| Age | Commit message (Collapse) | Author |
|---|
|
This unifies some repetitive code.
Note: I didn't push the "not found" error message into the new
function, even though all existing callers would be able to make use
of it. Using the existing error handling as-is would probably require
exposing the Relation type via tupdesc.h, which doesn't seem
desirable. (Or even if we changed it to just report the OID, it would
inject the concept of a relation containing the tuple descriptor into
tupdesc.h, which might be a layering violation. Perhaps some further
improvements could be considered here separately.)
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da%40eisentraut.org
|
|
When performing inlining LLVM unfortunately "leaks" types (the
types survive and are usable, but a new round of inlining will
recreate new structurally equivalent types). This accumulation
will over time amount to a memory leak which for some queries
can be large enough to trigger the OOM process killer.
To avoid accumulation of types, all IR related data is stored
in an LLVMContextRef which is dropped and recreated in order
to release all types. Dropping and recreating incurs overhead,
so it will be done only after 100 queries. This is a heuristic
which might be revisited, but until we can get the size of the
context from LLVM we are flying a bit blind.
This issue has been reported several times, there may be more
references to it in the archives on top of the threads linked
below.
Backpatching of this fix will be handled once it has matured
in master for a bit.
Reported-By: Justin Pryzby <pryzby@telsasoft.com>
Reported-By: Kurt Roeckx <kurt@roeckx.be>
Reported-By: Jaime Casanova <jcasanov@systemguards.com.ec>
Reported-By: Lauri Laanmets <pcspets@gmail.com>
Author: Andres Freund and Daniel Gustafsson
Discussion: https://postgr.es/m/7acc8678-df5f-4923-9cf6-e843131ae89d@www.fastmail.com
Discussion: https://postgr.es/m/20201218235607.GC30237@telsasoft.com
Discussion: https://postgr.es/m/CAPH-tTxLf44s3CvUUtQpkDr1D8Hxqc2NGDzGXS1ODsfiJ6WSqA@mail.gmail.com
|
|
Commit b059d2f45685a introduced llvm_types_module and accidentally
exported it. As there is no usecase for accessing this variable
externally, this makes it static.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20221101055132.pjjsvlkeo4stbjkq@awork3.anarazel.de
|
|
These types were added in fb46ac26fe but hasn't been used, so
remove until there is a need for them.
Author: Andres Freund <andres@anarazel.de>
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/20221101055132.pjjsvlkeo4stbjkq@awork3.anarazel.de
|
|
pg_logical_slot_get_changes() calls.
The pgoutput module uses a global variable (publish_no_origin) to cache
the action for the origin filter, but we didn't reset the flag when
shutting down the output plugin, so subsequent retries may access the
previous publish_no_origin value.
We fix this by storing the flag in the output plugin's private data.
Additionally, the patch removes the currently unused origin string from the
structure.
For the back branch, to avoid changing the exposed structure, we eliminated the
global variable and instead directly used the origin string for change
filtering.
Author: Hou Zhijie
Reviewed-by: Amit Kapila, Michael Paquier
Backpatch-through: 16
Discussion: http://postgr.es/m/OS0PR01MB571690EF24F51F51EFFCBB0E94FAA@OS0PR01MB5716.jpnprd01.prod.outlook.com
|
|
We started to use this linker switch in commit 9df308697 of
2004-07-13, which was in the OS X 10.3 era. Apparently it's been a
no-op since around OS X 10.9. Apple's most recent toolchain version
actively complains about it, so it's time to get rid of it.
Discussion: https://postgr.es/m/467042.1695766998@sss.pgh.pa.us
|
|
Add a description of the step letters to the --help output.
Author: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Tristen Raab <tristen.raab@highgo.ca>
Discussion: https://www.postgresql.org/message-id/flat/CABwTF4Xbc=K4tFj5Znc8jx0GCufQa577GCDsWD7=71qDnUEOyQ@mail.gmail.com
|
|
Reported-by: Dagfinn Ilmari Mannsåker
Discussion: https://postgr.es/m/87sf9apnr0.fsf@wibble.ilmari.org
Backpatch-through: master
|
|
Mainly, rename "schema" to "columns" and related changes. The
previous naming has long been confusing.
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da%40eisentraut.org
|
|
If the constraint is not already in the list, add it ourselves,
instead of making the caller do it. This makes the interface more
consistent with other "merge" functions in this file.
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da%40eisentraut.org
|
|
Yet another bug in the ilk of commits a7ee7c851 and 741b88435. In
741b88435, we took care to clear the memorized location of the
downlink when we split the parent page, because splitting the parent
page can move the downlink. But we missed that even *updating* a tuple
on the parent can move it, because updating a tuple on a gist page is
implemented as a delete+insert, so the updated tuple gets moved to the
end of the page.
This commit fixes the bug in two different ways (belt and suspenders):
1. Clear the downlink when we update a tuple on the parent page, even
if it's not split. This the same approach as in commits a7ee7c851
and 741b88435.
I also noticed that gistFindCorrectParent did not clear the
'downlinkoffnum' when it stepped to the right sibling. Fix that
too, as it seems like a clear bug even though I haven't been able
to find a test case to hit that.
2. Change gistFindCorrectParent so that it treats 'downlinkoffnum'
merely as a hint. It now always first checks if the downlink is
still at that location, and if not, it scans the page like before.
That's more robust if there are still more cases where we fail to
clear 'downlinkoffnum' that we haven't yet uncovered. With this,
it's no longer necessary to meticulously clear 'downlinkoffnum',
so this makes the previous fixes unnecessary, but I didn't revert
them because it still seems nice to clear it when we know that the
downlink has moved.
Also add the test case using the same test data that Alexander
posted. I tried to reduce it to a smaller test, and I also tried to
reproduce this with different test data, but I was not able to, so
let's just include what we have.
Backpatch to v12, like the previous fixes.
Reported-by: Alexander Lakhin
Discussion: https://www.postgresql.org/message-id/18129-caca016eaf0c3702@postgresql.org
|
|
There was a mismatch between the const qualifiers for
excludeDirContents in src/backend/backup/basebackup.c and
src/bin/pg_rewind/filemap.c, which led to a quick search for similar
cases. We should make excludeDirContents match, but the rest of the
changes seem like a good idea as well.
Author: David Steele <david@pgmasters.net>
Discussion: https://www.postgresql.org/message-id/flat/669a035c-d23d-2f38-7ff0-0cb93e01d610@pgmasters.net
|
|
Make variable naming clearer and more consistent. Move some variables
to smaller scope. Remove some unnecessary intermediate variables.
Try to save some vertical space.
Apply analogous changes to nearby MergeConstraintsIntoExisting() and
RemoveInheritance() for consistency.
Discussion: https://www.postgresql.org/message-id/flat/52a125e4-ff9a-95f5-9f61-b87cf447e4da%40eisentraut.org
|
|
This was added in add5cf28d4 but was apparently never used.
Discussion: https://www.postgresql.org/message-id/flat/f84640e3-00d3-5abd-3f41-e6a19d33c40b@eisentraut.org
|
|
As implemented in 5891c7a8ed8f, setting "force" to true in
pgstat_report_wal() causes the routine to not wait for the pgstat
shmem lock if it cannot be acquired, in which case the WAL and I/O
statistics finish by not being flushed. The origin of the confusion
comes from pgstat_flush_wal() and pgstat_flush_io(), that use "nowait"
as sole argument. The I/O stats are new in v16.
This is the opposite behavior of what has been used in
pgstat_report_stat(), where "force" is the opposite of "nowait". In
this case, when "force" is true, the routine sets "nowait" to false,
which would cause the routine to wait for the pgstat shmem lock,
ensuring that the stats are always flushed. When "force" is false,
"nowait" is set to true, and the stats would only not be flushed if the
pgstat shmem lock can be acquired, returning immediately without
flushing the stats if the lock cannot be acquired.
This commit changes pgstat_report_wal() so as "force" has the same
behavior as in pgstat_report_stat(). There are currently three callers
of pgstat_report_wal():
- Two in the checkpointer where force=true during a shutdown and the
main checkpointer loop. Now the code behaves so as the stats are always
flushed.
- One in the main loop of the bgwriter, where force=false. Now the code
behaves so as the stats would not be flushed if the pgstat shmem lock
could not be acquired.
Before this commit, some stats on WAL and I/O could have been lost after
a shutdown, for example.
Reported-by: Ryoga Yoshida
Author: Ryoga Yoshida, Michael Paquier
Discussion: https://postgr.es/m/f87a4d7be70530606b864fd1df91718c@oss.nttdata.com
Backpatch-through: 15
|
|
bae868ca removed a check that was still needed. If you had an
xl_tot_len at the end of a page that was too small for a record header,
but not big enough to span onto the next page, we'd immediately perform
the CRC check using a bogus large length. Because of arbitrary coding
differences between the CRC implementations on different platforms,
nothing very bad happened on common modern systems. On systems using
the _sb8.c fallback we could segfault.
Restore that check, add a new assertion and supply a test for that case.
Back-patch to 12, like bae868ca.
Tested-by: Tom Lane <tgl@sss.pgh.pa.us>
Tested-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGLCkTT7zYjzOxuLGahBdQ%3DMcF%3Dz5ZvrjSOnW4EDhVjT-g%40mail.gmail.com
|
|
Thanks to commit 2a8b40e368, the logical replication worker type is
easily determined. The worker type could already be deduced via
other columns such as leader_pid and relid, but that is unnecessary
complexity for users.
Bumps catversion.
Author: Peter Smith
Reviewed-by: Michael Paquier, Maxim Orlov, Amit Kapila
Discussion: https://postgr.es/m/CAHut%2BPtmbSMfErSk0S7xxVdZJ9XVE3xVLhqBTmT91kf57BeKDQ%40mail.gmail.com
|
|
For some reason I used not_like = { pg_dumpall_dbprivs => 1, } in the test
condition of one of the tests added in in c66a7d75e65. That doesn't make sense
for two reasons: 1) not_like isn't a valid test condition 2) the database
should not be dumped in any of the tests. Due to 1), the test achieved its
goal, but clearly the formulation is confusing. Instead use like => {}, with
a comment explaining why.
Reported-by: Peter Eisentraut <peter@eisentraut.org>
Discussion: https://postgr.es/m/3ddf79f2-8b7b-a093-11d2-5c739bc64f86@eisentraut.org
Backpatch: 11-, like c66a7d75e65
|
|
Parse analysis of a CallStmt will inject mutable information,
for instance the OID of the called procedure, so that subsequent
DDL may create a need to re-parse the CALL. We failed to detect
this for CALLs in plpgsql routines, because no dependency information
was collected when putting a CallStmt into the plan cache. That
could lead to misbehavior or strange errors such as "cache lookup
failed".
Before commit ee895a655, the issue would only manifest for CALLs
appearing in atomic contexts, because we re-planned non-atomic
CALLs every time through anyway.
It is now apparent that extract_query_dependencies() probably
needs a special case for every utility statement type for which
stmt_requires_parse_analysis() returns true. I wanted to add
something like Assert(!stmt_requires_parse_analysis(...)) when
falling out of extract_query_dependencies_walker without doing
anything, but there are API issues as well as a more fundamental
point: stmt_requires_parse_analysis is supposed to be applied to
raw parser output, so it'd be cheating to assume it will give the
correct answer for post-parse-analysis trees. I contented myself
with adding a comment.
Per bug #18131 from Christian Stork. Back-patch to all supported
branches.
Discussion: https://postgr.es/m/18131-576854e79c5cd264@postgresql.org
|
|
In a 64-bit build there's an awful lot of useless pad space in
ParsedWords. Since we may allocate large arrays of these,
it's worth some effort to reduce their size.
Here we reduce the alen field from uint32 to uint16, and then re-order
the fields to avoid unnecessary padding. alen is only used to
remember the allocated size of the apos[] array, which is not allowed
to exceed MAXNUMPOS (256) elements, so uint16 is plenty of space for
it. That gets us from 40 bytes to 24 on 64-bit builds, and from 20
bytes to 16 on 32-bit builds.
Per discussion of bug #18080. Unfortunately this is an ABI break
so we can't back-patch.
Discussion: https://postgr.es/m/1146921.1695411070@sss.pgh.pa.us
|
|
The initial estimate of the number of distinct ParsedWords is just
that: an estimate. Don't let it exceed what palloc is willing to
allocate. If in fact we need more entries, we'll eventually fail
trying to enlarge the array. But if we don't, this allows success on
inputs that currently draw "invalid memory alloc request size".
Per bug #18080 from Uwe Binder. Back-patch to all supported branches.
Discussion: https://postgr.es/m/18080-d5c5e58fef8c99b7@postgresql.org
|
|
Per gripe from Japin Li.
Discussion: https://postgr.es/m/MEYP282MB16692171F13B5DF40DB768EEB6FCA@MEYP282MB1669.AUSP282.PROD.OUTLOOK.COM
|
|
The --help output stated that schemas were specified using PATTERN
when they in fact aren't pattern matched but are required to be
exact matches. This changes to SCHEMA to make that clear.
Backpatch through v16 where this was introduced.
Author: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Discussion: https://postgr.es/m/CAMyC8qp9mXPQd5D6s6CJxvmignsbTqGZwDDB6VYJOn1A8WG38w@mail.gmail.com
Backpatch-through: 16
|
|
When specifying multiple schemas to exclude with -N parameters, none
of the schemas are actually excluded (a single -N worked as expected).
This fixes the catalog query to handle multiple exclusions and adds a
test for this case.
Backpatch to v16 where this was introduced.
Author: Nathan Bossart <nathandbossart@gmail.com>
Author: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Reported-by: Kuwamura Masaki <kuwamura@db.is.i.nagoya-u.ac.jp>
Discussion: https://postgr.es/m/CAMyC8qp9mXPQd5D6s6CJxvmignsbTqGZwDDB6VYJOn1A8WG38w@mail.gmail.com
Backpatch-through: 16
|
|
Commit cda6a8d01d39 removed a few datatypes, but didn't update
pg_upgrade --check to throw error if these types are used. So the users
find that pg_upgrade --check tells them that everything is fine, only to
fail when the real upgrade is attempted.
Reviewed-by: Tristan Partin <tristan@neon.tech>
Reviewed-by: Suraj Kharage <suraj.kharage@enterprisedb.com>
Discussion: https://postgr.es/m/202309201654.ng4ksea25mti@alvherre.pgsql
|
|
s/messges/messages/
|
|
In order to troubleshoot misbehaving or buggy event triggers, the
documented advice is to enter single-user mode. In an attempt to
reduce the number of situations where single-user mode is required
(or even recommended) for non-extraordinary maintenance, this GUC
allows to temporarily suspend event triggers.
This was originally extracted from a larger patchset which aimed
at supporting event triggers on login events.
Reviewed-by: Ted Yu <yuzhihong@gmail.com>
Reviewed-by: Mikhail Gribkov <youzhick@gmail.com>
Reviewed-by: Justin Pryzby <pryzby@telsasoft.com>
Reviewed-by: Michael Paquier <michael@paquier.xyz
Reviewed-by: Robert Haas <robertmhaas@gmail.com>
Discussion: https://postgr.es/m/9140106E-F9BF-4D85-8FC8-F2D3C094A6D9@yesql.se
Discussion: https://postgr.es/m/0d46d29f-4558-3af9-9c85-7774e14a7709@postgrespro.ru
|
|
s/currect/correct/, accidentally introduced in 608b167f9f9.
|
|
'Q' for 64 bit integers turns out not to work on 32 bit Perl, as
revealed by the build farm. Use 'II' instead, and deal with endianness.
Back-patch to 12, like bae868ca.
Discussion: https://postgr.es/m/ZQ4r1vHcryBsSi_V%40paquier.xyz
|
|
xl_tot_len comes first in a WAL record. Usually we don't trust it to be
the true length until we've validated the record header. If the record
header was split across two pages, previously we wouldn't do the
validation until after we'd already tried to allocate enough memory to
hold the record, which was bad because it might actually be garbage
bytes from a recycled WAL file, so we could try to allocate a lot of
memory. Release 15 made it worse.
Since 70b4f82a4b5, we'd at least generate an end-of-WAL condition if the
garbage 4 byte value happened to be > 1GB, but we'd still try to
allocate up to 1GB of memory bogusly otherwise. That was an
improvement, but unfortunately release 15 tries to allocate another
object before that, so you could get a FATAL error and recovery could
fail.
We can fix both variants of the problem more fundamentally using
pre-existing page-level validation, if we just re-order some logic.
The new order of operations in the split-header case defers all memory
allocation based on xl_tot_len until we've read the following page. At
that point we know that its first few bytes are not recycled data, by
checking its xlp_pageaddr, and that its xlp_rem_len agrees with
xl_tot_len on the preceding page. That is strong evidence that
xl_tot_len was truly the start of a record that was logged.
This problem was most likely to occur on a standby, because
walreceiver.c recycles WAL files without zeroing out trailing regions of
each page. We could fix that too, but it wouldn't protect us from rare
crash scenarios where the trailing zeroes don't make it to disk.
With reliable xl_tot_len validation in place, the ancient policy of
considering malloc failure to indicate corruption at end-of-WAL seems
quite surprising, but changing that is left for later work.
Also included is a new TAP test to exercise various cases of end-of-WAL
detection by writing contrived data into the WAL from Perl.
Back-patch to 12. We decided not to put this change into the final
release of 11.
Author: Thomas Munro <thomas.munro@gmail.com>
Author: Michael Paquier <michael@paquier.xyz>
Reported-by: Alexander Lakhin <exclusion@gmail.com>
Reviewed-by: Noah Misch <noah@leadboat.com> (the idea, not the code)
Reviewed-by: Michael Paquier <michael@paquier.xyz>
Reviewed-by: Sergei Kornilov <sk@zsrv.org>
Reviewed-by: Alexander Lakhin <exclusion@gmail.com>
Discussion: https://postgr.es/m/17928-aa92416a70ff44a2%40postgresql.org
|
|
The SSL tests for pg_ctl restart with an incorrect key passphrase used
the internal _update_pid method to set the pidfile after running pg_ctl
manually instead of using the supplied ->restart method. This refactors
the ->restart method to accept a fail_ok parameter like how ->start and
->stop does, and changes the SSL tests to use this instead. This removes
the need to call internal test module functions.
Reviewed-by: Melih Mutlu <m.melihmutlu@gmail.com>
Reviewed-by: Heikki Linnakangas <hlinnaka@iki.fi>
Discussion: https://postgr.es/m/F81643C4-D7B8-4C6B-AF18-B73839966279@yesql.se
|
|
Guard against the pointer being NULL before pfreeing upon an error
returned from OpenSSL. Also handle errors from X509_NAME_print_ex
which can return -1 on memory allocation errors.
Backpatch down to v15 where the code was added.
Author: Sergey Shinderuk <s.shinderuk@postgrespro.ru>
Discussion: https://postgr.es/m/8db5374d-32e0-6abb-d402-40762511eff2@postgrespro.ru
Backpatch-through: v15
|
|
The computation of the column
information_schema.check_constraints.check_clause used
pg_get_constraintdef() plus some string manipulation to get the check
clause back out. This ended up with an extra pair of parentheses,
which is only an aesthetic problem, but also with suffixes like "NOT
VALID", which don't belong into that column. We can fix both of these
problems and simplify the code by just using pg_get_expr() instead.
Discussion: https://www.postgresql.org/message-id/799b59ef-3330-f0d2-ee23-8cdfa1740987@eisentraut.org
|
|
In older branches, COMMIT/ROLLBACK AND CHAIN failed to propagate
the current transaction's properties to the new transaction if
there was any open subtransaction (unreleased savepoint).
Instead, some previous transaction's properties would be restored.
This is because the "if (s->chain)" check in CommitTransactionCommand
examined the wrong instance of the "chain" flag and falsely
concluded that it didn't need to save transaction properties.
Our regression tests would have noticed this, except they used
identical transaction properties for multiple tests in a row,
so that the faulty behavior was not distinguishable from correct
behavior.
Commit 12d768e70 fixed the problem in v15 and later, but only rather
accidentally, because I removed the "if (s->chain)" test to avoid a
compiler warning, while not realizing that the warning was flagging a
real bug.
In v14 and before, remove the if-test and save transaction properties
unconditionally; just as in the newer branches, that's not expensive
enough to justify thinking harder.
Add the comment and extra regression test to v15 and later to
forestall any future recurrence, but there's no live bug in those
branches.
Patch by me, per bug #18118 from Liu Xiang. Back-patch to v12 where
the AND CHAIN feature was added.
Discussion: https://postgr.es/m/18118-4b72fcbb903aace6@postgresql.org
|
|
As physical replication work at the cluster level and not database
level, any dbname in the connection string is ignored. Proxies and
middleware used in connecting to the cluster might however need to
know the dbname in order to make the correct routing decision for
the connection.
With this the startup packet will include the dbname parameter.
Author: Jelte Fennema-Nio <me@jeltef.nl>
Reviewed-by: Tristen Raab <tristen.raab@highgo.ca>
Reviewed-by: Jim Jones <jim.jones@uni-muenster.de>
Discussion: https://postgr.es/m/CAGECzQTw-dZkVT_RELRzfWRzY714-VaTjoBATYfZq93R8C-auA@mail.gmail.com
|
|
The comment introduced by commit e7cb7ee14 was a bit too terse, which
could lead to extensions doing different things within the hook function
than we intend to allow. Extend the comment to explain what they can do
within the hook function.
Back-patch to all supported branches.
In passing, I rephrased a nearby comment that I recently added to the
back branches.
Reviewed by David Rowley and Andrei Lepikhov.
Discussion: https://postgr.es/m/CAPmGK15SBPA1nr3Aqsdm%2BYyS-ay0Ayo2BRYQ8_A2To9eLqwopQ%40mail.gmail.com
|
|
ae78cae3b added the --buffer-usage-limit to vacuumdb to allow it to
include the BUFFER_USAGE_LIMIT option in the VACUUM command.
Unfortunately, that commit forgot to adjust the code so the option was
added to the ANALYZE command when the -Z command line argument was
specified.
There were no issues with the -z command as that option just adds
ANALYZE to the VACUUM command.
In passing adjust the code to escape the --buffer-usage-limit option
before passing it to the server. It seems nothing beyond a confusing
error message could become this lack of escaping as VACUUM cannot be
specified in a multi-command string.
Reported-by: Ryoga Yoshida
Author: Ryoga Yoshida, David Rowley
Discussion: https://postgr.es/m/08930c0b541700a5264e5fbf3a685f5a%40oss.nttdata.com
Backpatch-through: 16, where ae78cae3b was introduced.
|
|
Thanks to commit 5af0263afd, binaryheap is available to frontend
code. This commit replaces the open-coded heap implementation in
pg_dump_sort.c with a binaryheap, saving a few lines of code.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/3612876.1689443232%40sss.pgh.pa.us
|
|
RelationSyncCache was mentioned in two comments under a different name.
Issue noticed while reviewing a different patch touching the same area.
Introduced by 665d1fad99e7.
Discussion: https://postgr.es/m/ZQk1Ca_eFDTmBiZy@paquier.xyz
|
|
If any of these commands fail during editing or pre-processing, the
command stored in the query buffer would remain around without being
executed immediately as PSQL_CMD_ERROR is returned as status. The next
command provided by the user would run it, likely causing failures as
this could include silently some of the contents generated automatically
for views or functions.
The problems would be different depending on the psql meta-command used:
- For \ev and \ef, some errors can happen in a predictable way while
doing an object lookup or while creating an object command. A failure
while editing is equally problematic, but the class of failures
happening in the code path of do_edit() are unlikely. The query reset
is kept in exec_command_ef_ev() as a query may be unchanged.
- For \e, error can happen while editing.
In both cases, the query buffer is reset on error for an incorrect file
number provided, whose value check is done before filling up the query
buffer.
This is a slight change of behavior compared to the past for some of the
predictable error patterns for \ev and \ef, so for now I have made the
choice to not backpatch this commit (argument particularly available for
v11 that's going to be EOL'd soon). Perhaps this could be revisited
later depending on the feedback of this new behavior.
Author: Ryoga Yoshida, Michael Paquier
Reviewed-by: Aleksander Alekseev, Kyotaro Horiguchi
Discussion: https://postgr.es/m/01419622d84ef093fd4fe585520bf03c@oss.nttdata.com
|
|
Presently, parallel restores spend a lot of time sorting this list
so that we pick the largest items first. With many tables, this
sorting can become a significant bottleneck. There are a couple of
reports from the field about this, and it is easy to reproduce.
This commit improves the performance of parallel pg_restore with
many tables by converting its ready_list to a priority queue, i.e.,
a binary heap. We will first try to run the highest priority item,
but if it cannot be chosen due to the lock heuristic, we'll do a
sequential scan through the heap nodes until we find one that is
runnable. This means that we might end up picking an item with a
much lower priority. However, we expect that we will typically be
able to pick one of the first few items, which should usually have
a relatively high priority.
Suggested-by: Tom Lane
Tested-by: Pierre Ducroquet
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/3612876.1689443232%40sss.pgh.pa.us
|
|
Dollar ($) is a legit character for identifiers, except as the first
character, since commit 1bd22f55cf in version 7.4. Update the
tab-completion code accordingly.
Author: Mikhail Gribkov
Reviewed-by: Vik Fearing
Discussion: https://www.postgresql.org/message-id/CAMEv5_sTAvPvhye%2Bu4jkWDe5UGDiQ1ZkQomnKCboM08zDzOe%3Dg%40mail.gmail.com
|
|
This fixes up 10ea0f924a2 to use the style introduced by 9fd45870c1.
Author: Richard Guo <guofenglinux@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAMbWs490gJf5A=ydqyjh+Z8mVQa_foTGtcmBtHGLra0aOwLWHQ@mail.gmail.com
|
|
The text got the condition backwards, it's "NSN > LSN", not "NSN < LSN".
While we're at it, expand it a little for clarity.
Reviewed-by: Daniel Gustafsson
Discussion: https://www.postgresql.org/message-id/4cb46e18-e688-524a-0f73-b1f03ed5d6ee@iki.fi
|
|
The counter of extend_by loops is mixed int and uint32. Fix by
standardizing from int to uint32, to match the extend_by variable.
Fixup for 31966b151e.
Author: Ranier Vilela <ranier.vf@gmail.com>
Reviewed-by: Gurjeet Singh <gurjeet@singh.im>
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/CAEudQAqHG-JP-YnG54ftL_b7v6-57rMKwET_MSvEoen0UHuPig@mail.gmail.com
|
|
When a snapshot file fails to be read in ImportSnapshot(), it would
issue an ERROR as "invalid snapshot identifier" when opening a stream
for it in read-only mode. The error handling is improved to be more
talkative in failure cases:
- If a snapshot identifier uses incorrect characters, complain with the
same error as before this commit.
- If the snapshot file cannot be found in pg_snapshots/, complain with a
"snapshot \"foo\" does not exist" instead. This maps to the case where
AllocateFile() fails on ENOENT. Based on a suggestion from Andres
Freund.
- If AllocateFile() throws something else than ENOENT as errno, report
it with more details in %m instead, as these failures are never
expected.
b29504eeb489 was the first improvement take. The older error message
exists since bb446b689b66 that introduced snapshot imports. Two test
cases are added to cover the cases of an identifier with an incorrect
format and of a missing snapshot.
Author: Bharath Rupireddy
Reviewed-by: Andres Freund, Daniel Gustafsson, Michael Paquier
Discussion: https://postgr.es/m/CALj2ACWmr=3KdxDkm8h7Zn1XxBoF6hdzq8WQyMn2y1OL5RYFrg@mail.gmail.com
|
|
PLy_elog() was not able to handle correctly cases where a SPI called
failed, which would fill in a DETAIL string able to trigger an
assertion. We may want to improve this infrastructure so as it is able
to provide any extra detail information provided by an error stack, but
this is left as a future improvement as it could impact existing error
stacks and any applications that depend on them. For now, the assertion
is removed and a regression test is added to cover the case of a failure
with a detail string.
This problem exists since 2bd78eb8d51c, so backpatch all the way down
with tweaks to the regression tests output added where required.
Author: Alexander Lakhin
Discussion: https://postgr.es/m/18070-ab9c171cbf4ebb0f@postgresql.org
Backpatch-through: 11
|
|
This commit introduces binaryheap_remove_node(), which can be used
to remove any node from a binary heap. The implementation is
straightforward. The target node is replaced with the last node in
the heap, and then we sift as needed to preserve the heap property.
This new function is intended for use in a follow-up commit that
will improve the performance of pg_restore.
Reviewed-by: Tom Lane
Discussion: https://postgr.es/m/3612876.1689443232%40sss.pgh.pa.us
|
|
After 5af0263afd, binaryheap.c needs to be listed in Mkvcbuild.pm.
Per buildfarm.
|
|
There are a couple of places in frontend code that could make use
of this simple binary heap implementation. This commit makes
binaryheap usable in frontend code, much like commit 26aaf97b68 did
for StringInfo. Like StringInfo, the header file is left in lib/
to reduce the likelihood of unnecessary breakage.
The frontend version of binaryheap exposes a void *-based API since
frontend code does not have access to the Datum definitions. This
seemed like a better approach than switching all existing uses to
void * or making the Datum definitions available to frontend code.
Reviewed-by: Tom Lane, Alvaro Herrera
Discussion: https://postgr.es/m/3612876.1689443232%40sss.pgh.pa.us
|
