| Age | Commit message (Collapse) | Author |
|---|
|
Commit 36a35c550ac114ca turned the interface between ginPlaceToPage and
its subroutines in gindatapage.c and ginentrypage.c into a royal mess:
page-update critical sections were started in one place and finished in
another place not even in the same file, and the very same subroutine
might return having started a critical section or not. Subsequent patches
band-aided over some of the problems with this design by making things
even messier.
One user-visible resulting problem is memory leaks caused by the need for
the subroutines to allocate storage that would survive until ginPlaceToPage
calls XLogInsert (as reported by Julien Rouhaud). This would not typically
be noticeable during retail index updates. It could be visible in a GIN
index build, in the form of memory consumption swelling to several times
the commanded maintenance_work_mem.
Another rather nasty problem is that in the internal-page-splitting code
path, we would clear the child page's GIN_INCOMPLETE_SPLIT flag well before
entering the critical section that it's supposed to be cleared in; a
failure in between would leave the index in a corrupt state. There were
also assorted coding-rule violations with little immediate consequence but
possible long-term hazards, such as beginning an XLogInsert sequence before
entering a critical section, or calling elog(DEBUG) inside a critical
section.
To fix, redefine the API between ginPlaceToPage() and its subroutines
by splitting the subroutines into two parts. The "beginPlaceToPage"
subroutine does what can be done outside a critical section, including
full computation of the result pages into temporary storage when we're
going to split the target page. The "execPlaceToPage" subroutine is called
within a critical section established by ginPlaceToPage(), and it handles
the actual page update in the non-split code path. The critical section,
as well as the XLOG insertion call sequence, are both now always started
and finished in ginPlaceToPage(). Also, make ginPlaceToPage() create and
work in a short-lived memory context to eliminate the leakage problem.
(Since a short-lived memory context had been getting created in the most
common code path in the subroutines, this shouldn't cause any noticeable
performance penalty; we're just moving the overhead up one call level.)
In passing, fix a bunch of comments that had gone unmaintained throughout
all this klugery.
Report: <571276DD.5050303@dalibo.com>
|
|
Per discussion, there doesn't seem to be much value in having
NUM_SPINLOCK_SEMAPHORES set to 1024: under any scenario where you are
running more than a few backends concurrently, you really had better have a
real spinlock implementation if you want tolerable performance. And 1024
semaphores is a sizable fraction of the system-wide SysV semaphore limit
on many platforms. Therefore, reduce this setting's default value to 128
to make it less likely to cause out-of-semaphores problems.
|
|
Careless coding added by commit 07cacba983ef79be could result in a crash
or a bizarre error message if someone tried to select an index on the
OID column as the replica identity index for a table. Back-patch to 9.4
where the feature was introduced.
Discussion: CAKJS1f8TQYgTRDyF1_u9PVCKWRWz+DkieH=U7954HeHVPJKaKg@mail.gmail.com
David Rowley
|
|
The code had a query-lifespan memory leak when encountering GIN entries
that have posting lists (rather than posting trees, ie, there are a
relatively small number of heap tuples containing this index key value).
With a suitable data distribution this could add up to a lot of leakage.
Problem seems to have been introduced by commit 36a35c550, so back-patch
to 9.4.
Julien Rouhaud
|
|
When re-reading an update involving both an old tuple and a new tuple from
disk, reorderbuffer.c was careless about whether the new tuple is suitably
aligned for direct access --- in general, it isn't. We'd missed seeing
this in the buildfarm because the contrib/test_decoding tests exercise this
code path only a few times, and by chance all of those cases have old
tuples with length a multiple of 4, which is usually enough to make the
access to the new tuple's t_len safe. For some still-not-entirely-clear
reason, however, Debian's sparc build gets a bus error, as reported by
Christoph Berg; perhaps it's assuming 8-byte alignment of the pointer?
The lack of previous field reports is probably because you need all of
these conditions to trigger a crash: an alignment-picky platform (not
Intel), a transaction large enough to spill to disk, an update within
that xact that changes a primary-key field and has an odd-length old tuple,
and of course logical decoding tracing the transaction.
Avoid the alignment assumption by using memcpy instead of fetching t_len
directly, and add a test case that exposes the crash on picky platforms.
Back-patch to 9.4 where the bug was introduced.
Discussion: <20160413094117.GC21485@msg.credativ.de>
|
|
As reported by Michael Feld, pg_upgrade'ing an installation having
extensions with operator families that contain just a single operator class
failed to reproduce the extension membership of those operator families.
This caused no immediate ill effects, but would create problems when later
trying to do a plain dump and restore, because the seemingly-not-part-of-
the-extension operator families would appear separately in the pg_dump
output, and then would conflict with the families created by loading the
extension. This has been broken ever since extensions were introduced,
and many of the standard contrib extensions are affected, so it's a bit
astonishing nobody complained before.
The cause of the problem is a perhaps-ill-considered decision to omit
such operator families from pg_dump's output on the grounds that the
CREATE OPERATOR CLASS commands could recreate them, and having explicit
CREATE OPERATOR FAMILY commands would impede loading the dump script into
pre-8.3 servers. Whatever the merits of that decision when 8.3 was being
written, it looks like a poor tradeoff now. We can fix the pg_upgrade
problem simply by removing that code, so that the operator families are
dumped explicitly (and then will be properly made to be part of their
extensions).
Although this fixes the behavior of future pg_upgrade runs, it does nothing
to clean up existing installations that may have improperly-linked operator
families. Given the small number of complaints to date, maybe we don't
need to worry about providing an automated solution for that; anyone who
needs to clean it up can do so with manual "ALTER EXTENSION ADD OPERATOR
FAMILY" commands, or even just ignore the duplicate-opfamily errors they
get during a pg_restore. In any case we need this fix.
Back-patch to all supported branches.
Discussion: <20228.1460575691@sss.pgh.pa.us>
|
|
It turns out that those PyErr_Clear() calls I removed from plpy_elog.c
in 7e3bb080387f4143 et al were not quite as random as they appeared: they
mask a Python 2.3.x bug. (Specifically, it turns out that PyType_Ready()
can fail if the error indicator is set on entry, and PLy_traceback's fetch
of frame.f_code may be the first operation in a session that requires the
"frame" type to be readied. Ick.) Put back the clear call, but in a more
centralized place closer to what it's protecting, and this time with a
comment warning what it's really for.
Per buildfarm member prairiedog. Although prairiedog was only failing
on HEAD, it seems clearly possible for this to occur in older branches
as well, so back-patch to 9.2 the same as the previous patch.
|
|
PLy_elog() could attempt to access strings that Python had already freed,
because the strings that PLy_get_spi_error_data() returns are simply
pointers into storage associated with the error "val" PyObject. That's
fine at the instant PLy_get_spi_error_data() returns them, but just after
that PLy_traceback() intentionally releases the only refcount on that
object, allowing it to be freed --- so that the strings we pass to
ereport() are dangling pointers.
In principle this could result in garbage output or a coredump. In
practice, I think the risk is pretty low, because there are no Python
operations between where we decrement that refcount and where we use the
strings (and copy them into PG storage), and thus no reason for Python
to recycle the storage. Still, it's clearly hazardous, and it leads to
Valgrind complaints when running under a Valgrind that hasn't been
lobotomized to ignore Python memory allocations.
The code was a mess anyway: we fetched the error data out of Python
(clearing Python's error indicator) with PyErr_Fetch, examined it, pushed
it back into Python with PyErr_Restore (re-setting the error indicator),
then immediately pulled it back out with another PyErr_Fetch. Just to
confuse matters even more, there were some gratuitous-and-yet-hazardous
PyErr_Clear calls in the "examine" step, and we didn't get around to doing
PyErr_NormalizeException until after the second PyErr_Fetch, making it even
less clear which object was being manipulated where and whether we still
had a refcount on it. (If PyErr_NormalizeException did substitute a
different "val" object, it's possible that the problem could manifest for
real, because then we'd be doing assorted Python stuff with no refcount
on the object we have string pointers into.)
So, rearrange all that into some semblance of sanity, and don't decrement
the refcount on the Python error objects until the end of PLy_elog().
In HEAD, I failed to resist the temptation to reformat some messy bits
from 5c3c3cd0a3046339 along the way.
Back-patch as far as 9.2, because the code is substantially the same
that far back. I believe that 9.1 has the bug as well; but the code
around it is rather different and I don't want to take a chance on
breaking something for what seems a low-probability problem.
|
|
Found during investigation of failure of skink buildfarm member and its
valgrind report.
Backpatch to all supported branches
|
|
Most of what is produced by the detailed verbosity level is of no
interest at all, so switch to the normal level for more usable output.
Christian Ullrich
Backpatch to all live branches
|
|
As noted by Julian Schauder in bug #14063, the configuration-file parser
doesn't support embedded newlines in string literals. While there might
someday be a good reason to remove that restriction, there doesn't seem
to be one right now. However, ALTER SYSTEM SET could accept strings
containing newlines, since many of the variable-specific value-checking
routines would just see a newline as whitespace. This led to writing a
postgresql.auto.conf file that was broken and had to be removed manually.
Pending a reason to work harder, just throw an error if someone tries this.
In passing, fix several places in the ALTER SYSTEM logic that failed to
provide an errcode() for an ereport(), and thus would falsely log the
failure as an internal XX000 error.
Back-patch to 9.4 where ALTER SYSTEM was introduced.
|
|
The first iteration of the signal-checking loop would compute sigmask(0)
which expands to 1<<(-1) which is undefined behavior according to the
C standard. The lack of field reports of trouble suggest that it
evaluates to 0 on all existing Windows compilers, but that's hardly
something to rely on. Since signal 0 isn't a queueable signal anyway,
we can just make the loop iterate from 1 instead, and save a few cycles
as well as avoiding the undefined behavior.
In passing, avoid evaluating the volatile expression UNBLOCKED_SIGNAL_QUEUE
twice in a row; there's no reason to waste cycles like that.
Noted by Aleksander Alekseev, though this isn't his proposed fix.
Back-patch to all supported branches.
|
|
Whenever this function is used with the FORMAT_MESSAGE_FROM_SYSTEM flag,
it's good practice to include FORMAT_MESSAGE_IGNORE_INSERTS as well.
Otherwise, if the message contains any %n insertion markers, the function
will try to fetch argument strings to substitute --- which we are not
passing, possibly leading to a crash. This is exactly analogous to the
rule about not giving printf() a format string you're not in control of.
Noted and patched by Christian Ullrich.
Back-patch to all supported branches.
|
|
|
|
Source-Git-URL: git://git.postgresql.org/git/pgtranslation/messages.git
Source-Git-Hash: 515f3c859e6f29c11e1e7749591508d6fb761c2c
|
|
Returning the direct result of bit arithmetic, in a macro intended to be
used in a boolean manner, can be problematic if the return value is
stored in a variable of type 'bool'. If bool is implemented using C99's
_Bool, that can lead to comparison failures if the variable is then
compared again with the expression (see ginStepRight() for an example
that fails), as _Bool forces the result to be 0/1. That happens in some
configurations of newer MSVC compilers. It's also problematic when
storing the result of such an expression in a narrower type.
Several gin macros have been declared in that style since gin's initial
commit in 8a3631f8d86.
There's a lot more macros like this, but this is the only one causing
regression test failures; and I don't want to commit and backpatch a
larger patch with lots of conflicts just before the next set of minor
releases.
Discussion: 20150811154237.GD17575@awork2.anarazel.de
Backpatch: All supported branches
|
|
We really need to sync all of our IANA-derived timezone code with upstream,
but that's going to be a large patch and I certainly don't care to shove
such a thing into stable branches immediately before a release. As a
stopgap, copy just the tzcode2016c logic that checks validity of timezone
abbreviations. This prevents getting multiple "time zone abbreviation
differs from POSIX standard" bleats with tzdata 2014b and later.
|
|
DST law changes in Azerbaijan, Chile, Haiti, Palestine, and Russia (Altai,
Astrakhan, Kirov, Sakhalin, Ulyanovsk regions). Historical corrections
for Lithuania, Moldova, Russia (Kaliningrad, Samara, Volgograd).
As of 2015b, the keepers of the IANA timezone database started to use
numeric time zone abbreviations (e.g., "+04") instead of inventing
abbreviations not found in the wild like "ASTT". This causes our rather
old copy of zic to whine "warning: time zone abbreviation differs from
POSIX standard" several times during "make install". This warning is
harmless according to the IANA folk, and I don't see any problems with
these abbreviations in some simple tests; but it seems like now would be
a good time to update our copy of the tzcode stuff. I'll look into that
soon.
|
|
Modern Perl has removed psed from its core distribution, so it might not
be readily available on some build platforms. We therefore replace its
use with a Perl script generated by s2p, which is equivalent to the sed
script. The latter is retained for non-MSVC builds to avoid creating a
new hard dependency on Perl for non-Windows tarball builds.
Backpatch to all live branches.
Michael Paquier and me.
|
|
In HEAD, fix incorrect field width for hours part of OF when tm_gmtoff is
negative. This was introduced by commit 2d87eedc1d4468d3 as a result of
falsely applying a pattern that's correct when + signs are omitted, which
is not the case for OF.
In 9.4, fix missing abs() call that allowed a sign to be attached to the
minutes part of OF. This was fixed in 9.5 by 9b43d73b3f9bef27, but for
inscrutable reasons not back-patched.
In all three versions, ensure that the sign of tm_gmtoff is correctly
reported even when the GMT offset is less than 1 hour.
Add regression tests, which evidently we desperately need here.
Thomas Munro and Tom Lane, per report from David Fetter
|
|
|
|
Previously, we included <xlocale.h> only if necessary to get the definition
of type locale_t. According to notes in PGAC_TYPE_LOCALE_T, this is
important because on some versions of glibc that file supplies an
incompatible declaration of locale_t. (This info may be obsolete, because
on my RHEL6 box that seems to be the *only* definition of locale_t; but
there may still be glibc's in the wild for which it's a live concern.)
It turns out though that on FreeBSD and maybe other BSDen, you can get
locale_t from stdlib.h or locale.h but mbstowcs_l() and friends only from
<xlocale.h>. This was leaving us compiling calls to mbstowcs_l() and
friends with no visible prototype, which causes a warning and could
possibly cause actual trouble, since it's not declared to return int.
Hence, adjust the configure checks so that we'll include <xlocale.h>
either if it's necessary to get type locale_t or if it's necessary to
get a declaration of mbstowcs_l().
Report and patch by Aleksander Alekseev, somewhat whacked around by me.
Back-patch to all supported branches, since we have been using
mbstowcs_l() since 9.1.
|
|
On the machines I tried this on, pressing TAB after SECURITY LABEL led to
being offered ON and FOR as intended, plus random other keywords (varying
across machines). But if you were a bit more unlucky you'd get a crash,
as reported by nummervet@mail.ru in bug #14019.
Seems to have been an aboriginal error in the SECURITY LABEL patch,
commit 4d355a8336e0f226. Hence, back-patch to all supported versions.
There's no bug in HEAD, though, thanks to our recent tab-completion
rewrite.
|
|
The Visual Studio 2013 CRT generates invalid code when it makes a 64-bit
build that is later used on a CPU that supports AVX2 instructions using a
version of Windows before 7SP1/2008R2SP1.
Detect this combination, and in those cases turn off the generation of
FMA3, per recommendation from the Visual Studio team.
The bug is actually in the CRT shipping with Visual Studio 2013, but
Microsoft have stated they're only fixing it in newer major versions.
The fix is therefor conditioned specifically on being built with this
version of Visual Studio, and not previous or later versions.
Author: Christian Ullrich
|
|
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes. Use the previously added durable_rename()/durable_link_or_rename()
in various places where we previously just renamed files.
Most of the changed call sites are arguably not critical, but it seems
better to err on the side of too much durability. The most prominent
known case where the previously missing fsyncs could cause data loss is
crashes at the end of a checkpoint. After the actual checkpoint has been
performed, old WAL files are recycled. When they're filled, their
contents are fdatasynced, but we did not fsync the containing
directory. An OS/hardware crash in an unfortunate moment could then end
up leaving that file with its old name, but new content; WAL replay
would thus not replay it.
Reported-By: Tomas Vondra
Author: Michael Paquier, Tomas Vondra, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
|
|
Renaming a file using rename(2) is not guaranteed to be durable in face
of crashes; especially on filesystems like xfs and ext4 when mounted
with data=writeback. To be certain that a rename() atomically replaces
the previous file contents in the face of crashes and different
filesystems, one has to fsync the old filename, rename the file, fsync
the new filename, fsync the containing directory. This sequence is not
generally adhered to currently; which exposes us to data loss risks. To
avoid having to repeat this arduous sequence, introduce
durable_rename(), which wraps all that.
Also add durable_link_or_rename(). Several places use link() (with a
fallback to rename()) to rename a file, trying to avoid replacing the
target file out of paranoia. Some of those rename sequences need to be
durable as well. There seems little reason extend several copies of the
same logic, so centralize the link() callers.
This commit does not yet make use of the new functions; they're used in
a followup commit.
Author: Michael Paquier, Andres Freund
Discussion: 56583BDD.9060302@2ndquadrant.com
Backpatch: All supported branches
|
|
An index search using a row comparison such as ROW(a, b) > ROW('x', 'y')
would stop upon reaching a NULL entry in the "b" column, ignoring the
fact that there might be non-NULL "b" values associated with later values
of "a". This happens because _bt_mark_scankey_required() marks the
subsidiary scankey for "b" as required, which is just wrong: it's for
a column after the one with the first inequality key (namely "a"), and
thus can't be considered a required match.
This bit of brain fade dates back to the very beginnings of our support
for indexed ROW() comparisons, in 2006. Kind of astonishing that no one
came across it before Glen Takahashi, in bug #14010.
Back-patch to all supported versions.
Note: the given test case doesn't actually fail in unpatched 9.1, evidently
because the fix for bug #6278 (i.e., stopping at nulls in either scan
direction) is required to make it fail. I'm sure I could devise a case
that fails in 9.1 as well, perhaps with something involving making a cursor
back up; but it doesn't seem worth the trouble.
|
|
Python's allocator does some low-level tricks for efficiency;
unfortunately they trigger valgrind errors. Those tricks can be disabled
making instrumentation easier; but few people testing postgres will have
such a build of python. So add broad suppressions of the resulting
errors.
See also https://svn.python.org/projects/python/trunk/Misc/README.valgrind
This possibly will suppress valid errors, but without it it's basically
impossible to use valgrind with plpython code.
Author: Andres Freund
Backpatch: 9.4, where we started to maintain valgrind suppressions
|
|
Author: Andres Freund
Backpatch: 9.4, where we started to maintain valgrind suppressions
|
|
plperl_ref_from_pg_array() didn't consider the case that postgrs arrays
can have 0 dimensions (when they're empty) and accessed the first
dimension without a check. Fix that by special casing the empty array
case.
Author: Alex Hunsaker
Reported-By: Andres Freund / valgrind / buildfarm animal skink
Discussion: 20160308063240.usnzg6bsbjrne667@alap3.anarazel.de
Backpatch: 9.1-
|
|
Coverity and inspection for the issue addressed in fd45d16f found some
questionable code.
Specifically coverity noticed that the wrong length was added in
ReorderBufferSerializeChange() - without immediate negative consequences
as the variable isn't used afterwards. During code-review and testing I
noticed that a bit of space was wasted when allocating tuple bufs in
several places. Thirdly, the debug memset()s in
ReorderBufferGetTupleBuf() reduce the error checking valgrind can do.
Backpatch: 9.4, like c8f621c43.
|
|
A thinko in a96761391 caused pg_ctl to get it exactly backwards when
deciding whether to report problems to the Windows eventlog or to stderr.
Per bug #14001 from Manuel Mathar, who also identified the fix.
Like the previous patch, back-patch to all supported branches.
|
|
In c8f621c43 I forgot to account for MAXALIGN when allocating a new
tuplebuf in ReorderBufferGetTupleBuf(). That happens to currently not
cause active problems on a number of platforms because the affected
pointer is already aligned, but others, like ppc and hppa, trigger this
in the regression test, due to a debug memset clearing memory.
Fix that.
Backpatch: 9.4, like the previous commit.
|
|
There were two places in spell.c that supposed that they could search
for a location in a string produced by lowerstr() and then transpose
the offset into the original string. But this fails completely if
lowerstr() transforms any characters into characters of different byte
length, as can happen in Turkish UTF8 for instance.
We'd added some comments about this coding in commit 51e78ab4ff328296,
but failed to realize that it was not merely confusing but wrong.
Coverity complained about this code years ago, but in such an opaque
fashion that nobody understood what it was on about. I'm not entirely
sure that this issue *is* what it's on about, actually, but perhaps
this patch will shut it up -- and in any case the problem is clear.
Back-patch to all supported branches.
|
|
Backpatch of 9a0a12f683235d3e10b873baba974f6414297a7e.
|
|
When decoding the old version of an UPDATE or DELETE change, and if that
tuple was bigger than MaxHeapTupleSize, we either Assert'ed out, or
failed in more subtle ways in non-assert builds. Normally individual
tuples aren't bigger than MaxHeapTupleSize, with big datums toasted.
But that's not the case for the old version of a tuple for logical
decoding; the replica identity is logged as one piece. With the default
replica identity btree limits that to small tuples, but that's not the
case for FULL.
Change the tuple buffer infrastructure to separate allocate over-large
tuples, instead of always going through the slab cache.
This unfortunately requires changing the ReorderBufferTupleBuf
definition, we need to store the allocated size someplace. To avoid
requiring output plugins to recompile, don't store HeapTupleHeaderData
directly after HeapTupleData, but point to it via t_data; that leaves
rooms for the allocated size. As there's no reason for an output plugin
to look at ReorderBufferTupleBuf->t_data.header, remove the field. It
was just a minor convenience having it directly accessible.
Reported-By: Adam Dratwiński
Discussion: CAKg6ypLd7773AOX4DiOGRwQk1TVOQKhNwjYiVjJnpq8Wo+i62Q@mail.gmail.com
|
|
Somehow I managed to flip the order of restoring old & new tuples when
de-spooling a change in a large transaction from disk. This happens to
only take effect when a change is spooled to disk which has old/new
versions of the tuple. That only is the case for UPDATEs where he
primary key changed or where replica identity is changed to FULL.
The tests didn't catch this because either spooled updates, or updates
that changed primary keys, were tested; not both at the same time.
Found while adding tests for the following commit.
Backpatch: 9.4, where logical decoding was added
|
|
Logical decoding's reorderbuffer keeps transactions in an LSN ordered
list for efficiency. To make that's efficiently possible upper-level
xids are forced to be logged before nested subtransaction xids. That
only works though if these records are all looked at: Unfortunately we
didn't do so for e.g. row level locks, which are otherwise uninteresting
for logical decoding.
This could lead to errors like:
"ERROR: subxact logged without previous toplevel record".
It's not sufficient to just look at row locking records, the xid could
appear first due to a lot of other types of records (which will trigger
the transaction to be marked logged with MarkCurrentTransactionIdLoggedIfAny).
So invent infrastructure to tell reorderbuffer about xids seen, when
they'd otherwise not pass through reorderbuffer.c.
Reported-By: Jarred Ward
Bug: #13844
Discussion: 20160105033249.1087.66040@wrigleys.postgresql.org
Backpatch: 9.4, where logical decoding was added
|
|
Previously recovery_min_apply_delay was applied even before recovery
had reached consistency. This could cause us to wait a long time
unexpectedly for read-only connections to be allowed. It's problematic
because the standby was useless during that wait time.
This patch changes recovery_min_apply_delay so that it's applied once
the database has reached the consistent state. That is, even if the delay
is set, the standby tries to replay WAL records as fast as possible until
it has reached consistency.
Author: Michael Paquier
Reviewed-By: Julien Rouhaud
Reported-By: Greg Clough
Backpatch: 9.4, where recovery_min_apply_delay was added
Bug: #13770
Discussion: http://www.postgresql.org/message-id/20151111155006.2644.84564@wrigleys.postgresql.org
|
|
I wasn't careful enough when back-patching.
|
|
The existing code confuses the byte length of the string (which is
relevant when passing it to pg_strncasecmp) with the character length
of the string (which is relevant when it is used with the SQL substring
function). Separate those two concepts.
Report and patch by Kyotaro Horiguchi, reviewed by Thomas Munro and
reviewed and further revised by me.
|
|
This makes the flag more visible for testers using the default file as a
template, increasing the likelyhood that the test suite will be run.
Also have the flag be displayed in the fake "configure" output, if set.
This patch is two new lines only, but perltidy decides to shift things
around which makes it appear a bit bigger.
Author: Michaël Paquier
Reviewed-by: Craig Ringer
Discussion: https://www.postgresql.org/message-id/CAB7nPqRet6UAP2APhZAZw%3DVhJ6w-Q-gGLdZkrOqFgd2vc9-ZDw%40mail.gmail.com
|
|
A thinko concerning nesting depth caused json_to_record() to produce bogus
output if a field of its input object contained a sub-object with a field
name matching one of the requested output column names. Per bug #13996
from Johann Visagie.
I added a regression test case based on his example, plus parallel tests
for json_to_recordset, jsonb_to_record, jsonb_to_recordset. The latter
three do not exhibit the same bug (which suggests that we may be missing
some opportunities to share code...) but testing seems like a good idea
in any case.
Back-patch to 9.4 where these functions were introduced.
|
|
This error message was written with only ON SELECT rules in mind, but since
then we also made RETURNING-clause targetlists go through the same logic.
This means that you got a rather off-topic error message if you tried to
add a rule with RETURNING to a table having dropped columns. Ideally we'd
just support that, but some preliminary investigation says that it might be
a significant amount of work. Seeing that Nicklas Avén's complaint is the
first one we've gotten about this in the ten years or so that the code's
been like that, I'm unwilling to put much time into it. Instead, improve
the error report by issuing a different message for RETURNING cases, and
revise the associated comment based on this investigation.
Discussion: 1456176604.17219.9.camel@jordogskog.no
|
|
Author: Amit Langote
|
|
It's harmless, but might confuse readers. Seems to have been introduced
in 6bc8ef0b7f1f1df3. Back-patch, just to avoid cosmetic cross-branch
differences.
Amit Langote
|
|
When converting an RTE with securityQuals into a security barrier
subquery RTE, ensure that the Vars in the new subquery's targetlist
all have varlevelsup = 0 so that they correctly refer to the
underlying base relation being wrapped.
The original code was creating new Vars by copying them from existing
Vars referencing the base relation found elsewhere in the query, but
failed to account for the fact that such Vars could come from sublink
subqueries, and hence have varlevelsup > 0. In practice it looks like
this could only happen with nested security barrier views, where the
outer view has a WHERE clause containing a correlated subquery, due to
the order in which the Vars are processed.
Bug: #13988
Reported-by: Adam Guthrie
Backpatch-to: 9.4, where updatable SB views were introduced
|
|
A failure partway through PGLC_localeconv() led to a situation where
the next call would call free_struct_lconv() a second time, leading
to free() on already-freed strings, typically leading to a core dump.
Add a flag to remember whether we need to do that.
Per report from Thom Brown. His example case only provokes the failure
as far back as 9.4, but nonetheless this code is obviously broken, so
back-patch to all supported branches.
|
|
Backpatch to: 9.4
|
|
Back-patch to 9.4, where the suite was introduced.
|
