| Age | Commit message (Collapse) | Author |
|---|
|
After running GetForeignRelSize for a foreign table, adjust rel->tuples
to be at least as large as rel->rows. This prevents bizarre behavior
in estimate_num_groups() and perhaps other places, especially in the
scenario where rel->tuples is zero because pg_class.reltuples is
(suggesting that ANALYZE has never been run for the table). As things
stood, we'd end up estimating one group out of any GROUP BY on such a
table, whereas the default group-count estimate is more likely to result
in a sane plan.
Also, clarify in the documentation that GetForeignRelSize has the option
to override the rel->tuples value if it has a better idea of what to use
than what is in pg_class.reltuples.
Per report from Jeff Janes. Back-patch to all supported branches.
Patch by me; thanks to Etsuro Fujita for review
Discussion: https://postgr.es/m/CAMkU=1xNo9cnan+Npxgz0eK7394xmjmKg-QEm8wYG9P5-CcaqQ@mail.gmail.com
|
|
Commit ecd9e9f0b fixed the problem in the wrong place, causing unwanted
side-effects on the behavior of GetNextTempTableSpace(). Instead,
let's make SharedFileSetInit() responsible for subbing in the value
of MyDatabaseTableSpace when the default tablespace is called for.
The convention about what is in the tempTableSpaces[] array is
evidently insufficiently documented, so try to improve that.
It also looks like SharedFileSetInit() is doing the wrong thing in the
case where temp_tablespaces is empty. It was hard-wiring use of the
pg_default tablespace, but it seems like using MyDatabaseTableSpace
is more consistent with what happens for other temp files.
Back-patch the reversion of PrepareTempTablespaces()'s behavior to
9.5, as ecd9e9f0b was. The changes in SharedFileSetInit() go back
to v11 where that was introduced. (Note there is net zero code change
before v11 from these two patch sets, so nothing to release-note.)
Magnus Hagander and Tom Lane
Discussion: https://postgr.es/m/CABUevExg5YEsOvqMxrjoNvb3ApVyH+9jggWGKwTDFyFCVWczGQ@mail.gmail.com
|
|
A likely copy/paste error in 98e8b480532 from back in 2004 would
cause temp tablespace to be reset to InvalidOid if temp_tablespaces
was set to the same value as the primary tablespace in the database.
This would cause shared filesets (such as for parallel hash joins)
to ignore them, putting the temporary files in the default tablespace
instead of the configured one. The bug is in the old code, but it
appears to have been exposed only once we had shared filesets.
Reviewed-By: Daniel Gustafsson
Discussion: https://postgr.es/m/CABUevExg5YEsOvqMxrjoNvb3ApVyH+9jggWGKwTDFyFCVWczGQ@mail.gmail.com
Backpatch-through: 9.5
|
|
I forgot that INT64_FORMAT can't be used with sscanf on Windows.
Use the same trick of sscanf'ing into a temp variable as we do in
some other places in zic.c.
The upstream IANA code avoids the portability problem by relying on
<inttypes.h>'s SCNdFAST64 macro. Once we're requiring C99 in all
branches, we should do likewise and drop this set of diffs from
upstream. For now, though, a hack seems fine, since we do not
actually care about leapseconds anyway.
Discussion: https://postgr.es/m/4e5d1a5b-143e-e70e-a99d-a3b01c1ae7c3@2ndquadrant.com
|
|
explain_get_index_name() applied quote_identifier() to the index name.
This is fine for text output, but the non-text output formats all have
their own quoting conventions and would much rather start from the
actual index name. For example in JSON you'd get something like
"Index Name": "\"My Index\"",
which is surely not desirable, especially when the same does not
happen for table names. Hence, move the responsibility for applying
quoting out to the callers, where it can go into already-existing
special code paths for text format.
This changes the API spec for users of explain_get_index_name_hook:
before, they were supposed to apply quote_identifier() if necessary,
now they should not. Research suggests that the only publicly
available user of the hook is hypopg, and it actually forgot to
apply quoting anyway, so it's fine. (In any case, there's no
behavioral change for the output of a hook as seen in non-text
EXPLAIN formats, so this won't break any case that programs should
be relying on.)
Digging in the commit logs, it appears that quoting was included in
explain_get_index_name's duties when commit 604ffd280 invented it;
and that was fine at the time because we only had text output format.
This should have been rethought when non-text formats were invented,
but it wasn't.
This is a fairly clear bug for users of non-text EXPLAIN formats,
so back-patch to all supported branches.
Per bug #16502 from Maciek Sakrejda. Patch by me (based on
investigation by Euler Taveira); thanks to Julien Rouhaud for review.
Discussion: https://postgr.es/m/16502-57bd1c9f913ed1d1@postgresql.org
|
|
A few places calling fwrite and gzwrite were not setting errno to ENOSPC
when reporting errors, as is customary; this led to some failures being
reported as
"could not write file: Success"
which makes us look silly. Make a few of these places in pg_dump and
pg_basebackup use our customary pattern.
Backpatch-to: 9.5
Author: Justin Pryzby <pryzby@telsasoft.com>
Author: Tom Lane <tgl@sss.pgh.pa.us>
Author: Álvaro Herrera <alvherre@alvh.no-ip.org>
Discussion: https://postgr.es/m/20200611153753.GU14879@telsasoft.com
|
|
The IANA time zone folk have deprecated use of a "posixrules" file in
the tz database. While for now it's our choice whether to keep
supplying one in our own builds, installations built with
--with-system-tzdata will soon be needing to cope with that file not
being present, at least on some platforms.
This causes a problem for the horology test, which expected the
nonstandard POSIX zone spec "CST7CDT" to apply pre-2007 US daylight
savings rules. That does happen if the posixrules file supplies such
information, but otherwise the test produces undesired results.
To fix, add an explicit transition date rule that matches 2005 practice.
(We could alternatively have switched the test to use some real time
zone, but it seems useful to have coverage of this type of zone spec.)
While at it, update a documentation example that also relied on
"CST7CDT"; use a real-world zone name instead. Also, document why
the zone names EST5EDT, CST6CDT, MST7MDT, PST8PDT aren't subject to
similar failures when "posixrules" is missing.
Back-patch to all supported branches, since the hazard is the same
for all.
Discussion: https://postgr.es/m/1665379.1592581287@sss.pgh.pa.us
|
|
|
|
This was a danger only for --disable-spinlocks in combination with
atomic operations unsupported by the current platform.
While atomics.c was careful to signal that a separate semaphore ought
to be used when spinlock emulation is active, spin.c didn't actually
implement that mechanism. That's my (Andres') fault, it seems to have
gotten lost during the development of the atomic operations support.
Fix that issue and add test for nesting atomic operations inside a
spinlock.
Author: Andres Freund
Discussion: https://postgr.es/m/20200605023302.g6v3ydozy5txifji@alap3.anarazel.de
Backpatch: 9.5-
|
|
As s_lock_test, the already existing test for spinlocks, isn't run in
an automated fashion (and doesn't test a normal backend environment),
adding tests that are run as part of a normal regression run is a good
idea. Particularly in light of several recent and upcoming spinlock
related fixes.
Currently the new tests are run as part of the pre-existing
test_atomic_ops() test. That perhaps can be quibbled about, but for
now seems ok.
The only operations that s_lock_test tests but the new tests don't are
the detection of a stuck spinlock and S_LOCK_FREE (which is otherwise
unused, not implemented on all platforms, and will be removed).
This currently contains a test for more than INT_MAX spinlocks (only
run with --disable-spinlocks), to ensure the recent commit fixing a
bug with more than INT_MAX spinlock initializations is correct. That
test is somewhat slow, so we might want to disable it after a few
days.
It might be worth retiring s_lock_test after this. The added coverage
of a stuck spinlock probably isn't worth the added complexity?
Author: Andres Freund
Discussion: https://postgr.es/m/20200606023103.avzrctgv7476xj7i@alap3.anarazel.de
|
|
This absorbs a leap-second-related bug fix in localtime.c, and
teaches zic to handle an expiration marker in the leapseconds file.
Neither are of any interest to us (for the foreseeable future
anyway), but we need to stay more or less in sync with upstream.
Also adjust some over-eager changes in the README from commit 957338418.
I have no intention of making changes that require C99 in this code,
until such time as all the live back branches require C99. Otherwise
back-patching will get too exciting.
For the same reason, absorb assorted whitespace and other cosmetic
changes from HEAD into the back branches; mostly this reflects use of
improved versions of pgindent.
All in all then, quite a boring update. But I figured I'd get it
done while I was looking at this code.
|
|
Once the counter goes negative we ended up with spinlocks that errored
out on first use (due to check in tas_sema).
Author: Andres Freund
Reviewed-By: Robert Haas
Discussion: https://postgr.es/m/20200606023103.avzrctgv7476xj7i@alap3.anarazel.de
Backpatch: 9.5-
|
|
Convert buffile.c error handling to use ereport. This fixes cases where
I/O errors were indistinguishable from EOF or not reported. Also remove
"%m" from error messages where errno would be bogus. While we're
modifying those strings, add block numbers and short read byte counts
where appropriate.
Back-patch to all supported releases.
Reported-by: Amit Khandekar <amitdkhan.pg@gmail.com>
Reviewed-by: Melanie Plageman <melanieplageman@gmail.com>
Reviewed-by: Alvaro Herrera <alvherre@2ndquadrant.com>
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Discussion: https://postgr.es/m/CA%2BhUKGJE04G%3D8TLK0DLypT_27D9dR8F1RQgNp0jK6qR0tZGWOw%40mail.gmail.com
|
|
Non-zero vacuum_defer_cleanup_age values cause pg_upgrade freezing of
the system catalogs to be incomplete, or do nothing. This will cause
the upgrade to fail in confusing ways.
Reported-by: Laurenz Albe
Discussion: https://postgr.es/m/7d6f6c22ba05ce0c526e9e8b7bfa8105e7da45e6.camel@cybertec.at
Backpatch-through: 9.5
|
|
SSI's HeapCheckForSerializableConflictOut() test failed to correctly
handle conditions involving a concurrently inserted tuple which is later
concurrently updated by a separate transaction . A SELECT statement
that called HeapCheckForSerializableConflictOut() could end up using the
same XID (updater's XID) for both the original tuple, and the successor
tuple, missing the XID of the xact that created the original tuple
entirely. This only happened when neither tuple from the chain was
visible to the transaction's MVCC snapshot.
The observable symptoms of this bug were subtle. A pair of transactions
could commit, with the later transaction failing to observe the effects
of the earlier transaction (because of the confusion created by the
update to the non-visible row). This bug dates all the way back to
commit dafaa3ef, which added SSI.
To fix, make sure that we check the xmin of concurrently inserted tuples
that happen to also have been updated concurrently.
Author: Peter Geoghegan
Reported-By: Kyle Kingsbury
Reviewed-By: Thomas Munro
Discussion: https://postgr.es/m/db7b729d-0226-d162-a126-8a8ab2dc4443@jepsen.io
Backpatch: All supported versions
|
|
Reported-by: John Naylor
Author: John Naylor
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CACPNZCtRuvs6G+EYqejhVJgBq2AKeZdXRVJsbX4syhO9gn5SNQ@mail.gmail.com
|
|
Previously we used pg_atomic_write_64_impl inside
pg_atomic_init_u64. That works correctly, but on platforms without
64bit single copy atomicity it could trigger spurious valgrind errors
about uninitialized memory, because we use compare_and_swap for atomic
writes on such platforms.
I previously suppressed one instance of this problem (6c878edc1df),
but as Tom reports that wasn't enough. As the atomic variable cannot
yet be concurrently accessible during initialization, it seems better
to have pg_atomic_init_64_impl set the value directly.
Change pg_atomic_init_u32_impl for symmetry.
Reported-By: Tom Lane
Author: Andres Freund
Discussion: https://postgr.es/m/1714601.1591503815@sss.pgh.pa.us
Backpatch: 9.5-
|
|
The redo routines for XLOG_CHECKPOINT_{ONLINE,SHUTDOWN} must acquire
ControlFileLock before modifying ControlFile->checkPointCopy, or the
checkpointer could write out a control file with a bad checksum.
Likewise, XLogReportParameters() must acquire ControlFileLock before
modifying ControlFile and calling UpdateControlFile().
Back-patch to all supported releases.
Author: Nathan Bossart <bossartn@amazon.com>
Author: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Fujii Masao <masao.fujii@oss.nttdata.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Thomas Munro <thomas.munro@gmail.com>
Discussion: https://postgr.es/m/70BF24D6-DC51-443F-B55A-95735803842A%40amazon.com
|
|
Commit 7be5d8df1f74b78620167d3abf32ee607e728919 surfaced the logic
error, which had no functional implications, by adding "use warnings".
The buildfarm always customizes PROVE_FLAGS, so the warning did not
appear there. Back-patch to 9.5 (all supported versions).
|
|
Back-patch to 9.5, where commit 4f700bcd20c087f60346cb8aefd0e269be8e2157
first appeared.
Reviewed by Tom Lane. Reported by Andrew Dunstan.
Discussion: https://postgr.es/m/4dfabec2-a3ad-0546-2d62-f816c97edd0c@2ndQuadrant.com
|
|
This broke the project rule to not call any complex code while a
spinlock is held. Issue introduced by b89e151.
Discussion: https://postgr.es/m/20200602.161518.1399689010416646074.horikyota.ntt@gmail.com
Backpatch-through: 9.5
|
|
This issue has been present since the introduction of this code as of
a3519a2 from 2002, and has been found by buildfarm member prion that
uses RELCACHE_FORCE_RELEASE via the tests introduced recently in
e786be5.
Discussion: https://postgr.es/m/20200601022055.GB4121@paquier.xyz
Backpatch-through: 9.5
|
|
Also add a top-level install-tests target.
Backpatch to all live branches.
Craig Ringer, tweaked by me.
|
|
The repeat() function loops for potentially a long time without
ever checking for interrupts. This prevents, for example, a query
cancel from interrupting until the work is all done. Fix by
inserting a CHECK_FOR_INTERRUPTS() into the loop.
Backpatch to all supported versions.
Discussion: https://www.postgresql.org/message-id/flat/8692553c-7fe8-17d9-cbc1-7cddb758f4c6%40joeconway.com
|
|
When installing binaries and libraries using the MSVC installation
routines, the operation gets done after moving to the root folder, whose
location is detected by checking if "configure" exists two times in a
row. So, calling the installation script from src/tools/msvc/ with an
extra "configure" file four levels up the root path of the code tree
causes the execution to go further up, leading to a failure in finding
the builds. This commit fixes the issue by moving to the root folder of
the code tree only once, when necessary.
Author: Arnold Müller
Reviewed-by: Daniel Gustafsson
Discussion: https://postgr.es/m/16343-f638f67e7e52b86c@postgresql.org
Backpatch-through: 9.5
|
|
Reported-by: Sawada Masahiko
Author: Sawada Masahiko
Reviewed-by: Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CA+fd4k4Ws7M7YQ8PqSym5WB1y75dZeBTd1sZJUQdfe0KJQ-iSA@mail.gmail.com
|
|
The previous coding zeroed out offsetof(ReplicationStateCtl, states)
more bytes than it was entitled to, as a consequence of starting the
zeroing from the wrong pointer (or, if you prefer, using the wrong
calculation of how much to zero).
It's unsurprising that this has not caused any reported problems,
since it can be expected that the newly-allocated block is at the end
of what we've used in shared memory, and we always make the shmem
block substantially bigger than minimally necessary. Nonetheless,
this is wrong and it could bite us someday; plus it's a dangerous
model for somebody to copy.
This dates back to the introduction of this code (commit 5aa235042),
so back-patch to all supported branches.
|
|
_bt_killitems marks btree items dead when a scan leaves the page where
they live, but it does so with only share lock (to improve concurrency).
This was historicall okay, since killing a dead item has no
consequences. However, with the advent of data checksums and
wal_log_hints, this action incurs a WAL full-page-image record of the
page. Multiple concurrent processes would write the same page several
times, leading to WAL bloat. The probability of this happening can be
reduced by only killing items if they're not already dead, so change the
code to do that.
The problem could eliminated completely by having _bt_killitems upgrade
to exclusive lock upon seeing a killable item, but that would reduce
concurrency so it's considered a cure worse than the disease.
Backpatch all the way back to 9.5, since wal_log_hints was introduced in
9.4.
Author: Masahiko Sawada <masahiko.sawada@2ndquadrant.com>
Discussion: https://postgr.es/m/CA+fd4k6PeRj2CkzapWNrERkja5G0-6D-YQiKfbukJV+qZGFZ_Q@mail.gmail.com
|
|
Visual Studio 2015 and later versions should still be able to do the same
as Visual Studio 2012, but the declaration of locale_name is missing in
_locale_t, causing the code compilation to fail, hence this falls back
instead on to enumerating all system locales by using EnumSystemLocalesEx
to find the required locale name. If the input argument is in Unix-style
then we can get ISO Locale name directly by using GetLocaleInfoEx() with
LCType as LOCALE_SNAME.
In passing, change the documentation references of the now obsolete links.
Note that this problem occurs only with NLS enabled builds.
Author: Juan José Santamaría Flecha, Davinder Singh and Amit Kapila
Reviewed-by: Ranier Vilela and Amit Kapila
Backpatch-through: 9.5
Discussion: https://postgr.es/m/CAHzhFSFoJEWezR96um4-rg5W6m2Rj9Ud2CNZvV4NWc9tXV7aXQ@mail.gmail.com
|
|
The defect suppressed a Standby Status Update message when bytes flushed
to disk had changed but bytes received had not changed. If
pg_recvlogical then exited with no intervening Standby Status Update,
the next pg_recvlogical repeated already-flushed records. The defect
could also cause superfluous messages, which are functionally harmless.
Back-patch to 9.5 (all supported versions).
Discussion: https://postgr.es/m/20200502221647.GA3941274@rfd.leadboat.com
|
|
|
|
Source-Git-URL: https://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 5c769f79a22d341c6ea364d879ce33a16b1154d7
|
|
Previously when there were multiple timelines listed in the history file
of the recovery target timeline, archive recovery searched all of them,
starting from the newest timeline to the oldest one, to find the segment
to read. That is, archive recovery had to continuously fail scanning
the segment until it reached the timeline that the segment belonged to.
These scans for non-existent segment could be harmful on the recovery
performance especially when archival area was located on the remote
storage and each scan could take a long time.
To address the issue, this commit changes archive recovery so that
it skips scanning the timeline that the segment to read doesn't belong to.
Per discussion, back-patch to all supported versions.
Author: Kyotaro Horiguchi, tweaked a bit by Fujii Masao
Reviewed-by: David Steele, Pavel Suderevsky, Grigory Smolkin
Discussion: https://postgr.es/m/16159-f5a34a3a04dc67e0@postgresql.org
Discussion: https://postgr.es/m/20200129.120222.1476610231001551715.horikyota.ntt@gmail.com
|
|
Almost all error messages already include file name where relevant, but
this one had been overlooked. Repair.
Backpatch to 9.5.
Author: Euler Taveira <euler.taveira@2ndquadrant.com>
Discussion: https://postgr.es/m/CAH503wA_VOrcKL_43p9atRejCDYmOZ8MzfK9S6TJrQqBqNeAXA@mail.gmail.com
Reviewed-by: Álvaro Herrera <alvherre@alvh.no-ip.org>
|
|
We were acquiring object locks then deleting objects one by one, instead
of acquiring all object locks first, ignoring those that did not exist,
and then deleting all objects together. The latter is the correct
protocol to use, and what this commits changes to code to do. Failing
to follow that leads to "cache lookup failed for relation XYZ" error
reports when DROP OWNED runs concurrently with other DDL -- for example,
a session termination that removes some temp tables.
Author: Álvaro Herrera
Reported-by: Mithun Chicklore Yogendra (Mithun CY)
Reviewed-by: Ahsan Hadi, Tom Lane
Discussion: https://postgr.es/m/CADq3xVZTbzK4ZLKq+dn_vB4QafXXbmMgDP3trY-GuLnib2Ai1w@mail.gmail.com
|
|
Attempting to use an installation path of Python that includes spaces
caused the MSVC builds to fail. This fixes the issue by using the same
quoting method as ad7595b for OpenSSL.
Author: Victor Wagner
Discussion: https://postgr.es/m/20200430150608.6dc6b8c4@antares.wagner.home
Backpatch-through: 9.5
|
|
Writing a trailing semicolon in a macro is almost never the right thing,
because you almost always want to write a semicolon after each macro
call instead. (Even if there was some reason to prefer not to, pgindent
would probably make a hash of code formatted that way; so within PG the
rule should basically be "don't do it".) Thus, if we have a semi inside
the macro, the compiler sees "something;;". Much of the time the extra
empty statement is harmless, but it could lead to mysterious syntax
errors at call sites. In perhaps an overabundance of neatnik-ism, let's
run around and get rid of the excess semicolons whereever possible.
The only thing worse than a mysterious syntax error is a mysterious
syntax error that only happens in the back branches; therefore,
backpatch these changes where relevant, which is most of them because
most of these mistakes are old. (The lack of reported problems shows
that this is largely a hypothetical issue, but still, it could bite
us in some future patch.)
John Naylor and Tom Lane
Discussion: https://postgr.es/m/CACPNZCs0qWTqJ2QUSGJ07B7uvAvzMb-KbG2q+oo+J3tsWN5cqw@mail.gmail.com
|
|
CreateRole() was passing a Value node, not a RoleSpec node, for the
newly-created role name when adding the role as a member of existing
roles for the IN ROLE syntax.
This mistake went unnoticed because the node in question is used only
for error messages and is not accessed on non-error paths.
In older pg versions (such as 9.5 where this was found), this results
in an "unexpected node type" error in place of the real error. That
node type check was removed at some point, after which the code would
accidentally fail to fail on 64-bit platforms (on which accessing the
Value node as if it were a RoleSpec would be mostly harmless) or give
an "unexpected role type" error on 32-bit platforms.
Fix the code to pass the correct node type, and add an lfirst_node
assertion just in case.
Per report on irc from user m1chelangelo.
Backpatch all the way, because this error has been around for a long
time.
|
|
Thanks to Juan José Santamaría Flecha.
Discussion: https://postgr.es/m/5752.1587740484@sss.pgh.pa.us
|
|
Sticking this comment at the end of the last line was a bad idea: it's
not particularly readable, and it tempts pgindent to mess with line
breaks within the comment, which in turn reveals that win32tzlist.pl's
clean_displayname() does the wrong thing to clean up such line breaks.
While that's not hard to fix, there's basically no excuse for this
arrangement to begin with, especially since it makes the table layout
needlessly vary across back branches with different pgindent rules.
Let's just put the comment inside the braces, instead.
This commit just moves and reformats the comments, and updates
win32tzlist.pl to match; there's no actual data change.
Per odd-looking results from Juan José Santamaría Flecha.
Back-patch, since the point is to make win32_tzmap[] look the
same in all supported branches again.
Discussion: https://postgr.es/m/5752.1587740484@sss.pgh.pa.us
|
|
DST law changes in Morocco and the Canadian Yukon.
Historical corrections for Shanghai.
The America/Godthab zone is renamed to America/Nuuk to reflect
current English usage; however, the old name remains available as a
compatibility link.
|
|
The test is proving to have timing issues when looking at archive status
files on standbys after crash recovery, while other parts of the test
rely on pg_stat_archiver as a wait point to make sure that a given state
of the archiving is reached. The coverage is not heavily impacted by
the removal those extra tests.
Per reports from several buildfarm animals, like crake, piculet,
culicidae and francolin.
Discussion: https://postgr.es/m/20200424005929.GK33034@paquier.xyz
Backpatch-through: 9.5
|
|
78ea8b5 has fixed an issue related to the recycling of WAL segments on
standbys depending on archive_mode. However, it has introduced a
regression with the handling of WAL segments ready to be archived during
crash recovery, causing those files to be recycled without getting
archived.
This commit fixes the regression by tracking in shared memory if a live
cluster is either in crash recovery or archive recovery as the handling
of WAL segments ready to be archived is different in both cases (those
WAL segments should not be removed during crash recovery), and by using
this new shared memory state to decide if a segment can be recycled or
not. Previously, it was not possible to know if a cluster was in crash
recovery or archive recovery as the shared state was able to track only
if recovery was happening or not, leading to the problem.
A set of TAP tests is added to close the gap here, making sure that WAL
segments ready to be archived are correctly handled when a cluster is in
archive or crash recovery with archive_mode set to "on" or "always", for
both standby and primary.
Reported-by: Benoît Lobréau
Author: Jehan-Guillaume de Rorthais
Reviewed-by: Kyotaro Horiguchi, Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/20200331172229.40ee00dc@firost
Backpatch-through: 9.5
|
|
Checking if Subject Alternative Names (SANs) from a certificate match
with the hostname connected to leaked memory after each lookup done.
This is broken since acd08d7 that added support for SANs in SSL
certificates, so backpatch down to 9.5.
Author: Roman Peshkurov
Reviewed-by: Hamid Akhtar, Michael Paquier, David Steele
Discussion: https://postgr.es/m/CALLDf-pZ-E3mjxd5=bnHsDu9zHEOnpgPgdnO84E2RuwMCjjyPw@mail.gmail.com
Backpatch-through: 9.5
|
|
index.c supposed that it could just use a PG_TRY block to clean up the
state associated with an active REINDEX operation. However, that code
doesn't run if we do a FATAL exit --- for example, due to a SIGTERM
shutdown signal --- while the REINDEX is happening. And that state does
get consulted during catalog accesses, which makes it problematic if we
do any catalog accesses during shutdown --- for example, to clean up any
temp tables created in the session.
If this combination of circumstances occurred, we could find ourselves
trying to access already-freed memory. In debug builds that'd fairly
reliably cause an assertion failure. In production we might often
get away with it, but with some bad luck it could cause a core dump.
Another possible bad outcome is an erroneous conclusion that an
index-to-be-accessed is being reindexed; but it looks like that would
be unlikely to have any consequences worse than failing to drop temp
tables right away. (They'd still get dropped by the next session that
uses that temp schema.)
To fix, get rid of the use of PG_TRY here, and instead hook into
the transaction abort mechanisms to clean up reindex state.
Per bug #16378 from Alexander Lakhin. This has been wrong for a
very long time, so back-patch to all supported branches.
Discussion: https://postgr.es/m/16378-7a70ca41b3ec2009@postgresql.org
|
|
Apparently in some language versions of Visual Studio nmake outputs some
material after the version number and before the end of the line. This
has been seen in Chinese versions. Therefore, we no longer demand that
the version string comes at the end of a line.
Per complaint from Cuiping Lin.
Backpatch to all live branches.
|
|
ExecReScanHashJoin will destroy the join's hash table if it expects
that the inner relation will produce different rows on rescan.
Up to now it's not bothered to clear the additional pointer to that
hash table that exists in the child HashState node. However, it's
possible for the query to terminate without building a fresh hash
table (this happens if the outer relation is found to be empty
during the final rescan). So we can end with a dangling pointer
to a deleted hash table. That was harmless originally, but since
9.0 EXPLAIN ANALYZE has used that pointer to print hash table
statistics. In debug builds this reproducibly results in garbage
statistics. In non-debug builds there's frequently no ill effects,
but in principle one could get wrong EXPLAIN ANALYZE output, or
perhaps even a crash if free() has released the hashtable memory
back to the OS.
To fix, just make sure we clear the additional pointer when destroying
the hash table. In problematic cases, EXPLAIN ANALYZE will then print
no hashtable statistics (reverting to its pre-9.0 behavior). This isn't
ideal, but since the problem manifests only in unusual corner cases,
it's hard to justify taking any risks to do better in the back
branches. A follow-on patch will improve matters in HEAD.
Konstantin Knizhnik and Tom Lane, per diagnosis by Thomas Munro
of a trouble report from Alvaro Herrera.
Discussion: https://postgr.es/m/20200323165059.GA24950@alvherre.pgsql
|
|
Repair an oversight in commit 8728b2c70: if we're postponing restore
of event triggers to the end, we must also postpone restoring any
comments on them, since of course we cannot create the comments first.
(This opens yet another opportunity for an event trigger to bollix
the restore, but there's no help for that.)
Per bug #16346 from Alexander Lakhin.
Like the previous commit, back-patch to all supported branches.
Hamid Akhtar and Tom Lane
Discussion: https://postgr.es/m/16346-6210ad7a0ea81be1@postgresql.org
|
|
Our documentation describes four allowed input syntaxes for circles,
but the regression tests tried only three ... with predictable
consequences. Remarkably, this has been wrong since the circle
datatype was added in 1997, but nobody noticed till now.
David Zhang, with some help from me
Discussion: https://postgr.es/m/332c47fa-d951-7574-b5cc-a8f7f7201202@highgo.ca
|
|
Since the existing bit number argument can't exceed INT32_MAX, it's
not possible for these functions to manipulate bits beyond the first
256MB of a bytea value. However, it'd be good if they could do at
least that much, and not fall over entirely for longer bytea values.
Adjust the comparisons to be done in int64 arithmetic so that works.
Also tweak the error reports to show sane values in case of overflow.
Also add some test cases to improve the miserable code coverage
of these functions.
Apply patch to back branches only; HEAD has a better solution
as of commit 26a944cf2.
Extracted from a much larger patch by Movead Li
Discussion: https://postgr.es/m/20200312115135445367128@highgo.ca
|
