| Age | Commit message (Collapse) | Author |
|---|
|
This is needed to allow a security-definer function to set a truly secure
value of search_path. Without it, a malicious user can use temporary objects
to execute code with the privileges of the security-definer function. Even
pushing the temp schema to the back of the search path is not quite good
enough, because a function or operator at the back of the path might still
capture control from one nearer the front due to having a more exact datatype
match. Hence, disable searching the temp schema altogether for functions and
operators.
Security: CVE-2007-2138
|
|
|
|
failed (due to lock conflicts or out-of-space). We might have already
extended the index's filesystem EOF before failing, causing the EOF to be
beyond what the metapage says is the last used page. Hence the invariant
maintained by the code needs to be "EOF is at or beyond last used page",
not "EOF is exactly the last used page". Problem was created by my patch
of 2006-11-19 that attempted to repair bug #2737. Since that was
back-patched to 7.4, this needs to be as well. Per report and test case
from Vlastimil Krejcir.
|
|
|
|
|
|
competing alternatives for indexes to use in a bitmap scan. The former
coding took estimated selectivity as an overriding factor, causing it to
sometimes choose indexes that were much slower to scan than ones with a
slightly worse selectivity. It was also too narrow-minded about which
combinations of indexes to consider ANDing. The rewrite makes it pay more
attention to index scan cost than selectivity; this seems sane since it's
impossible to have very bad selectivity with low cost, whereas the reverse
isn't true. Also, we now consider each index alone, as well as adding
each index to an AND-group led by each prior index, for a total of about
O(N^2) rather than O(N) combinations considered. This makes the results
much less dependent on the exact order in which the indexes are
considered. It's still a lot cheaper than an O(2^N) exhaustive search.
A prefilter step eliminates all but the cheapest of those indexes using
the same set of WHERE conditions, to keep the effective value of N down in
scenarios where the DBA has created lots of partially-redundant indexes.
|
|
Merlin Moncure
|
|
fast flow of new fsync requests can prevent mdsync() from ever completing.
This was an unforeseen consequence of a patch added in Mar 2006 to prevent
the fsync request queue from overflowing. Problem identified by Heikki
Linnakangas and independently by ITAGAKI Takahiro; fix based on ideas from
Takahiro-san, Heikki, and Tom.
Back-patch as far as 8.1 because a previous back-patch introduced the problem
into 8.1 ...
|
|
report from David Darville. Back-patch as far as 8.1, which may or may not
have the problem but it seems a safe change anyway.
|
|
return void ends with a SELECT, if that SELECT has a single result that is
also of type void. Without this, it's hard to write a void function that
calls another void function. Per gripe from Peter.
Back-patch as far as 8.0.
|
|
|
|
and GB18030. patches from ITAGAKI Takahiro.
|
|
executed in read_only mode. This could lead to various relatively-subtle
failures, such as an allegedly stable function returning non-stable results.
Bug goes all the way back to the introduction of read-only mode in 8.0.
Per report from Gaetano Mendola.
|
|
did not expect that a DEAD tuple could follow a RECENTLY_DEAD tuple in an
update chain, but because the OldestXmin rule for determining deadness is a
simplification of reality, it is possible for this situation to occur
(implying that the RECENTLY_DEAD tuple is in fact dead to all observers,
but this patch does not attempt to exploit that). The code would follow a
chain forward all the way, but then stop before a DEAD tuple when backing
up, meaning that not all of the chain got moved. This could lead to copying
the chain multiple times (resulting in duplicate copies of the live tuple at
its end), or leaving dangling index entries behind (which, aside from
generating warnings from later vacuums, creates a risk of wrong query
results or bogus duplicate-key errors once the heap slot the index entry
points to is repopulated).
The fix is to recheck HeapTupleSatisfiesVacuum while following a chain
forward, and to stop if a DEAD tuple is reached. Each contiguous group
of RECENTLY_DEAD tuples will therefore be copied as a separate chain.
The patch also adds a couple of extra sanity checks to verify correct
behavior.
Per report and test case from Pavan Deolasee.
|
|
POSIX-style timezone specs that don't exactly match any database entry will
be treated as having correct USA DST rules. Also, document that this can
be changed if you want to use some other DST rules with a POSIX zone spec.
We could consider changing localtime.c's TZDEFRULESTRING, but since that
facility can only deal with one DST transition rule, it seems fairly useless
now; might as well just plan to override it using a "posixrules" entry.
Backpatch as far as 8.0. There isn't much we can do in 7.x ... either your
libc gets it right, or it doesn't.
|
|
to fail if an object was removed between calls to ReadDir() and stat().
Per discussion in pgsql-hackers.
http://archives.postgresql.org/pgsql-hackers/2007-03/msg00671.php
Bug report and patch by Michael Fuhr.
|
|
check_sql_fn_retval allows binary-compatibility cases, the expression
extracted from an inline-able SQL function might have a type that is only
binary-compatible with the declared function result type. To avoid possibly
changing the semantics of the expression, we should insert a RelabelType node
in such cases. This has only been shown to have bad consequences in recent
8.1 and up releases, but I suspect there may be failure cases in the older
branches too, so patch it all the way back. Per bug #3116 from Greg Mullane.
Along the way, fix an omission in eval_const_expressions_mutator: it failed
to copy the relabelformat field when processing a RelabelType. No known
observable failures from this, but it definitely isn't intended behavior.
|
|
It has been wrong for this case since it was first written for 7.1 :-(
Per report from Pavel Hanák.
|
|
|
|
portals using PORTAL_UTIL_SELECT strategy. This is currently significant only
for FETCH queries, which are supposed to include a count in the tag. Seems
it's been broken since 7.4, but nobody noticed before Knut Lehre.
|
|
considered when it is necessary to do so because of a join-order restriction
(that is, an outer-join or IN-subselect construct). The former coding was a
bit ad-hoc and inconsistent, and it missed some cases, as exposed by Mario
Weilguni's recent bug report. His specific problem was that an IN could be
turned into a "clauseless" join due to constant-propagation removing the IN's
joinclause, and if the IN's subselect involved more than one relation and
there was more than one such IN linking to the same upper relation, then the
only valid join orders involve "bushy" plans but we would fail to consider the
specific paths needed to get there. (See the example case added to the join
regression test.) On examining the code I wonder if there weren't some other
problem cases too; in particular it seems that GEQO was defending against a
different set of corner cases than the main planner was. There was also an
efficiency problem, in that when we did realize we needed a clauseless join
because of an IN, we'd consider clauseless joins against every other relation
whether this was sensible or not. It seems a better design is to use the
outer-join and in-clause lists as a backup heuristic, just as the rule of
joining only where there are joinclauses is a heuristic: we'll join two
relations if they have a usable joinclause *or* this might be necessary to
satisfy an outer-join or IN-clause join order restriction. I refactored the
code to have just one place considering this instead of three, and made sure
that it covered all the cases that any of them had been considering.
Backpatch as far as 8.1 (which has only the IN-clause form of the disease).
By rights 8.0 and 7.4 should have the bug too, but they accidentally fail
to fail, because the joininfo structure used in those releases preserves some
memory of there having once been a joinclause between the inner and outer
sides of an IN, and so it leads the code in the right direction anyway.
I'll be conservative and not touch them.
|
|
it was executed in. Someday it might be nice to allow cross-DB commits, but
work would be needed in NOTIFY and perhaps other places. Per Heikki.
|
|
running as a service on Win32.
Per report from Harald Armin Massa.
Backpatch to 8.1.
|
|
get away with not (re)initializing a local variable if the variable is marked
"isconst" and not "isnull". Unfortunately it makes this decision after having
already freed the old value, meaning that something like
for i in 1..10 loop
declare c constant text := 'hi there';
leads to subsequent accesses to freed memory, and hence probably crashes.
(In particular, this is why Asif Ali Rehman's bug leads to crash and not
just an unexpectedly-NULL value for SQLERRM: SQLERRM is marked CONSTANT
and so triggers this error.)
The whole thing seems wrong on its face anyway: CONSTANT means that you can't
change the variable inside the block, not that the initializer expression is
guaranteed not to change value across successive block entries. Hence,
remove the "optimization" instead of trying to fix it.
|
|
DECLARE section needs to know about it. Formerly, everyplace besides DECLARE
that created variables needed to do "plpgsql_add_initdatums(NULL)" to prevent
those variables from being sucked up as part of a subsequent DECLARE block.
This is obviously error-prone, and in fact the SQLSTATE/SQLERRM patch had
failed to do it for those two variables, leading to the bug recently exhibited
by Asif Ali Rehman: a DECLARE within an exception handler tried to reinitialize
SQLERRM.
Although the SQLSTATE/SQLERRM patch isn't in any pre-8.1 branches, and so
I can't point to a demonstrable failure there, it seems wise to back-patch
this into the older branches anyway, just to keep the logic similar to HEAD.
|
|
|
|
thought that it didn't have to reposition the underlying tuplestore if the
portal is atEnd. But this is not so, because tuplestores have separate read
and write cursors ... and the read cursor hasn't moved from the start.
This mistake explains bug #2970 from William Zhang.
Note: the coding here is pretty inefficient, but given that no one has noticed
this bug until now, I'd say hardly anyone uses the case where the cursor has
been advanced before being persisted. So maybe it's not worth worrying about.
|
|
out that ExecEvalVar and friends don't necessarily have access to a tuple
descriptor with correct typmod: it definitely can contain -1, and possibly
might contain other values that are different from the Var's value.
Arguably this should be cleaned up someday, but it's not a simple change,
and in any case typmod discrepancies don't pose a security hazard.
Per reports from numerous people :-(
I'm not entirely sure whether the failure can occur in 8.0 --- the simple
test cases reported so far don't trigger it there. But back-patch the
change all the way anyway.
|
|
|
|
Security: CVE-2007-0555, CVE-2007-0556
|
|
made query plan. Use of ALTER COLUMN TYPE creates a hazard for cached
query plans: they could contain Vars that claim a column has a different
type than it now has. Fix this by checking during plan startup that Vars
at relation scan level match the current relation tuple descriptor. Since
at that point we already have at least AccessShareLock, we can be sure the
column type will not change underneath us later in the query. However,
since a backend's locks do not conflict against itself, there is still a
hole for an attacker to exploit: he could try to execute ALTER COLUMN TYPE
while a query is in progress in the current backend. Seal that hole by
rejecting ALTER TABLE whenever the target relation is already open in
the current backend.
This is a significant security hole: not only can one trivially crash the
backend, but with appropriate misuse of pass-by-reference datatypes it is
possible to read out arbitrary locations in the server process's memory,
which could allow retrieving database content the user should not be able
to see. Our thanks to Jeff Trout for the initial report.
Security: CVE-2007-0556
|
|
we should check that the function code returns the claimed result datatype
every time we parse the function for execution. Formerly, for simple
scalar result types we assumed the creation-time check was sufficient, but
this fails if the function selects from a table that's been redefined since
then, and even more obviously fails if check_function_bodies had been OFF.
This is a significant security hole: not only can one trivially crash the
backend, but with appropriate misuse of pass-by-reference datatypes it is
possible to read out arbitrary locations in the server process's memory,
which could allow retrieving database content the user should not be able
to see. Our thanks to Jeff Trout for the initial report.
Security: CVE-2007-0555
|
|
|
|
The original coding failed (tried to access deallocated memory) if there were
two active call sites (fn_extra pointers) for the same function and the
function definition was updated. Also, if an update of a recursive function
was detected upon nested entry to the function, the existing compiled version
was summarily deallocated, resulting in crash upon return to the outer
instance. Problem observed while studying a bug report from Sergiy
Vyshnevetskiy.
Bug does not exist before 8.1 since older versions just leaked the memory of
obsoleted compiled functions, rather than trying to reclaim it.
|
|
by plpgsql can themselves use SPI --- possibly indirectly, as in the case
of domain_in() invoking plpgsql functions in a domain check constraint.
Per bug #2945 from Sergiy Vyshnevetskiy.
Somewhat arbitrarily, I've chosen to back-patch this as far as 8.0. Given
the lack of prior complaints, it doesn't seem critical for 7.x.
|
|
exactly at the point where we need to insert a new item, the calculation used
the wrong size for the "high key" of the new left page. This could lead to
choosing an unworkable split, resulting in "PANIC: failed to add item to the
left sibling" (or "right sibling") failure. Although this bug has been there
a long time, it's very difficult to trigger a failure before 8.2, since there
was generally a lot of free space on both sides of a chosen split. In 8.2,
where the user-selected fill factor determines how much free space the code
tries to leave, an unworkable split is much more likely. Report by Joe
Conway, diagnosis and fix by Heikki Linnakangas.
|
|
DROP TABLE and DROP DATABASE. Should prevent unexpected "permission denied"
failures on Windows, and is cleaner on other platforms too since we no longer
have to take it on faith that ENOENT is okay during an fsync attempt.
Patched as far back as 8.1; per recent discussion I think we are not going
to worry about Windows-specific issues in 8.0 anymore.
|
|
page about the maximum UTF8 sequence length we support (4 bytes since 8.1,
3 before that). pg_utf2wchar_with_len never got updated to support 4-byte
characters at all, and in any case had a buffer-overrun risk in that it
could produce multiple pg_wchars from what mblen claims to be just one UTF8
character. The only reason we don't have a major security hole is that most
callers allocate worst-case output buffers; the sole exception in released
versions appears to be pre-8.2 iwchareq() (ie, ILIKE), which can be crashed
due to zeroing out its return address --- but AFAICS that can't be exploited
for anything more than a crash, due to inability to control what gets written
there. Per report from James Russell and Michael Fuhr.
Pre-8.1 the risk is much less, but I still think pg_utf2wchar_with_len's
behavior given an incomplete final character risks buffer overrun, so
back-patch that logic change anyway.
This patch also makes sure that UTF8 sequences exceeding the supported
length (whichever it is) are consistently treated as error cases, rather
than being treated like a valid shorter sequence in some places.
|
|
involving unions of types having typmods. Variants of the failure are known
to occur in 8.1 and up; not sure if it's possible in 8.0 and 7.4, but since
the code exists that far back, I'll just patch 'em all. Per report from
Brian Hurt.
|
|
databases.
Apply to the 8.1 branch only, as the new 8.2 (and HEAD) coding does not have
this problem.
|
|
(or other types of pg_class entry): the function pgstat_vacuum_tabstat,
invoked during VACUUM startup, had runtime proportional to the number of
stats table entries times the number of pg_class rows; in other words
O(N^2) if the stats collector's information is reasonably complete.
Replace list searching with a hash table to bring it back to O(N)
behavior. Per report from kim at myemma.com.
Back-patch as far as 8.1; 8.0 and before use different coding here.
|
|
|
|
form '^(foo)$'. Before, these could never be optimized into indexscans.
The recent changes to make psql and pg_dump generate such patterns (for \d
commands and -t and related switches, respectively) therefore represented
a big performance hit for people with large pg_class catalogs, as seen in
recent gripe from Erik Jones. While at it, be more paranoid about
case-sensitivity checking in multibyte encodings, and fix some other
corner cases in which a regex might be interpreted too liberally.
|
|
of increasing size, instead of one at a time. This reduces the memory
management overhead when num_temp_buffers is large: in the previous coding
we would actually waste 50% of the space used for temp buffers, because aset.c
would round the individual requests up to 16K. Problem noted while studying
a performance issue reported by Steven Flatt.
Back-patch as far as 8.1 --- older versions used few enough local buffers
that the issue isn't significant for them.
|
|
ps_TupFromTlist in plan nodes that make use of it. This was being done
correctly in join nodes and Result nodes but not in any relation-scan nodes.
Bug would lead to bogus results if a set-returning function appeared in the
targetlist of a subquery that could be rescanned after partial execution,
for example a subquery within EXISTS(). Bug has been around forever :-(
... surprising it wasn't reported before.
|
|
Australia decided to institute DST with one month's notice ... way to go,
politicians.
|
|
immutable, because their results depend on lc_numeric; this is a longstanding
oversight. We cannot force initdb for this in the back branches, but we can
at least provide correct catalog entries for future installations.
|
|
Per confirmation from Brian Wipf that this is correct and necessary for
Darwin 64-bit.
|
|
Arguably we should do this on *all* platforms, but for the moment I'll be
conservative and just do it where it's demonstrably needed. Per report
from Brian Wipf.
|
|
(in particular, causing the ReadyForQuery message to be eaten) before
returning from do_copy. The only known consequence of failing to do so is
that get_prompt might show a wrong result for the %x transaction status
escape, as reported by Bernd Helmle; but it's possible there are other issues.
Back-patch as far as 7.4, the oldest version supporting %x.
|
