| Age | Commit message (Collapse) | Author |
|---|
|
The initial catalog data for this function failed to set proretset
or provide a prorows estimate. It accidentally worked anyway when
invoked in the FROM clause, because the executor isn't too picky
about this; but the planner didn't expect the function to return
multiple rows, which could lead to bad plans. Also the function
would fail if invoked in the SELECT list.
We can't easily back-patch this fix, but fortunately the bug's
consequences aren't awful in most cases. Getting this right is
mainly an exercise in future-proofing.
Discussion: https://postgr.es/m/1636062.1615141782@sss.pgh.pa.us
|
|
"SELECT pg_import_system_collations(0)" caused an assertion failure.
With a random nonzero argument --- or indeed with zero, in non-assert
builds --- it would happily make pg_collation entries with garbage
values of collnamespace. These are harmless as far as I can tell
(unless maybe the OID happens to become used for a schema, later on?).
In any case this isn't a security issue, since the function is
superuser-only. But it seems like a gotcha for unwary DBAs, so let's
add a check that the given OID belongs to some schema.
Back-patch to v10 where this function was introduced.
|
|
Coverity is still unhappy after commit 190c79884, and after looking
closer I think it might be onto something. The callers of newdfa()
typically drop out if v->err has been set nonzero, which newdfa()
is faithfully doing if it fails. However, what if v->err was already
nonzero before we entered newdfa()? Then newdfa() could succeed and
the caller would promptly leak its result.
I don't think this scenario can actually happen, but the predicate
"v->err is always zero when newdfa() is called" seems difficult to be
entirely sure of; there's a good deal of code that potentially could
get that wrong.
It seems better to adjust the callers to directly check for a null
result instead of relying on ISERR() tests. This is slightly cheaper
than the previous coding anyway.
Lacking evidence that there's any real bug, no back-patch.
|
|
Commit 1eb6d6527a allowed to track replica origin replay progress for 2PC
but it was not complete. It misses to properly track the progress for
rollback prepared especially it missed updating the code for recovery.
Additionally, we need to allow tracking it on subscriber nodes where
wal_level might not be logical.
It is required to track decoding of 2PC which is committed in PG14
(a271a1b50e) and also nobody complained about this till now so not
backpatching it.
Author: Amit Kapila
Reviewed-by: Michael Paquier and Ajin Cherian
Discussion: https://postgr.es/m/CAA4eK1L-kHmMnSdrRW6UhRbCjR7cgh04c+6psY15qzT6ktcd+g@mail.gmail.com
|
|
This can be used as a checksum for unordered sets. bit_and and bit_or
already exist.
Author: Alexey Bashtanov <bashtanov@imap.cc>
Reviewed-by: Ibrar Ahmed <ibrar.ahmad@gmail.com>
Discussion: https://www.postgresql.org/message-id/flat/9d4582ae-ecfc-3a13-2238-6ab5a37c1f41@imap.cc
|
|
Using pgbench in an environment with both PGPORT and PGUSER set would
have caused the generation of a debug log with an incorrect database
name due to an oversight in 412893b. Not specifying user, port and/or
database using the option switches, without their respective environment
variables, generated a log entry with empty strings, which was
rather useless.
This commit fixes this set of issues by simplifying the logic grabbing
the connection information, removing a set of getenv() calls that
emulated what libpq already does. The faulty debug log now directly
uses the information from the libpq connection, and it gets generated
after the connection to the backend is completed, not before it (in the
event of a failure libpq would complain with more information about the
connection attempt so the log is not really useful before anyway).
Author: Kota Miyake
Reviewed-by: Fujii Masao, Michael Paquier
Discussion: https://postgr.es/m/026b3ae6fc339a18394d053c32a4463d@oss.nttdata.com
|
|
These can be set in buildenv.pl or a "set" command within a Windows
terminal. The MSVC script vcregress.pl parses the values available in
the environment to build the resulting prove commands, and the parsing
of PROVE_TESTS is able to handle name patterns in the same way as other
platforms.
Not specifying those environment values makes vcregress.pl fall back to
the previous default, with no extra flags for the prove command, and all
the tests run within t/.
Author: Michael Paquier
Reviewed-by: Juan José Santamaría Flecha, Julien Rouhaud
Discussion: https://postgr.es/m/YD9GigwHoL6lFY2y@paquier.xyz
|
|
Under windows, psql processes need to be ended explicitly, or the TAP
tests hang. However, the recovery tests were doing this via
IPC::Run::kill_kill(), which causes other major problems on Windows.
We solve this by instead sending '\q' to psql so it quits of its own
accord, and then simply waiting for it. This means we can now run almost
all the recovery tests on all Windows platforms.
Discussion: https://postgr.es/m/20210301200715.tdjpuesfzebpffgn@alap3.anarazel.de
|
|
Mistake in f06b1c598254f8adb2b7f51d6a7685618a7fb121: We should only
check the version of the binaries in the target installation. The
source installation can of course be of a different version.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/E1lHNKN-0005IC-V6%40gemulon.postgresql.org
|
|
Previously psql obtained the value of PGUSER twice to display
a default user in its help message.
Author: Kota Miyake
Reviewed-by: Nitin Jadhav, Fujii Masao
Discussion: https://postgr.es/m/2a3c612babdd6ed63a9d877bb575d793@oss.nttdata.com
|
|
Contrary to what the comment said, the postmaster does in fact end all
its messages in a newline, since server version 7.2. Be tidy and don't
add an extra newline if the error message already has one.
Discussion: https://www.postgresql.org/message-id/CAFBsxsEdgMXc%2BtGfEy9Y41i%3D5pMMjKeH8t8vSAypR3ZnAoQnHg%40mail.gmail.com
|
|
Protocol version 3 was introduced in PostgreSQL 7.4. There shouldn't be
many clients or servers left out there without version 3 support. But as
a courtesy, I kept just enough of the old protocol support that we can
still send the "unsupported protocol version" error in v2 format, so that
old clients can display the message properly. Likewise, libpq still
understands v2 ErrorResponse messages when establishing a connection.
The impetus to do this now is that I'm working on a patch to COPY
FROM, to always prefetch some data. We cannot do that safely with the
old protocol, because it requires parsing the input one byte at a time
to detect the end-of-copy marker.
Reviewed-by: Tom Lane, Alvaro Herrera, John Naylor
Discussion: https://www.postgresql.org/message-id/9ec25819-0a8a-d51a-17dc-4150bb3cca3b%40iki.fi
|
|
This has been in the SQL spec since 2008. It's a pretty thin
wrapper around the array slice functionality, but the spec
says we should have it, so here it is.
Vik Fearing, reviewed by Dian Fay
Discussion: https://postgr.es/m/fc92ce17-9655-8ff1-c62a-4dc4c8ccd815@postgresfriends.org
|
|
Feed the desired command to psql via "-c" not stdin, else Perl
may complain that it can't push stdin to an already-failed psql
process, as seen in intermittent buildfarm failures.
Make some minor cosmetic improvements while at it.
Before commit ee28cacf6 we had no tests here that expected failure
to connect, so there seems no need for a back-patch.
Discussion: https://postgr.es/m/CALDaNm2mo8YED=M2ZJKGf1U3F3mw6SaQuLXWCK8rZP6sECYcrA@mail.gmail.com
|
|
This expands the binary validation in pg_upgrade with a version
check per binary to ensure that the target cluster installation
only contains binaries from the target version.
In order to reduce duplication, validate_exec is exported from
port.h and the local copy in pg_upgrade is removed.
Author: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://www.postgresql.org/message-id/flat/9328.1552952117@sss.pgh.pa.us
|
|
|
|
Per buildfarm; this fix is from Michael Paquier (vignesh C
proposed nearly the same).
Discussion: https://postgr.es/m/YD8IZ9OKfUf9X1eF@paquier.xyz
|
|
Replace the Perl code previously used to generate specialized sort
functions with sort_template.h.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CA%2BhUKGJ2-eaDqAum5bxhpMNhvuJmRDZxB_Tow0n-gse%2BHG0Yig%40mail.gmail.com
|
|
Reduce duplication by using the new template.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CA%2BhUKGJ2-eaDqAum5bxhpMNhvuJmRDZxB_Tow0n-gse%2BHG0Yig%40mail.gmail.com
|
|
Move our qsort implementation into a header that can be used to define
specialized functions for better performance and reduced duplication.
Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
Discussion: https://postgr.es/m/CA%2BhUKGJ2-eaDqAum5bxhpMNhvuJmRDZxB_Tow0n-gse%2BHG0Yig%40mail.gmail.com
|
|
Commit 0aa8a01d04 extends the output plugin API to allow decoding of
prepared xacts and allowed the user to enable/disable the two-phase option
via pg_logical_slot_get_changes(). This can lead to a problem such that
the first time when it gets changes via pg_logical_slot_get_changes()
without two_phase option enabled it will not get the prepared even though
prepare is after consistent snapshot. Now next time during getting changes,
if the two_phase option is enabled it can skip prepare because by that
time start decoding point has been moved. So the user will only get commit
prepared.
Allow to enable/disable this option at the create slot time and default
will be false. It will break the existing slots which is fine in a major
release.
Author: Ajin Cherian
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
|
|
In addition to the existing options of "any" and "read-write", we
now support "read-only", "primary", "standby", and "prefer-standby".
"read-write" retains its previous meaning of "transactions are
read-write by default", and "read-only" inverts that. The other
three modes test specifically for hot-standby status, which is not
quite the same thing. (Setting default_transaction_read_only on
a primary server renders it read-only to this logic, but not a
standby.)
Furthermore, if talking to a v14 or later server, no extra network
round trip is needed to detect the session's status; the GUC_REPORT
variables delivered by the server are enough. When talking to an
older server, a SHOW or SELECT query is issued to detect session
read-only-ness or server hot-standby state, as needed.
Haribabu Kommi, Greg Nancarrow, Vignesh C, Tom Lane; reviewed at
various times by Laurenz Albe, Takayuki Tsunakawa, Peter Smith.
Discussion: https://postgr.es/m/CAF3+xM+8-ztOkaV9gHiJ3wfgENTq97QcjXQt+rbFQ6F7oNzt9A@mail.gmail.com
|
|
This option provides REINDEX (TABLESPACE) for reindexdb, applying the
tablespace value given by the caller to all the REINDEX queries
generated.
While on it, this commit adds some tests for REINDEX TABLESPACE, with
and without CONCURRENTLY, when run on toast indexes and tables. Such
operations are not allowed, and toast relation names are not stable
enough to be part of the main regression test suite (even if using a PL
function with a TRY/CATCH logic, as CONCURRENTLY could not be tested).
Author: Michael Paquier
Reviewed-by: Mark Dilger, Daniel Gustafsson
Discussion: https://postgr.es/m/YDiaDMnzLICqeukl@paquier.xyz
|
|
Add documenting assertion. This makes it easier to follow how we
maintain the top parent link in target subtree's half-dead/leaf level
page.
|
|
Adjust some "can't happen" error messages that assumed that the page
deletion target page must be a half-dead page. This assumption was
wrong in the case of an internal target page. Simply refer to these
pages as the target page instead.
Internal pages are never marked half-dead. There is exactly one
half-dead page for each subtree undergoing deletion. The half-dead page
is also the target subtree's leaf-level page. This has been the case
since commit efada2b8, which totally overhauled nbtree page deletion.
|
|
This allows clients to find out the setting at connection time without
having to expend a query round trip to do so; which is helpful when
trying to identify read/write servers. (One must also look at
in_hot_standby, but that's already GUC_REPORT, cf bf8a662c9.)
Modifying libpq to make use of this will come soon, but I felt it
cleaner to push the server change separately.
Haribabu Kommi, Greg Nancarrow, Vignesh C; reviewed at various times
by Laurenz Albe, Takayuki Tsunakawa, Peter Smith.
Discussion: https://postgr.es/m/CAF3+xM+8-ztOkaV9gHiJ3wfgENTq97QcjXQt+rbFQ6F7oNzt9A@mail.gmail.com
|
|
On Windows, CMD.EXE allegedly does not run a command that uses forward slashes,
so let's convert the path to use backslashes instead.
Backpatch to 10.
Author: Nitin Jadhav <nitinjadhavpostgres@gmail.com>
Reviewed-by: Juan José Santamaría Flecha <juanjo.santamaria@gmail.com>
Discussion: https://postgr.es/m/CAMm1aWaNDuaPYFYMAqDeJrZmPtNvLcJRS++CcZWY8LT6KcoBZw@mail.gmail.com
|
|
This extends the changes made in commit cebc1d34e, teaching
parseqatom() to generate fewer or cheaper subre nodes in some edge
cases. The case of interest here is a quantified atom that is "messy"
only because it has greediness opposite to what preceded it (whereas
captures and backrefs are intrinsically messy). In this case we don't
need an iteration node, since we don't care where the sub-matches of
the quantifier are; and we might also not need a second concatenation
node. This seems of only marginal real-world use according to my
testing, but I wanted to get it in before wrapping up this series of
regex performance fixes.
Discussion: https://postgr.es/m/1340281.1613018383@sss.pgh.pa.us
|
|
In some cases, at the time that we're doing an NFA-based precheck
of whether a backref subexpression can match at a particular place
in the string, we already know which substring the referenced
subexpression matched. If so, we might as well forget about the NFA
and just compare the substring; this is faster and it gives an exact
rather than approximate answer.
In general, this optimization can help while we are prechecking within
the second child expression of a concat node, while the capture was
within the first child expression; then the substring was saved during
cdissect() of the first child and will be available to NFA checks done
while cdissect() recurses into the second child. It can help quite a
lot if the tree looks like
concat
/ \
capture concat
/ \
expensive stuff backref
as we will be able to avoid recursively dissecting the "expensive
stuff" before discovering that the backref isn't satisfied with a
particular midpoint that the lower concat node is testing. This
doesn't help if the concat tree is left-deep, as the capture node
won't get set soon enough (and it's hard to fix that without changing
the engine's match behavior). Fortunately, right-deep concat trees
are the common case.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/661609.1614560029@sss.pgh.pa.us
|
|
POSIX defines the behavior of back-references thus:
The back-reference expression '\n' shall match the same (possibly
empty) string of characters as was matched by a subexpression
enclosed between "\(" and "\)" preceding the '\n'.
As far as I can see, the back-reference is supposed to consider only
the data characters matched by the referenced subexpression. However,
because our engine copies the NFA constructed from the referenced
subexpression, it effectively enforces any constraints therein, too.
As an example, '(^.)\1' ought to match 'xx', or any other string
starting with two occurrences of the same character; but in our code
it does not, and indeed can't match anything, because the '^' anchor
constraint is included in the backref's copied NFA. If POSIX intended
that, you'd think they'd mention it. Perl for one doesn't act that
way, so it's hard to conclude that this isn't a bug.
Fix by modifying the backref's NFA immediately after it's copied from
the reference, replacing all constraint arcs by EMPTY arcs so that the
constraints are treated as automatically satisfied. This still allows
us to enforce matching rules that depend only on the data characters;
for example, in '(^\d+).*\1' the NFA matching step will still know
that the backref can only match strings of digits.
Perhaps surprisingly, this change does not affect the results of any
of a rather large corpus of real-world regexes. Nonetheless, I would
not consider back-patching it, since it's a clear compatibility break.
Patch by me, reviewed by Joel Jacobson
Discussion: https://postgr.es/m/661609.1614560029@sss.pgh.pa.us
|
|
The same test for REINDEX (VERBOSE) was done twice, while it is clear
that the second test should use --concurrently. Issue introduced in
5dc92b8, for what looks like a copy-paste mistake.
Reviewed-by: Mark Dilger
Discussion: https://postgr.es/m/A7AE97EA-F4B0-4CAB-8FFF-3FECD31F9D63@enterprisedb.com
Backpatch-through: 12
|
|
The same code pattern was repeated twice to enable or disable ROW LEVEL
SECURITY with an ALTER TABLE command. This makes the code slightly
cleaner.
Author: Justin Pryzby
Reviewed-by: Zhihong Yu
Discussion: https://postgr.es/m/20210228211854.GC20769@telsasoft.com
|
|
Point to the specific line where the error was detected; the
previous code tended to include several preceding lines as well.
Avoid re-scanning the entire input to recompute which line that
was. Simplify the logic a bit. Add test cases.
Simon Riggs and Hamid Akhtar, reviewed by Daniel Gustafsson and myself
Discussion: https://postgr.es/m/CANbhV-EPBnXm3MF_TTWBwwqgn1a1Ghmep9VHfqmNBQ8BT0f+_g@mail.gmail.com
|
|
Commit 814f1d8b removed the behavior described.
Reported-by: Amit Kapila <amit.kapila16@gmail.com>
|
|
The psql processes were not explicitly killed (but would eventually
exit due postgres shutting down). For some reason windows perl doesn't
like that, resulting in errors like
Warning: unable to close filehandle GEN20 properly: Bad file descriptor during global destruction.
The test was introduced in d6734a897e3, so no backpatching necessary.
|
|
Adjust the condition variable sleep loop to work correctly when code
reached by its internal CHECK_FOR_INTERRUPTS() call interacts with
another condition variable.
There are no such cases currently, but a proposed patch would do this.
Discussion: https://postgr.es/m/CA+hUKGLdemy2gBm80kz20GTe6hNVwoErE8KwcJk6-U56oStjtg@mail.gmail.com
|
|
Instead of a poll/sleep loop, use a condition variable for precise
wake-up whenever a backend's pss_barrierGeneration advances.
Discussion: https://postgr.es/m/CA+hUKGLdemy2gBm80kz20GTe6hNVwoErE8KwcJk6-U56oStjtg@mail.gmail.com
|
|
In commit a271a1b50e, we allowed decoding at prepare time and the prepare
was decoded again if there is a restart after decoding it. It was done
that way because we can't distinguish between the cases where we have not
decoded the prepare because it was prior to consistent snapshot or we have
decoded it earlier but restarted. To distinguish between these two cases,
we have introduced an initial_consistent_point at the slot level which is
an LSN at which we found a consistent point at the time of slot creation.
This is also the point where we have exported a snapshot for the initial
copy. So, prepare transaction prior to this point are sent along with
commit prepared.
This commit bumps SNAPBUILD_VERSION because of change in SnapBuild. It
will break existing slots which is fine in a major release.
Author: Ajin Cherian, based on idea by Andres Freund
Reviewed-by: Amit Kapila and Vignesh C
Discussion: https://postgr.es/m/d0f60d60-133d-bf8d-bd70-47784d8fabf3@enterprisedb.com
|
|
This avoids the need to set up and tear down a fresh WaitEventSet every
time we need need to wait. We have to add an explicit exit on
postmaster exit (FeBeWaitSet isn't set up to do that automatically), so
move the code to do that into a new function to avoid repetition.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com> (earlier version)
Discussion: https://postgr.es/m/CA%2BhUKGJAC4Oqao%3DqforhNey20J8CiG2R%3DoBPqvfR0vOJrFysGw%40mail.gmail.com
|
|
Previously we used 0 and 1 to refer to the socket and latch in far flung
parts of the tree, without any explanation. Also use PGINVALID_SOCKET
rather than -1 in a couple of places that didn't already do that.
Reviewed-by: Kyotaro Horiguchi <horikyota.ntt@gmail.com>
Discussion: https://postgr.es/m/CA%2BhUKGJAC4Oqao%3DqforhNey20J8CiG2R%3DoBPqvfR0vOJrFysGw%40mail.gmail.com
|
|
Commit a271a1b50e introduced decoding at prepare time in ReorderBuffer.
This can lead to deadlock for out-of-core logical replication solutions
that uses this feature to build distributed 2PC in case such transactions
lock [user] catalog tables exclusively. They need to inform users to not
have locks on catalog tables (via explicit LOCK command) in such
transactions.
Reported-by: Andres Freund
Discussion: https://postgr.es/m/20210222222847.tpnb6eg3yiykzpky@alap3.anarazel.de
|
|
Cut down on system calls and other overheads by waiting for SIGURG
explicitly with kqueue instead of using a signal handler and self-pipe.
Affects *BSD and macOS systems.
This leaves only the poll implementation with a signal handler and the
traditional self-pipe trick.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
|
|
Cut down on system calls and other overheads by reading from a signalfd
instead of using a signal handler and self-pipe. Affects Linux sytems,
and possibly others including illumos that implement the Linux epoll and
signalfd interfaces.
Reviewed-by: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
|
|
Traditionally, SIGUSR1 has been overloaded for ad-hoc signals,
procsignal.c signals and latch.c wakeups. Move that last use over to a
new dedicated signal. SIGURG is normally used to report out-of-band
socket data, but PostgreSQL doesn't use that facility.
The signal handler is now installed in all postmaster children by
InitializeLatchSupport(). Those wishing to disconnect from it should
call ShutdownLatchSupport().
Future patches will use this separation of signals to avoid the need for
a signal handler on some operating systems.
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
|
|
Don't send signals to processes that aren't sleeping.
Author: Andres Freund <andres@anarazel.de>
Discussion: https://postgr.es/m/CA+hUKGJjxPDpzBE0a3hyUywBvaZuC89yx3jK9RFZgfv_KHU7gg@mail.gmail.com
|
|
Commit 82ebbeb0 added a workaround for systems with no epoll_create1()
and EPOLL_CLOEXEC. Linux < 2.6.27 and glibc < 2.9 are long gone. Now
seems like a good time to drop the extra code, because otherwise we'd
have to add similar already-dead workaround code to new patches using
XXX_CLOEXEC flags that arrived in the same kernel release.
Reviewed-by: Tom Lane <tgl@sss.pgh.pa.us>
Discussion: https://postgr.es/m/CA%2BhUKGKL_%3DaO%3Dr30N%3Ds9VoDgTqHpRSzePRbA9dkYO7snc7HsxA%40mail.gmail.com
|
|
The last use of ecnt was in 12788ae. It was getting incremented after a
backend error without any purpose since then, so let's get rid of it.
Author: Kota Miyake
Reviewed-by: Álvaro Herrera
Discussion: https://postgr.es/m/786c3d9fbe067763d899e78c296f9f0f@oss.nttdata.com
|
|
AfterTriggerSaveEvent() wrongly allocates the slot in execution-span
memory context, whereas the correct thing is to allocate it in
a transaction-span context, because that's where the enclosing
AfterTriggersTableData instance belongs into.
Backpatch to 12 (the test back to 11, where it works well with no code
changes, and it's good to have to confirm that the case was previously
well supported); this bug seems introduced by commit ff11e7f4b9ae.
Reported-by: Bertrand Drouvot <bdrouvot@amazon.com>
Author: Amit Langote <amitlangote09@gmail.com>
Discussion: https://postgr.es/m/39a71864-b120-5a5c-8cc5-c632b6f16761@amazon.com
|
|
Mistakenly forgotten in bb437f995
|
|
This adds a new executor node named TID Range Scan. The query planner
will generate paths for TID Range scans when quals are discovered on base
relations which search for ranges on the table's ctid column. These
ranges may be open at either end. For example, WHERE ctid >= '(10,0)';
will return all tuples on page 10 and over.
To support this, two new optional callback functions have been added to
table AM. scan_set_tidrange is used to set the scan range to just the
given range of TIDs. scan_getnextslot_tidrange fetches the next tuple
in the given range.
For AMs were scanning ranges of TIDs would not make sense, these functions
can be set to NULL in the TableAmRoutine. The query planner won't
generate TID Range Scan Paths in that case.
Author: Edmund Horner, David Rowley
Reviewed-by: David Rowley, Tomas Vondra, Tom Lane, Andres Freund, Zhihong Yu
Discussion: https://postgr.es/m/CAMyN-kB-nFTkF=VA_JPwFNo08S0d-Yk0F741S2B7LDmYAi8eyA@mail.gmail.com
|
