.es/m/CAFjFpRdHb_ZnoDTuBXqrudWXh3H1ibLkr6nHsCFT96fSK4DXtA@mail.gmail.com
|
|
During the development of d47cfef711 the CFI()s in ExecScan() were
moved back and forth, ending up in the wrong place. Thus queries that
largely spend their time in ExecScan(), and have neither projection
nor a qual, can't be cancelled in a timely manner.
Reported-By: Jeff Janes
Author: Andres Freund
Discussion: https://postgr.es/m/CAMkU=1weDXp8eLLPt9SO1LEUsJYYK9cScaGhLKpuN+WbYo9b5g@mail.gmail.com
Backpatch: 10, as d47cfef711
|
|
The order in which GRANTs are output is important as GRANTs which have
been GRANT'd by individuals via WITH GRANT OPTION GRANTs have to come
after the GRANT which included the WITH GRANT OPTION. This happens
naturally in the backend during normal operation as we only change
existing ACLs in-place, only add new ACLs to the end, and when removing
an ACL we remove any which depend on it also.
Also, adjust the comments in acl.h to make this clear.
Unfortunately, the updates to pg_dump to handle initial privileges
involved pulling apart ACLs and then combining them back together and
could end up putting them back together in an invalid order, leading to
dumps which wouldn't restore.
Fix this by adjusting the queries used by pg_dump to ensure that the
ACLs are rebuilt in the same order in which they were originally.
Back-patch to 9.6 where the changes for initial privileges were done.
|
|
thread test cases work on Windows.
|
|
Fix threaded test cases on Windows not to crash in setlocale() which can be
global or local to a thread on Windows.
Author: Christian Ullrich
|
|
The previous error message when attempting to run a general SQL command
in a physical replication WAL sender was a bit sloppy.
Reported-by: Fujii Masao <masao.fujii@gmail.com>
|
|
When copying from an active database tree, it's possible for files to be
deleted after we see them in a readdir() scan but before we can open them.
(Once we've got a file open, we don't expect any further errors from it
getting unlinked, though.) Tweak RecursiveCopy so it can cope with this
case, so as to avoid irreproducible test failures.
Back-patch to 9.6 where this code was added. In v10 and HEAD, also
remove unused "use RecursiveCopy" in one recovery test script.
Michael Paquier and Tom Lane
Discussion: https://postgr.es/m/24621.1504924323@sss.pgh.pa.us
|
|
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 0c1fdae472e52197eb0e5ccdd2cfdd3654f76834
|
|
|
|
AFTER triggers using transition tables crashed if they were fired due
to a foreign key ON CASCADE update. This is because ExecEndModifyTable
flushes the transition tables, on the assumption that any trigger that
could need them was already fired during ExecutorFinish. Normally
that's true, because we don't allow transition-table-using triggers
to be deferred. However, foreign key CASCADE updates force any
triggers on the referencing table to be deferred to the outer query
level, by means of the EXEC_FLAG_SKIP_TRIGGERS flag. I don't recall
all the details of why it's like that and am pretty loath to redesign
it right now. Instead, just teach ExecEndModifyTable to skip destroying
the TransitionCaptureState when that flag is set. This will allow the
transition table data to survive until end of the current subtransaction.
This isn't a terribly satisfactory solution, because (1) we might be
leaking the transition tables for much longer than really necessary,
and (2) as things stand, an AFTER STATEMENT trigger will fire once per
RI updating query, ie once per row updated or deleted in the referenced
table. I suspect that is not per SQL spec. But redesigning this is a
research project that we're certainly not going to get done for v10.
So let's go with this hackish answer for now.
In passing, tweak AfterTriggerSaveEvent to not save the transition_capture
pointer into the event record for a deferrable trigger. This is not
necessary to fix the current bug, but it avoids letting dangling pointers
to long-gone transition tables persist in the trigger event queue. That's
at least a safety feature. It might also allow merging shared trigger
states in more cases than before.
I added a regression test that demonstrates the crash on unpatched code,
and also exposes the behavior of firing the AFTER STATEMENT triggers
once per row update.
Per bug #14808 from Philippe Beaudoin. Back-patch to v10.
Discussion: https://postgr.es/m/20170909064853.25630.12825@wrigleys.postgresql.org
|
|
|
|
map_partition_varattnos() failed to set its found_whole_row output
parameter if the given expression list was NIL. This seems to be
a pre-existing bug that chanced to be exposed by commit 6f6b99d13.
It might be unreachable in v10, but I have little faith in that
proposition, so back-patch.
Per buildfarm.
|
|
Evidently missed in commit eb61136dc.
Spotted by Oleg Bartunov.
Discussion: https://postgr.es/m/CAF4Au4wz_iK5r4fnTnnd8XqioAZQs-P7-VsEAfivW34zMVpAmw@mail.gmail.com
|
|
This doesn't allow routing tuple to the foreign partitions themselves,
but it permits tuples to be routed to regular partitions despite the
presence of foreign partitions in the same inheritance hierarchy.
Etsuro Fujita, reviewed by Amit Langote and by me.
Discussion: http://postgr.es/m/bc3db4c1-1693-3b8a-559f-33ad2b50b7ad@lab.ntt.co.jp
|
|
We already had a psql variable VERSION that shows the verbose form of
psql's own version. Add VERSION_NAME to show the short form (e.g.,
"11devel") and VERSION_NUM to show the numeric form (e.g., 110000).
Also add SERVER_VERSION_NAME and SERVER_VERSION_NUM to show the short and
numeric forms of the server's version. (We'd probably add SERVER_VERSION
with the verbose string if it were readily available; but adding another
network round trip to get it seems too expensive.)
The numeric forms, in particular, are expected to be useful for scripting
purposes, now that psql can do conditional tests.
Back-patch of commit 9ae9d8c1549c384dbdb8363e1d932b7311d25c56.
Fabien Coelho, reviewed by Pavel Stehule
Discussion: https://postgr.es/m/alpine.DEB.2.20.1704020917220.4632@lancre
|
|
The NAMEDTUPLESTORE patch piggybacked on the infrastructure for
TABLEFUNC/VALUES/CTE RTEs, none of which can ever have dropped columns,
so the possibility was ignored most places. Fix that, including adding a
specification to parsenodes.h about what it's supposed to look like.
In passing, clean up assorted comments that hadn't been maintained
properly by said patch.
Per bug #14799 from Philippe Beaudoin. Back-patch to v10.
Discussion: https://postgr.es/m/20170906120005.25630.84360@wrigleys.postgresql.org
|
|
Evidently somebody neglected to update this sometime in the v10 cycle.
Patching REL_10_STABLE only; this value is about to be obsolete in
HEAD anyway. Noted while examining \gdesc patch.
|
|
Throttling for sending a base backup in walsender is broken for the case
where there is a lot of WAL traffic, because the latch used to put the
walsender to sleep is also signalled by regular WAL traffic (and each
signal causes an additional batch of data to be sent); the net effect is
that there is no or little actual throttling. This is undesirable, so
rewrite the sleep into a loop to achieve the desired effeect.
Author: Jeff Janes, small tweaks by me
Reviewed-by: Antonin Houska
Discussion: https://postgr.es/m/CAMkU=1xH6mde-yL-Eo1TKBGNd0PB1-TMxvrNvqcAkN-qr2E9mw@mail.gmail.com
|
|
Discussion: https://postgr.es/m/20170828130545.sdajqlpr37hmmd6a@alvherre.pgsql
|
|
In commit 9d6b160d7, I tweaked pg_config.h.win32 to use
"#define HAVE_LONG_LONG_INT_64 1" rather than defining it as empty,
for consistency with what happens in an autoconf'd build.
But Solution.pm injects another definition of that macro into
ecpg_config.h, leading to justifiable (though harmless) compiler whining.
Make that one consistent too. Back-patch, like the previous patch.
Discussion: https://postgr.es/m/CAEepm=1dWsXROuSbRg8PbKLh0S=8Ou-V8sr05DxmJOF5chBxqQ@mail.gmail.com
|
|
Move the responsibility for creating/destroying TupleQueueReaders into
execParallel.c, to avoid duplicative coding in nodeGather.c and
nodeGatherMerge.c. Also, instead of having DestroyTupleQueueReader do
shm_mq_detach, do it in the caller (which is now only ExecParallelFinish).
This means execParallel.c does both the attaching and detaching of the
tuple-queue-reader shm_mqs, which seems less weird than the previous
arrangement.
These changes also eliminate a vestigial memory leak (of the pei->tqueue
array). It's now demonstrable that rescans of Gather or GatherMerge don't
leak memory.
Discussion: https://postgr.es/m/8670.1504192177@sss.pgh.pa.us
|
|
Instead of using a cast to force the constant to be the right width,
assume we can plaster on an L, UL, LL, or ULL suffix as appropriate.
The old approach to this is very hoary, dating from before we were
willing to require compilers to have working int64 types.
This fix makes the PG_INT64_MIN, PG_INT64_MAX, and PG_UINT64_MAX
constants safe to use in preprocessor conditions, where a cast
doesn't work. Other symbolic constants that might be defined using
[U]INT64CONST are likewise safer than before.
Also fix the SIZE_MAX macro to be similarly safe, if we are forced
to provide a definition for that. The test added in commit 2e70d6b5e
happens to do what we want even with the hack "(size_t) -1" definition,
but we could easily get burnt on other tests in future.
Back-patch to all supported branches, like the previous commits.
Discussion: https://postgr.es/m/15883.1504278595@sss.pgh.pa.us
|
|
Pre-C99 platforms may lack <stdint.h> and thereby SIZE_MAX. We have
a couple of places using the hack "(size_t) -1" as a fallback, but
it wasn't universally available; which means the code added in commit
2e70d6b5e fails to compile everywhere. Move that hack to c.h so that
we can rely on having SIZE_MAX everywhere.
Per discussion, it'd be a good idea to make the macro's value safe
for use in #if-tests, but that will take a bit more work. This is
just a quick expedient to get the buildfarm green again.
Back-patch to all supported branches, like the previous commit.
Discussion: https://postgr.es/m/15883.1504278595@sss.pgh.pa.us
|
|
The original code had a race condition because it never ensured the
standby was caught up before proceeding; add a wait similar to every
other place that does this.
Author: Michaël Paquier
Discussion: https://postgr.es/m/CAB7nPqTm9p+LCm1mVJYvgpwagRK+uibT-pKq0O2-paOWxT62jw@mail.gmail.com
|
|
Do for replication origins what the previous commit did for replication
slots: restore the original behavior of replication origin drop to raise
an error rather than blocking, because users might be depending on the
original behavior. Maintain the blocking behavior when invoked
internally from logical replication subscription handling.
Discussion: https://postgr.es/m/20170830133922.tlpo3lgfejm4n2cs@alvherre.pgsql
|
|
Wait for slot to become inactive before continuing.
Author: Petr Jelinek
|
|
Commit 9915de6c1cb2 changed the default behavior of
DROP_REPLICATION_SLOT so that it would wait until any session holding
the slot active would release it, instead of raising an error. But
users are already depending on the original behavior, so revert to it by
default and add a WAIT option to invoke the new behavior.
Per complaint from Simone Gotti, in
Discussion: https://postgr.es/m/CAEvsy6Wgdf90O6pUvg2wSVXL2omH5OPC-38OD4Zzgk-FXavj3Q@mail.gmail.com
|
|
Rescanning a GatherMerge led to leaking some memory in the executor's
query-lifespan context, because most of the node's working data structures
were simply abandoned and rebuilt from scratch. In practice, this might
never amount to much, given the cost of relaunching worker processes ---
but it's still pretty messy, so let's fix it.
We can rearrange things so that the tuple arrays are simply cleared and
reused, and we don't need to rebuild the TupleTableSlots either, just
clear them. One small complication is that because we might get a
different number of workers on each iteration, we can't keep the old
convention that the leader's gm_slots[] entry is the last one; the leader
might clobber a TupleTableSlot that we need for a worker in a future
iteration. Hence, adjust the logic so that the leader has slot 0 always,
while the active workers have slots 1..n.
Back-patch to v10 to keep all the existing versions of nodeGatherMerge.c
in sync --- because of the renumbering of the slots, there would otherwise
be a very large risk that any future backpatches in this module would
introduce bugs.
Discussion: https://postgr.es/m/8670.1504192177@sss.pgh.pa.us
|
|
The logic around shm_mq_detach was a few bricks shy of a load, because
(contrary to the comments for shm_mq_attach) all it did was update the
shared shm_mq state. That left us leaking a bit of process-local
memory, but much worse, the on_dsm_detach callback for shm_mq_detach
was still armed. That means that whenever we ultimately detach from
the DSM segment, we'd run shm_mq_detach again for already-detached,
possibly long-dead queues. This accidentally fails to fail today,
because we only ever re-use a shm_mq's memory for another shm_mq, and
multiple detach attempts on the last such shm_mq are fairly harmless.
But it's gonna bite us someday, so let's clean it up.
To do that, change shm_mq_detach's API so it takes a shm_mq_handle
not the underlying shm_mq. This makes the callers simpler in most
cases anyway. Also fix a few places in parallel.c that were just
pfree'ing the handle structs rather than doing proper cleanup.
Back-patch to v10 because of the risk that the revenant shm_mq_detach
callbacks would cause a live bug sometime. Since this is an API
change, it's too late to do it in 9.6. (We could make a variant
patch that preserves API, but I'm not excited enough to do that.)
Discussion: https://postgr.es/m/8670.1504192177@sss.pgh.pa.us
|
|
Make sure that rescans of parallel indexscans are tested.
Per code coverage report.
|
|
Comment the fields of GatherMergeState, and organize them a bit more
sensibly. Comment GMReaderTupleBuffer more usefully too. Improve
assorted other comments that were obsolete or just not very good English.
Get rid of the use of a GMReaderTupleBuffer for the leader process;
that was confusing, since only the "done" field was used, and that
in a way redundant with need_to_scan_locally.
In gather_merge_init, avoid calling load_tuple_array for
already-known-exhausted workers. I'm not sure if there's a live bug there,
but the case is unlikely to be well tested due to timing considerations.
Remove some useless code, such as duplicating the tts_isempty test done by
TupIsNull.
Remove useless initialization of ps.qual, replacing that with an assertion
that we have no qual to check. (If we did, the code would fail to check
it.)
Avoid applying heap_copytuple to a null tuple. While that fails to crash,
it's confusing and it makes the code less legible not more so IMO.
Propagate a couple of these changes into nodeGather.c, as well.
Back-patch to v10, partly because of the possibility that the
gather_merge_init change is fixing a live bug, but mostly to keep
the branches in sync to ease future bug fixes.
|
|
Previously, the parallel executor logic did reinitialization of shared
state within the ExecReScan code for parallel-aware scan nodes. This is
problematic, because it means that the ExecReScan call has to occur
synchronously (ie, during the parent Gather node's ReScan call). That is
swimming very much against the tide so far as the ExecReScan machinery is
concerned; the fact that it works at all today depends on a lot of fragile
assumptions, such as that no plan node between Gather and a parallel-aware
scan node is parameterized. Another objection is that because ExecReScan
might be called in workers as well as the leader, hacky extra tests are
needed in some places to prevent unwanted shared-state resets.
Hence, let's separate this code into two functions, a ReInitializeDSM
call and the ReScan call proper. ReInitializeDSM is called only in
the leader and is guaranteed to run before we start new workers.
ReScan is returned to its traditional function of resetting only local
state, which means that ExecReScan's usual habits of delaying or
eliminating child rescan calls are safe again.
As with the preceding commit 7df2c1f8d, it doesn't seem to be necessary
to make these changes in 9.6, which is a good thing because the FDW and
CustomScan APIs are impacted.
Discussion: https://postgr.es/m/CAA4eK1JkByysFJNh9M349u_nNjqETuEnY_y1VUc_kJiU0bxtaQ@mail.gmail.com
|
|
Revert the reversion commits a20aac890 and 9b644745c. In the wake of
commit 7df2c1f8d, we should get stable buildfarm results from this test;
if not, I'd like to know sooner not later.
Discussion: https://postgr.es/m/CAA4eK1JkByysFJNh9M349u_nNjqETuEnY_y1VUc_kJiU0bxtaQ@mail.gmail.com
|
|
The ExecReScan machinery contains various optimizations for postponing
or skipping rescans of plan subtrees; for example a HashAgg node may
conclude that it can re-use the table it built before, instead of
re-reading its input subtree. But that is wrong if the input contains
a parallel-aware table scan node, since the portion of the table scanned
by the leader process is likely to vary from one rescan to the next.
This explains the timing-dependent buildfarm failures we saw after
commit a2b70c89c.
The established mechanism for showing that a plan node's output is
potentially variable is to mark it as depending on some runtime Param.
Hence, to fix this, invent a dummy Param (one that has a PARAM_EXEC
parameter number, but carries no actual value) associated with each Gather
or GatherMerge node, mark parallel-aware nodes below that node as dependent
on that Param, and arrange for ExecReScanGather[Merge] to flag that Param
as changed whenever the Gather[Merge] node is rescanned.
This solution breaks an undocumented assumption made by the parallel
executor logic, namely that all rescans of nodes below a Gather[Merge]
will happen synchronously during the ReScan of the top node itself.
But that's fundamentally contrary to the design of the ExecReScan code,
and so was doomed to fail someday anyway (even if you want to argue
that the bug being fixed here wasn't a failure of that assumption).
A follow-on patch will address that issue. In the meantime, the worst
that's expected to happen is that given very bad timing luck, the leader
might have to do all the work during a rescan, because workers think
they have nothing to do, if they are able to start up before the eventual
ReScan of the leader's parallel-aware table scan node has reset the
shared scan state.
Although this problem exists in 9.6, there does not seem to be any way
for it to manifest there. Without GatherMerge, it seems that a plan tree
that has a rescan-short-circuiting node below Gather will always also
have one above it that will short-circuit in the same cases, preventing
the Gather from being rescanned. Hence we won't take the risk of
back-patching this change into 9.6. But v10 needs it.
Discussion: https://postgr.es/m/CAA4eK1JkByysFJNh9M349u_nNjqETuEnY_y1VUc_kJiU0bxtaQ@mail.gmail.com
|
|
Adding more than 1 billion rows to a PGresult would overflow its ntups and
tupArrSize fields, leading to client crashes. It'd be desirable to use
wider fields on 64-bit machines, but because all of libpq's external APIs
use plain "int" for row counters, that's going to be hard to accomplish
without an ABI break. Given the lack of complaints so far, and the general
pain that would be involved in using such huge PGresults, let's settle for
just preventing the overflow and reporting a useful error message if it
does happen. Also, for a couple more lines of code we can increase the
threshold of trouble from INT_MAX/2 to INT_MAX rows.
To do that, refactor pqAddTuple() to allow returning an error message that
replaces the default assumption that it failed because of out-of-memory.
Along the way, fix PQsetvalue() so that it reports all failures via
pqInternalNotice(). It already did so in the case of bad field number,
but neglected to report anything for other error causes.
Because of the potential for crashes, this seems like a back-patchable
bug fix, despite the lack of field reports.
Michael Paquier, per a complaint from Igor Korot.
Discussion: https://postgr.es/m/CA+FnnTxyLWyjY1goewmJNxC==HQCCF4fKkoCTa9qR36oRAHDPw@mail.gmail.com
|
|
|
|
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 31ad7831c3018858b662ed1d26a6c3bfe92b4e1f
|
|
Fix thinko in commit 8be8510cf: it's okay to have dbid == 0 in normal
(non-pin) entries in pg_shdepend, because global objects such as
databases are entered that way. The test would pass so long as it
was run in a cluster containing no databases/tablespaces owned by,
or granted to, roles other than the bootstrap superuser. That's the
expected situation for "make check", but for "make installcheck", not
so much.
Reported by Ryan Murphy.
Discussion: https://postgr.es/m/CAHeEsBc6EQe0mxGBKDXAwJbntgfvoAd5MQC-5362SmC3Tng_6g@mail.gmail.com
|
|
The string "% of total" was marked by xgettext to be a c-format, but it
is actually not, so mark up the source to prevent that.
Compute the column widths of the final display dynamically based on the
translated strings, so that translations don't mess up the display
accidentally.
|
|
related to 6ce6a61840cc90172ad3da7bf303656132fa5fab
Reported-by: Christoph Berg <myon@debian.org>
|
|
|
|
Commit 16be2fd100199bdf284becfcee02c5eb20d8a11d added DSA_ALLOC_HUGE,
DSA_ALLOC_ZERO and DSA_ALLOC_NO_OOM which have the same numerical
values and meanings as the similarly named MCXT_... macros. In one
place we accidentally used MCXT_ALLOC_NO_OOM when DSA_ALLOC_NO_OOM is
wanted, so tidy that up.
Author: Thomas Munro
Discussion: http://postgr.es/m/CAEepm=2AimHxVkkxnMfQvbZMkXy0uKbVa0-D38c5-qwrCm4CMQ@mail.gmail.com
Backpatch: 10, where dsa was introduced.
|
|
Set expanded output when requested through \gx in ExecQueryUsingCursor()
(used when FETCH_COUNT is set).
Discussion: https://www.postgresql.org/message-id/CB7A53AA-5645-4BDD-AB07-4D22CD9D8FF1%40gmx.net
Author: Tobias Bussmann
|
|
Remove code meant for upgrading to a particular version of PostgreSQL
9.0. Since pg_upgrade only supports upgrading to the current major
version, this code is no longer useful.
|
|
The original value 12 was set based on RFC 5802 for SCRAM-SHA-1, but RFC
7677 for SCRAM-SHA-256 uses 16, so use that. (This does not affect the
validity of already stored verifiers.)
Discussion: https://www.postgresql.org/message-id/flat/12cc9297-7e05-932f-d863-765e5626ead4%402ndquadrant.com
|
|
Reported-by: Alvaro Herrera <alvherre@2ndquadrant.com>
|
